Relevant bibliographies by topics / Arduino Nano Microcontroller (ATMEGA 328P)

Contents

  1. Journal articles
  2. Book chapters
  3. Conference papers

Academic literature on the topic 'Arduino Nano Microcontroller (ATMEGA 328P)'

Author: Grafiati
Published: 5 June 2025
Last updated: 8 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Arduino Nano Microcontroller (ATMEGA 328P).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Arduino Nano Microcontroller (ATMEGA 328P)"

1

Ghulomzoda, Anvari, Mukhammadjon Odinabekov, Shokhrukh Sidikov, Akbar Ghulomov, and Karomatullo Makhmudov. "Experimental Study of the Applicability of Simple Microcontrollers for Implementing the Microgrid Decentralized Synchronization Method in the Electrical Network." Journal of Modern Energy Research 2, no. 2 (2024): 20–26. https://doi.org/10.56947/jmer.v2i2.14.

Full text
Abstract:
Currently, on the basis of local power supply systems with small distributed generation, active networks called Microgrid are formed. Such networks can be adapted to work both independently and in parallel with the external network. In such networks, it is difficult to synchronize sources. The purpose of this paper is to study the features of implementing the Microgrid decentralized synchronization method on simple controllers and assess the sufficiency of their technical capabilities. Atmega 328P – Arduino NANO and UNO were used as microcontrollers.
APA, Harvard, Vancouver, ISO, and other styles
2

Olowosebioba, AA, AD Folorunsho, BA Akindele, et al. "Design and construction of solar-powered smart garbage disposal unit." Annals of Civil and Environmental Engineering 7, no. 1 (2023): 024–29. http://dx.doi.org/10.29328/journal.acee.1001052.

Full text
Abstract:
Cities with developing economies experience exhausted waste collection services, and inadequately managed and uncontrolled dumpsites; which is an ongoing challenge and many struggles due to weak institutions and rapid urbanization. The purpose of the research is to design and construct a smart garbage disposal system using a two-way power supply unit (that is, the electrical power supply unit and solar power supply unit) based on Arduino Nano that utilizes ATMEGA 328p microcontroller. Two pairs of ultrasonic sensors, the pair that faced upward detects the presence of garbage disposal agent at a close distance of (5 - 50) cm and then opens the lid while the other pair faced the inside of the container senses when the container is filled up and then closes the container until it is emptied are used.
APA, Harvard, Vancouver, ISO, and other styles
3

Isah, Abdulazeez Watson, Kadijhatu Quincy Jimah, and Abdulai Braimah Oshomah. "Design and Implementation of a Wi-Fi- based Ceiling Fan Regulator System." Greener Journal of Science, Engineering and Technological Research 9, no. 2 (2019): 24–28. https://doi.org/10.5281/zenodo.3473277.

Full text
Abstract:
<strong>This paper presents the Design and Implementation of Wi-Fi- based Ceiling Fan Regulator System using Arduino Nano board and an ESP8266 Wi-Fi Module. It is born out of the need to provide a flexible and convenient means of regulating the speed of a ceiling fan without resorting to the manual means of doing same. The components used are: An Arduino Nano board featuring an Atmega 328p Microcontroller, an Esp8266 Wi-Fi Module, a coil inside an old manual fan regulator, a relay board comprising of four relays, a 3.3V regulated power supply unit and connecting leads. The appropriate drivers were installed for the boards while the necessary libraries were included on to codes written using the Arduino Integrated Development Environment (IDE). The 5V power supply from the Arduino board was taken on to the power board for regulation using the LM 1117 voltage regulator. The RST terminal of the Arduino board and the GPIO0 of the ESP8266 module were connected to GRD. The codes were uploaded on to the flash memory of the Wi-Fi module. Any Wi-Fi device can be used to select the speed of the ceiling fan through an interface designed using html language. The system proved very efficient and reliable for both office and domestic use within the required range of 40 - 300 feet.</strong>
APA, Harvard, Vancouver, ISO, and other styles
4

Nyiekaa, E.A., C.A. Francis, and K.J. Ukor. "Design and Construction of an Automatic Temperature Control System." Journal of Scientific and Engineering Research 8, no. 6 (2021): 84–91. https://doi.org/10.5281/zenodo.10603931.

Full text
Abstract:
<strong>Abstract</strong> This paper presents the design and construction of a temperature controller system that is capable of maintaining an enclosed area temperature to a desired value. A microcontroller and a temperature sensor are used to control and monitor temperature. LM35 temperature sensor is used to sense temperature and it works linearly with increase in temperature. The microcontroller compares the increase or decrease in temperature with the room or set temperature and passes the information to either the cooling fan or the heater to activate or deactivate accordingly. The set temperature in this design is between 25<sup>0</sup>C and 26<sup>0</sup>C. When the surrounding temperature goes below 25<sup>0</sup>Cthe temperature sensor sends signal to the microcontroller (Atmega 328p) which analyses it by comparing it with the set temperature and then latch the transistor to switch ON the heater. But if the surrounding temperature goes beyond 26<sup>0</sup>C, the temperature sensor detects the temperature change and sends an information to the microcontroller to signal the relay through the transistor to switch ON the fan and automatically puts OFF the heater. The designed system incorporated a buzzer such that it comes ON to alert nearby people in case the temperature goes beyond 37 &nbsp;and the fan fails to cool the environment. The results obtained from laboratory setup agree with that of simulation using proteus software<em>.</em>
APA, Harvard, Vancouver, ISO, and other styles
5

Hadi Wirdyanto, Septian. "Cooling System for Field Service Clothes Pt. Pln Persero based on Arduino Nano." JEEE-U (Journal of Electrical and Electronic Engineering UMSIDA 4, no. 2 (2020): 121–30. http://dx.doi.org/10.21070/jeeeu.v4i2.828.

Full text
Abstract:
Work clothing is a type of clothing that is used specifically by a company or agency to perform a job for the benefit of the company. One of them is the work clothes worn by the substation and transmission maintenance team of PT. PLN (PERSERO). In the design and uniform provisions for transmission substation maintenance teams have been regulated in the Regulation of the Minister of Manpower and Transmigration of the Republic of Indonesia Number Per.08 / Men / Vii / 2010 concerning Personal Protective Equipment. The whole body must be covered by work clothes, SNI standard worker helmets, gloves and shoes. The entire body of the maintenance team must be protected to create security in carrying out the work of securing the area around the substation and transmission tower. In carrying out the work of substation and transmission maintenance teams are often exposed to direct sunlight. So that the maintenance team often feels stifling when working in a high enough ambient temperature, coupled with the uniform covering the whole body causes discomfort to the substation maintenance team and transmission due to excessive sweating. Meanwhile, work clothes that cover the whole body are an obligation for the safety of workers. From this research, the results of the cooling system for the field service for the maintenance team of PT. PLN PERSERO Based on Arduino Nano. The system design in the program uses the C programming language with Arduino software.The idea is to execute the design system, using the ATMega 328p microcontroller as a design control system with a DHT 11 sensor as a temperature sensor which will then activate the cooling fan as a cooling system and the buzzer as an indicator of high working environment temperature. Design system performance supported by 18650 battery power source.
APA, Harvard, Vancouver, ISO, and other styles
6

Rizki Lubis, Azmi, A. Antoni, Bonar Harahap, Gunawan Tarigan, and Jupriah Sarifah. "Harmonic Meter Design Using Arduino." International Journal of Engineering & Technology 7, no. 2.13 (2018): 381. http://dx.doi.org/10.14419/ijet.v7i2.13.16925.

Full text
Abstract:
This paper discusses the measurement of harmonic content using arduino which is simulated with proteus software. The components used in this meter harmonic circuit are resistor, capacitor, LCD, microcontroller atmega 328P. Microcontroller works based on voltage source (TR1) and current source (TR2) on proteus software. The voltage and current delivered to the microcontroller will be read and executed according to the program on the microcontroller. The program used in this arduino microcontroller is the C language program. The results obtained from this study Arduino successfully measure the harmonic content and display the measurement results on the LCD.
APA, Harvard, Vancouver, ISO, and other styles
7

Wibawa, I. Made Satriya, and I. Ketut Putra. "Design of air temperature and humidity measurement based on Arduino ATmega 328P with DHT22 sensor." International journal of physical sciences and engineering 6, no. 1 (2022): 9–17. http://dx.doi.org/10.53730/ijpse.v6n1.3065.

Full text
Abstract:
The Arduino ATmega 328P-based temperature and humidity measuring instrument have been successfully designed. The ATmega 328P microcontroller functions to process data which is the output of the DHT22 sensor which receives data signals in the form of temperature and humidity. The results detected by the design of this tool are displayed on the LCD keypad shield. The calibration process for the design tool was carried out at the BMKG Sanglah Denpasar. The results of the calibration of the design tool with reference tools at BMKG show a good level of accuracy, namely 97.97% for air temperature and 99.35% for air humidity.
APA, Harvard, Vancouver, ISO, and other styles
8

Jaya, Indra, and Di Ikhwal. "Perancangan Alat Pengaduk Magnetik Berbasis Arduino Uno Atmega 328p." Circuit: Jurnal Ilmiah Pendidikan Teknik Elektro 7, no. 1 (2023): 69. http://dx.doi.org/10.22373/crc.v7i1.14915.

Full text
Abstract:
To stir and homogenize chemical solutions and other liquid substances, a magnetic stirrer is required. This study aims to create a magnetic stirrer device with three speed levels based on the Arduino Uno microcontroller. This stirrer tool is made up of a DC motor, a Microcontroller with the IC ATmega 328P, a speed control circuit, a buzzer, and an LCD display. The IC controller will initialize commands to the LCD circuit and the speed control circuit when the device is turned on, according to the tool's working principle. When the set timer button is pressed, the speed set menu appears; on the speed set menu, press the high, low, and normal buttons to select the speed.The motor's speed is controlled using the PWM principle, which involves setting the duty cycle to 25% (Low) for low speeds where the voltage supply to the DC motor is 1.25 volts, 60% for medium speed (Normal) where the voltage supply is 3 volts, and 100% for high speed (High) where the voltage supply is 5 volts. Then press the Start button to begin stirring. If the motor is turned on, the tool will run for a predetermined time ranging from 1 to 15 minutes. Then, press the required speed start button. Then, press the start button to begin stirring; if the motor runs, the stirrer tool will run for the duration specified. To determine the speed of a DC motor at low speeds. Low speed DC motor speed measurements yielded a speed of 2673 rpm, normal speed yielded a speed of 3294 rpm, and high speed yielded a speed of 4438 rpm. The buzzer will sound when the stirring process is complete.
APA, Harvard, Vancouver, ISO, and other styles
9

Dahlan, Feri Prayogi, and Indra Roza. "RANCANGAN SISTEM RUMAH PINTAR TYPE 45 MENGGUNAKAN MIKROKONTROLLER ATMEGA328P BERBASIS APLIKASI ANDROID." JiTEKH 9, no. 1 (2021): 20–28. http://dx.doi.org/10.35447/jitekh.v9i1.324.

Full text
Abstract:
Remote control is not something new, so the development of remote control has been done in many applications. The author designed automatic control of equipment and devices at home and buildings from a distance. The microcontroller used in this study was the ATmega 328P AVR type (Alf and Vegaard's Risc). ATmega 328P is an external microcontroller from atmel that has a RISC (Reduce Instruction Set Computer) architecture where each data execution process is faster than the CISC (Completed Intruction Set Computer) architecture. In the research, the application of access to devices in the home such as light control, fans and servo motors as a door driver using Arduino UNO as a microcontroller and Android applications as the main controller to control electronic devices. The circuit work system with a voltage of 3.3V to 5V, then each device in the circuit will be active (ArduinoUno, Bluetooth HC05 and Relay Module) with a 12V voltage on each tool. HC-05 As a connection with a maximum distance of 12M the tools can work. Based on the test results, it is obtained that the control system based on the android application using Arduino can be used as a controller for lights, fans and doors properly.
APA, Harvard, Vancouver, ISO, and other styles
10

Rohan, Gour, Ghosekar Ramchandra, Raut Biju, Khobragade Kashayap, gajhbiye Taniya, and Warambhe N. "Automatic Solar Tracking System." Journal of Recent Trends in Electrical Power System 3, no. 1 (2020): 1–3. https://doi.org/10.5281/zenodo.3834043.

Full text
Abstract:
<em>&ldquo;Automatic Solar Tracking System&rdquo; is a system in which the system will preserve the full energy of sun and converts it into electrical energy. The system will track the position of sun according to the intensity of light, and the sensors will operate the panel with the help of dc motors and the whole system will be controlled by arduino microcontroller atmega 328p.</em>
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Arduino Nano Microcontroller (ATMEGA 328P)"

1

Ganguly, Amrita, and Bijan Paul. "Tiny Blind Assistive Humanoid Robot." In Collaborative Robots [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.97333.

Full text
Abstract:
In today’s world, individuals show more enthusiasm for robotics and aim to depend upon humanoid robots for multiple purposes. It has implementations in a wide range of sectors such as- in atomic plants, house management, government foundations and even astro stations. Our research-based project is elucidating robotics with a tiny humanoid robot following the human structure to make gestures like strolling, dancing, and detecting objects near it. It has been achieved using Arduino Nano (Atmega 328P), Servo motors SG90 working on the conception of servomechanism and the Ultrasonic sensor to identify obstacles and restrain the Robot from going ahead. The aim is to fabricate a bigger humanoid robot that will serve our general public and make our life simpler. The Robot has eventual utilize in marketing, entertainment and helping the visually impaired to move from one place to another. This project can also be a great apparatus for future research works and alteration.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Arduino Nano Microcontroller (ATMEGA 328P)"

1

Dewi, Candra, Millati Azka, Hartono Hartono, and Supriyadi Supriyadi. "Development of Kinetic Friction Coefficient Experiment Tools Based on Arduino Nano ATmega 328P LDR Sensor." In Proceedings of the 5th International Conference on Science, Education and Technology, ISET 2019, 29th June 2019, Semarang, Central Java, Indonesia. EAI, 2020. http://dx.doi.org/10.4108/eai.29-6-2019.2290504.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Arduino Nano Microcontroller (ATMEGA 328P)' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography