Academic literature on the topic 'Arduino UNO NANO'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Arduino UNO NANO.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Arduino UNO NANO"

1

PAPANAGIOTOU, ZOGRAFIA, ARISTOTELIS GKIOLMAS, TRIANTAFYLLIA ALEXANDRA PAPANAGIOTOU, ANTHIMOS CHALKIDIS, GIANNA KATSIAMPOURA, and KONSTANTINOS SKORDOULIS. "Measurements with Arduino Uno and Arduino Nano BLE Setups: Research Findings with Primary School Students." INTERNATIONAL JOURNAL OF EDUCATIONAL INNOVATION 6, no. 5 (2024): 13–20. https://doi.org/10.69685/kcak2275.

Full text
Abstract:
This study analyzes the results of a teaching intervention and the accompanying research related to solar radiation and temperature. The measurement of these parameters is conducted using educational robotic setups based on Arduino Nano BLE and Arduino Uno. The research sample consists of students from the upper grades of primary school, specifically sixth-grade students. After a brief presentation of the components that make up the radiation measurement setups, a four-lesson instructional sequence takes place. Initially, a class discussion is conducted to explore the concepts of temperature a
APA, Harvard, Vancouver, ISO, and other styles
2

А.В., Быкова. "ПЕРЕДАЧА ДИНАМИЧЕСКИХ ПОКАЗАТЕЛЕЙ С ЦИФРОВЫХ ДАТЧИКОВ ЧЕРЕЗ КОНТРОЛЛЕР ARDUINO NANO НА КОНТРОЛЛЕР ARDUINO UNO". ИННОВАЦИОННЫЕ НАУЧНЫЕ ИССЛЕДОВАНИЯ 6-3(8) (26 вересня 2021): 263–68. https://doi.org/10.5281/zenodo.5529127.

Full text
Abstract:
В статье рассматривается как происходит обмен данными между двумя контроллерами, соединенными через интерфейс I2C. В контроллерах Arduino интерфейс представляет из себя последовательную асимметричную шину, способную подключить до 127 устройств. В представленном примере рассматривается связка двух контроллеров Arduino NANO и Arduino UNO, осуществляющих обмен данными, полученными с датчика температуры и влажности DHT22. Данный тип связи может быть использован для передачи не только плавающих показателей с датчиков, но и для отправки команд на множество подчинённых контроллеров.
APA, Harvard, Vancouver, ISO, and other styles
3

Arifin, Arham, Sitti Harlina, and Akbar Bahtiar. "Rancang Bangun Jam Weker Portable Untuk Tunarungu Tanpa Gelombang Elektromagnetik Berbasis Arduino Nano." Jurnal Minfo Polgan 13, no. 2 (2024): 1906–14. https://doi.org/10.33395/jmp.v13i2.14123.

Full text
Abstract:
Penelitian ini bertujuan untuk mengatasi keterbatasan yang dihadapi oleh penyandang disabilitas tunarungu dalam hal bangun tidur dengan mengembangkan alat jam alarm getar yang lebih efektif. Penelitian sebelumnya telah berhasil merancang sebuah sistem menggunakan Arduino Uno dengan vibration motor sebagai sistem getar dan menampilkan waktu pada Liquid Crystal Display. Namun, untuk meningkatkan fleksibilitas dan efisiensi dari alat ini, penelitian selanjutnya akan mengusulkan penggantian komponen utama, yaitu penggunaan Arduino Nano dan OLED Display. Penggunaan Arduino Nano sebagai pengganti Ar
APA, Harvard, Vancouver, ISO, and other styles
4

Фозилжонов, Хожиакбар, та Сайёра Азизова. "Сравнительный анализ плат Arduino: характеристики, преимущества и применение". InterConf, № 44(197) (19 квітня 2024): 478–84. http://dx.doi.org/10.51582/interconf.19-20.04.2024.048.

Full text
Abstract:
Данный обзор рассматривает различные модели плат Arduino, широко используемых в электронике, робототехнике, IoT и многих других областях. В статье представлено подробное описание основных характеристик и возможностей каждой модели платы Arduino, включая Arduino Uno, Nano, Mega, Micro, Due, Leonardo, и другие. Также рассмотрены проекты, которые можно реализовать на каждой из этих плат, а также преимущества и ограничения каждой модели.
APA, Harvard, Vancouver, ISO, and other styles
5

Das, Sarah. "Digital Garbage System using Arduino NANO." International Journal for Research in Applied Science and Engineering Technology 9, no. 8 (2021): 2967–71. http://dx.doi.org/10.22214/ijraset.2021.37880.

Full text
Abstract:
Abstract: Garbage bins or dust bins are those that are put in public places in cities and are currently overflowing due to an increase in waste every day. It harms people's health by spreading deadly infections. To avoid this, smart bins will be designed with sensors such as an infrared sensor, a weight sensor, a photoelectric sensor, and radio frequency identification (RFID) card reader. If someone throws trash into the smart bins, a photoelectric sensor will identify the clear representation objects, and a weight sensor will be positioned beneath the smart bin to calculate the percentage of
APA, Harvard, Vancouver, ISO, and other styles
6

Muawan Bisri, Okto Kurnia, and Arif Maulana. "Rancang Bangun Sistem Alarm Pintu Gudang Berbasis Arduino di PT. Sakai Indonesia Bekasi." Jurnal Publikasi Teknik Informatika 4, no. 2 (2025): 10–20. https://doi.org/10.55606/jupti.v4i2.4051.

Full text
Abstract:
The development of technology is currently increasingly rapid in the industrial world, especially in each department there are many tools and spare parts that are very important for company assets, therefore the author designed a warehouse door alarm system to reduce the risk of losing tools and spare parts that aim to protect company assets. In the industrial world, especially at PT. Sakai Indonesia for the doors of each department's room still uses components and types of doors in general, so in this study the author designed a door alarm system tool based on the Arduino Uno microcontroller
APA, Harvard, Vancouver, ISO, and other styles
7

Imron, Imron, Bagus Satria, and Nuraini Nuraini. "THE DESIGN OF PEOPLE FOLLOWER ROBOT TO TRANSPORT HARVESTS USING YOLO V5 DETECTION." SemanTIK : Teknik Informasi 9, no. 2 (2023): 173. http://dx.doi.org/10.55679/semantik.v9i2.45261.

Full text
Abstract:
Robots transporting harvested products is commonly use automatic navigation systems with sensors such as lidar, cameras and ultrasonic proximity sensors are important for detecting obstacles and avoiding collisions. Mapping and positioning algorithm are crucial for precise the robot determine position in the field. A dependable drive system, adaptable to diverse terrains, and a robust motor are essential components. Efficient energy requirements must be addressed by using long-lasting battery systems and, where possible, automatic charging solutions. Robots picking mechanisms that can adapt to
APA, Harvard, Vancouver, ISO, and other styles
8

Mhatre, Ms Janhavi. "Real Time Gesture Controlled Robotic Vehicle." International Journal for Research in Applied Science and Engineering Technology 12, no. 3 (2024): 2286–89. http://dx.doi.org/10.22214/ijraset.2024.59320.

Full text
Abstract:
Abstract: The complexity of controlling an automobile increases with the incorporation of more significant capabilities. Planning automobile-controlling frameworks that enable users to teach the car only to demonstrate whatit should do is the focus of numerous research efforts; yet, for non- expert users, using a switch or remote to operatethe car is difficult. In light of this, this paper proposes an Arduino-based automobile-controlling framework that eliminates the need for physical car control. This work exhibits two main commitments. First, we demonstrate thathand gestures maybe used to dr
APA, Harvard, Vancouver, ISO, and other styles
9

Nur, Rachmad Ramadhan, Saragih Yuliarman, and Andika Kurniawan3 Fery. "Rancang Bangun Alat Bantu Jalan Sebagai Pendukung Aktifitas Penyandang Tunanetra Berbasis Mikrokontroler Atmega 328." MADANI: Jurnal Ilmiah Multidisiplin 1, no. 1 (2023): 149–55. https://doi.org/10.5281/zenodo.7885286.

Full text
Abstract:
Hingga saat ini alat bantu jalan bagi penyandang tunanetra masih memiliki kekurangan, sehingga perlu dikembangkan teknologi yang dapat membantu mereka berjalan. Tujuan dari penelitian ini adalah untuk menghasilkan walker dengan sensor mobilitas kiri dan kanan serta menguji akurasi, presisi dan tingkat keberhasilan alat tersebut. Proses penelitian dilanjutkan dalam dua tahap, yaitu. pembuatan alat dan alat pengujian. Alat ini terdiri dari sensor ultrasonik HC-SR04, Arduino uno, Arduino nano, motor servo SG90, buzzer dan mini vibration motor. Hasil penelitian rancang bangun alat bantu jalan untu
APA, Harvard, Vancouver, ISO, and other styles
10

Singh, Raj, Sanjeev Gupta, Jeetesh ., Sahil Singh, and Abhishek Yadav. "Sensor Based Wheelchair by Speech Recognition." International Journal for Research in Applied Science and Engineering Technology 10, no. 5 (2022): 3606–12. http://dx.doi.org/10.22214/ijraset.2022.43160.

Full text
Abstract:
Abstract: According to research there are about 6 million populations in the world who are paralyzed and needs a wheelchair for their mobility. Earlier the wheelchairs had to be moved and be externally supported by any person. To help overcome this “joystick-controlled wheelchairs” are developed. But in regular use, these joystick-controlled wheelchairs became difficult to use. Especially in the case of paralyzed people, the use of joystick became more difficult due to the hard buttons and unidirectional use of the joysticks. To overcome these problems, we’ve tried to develop a “gesture-contro
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Arduino UNO NANO"

1

Cruz, Edisson, Norman Beltrán, and Reynaldo Condori. Diseño e implementación de un sistema de monitoreo y adquisición de datos de parámetros eléctricos y ambientales de un sistema fotovoltaico conectado a la red de 3kW. Instituto Universitario de Innovación Ciencia y Tecnología Inudi Perú, 2022. http://dx.doi.org/10.35622/inudi.b.003.

Full text
Abstract:
En el presente trabajo de investigación se realizó el diseño e implementación de un sistema de monitoreo y adquisición de datos inalámbrico con un interfaz en LabVIEW en tiempo real para monitoreo de parámetros eléctricos en DC y ambientales de un SFCR de 3kW, El cual se llevó a cabo integrando dispositivos como un Raspberry pi 3B+, un Arduino Nano, usando como sensores de temperatura 03 PT100, como sensor de tensión un divisor de tensión, como sensor de corriente el ACS758, como sensor de irradiancia una celda calibrada y como interfaz gráfica y almacenamiento de datos un programa elaborado e
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Arduino UNO NANO"

1

Sanchez, Gustavo, and Devika Kataria. "Teaching IIoT through Hands-on Activities." In Insights Into Global Engineering Education After the Birth of Industry 5.0 [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.100217.

Full text
Abstract:
This chapter describes a hands-on educational approach to teach Industrial Internet of Things (IIoT), including activities like problem analysis, programming, testing and debugging. Students are given autonomy to propose and evaluate different solutions, using adequate tools and following best practices. In parallel, key competencies like team management, project planning, costing and time scheduling, are imbibed in students to prepare them to become deployable automation engineers. To illustrate the proposed approach, we elaborate on the experience gained from teaching an elective course to u
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Arduino UNO NANO"

1

B, Shadaksharappa, Smitha J A, Adhya J J, Harshitha S, Bhavya R, and Kavana H S. "Iot Based Healthcare System for Paralysis Patient Using Machine Learning Algorithm." In International Conference on Recent Trends in Computing & Communication Technologies (ICRCCT’2K24). International Journal of Advanced Trends in Engineering and Management, 2024. http://dx.doi.org/10.59544/shde9779/icrcct24p87.

Full text
Abstract:
Healthcare project for paralysis patient presents a holistic assistive technology framework catering to the communication and health monitoring needs of individuals affected by paralysis. The system consists of two main components: the Body Tilt Communication System and Smart Support Gloves, both leveraging Arduino based technologies. The Body Tilt Communication System utilizes an Arduino Uno, ADXL Accelerometer, and LCD screen to enable message display through subtle body movements, while the Smart Support Gloves, incorporating Flex Sensors and Arduino Nano, facilitate straightforward communi
APA, Harvard, Vancouver, ISO, and other styles
2

Rodríguez González, Marco Antonio. "Programación aplicada en la tiflotecnología." In VI CONGRESO INVESTIGACIÓN, DESARROLLO E INNOVACIÓN DE LA UNIVERSIDAD INTERNACIONAL DE CIENCIA Y TECNOLOGÍA. Universidad Internacional de Ciencia y Tecnología, 2022. http://dx.doi.org/10.47300/978-9962-738-04-6-43.

Full text
Abstract:
En esta investigación se plantea el desarrollo de un prototipo para las personas con discapacidad visual aplicado en el campo de la tiflotecnología mediante la construcción del DAB (dispositivo de antebrazo) el cual permitirá la detección de obstáculos. La visión representa un papel central en la autonomía y desenvolvimiento de cualquier persona con diferentes patologías y alteraciones oculares que reducen en diversos grados o anulan la entrada de información visual imprescindible para el desempeño diario y bienestar. En la actualidad existen diversas tecnologías que ayudan a familiarizarse co
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!