Academic literature on the topic 'Articulation and occlusion'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Articulation and occlusion.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Articulation and occlusion"

1

Orthlieb, J. D., J. P. Ré, M. Jeany, and A. Giraudeau. "Articulation temporo-mandibulaire, occlusion et bruxisme." Revue de Stomatologie, de Chirurgie Maxillo-faciale et de Chirurgie Orale 117, no. 4 (September 2016): 207–11. http://dx.doi.org/10.1016/j.revsto.2016.07.006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dejak, Anna, Aneta Gliszczyńska, Aleksandra Kapiczke, and Beata Dejak. "Comparison of TMJ angles based on the ARCUSdigma II examination and occlusion records in the Protar 7 articulator." Prosthodontics 68, no. 1 (March 15, 2018): 73–84. http://dx.doi.org/10.5604/01.3001.0011.6808.

Full text
Abstract:
Introduction. Prosthetic restorations should be adjusted to the patients’ occlusion and articulation. Traditional and modern articulator and face-bow systems that simulate individual jaw movements are used in the treatment. Aim of the study. The aim of the study was to compare the values of TMJ angles based on the ARCUSdigma examination and wax occlusion records in the Protar 7 articulator. Method. The study was conducted on a group of 20 patients aged 23-30 years with full dentition and normal occlusion. The position of the maxilla was recorded with face-bow ARCUSevo. Every patient was examined using ARCUSdigma II device. Cast models of the maxilla and mandible were made and mounted in Protar 7 articulator. Wax occlusion records were taken in intercuspal, protrusive and laterotrusive positions. On their basis TMJ angles were established in the articulator. The sagittal condylar inclination and Bennett angles relative to the Frankfurt plane obtained using electronic measurement and manual settings in the articulator were compared. Results. Mean values of sagittal condylar inclination angles based on occlusion records in Protar 7 articulator amounted to 56.9° on the left and 53.7° on the right side and the ARCUSdigma respectively 58.8° for the left and 55.6° for the right TMJ. According to occlusion records in articulator average Bennett angles were valued 11.2° (left) and 9.7° (right), while ARCUSdigma 8.5° (left) and 7.3° (right). Conclusions. Mean values of sagittal condylar inclination angles determined by the occlusion records in Protar 7 articulator and obtained in the ARCUSdigma examination were different and higher than the average values. Mean values of Bennett angles obtained in an ARCUSdigma examination were lower than using occlusion records in Protar 7 articulator and lower than the average values.
APA, Harvard, Vancouver, ISO, and other styles
3

Arnautska, Hristina, Desislava Konstantinova, Mariana Dimova, Ivan Gerdzhikov, and Tihomir Georgiev. "Functional disorders in patients with unbalanced occlusion and articulation." Journal of Medical and Dental Practice 2, no. 3 (November 16, 2015): 293–99. http://dx.doi.org/10.18044/medinform.201523.293.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ercoline, William R., Kent K. Gillingham, Frances A. Greene, and Fred H. Previc. "Effects of Variations in Head-Up Display Pitch-Ladder Representations on Orientation Recognition." Proceedings of the Human Factors Society Annual Meeting 33, no. 20 (October 1989): 1401–5. http://dx.doi.org/10.1177/154193128903302008.

Full text
Abstract:
Head-up display (HUD) research has centered on modifications to the basic aircraft control symbology—the pitch-ladder lines. Although some of these modifications have led to minor improvements in attitude recognition, major problems still exist: pilots continue to experience spatial disorientation and to complain of occlusion due to the HUD symbols. This experiment compared four variations of a basic HUD pitch ladder: Display A, double articulation; Display B, single negative articulation; Display C, single negative articulation with gradually increasing thickness; and Display D, single negative articulation with gradually increasing thickness in a global arrangement. Accuracy of bank recognition was best when pitch-ladder symbology incorporated noticeable asymmetry. Double articulation and graduated thickness were associated with greater accuracy of pitch recognition. Studies under dynamic conditions are recommended.
APA, Harvard, Vancouver, ISO, and other styles
5

Ozawa, Erika, Ei-ichi Honda, Hiroshi Tomizato, Tohru Kurabayashi, Kulthida Nunthayanon, Hiroko Ohmori, Kazuo Shimazaki, and Takashi Ono. "Preliminary study of articulatory characteristics in open bite subjects revealed by 3T magnetic resonance imaging movies." APOS Trends in Orthodontics 11 (April 10, 2021): 14–22. http://dx.doi.org/10.25259/apos_174_2020.

Full text
Abstract:
Objectives: Previous studies have reported that articulatory dysfunction accompanied by a certain type of malocclusion can be improved by orthodontic treatment. We developed a 3-T magnetic resonance imaging (MRI) movie method with tooth visualization that can display the dynamic movement of articulation without radiation exposure. To the best of our knowledge, there is currently no report on the possible differences in articulatory movement between subjects with a normal occlusion and those with malocclusion using the 3T MRI movie method. Thus, the objective of this study was to examine the articulatory difference between subjects with a normal occlusion and those with an open bite using an MRI movie. Materials and Methods: Twenty healthy adult females, ten with a normal occlusion and ten with an anterior open bite were recruited. The overbite of the open bite subjects was zero or smaller, and all of them exhibited a tongue-thrusting habit during swallowing. A turbo spin echo image with a contrast medium was used to visualize the anterior teeth, and articulatory movement during articulation of the vowel-consonant-vowel syllable (/asa/) was scanned. The difference in tongue movement between subjects with a normal occlusion and those with an open bite was compared by measuring seven variables. Moreover, the distance between the incisal edge and the tongue apex during articulation of /s/ and the speech duration were compared. Furthermore, frequency analysis on /s/ by fast Fourier transform power spectrum was performed. Results: The tongue apex of the open bite subjects moved more anteriorly than that of the normal subjects. However, there was no significant difference in the phonetic analysis between subjects with a normal occlusion and those with an open bite. Conclusion: The 3-T MRI movie was an efficient method to quantify articulatory tongue movements. Although there was a difference in tongue movement during swallowing between subjects with a normal occlusion and those with an open bite, the difference in the articulatory tongue movements was minimal, suggesting it could be a functional compensation.
APA, Harvard, Vancouver, ISO, and other styles
6

Chkhikvadze, T. V., E. M. Roschin, and V. V. Bekreev. "Comparative analysis of the application of virtual and mechanical articulators in functional diagnostics." RUDN Journal of Medicine 24, no. 1 (December 15, 2020): 38–51. http://dx.doi.org/10.22363/2313-0245-2020-24-1-38-51.

Full text
Abstract:
The paper presents the results of examination of patients with articulation disorders of the lower jaw caused by internal pathology of the TMJ. The purpose of the presented work: to study the effectiveness of the use of mechanical and virtual articulators in the functional diagnosis of patients with internal TMJ disorders. All patients underwent comprehensive clinical and instrumental examination including cone-beam computed tomography (CT) and axiographic examination (optical axiograph Dentograf Prosystom, Russia). CBCT was used to assess the state of the TMJ and determine the individual ratio of jaw and joint models. When axiography was recorded and analyzed articular trajectories of the lower jaw. In the first group of patients dynamic occlusion was evaluated using a mechanical articulator, in the second group a virtual articulator was used. It was revealed that the use of mechanical articulators in functional diagnostics to assess dynamic occlusion is limited and does not allow to obtain individualized patient data, their efficiency was 75%. The use of virtual articulators allows to evaluate the dynamic occlusion during opening and closing of the mouth, protrusion and laterotrusion, as well as the continuous movement of the lower jaw with the registration of all possible dental contacts. Due to the combination of CT data of the patient’s head and virtual models, the highest accuracy of placing models in the virtual articulator in accordance with the individual characteristics of patients was achieved.
APA, Harvard, Vancouver, ISO, and other styles
7

Nahlah, E. A., P. S. Baker, D. S. Pannu, and J. Londono. "Technique for Rebasing and Tooth Replacement of the Implant Retained Fixed Complete Denture Incorporating an Existing Metal Framework." International Journal of Medical and Dental Sciences 2, no. 2 (July 1, 2013): 215. http://dx.doi.org/10.19056/ijmdsjssmes/2013/v2i2/86789.

Full text
Abstract:
This article describes a simplified impression technique for replacement of acrylic resin denture base material and teeth for an implant retained fixed complete denture utilizing the existing metal framework. This method permits precise alignment of the impression and framework to implants and residual ridges, and simultaneously provides a cast and record for articulation of replacement teeth at the appropriate vertical dimension of occlusion.
APA, Harvard, Vancouver, ISO, and other styles
8

Dimova, Mariana. "OCCLUSION AND ARTICULATION IN BRUXISM AND BRUXOMANIA INVESTIGATED WITH THE SYSTEM T-SCAN III." Journal of IMAB - Annual Proceeding (Scientific Papers) 20, no. 5 (November 25, 2014): 655–60. http://dx.doi.org/10.5272/jimab.2014205.655.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lykhota, K. M. "EVALUATION OF THE DYNAMICS OF OCCLUSION RATIO DURING ORTHODONTIC TREATMENT OF PATIENTS WITH PERMANENT BITE." Ukrainian Dental Almanac, no. 4 (December 12, 2018): 50–54. http://dx.doi.org/10.31718/2409-0255.4.2018.09.

Full text
Abstract:
The unity of the tooth-jaw system is ensured by the close interaction of dental rows, jaws, chewing and facial muscles, temporomandibular joint. Surgical anomalies of bite are often accompanied by significant changes in occlusion ratio of the tooth-jaw system, which significantly affects the quality of life of patients [1, 2, 3]. Significant influence on occlusion ratio has orthodontic treatment. Introduction of high technologies into the practice of prevention and treatment of abnormalities of the zygomatic system contributes to the improvement of dental health, however, the problem of violation of occlusive ratio in dental anomalies and deformations persists in connection with the increase in the prevalence of bite pathology among the population of Ukraine [4, 5]. Investigation of violations of occlusion of dentitions is an integral part of the complex functional analysis of the dental maxillary apparatus. The most common clinical technique for the analysis of occlusive ratio is the technique of occlusion through articulation paper. However, this method does not meet current requirements, because it reflects neither such parameters as the strength and timeliness of tooth contacts, nor contains information about the nature of occlusive violations. Checking only the static parameters of occlusion is not a complete objective method of assessing the quality of treatment. With a sufficient number and correctly placed occlusal contacts, adequate interposition of the components of the temporomandibular joint, the formation of physiological occlusion will be the basis for the uniform distribution of functional loads. In order to solve the problems, a comprehensive study of the parameters of dynamic occlusion is necessary [6, 7]. Up to date, an objective criterion for evaluating occlusion is the use of computerized analysis of occlusion with the help of T-Scan. The results obtained during this study can be used to control the quality of performed orthodontic treatment [6, 7, 8, 9]. Purpose. Determination of the dynamics of occlusal ratio for 117 people of different age groups with sagittal malocclusions during orthodontic treatment generally and specific methods. Materials and methods of research. Occlusion contacts were assessed using a computerized occlusion analysis of T-Scan III (USA). Depending on the type of pathology of the occlusion, patients were divided into two groups: A (patients with distal occlusion) and B (patients with mesial occlusion), which depended on the method of orthodontic treatment, and were further divided into 2 subgroups. In the subgroups A1 (33 patients) and B1 (28 patients), the treatment was performed with the help of individual myofunctional apparatus - Elastoelainers, in group II patients of subgroup A2 (35 patients), and patients of subgroup B2 (21 patients) - treatment was carried out using fixed dentistry (bracket system). The control group consisted of 20 people of the same age with physiological bites and intact dentition. Results. Studies have shown that people with sagittal malocclusions expressed disturbances of occlusal ratio (presence premature occlusal contacts on the natural teeth, changes in the direction of the trajectory of the total vector occlusion load) experienced significant changes in the dynamics of the proposed orthodontic treatment, and closer to those of the control group immediately after treatment. Conclusions. The effectiveness of orthodontic treatment of patients with sagittal anomalies of occlusion with the help of individually myofunctional devices has been proved, which is confirmed by the data of the dynamics of indices of computer occlusion.
APA, Harvard, Vancouver, ISO, and other styles
10

Davydov, В. N., Т. S. Kochkonyan, D. A. Domenyuk, S. V. Dmitrienko, and Ghamdan Al-Harazi. "Odontoscopic and morphometric assessment of occlusion circuits of permanent teeth in patients with physiological occlusion." Medical alphabet, no. 24 (September 26, 2021): 50–58. http://dx.doi.org/10.33667/2078-5631-2021-24-50-58.

Full text
Abstract:
A dentist needs special knowledge in odontology and odontoglyphics, which allows visualizing the space and relief of the tooth surface, as well as conducting an in-depth analysis of the individual morphometric characteristics of the tooth. Expansion of knowledge about the variability of the occlusal relief will allow achieving balanced occlusal-articulation relationships of the dentition and preserving the physiological state of the dentition. The article presents the results of odontoscopic and morphometric studies of vertical, transverse parameters of the upper large molars in patients with various physiological types of occlusion. The subject of the study was the segments of the upper molars obtained from plaster models of the jaws of 92 people with physiological occlusion, a full set of permanent teeth and various types of dental system (patients in group 1 – normodontism, patients in group 2 – macrodontism, patients in group 3 – microdontism). For morphometry in the transverse direction, the vestibular-lingual size of the crown and neck of the tooth, as well as the intertubercular distance, were used. To measure the vertical parameters, the height of the mesial (protocone, paracone) and distal (metacone, hypocone) odontomeres and tubercle of the occlusal surface was determined. The results of the study showed that in people with physiological occlusion and macrodontism of permanent teeth, vertical, transverse parameters exceed those of people with normodont and microdont types of the dental system. It is advisable to use the obtained odontometric features at the stages of diagnosing occlusal relationships and identifying various forms of pathological, physiological abrasion with varying degrees of loss of occlusal surfaces.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Articulation and occlusion"

1

Dupas, Pierre-Hubert. "Enregistrement de la cinématique mandibulaire : proposition d'un prototype : le cinétic." Lille 2, 1988. http://www.theses.fr/1988LIL2D201.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Courtieu, Klervi Hoornaert Alain. "Étude de la reproductibilité d'un système de mesure de la cinématique mandibulaire KAVO ARCUS Digma /." [S.l.] : [s.n.], 2004. http://theses.univ-nantes.fr/thesemed/CDcourtieu.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

DALMASSO, CHRISTIAN. "Quantification du test musculaire interessant le deltoide moyen, avec interrogation digitale du temporal posterieur et de l'articulation temporo-mandibulaire, lors d'une perturbation occlusale." Nice, 1991. http://www.theses.fr/1991NICE7503.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bourneuf-Bodin, Christiane. "Intérêt des traitements occlusaux dans l'évolution de la symptomatologie de la dysfonction crânio-mandibulaire." Brest, 1992. http://www.theses.fr/1992BRES4017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jourdan, Philippe. "Etude du comportement mécanique de différrents chassis maxillaires et mandibulaires par la technique des éléments finis." Toulouse 3, 1992. http://www.theses.fr/1992TOU30005.

Full text
Abstract:
Au cours de cette etude, nous avons modelise vingt-huit chassis mandibulaires et maxillaires sur lesquels nous avons applique des conditions limites. Les deplacements sellaires et les deplacements des dents piliers ont ete quantifies ainsi que les contraintes au sein du chassis
APA, Harvard, Vancouver, ISO, and other styles
6

Servière, François. "Rapport mandibulo-crânien et posture : approche baropodométrique." Reims, 1988. https://n2t.net/ark:/47881/m6z60n3p.

Full text
Abstract:
La 4e de couverture indique : "Les approches les plus récentes en occlusodontie clinique font appel aux concepts d'interaction pathologique entre l'appareil manducateur et le corps (concepts des suites lésionnelles ascendantes et descendantes), émis par les ostéopathes et par les chiropracteurs. Notre étude vise à mettre en évidence cette relation, par le biais de la baropodométrie numérique. Après un exposé de l'anatomie structurelle et de la biomécanique du membre inférieur, les rapports fonctionnels intersegmentaires du membre inférieur sont détaillés ; ils s'inscrivent dans le cadre général des mécanismes homéostatiques. Les mécanismes règlent la statique, et sont abordés par l'analyse posturale. Après l'exposé d'éléments de posturologie, la pathologie posturale est étudiée. Cinq théories (théories de GOODHEART, de MEZIERES, de LITTLEJOHN, de BARON, théorie podologique) illustrent la diversité des points de vue et la complexité des structures mises en jeu. Parmi celles-ci, l'appareil manducateur est impliqué et les dysfonctions de l'articulation temporo-mandibulaire ne s'expriment pas isolément. L'expérimentation montre que la variation des rapports mandibulo-crâniens induit de façon immédiate et franche une modification de l'empreinte podale, et de la répartition des points d'appui au sol, l'existence de mécanismes d'adaptation descendants se trouve confirmée. "
APA, Harvard, Vancouver, ISO, and other styles
7

Gasparoux, Elizabeth. "Le diagnostic des dysfonctions occlusales lors de l'examen clinique prépothétique en denture naturelle." Bordeaux 2, 1988. http://www.theses.fr/1988BOR20062.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Abdelli, Cresté Aurélia Hoornaert Alain. "Posture et appareil manducateur." [S.l.] : [s.n.], 2008. http://castore.univ-nantes.fr/castore/GetOAIRef?idDoc=50296.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Caucanas, Marie-Claude Arquier. "Etude vidéo-informatique de la fiabilité de la déglutition utilisée dans la recherche de la dimension verticale d'occlusion." Toulouse 3, 1994. http://www.theses.fr/1994TOU30180.

Full text
Abstract:
Ce travail est consacre a l'etude de la deglutition et de sa fiabilite pour determiner la dimension verticale d'occlusion en prothese complete. L'auteur decrit les elements anatomiques qui interviennent dans cette fonction et aborde la physiologie de la deglutition normale, atypique, l'evolution de la deglutition du nouveau-ne a l'adulte, la physiopathologie et l'incidence du vieillissement sur la deglutition. L'etude de la dimension verticale d'occlusion, des conditions de determination au fauteuil, des differentes methodes utilisees pour son approche et les consequences des erreurs de determination, precedent l'experimentation. Le materiel video-informatique employe pour la recherche est compose de cameras a infra-rouges qui filment une sequence secondairement analysee dans les trois dimensions de l'espace, image par image. L'auteur selectionne 5 patients edentes mono ou bi-maxillaires porteurs de chapes ferromagnetiques stabilisant la prothese mandibulaire, et confectionne pour chaque patient une base mandibulaire sans couloir dentaire, et 4 duplicata realises a -2, -4, +2 et +4 mm par rapport a la hauteur de sa prothese d'usage qui sert de reference. Chaque patient porte un reflecteur colle sur le front et un reflecteur extra-oral colle sur chaque appareil mandibulaire. Chaque patient effectue une serie de deglutition de salive, d'eau, de banane, avec chacun des duplicata, la base et l'appareil d'usage et termine chaque serie par un contact dentaire volontaire. Les differents niveaux de deglutition sont compares dans le plan vertical entre eux, entre les differents appareils, la position d'intercuspidie servant de reference. L'analyse qualitative des resultats conclut au manque de fiabilite de la fonction de deglutition utilisee lors de la determination precise de la dvo en prothese complete
APA, Harvard, Vancouver, ISO, and other styles
10

Crivellaro, Fernando Sacilotto. "Estudo e desenvolvimento de sistema baseado em sensores de pressão aplicados à ortodontia." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2016. http://hdl.handle.net/10183/157806.

Full text
Abstract:
Este trabalho tem por objetivo o estudo e o desenvolvimento de uma solução de engenharia para o mapeamento e caracterização da oclusão dentária, não somente no âmbito de sua distribuição ao longo da arcada, mas também através da mensuração da intensidade de pressão nos pontos de contato oclusal interarco. Neste sentido, empregaram-se esforços no aprofundamento do conhecimento neste campo da Odontologia, assim como, na elaboração de um sistema experimental que, utilizando sensores de pressão/força resistivos (FSR) específicos para uso odontológico, viabilizou a análise do estado da oclusão, atuando como agente facilitador no diagnóstico de desequilíbrios oclusais. Inicialmente, são apresentados e esclarecidos os principais conceitos da esfera odontológica, os quais são tomados como base para todos os projetos deste trabalho, além da abordagem referente às formas de contato entre os dentes, aos diferentes tipos de oclusão e seus problemas. Em relação ao desenvolvimento do sistema, foram projetadas duas placas de circuito impresso para interface com os sensores e elaborados o firmware de acesso ao hardware, assim como o software de gerenciamento global do sistema. Todos os blocos do circuito de condicionamento foram avaliados e as suas funcionalidades validadas. Do mesmo modo, a caracterização da resposta dos sensores e a sua homogeneidade ao longo da extensão sensível foram analisadas, demonstrando que a resistência elétrica varia de forma análoga em todas as áreas do sensor. Através de ensaios realizados com sujeito envolvido no projeto, estabeleceu-se um comparativo entre a utilização do papel carbono e o sistema desenvolvido, mostrando as vantagens na utilização do segundo, principalmente atreladas à capacidade de avaliação da intensidade dos contatos oclusais. Por fim, ainda se valendo do uso paralelo do papel carbono, foram efetuados ensaios de análise da oclusão em sujeito envolvido no projeto utilizando placa miorrelaxante, possibilitando a utilização da capacidade do sistema desenvolvido para executar ajustes precisos na placa, com a finalidade de manter o balanço de pressões oclusais entre ambos os lados da arcada.
This essay has as objective the study and development of an engineer solution for the dental occlusion mapping and characterization, not only related to the interarch occlusal contact distribution, but also through the pressure magnitude measuring in each. In this sense, was employed effort in the Odontological knowledge increasing and also in the system elaboration allowing the occlusion state evaluation and acting as an easier agent in the occlusion disturbs diagnosing using a specific pressure/force sensing resistor (FSR) for dental use. Initially the main concepts of the Odontological sphere are presented, clarified and took as a base for all the projects in this essay. Besides this, different teeth contacts shapes are shown, as well as the occlusion’s types and its problems. In the system development, two printed circuit boards were designed for sensor interfacing. The hardware access through the firmware was elaborated, even as the global system managing software. All the conditioning circuit blocks and functionalities were evaluated and validated. In the same way, the sensor’s output and its homogeneity through all the sensible extension were evaluated, showing that the sensor’s electric resistance changes in the same form in all the sensor’s areas. In addition, it was showed the advantages of the developed system over the articulation paper through trials with a subject that is part of the project, showing the capacity of the system in the occlusion contacts magnitude evaluation. Ultimately, also in an articulation paper versus the developed system comparison, it was made occlusion analysis trials with subject using a night guard for teeth grinding (bruxism), showing the system capacity of precisely adjust the night guards for pressure balance between the both arch sides.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Articulation and occlusion"

1

Management of temporomandibular disorders and occlusion. 3rd ed. St. Louis: Mosby-Year Book, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

P, Okeson Jeffrey, ed. Management of temporomandibular disorders and occlusion. 2nd ed. St. Louis: Mosby, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Management of temporomandibular disorders and occlusion. 4th ed. St. Louis: Mosby, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Management of temporomandibular disorders and occlusion. 5th ed. St. Louis, Mo: Mosby, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Temporomandibular disorders: Classification, diagnosis, management. 3rd ed. Chicago: Year Book Medical Publishers, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

E, Bell Welden, ed. Temporomandibular disorders: Classification, diagnosis, management. 2nd ed. Chicago: Year Book Medical, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Management of Temporomandibular Disorders and Occlusion. 6th ed. Mosby, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Okeson, Jeffrey P. Management of Temporomandibular Disorders and Occlusion. 5th ed. Mosby, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rozencweig. Algies et dysfonctionnements de l'appareil manducateur: Propositions diagnostiques et thérapeutiques. Cdp - Centre de Protheses, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pattison, George. A Rhetorics of the Word. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780198813514.001.0001.

Full text
Abstract:
A Rhetorics of the Word is the second volume of a three-part philosophy of Christian life. It approaches Christian life as expressive of a divine calling or vocation. The word Church (ekklesia) and the role of naming in baptism indicate the fundamental place of calling in Christian life. However, ideas of vocation are difficult to access in a world shaped by the experience of disenchantment. The difficulties of articulating vocation are explored with reference to Weber, Heidegger, and Kierkegaard. These are further connected to a general crisis of language, manifesting in the degradation of political discourse (Arendt) and the impact of new communications technology on human discourse. This impact can be seen as reinforcing an occlusion of language in favour of rationality already evidenced in the philosophical tradition and technocratic management. New possibilities for thinking vocation are pursued through the biblical prophets (with emphasis on Buber’s and Rosenzweig’s reinterpretation of the call of Moses), Saint John, and Russian philosophies of language (Florensky to Bakhtin). Vocation emerges as bound up with the possibility of being name-bearers, enabling a mutuality of call and response. This is then evidenced further in ethics and poetics, where Levinas and Hermann Broch (The Death of Virgil) become major points of reference. In conclusion, the themes of calling and the name are seen to shape the possibility of love—the subject of the final part of the philosophy of Christian life: A Metaphysics of Love.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Articulation and occlusion"

1

Ozkan, Yasemin K. "Movements and Mechanics of Mandible Occlusion Concepts and Laws of Articulation." In Complete Denture Prosthodontics, 293–347. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-69032-2_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Stevens, DDS, Christopher J. "T-Scan Case Finishing Applications in Aesthetic Dentistry Assisted by the iTero Digital Impression System." In Handbook of Research on Computerized Occlusal Analysis Technology Applications in Dental Medicine, 705–43. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-6587-3.ch016.

Full text
Abstract:
This chapter introduces the iTero digital impression system as a companion to the T-Scan Occlusal Analysis System. Occlusion as a component of aesthetic dentistry is discussed, and how the aesthetic case is aided by T-Scan force control at insertion. The chapter explains that brittle adhesive restorations cannot be evaluated occlusally prior to bonding. Combined with the spatial errors inherent with impression material setting and stone cast articulation, obtaining reliable interocclusal spatial relationships with adhesive restorations can be compromised. Alternatively, the iTero system accurately captures preparation shapes and the opposing interocclusal relationships, which eliminate typical, non-digital cast articulation errors. These clinical realities are illustrated in a10-unit porcelain veneer Case Report, where the iTero system and the T-Scan system are employed together. Finally, recommendations are made that Dental Medicine move towards digital impression making and accept the importance of the T-Scan system in occlusion to improve the standard of patient care.
APA, Harvard, Vancouver, ISO, and other styles
3

"Restorative dentistry 2: repairing teeth." In Oxford Handbook of Clinical Dentistry, edited by Bethany Rushworth and Anastasios Kanatas, 225–71. Oxford University Press, 2020. http://dx.doi.org/10.1093/med/9780198832171.003.0006.

Full text
Abstract:
This chapter covers the broad topic of repairing teeth, from the basics of composite and amalgam restorations, to the more advanced concepts of occlusion, veneers, and the management of tooth wear. Occlusion is a topic of paramount importance when planning restorative treatment and is something that is often overlooked. The updated chapter includes detailed definitions and occlusal considerations for restorative procedures, such as occlusal record taking, deciding between a confirmative or reorganizational approach to care, and articulation of study models. Indications for various techniques and materials are discussed, including necessary tooth preparation and cementation advice where relevant. Although its use is reducing, amalgam still plays a part in the day-to-day dentistry of many clinicians, therefore its indications, applications, and the use of liners is included. Temporary restorations are considered including preformed, laboratory custom-made, and chair-side techniques.
APA, Harvard, Vancouver, ISO, and other styles
4

White, Eric B. "Afterword: The Robot Does (Not) Exist." In Reading Machines in the Modernist Transatlantic, 265–69. Edinburgh University Press, 2020. http://dx.doi.org/10.3366/edinburgh/9781474441490.003.0007.

Full text
Abstract:
The Afterword consolidates the book’s arguments about the spatial practices of the techno-bathetic avant-gardes, who harnessed the semantic power of technology to critique its broader cultural contexts. It extends Chapter 5’s discussion of Ralph Ellison’s Invisible Man by exploring how the unnamed protagonist critiqued the technicities by which white hegemonies sustained cultural dominance, while simultaneously introducing alternative approaches. As in other chapters, the Afterword locates the technological sublime at the root of this dominance; Ellison not only exposes the potent grip that its servile dialectics exert on Western imaginations, but also the bathetic contexts of their articulation in culture, which are often repressed. For Ellison, as for Gilbert Simondon, this occlusion is exemplified by the ‘robot’, a cultural creation that fuses technical discourses in engineering with industrial alienation and narratives of the technological sublime. By exposing the means by which techno-servility entered culture, and yoking it to racial difference, Ellison ‘plung[es] outside history’ to engender new modes of technological agency, in the US and beyond. The Afterword argues that Ellison’s diachronic strategies exemplify the task of techno-bathetic avant-gardes: to perform an intermediary critique of the technological sublime before introducing alternative, emancipatory narratives, which can gain traction in the public sphere.
APA, Harvard, Vancouver, ISO, and other styles
5

Kim, DDS, MS, PhD, Jinhwan. "Digitalized Implant Occlusion with the T-Scan System." In Handbook of Research on Computerized Occlusal Analysis Technology Applications in Dental Medicine, 562–601. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-6587-3.ch012.

Full text
Abstract:
The relative occlusal force and real-time occlusal contact timing data provided by the T-Scan technology can be used to manage the insertion occlusal force design of implant prostheses, as their long-term survivability is tied directly to their installed occlusal function. This chapter discusses how in daily dental practice clinicians spend a great deal of time making corrective occlusal adjustments using solely articulating paper as their intended guide. However, current research shows that articulating paper markings do not measure occlusal force, such that implant occlusal force control is compromised, which can lead to peri-implant tissue loss, breakage of implant restorative components, and de-osseointegration. However, by using the T-Scan technology, the clinician eliminates the subjectivity involved in using articulating paper ensuring the occlusal design of newly installed implant prostheses are optimal improving prosthesis longevity. Examples are presented of how T-Scan force and time data can aid in implant restoration occlusal force control.
APA, Harvard, Vancouver, ISO, and other styles
6

Kim, DDS MS PhD, Jinhwan. "Controlling the Implant Supported Occlusion Utilizing the T-Scan System." In Advances in Medical Technologies and Clinical Practice, 996–1055. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9254-9.ch014.

Full text
Abstract:
The relative occlusal force and real-time occlusal contact timing data provided by the T-Scan technology can be used to manage the insertion occlusal force design of implant prostheses, as their long-term survivability is tied directly to their installed occlusal function. This chapter discusses how in daily dental practice, clinicians spend a great deal of time making corrective occlusal adjustments using solely articulating paper as their intended guide. However, current research shows that articulating paper markings do not measure occlusal force, and that dentists poorly Subjectively Interpret the appearance characteristics of the markings, such that implant occlusal force control is highly compromised, leading to peri-implant tissue loss, de-osseointegration, and elevated frequency rates of breakage of implant restorative components. However, by using the T-Scan technology, the clinician eliminates the subjectivity involved in using articulating paper. This ensures the occlusal design of newly-installed implant prostheses are optimal, ensuring prosthesis longevity. Case examples are presented of how occlusal adjustments that employ T-Scan force and timing data with simultaneously-recorded EMG data aid in implant restoration occlusal force control by not only lessening masticatory muscle hyperactivity, but also by improving the muscle tone and length of the face, head, and neck musculature.
APA, Harvard, Vancouver, ISO, and other styles
7

Trinkaus, Erik, Alexandra P. Buzhilova, Maria B. Mednikova, and Maria V. Dobrovolskaya. "The Ages-at-Death and Sexes of the Sunghir Humans." In The People of Sunghir. Oxford University Press, 2014. http://dx.doi.org/10.1093/oso/9780199381050.003.0009.

Full text
Abstract:
Assessment of the ages-at-death and the probable sexes of the Sunghir humans provides a baseline for their paleobiological evaluation. The former is particularly important for the comparative analysis of the immature Sunghir 2 and 3 skeletons, given the marked changes in size and shape with development. The latter is more important for the adult Sunghir 1, 5, and 6 remains, given some degree of sexual dimorphism among recent humans and apparently within Late Pleistocene early modern humans. In the assessment of age-at-death, it is necessary to evaluate the remains with reference to chronological scales derived from extant human populations of known age (or very recent historical skeletal samples with documented ages). This consideration applies particularly to changes in fibrocartilaginous articulations with age (in this case, a sternal rib end and an auricular surface of Sunghir 1) and to dental calcification during development (for Sunghir 2 and 3). The majority of the data available for these approaches derives from recent European and European-derived (primarily North American) populations, with occasional cross-references to more limited data on recent populations from elsewhere in the Old World. The one exception to this requirement is dental occlusal attrition, for which very general Late Pleistocene (and preindustrial Holocene) reference samples are appropriate, in all cases using scales that are based either on other methods of skeletal aging or employ some version of the “Miles technique” (sequential assessment of dental wear for postcanine teeth as they come into functional occlusion; Brothwell 1981). The determination of sex is most reliable when it utilizes the pelvis, and there is a series of criteria for pelvic sexual evaluation that appear to be universal among recent humans (Brůžek 2002). These dimorphic features mostly appear during adolescence associated with differential lateral development of the pelvis (Coleman 1969; Lavelle 1995). Dimorphic aspects of the greater sciatic notch may appear prior to puberty (Holcomb and Konigsberg 1995; Scheuer and Black 2000), but tests sexing recent human immature skeletons of known sex have provided poor results and tend to identify males more accurately than females (Cardoso and Saunders 2008; Vlak et al. 2008; Wilson et al. 2008).
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Articulation and occlusion"

1

Meluzzi, Chiara. "The production of Italian dental affricates by Portuguese speakers." In 11th International Conference of Experimental Linguistics. ExLing Society, 2020. http://dx.doi.org/10.36505/exling-2020/11/0032/000447.

Full text
Abstract:
This work deals with the production of Italian dental affricates /ts dz/ by 2 female Portuguese speakers. Due to the lack of affricates in their L1, the aim was testing whether an affricate articulation and lengthening is preserved across phonological contexts. Through sentence-list reading, it will be shown how the affricate articulation is generally preserved, although /dz/ tends to reduce into a fricative /z/ more than the voiceless /ts/. An intermediate degree of sonority has also been detected together with a peculiar lengthening of the affricate involving only the occlusive part, whereas the fricative remains unvaried. These results may indicate a different phonological status of dental affricates for LS speakers.
APA, Harvard, Vancouver, ISO, and other styles
2

Henderson, Sarah E., Alejandro J. Almarza, Scott Tashman, and Amy L. McCarty. "Temporomandibular Joint Kinematics of the Rabbit Model With Mechanically Disrupted Occlusion." In ASME 2011 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2011. http://dx.doi.org/10.1115/sbc2011-53292.

Full text
Abstract:
Degeneration of the articulating surfaces and pain associated with temporomandibular joint (TMJ) dysfunction are the primary symptoms of TMJ disorders (TMDs), where normal life activities such as eating, talking, and even sleeping may be drastically impaired [1–3]. To accelerate the discovery of effective therapeutic interventions for the treatment of TMD pain, we have been establishing a novel non-invasive approach for objectively assessing the presence of joint hypersensitivity. Our approach to identify chronic joint pain is based on evidence that all of the etiological factors associated with TMD pain implicate remodeling and degeneration of the joint in response to alterations in motion and loading. The injury model used for this study was a reversible, mechanical model through splint placement on the molars. It is hypothesized that arthrokinematic analysis will identify a specific pattern of functional changes that constitute a signature for the presence of irreversible damage.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography