Log in

Relevant bibliographies by topics / Applications; Educational; Rapid Prototyping / Journal articles

To see the other types of publications on this topic, follow the link: Applications; Educational; Rapid Prototyping.

Journal articles on the topic 'Applications; Educational; Rapid Prototyping'

Author: Grafiati

Published: 4 June 2021

Last updated: 15 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Applications; Educational; Rapid Prototyping.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Yusoff, Wan, and Emad El-Kashif. "Rapid Prototyping as a Tool of Fabricating Biomodel in Medical Applications: Technique and Cost Evaluation." Advanced Materials Research 1115 (July 2015): 627–30. http://dx.doi.org/10.4028/www.scientific.net/amr.1115.627.

Full text

Abstract:

Nowadays, a lot of technologies have been developed in order to design and construct the product easily and economically. Rapid Prototyping (RP) technology is one of the most utilized technologies when it comes to creating the prototype parts. The purpose of this project is to implement the rapid prototyping technology as a great value tool in supporting medical activities with consideration fabrication cost of biomodel. The RP technique applied to fabricate the biomodel is FDM and the material used is Acrylonitrile Butadiene Styrene (ABS). The models produced by using RP bring the significant in educational and pre-medical surgical environments. The fabricated biomodels are useful to simplify the complex surgical procedures and the visualization of anatomical structures in educational environment.

APA, Harvard, Vancouver, ISO, and other styles

2

Kotarski, Denis, Petar Piljek, Marko Pranjić, Carlo Giorgio Grlj, and Josip Kasać. "A Modular Multirotor Unmanned Aerial Vehicle Design Approach for Development of an Engineering Education Platform." Sensors 21, no. 8 (April 13, 2021): 2737. http://dx.doi.org/10.3390/s21082737.

Full text

Abstract:

The development of multirotor unmanned aerial vehicles (UAVs) has enabled a vast number of applications. Since further market growth is expected in the future it is important that modern engineers be familiar with these types of mechatronic systems. In this paper, a comprehensive mathematical description of a multirotor UAV, with various configuration parameters, is given. A modular design approach for the development of an educational multirotor platform is proposed. Through the stages of computer-aided design and rapid prototyping an experimental modular multirotor (EMMR) platform is presented. Open-source control system and a novel EMMR enable students to create and test control algorithms for various multirotor configurations. The presented EMMR platform is suitable for students to expand their educational objectives in aerial robotics and control theory.

APA, Harvard, Vancouver, ISO, and other styles

3

Falkowski, Piotr, and Andrzej Malcher. "Dynamically Programmable Analog Arrays in Acoustic Frequency Range Signal Processing." Metrology and Measurement Systems 18, no. 1 (January 1, 2011): 77–90. http://dx.doi.org/10.2478/v10178-011-0008-1.

Full text

Abstract:

Dynamically Programmable Analog Arrays in Acoustic Frequency Range Signal ProcessingField programmable analog arrays (FPAA), thanks to their flexibility and reconfigurability, give the designers quite new possibilities in analog circuit design. The number of both academic projects on FPAA and applications of commercially available programmable devices is still growing. This paper explores the properties and parameters of two most popular FPAA circuits: the AnadigmVortex AN221E04 and AnadigmApex AN231E04 from the Anadigm company. The research conducted by the authors led to the discovery of some undocumented features of these devices. Several applications for audio processing were built and tested. The results show that these circuits can be used in medium-demanding audio applications. Thanks to dynamic reconfigurability, they also allow to build an universal analog audio signal processor. These circuits can also act as a versatile platform for rapid prototyping and educational purposes.

APA, Harvard, Vancouver, ISO, and other styles

4

Mavromanolakis, Georgios, T. Manousos, M. Kechri, P. L. Kollia, and G. Kanellopoulos. "Studying, designing and 3d-printing an operational model of the Antikythera Mechanism." Open Schools Journal for Open Science 1, no. 3 (May 20, 2019): 70. http://dx.doi.org/10.12681/osj.17965.

Full text

Abstract:

3D printing technology is an established industrial practice for rapid prototyping and manufacturing across a range of products, components and commercial sectors and at the same time possesses great potential for every-day life applications to be invented, explored and developed by the coming generations of scientists and engineers. A 3D printer installed in a school setting and complemented by well-designed educational activities can: stimulate the interest and curiosity of students; engage and motivate them into studying science, technology, engineering and mathematics (STEM) subjects, that they may choose or consider as career options; give the opportunity to teachers to achieve content and concept learning in an innovative way. In this paper we present an interdisciplinary science course that was developed for high school students and was implemented in an actual science classroom. The objectives of the course were both to spark the interest and creativity of students and teach them certain curriculum units the content knowledge of which is reached or utilized in an unconventional way. Students are gradually introduced into the 3D printing technology, its application and potential and are assigned a challenging collaborative project in which they have to study, analyse, design and build, using the 3D printer of their school, an operational model of a renown ancient artefact, the so-called Antikythera Mechanism. The mechanism is a 2100-year-old computer and is internationally known as an artefact of unprecedented human ingenuity and scientific, historic and symbolic value. The course involves the teaching of STEM curriculum domains of physics, astronomy, mathematics/geometry, informatics and technology related content and also non-STEM subjects like history and Greek language, both ancient and modern. We give an overview of the course, discuss its various phases and highlight its outcomes.

APA, Harvard, Vancouver, ISO, and other styles

5

Weis, Torben, Mirko Knoll, Andreas Ulbrich, Gero Muhl, and Alexander Brandle. "Rapid Prototyping for Pervasive Applications." IEEE Pervasive Computing 6, no. 2 (April 2007): 76–84. http://dx.doi.org/10.1109/mprv.2007.41.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Hahn, Jim, and Alaina Morales. "Rapid Prototyping a Collections-based Mobile Wayfinding Application." Journal of Academic Librarianship 37, no. 5 (September 2011): 416–22. http://dx.doi.org/10.1016/j.acalib.2011.06.001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bannach, David, Oliver Amft, and Paul Lukowicz. "Rapid Prototyping of Activity Recognition Applications." IEEE Pervasive Computing 7, no. 2 (April 2008): 22–31. http://dx.doi.org/10.1109/mprv.2008.36.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hwang, Kao-Shing, Wen-Hsu Hsiao, Gaung-Ting Shing, and Kim-Joan Chen. "Rapid Prototyping Platform for Robotics Applications." IEEE Transactions on Education 54, no. 2 (May 2011): 236–46. http://dx.doi.org/10.1109/te.2010.2049359.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Hieu, L. C., N. Zlatov, J. Vander Sloten, E. Bohez, L. Khanh, P. H. Binh, P. Oris, and Y. Toshev. "Medical rapid prototyping applications and methods." Assembly Automation 25, no. 4 (December 2005): 284–92. http://dx.doi.org/10.1108/01445150510626415.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Stampfl, Jürgen, and Robert Liska. "New Materials for Rapid Prototyping Applications." Macromolecular Chemistry and Physics 206, no. 13 (July 5, 2005): 1253–56. http://dx.doi.org/10.1002/macp.200500199.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Reuther, Albert, and Jeremy Kepner. "Rapid prototyping of radar algorithms [Applications Corner." IEEE Signal Processing Magazine 26, no. 6 (November 2009): 158–62. http://dx.doi.org/10.1109/msp.2009.934178.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Schloßer, Axel, Alexander Bollig, and Dirk Abel. "Rapid Control Prototyping in der Lehre (Rapid Control Prototyping in Education)." at - Automatisierungstechnik 52, no. 2-2004 (February 2004): 75–80. http://dx.doi.org/10.1524/auto.52.2.75.25910.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Edwards, K. L. "Rapid manufacturing — the technologies and applications of rapid prototyping and rapid tooling." Materials & Design 23, no. 3 (May 2002): 347–48. http://dx.doi.org/10.1016/s0261-3069(01)00077-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Woodwark, John. "Rapid prototyping in CAD." Computer-Aided Design 24, no. 8 (August 1992): 403–4. http://dx.doi.org/10.1016/0010-4485(92)90007-w.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Morishige, Koichi, Masahiro Anzai, and Hiroyuki Narahara. "Special Issue on Rapid Prototyping." International Journal of Automation Technology 6, no. 5 (September 5, 2012): 569. http://dx.doi.org/10.20965/ijat.2012.p0569.

Full text

Abstract:

Layered manufacturing is the generic name for a processing method used to obtain an actual model by calculating cross-sectional shapes from 3D CAD data and stacking these shapes. Because it can realize any shape without needing skills for devising a processing method and fabricating fixtures, layered machining is expected to realize 3D printing that enables even inexperienced or amateur operators to obtain actual 3D shapes. Since the model such as injection molding can be fabricated without using dies and molds, layered manufacturing is now called rapid prototyping (RP). Since ever manufacturing of high-strength materials has become available, RP applications have been deployed in areas from models for more confirmation of shape to functional models attached to prototypes such as engines and used for test runs. In addition, the new concepts called rapid manufacturing (RM) and rapid tooling (RT), which are used in the manufacture of low-volume products and production equipment, have been proposed and implemented. This special issue focuses on RP technology. Among its many interesting papers are those that focus on new fabrication techniques, material development for RP, CAD/CAM systems for RP, new RP systems, and applications for RP. We are certain that you will find this issue both interesting and informative. We thank the authors for their generous cooperation and the editing staff for its many contributions.

APA, Harvard, Vancouver, ISO, and other styles

16

YAO, Shan. "New laser rapid prototyping method and its applications." Chinese Journal of Mechanical Engineering 43, no. 05 (2007): 230. http://dx.doi.org/10.3901/jme.2007.05.230.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Sharma, Purushottam, Dheeraj Joshi, Ajay Dhanopia, and Mahesh Sharma. "A review of rapid prototyping and its applications." SKIT Research Journal 10, no. 1 (March 31, 2020): 89. http://dx.doi.org/10.47904/ijskit.10.1.2020.89-97.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Banoriya, Deepen, Rajesh Purohit, and R. K. Dwivedi. "Modern Trends in Rapid Prototyping for Biomedical Applications." Materials Today: Proceedings 2, no. 4-5 (2015): 3409–18. http://dx.doi.org/10.1016/j.matpr.2015.07.316.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Giovacchini, Francesco, Massimiliano Gilli, Valeria Mitro, Gabriele Monarchi, Caterina Bensi, and Antonio Tullio. "Rapid prototyping: applications in oral and maxillofacial surgery." Journal of Oral Medicine and Oral Surgery 27, no. 1 (December 8, 2020): 11. http://dx.doi.org/10.1051/mbcb/2020050.

Full text

Abstract:

This article documents four mandibular reconstructions performed using free fibula flaps. CT scan DICOM (Digital Imaging and COmmunication in Medicine) files were obtained in order to print stereolithographic models of the mandible, and in one case cutting guides for fibular osteotomies. One case study details the treatment a cancer recurrence on a right emimandibulectomy. Because of a lack of access to previous CT scans, the left part of the mandible was mirrored to obtain an accurate 3D model. In one case, due to the young age of the woman, a double barrel fibula flap was used. All cases resulted in satisfactory chewing function and aesthetic outcome, with no flap failures. The report concludes that Virtual Planning and Rapid Prototyping are helpful as they reduce costs and intraoperative times while simultaneously improving surgical precision.

APA, Harvard, Vancouver, ISO, and other styles

20

Negi, Sushant, Suresh Dhiman, and Rajesh Kumar Sharma. "Basics and applications of rapid prototyping medical models." Rapid Prototyping Journal 20, no. 3 (April 14, 2014): 256–67. http://dx.doi.org/10.1108/rpj-07-2012-0065.

Full text

Abstract:

Purpose – This study aims to provide an overview of rapid prototyping (RP) and shows the potential of this technology in the field of medicine as reported in various journals and proceedings. This review article also reports three case studies from open literature where RP and associated technology have been successfully implemented in the medical field. Design/methodology/approach – Key publications from the past two decades have been reviewed. Findings – This study concludes that use of RP-built medical model facilitates the three-dimensional visualization of anatomical part, improves the quality of preoperative planning and assists in the selection of optimal surgical approach and prosthetic implants. Additionally, this technology makes the previously manual operations much faster, accurate and cheaper. The outcome based on literature review and three case studies strongly suggests that RP technology might become part of a standard protocol in the medical sector in the near future. Originality/value – The article is beneficial to study the influence of RP and associated technology in the field of medicine.

APA, Harvard, Vancouver, ISO, and other styles

21

Petzold, R., H. F. Zeilhofer, and W. A. Kalender. "Rapid prototyping technology in medicine—basics and applications." Computerized Medical Imaging and Graphics 23, no. 5 (October 1999): 277–84. http://dx.doi.org/10.1016/s0895-6111(99)00025-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Nyaluke, Adriano P., Donke An, Herman R. Leep, and Hamid R. Parsaei. "Rapid prototyping: Applications in academic institutions and industry." Computers & Industrial Engineering 29, no. 1-4 (September 1995): 345–49. http://dx.doi.org/10.1016/0360-8352(95)00096-j.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Stampfl, J., A. Wöß, S. Seidler, H. Fouad, A. Pisaipan, F. Schwager, and R. Liska. "Water Soluble, Photocurable Resins for Rapid Prototyping Applications." Macromolecular Symposia 217, no. 1 (October 2004): 99–108. http://dx.doi.org/10.1002/masy.200451308.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Dickens, P. M. "Research Developments in Rapid Prototyping." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 209, no. 4 (August 1995): 261–66. http://dx.doi.org/10.1243/pime_proc_1995_209_082_02.

Full text

Abstract:

Rapid prototyping is a new name for a group of techniques that have largely been developed during the last ten years. They involve producing parts by adding layers of material on top of each other to build a complete model. The research involved on these techniques is mainly being undertaken in North America, Europe and Japan, with many new advances occurring each year. There is still much scope for work in developing new rapid prototyping techniques and applications for the parts produced from them. The impact of these techniques on manufacturing is only just being recognized, but during the next few years academia and industry will accept them as a valuable addition.

APA, Harvard, Vancouver, ISO, and other styles

25

Pham, D. T., and S. S. Dimov. "Rapid prototyping and rapid tooling—the key enablers for rapid manufacturing." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217, no. 1 (January 1, 2003): 1–23. http://dx.doi.org/10.1243/095440603762554569.

Full text

Abstract:

Rapid manufacturing is a new mode of operation that can greatly improve the competitive position of companies adopting it. The key enabling technologies of rapid manufacturing are rapid prototyping (RP) and rapid tooling (RT). This paper classifies the existing RP processes and briefly describes those with actual or potential commercial impact. The paper then discusses five important RP applications: building functional prototypes, producing casting patterns, making medical and surgical models, creating artworks and fabricating models to assist engineering analysis. Finally, the paper gives an overview of indirect and direct RT methods for quickly producing up to several thousand parts together with examples illustrating different applications of RT.

APA, Harvard, Vancouver, ISO, and other styles

26

Del Fiol, Guilherme, Haley Hanseler, Barbara Crouch, Mollie Cummins, and Scott Nelson. "Software prototyping." Applied Clinical Informatics 07, no. 01 (January 2016): 22–32. http://dx.doi.org/10.4338/aci-2015-07-cr-0091.

Full text

Abstract:

SummaryHealth information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping.To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping.Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS).Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system.

APA, Harvard, Vancouver, ISO, and other styles

27

Mätzler, Stefan, Stefan Theurich, Martin Wollschläger, and Markus Simros. "Rapid Prototyping von applikationsprofilkonformen Feldgeräten." at - Automatisierungstechnik 61, no. 6 (June 2013): 415–26. http://dx.doi.org/10.1524/auto.2013.0036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Shan, Z., Y. Yan, R. Zhang, and F. Qi. "Rapid tooling using plasma spraying and rapid prototyping." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 217, no. 1 (January 1, 2003): 97–104. http://dx.doi.org/10.1243/095440603762554640.

Full text

Abstract:

In the race to fabricate a product to market with increases in speed, cost and quality, the drive to economically decrease tooling lead times becomes more important. Rapid tooling (RT) fabricated at Tsinghua University uses a metal plasma spraying process and rapid prototyping (RP) to form a metal tool. The process uses plasma spraying as the heat pool to melt metal powder and then deposit molten metal on to the substrate made by RP. It provides a quick, accurate, simple and relatively cost effective route for producing metal parts or tools, especially for large tools. The process and key technologies are analysed and described in detail. Applications illustrate that the total costs and lead times for new products can be reduced.

APA, Harvard, Vancouver, ISO, and other styles

29

Vloeberghs, Michael, Frazer Hatfield, Farhanj Daemi, and Philip Dickens. "Soft Tissue Rapid Prototyping in Neurosurgery." Computer Aided Surgery 3, no. 2 (January 1998): 95–97. http://dx.doi.org/10.3109/10929089809148135.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Vloeberghs, Michael, Frazer Hatfield, Farhanj Daemi, and Philip Dickens. "Soft tissue rapid prototyping in neurosurgery." Computer Aided Surgery 3, no. 2 (1998): 95–97. http://dx.doi.org/10.1002/(sici)1097-0150(1998)3:2<95::aid-igs7>3.0.co;2-f.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Vloeberghs, Michael, Frazer Hatfield, Farhanj Daemi, and Philip Dickens. "Soft tissue rapid prototyping in neurosurgery." Computer Aided Surgery 3, no. 2 (1998): 95–97. http://dx.doi.org/10.1002/(sici)1097-0150(1998)3:2<95::aid-igs7>3.3.co;2-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Conley, J. G., and H. L. Marcus. "Rapid Prototyping and Solid Free Form Fabrication." Journal of Manufacturing Science and Engineering 119, no. 4B (November 1, 1997): 811–16. http://dx.doi.org/10.1115/1.2836828.

Full text

Abstract:

This article will give a brief review of the start-of-the-art in commercial practice and advanced research in the field of Rapid Prototyping with special attention to the additive methods of Solid Free Form Fabrication. Recent applications of this technology in computer integrated manufacturing environments will be outlined. Future applications and research in new materials will also be addressed.

APA, Harvard, Vancouver, ISO, and other styles

33

Chua, Chee Kai, Siaw Meng Chou, Sing Ching Lin, Kee Hoe Eu, and Kok Fah Lew. "Rapid prototyping assisted surgery planning." International Journal of Advanced Manufacturing Technology 14, no. 9 (September 1998): 624–30. http://dx.doi.org/10.1007/bf01192281.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Pan, Jinping. "Automated tools for rapid prototyping." Journal of Computer Science and Technology 6, no. 3 (July 1991): 271–75. http://dx.doi.org/10.1007/bf02945515.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Šljivić, Milan, M. Stanojević, N. Grujović, and R. Radonjić. "OPTIMIZATION OF RAPID PROTOTYPING TECHNOLOGY FOR ADVANCED MEDICAL APPLICATIONS." Contemporary Materials 2, no. 1 (August 31, 2011): 76–83. http://dx.doi.org/10.5767/anurs.cmat.110201.en.076s.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Harms, Holger, Oliver Amft, Daniel Roggen, and Gerhard Tröster. "Rapid prototyping of smart garments for activity-aware applications." Journal of Ambient Intelligence and Smart Environments 1, no. 2 (2009): 87–101. http://dx.doi.org/10.3233/ais-2009-0015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Gibson, I., L. K. Cheung, S. P. Chow, W. L. Cheung, S. L. Beh, M. Savalani, and S. H. Lee. "The use of rapid prototyping to assist medical applications." Rapid Prototyping Journal 12, no. 1 (January 2006): 53–58. http://dx.doi.org/10.1108/13552540610637273.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Bohn, Christian, Hans-Jürgen Karkosch, Peter M. Marienfeld, and Ferdinand Svaricek. "Automotive Applications of Rapid Prototyping for Active Vibration Control." IFAC Proceedings Volumes 34, no. 1 (March 2001): 181–86. http://dx.doi.org/10.1016/s1474-6670(17)34395-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Joshi (Bhuskute), MedhaDilip, SP Dange, and AN Khalikar. "Rapid prototyping technology in maxillofacial prosthodontics: Basics and applications." Journal of Indian Prosthodontic Society 6, no. 4 (2006): 175. http://dx.doi.org/10.4103/0972-4052.30691.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Zhou, Wanlei. "A rapid prototyping system for distributed information system applications." Journal of Systems and Software 24, no. 1 (January 1994): 3–29. http://dx.doi.org/10.1016/0164-1212(94)90103-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Li, Peng Cheng, and Shuang Cheng Huang. "Application of Rapid Prototyping Technology in Automobile Manufacturing Industry." Applied Mechanics and Materials 533 (February 2014): 106–10. http://dx.doi.org/10.4028/www.scientific.net/amm.533.106.

Full text

Abstract:

Rapid prototyping technology manufactures the product prototype can be generated directly from 3D CAD data and can be regenerated easily after the design was modified. This paper introduces the principle of rapid prototyping technology and the applications of rapid prototyping technology in automobile design, development and production. It is notable that the rapid prototyping technology is an effective tool to reduce the development cost of automobile products and shorten the development cycle.

APA, Harvard, Vancouver, ISO, and other styles

42

Chua, C. K., S. H. Teh, and R. K. L. Gay. "Rapid prototyping versus virtual prototyping in product design and manufacturing." International Journal of Advanced Manufacturing Technology 15, no. 8 (July 1999): 597–603. http://dx.doi.org/10.1007/s001700050107.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Shan, Z., Y. Yan, R. Zhang, Q. Lu, and L. Guan. "Rapid Manufacture of Metal Tooling by Rapid Prototyping." International Journal of Advanced Manufacturing Technology 21, no. 7 (May 1, 2003): 469–75. http://dx.doi.org/10.1007/s001700300055.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Leonidis, Asterios, Margherita Antona, and Constantine Stephanidis. "Rapid Prototyping of Adaptable User Interfaces." International Journal of Human-Computer Interaction 28, no. 4 (March 2, 2012): 213–35. http://dx.doi.org/10.1080/10447318.2011.581891.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Jang, Junwon, Soohee Han, Hanjun Kim, Choon Ki Ahn, and Wook Hyun Kwon. "Rapid control prototyping for robot soccer." Robotica 27, no. 7 (March 17, 2009): 1091–102. http://dx.doi.org/10.1017/s0263574709005505.

Full text

Abstract:

SUMMARYIn this paper, we propose rapid-control prototyping (RCP) for a robot soccer using the SIMTool that has been developed in Seoul National University, Korea, for the control-aided control system design (CACSD). The proposed RCP enables us to carry out the rapid design and the verification of controls for two-wheeled mobile robots (TWMRs), players in the robot soccer, without writing C codes directly and requiring a special H/W. On the basis of the proposed RCP, a blockset for the robot soccer is developed for easy design of a variety of mathematical and logical algorithms. All blocks in the blockset are made up of basic blocks offered by the SIMTool. Applied algorithms for specific purposes can be easily and efficiently constructed with just a combination of the blocks in the blockset. As one of the algorithms implemented with the developed blockset, a novel navigation algorithm, called a reactive navigation algorithm using the direction and the avoidance vectors based scheme (RNDAVS), is proposed. It is shown through simulations and experiments that the RNDAVS designed with the proposed RCP can avoid a local minima and the goal non-reachable with obstacles nearby (GNRON) arising from the existing methods. Furthermore, in order to validate the proposed RCP in a real game, we employ an official simulation game for the robot soccer, the SimuroSot. Block diagrams are constructed for strategy, path calculation, and the interface to the SIMTool. We show that the algorithms implemented with the proposed RCP work well in the simulation game.

APA, Harvard, Vancouver, ISO, and other styles

46

Novakova-Marcincinova, Ludmila, and Jozef Novak-Marcincin. "Rapid Prototyping in Developing Process with CA Systems Application." Applied Mechanics and Materials 464 (November 2013): 399–405. http://dx.doi.org/10.4028/www.scientific.net/amm.464.399.

Full text

Abstract:

Rapid Prototyping (RP) presents the automatic production of physical parts using by additive manufacturing technology. The start techniques for Rapid Prototyping became available in the late 1980s and were used to produce models and prototype parts. Today they are used for a much wider range of applications and are even used to manufacture production-quality parts in relatively small numbers. Rapid Prototyping is widely used in the automotive, aerospace, medical, and consumer products industries. In paper is presented process of design product development, product production and testing of products produced by Fused Deposition Modelling rapid prototyping technology.

APA, Harvard, Vancouver, ISO, and other styles

47

LI, Shengjie. "Rapid Prototyping of Polyurethane Auricle Cartilage Scaffold." Journal of Mechanical Engineering 46, no. 05 (2010): 139. http://dx.doi.org/10.3901/jme.2010.05.139.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Cheah, C. M., C. K. Chua, C. W. Lee, C. Feng, and K. Totong. "Rapid prototyping and tooling techniques: a review of applications for rapid investment casting." International Journal of Advanced Manufacturing Technology 25, no. 3-4 (August 11, 2004): 308–20. http://dx.doi.org/10.1007/s00170-003-1840-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Wang, Hao, and Hong Ge Zhang. "State of the Art in Rapid Prototyping." Advanced Materials Research 549 (July 2012): 1046–50. http://dx.doi.org/10.4028/www.scientific.net/amr.549.1046.

Full text

Abstract:

Rapid prototyping has quickly grown in use and importance in industrial applications during the past decade. Rapid prototyping, though a relatively new discipline, has proven to be a valuable tool in the reduction of the time and cost associated with developing new products. This paper summaries the working principle and compares the application fields, machining cost and process parameters for four typical RP technology. The author discusses the significant performance for modern industry, analyses the merits and faults and indicates the development object for RP technology.

APA, Harvard, Vancouver, ISO, and other styles

50

Chen, Yong Hua, and Jia Nan Lu. "Sub-Surface Cutting for Rapid Prototyping." Advanced Materials Research 479-481 (February 2012): 561–64. http://dx.doi.org/10.4028/www.scientific.net/amr.479-481.561.

Full text

Abstract:

Subsurface engraving is the process of engraving an image inside a solid object, usually made of a transparent glass/crystal material. A diode-pumped solid-state (DPSS) laser with high beam quality and pulse power is normally used for subsurface engraving. The laser beam can be focused at any 3D point within a 3D envelope. At the focal point, due to high laser intensity, a small fracture or bubble is generated. The fractures can be as small as tens of microns. Currently, the image from subsurface engraving can only be seen, but not felt or touched. This has limited the applications of subsurface engraving to tourist souvenirs or artistic crafts. The authors propose that through some changes to the subsurface engraving process, it is feasible to separate the 3D image from the raw material block, and directly generate a 3D prototype that could not only be visualized, but also touched, or even used for subsequent design, or manufacturing processes. When generating the 3D point cloud, the points should be dense enough so that continuous cracks could be generated. It is expected that the cracks may form a gap, separating the image from the raw material block. In order to facilitate removal of the engraved image from the material block, the material portion that does not belong to the image is cut into small grids, such grids should be easily removed.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!