Relevant bibliographies by topics / Angle flux

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Angle flux'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Angle flux.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Angle flux"

1

Mandasari, Dewi Rianti, Budi Sudiarto, Lia Amelia, and Asep Andi Suryandi. "Reducing Cogging Torque in V-Shaped BLDC Motors: A FEA Simulation Study on the Impact of Skew Angle." Mekanika: Majalah Ilmiah Mekanika 23, no. 1 (2024): 64. http://dx.doi.org/10.20961/mekanika.v23i1.83242.

Full text
Abstract:
This study thoroughly investigated the impact of stator skew angles on cogging torque in V-shape Brushless Direct Current (BLDC) motors, focusing on electric vehicle applications. Using Finite Element Analysis (FEA) with ANSYS Maxwell, the research assessed how variations in stator core skewness affect torque performance, prioritizing the reduction of cogging torque known for inducing undesirable fluctuations during rotor movement, impacting motor smoothness and noise levels. FEA calculations reveal a significant reduction in cogging torque with the introduction of skew angles to the stator co
APA, Harvard, Vancouver, ISO, and other styles
2

Howard, Robert F. "The Development of Sunspot Groups." International Astronomical Union Colloquium 141 (1993): 492–94. http://dx.doi.org/10.1017/s0252921100029699.

Full text
Abstract:
AbstractIt is shown that the growth and decay rates of sunspot groups are both a function of the axial tilt angles of the groups. Both of these rates reach a maximum near the average tilt angle, which is around +5°, not 0°. (A positive tilt angle represents the situation where the leading spots are equatorward of the following spots). The fact that this peak angle is close to the average tilt and not 0° suggests that this may be the orientation of the subsurface toroidal flux tube(s) from which the sunspot groups form. In general, spot groups with positive tilt angles show faster average perce
APA, Harvard, Vancouver, ISO, and other styles
3

Mohammed, Akeel A., Mahmoud A. Mashkour, and Raad Shehab Ahmed. "NATURAL CONVECTION HEAT TRANSFER IN AN INCLINED CIRCULAR CYLINDER." Journal of Engineering 17, no. 04 (2011): 659–74. http://dx.doi.org/10.31026/j.eng.2011.04.04.

Full text
Abstract:
Experiments were carried out to investigate natural convection heat transfer in an inclined uniformly heated circular cylinder . The effects of surface heat flux and angle of inclination on the temperature and local Nusselt number variations along the cylinder surface are discussed . The investigation covers heat flux range from 92 W/m² to 487 W/m², and angles of inclination 0° ( horizontal) , 30° , 60° and 90° (vertical) . Results show an increase in the natural convection as heat flux increases and as angle of inclination moves from vertical to horizontal position. An empirical equation of a
APA, Harvard, Vancouver, ISO, and other styles
4

Zhao, Wang, Qiang Wei, Chuanjin Huang, Yaoshun Zhu, and Ning Hu. "Dependence of Incidence Angle and Flux Density in the Damage Effect of Atomic Oxygen on Kapton Film." Polymers 14, no. 24 (2022): 5444. http://dx.doi.org/10.3390/polym14245444.

Full text
Abstract:
Kapton film is a polymeric material widely used on low-Earth-orbit (LEO) spacecraft surfaces. In the LEO environment, atomic oxygen (AO) is spaceflight materials’ most destructive environmental factor. The erosion mechanism of AO on Kapton films has long been an important issue, where the parameter dependence of the AO effect has received increasing attention. Studies of AO energy and cumulative flux have been extensively carried out, while the influence mechanism of the incidence angle and flux density is not fully understood. The AO incidence angle and flux density in space are diverse, whic
APA, Harvard, Vancouver, ISO, and other styles
5

Schunker, H., C. Baumgartner, A. C. Birch, R. H. Cameron, D. C. Braun, and L. Gizon. "Average motion of emerging solar active region polarities." Astronomy & Astrophysics 640 (August 2020): A116. http://dx.doi.org/10.1051/0004-6361/201937322.

Full text
Abstract:
Context. The tilt of solar active regions described by Joy’s law is essential for converting a toroidal field to a poloidal field in Babcock-Leighton dynamo models. In thin flux tube models the Coriolis force causes what we observe as Joy’s law, acting on east-west flows as they rise towards the surface. Aims. Our goal is to measure the evolution of the average tilt angle of hundreds of active regions as they emerge, so that we can constrain the origins of Joy’s law. Methods. We measured the tilt angle of the primary bipoles in 153 emerging active regions (EARs) in the Solar Dynamics Observato
APA, Harvard, Vancouver, ISO, and other styles
6

Shanmugam, Mathiyazhagan, and Lakshmi Sirisha Maganti. "Evaluation of Heat Flux Distribution Characteristics of a Concentrated Solar Dish Collector with different geometric indices." IOP Conference Series: Earth and Environmental Science 1100, no. 1 (2022): 012001. http://dx.doi.org/10.1088/1755-1315/1100/1/012001.

Full text
Abstract:
Abstract The concentrated solar dish collector is a promising technology for generating both electricity and thermal energy together and it is termed as concentrated photovoltaic thermal. The important component of the parabolic dish collector is the absorber; where all concentrated lights are falling. The present paper has investigated the heat flux distribution characteristics of the flat plate absorber based solar dish collector by using the ray-tracing simulations. In concentrating dish collector, rim angle and dish diameter are significant factor of the flux distributions. The present stu
APA, Harvard, Vancouver, ISO, and other styles
7

Yurukcu, Mesut, Fatma M. Yurtsever, Serkan Demirel, and Tansel Karabacak. "Conformality of PVD shell layers on GLAD-nanorods investigated by Monte Carlo simulations." MRS Advances 5, no. 43 (2020): 2241–48. http://dx.doi.org/10.1557/adv.2020.335.

Full text
Abstract:
AbstractThe quality of the shell coating around nanorods is critical in device applications. Conventional physical vapor deposition (PVD) techniques can be utilized for highly conformal shell coating formation in core-shell structure devices. To identify scalable fabrication techniques for conformal shell coatings, Monte Carlo (MC) simulations of PVD growth were performed under different atomic flux distributions and angles on arrays of glancing angle deposition (GLAD) nanorods, which were also generated by MC simulations. We investigated the conformality of PVD films (shell) around GLAD rod a
APA, Harvard, Vancouver, ISO, and other styles
8

Gelderblom, Hanneke, Oscar Bloemen, and Jacco H. Snoeijer. "Stokes flow near the contact line of an evaporating drop." Journal of Fluid Mechanics 709 (August 31, 2012): 69–84. http://dx.doi.org/10.1017/jfm.2012.321.

Full text
Abstract:
AbstractThe evaporation of sessile drops in quiescent air is usually governed by vapour diffusion. For contact angles below $9{0}^{\ensuremath{\circ} } $, the evaporative flux from the droplet tends to diverge in the vicinity of the contact line. Therefore, the description of the flow inside an evaporating drop has remained a challenge. Here, we focus on the asymptotic behaviour near the pinned contact line, by analytically solving the Stokes equations in a wedge geometry of arbitrary contact angle. The flow field is described by similarity solutions, with exponents that match the singular bou
APA, Harvard, Vancouver, ISO, and other styles
9

YASHIN, I. I., M. B. AMELCHAKOV, N. S. BARBASHINA, et al. "OBSERVATION OF UHECRs IN HORIZONTAL FLUX." International Journal of Modern Physics A 20, no. 29 (2005): 6937–40. http://dx.doi.org/10.1142/s0217751x05030521.

Full text
Abstract:
Preliminary results of muon bundle studies in of zenith angle range θ ≥ 60° and multiplicities by means of coordinate detector DECOR are discussed. Estimates of muon bundle characteristics at large zenith angles obtained with CORSIKA code demonstrate the ability of such not large detector as NEVOD-DECOR complex to perform cosmic ray studies in a very wide energy range from 1011 eV to more than 1017 eV.
APA, Harvard, Vancouver, ISO, and other styles
10

Besnard, Aurélien, Hamidreza Gerami, Marina Raschetti, and Nicolas Martin. "Resultant Incidence Angle: A Unique Criterion for Controlling the Inclined Columnar Nanostructure of Metallic Films." Nanomaterials 15, no. 8 (2025): 620. https://doi.org/10.3390/nano15080620.

Full text
Abstract:
The original Glancing Angle Deposition (GLAD) technique was developed using the evaporation process, i.e., in high vacuum, with a nearly punctual source, and with the substrate aligned with the source axis. In this specific case, the substrate tilt angle can be assumed to be equal to the impinging incidence angle of evaporated atoms. With the sputtering process, the deposition pressure is higher, sources are larger, and substrates are not intrinsically aligned with the source. As a result, deviations from the growth models applied for evaporation are reported, and the substrate tilt angle is n
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Angle flux"

1

Janeček, Valdislav. "Evaporation à l'échelle microscopique et à haut flux thermique." Paris 6, 2012. http://www.theses.fr/2012PA066512.

Full text
Abstract:
Cette thèse étudie théoriquement les processus de transport au voisinage de la ligne triple de contact liquide-gaz-solide et leur impact sur l'évaporation macroscopique. Dans la première partie de la thèse, l'hydrodynamique au voisinage de la ligne de contact est étudiée sous les conditions de mouillage partiel. L'évaporation induite par le chauffage du substrat dans l'atmosphère de vapeur du même fluide est considérée. La relaxation de la singularité hydrodynamique de la ligne triple est considérée. La principale conclusion de la thèse est que l'effet Kelvin (dépendance de la température de s
APA, Harvard, Vancouver, ISO, and other styles
2

Burchfield, Nicole Ashley. "Narrow Angle Radiometer for Oxy-Coal Combustion." BYU ScholarsArchive, 2020. https://scholarsarchive.byu.edu/etd/8423.

Full text
Abstract:
A new method of power production, called pressurized oxy-fuel combustion, burns coal with CO2 and oxygen, rather than air, bringing us closer to the end goal of developing zero emission coal-fired utility boilers. However, high-pressure, high-temperature systems such as these are under-studied, and their behavior is difficult to measure. An accurate model for previously untested conditions requires data for validation. The heat release profile of flames and their radiative intensity is one of the key data sets required for model validation of an oxy-coal combustion system. A radiometer can be
APA, Harvard, Vancouver, ISO, and other styles
3

Sugrue, Rosemary M. "The effects of orientation angle, subcooling, heat flux, mass flux, and pressure on bubble growth and detachment in subcooled flow boiling." Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/76974.

Full text
Abstract:
Thesis (S.M. and S.B.)--Massachusetts Institute of Technology, Dept. of Nuclear Science and Engineering, 2012.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 119-122).<br>The effects of orientation angle, subcooling, heat flux, mass flux, and pressure on bubble growth and detachment in subcooled flow boiling were studied using a high-speed video camera in conjunction with a two-phase flow loop that can accommodate a wide range of flow conditions. Specifically, orientation angles of 0' (downward-facing horizontal), 30°, 45°, 60°, and 90° (vertical); mass flu
APA, Harvard, Vancouver, ISO, and other styles
4

Laver, Mark. "A study of the flux line lattice in superconducting niobium by small angle neutron scattering." Thesis, University of Birmingham, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.487517.

Full text
Abstract:
The flux line lattice (FLL) of Type-II superconductors is a topic of much recent interest. On the one hand, the FLL orientation and shape provide insights into the properties of the underlying superconducting state. On the other hand, the quasi-2D flux line system itself provides a test-bed for theories of structural order in solids and glasses. We use small-angle neutron scattering (SANS) to study FLLs in elemental niobium, a conventional superconductor. Applying the magnetic field along the fourfold [001] direction of pure Nb crystals, we discover surprising new FLL shapes and orientations t
APA, Harvard, Vancouver, ISO, and other styles
5

Weinberger, Gottfried, and Yakob Yemane. "Experimental and numerical study of entrainment phenomena in an impinging jet." Thesis, Högskolan i Gävle, Akademin för teknik och miljö, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-8198.

Full text
Abstract:
This thesis is primarily about the mapping and analyze of the phenomenon of an impinging jet by experimental measurements and numerical simulations by CFD. The mapping shows the characteristics of velocity in and around the impinging jet with different conditions. Additional studies were made by analyzing the pressure along the vertical jet axis, but also weight measurements were part of the investigation. The measurements covered the range from 10 m/s, 20 m/s and 30 m/s, which corresponds to a Reynolds number of 17 000, 34 000 and 50 000. The impinging jet is therefore considered to be highly
APA, Harvard, Vancouver, ISO, and other styles
6

Kaya, Ebubekir. "Effects Of Off-center Angle On The Heat Transfer Coefficient On Vertical Tier Of Multiple Spherical Surfaces." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12605714/index.pdf.

Full text
Abstract:
EFFECTS OF OFF-CENTER ANGLE ON THE HEAT TRANSFER COEFFICIENT ON VERTiCAL TIER OF MULTIPLE SPHERICAL SURFACES Kaya, Ebubekir M.S., Department of Mechanical Engineering Supervisor: Assoc. Prof. Dr. Cemil Yamali December 2004, 112 pages The purpose of this study is to investigate the laminar film condensation phenomenon of steam on a vertical tier of multiple spherical surfaces by using both analytical and experimental methods. The analytical heat transfer results were obtained by following the Nusselt type of analysis and represented graphically. In addition, in order to observe the r
APA, Harvard, Vancouver, ISO, and other styles
7

Janecek, Vladislav. "Evaporation à l'échelle microscopique et à haut flux thermique." Phd thesis, Université Pierre et Marie Curie - Paris VI, 2012. http://tel.archives-ouvertes.fr/tel-00782517.

Full text
Abstract:
Cette thèse étudie théoriquement les processus de transport au voisinage de la ligne triple de contact liquide-gaz-solide et leur impact sur l'évaporation macroscopique. Dans la première partie de la thèse, l'hydrodynamique au voisinage de la ligne de contact est étudiée sous les conditions de mouillage partiel. L'évaporation induite par le chauffage du substrat dans l'atmosphère de vapeur du même fluide est considérée. La relaxation de la singularité hydrodynamique de la ligne triple est considérée. La principale conclusion de la thèse est que l'effet Kelvin (dépendance de la température de s
APA, Harvard, Vancouver, ISO, and other styles
8

Älfvåg, Hector. "Parametric Study of Separation in Outlet Diffuser of Rocket Nozzle Cooling Channel Rig : The Effect of Heat Flux and Angle of Outlet Diffuser for Rectangular-to-Circular Cross Section Transitions." Thesis, KTH, Farkostteknik och Solidmekanik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-299946.

Full text
Abstract:
The use of natural gas with high methane content as rocket fuel has gained substantial industrial attention over the past number of years. Several actors including SpaceX and Blue Origin are developing natural gas powered rocket engines. Attention is also shown from GKN Aerospace, a Sweden-based aerospace engine development company, who together with KTH Royal Institute of Technology has initiated the MERiT project. The project is intended to investigate different aspects of methane powered engines. The project is centered around a physical test rig of a rocket nozzle cooling channel along wit
APA, Harvard, Vancouver, ISO, and other styles
9

Ghanbarpourgeravi, Morteza. "Investigation of Thermal Performance of Cylindrical Heatpipes Operated with Nanofluids." Doctoral thesis, KTH, Skolan för industriell teknik och management (ITM), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-202566.

Full text
Abstract:
Nanofluids as an innovative class of heat transfer fluids created by dispersing nanometre-sizedmetallic or non-metallic particles in conventional heat transfer fluids displayed the potential toimprove the thermophysical properties of the heat transfer fluids. The main purpose of this study is toinvestigate the influence of the use of nanofluids on two-phase heat transfer, particularly on thethermal performance of the heat pipes. In the first stage, the properties of the nanofluids were studied,then, these nanofluids were used as the working fluids of the heat pipes. The thermal performance oft
APA, Harvard, Vancouver, ISO, and other styles
10

Pavelka, Adam. "Numerické modelování zdrojů světla." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219144.

Full text
Abstract:
The master’s thesis deals with photometry units used in light engineering. There are defined the methods of modelling the illumination systems, their advantages, disadvantages and possibilities of using. Furthermore, the thesis deals with modelling of two illumination systems by ray-tracing in programming environment of MATLAB. The master’s thesis describes the analysis of the problem and the program designing process. Acquired model results are then compared with the real measurements of both illumination systems which allow the discussion of the results and the deviations of the models.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Angle flux"

1

H, Sharaf El-Din Hazem, Liu C. H. 1941-, and United States. National Aeronautics and Space Administration., eds. Three dimensional solution of pneumatic active control of forebody vortex asymmetry. American Institute of Aeronautics and Astronautics, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sharrad, Paul. South Pacific. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780199679775.003.0011.

Full text
Abstract:
This chapter focuses on the history of the South Pacific novel as a post-1950s phenomenon. Many Pacific writings from the early phase of literary production came in the form of ‘auto-ethnographic’ accounts of village life or the transcription of oral stories in which the separation of the writer is indicated often implicitly in the external viewpoint of the narrative and its use of formal English to depict a clearly non-Anglo world. To become a writer, one had to enter school, where he/she had to be acquainted not only with maths tables and alphabets but also new patterns of behaviour fitted t
APA, Harvard, Vancouver, ISO, and other styles
3

Enyeart, John P. Death to Fascism. University of Illinois Press, 2019. http://dx.doi.org/10.5622/illinois/9780252042508.001.0001.

Full text
Abstract:
Death to Fascism focuses on how social justice immigrant activist Louis Adamic went from being a Slovenian peasant to leading a coalition that included black intellectuals and journalists, working-class militants, ethnic community activists, novelists, and radicals who made antifascism the dominant US political culture from the mid-1930s through 1948. By championing racial and ethnic equality, workers’ rights, and anticolonialism, Adamic and his fellow antifascists helped to transform the US understanding of democracy. From the 1920s through his death in 1951, Adamic became a celebrity because
APA, Harvard, Vancouver, ISO, and other styles
4

Mason, Emma. Christina Rossetti. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198723691.001.0001.

Full text
Abstract:
Christina Rossetti: Poetry, Ecology, Faith suggests that the life and works of Christina Rossetti offer a commentary on the relationship between Christianity and ecology. It counters readings of her as a withdrawn or apolitical poet by reading her Anglo-Catholic faith in the context of her commitment to the nonhuman. Rossetti considered the doctrines and ideas associated with the Catholic Revival to be revelatory of an ecology of creation in which all things, material and immaterial, human and nonhuman, divine and embodied, are interconnected. The book focuses on her close attention to the Bib
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Angle flux"

1

Melnichenko, Yuri B. "Constant Flux and Time-of-Flight Instrumentation." In Small-Angle Scattering from Confined and Interfacial Fluids. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-01104-2_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Deng, Xiujie. "Introduction." In Springer Theses. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-5800-9_1.

Full text
Abstract:
AbstractParticle accelerators as photon sources are advanced tools in investigating the structure and dynamical properties of matter, and have enabled advances in science and technology for more than half a century. The present workhorses of these sources are storage ring-based synchrotron radiation facilities [1–3] and linear accelerator-based free-electron lasers (FELs) [4–7]. These two kinds of sources deliver light with high repetition rate and high peak brilliance and power, respectively. Some applications, however, do need high average power and high photon flux. Kilowatt extreme ultravi
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Baoqing, Yunyi Guo, Xingzhou Fan, and Shuang Chen. "Performance of a Mechanical Pump-Driven Two-Phase Cooling System for Aircraft Systems." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-8401-1_19.

Full text
Abstract:
AbstractIn order to solve the heat dissipation problem of high heat flux components of military electronic equipment, a mechanical pump-driven two-phase flow cooling system was designed in this paper. The thermal performance of the system was tested experimentally at room temperature, high and low temperature and vibration environment. By means of the experimental data and phenomenon analysis, the system had good heat transfer performance under room temperature, high and low temperature, vibration conditions. Under the condition of acceleration environment, the system liquid storage separator
APA, Harvard, Vancouver, ISO, and other styles
4

Deng, Xiujie. "SSMB Radiation." In Springer Theses. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-5800-9_4.

Full text
Abstract:
AbstractHaving discussed the methods to form and preserve microbunching in the last two chapters, now we present the theoretical and numerical study of the average and statistical property of coherent radiation from SSMB. Our results show that a kW-level average power quasi-continuous-wave EUV radiation can be obtained from an SSMB ring, provided that an average current of 1 A and bunch length of 3 nm microbunch train can be formed at the radiator which is assumed to be an undulator. Together with its narrowband feature, the EUV photon flux can reach $$10^{15}\sim 10^{16}$$ 10 15 ∼ 10 16 phs/s
APA, Harvard, Vancouver, ISO, and other styles
5

Park, Byoung Jae, Kyoung Seok Min, Sang Duk Park, Jeong Woon Bae, Oleksiy Vozniy, and Geun Young Yeom. "Formation of High Flux Parallel Neutral Beam Using a Three Grid System of Ion Beam during Low Angle Forward Reflection of Ions." In Solid State Phenomena. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/3-908451-31-0.275.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Elmuradov, Aziz. "Making Sense of Central Asia Sources of Epistemic Uncertainty." In SpringerBriefs in Political Science. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-39024-1_2.

Full text
Abstract:
AbstractCentral Asia is in flux, and so are the perspectives and angles of intellectual inquiry, as are the modes of and approaches to the scientific investigation of the region. This paper sets out to discuss the role of academic positionality essential to this flux—caught between modernity and tradition—and reflects on one of its striking effects, epistemic ambiguity. In light of knowledge-related turns in the social sciences, notably, the epistemological twists and turns entailed in postmodernist, postcolonial, decolonial, and feminist critique, the study of academic positionality and its i
APA, Harvard, Vancouver, ISO, and other styles
7

Manchola, Miguel, Daya Serrano, Daniel Gómez, et al. "T-FLEX: Variable Stiffness Ankle-Foot Orthosis for Gait Assistance." In Biosystems & Biorobotics. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-01887-0_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pino, Angie, Daniel Gomez-Vargas, Marcela Múnera, and Carlos A. Cifuentes. "Visual Feedback Strategy Based on Serious Games for Therapy with T-FLEX Ankle Exoskeleton." In Biosystems & Biorobotics. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-69547-7_75.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dalong, Zhang, Li Zhouhang, Zhang Hai, et al. "Numerical Simulation of Combustion Characteristics and Heat Flux Distribution in a 600-MW Arch-Fired Boiler with Different Primary Air Injection Angles." In Clean Coal Technology and Sustainable Development. Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-2023-0_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Reece, A. B. J., and T. W. Preston. "Performance prediction for switched reluctance motors (two-and three-dimensional)." In Finite Element Methods in Electrical Power Engineering. Oxford University PressOxford, 2000. http://dx.doi.org/10.1093/oso/9780198565048.003.0018.

Full text
Abstract:
Abstract A common procedure is to neglect coupling between phases and to predict flux linkages with an excited phase as a function of angle and current. Circuit equations, which include a model of the converter, are then used to calculate the phase current and flux linkages as a function of time, assuming speed to be constant. The torque produced can be derived from rate of change of coenergy as described by Stephenson and Corda (1979).
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Angle flux"

1

Arakawa, Souya, Shigeo Morimoto, Yukinori Inoue, and Masayuki Sanada. "Online MTPA Angle Search Method Using Flux Linkage Plane Estimation of SynRM." In 2024 27th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2024. https://doi.org/10.23919/icems60997.2024.10921043.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Khan, Salek A., Parisa Afsari, and Matthew C. Gardner. "Comparison between Flux Angle Mapping and Cycloidal Magnetic Gears for High Gear Ratio Applications." In 2024 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2024. https://doi.org/10.1109/ecce55643.2024.10861428.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Huang, Dachao, Ziyin Wang, Qi Long, et al. "Research on Transformer Inrush Current Suppression and Optimal Closing Angle Considering Switching Resistance and Residual Flux." In 2025 IEEE International Conference on Power Systems and Smart Grid Technologies (PSSGT). IEEE, 2025. https://doi.org/10.1109/pssgt64932.2025.11034225.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kajino, Keita, and Hiroya Sugimoto. "Reduction of Force Error Angle by Flux-Strengthening Control in Two-axis Actively Positioned Bearingless PM Motor." In 2024 27th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2024. https://doi.org/10.23919/icems60997.2024.10921411.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Khan, Salek A., Parisa Afsari, and Matthew C. Gardner. "Analysis of Bridge Placement and Ferromagnetic Piece Curvature on Performance of Coaxial and Flux Angle Mapping Magnetic Gears." In 2025 IEEE International Electric Machines & Drives Conference (IEMDC). IEEE, 2025. https://doi.org/10.1109/iemdc60492.2025.11060990.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mohebbi, Mohammadreza, Davood Arab Khaburi, Saeed Heshmatian, Jose Rodriguez, and Cristian Garcia Penailillo. "Predictive Control of Flux Angle for Induction Motors." In 2019 IEEE International Symposium on Predictive Control of Electrical Drives and Power Electronics (PRECEDE). IEEE, 2019. http://dx.doi.org/10.1109/precede.2019.8753320.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Khan, Salek A., Matthew C. Gardner, and Godwin Duan. "Flux Angle Mapping Coaxial Magnetic Gears for High Gear Ratios." In 2022 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2022. http://dx.doi.org/10.1109/ecce50734.2022.9947703.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sen, Basav, Donald L. Schmidt, and David G. Bogard. "Film Cooling With Compound Angle Holes: Heat Transfer." In ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/94-gt-311.

Full text
Abstract:
Heat transfer coefficients have been measured for film cooling injection from a single row of holes laterally directed with a compound angle of 60°. Two hole configurations were tested, round holes and holes with a diffusing expansion at the exit. Streamwise directed round holes were also tested as a basis for comparison. All the holes were inclined at 35° with respect to the surface. The density ratio was 1.0, momentum flux ratios ranged from I = 0.16 to 3.9 and mass flux ratios from M = 0.4 to 2.0. Results are presented in terms of hf/h0, the ratio of film cooling heat transfer coefficient t
APA, Harvard, Vancouver, ISO, and other styles
9

Schmidt, Donald L., Basav Sen, and David G. Bogard. "Film Cooling With Compound Angle Holes: Adiabatic Effectiveness." In ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/94-gt-312.

Full text
Abstract:
Film cooling effectiveness was studied experimentally in a flat plate test facility with zero pressure gradient using a single row of inclined holes which injected high density, cryogenically cooled air. Round holes and holes with a diffusing expanded exit were directed laterally away from the freestream direction with a compound angle of 60°. Comparisons were made with a baseline case of round holes aligned with the freestream. The effects of doubling the hole spacing to six hole diameters for each geometry were also examined. Experiments were performed at a density ratio of 1.6 with a range
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Guanxiong, Jinglin Liu, and Shuaifu Wang. "Investigation on Leading Angle Flux Weakening Control of Brushless DC Motor." In 2010 International Conference on Measuring Technology and Mechatronics Automation (ICMTMA 2010). IEEE, 2010. http://dx.doi.org/10.1109/icmtma.2010.146.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Angle flux"

1

Nestleroth. L51811 Circumferential Magnetic Flux for In-Line Detection of SCC and Selective Seam Weld Corrosion. Pipeline Research Council International, Inc. (PRCI), 1999. http://dx.doi.org/10.55274/r0010666.

Full text
Abstract:
Longitudinal defects, including stress-corrosion cracking (SCC) and selective seam weld corrosion, can occur in natural gas transmission pipelines. Previously developed nondestructive testing techniques (including angle beam ultrasonics, electromagnetic acoustic transducers (EMATs), and remote field eddy current) are capable of detecting longitudinal defects. Two angle beam ultrasonic syatems are commercially available, and an EMAT system is being commercialized. But there are factors that limit the applicability of these techniques, such as minimum pipe diameter and maximum inspection speed.
APA, Harvard, Vancouver, ISO, and other styles
2

Raj, Phani K. DTRS56-04-T-0005A Radiant Heat Attenuation by Clothing and Human Tolerance to Radiant Heat. Pipeline Research Council International, Inc. (PRCI), 2007. http://dx.doi.org/10.55274/r0011869.

Full text
Abstract:
A series of tests involving the exposing mannequins clothed with normal civilian clothing to a 10 ft. x 10 ft. LNG pool fire was conducted. Both single layer clothing and double layer clothing were used. The radiant heat flux incident outside the clothing and incident on the skin covered by clothing were measured using wide-angle radiometers, for durations of 100 s to 200 s (per test). The levels of heat flux incident on the clothing were close to 5 kW/m2. The magnitude of the attenuation factor (AF) (ratio of the outside radiant heat flux to that on the skin) was calculated. It is seen that A
APA, Harvard, Vancouver, ISO, and other styles
3

Sokolov, Mikhail A., Ken Littrell, Peter Wells, and Nicholas J. Cunningham. Report detailing comparative analysis of results from high flux isotope reactor and national institute of standards technology small-angle neutron scattering experiments. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1364278.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wilson, D., Chris Pettit, Vladimir Ostashev, and Matthew Kamrath. Signal power distributions for simulated outdoor sound propagation in varying refractive conditions. Engineer Research and Development Center (U.S.), 2024. http://dx.doi.org/10.21079/11681/48774.

Full text
Abstract:
Probability distributions of acoustic signals propagating through the near-ground atmosphere are simulated by the parabolic equation method. The simulations involve propagation at four angles relative to the mean wind, with frequencies of 100, 200, 400, and 800 Hz. The environmental representation includes realistic atmospheric refractive profiles, turbulence, and ground interactions; cases are considered with and without parametric uncertainties in the wind velocity and surface heat flux. The simulated signals are found to span a broad range of scintillation indices, from near zero to exceedi
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Angle flux' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography