Log in

Relevant bibliographies by topics / ANSYS software system / Journal articles

To see the other types of publications on this topic, follow the link: ANSYS software system.

Journal articles on the topic 'ANSYS software system'

Author: Grafiati

Published: 28 May 2022

Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'ANSYS software system.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Li, Yu Guang, and Guo Qing Zhang. "The Dynamic Simulation Study of WN Gear Pair after Coupling Tribology." Applied Mechanics and Materials 577 (July 2014): 214–17. http://dx.doi.org/10.4028/www.scientific.net/amm.577.214.

Full text

Abstract:

Based on WN gear characteristics and considering system error, a multi-degree-freedom (Tangential-Radial-Axial) dynamics analysis model after coupling friction was established. In this article, we established the three-dimensional solid model by using PROE and then imported WN gear’ three-dimensional model into Ansys software through the data interface of Ansys software and PROE software and conducted a three-dimensional simulation anasys of the impact of dynamic contact. By applying load, the stress analysis of WN gear was conducted and the WN gear’s the effective stress clouds was gotten. Me

APA, Harvard, Vancouver, ISO, and other styles

2

K, Sandhya. "Structural Analysis of an Off-Road Vehicle Suspension System Using CATIA and ANSYS." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 05 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem33001.

Full text

Abstract:

This project delves into the structural analysis of an off-road vehicle suspension system, employing cutting-edge software tools such as CATIA and ANSYS. Off-road vehicles necessitate robust suspension systems capable of withstanding harsh terrain conditions while ensuring vehicle stability, manoeuvrability, and passenger comfort. The study focuses on evaluating the structural integrity, performance, and behaviour of the suspension system under diverse load conditions and terrain scenarios. This project focuses on conducting a comprehensive structural analysis of an off-road vehicle suspension

APA, Harvard, Vancouver, ISO, and other styles

3

Chang, Juan, Jian Hua Zhang, Dian Ji Zhang, and Zhi Gang Liu. "Research on Computer Information System of Disaster Warning Based on ANSYS and MATLAB." Applied Mechanics and Materials 484-485 (January 2014): 958–62. http://dx.doi.org/10.4028/www.scientific.net/amm.484-485.958.

Full text

Abstract:

In this paper, we use the software of ANSYS and MATLAB to do research on early computer warning system. ANSYS can check the intensity of early warning system, and MATLAB can realize the visual function of warning system. In this paper we established the process model of ANSYS intensity checking, and designed the calculation process of order flow. We use the disaster warning when opencast mining to underground mining as an example to verify the model and the algorithm. Through the calculation we get the correlation table between calculated and measured value. Finally we get the biggest stress n

APA, Harvard, Vancouver, ISO, and other styles

4

Yuan, Qing Ke, Ya Nan Du, Yao Ding, and Tong Le Wang. "Modal Analysis of Ball Screw Based on ANSYS Software." Advanced Materials Research 314-316 (August 2011): 1981–86. http://dx.doi.org/10.4028/www.scientific.net/amr.314-316.1981.

Full text

Abstract:

Ball screw is an important part in the machine tool feeding system. This paper researches on the ball screw, establishes the 3D virtual numerical model by Pro/engineer. Modal analysis of ball screw is carried out in three different cases by ANSYS, then gets the intrinsic frequency and vibration model of ball screw. It provides reliable reference for further structure analysis of ball screw.

APA, Harvard, Vancouver, ISO, and other styles

5

Shaik Chand Mabhu Subhani and N.Vijay Kumar. "Static and Model Analysis on Pneumatic Suspension by using Ansys Software." International Journal for Modern Trends in Science and Technology 6, no. 12 (2020): 384–89. http://dx.doi.org/10.46501/ijmtst061272.

Full text

Abstract:

During the tractor movement, with being attached to the hitch-system working equipment over Rough road surfaces oscillation of the machine take place. These oscillations are a reason of pressure pulsations in the hydraulic hitch-system. The pressure pulse reduction in the tractor Hitch-system is important for increasing of the system components lifetime. Pressure oscillation damping in the tractor hydraulic hitch-system can reduce overall system oscillations and improve the driving control. The design of spring in suspension system is very important. In this project a shock absorber is designe

APA, Harvard, Vancouver, ISO, and other styles

6

Ren, Bai Cheng. "Surrounding Rock Rupture Modeling of Tunnel Based on ANSYS." Applied Mechanics and Materials 490-491 (January 2014): 863–66. http://dx.doi.org/10.4028/www.scientific.net/amm.490-491.863.

Full text

Abstract:

This article is based on the real condition of a tunnel. By using displacement and stress contours get from finite element analysis software ANSYS, the simulation of the tunnel excavation is modeled and the regulation of overlying rock’s displacement and stress is deducted during the evacuation of the tunnel. The analysis result to overlying rock mass’ rupture regularity can be helpful for the control of surrounding rock’s stability and the improvement of supporting system. The result shows finite element analysis software ANASYS can be used to guide tunnel constructions during the evacuation.

APA, Harvard, Vancouver, ISO, and other styles

7

Králik, Juraj, and Juraj JR Králik. "Methodology of Teaching Methods of FEM Analysis Using Software ANSYS." International Journal of Education and Information Technologies 16 (January 4, 2022): 12–28. http://dx.doi.org/10.46300/9109.2022.16.2.

Full text

Abstract:

This paper presents the authors' experience of teaching the finite element method (FEM) at university. With the development of computational tools in the second half of the twentieth century, there was also the development of computational methods focused on the algorithmization of engineering tasks based on FEM. From the solution of individual problems of the state of stress and deformation from the influence of the external environment, a complex solution of the mutual interaction of the system of deformable bodies (elements) has been performed while improving the physical and geometric char

APA, Harvard, Vancouver, ISO, and other styles

8

Li, Bin, and Bo Zhu. "Parameterized Computing System on Structure of Lift Scaffolding Attached to the Wall." Applied Mechanics and Materials 130-134 (October 2011): 3972–77. http://dx.doi.org/10.4028/www.scientific.net/amm.130-134.3972.

Full text

Abstract:

This paper focuses on the parameterized computing system on structure of lift scaffolding attached to the wall. Taking full advantage of the relevance between finite element analysis and computer programming, VB software as an input interface of the parameterized, and ANSYS finite element software to do the background analysis, the parametric program of APDL is automatically packaged and called when VB is used to do the second development on the ANSYS software. The structural parameterized design system of lift scaffolding attached to the wall is developed in this paper so that the calculation

APA, Harvard, Vancouver, ISO, and other styles

9

Tang, Li Hua, and Yao Wen Yang. "System-Level Modeling of Piezoelectric Energy Harvesters." Advanced Materials Research 79-82 (August 2009): 103–6. http://dx.doi.org/10.4028/www.scientific.net/amr.79-82.103.

Full text

Abstract:

Accurate modeling and computer aided simulation is advantageous during the design stage of a piezoelectric energy harvesting system. In this paper, system-level finite element modeling (FEM) of a cantilevered piezoelectric energy harvester with a resistor is conducted using ANSYS. Considering that practical energy harvesting circuit includes nonlinear electrical elements, which is beyond the modeling capability of ANSYS, an equivalent circuit modeling (ECM) method is proposed to address the problem. After the parameters of equivalent circuit are identified, system-level simulation is conducted

APA, Harvard, Vancouver, ISO, and other styles

10

Krupa, Yevhenii, Roman Demchuk, Artem Volobuiev, and Serhii Kis. "COMPARATIVE ANALYSIS OF SOFTWARE SYSTEMS FOR HYDRAULIC TURBINE FLOW SIMULATION." Bulletin of the National Technical University "KhPI". Series: Hydraulic machines and hydraulic units, no. 1 (October 10, 2023): 49–55. http://dx.doi.org/10.20998/2411-3441.2023.1.08.

Full text

Abstract:

A comprehensive review of modern software complexes used for calculating spatial flow in hydraulic turbine flow parts was conducted. The widely used software system, Ansys, was analyzed. An overview of Ansys was provided, including its history, popularity within the CFD community, key features, and capabilities for analyzing the flow parts of hydraulic turbines. The preprocessing tools, solver parameters, post-processing functions, and visualization capabilities of Ansys were described. The advantages and limitations of using Ansys for calculating spatial flow in hydraulic turbine flow parts w

APA, Harvard, Vancouver, ISO, and other styles

11

G, Avinash Naidu, S. P. Jagadish, Mahendra K. C, and Channaveera Swamy J. M. "Dynamic Investigation of Electric Vehicle Suspension System Using Solid Works and ANSYS Software." International Journal for Research in Applied Science and Engineering Technology 11, no. 8 (2023): 1047–56. http://dx.doi.org/10.22214/ijraset.2023.55294.

Full text

Abstract:

Abstract: The suspension system affects ride comfort, handling, and safety. Optimizing suspension systems to improve rider experience and boost electric car and bike adoption is crucial as their popularity grows. ANSYS Finite Element Analysis (FEA) can analyze and optimize suspension designs for electric automobiles and bikes. FEA with ANSYS suspension system analysis and optimization is covered in this study. Electric vehicles' lower centre of gravity and variable load distribution make suspension analysis unusual, as the introduction states. Stress distribution, deformation, natural frequenc

APA, Harvard, Vancouver, ISO, and other styles

12

G, Avinash Naidu, S. P. Jagadish, Mahendra K. C, and Channaveera Swamy J. M. "Dynamic Investigation of Electric Vehicle Suspension System Using Solid Works and ANSYS Software." International Journal for Research in Applied Science and Engineering Technology 11, no. 8 (2023): 1047–56. http://dx.doi.org/10.22214/ijraset.2023.55294.

Full text

Abstract:

Abstract: The suspension system affects ride comfort, handling, and safety. Optimizing suspension systems to improve rider experience and boost electric car and bike adoption is crucial as their popularity grows. ANSYS Finite Element Analysis (FEA) can analyze and optimize suspension designs for electric automobiles and bikes. FEA with ANSYS suspension system analysis and optimization is covered in this study. Electric vehicles' lower centre of gravity and variable load distribution make suspension analysis unusual, as the introduction states. Stress distribution, deformation, natural frequenc

APA, Harvard, Vancouver, ISO, and other styles

13

Bao, Jun Hua, and Wei Dong He. "Finite Element Contact Analysis of Locomotive Traction Gears." Advanced Materials Research 459 (January 2012): 19–24. http://dx.doi.org/10.4028/www.scientific.net/amr.459.19.

Full text

Abstract:

The parametric solid models and assemble model are built in Pro/Engineer software system on the base of basic parameters of locomotive traction gears. The dedendum transition curves of teeth are fit by inputting the accurate coordinates of real curve of tooth that machined by gear hob after analyzing the envelopment processing of tooth. Assembling the driving and driven gears in Pro/Engineer system, and then the assemble model is imported into ANSYS software system, the settings of finite element analysis are defined, the finite element contact analysis of the driving and driven gears is done

APA, Harvard, Vancouver, ISO, and other styles

14

Selim, Taskaya, and Taskaya Semih. "MAPPING OF STRESS DISTRIBUTIONS OF HANGAR ROOF SYSTEMS IN ANSYS SOFTWARE." International Journal of Advance Engineering and Research Development e-ISSN (O): 2348-4470 p-ISSN (P): 2348-6406 6, no. 2 (2019): 82–89. https://doi.org/10.5281/zenodo.2585664.

Full text

Abstract:

The hangar roof system is covered with a roof that is carried by overhead steel posts or columns that protect various goods or tools from external influences. Ansys software programs is a simulation software program used in engineering areas in recent years. Studies related to this program are used after the design phase and before the prototype is produced, it allows testing in a virtual environment. With the 3-dimensional 54 edge and 35 corner coordinate points, the hangar roof model formed with 46x50 mm base supporting cylinder pipe diameter was applied 200 Newton force to 5 support beam po

APA, Harvard, Vancouver, ISO, and other styles

15

Lu, Xiao Yang, Zhi Dan Wang, Xiao Wei Zhao, and Wang Chao. "Five Developed Cylinder Reticulated Shell ANSYS Parametric Modelings." Applied Mechanics and Materials 166-169 (May 2012): 743–46. http://dx.doi.org/10.4028/www.scientific.net/amm.166-169.743.

Full text

Abstract:

Based on the geometric characteristics of developed cylinder shell, five methods of node generation and element connection were proposed in the cylindrical coordinate system. The corresponding macro programmers were made by means of ANSYS software parametric design language. Five developed cylindrical shell parametric modelings were achieved under the conditions of the given shell types, span, vector height, length, the grid number of length wise direction and cross wise direction. Applied examples show that this parametric modeling method and programmers are simple, efficient and useful, whic

APA, Harvard, Vancouver, ISO, and other styles

16

Krstić, Mladen, Branislav Milenković, and Đorđe Jovanović. "Numerical analysis of wagon leaf spring using Ansys 14.5." IMK-14 - Istrazivanje i razvoj 27, no. 4 (2021): 119–23. http://dx.doi.org/10.5937/imk2103119k.

Full text

Abstract:

Leaf springs are widely used for the suspension system in trains and commercial vehicles to absorb vibrations and shocks. This paper deals with the methodology of analysis of the leaf springs of the freight railway wagons by using software package Ansys 14.5. The methodology is applied in a concrete example of leaf spring for axle load of 225 kN. The procedure of forming the CAD model of the leaf spring using AutoCad and Autodesk Inventor is exposed, as well as the development of numerical model in Ansys software package. The results of the static analysis of given leaf spring are presented an

APA, Harvard, Vancouver, ISO, and other styles

17

Liang, Xiao Dan. "Study on the Information System of Tunnel Stability in Arching Process of Surrounding Rock." Applied Mechanics and Materials 716-717 (December 2014): 256–59. http://dx.doi.org/10.4028/www.scientific.net/amm.716-717.256.

Full text

Abstract:

It studied the early stability model of tunnels and establish the computer information system of early stability by using general software of ANSYS and Matlab in the paper. Firstly,the stress is displayed successfully through the model of stress intensity checking and algorithm. Then,it analyzed the influence of stress on surrounding rock in the arching process by using ANSYS software to calculate stress distribution in surrounding rock.Finally,it obtained the visualization display by using Matlab. Due to the limited conditions of computer, the numerical modeling process can not simulate the r

APA, Harvard, Vancouver, ISO, and other styles

18

Sherov, K. T., M. R. Sikhimbayev, A. K. Sherov, et al. "Mathematical Modeling of Thermofrictional Milling Process Using ANSYS WB Software." Journal of Theoretical and Applied Mechanics 47, no. 2 (2017): 24–33. http://dx.doi.org/10.1515/jtam-2017-0008.

Full text

Abstract:

Abstract This article presents ANSYS WB-based mathematical modelling of the thermofrictional milling process, which allowed studying the dynamics of thermal and physical processes occurring during the processing. The technique used also allows determination of the optimal cutting conditions of thermofrictional milling for processing various materials, in particular steel 40CN2MA, 30CGSA, 45, 3sp. In our study, from among a number of existing models of cutting fracture, we chose the criterion first proposed by prof. V. L. Kolmogorov. In order to increase the calculations performance, a mathemat

APA, Harvard, Vancouver, ISO, and other styles

19

Grigorov, I. N., V. N. Kaminsky, R. V. Kaminsky, et al. "Development of a low-pressure turbocharger with axial turbine for a two-stage turbocharging system." Izvestiya MGTU MAMI 8, no. 4-1 (2014): 11–14. http://dx.doi.org/10.17816/2074-0530-67618.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Alzghoul, Mohammad, Ferenc Sarka, and Ferenc J. Szabó. "A Spindle System Analysis Using Systems Receptance Coupling Approach." Design of Machines and Structures 12, no. 2 (2022): 25–32. http://dx.doi.org/10.32972/dms.2022.010.

Full text

Abstract:

The goal of this study is to dynamically simulate a turning-centre main spindle system utilizing the systems receptance coupling technique to determine the spindle system's first three resonant frequencies in the event of transverse vibrations. The findings are then confirmed using the finite element technique using ANSYS software. The significance of analysing the spindle system described in this study is that it can be utilized to optimize the spindle system in terms of resonance frequencies for improved performance in terms of spindle vibration while the turning centre is in operation.

APA, Harvard, Vancouver, ISO, and other styles

21

Bao, Guang Ming, Juan Chang, and Zhi Gang Liu. "Research on the Mine Slope Stress Detection and Warning System." Applied Mechanics and Materials 484-485 (January 2014): 953–57. http://dx.doi.org/10.4028/www.scientific.net/amm.484-485.953.

Full text

Abstract:

The innovation of computer software and hardware technology has brought the power to support strong for the numerical simulation technology, and computer three-dimensional simulation has been applied to various engineering fields. Engineering safety early warning system is a hot problem of the computer simulation, in which using the ANSYS computer software can calculate the stress numerical in engineering to carry out stress analysis, which could realize the function of engineering safety early warning. In this paper, the mining slope stress calculation and prediction as an example, we carry o

APA, Harvard, Vancouver, ISO, and other styles

22

Ganesh, V., and T. Abinaya. "Thermal Analysis of Two Wheeler Brake Disc Using ANSYS." Applied Mechanics and Materials 787 (August 2015): 301–5. http://dx.doi.org/10.4028/www.scientific.net/amm.787.301.

Full text

Abstract:

This paper deals with the transient thermal analysis of brake disc of Variable Braking Force (VBF) system using computer software ANSYS. Generally, brake system is designed to apply frictional resistance to stop the vehicle. In VBF system the frictional resistance applied to the brake disc can be varied by changing the effective disc radius based on the pillion load. The rotor disc is commonly manufactured using cast iron (CI) or stainless steel (SS). In this work, these materials are taken for analysing the temperature distribution of VBF system. In addition to, an effort has been made here t

APA, Harvard, Vancouver, ISO, and other styles

23

Pei, Shan Bao, and Rong Zhong Liu. "Research on Air-Structure Coupling Dynamic Characteristics of Sounding Board Driven by Gunpowder Pulsation." Advanced Materials Research 228-229 (April 2011): 864–68. http://dx.doi.org/10.4028/www.scientific.net/amr.228-229.864.

Full text

Abstract:

In this paper the author tries to establish the corresponding air-structure coupling dynamic characteristic equation of the sounding board system, in line with the coupling fluid flow as well as the prestress conditions, then this dynamic characteristic equation is simplified.The coupling modal of the whole sounding board system is calculated by using the software of ansys, and the data of gunpowder explosion pressure pulsation is obtained from the calculation in autodyn, then the frequency and modal of the sounding board system were further analyzed in the software of ansys. The results show

APA, Harvard, Vancouver, ISO, and other styles

24

Xucai, Shao, Zhao Jinghong, Chen Hansi, Zhou Yinping, and Mao Yinhao. "Predictive Model for Conducting Electromagnetic Interference by Bidirectional Excitation Controller." E3S Web of Conferences 256 (2021): 01006. http://dx.doi.org/10.1051/e3sconf/202125601006.

Full text

Abstract:

Bidirectional excitation controller is used in the excitation system of brushed DC motor. There are many monitoring sensors and weak current switches nearby. Therefore, it is necessary to study the conduction interference of the excitation controller. Firstly, based on the working principle of bidirectional excitation controller, the propagation path model and corresponding equivalent circuit of bidirectional excitation controller are established. Then, the parasitic capacitance parameters between the switch tube and the heat sink were extracted by ANSYS Q3D software, and the dynamic model of

APA, Harvard, Vancouver, ISO, and other styles

25

Ma, Chang Lin, Feng Li, Yong Bao Feng, and Xiao Guang Yao. "The Study on Dynamic Modeling of Complex Mechanism Based on Multi Software Collaboration." Advanced Materials Research 945-949 (June 2014): 87–90. http://dx.doi.org/10.4028/www.scientific.net/amr.945-949.87.

Full text

Abstract:

At present, the accurate dynamic modeling and simulation of complex movement mechanism using a single software is a difficult problem. The paper proposes the "collaborative simulation run" method of multi-domain model based on the interfaces of multi simulation software, and it can achieve the design and analysis of complex mechanism system. Selecting the 3D modeling software Pro/E, the dynamics analysis software ADAMS and finite element analysis software ANSYS as a collaborative modeling analysis platform, the transmission relationship between software data interfaces is studied, and the rigi

APA, Harvard, Vancouver, ISO, and other styles

26

Wan, Peng, Xiaoyan Lei, Weibin Wu, Qiongqing Hu, Ling Wan, and Guilin Li. "Simulation Analysis of Coupled Structural Vibration of Highway Railway Combined Bridge Induced by Overlapping Action of Vehicle and Train." Geofluids 2022 (June 7, 2022): 1–15. http://dx.doi.org/10.1155/2022/1986593.

Full text

Abstract:

In order to study the dynamic response of bridge coupling caused by the overlapping of vehicle and railway dynamic loads, by using the time-domain samples of pavement irregularity compiled by MATLAB software and the secondary development function of ANSYS software, the vehicle, bridge, and train models are established in ANSYS software at the same time, and the train supported beam bridge coupling program is compiled with MATLAB software. The model considers the influence of initial conditions and vehicle speed on the system before entering the bridge, the interaction between the coupled large

APA, Harvard, Vancouver, ISO, and other styles

27

Maksimov, Peter, Oleg Smetannıkov, Aleksandra Dubrovskaya, Konstantin Dongauzer, and Leonid Bushuev. "Numeric simulation of aircraft engine parts additive manufacturing process." MATEC Web of Conferences 224 (2018): 01065. http://dx.doi.org/10.1051/matecconf/201822401065.

Full text

Abstract:

This paper presents the results of software (ANSYS software) improvements specific for modeling the physical process of SLM (Selective Laser Melting). Improvement goal was to create a set of mathematical models and user environment (a set of APDL programs) based on the ANSYS finite element analysis system solver, allowing to perform the technological procedure of physical SLM process numerical modeling to the required degree of precision with an estimate of the final distortion and residual stresses of gas turbine engine parts to optimize the manufacturing process.

APA, Harvard, Vancouver, ISO, and other styles

28

Zhang, Yun Dian, and Zhong Qiu Ma. "The Study of Resonant Frequency of Horn and Circular Tool of Ultrasonic Milling System." Applied Mechanics and Materials 628 (September 2014): 283–86. http://dx.doi.org/10.4028/www.scientific.net/amm.628.283.

Full text

Abstract:

Based on the traditional analytic method and four-end network method, a tapered transition-type ultrasonic horn is designed and analyzed by ANSYS Workbench software. The composite horn avoids the limitations of single-horn and the resonant frequency of the horn is good to meet the design requirement. Through the ANSYS Workbench , the circular tool used for cutting the Nomex honeycomb core materials is analyzed. The test results shows that the resonant frequency of the circular tool is too small to meet the design requirement when the tool have a good modes. But after the optimize design by the

APA, Harvard, Vancouver, ISO, and other styles

29

Pooja, Khese, Patil Rohit, and N. Jani Swapnil. "Force Calculation by Reluctance Method in Triangular Air-Gap Magnetic System." International Journal of Engineering and Advanced Technology (IJEAT) 9, no. 3 (2020): 2171–74. https://doi.org/10.35940/ijeat.C5550.029320.

Full text

Abstract:

Magnetic circuit in MCCB should be reliable as Reliability is the main concern if MCCB used as the protection to the main appliances. Air-gap plays critical role in any magnetic system as increase and decrease in it will cause shift in saturation level. In this paper we are going to see the effect of air-gap variation in case of triangular air-gap. Here, Ansys software is used for magneto static analysis of the magnetic system. Relation between analytic formulation and ansys data is given by variation factor, which is used to establish force in given triangular system by just mathematical form

APA, Harvard, Vancouver, ISO, and other styles

30

Nayeem Imtiaz Imtiaz and Tasfia Siam Siam. "Analysis of Blood Flow in Human Brain Vessels for Newtonian and Non-Newtonian Blood Properties." CFD Letters 15, no. 9 (2023): 45–55. http://dx.doi.org/10.37934/cfdl.15.9.4555.

Full text

Abstract:

The cerebral artery system can be affected by various diseases such as stroke, carotid stenosis, vertebral stenosis, intracranial stenosis, aneurysms, and vascular malformations. Understanding the blood flow specific to each patient's cerebral arteries can provide crucial information about how these diseases progress and guide potential treatment options. A patient-specific Magnetic Resonance Imaging (MRI) scan of a human brain was utilized to create a 3D model of the arterial system. Blood flow simulations were conducted using the ANSYS (Fluent) R2021 software package. The ICEM meshing tool w

APA, Harvard, Vancouver, ISO, and other styles

31

Goldin Priscilla, C. P., and J. Selwin Rajadurai. "Failure phenomena in metallic and metal-lined polymer composite pressure vessels for aerospace applications." Transactions of the Canadian Society for Mechanical Engineering 45, no. 3 (2021): 479–86. http://dx.doi.org/10.1139/tcsme-2020-0204.

Full text

Abstract:

Metallic and metal-lined polymer composite pressure vessels are extensively used in industries, including the aerospace industry. In the absence of unique failure criteria for the structural elements, phenomenological or empirical methodologies are used by researchers. This paper discusses comprehensive methodologies for predicting burst pressure of metallic and metal-lined polymer composite pressure vessels for aerospace applications. Metallic pressure vessels were analysed using Ansys software, considering the elastic-plastic nature of the materials. The progressive analysis was performed in

APA, Harvard, Vancouver, ISO, and other styles

32

TUSHAR, JAIN, S. JAIN SHUBHAM, KAZI SHABNAM, and JAIN S. R. DULANGE VISHAL. "BENDING STRESS AND THERMAL ANALYSIS OF SPUR GEAR BY USING FEM." JournalNX - A Multidisciplinary Peer Reviewed Journal NITET2017 (March 16, 2017): 70–73. https://doi.org/10.5281/zenodo.1461386.

Full text

Abstract:

Gear is the one of the important machine element in the mechanical power transmission system. Spur gear is most basic gear used to transmit power between parallel shafts. Spur gear generally fails by bending failure or contact failure. This paper deals with the bending stress calculation of spur gear theoretically and validating it with ANSYS software. These meshed gears from the gear box are subjected to considerable damage throughout its life span due to dynamic excitations caused by terrain undulations, the rotating wheel and track assemblies. The friction between two rolling gears results

APA, Harvard, Vancouver, ISO, and other styles

33

Tang, Jin Gen, and Ji Yuan Deng. "PDE Computing Model of Internet Virtual Simulation Based on ANSYS." Applied Mechanics and Materials 556-562 (May 2014): 6106–10. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.6106.

Full text

Abstract:

This paper establishes a parallel Internet virtual simulation PDE computing model based on quasi-linear, linear and nonlinear mathematical principles of computer, and obtains a partial differential equation for parallel computing system. The parallel computing can greatly improve the speed and accuracy of computer virtual simulation system. In order to validate the calculation, the paper uses ACC-8S interface board to realize the parallel link of computer, and two pieces of different material deformation in machining process was simulated by ANSYS software, and it concludes the contour of defo

APA, Harvard, Vancouver, ISO, and other styles

34

Xu, Mei Rong, Bo Wen Wang, Meng Li, and Jian Xi Wang. "The Development and Simulation of the 3D FEM Software ---- Alpha System." Advanced Materials Research 690-693 (May 2013): 2826–30. http://dx.doi.org/10.4028/www.scientific.net/amr.690-693.2826.

Full text

Abstract:

Aimed at the Chinese FEM (Finite Element Method) software market was occupied by foreign company, the article introduced the FEM software----Alpha System, which was developed by us. Alpha System could deal with heat transfer and structure static problems. It had 6 modules such as project management, geometric modeling, meshing, loading, solving, and visualization. Some of the key technologies were afforded to solve the difficulties on achieving the software. At last, a part of car rear axle was simulated by Alpha and Ansys. The contrast analysis of the result proved the accuracy of Alpha Syste

APA, Harvard, Vancouver, ISO, and other styles

35

Chen, Yan Hai, Xiao Guang Han, Ye Guang Yang, and Yu Zhu Li. "Design and Finite Element Analysis of the Assemble Tooling System for Aircraft Thin-Wall Components." Advanced Materials Research 338 (September 2011): 189–92. http://dx.doi.org/10.4028/www.scientific.net/amr.338.189.

Full text

Abstract:

Aiming at the problems of low assembly precision and inefficient in the process of assembling thin-wall components of aircrafts , using the CATIA software to establish the 3D–model of the thin-wall components flexible tooling system. In order to improve the weak links of the system , application of the finite element software ANSYS to analysis the system, and using industrial PC to realize the controling of the whole system.

APA, Harvard, Vancouver, ISO, and other styles

36

Ranasinghe, Kaveen, and Hassan NOURI. "PANTOGRAPH ARC EROSION SIMULATION OF HIGH-SPEED RAIL WITH ANSYS SOFTWARE." International Journal of Engineering Applied Sciences and Technology 10, no. 01 (2025): 01–11. https://doi.org/10.33564/ijeast.2025.v10i01.001.

Full text

Abstract:

— ANSYS finite element analysis software is used with the aim of gaining a deeper understanding of arc erosion in pantograph systems. Potential solutions are identified for arc erosion reduction and to overcome the challenges faced by the railway industry in terms of increased operational costs, traction power losses and system malfunctioning. The study evaluates the performance of various contact materials, including pure graphite, pure copper, and two graphite-copper composites (C-Cu60 and C-Cu32), under simulated arc conditions. The results demonstrate that the material composition and its

APA, Harvard, Vancouver, ISO, and other styles

37

Zhang, Guo Zhi, and Ning Zhou. "The Development of Computing System with Equivalent Beam Element Based on Matlab Software." Advanced Materials Research 479-481 (February 2012): 1161–64. http://dx.doi.org/10.4028/www.scientific.net/amr.479-481.1161.

Full text

Abstract:

The computing method of series traction mechanism of heavy machinery was studied. The scheme of its computing system with equivalent beam element was proposed. Based on this scheme, combining with secondary development of language of Matlab, the computing system was developed. Through comparing with the reslut of enity element with ANSYS, the computing system was verified. Beacause of the computing system developed, the computating efficiency is improved and the accuracy is ensured.

APA, Harvard, Vancouver, ISO, and other styles

38

Yuan, Chong Yang, Di Zheng, Jian Ming Zhan, and Li Yong Hu. "Stability Analysis of the MRT-Based Compliant Polishing Tool System." Applied Mechanics and Materials 201-202 (October 2012): 473–76. http://dx.doi.org/10.4028/www.scientific.net/amm.201-202.473.

Full text

Abstract:

In order to meet the needs for the precise polishing of free-form surfaces, a new compliant polishing tool system was designed based on a magnetorheological torque servo (MRT), and integrated into a CNC milling machine. Through analysis, it was pointed out that the key factor affecting the polishing quality of this system is the stability of the system. By means of the 3D geometric modeling software ProE, the finite element analysis software ANSYS, and the dynamic simulation software ADAMS, the rigid-flexible mixed model of the system was established and the stability of the polishing pressure

APA, Harvard, Vancouver, ISO, and other styles

39

Tian, Xiao Fei, Hong Guang Zhang, and Xiao Lei Bai. "Strength Analysis and Structure Optimization of Constant Volume Combustion Bomb." Advanced Materials Research 233-235 (May 2011): 821–26. http://dx.doi.org/10.4028/www.scientific.net/amr.233-235.821.

Full text

Abstract:

Constant Volume Combustion Bomb (CVCB) is a useful experimental system in the internal combustion basic research. A new structure of CVCB was designed in this paper. Its solid model and finite element model were built through Pro-Engineer and ANSYS software. Then the strength was calculated and the structure was optimized to get the smallest volume with ANSYS. According to the optimization results, the volume decreased 50%.

APA, Harvard, Vancouver, ISO, and other styles

40

Harsito, Catur, Teguh Triyono, and Eki Roviyanto. "Analysis of Heat Potential in Solar Panels for Thermoelectric Generators using ANSYS Software." Civil Engineering Journal 8, no. 7 (2022): 1328–38. http://dx.doi.org/10.28991/cej-2022-08-07-02.

Full text

Abstract:

The growing demand for energy has an impact on the development of environmentally friendly renewable energy. The sun is energy that has the potential to be used as electrical energy through light energy and heat energy. Recently, research interest related to photovoltaic performance has increased. Several studies have investigated the effect of panel cooling on photovoltaic performance. In this study, the use of exergy solar panels is considered to improve performance by adding a thermoelectric system. Research work related to photovoltaic testing with thermoelectrics at low temperatures has n

APA, Harvard, Vancouver, ISO, and other styles

41

Chen, Jian Lin, Zhi Long Zhao, Guang Ming Yan, and Lin Liu. "Numerical Simulation of Temperature Field and Grain Structure in the Solidification of K4169 Superalloy Shell Casting." Materials Science Forum 532-533 (December 2006): 957–60. http://dx.doi.org/10.4028/www.scientific.net/msf.532-533.957.

Full text

Abstract:

The associated modeling method of complex foundry system was investigated under software environment of PRO/E and ANSYS. The 3D-structure of K4169 superalloy shell castings constructed by applying PRO/E was guided into ANSYS to reconstruct the whole foundry system. The variation of temperature field with solidifying time was calculated by ANSYS to check each key node in casting structures. According to the temperature changing curves of key nodes, the grain structural feature values were obtained by using consecutive nucleation model. Based on the 2D cellular automaton method, the evolution of

APA, Harvard, Vancouver, ISO, and other styles

42

Kagramanov, Yuri, Vladimir Tuponogov, Pavel Osipov, and Alexander Ryzhkov. "Syngas clean-up system kinetics investigation." Thermal Science 22, no. 1 Part B (2018): 699–707. http://dx.doi.org/10.2298/tsci170531218k.

Full text

Abstract:

Zinc oxide and hydrogen sulfide reaction was researched experimentally. Dynamic characteristics (solid phase mass change per time, temperature change per time inside the reactor, gas volume flow rate on inlet) were obtained for pure ZnO powder and granular sorbent Katalco 32-4-Johnson & Matthey by thermo-gravimetric analyzer. Pre-exponential factor, energy activation and specific mass flow rate of ZnO were numerically calculated for pure ZnO. Pure ZnO, ZnO2SC, and granular sorbent conversion rates were compared. Thermogravimetric experiments with pure ZnO and with ZnO2SC were simulated in

APA, Harvard, Vancouver, ISO, and other styles

43

Huang, Kuo Yi, Gwo Chung Tsai, and Wei Shiue Li. "Stress Analysis of Transmission System and Blade for Offshore Wind Power Generator." Applied Mechanics and Materials 275-277 (January 2013): 60–67. http://dx.doi.org/10.4028/www.scientific.net/amm.275-277.60.

Full text

Abstract:

This article will perform the stress analysis of transmission system and tower of offshore wind power generator . It first utilizes the computer engineering software GH Bladed to get the load on the offshore wind power generator, then ANSYS software is used to get the stress distribution in the structure. From the analytical results, the stress distribution in the structure can be a basic data to perform a new design or strengthen the structure.

APA, Harvard, Vancouver, ISO, and other styles

44

Tsaplin, S. V., and S. A. Bolychev. "MODELING OF INFLUENCE OF THERMAL SPACE FACTORS ON OPTICAL CHARACTERISTICS OF LENS TELESCOPE OF SPACECRAFT." Vestnik of Samara University. Natural Science Series 19, no. 3 (2017): 97–106. http://dx.doi.org/10.18287/2541-7525-2013-19-3-97-106.

Full text

Abstract:

The software based on software packages ANSYS, MathCAD, Zemax is developed to study the effects of thermal factors of space on the optical characteristics of spacecraft lens telescope. The calculation of time-dependent temperature and strain fields, the output parameters of optical system is carried out.

APA, Harvard, Vancouver, ISO, and other styles

45

Huang, Jingjing, Longxi Zheng, and Qing Mei. "Design and Optimization Method of a Two-Disk Rotor System." International Journal of Turbo & Jet-Engines 33, no. 1 (2016): 1–8. http://dx.doi.org/10.1515/tjj-2014-0033.

Full text

Abstract:

AbstractAn integrated analytical method based on multidisciplinary optimization software Isight and general finite element software ANSYS was proposed in this paper. Firstly, a two-disk rotor system was established and the mode, humorous response and transient response at acceleration condition were analyzed with ANSYS. The dynamic characteristics of the two-disk rotor system were achieved. On this basis, the two-disk rotor model was integrated to the multidisciplinary design optimization software Isight. According to the design of experiment (DOE) and the dynamic characteristics, the optimiza

APA, Harvard, Vancouver, ISO, and other styles

46

Tsaplin, S. V., and S. A. Bolychev. "THERMAL-CONTROL SYSTEM OF EXPERIMENTAL MODEL OF SPACECRAFT OPTICAL TELESCOPE ASSEMBLY." Vestnik of Samara University. Natural Science Series 19, no. 9.2 (2017): 236–43. http://dx.doi.org/10.18287/2541-7525-2013-19-9.2-236-243.

Full text

Abstract:

Software on the base of program package of ANSYS, MathCAD, Zemax for study of influence of thermal factors of space factor on optical characteristics of lens objective of spacecraft is developed. Calculation of non-stationary field of temperature and deformation, output data of lens objective for specific case is carried out.

APA, Harvard, Vancouver, ISO, and other styles

47

Tang, Xiu Ying, Dan Xiao, Ling Liu, En Rong Mao, Zheng He Song, and Yan Kun Peng. "A New Way of Virtual Prototype Design and Analysis for Tractor Steering System." Advanced Materials Research 605-607 (December 2012): 616–21. http://dx.doi.org/10.4028/www.scientific.net/amr.605-607.616.

Full text

Abstract:

A new way of virtual prototype design and analysis for tractor steering system was discussed, by which the function of experimental design and optimization design for the tractor steering system was achieved with three dimensional modeling software, kinematics and dynamics analysis software, finite element analysis software and their secondary development techniques. A non-sideslip analysis system based on VC++ platform for tractor steering system was developed, and the interface between softwares and key development procedures were introduced by using Pro/E, ANSYS and ADAMS softawre analysis

APA, Harvard, Vancouver, ISO, and other styles

48

Ren, Zheng Yi, Jing Na Liu, Yong Jie Han, and Wan Qing Teng. "Modal Analysis on 600 Wh Energy Storage Flywheel Rotor System." Key Engineering Materials 572 (September 2013): 521–24. http://dx.doi.org/10.4028/www.scientific.net/kem.572.521.

Full text

Abstract:

The three-dimensional finite element model of 600 Wh energy storage flywheel rotor system supported by active magnetic bearing (AMB) was built with the commercial software ANSYS to carry out the modal analysis. The modeling method of the AMB and their effect on the rotor system are explored. Modal analysis was performed, and the modal shapes of the rotor system were obtained. The Campbell diagram calculated by ANSYS was gained to be compared with the one calculated by the theoretical dynamics model. This research provides a theoretical basis for the rotor system design. The ideas and methods c

APA, Harvard, Vancouver, ISO, and other styles

49

Jeřábek, Matěj, Michal Volf, and Daniel Duda. "Designing a top cooling system for an electromagnetic calorimeter." MATEC Web of Conferences 345 (2021): 00015. http://dx.doi.org/10.1051/matecconf/202134500015.

Full text

Abstract:

The article describes a numerical simulation of flow in the cooling system of an electromagnetic calorimeter by analysing the temperature and pressure fields. Two fundamentally different approaches were used to analyse the pressure field - analytical 1D calculation and numerical 3D flow simulation. The article contains a detailed evaluation and description of individual analyses using the commercial software ANSYS 2020 R1.

APA, Harvard, Vancouver, ISO, and other styles

50

S, Karthik. "DESIGN AND ANALYSIS OF THE PISTON USING COMPOSITE MATERIALS LIKE AA7275 STRUCTURAL AND THERMAL ANALYSIS DONE IN ANSYS SOFTWARE." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 04 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem31147.

Full text

Abstract:

This project focuses on the design and analysis of a piston utilizing composite materials, particularly AA7275, to enhance structural integrity and thermal efficiency. The study employs ANSYS software to conduct comprehensive structural and thermal analyses. The structural analysis evaluates the mechanical behavior, stress distribution, and deformation characteristics of the piston under varying operating conditions. Meanwhile, the thermal analysis investigates the heat transfer mechanisms, temperature distribution, and thermal stress accumulation within the piston. By integrating composite ma

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!