Log in

Relevant bibliographies by topics / Arcelor Mittal / Journal articles

To see the other types of publications on this topic, follow the link: Arcelor Mittal.

Journal articles on the topic 'Arcelor Mittal'

Author: Grafiati

Published: 25 July 2024

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 36 journal articles for your research on the topic 'Arcelor Mittal.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Volynets, Lyudmyla. "Ukrainische Gewerkschaften in ausländischen Unternehmen: Arcelor Mittal und Lactalis." Ukraine-Analysen, no. 47 (November 11, 2008): 13–16. http://dx.doi.org/10.31205/ua.047.02.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Raggi, Pascal. "Un demi-siècle de désindustrialisation en Lorraine du fer (1963-2013)." Cinquante ans de désindustrialisation, no. 1 (January 1, 2019): 87–103. http://dx.doi.org/10.57086/rrs.82.

Full text

Abstract:

Cette contribution porte, d’une part, sur une région française emblématique du développement industriel de la fin du xixe siècle et des trois premiers quarts du suivant – la Lorraine – et, d’autre part, sur deux secteurs de production non moins emblématiques du processus d’industrialisation : l’extraction du minerai de fer ainsi que la sidérurgie. Elle aborde la période 1963-2013, des grandes grèves de mineurs jusqu’aux problèmes récents du groupe sidérurgique Arcelor- Mittal à Florange-Hayange.

APA, Harvard, Vancouver, ISO, and other styles

3

Zaibet, Nour addin, and Dallel Hattab. "Analysis and Evaluation of Financial Performance Using inancial Indicators An Applied Study at Arcelor Mittal Annaba, 2014)-Algeria (2013." Milev Journal of Research and Studies 4, no. 1 (2018): 193–210. http://dx.doi.org/10.58205/mjrs.v4i1.1215.

Full text

Abstract:

The research aims to demonstrate the importance of analyzing andevaluating the financial performance of Arcelor Mittal Steel Annaba, basedon the financial indicators to analyze the financial performance, includingthe liquidity ratios, financial balance indicators, and cost indicators. Weused the analytical descriptive method to suit the research topic and theresults obtained. The financial indicators have shown that the financialposition of the institution is short term in the short term. The mainrecommendations of the research are the need to control the costs of alltypes.

APA, Harvard, Vancouver, ISO, and other styles

4

Luiz-Corrêa, W., H. Silva-Furtado, and J. R. De Oliveira. "Development for the production of low phosphorus steel in operations at Arcelor Mittal Tubarão." Revista de Metalurgia 49, no. 2 (2013): 85–91. http://dx.doi.org/10.3989/revmetalm.1140.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Meyers, Marc. "Luxembourg Transposes Takeover Directive Against the Backdrop of Mittal Steel’s Bid for Arcelor." European Company Law 3, Issue 6 (2006): 261–64. http://dx.doi.org/10.54648/eucl2006067.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Itu, Răzvan Bogdan, Florin Vîlceanu, and Gheorghe Bogdan Urdea. "Determining the Position of the Center of Gravity by Tensiometric Measurements for the Machines with Bucket Wheels Used to Remove Coal from Deposits." Mining Revue 30, s1 (2024): 56–63. https://doi.org/10.2478/minrv-2024-0040.

Full text

Abstract:

Abstract The machines with bucket wheels used to remove and to put coal in deposits are intended to dump and remove coal from quarries and power station deposits. The paper presents how to determine the gravity center of a machine with bucket wheels used to remove coal from deposits, by tensiometric measurements, in various positions of the arm of the bucket rotor (wheel). The machine with bucket wheel used for taking out from deposits is within Arcelor Mittal Galați. The measurements have been made in limit positions of the arm of the bucket wheel, horizontally and vertically, respectively, a

APA, Harvard, Vancouver, ISO, and other styles

7

Romanelli, João P., Maria C. P. Gonçalves, Mayara F. Costa, and Ana M. M. L. Carvalho. "Effect of Genetic Material and Rotation on the Properties of Charcoal." Ciência e Natura 40 (December 7, 2018): 71. http://dx.doi.org/10.5902/2179460x32401.

Full text

Abstract:

This study aimed to evaluate chemical properties and yield of charcoal from two Eucalyptus urophylla clones considering the first and second rotation of the wood. The study was carried out with material from Arcelor Mittal Jequitinhonha, with a mean age of 61.5 months. The values of fixed carbon, volatile materials, ash content, higher calorific value, gravimetric yield, liquid yield and gas yield were determined. The data were analyzed statistically by Analysis of Variance (ANOVA) and significant differences were compared by the Tukey test (p <0.05). The results showed significant differen

APA, Harvard, Vancouver, ISO, and other styles

8

Falkus, J., and K. Miłkowska-Piszczek. "Strategy of Cooling Parameters Selection in the Continuous Casting of Steel." Archives of Metallurgy and Materials 61, no. 1 (2016): 329–34. http://dx.doi.org/10.1515/amm-2016-0061.

Full text

Abstract:

This paper presents a strategy of the cooling parameters selection in the process of continuous steel casting. Industrial tests were performed at a slab casting machine at the Arcelor Mittal Poland Unit in Krakow. The tests covered 55 heats for 7 various steel grades. Based on the existing casting technology a numerical model of the continuous steel casting process was formulated. The numerical calculations were performed for three casting speeds - 0.6, 0.8 and 1 m min-1. An algorithm was presented that allows us to compute the values of the heat transfer coefficients for the secondary cooling

APA, Harvard, Vancouver, ISO, and other styles

9

Bryant, Corrie Wrepoandeh, Dr Florence Muthoni Mungathia, and Dr Mercy Muthiga Mauki. "The Strategies Adopted in Addressing the Challenges Facing the Girl Child Education in Liberia: A case of Arcelor Mittal School System, Yekepa Town." Journal of Education 4, no. 4 (2024): 25–37. http://dx.doi.org/10.70619/vol4iss4pp25-37.

Full text

Abstract:

The education of girls continues to be a concern in many parts of the world, including Liberia. In West Africa, the region where Liberia is located, it is widely thought that educating a girl child is unnecessary. Regardless of the differing viewpoints held by various individuals in different regions; education remains a basic human right based on the United Nations Universal Declaration of Human Rights. Particularly the girl child, who has been falling behind owing to a variety of causes like prejudice and negative traditions. This study aimed to explore the strategies adopted by the Arcelor

APA, Harvard, Vancouver, ISO, and other styles

10

David, J., Z. Jančíiková, R. Frischer, and M. Vrožina. "Crystallizer’s Desks Surface Diagnostics with Usage of Robotic System." Archives of Metallurgy and Materials 58, no. 3 (2013): 907–10. http://dx.doi.org/10.2478/amm-2013-0098.

Full text

Abstract:

Abstract Discussed problems are solved in Arcelor Mittal Ostrava a.s. company. VSB-TU Ostrava has its share on this solution in the frame of grant project TIP. The project has several goals, which relate with primary cooling system area in CSCD (Continuous Steel Casting Device). One target is concerned about surface quality of crystallizer’s desks, also from point of view of its quality evaluation.in terms of project solution was solved a crystallizer’s desks defects catalogue and methodology of their evaluation. Also was made methodology for quality evaluation of narrow crystallizer’s desks,

APA, Harvard, Vancouver, ISO, and other styles

11

Alexandru, Petrica, and Bogdan Gabriel Carp. "Determination of Correlation Between Composition, Rolling Parameters and Mechanical Characteristics of the Hot Rolled Steels." Materiale Plastice 56, no. 1 (2019): 224–27. http://dx.doi.org/10.37358/mp.19.1.5156.

Full text

Abstract:

The controlled lamination of thick sheets involves the use of algorithms for choosing the rolling parameters: the initial heating temperature, the lamination scheme (the distribution of the total thickness reduction on each rolling cage, the number of passes through each cage and the distribution of the thickness reduction on each passage, intermediate cooling - cooling time and speed), and the temperature of the product obtained at the end of the rolling. The complexity of the phenomena, which occur during the hot plastic deformation process and which must be sufficiently well mastered in ord

APA, Harvard, Vancouver, ISO, and other styles

12

Sroka, Włodzimierz. "Alliance Networks: the Case of Multinational Corporations." Organizacija 43, no. 4 (2010): 165–72. http://dx.doi.org/10.2478/v10051-010-0016-z.

Full text

Abstract:

Alliance Networks: the Case of Multinational CorporationsThe article deals with the problems of cooperation in network organizations. The structure of the text is divided into a couple of parts. Firstly, the increasing importance of alliance networks is described. Secondly, the concept of alliance networks as well as the essence of multinational corporations are presented. Beside theoretical deliberations, two practical cases are presented in the text too. First case relates to the Toyota keiretsu and the second one describes the network organization of the largest steel manufacturer in the wo

APA, Harvard, Vancouver, ISO, and other styles

13

Mazouz, Radia, Naima Filali, Zhour Hattab, and Kamel Guerfi. "Valorization of granulated slag of Arcelor-Mittal (Algeria) in cationic dye adsorption from aqueous solution: column studies." Journal of Water Reuse and Desalination 6, no. 1 (2015): 204–13. http://dx.doi.org/10.2166/wrd.2015.049.

Full text

Abstract:

A continuous adsorption study in a fixed-bed column was carried out using granulated slag (GS) as an adsorbent for the removal of methylene blue (MB) from aqueous solution. The effects of various parameters, such as initial dye concentration, flow rate, bed depth, and pH were investigated. Obtained results confirmed that the breakthrough time and exhaustion time were dependent on these factors. The adsorption capacity of GS was calculated at the 50% breakthrough point for different conditions. The highest breakthrough capacity (q,exp = 0.296 mg.g–1) was obtained with a 15 cm bed height and a 2

APA, Harvard, Vancouver, ISO, and other styles

14

Alvarez, Eduardo Alvarez, Antonio J. Gutiérrez Trashorras, José Manuel Suárez Cuesta, and Jorge Xiberta Bernat. "Steel mill slags energy potential: the case of the steel factory of Arcelor-Mittal in Asturias (Spain)." Clean Technologies and Environmental Policy 14, no. 5 (2012): 869–77. http://dx.doi.org/10.1007/s10098-012-0455-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Bulikova, L. "Chemical properties of fly ashes produced in the Arcelor Mittal power station and the Třinec ironworks power station." IOP Conference Series: Earth and Environmental Science 92 (October 2017): 012005. http://dx.doi.org/10.1088/1755-1315/92/1/012005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

GobioThomas, Lisa, Moschos Papananias, Mohamed Darwish, and Valentina Stojceska. "The Use of Machine Learning in Predicting Future Environmental Impacts of the ASTEP Solar Thermal System: A Case Study." Proceedings of The World Conference on Climate Change and Global Warming 1, no. 1 (2024): 44–58. http://dx.doi.org/10.33422/ccgconf.v1i1.346.

Full text

Abstract:

An artificial neural network (ANN) model developed in MATLAB was used to predict the environmental performance of an innovative solar thermal system, ASTEP (Application of Solar Energy to Industrial Processes) over a 30-year period. The system was applied to the industrial processes of two end-users, Mandrekas (MAND) and Arcelor Mittal (AMTP). The ASTEP system was designed to supply thermal energy up to 400°C and consist of three main components: a novel rotary Fresnel Sundial, thermal energy storage (TES) and a control system. The actual GHG emissions of the ASTEP system and a solar thermal p

APA, Harvard, Vancouver, ISO, and other styles

17

Bakishev, Temirlan, Rakhimtay Tleulesov, Zhanar Bakisheva та Zhenisgul Asauova. "STUDY OF THE INFLUENCE OF ENVIRONMENTAL FACTORS ON THE QUALITY OF BEEF AND MILK IN THE FARMHOUSES OF KARAGANDА OBLAST". 3i intellect idea innovation - интеллект идея инновация 4 (2023): 10–22. http://dx.doi.org/10.52269/22266070_2023_4_10.

Full text

Abstract:

In the article, the authors present the results of assessing the quality and safety of milk and beef meat in various districts of the Karaganda region. The following studies were carried out: organoleptic and physico-chemical indicators; the total toxicity and residual amount of heavy metal compounds were determined; the quality and safety of livestock products from various areas of the study area were assessed; organoleptic and physico–chemical indicators of milk and beef meat were carried out; the dynamics of seasonal accumulation of residual amounts of heavy metal compounds in milk and beef

APA, Harvard, Vancouver, ISO, and other styles

18

Dauwels, G., S. Clairay, E. Hess, J. Janz, and J. L. Eymond. "Stable and efficient blast furnace operation with high PCI and low coke rate at Arcelor Mittal Flat Carbon W-Europe." Revue de Métallurgie 104, no. 5 (2007): 221–30. http://dx.doi.org/10.1051/metal:2007124.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Fernandez, Jose Ramon, Monica Alonso, Alberto Mendez, et al. "Decarbonization of Blast Furnace Gases Using a Packed Bed of Ca-Cu Solids in a New TRL7 Pilot." Energies 18, no. 3 (2025): 675. https://doi.org/10.3390/en18030675.

Full text

Abstract:

This work outlines the commissioning and initial experiments from a new pilot plant at Arcelor Mittal Gas Lab (Asturias, Spain) designed to decarbonize up to 300 Nm3/h of blast furnace gas (BFG). This investigation intends to demonstrate for the first time at TRL7 the calcium-assisted steel-mill off-gas hydrogen (CASOH) process to decarbonize blast furnace gases. The CASOH process is carried out in packed-bed reactors operating through three main reaction stages: (1) H2 production via the water–gas shift (WGS) of the CO present in the BFG assisted by the simultaneous carbonation of CaO; (2) ox

APA, Harvard, Vancouver, ISO, and other styles

20

Тлеулесов, Рахимтай, Бакишев Т.Г., Бакишева Ж.С., and Нургалиев Б. Е. "INFLUENCE OF THE FACTORS OF ENVIRONMENT ON THE QUALITY OF THE FEED IN THE KARAGANDA OBLAST." Ġylym ža̋ne bìlìm 2, no. 2 (71) (2023): 154–61. http://dx.doi.org/10.52578/2305-9397-2023-2-2-154-161.

Full text

Abstract:

In the article, the authors present the results of assessing the quality and safety of feed in various districts of the Karaganda region. The following feed studies were carried out: organoleptic and physico-chemical indicators; the total toxicity and residual amount of heavy metal compounds were determined; the quality and safety of feed from various areas of the study area were assessed; organoleptic and physico–chemical indicators of animal feed were carried out; the dynamics of seasonal accumulation of residual amounts of heavy metal compounds in feed was also established. The follow

APA, Harvard, Vancouver, ISO, and other styles

21

Leonardi, Emanuele. "Esperienza operaia dell'ecologia e ambientalismo del lavoro all'Italsider/Ilva di Taranto. Dagli anni Cinquanta al 2018." SOCIOLOGIA DEL LAVORO, no. 165 (May 2023): 155–77. http://dx.doi.org/10.3280/sl2023-165008.

Full text

Abstract:

L'articolo esplora il rapporto contraddittorio tra esperienza operaia dell'ecologia e ambientalismo del lavoro nel caso studio dell'Italsider/(ex)Ilva di Taranto, sulla base metodologica dell'etnografia sociale. La tesi di fondo è che una nuova analisi – qualitativa e storiograficamente solida – di tale, complessa relazione renda possibile da un lato destrutturare l'opposizione, apparentemente naturale, tra occupazione e salute, e dall'altro aprire scenari inediti per lo sviluppo di un diverso punto di vista del lavoro sulla crisi ecologica. La struttura dell'articolo è la seguente: il primo p

APA, Harvard, Vancouver, ISO, and other styles

22

García Serna, Jesús Rafael, and Patricia Calderón Campos. "Los sistemas ERP factor del éxito de las organizaciones." Multidisciplinas de la Ingeniería 2, no. 02 (2023): 254–61. http://dx.doi.org/10.29105/mdi.v2i02.68.

Full text

Abstract:

A través de una investigación explorativa, documental y de campo, sobre este tipo de aplicación, así como de las empresas que cuentan con esta tecnología en la Lázaro Cárdenas y en particular en Arcelor Mittal-México, se obtuvo que la mejor tecnología que existe para la administración de negocios, así como el uso de las mejores prácticas es la utilización de sistemas ERP a fin de hacer frente a la competencia y a la globalización por las facilidades que permite en todo tipos de escenarios de operación de modelos de negocio. Con este tipo de tecnologías permiten obtener la información “on-line”

APA, Harvard, Vancouver, ISO, and other styles

23

MOSCOVICI, Anca Maria, Alina Corina BALA, Floarea Maria BREBU, Clara Beatrice VILCEANU, and Cosmin Ion CZEGU. "Monitoring of Buituri Slag Dump, Hunedoara County in Relation with Environmental Protection." Bulletin of University of Agricultural Sciences and Veterinary Medicine Cluj-Napoca. Horticulture 74, no. 1 (2017): 110. http://dx.doi.org/10.15835/buasvmcn-hort:12300.

Full text

Abstract:

Detailed analysis of appearance and relief evolution in mining areas cannot be done without mining engineering concepts. Over time, researchers around the world have responsibly been involved in this matter necessary for the development of society, also with obvious implications and repercussions over the quality of life. The purpose of the scientific research detailed in this paper comprises in monitoring the slag dump from Buituri, Hunedoara County using space geodetic technology. Slag dump is the result of steel production activities carried out under the steel factory Arcelor Mittal Hunedo

APA, Harvard, Vancouver, ISO, and other styles

24

Oliveira, Aylson Costa, Angélica de Cássia Oliveira Carneiro, Daniel Camara Barcellos, Augusto Valencia Rodriguez, Bartholomeu Machado Nogueira Amaral, and Bárbara Luísa Corradi Pereira. "RESFRIAMENTO ARTIFICIAL EM FORNOS RETANGULARES PARA A PRODUÇÃO DE CARVÃO VEGETAL." Revista Árvore 39, no. 4 (2015): 769–78. http://dx.doi.org/10.1590/0100-67622015000400020.

Full text

Abstract:

RESUMOUm importante aspecto a ser considerado na produção de carvão vegetal é o longo período de resfriamento dos fornos de alvenaria, acarretando na baixa produtividade e exigindo maior número de fornos para suprir a demanda de produção. Pesquisas têm sido desenvolvidas para a redução do tempo de resfriamento dos fornos retangulares, utilizando trocadores de calor. Dessa forma, o objetivo deste trabalho foi avaliar três modelos de trocadores de calor que promovam a redução significativa do tempo de resfriamento. A pesquisa foi realizada na unidade produtora de carvão vegetal Buritis, da Empre

APA, Harvard, Vancouver, ISO, and other styles

25

Mioche, Philippe, and Eric Godelier. "L’acier et la sidérurgie française, vus par l’histoire économique." Matériaux & Techniques 111, no. 3 (2023): 306. http://dx.doi.org/10.1051/mattech/2023024.

Full text

Abstract:

Ce texte présente deux visions complémentaires de la sidérurgie en France, du XIXe siècle à nos jours, au travers de deux approches, l’une d’économie historique et l’autre d’histoire des entreprises. La première partie rappelle comment le secteur a évolué sur cette longue période et quels ont été les moteurs du changement historique et les acteurs. C’est la nature des ressources énergétiques et minières, qui a piloté les transformations. Depuis l’arrivée (l’invention) à la fin du 19e siècle des procédés de production d’acier liquide (procédés Martin et Bessemer), la sidérurgie a quitté les for

APA, Harvard, Vancouver, ISO, and other styles

26

Battakova, Kamila, Aigerim Sansyzbayeva, and Oleg Ostanin. "Geographical aspects of the correlation between the morbidity of the population and the state of environmental objects in the Karaganda region." Journal of Geography and Environmental Management 73, no. 2 (2024): 112–32. http://dx.doi.org/10.26577/jgem.2024.v73.i2-09.

Full text

Abstract:

This article examines the content of heavy metals in the soil, the characteristics of surface reservoirs, the level of emissions of pollutants into the atmospheric air in urban and rural areas of the Karaganda region. The results of studying the peculiarities of morbidity of the population by classes of diseases living in various microclimatic conditions for 2011-2021 are considered. Correlation analysis revealed statistically significant positive reliable links between the level of lead in the soil and diseases of the blood, hematopoietic organs and individual disorders involving the immune m

APA, Harvard, Vancouver, ISO, and other styles

27

Kulbayev, Begman, Vladimir Lapin, Alexandr Shakhnovich, et al. "Strength and Deformability of Structural Steel for Use in Construction." Civil Engineering Journal 10, no. 3 (2024): 796–807. http://dx.doi.org/10.28991/cej-2024-010-03-09.

Full text

Abstract:

The purpose of the study is an experimental determination of the stress-related characteristics of the structural steel produced in the Republic of Kazakhstan for use in conventional and earthquake-resistive construction. Since 2015, the construction industry has been using European regulatory documents—Eurocodes—as a statutory framework. In particular, the Eurocode 1993 for steel structures and the Eurocode 1998 for the design of earthquake-resistant structures However, the study of stress-related properties of structural steel using experimental methods of ISO standards has not been performe

APA, Harvard, Vancouver, ISO, and other styles

28

حطاب, دلال, та نور الدين زعيبط. "تقييم الأداء المالي باستخدام نسب النقدية المشتقة من جدول تدفقات الخرينة : دراسة حالة مؤسسة أرسيلور ميتال عنابة (مركب الحديد والصلب) (2012 - 2013 - 2014) = Evaluation of Financial Performance Using Cash Rates Derived from the Treasury Flow Table : Case Study of Arcelor Mittal Annaba (Iron and Steel) (2012 - 2013 - 2014)". Journal of Economic and Financial Research 4, № 1 (2017): 337–57. http://dx.doi.org/10.12816/0050890.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

"HP MAGNET STEEL." Alloy Digest 68, no. 6 (2019). http://dx.doi.org/10.31399/asm.ad.sa0847.

Full text

Abstract:

Abstract Arcelor Mittal HP magnet plate was developed for use as large fabricated DC magnets. This datasheet provides information on composition, tensile properties, and shear strength. It also includes information on heat treating, machining, and joining. Filing Code: SA-847. Producer or source: ArcelorMittal USA.

APA, Harvard, Vancouver, ISO, and other styles

30

Godelier, Ã‰ric. "La naissance d'un gÃ©ant: Arcelor-Mittal (1948-2006)." French Politics, Culture & Society 26, no. 2 (2008). http://dx.doi.org/10.3167/fpcs.2008.260206.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Bastos, Suzana Quinet de Andrade, Lourival Batista De Oliveira Júnior, and Rogério Silva Mattos. "implantação da siderúrgica mendes júnior em juiz de fora (MG)." História Econômica & História de Empresas 12, no. 2 (2012). http://dx.doi.org/10.29182/hehe.v12i2.97.

Full text

Abstract:

A empresa Siderúrgica Mendes Júnior, atualmente, Arcelor-Mittal Juiz de Fora — Aços Longos, foi implantada na cidade de Juiz de Fora, Minas Gerais, ao longo dos anos 1970, tendo, porém, iniciado sua operação em 1984. Embora de iniciativa privada, o projeto industrial da empresa foi concebido e implementado com elevada interferência pública, tanto da esfera federal, quanto da estadual e da municipal. Além de conceder financiamentos e isenção de impostos, o Estado brasileiro influenciou na concepção dos processos produtivos e na decorrente definição da capacidade de produção da empresa.

APA, Harvard, Vancouver, ISO, and other styles

32

"Arcelor Mittal announces partnership for a seamless tube mill in Saudi Arabia." Anti-Corrosion Methods and Materials 54, no. 3 (2007). http://dx.doi.org/10.1108/acmm.2007.12854cab.015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Bourzama, G., H. Ouled-Haddar, M. Marrouche, and A. Aliouat. "Iron Uptake by Fungi Isolated from Arcelor Mittal -Annaba- in the Northeast of Algeria." Brazilian Journal of Poultry Science 23, no. 1 (2021). http://dx.doi.org/10.1590/1806-9061-2020-1321.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

"TATA CORUS DEAL A WIN-WIN SITUATION." International Journal for Research in Engineering Application & Management, June 30, 2020, 74–79. http://dx.doi.org/10.35291/2454-9150.2020.0442.

Full text

Abstract:

Since the start of the 21st century, acquisitions have become an elite pattern in the worldwide steel industry. This is clearly evident from the inexorably developing number of deals through mergers & acquisitions coming about with increasingly corporate combination particularly with existing endeavor of extreme globalization. Indian steel organizations have developed among the biggest steel makers on the planet by keeping their impression in worldwide steel map. Some Indian organizations like Mittal steel, Tata steel, have made noteworthy abroad acquisitions including Arcelor by Mittal, a

APA, Harvard, Vancouver, ISO, and other styles

35

Bušatlić, Nadira, Ilhan Bušatlić, Nevzet Merdić, Nedžad Haračić, and Lamija Mujkanović. "TECHNOGENIC WASTE AS A NEW INORGANIC BINDER." Metallurgical & Materials Engineering Congress of South-East Europe 6, no. 1 (2025). https://doi.org/10.30544/mmesee83.

Full text

Abstract:

Every year 9.2 billion tonnes of industrial waste are generated worldwide. This is waste from industrial manufacturing processes that’s often a by-product with no further use.In addition to occupying huge areas for disposal of construction waste, this waste pollutes land, water and air. Responsible industrial waste management is vital to reduce such risks. The paper presents the possibility of utilizing construction waste to produce a binding material that could be used instead of cement. In this paper, the mechanical properties of geopolymer based on fly ash from the "Stanari" thermal power p

APA, Harvard, Vancouver, ISO, and other styles

36

Kargin, J., L. De Los Santos Valladares, L. E. Borja-Castro, et al. "Characterization of iron oxide waste scales obtained by rolling mill steel industry." Hyperfine Interactions 243, no. 1 (2022). http://dx.doi.org/10.1007/s10751-022-01800-7.

Full text

Abstract:

AbstractEvery year, the steelmaking industry produces millions of tons of slags resulting in pollution to the environment. Among the waste, secondary metals and scales rich in iron oxides are also thrown away. There is a need to treat the steel waste in a reasonably way to protect the environment and proposing new cheap technologies for producing advanced materials. In this study we report the morphological and structural characterization of waste scales generated during roll milling steel process at JSC “Arcelor Mittal Temirtau”. The raw slag and annealed at 1000 °C were measured by X-ray dif

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!