Relevant bibliographies by topics / Ansys Gambit

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Conference papers

Academic literature on the topic 'Ansys Gambit'

Author: Grafiati
Published: 4 June 2021
Last updated: 10 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Ansys Gambit.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Ansys Gambit"

1

Shaaban, Ayman A., Samy M. Morcos, Essam Eldin Khalil, and Mahmoud A. Fouad. "Effect of Bench Hood Exhaust Usage on Indoor Air Quality in a Chemical Laboratory." Evolving Trends in Engineering and Technology 1 (August 2014): 14–22. http://dx.doi.org/10.18052/www.scipress.com/etet.1.14.

Full text
Abstract:
Indoor air quality inside chemical laboratories subjected to gaseous contaminants was investigated numerically throughout the current research using Ansys Fluent 13. The lab is 4.8 m (L) * 4.3 m (W) * 2.73 m (H). The model was built and mesh was generated using Gambit 2.2.30 yielding around 1.4 million cells. To ensure the reliability of the Computational Fluid Dynamics (CFD) model validation was done against experimental data of three cases done by Jin et al. [1]. The model could simulate accurately contaminant mole fraction to the order of 10 Indoor air quality inside chemical laboratories s
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Yan, Yong Teng Jing, and Longnv Li. "Calculation and Analysis of Winding Temperature Rise for ODAF Power Transformer." Advanced Materials Research 516-517 (May 2012): 1580–83. http://dx.doi.org/10.4028/www.scientific.net/amr.516-517.1580.

Full text
Abstract:
The AutoCAD, Gambit and ANSYS software are used to establish transformer oil flow-temperature rise model and mesh generation based on finite volume method, fluid mechanics and numerical heat transfer. A method that calculates temperature rise distribution of transformer winding regional wire and oil by FLUENT software, and a numerical example is given for an actual transformer.
APA, Harvard, Vancouver, ISO, and other styles
3

Bao, Guang Ming, Juan Chang, and Zhi Gang Liu. "Analysis of the Open-Pit to Underground Mining Slope Stability." Applied Mechanics and Materials 484-485 (January 2014): 599–603. http://dx.doi.org/10.4028/www.scientific.net/amm.484-485.599.

Full text
Abstract:
This paper uses the simulation technology of computer numerical simulation, combined with the GAMBIT numerical modeling software and ANSYS structure analysis software, we carry out an in-depth research and analysis on the stability of engineering simulation, at the same times establish the mathematical model of ANSYS numerical simulation displacement stability and design the ANSYS command stream program algorithm. Finally, this paper uses the open-pit to underground mining slope stability as an example, to verify the reliability of the model and algorithm. Through the numerical simulation, we
APA, Harvard, Vancouver, ISO, and other styles
4

Sherbaz, Salma, and Wen Yang Duan. "Calculation of Effect of Viscous and Pressure Forces on Trimming Moments." Applied Mechanics and Materials 590 (June 2014): 42–47. http://dx.doi.org/10.4028/www.scientific.net/amm.590.42.

Full text
Abstract:
In this study the effects of viscous and pressure forces on trimming moments of Series 60 (CB = 0.6) hull form are calculated at different Froude numbers by employing computational methods. The grid generator GAMBIT was used for meshing hull and computational domain. The Simulations are carried out using commercial CFD code ANSYS Fluent 13. The SIMPLE (Semi-Implicit Methods for Pressure-Linked Equations) algorithm is used for pressure-velocity coupling. The volume of Fluid (VOF) formulation is employed. The computed resistance, wave profile and trim of series 60 hull are compared with experime
APA, Harvard, Vancouver, ISO, and other styles
5

Staša, Pavel, Vladimír Kohut, Oldřich Kodym, and Zora Jančíková. "Methane Diffusion in a Porous Environment." Defect and Diffusion Forum 353 (May 2014): 50–55. http://dx.doi.org/10.4028/www.scientific.net/ddf.353.50.

Full text
Abstract:
The paper deals with modeling and simulation of methane flow through the porous environment using the CFD (Computational Fluid Dynamics) software Fluent. We compare three situations, which can occur in areas, where mining activities were closed few years ago, in this article. First case is modeling of methane flow through the rocks. Second event is situation where the thin water layer is situated at the surface. The last one is occurrence of groundwater. The article responds to the need for knowledge of natural processes in the given area and it follows our previous papers [1], [2]. Software G
APA, Harvard, Vancouver, ISO, and other styles
6

Vu, Anh Ngoc, and Tung Nguyen Minh Huynh. "An automated analysis process for vertical axis wind turbine." Science and Technology Development Journal 18, no. 4 (2015): 145–52. http://dx.doi.org/10.32508/stdj.v18i4.1000.

Full text
Abstract:
This paper presents an automated process for analyzing the performance of vertical axis wind turbine (VAWT). The details of this process will be demonstrated, which include the airfoil geometry representation using CST method, a hybrid meshing process combining structured grids and unstructured grids, CFD calculation process and processing data results to calculate the power coefficient of VAWT. These processes are designed as separate modules. CFD methods used in this research is RANS 2D using Realizable k  turbulence model. Meshing process will be done on the GAMBIT software, the CFD calcu
APA, Harvard, Vancouver, ISO, and other styles
7

Mokhetar, Abdulhafiz Younis, Eflita Yohana, and MSK Tony Suryo Utomo. "THE AERODYNAMICS ANALYSIS OF AIRFOILS FOR HORIZONTAL AXIS WIND TURBINE BLADE USING COMPUTATIONAL FLUID DYNAMIC." ROTASI 16, no. 3 (2014): 23. http://dx.doi.org/10.14710/rotasi.16.3.23-30.

Full text
Abstract:
This paper included in designing and simulating for 2D. It may use two software's called Gambit and FLUENT to generate the data from the fluid flow cases. In this research select two models NACA airfoil NACA4412 and NACA4415. Chose NACA 4412 because lift coefficient is higher than NACA4415. In this study computational flow over an airfoil at different angles of attack (0º, 5º,10º,15º ,20º) using CFD (Computational fluid dynamics) simulation two dimensional airfoil NACA 4412 and NACA4415 CFD models are presented using ANSYS-FLUENT software. For this model Using turbulent viscosity k-epsilon (st
APA, Harvard, Vancouver, ISO, and other styles
8

Afzal, Muhammad Javaid, Muhammad Waseem Ashraf, Shahzadi Tayyaba, Akhtar Hussain Jalbani, and Farah Javaid. "Computer Simulation Based Optimization of Aspect Ratio for Micro and Nanochannels." Mehran University Research Journal of Engineering and Technology 39, no. 4 (2020): 779–91. http://dx.doi.org/10.22581/muet1982.2004.10.

Full text
Abstract:
For Computational Fluidic Dynamics (CFD) analysis, different types of software are available such as ANSYS, COMSOL, GAMBIT and ABAQUS. ANSYS FLUENT is a very influential CFD software that enables the researchers to execute advanced and fast simulation as the performance of product is optimized. In this research work, the capabilities of ANSYS FLUENT have been investigated through the fluidic simulation of nano scale channels. Here, the simulation of three straight shaped and one curvilinear nano channel has been performed to analyze the precision of simulation with the aspect ratio of smaller
APA, Harvard, Vancouver, ISO, and other styles
9

Cwudziński, A., J. Jowsa, and P. Przegrałek. "Interaction of Liquid Steel with Mould Flux in Continuous Casting Bloom Mould - Numerical Simulations and Industrial Experiences." Archives of Metallurgy and Materials 61, no. 4 (2016): 2013–20. http://dx.doi.org/10.1515/amm-2016-0325.

Full text
Abstract:
Abstract The device under examination is a mould of a capacity of 0.5 Mg and with inner cross-section of 280×400 mm. The virtual model of the facility under investigation was made using Gambit, DesignModeler and Meshing programs. Computer simulation of the liquid steel flow and mould flux behaviour in turbulent motion conditions was done using the Ansys-Fluent® computer program. On the basis of earlier researches the volume of fluid (VOF) model was applied. Based on computer simulations carried out, steel flow and flux behaviour fields and curves of flux mould entrainment concentration were ob
APA, Harvard, Vancouver, ISO, and other styles
10

Pandey, Krishna Murari, Ritabrata Thakur, Abhinav Hazarika, Tarun Ashutosh, and Dipankar Gogoi. "Non-Newtonian Computational Fluid Dynamics (CFD) Modeling on Left Coronary Artery with Multiple Blockages." Applied Mechanics and Materials 592-594 (July 2014): 1924–29. http://dx.doi.org/10.4028/www.scientific.net/amm.592-594.1924.

Full text
Abstract:
The rate of mean blood flow through arteries depend on the resistance to flow presented by the blood vessels. Mean blood pressure decreases as the circulating blood moves away from the heart through arteries and capillaries due to viscous losses of energy. Atherosclerosis is a common phenomenon that is observed causing blockage in coronary arteries leading to cardiac arrest. This blockage is due to the deposition of cholesterol or plaque on the inner walls of the coronary artery. This paper provides an analytical study on the variation of static pressure with multiple blockages in the artery i
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Ansys Gambit"

1

Hamberg, Micaela, and Signe Dahlin. "Numerical Study on Hydrodynamic Characteristics of Flood Discharge Tunnel in Zipingpu Water Conservancy Project : Using RANS equations and the VOF model." Thesis, Uppsala universitet, Elektricitetslära, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-387206.

Full text
Abstract:
To avoid the large amount of damage that floods can cause, spillway tunnels are used to control water levels. To ensure the safety of water transportation through spillway tunnels, the behaviour of the water throughout the tunnel is important to know. Physical experiments are time consuming and expensive, hence CFD simulations are a profitable option for investigating the performance of the spillway tunnel. In this project, simulations of water flow in a spillway tunnel were executed. A three dimensional model of the spillway tunnel in Zipingpu Water Conservancy Project was created in the soft
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Ansys Gambit"

1

Simeunovic, Goran, Ivana Oswaldova, Tomas Vyhlidal, and Pavel Zítek. "Numerical Modeling of the Moisture Transfer Through Wooden Desk by Linking Ansys and Matlab Software." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-66347.

Full text
Abstract:
In the presented research, numerical modeling tools are applied to study relation between the moisture distribution and related stress and strain in a painted wooden desk. The research is motivated by a Case study analysis of the impact of indoor air relative humidity (RH) changes to the collection of mediaeval wooden panel paintings located in the Chapel of the Holy Cross at Karlstejn Castle. This problem is being investigated as one of the tasks of the European project Climate for Culture (http://www.climateforculture.eu/). In the analysis, CFD model of airflow movement and RH distribution i
APA, Harvard, Vancouver, ISO, and other styles
2

Krishnani, Pramod Nari, and Dongmei Zhou. "CFD Analysis of Drag Reduction for a Generic SUV." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-10170.

Full text
Abstract:
The flow in the near wake of the blunt bodies of road vehicles like SUVs plays an important role in determining the pressure forces acting on the surface of the body. To better understand the wake profiles and stagnation pressure gradient of the vehicle, this paper performed numerical analysis on CAD model of a Generic SUV which was previously tested in the wind tunnel. Commercial software package of ANSYS® GAMBIT, T-grid and FLUENT® was used for multi cell meshing and solving of the governing equations. The pressure coefficient ‘Cp’ plots at the symmetry plane of the model were compared with
APA, Harvard, Vancouver, ISO, and other styles
3

Mahdi, Qasim Saleh, Sahar A. Fattah, and Firas Jumia. "Numerical Investigation to Evaluate the Performance of Helical Coiled Tube Heat Exchanger With and Without Nanofluid." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-62350.

Full text
Abstract:
A numerical analysis presented out to simulate internal forced convection and temperature distribution in helical coil tube with and without nanofluid. An ANSYS FLUENT package 14.1 commercial copy with SOLID WORK and GAMBIT software program is employed. The flow pattern and temperature distribution in helical coil tube heat exchanger is studied with and without nanofluid. Numerical work included two parts: the first is included helical coil heat exchanger with optimum curvature ratio (17). An optimum helical coil pitch has been used to study the temperature distribution and flow pattern differ
APA, Harvard, Vancouver, ISO, and other styles
4

Malik, Abdul Wahab, Naseem Uddin, Syed M. Hameed Ul Haq, M. Faizyab Uddin Khan, and Sikandar Hayat. "Modeling and Simulation of a Three-Dimensional Adjustable Horizontal Axis Wind Turbine Blade, Using a Commercial Computational Fluid Dynamics (CFD) Code." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-70096.

Full text
Abstract:
Wind turbines are subjected to variable wind speeds and flow patterns, this can result in variable power output from the wind turbine. A common practice to counter this problem is to create a twisted wind turbine blade, which can produce optimum output when subjected to different velocities and angle of attack. The research paper discusses the performance characteristics of the same. The research paper presents CFD modeling of a twisted blade. The strategy used for the modeling was to divide the research in two parts. In the first part CFD simulations for 2-D Airfoils were carried-out and the
APA, Harvard, Vancouver, ISO, and other styles
5

Muilenburg, Marta, Yunye Shi, and Albert Ratner. "Computational Modeling of the Combustion and Gasification Zones in a Downdraft Gasifier." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64009.

Full text
Abstract:
Computational modeling was completed on a simplified downdraft gasifier being installed at the University of Iowa Oakdale Power Plant. The model was created in Gambit and simulated in ANSYS Fluent. The process modeled was non-premixed combustion on biomass fuel with a fixed-bed. The Fluent coal model was modified based on (off-site) proximate and ultimate analyses of the biomass. Varying packing densities, oxidizer inlet velocities and fuel types were simulated and the impact on the combustion zone was assessed. It was found that packing densities around 0.5 with oxidizer inlet velocities less
APA, Harvard, Vancouver, ISO, and other styles
6

Romsy, Tomas, and Pavel Zacha. "Coolant Mixing in the VVER-440 Fuel Assembly Head." In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-30823.

Full text
Abstract:
The issue of the temperature measurement in a nuclear reactor is an important element to ensure safe operation of the nuclear power plant. To prevent damages and radioactive releases the fuel in the reactor must be continuously cooled. The coolant temperature field of the VVER-440 reactor is measured with thermocouples installed at the outlet part of fuel assemblies. Since the power output of the fuel pins is not equal, a non-uniform temperature field at the inlet of the fuel assembly head is formed. Next, the temperature field is subsequently mixed by passing through the assembly head, which
APA, Harvard, Vancouver, ISO, and other styles
7

Turgut, O¨zhan H., and Cengiz Camcı. "A Computational Validation of Turbine Nozzle Guide Vane Aerodynamic Experiments in an HP Turbine Stage." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64352.

Full text
Abstract:
A computational validation study related to aerodynamic loss generation mechanisms is performed in an axial flow turbine nozzle guide vane (NGV). The 91.66 cm diameter axial flow turbine research facility has a stationary nozzle guide vane assembly and a 29 bladed HP turbine rotor. The NGV inlet and exit Reynolds numbers based on midspan axial chord are around 300000 and 900000, respectively. The effect of grid structure on aerodynamic loss generation is investigated. GAMBIT and TGRID combination is used for unstructured grid, whereas GRIDPRO is the structured grid generator. For both cases, y
APA, Harvard, Vancouver, ISO, and other styles
8

Artemev, Alexandr, and Valentin Biryukov. "REDUCTION OF THE VOLUME OF PUMPING OF LIQUID WASTE FROM THE PRODUCTION OF APATITE CONCENTRATE DUE TO THE TECHNOLOGY OF PARTIALLY CLOSED WATER CIRCULATION." In GEOLINKS Conference Proceedings. Saima Consult Ltd, 2021. http://dx.doi.org/10.32008/geolinks2021/b1/v3/51.

Full text
Abstract:
"The use of recycled water supply technology in mineral dressing plants solves current environmental and economic problems for the mining and processing industry. Usually, water treatment takes a long time and requires constructing large-volume tailing dumps. The paper proposes a technology of a partially closed water circulation with the purification of watered production waste from suspended particles and water-soluble impurities that negatively affect the flotation process, based on the regularities describing the interaction of flocculants with the phases of a heterogeneous system of proce
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Ansys Gambit' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography