Relevant bibliographies by topics / As-cast alloy microstructure

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'As-cast alloy microstructure'

Author: Grafiati
Published: 4 June 2021
Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'As-cast alloy microstructure.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "As-cast alloy microstructure"

1

Shen, Jia, Ming Bo Yang, Fu Sheng Pan, and Ren Ju Cheng. "Comparison of As-Cast Microstructures and Mechanical Properties for Mg-Ce-Mn-Sc and Mg-Ce-Mn-Zn Magnesium Alloys." Materials Science Forum 610-613 (January 2009): 746–49. http://dx.doi.org/10.4028/www.scientific.net/msf.610-613.746.

Full text
Abstract:
The as-cast microstructures and mechanical properties of Mg-3Ce-1.2Mn-0.9Sc and Mg-3Ce-1.2Mn-1Zn magnesium alloys were investigated and compared. The results indicate that the as-cast microstructure of Mg-3Ce-1.2Mn-0.9Sc alloy was mainly composed of -Mg, Mg12Ce and Mn2Sc phases, and that the as-cast microstructure of Mg-3Ce-1.2Mn-1Zn alloy was mainly composed of -Mg, Mg12Ce and MgZn phases. In addition, the as-cast tensile and creep properties of Mg-3Ce-1.2Mn-0.9Sc alloy were higher than that of the Mg-3Ce-1.2Mn-1Zn alloy. The difference of the two alloys in as-cast tensile and creep propert
APA, Harvard, Vancouver, ISO, and other styles
2

Guggari ,, Geetanjali S., Veena Badiger, and Dr Shivakumar S. "Microstructure and Wear Behavior Of as Cast Al-25mg2si-2cu-2ni Alloy." International Journal of Engineering Research 4, no. 9 (2015): 470–74. http://dx.doi.org/10.17950/ijer/v4s9/901.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Thier, M., M. Hühner, E. Kobus, D. Drescher, and C. Bourauel. "Microstructure of As-cast NiTi alloy." Materials Characterization 27, no. 3 (1991): 133–40. http://dx.doi.org/10.1016/1044-5803(91)90056-a.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Krishnan, Arjun Bala, Kavin Selvaraj, Akhil Madhusoodhanan Geethakumari, and Ravi Manickam. "Effect of Heat Treatment on the Microstructure of Gravity Cast and Squeeze Cast Al-Si-Mg Alloy." Materials Science Forum 830-831 (September 2015): 164–67. http://dx.doi.org/10.4028/www.scientific.net/msf.830-831.164.

Full text
Abstract:
The present work deals with the effect of solutionising heat treatment on the features of Al-7Si-0.3Mg (A356) alloy in terms of microstructural modifications and hardness. The microstructure of sand cast and gravity cast alloys are coarse which results in lower strength compared to the alloys cast using modern casting techniques such as squeeze casting which is used for the fabrication of near-net-shaped castings. The influence of enhanced cooling rate on the hardness and microstructure of the squeeze casting technique has been exploited in the present study. In order to optimise the heat trea
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Jia, Wang, Li, Meng, and He. "Effect of Fe Addition on Microstructure and Mechanical Properties of As-cast Ti49Ni51 Alloy." Materials 12, no. 19 (2019): 3114. http://dx.doi.org/10.3390/ma12193114.

Full text
Abstract:
Effect of Fe addition on microstructure and mechanical properties of as-cast Ti49Ni51 alloy were investigated. The experimental results shows the microstructures of Ti48.5Ni51Fe0.5 and Ti48Ni51Fe1 alloys are mainly composed of TiNi matrix phase (body-centered cubic, BCC), Ti3Ni4 and Ni2.67Ti1.33 phases; the microstructure of Ti47Ni51Fe2 alloy is mainly composed of BCC TiNi, Ti3Ni4, Ni2.67Ti1.33, and Ni3Ti phases; the microstructure of the Ti45Ni51Fe4 alloy is mainly composed of TiNi, Ti3Ni4 and Ni3Ti phases. The Ni3Ti nanocrystalline precipitates at the adjacent position of Ni2.67Ti1.33 phase.
APA, Harvard, Vancouver, ISO, and other styles
6

Pataric, Aleksandra, Marija Mihailovic, Branislav Markovic, Miroslav Sokic, Andreja Radovanovic, and Branka Jordovic. "Microstructure as an essential aspect of EN AW 7075 aluminum alloy quality influenced by electromagnetic field during continuous casting process." Chemical Industry 75, no. 1 (2021): 31–37. http://dx.doi.org/10.2298/hemind201214006p.

Full text
Abstract:
Microstructure assessment is crucial for the design and production of high-quality alloys such as cast aluminum alloy ingots. Along with the effect of a more homogeneous microstructure to result in much better mechanical properties, better as-cast alloy quality indicates a higher efficiency of the aluminum alloys production process. During the aluminum alloy solidification process many microstructural defects can occur, which deteriorate the mechanical properties and hence decrease the usability of such an ingot. Application of the electromagnetic field during the vertical continuous casting p
APA, Harvard, Vancouver, ISO, and other styles
7

Han, Ping, and Jian Ting Guo. "Effect of Process on Microstructure and Elevated Temperature Mechanical Behavior of Multi-Phase NiAl-Fe(Nb) Alloy." Advanced Materials Research 299-300 (July 2011): 163–66. http://dx.doi.org/10.4028/www.scientific.net/amr.299-300.163.

Full text
Abstract:
The microstructure and elevated temperature mechanical behavior of as-cast, HIPed and directionally solidified NiAl-Fe(Nb) Alloys have been investigated. The results show that the microstructure of as-cast NiAl-Fe(Nb) alloy consists of dendritic regions (b) and interdendritic regions (g/g¢) with non-continuous NbNiAl(Laves) phase segregating at the interfaces of b and g/g¢ phases. The HIP processing does not alter the microstructure of as-cast alloy. The longitudinal dendritic microstructure of the DS NiAl-Fe(Nb) alloy is regular. Room temperature elongations of as-cast and HIPed NiAl-Fe(Nb) a
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, Rui Qing, An Yun Li, Li Jun Peng, and Guang Bin Qiu. "Microstructure and Properties of As-Cast Cu-20Ni-5Sn Alloy." Applied Mechanics and Materials 341-342 (July 2013): 18–22. http://dx.doi.org/10.4028/www.scientific.net/amm.341-342.18.

Full text
Abstract:
Cu-20Ni-5Sn alloy has not only high content of Ni melted point 1453°C, but also low melting point elements of Sn melted at 231.9°C, therefore, the grain structure of alloy as-cast is in perfect dendrite that lends to form segregation and inverse segregation of Sn, so that the hot rolling (cogging) processing is restricted. The influence of casting methods, cooling rate and heat treatment on the microstructures and properties of as-cast Cu-20Ni-5Sn alloy were investigated. The results show that, compared to the ingot casted in iron mold and graphite mold, the microstructure of Cu-20Ni-5Sn ingot
APA, Harvard, Vancouver, ISO, and other styles
9

Cheng, Ren Ju, Ai Tao Tang, Ming Bo Yang, and Fu Sheng Pan. "Effects of Al-Sr Master Alloys on the As-Cast Microstructure of the AZ31 Magnesium Alloys." Materials Science Forum 546-549 (May 2007): 183–86. http://dx.doi.org/10.4028/www.scientific.net/msf.546-549.183.

Full text
Abstract:
The influence of Al-10.5%Sr master alloy, which is much cheaper than Mg-Sr master alloys, on the as-cast microstructure of the AZ31 alloy was investigated. The research results revealed that the Al-10.5%Sr master alloy produced obvious modification of the as-cast microstructure of the AZ31 alloy, and the modification efficiency increased with the holding time from 0min to 60min and the amount of Sr from 0.01% to 0.1%. Moreover, the results also showed that the Al-10.5%Sr master alloys of different states had different modification efficiency on the as-cast microstructure of the AZ31 alloy. The
APA, Harvard, Vancouver, ISO, and other styles
10

Park, Sung S., Geun Tae Bae, Jung G. Lee, Dae H. Kang, Kwang Seon Shin, and Nack J. Kim. "Microstructure and Mechanical Properties of Twin-Roll Strip Cast Mg Alloys." Materials Science Forum 539-543 (March 2007): 119–26. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.119.

Full text
Abstract:
Development of wrought Mg alloys, particularly in sheet form, is essential to support the growing interest for lightweight components in the automotive industry. However, development of Mg alloy sheets has been quite slow due to the complexity of sheet production originated from limited deformability of Mg. In this respect, twin-roll strip casting, a one-step processing of flat rolled products, can be an alternative for the production of Mg alloy sheets. In this study, AZ31 and experimental ZM series alloys are twin-roll strip cast into 2 mm thick sheets. The microstructure of the as-cast AZ31
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "As-cast alloy microstructure"

1

Dini, Hoda. "As-cast AZ91D Magnesium Alloy Properties- Effect of Microstructure and Temperature." Licentiate thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH. Forskningsmiljö Material och tillverkning – Gjutning, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-28467.

Full text
Abstract:
Magnesium and magnesium alloys are used in a wide variety of structural applications including automotive, aerospace, hand tools and electronic industries thanks to their light weight, high specific strength, adequate corrosion resistance and good castability. Al and Zn are the primary alloying elements in commercial Mg alloys and commonly used in automotive industries. AZ91 is one of the most popular Mg alloys containing 9% Al and 1% Zn. Hence, lots of research have been done during last decades on AZ91D. However, the existing data concerning mechanical properties and microstructural features
APA, Harvard, Vancouver, ISO, and other styles
2

Dini, Hoda. "As-cast AZ91D magnesium alloy properties : Effects of microstructure and temperature." Doctoral thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Material och tillverkning, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-38148.

Full text
Abstract:
Today, there is an essential need for lightweight, energy-efficient, environmentally benign engineering systems, and this is the driving force behind the development of a wide range of structural and functional materials for energy generation, energy storage, propulsion, and transportation. These challenges have motivated the use of magnesium alloys for lightweight structural systems. Magnesium has a density of 1.74 g/cm3, which is almost 30% less than that of aluminium, one quarter of steel, and almost identicalto polymers. The ease of recycling magnesium alloys as compared to polymers makes
APA, Harvard, Vancouver, ISO, and other styles
3

Basirat, Mitra. "Microstructural Evolution In As-cast Alloys during Plastic Deformation." Doctoral thesis, KTH, Metallernas gjutning, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-133362.

Full text
Abstract:
The effect of deformation on microstructural changes in metals and alloys is the subject of considerable practical interest. The ultimate goal is to control, improve and optimize the microstructure and texture of the finished products produced by metal forming operations. The development in the subject field is remarkable but a more in-depth study could lead us to the better understanding of the phenomena.   In the present work microstructural evolution during the plastic deformation of as-cast pure metals and alloys is studied. An experimental method was developed to study the material behavi
APA, Harvard, Vancouver, ISO, and other styles
4

Liu, Xiaorui. "Crystallographic and microstructural study of as-cast and heat-treated Srmodified Al-12.7Si alloys." Thesis, Université de Lorraine, 2016. http://www.theses.fr/2016LORR0103/document.

Full text
Abstract:
Les alliages aluminium-silicium (Al-Si) ont attiré une attention considérable en raison de leur importance pour les applications industrielles. Dans le présent travail, des alliages à haute pureté (Al-12.7 wt. % Si) avec et sans ajout de strontium (400 ppm), solidifiés lentement en creuset ou de façon dirigée (DS), ont été préparés et traités thermiquement. L'influence de l'ajout de strontium et des post-traitements thermiques sur les caractéristiques microstructuraux et cristallographiques des phases eutectiques a été étudiée de façon systématique. Les caractéristiques de croissance du silici
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Lei. "Effect of a magnetic field on crystallography and microstructure of as-cast Al-based binary alloys." Thesis, Metz, 2010. http://www.theses.fr/2011METZ015S/document.

Full text
Abstract:
Dans ce travail, les effets du champ magnétique sur la cristallographie et la microstructure d'alliages Al lors de la solidification sont systématiquement étudiés. L'étude des phases primaires Al3Fe et Al3Zr indique que l'interface facettée et le maclage influencent leur morphologie. Pour Al3Fe, la faible vitesse de migration des plans parallèles à la direction d'extension conduit à la forme de barre. Le type I de maclage provoque la courbure du cristal. Pour Al3Zr, les vitesses de migration différentes des différents plans conduisent à la forme tabulaire et le maclage composé crée les dentrit
APA, Harvard, Vancouver, ISO, and other styles
6

Montenegro, Ieda Nadja Silva. "Estudo das ligas tit?nio-zirc?nio resultantes do processo de fundi??o plasma-skull para aplica??es como biomateriais." Universidade Federal do Rio Grande do Norte, 2007. http://repositorio.ufrn.br:8080/jspui/handle/123456789/17679.

Full text
Abstract:
Made available in DSpace on 2014-12-17T15:42:01Z (GMT). No. of bitstreams: 1 IedaNSM.pdf: 5948604 bytes, checksum: dbf245a349dd04cff535e8ba2e89601d (MD5) Previous issue date: 2007-07-06<br>The aim of this work was to study a series of 11 different compositions of Ti-Zr binary alloys resistance to aggressive environment, i. e., their ability to keep their surface properties and mass when exposed to them as a way to evaluate their performance as biomaterials. The first stage was devoted to the fabrication of tablets from these alloys by Plasma-Skull casting method using a Discovery Plasma mach
APA, Harvard, Vancouver, ISO, and other styles
7

Okulov, Ilya. "Microstructure and mechanical properties of new composite structured Ti-based alloys." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-160897.

Full text
Abstract:
The demanding structural applications (e.g. aerospace, biomedical, etc.) require new materials with improved mechanical performance. The novel Ti-based dendrite + nano-/ultrafine-structured (Ti-based DNUS) composites exhibit an advantageous combination of high compressive strength (2000 – 2500 MPa) and large compressive ductility (10 – 30 %) already in the as-cast state [1,2] and, therefore, can be referred as high-performance materials. However, these Ti-based composites frequently exhibit very low or even lack of tensile ductility [3]. Therefore, the aim of this research work is to develop h
APA, Harvard, Vancouver, ISO, and other styles
8

Fabian, Robert. "The influence of microstructural features on the mechanical properties of Magsimal®-59." Thesis, Jönköping University, Tekniska Högskolan, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-51943.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, Hui-Ming, and 陳惠明. "The Microstructure of the As-Cast Ti-15Ta-15Nb Alloy." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/43489869126839366121.

Full text
Abstract:
碩士<br>國立屏東科技大學<br>機械工程系所<br>104<br>Recently, the new development of Titanium alloy on biomaterial field is focused on the Ti-Nb, Ti-Mo and Ti-Ta alloy systems. Based on the present studies, the tensile strength, yield strength, elongation and elastic modulus of the as-cast Ti-15Ta-15Nb alloy are 102ksi, 72ksi, 12%, 80GPa, respectively. The purposes of the present studies are to investigate the microstructures of the as-cast Ti-15Ta-15Nb alloy resulting to create the basic technology for the application of biomaterial. Some results are described as following: The microstructure of the prese
APA, Harvard, Vancouver, ISO, and other styles
10

Chang, Chia-Wei, and 張家維. "Microstructure and Properties of As-Cast 10-component nanostructured AlCoCrCuFeMoNiTiVZr High-Entropy Alloy." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/41884022454983132697.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "As-cast alloy microstructure"

1

Kaufman, J. Gilbert, and Elwin L. Rooy. Aluminum Alloy Castings. ASM International, 2004. http://dx.doi.org/10.31399/asm.tb.aacppa.9781627083355.

Full text
Abstract:
Aluminum Alloy Castings: Properties, Processes and Applications is a practical guide to the process, structure, property relationships associated with aluminum alloy castings and casting processes. It covers a wide range of casting methods, including variations of sand casting, permanent mold casting, and pressure die casting, showing how key process variables affect the microstructure, properties, and performance of cast aluminum parts. Other chapters provide similar information on the effects of alloying and heat treating and the influence and control of porosity and inclusions. A significan
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "As-cast alloy microstructure"

1

Zhang, Jin Shan, Yong Jun Xue, You Jun Guo, Chun Xiang Xu, and Wei Liang. "Effect of Si on As-Cast Microstructure in Quasicrystalline Al-Cu -Fe Alloy." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-432-4.619.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Li, Zhihui, Yongan Zhang, Baiqing Xiong, et al. "Investigation on Microstructure in As-Cast Aluminum Alloy 7136 and Its Evolution During Homogenization." In Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48764-9_162.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Zhihui, Yongan Zhang, Baiqing Xiong, et al. "Investigation on Microstructure in As-Cast Aluminum Alloy 7136 and Its Evolution during Homogenization." In PRICM. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118792148.ch162.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

You, Jun-hua, Cheng-liang Yang, QIU Ke-qiang, and Gui-xing Yang. "Effect of Si and Ca Additions on Microstructure of As-Cast Mg-Sn-Sr Alloy." In Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48764-9_153.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yang, Yan, and Xiaodong Peng. "Microstructure and Mechanical Behavior of As-Cast, Extruded and Nanocrystalline Mg-9Li-3Al-2.5Sr Alloy." In Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing. Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48764-9_164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jun-Hua, You, Yang Cheng-Liang, Qiu Ke-Qiang, and Yang Gui-Xing. "Effect of Si and Ca Additions on Microstructure of As-Cast Mg-Sn-Sr Alloy." In PRICM. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118792148.ch153.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yang, Yan, and Xiaodong Peng. "Microstructure and Mechanical Behavior of As-Cast, Extruded and Nanocrystalline Mg-9Li-3Al-2.5Sr Alloy." In PRICM. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118792148.ch164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kaiser, R., D. J. Browne, K. Williamson, and C. O'Brien. "Effects of Section Size And Cooling Rate on Microstructure and As-Cast Properties of Investment Cast CO-CR Biomedical Alloy." In Supplemental Proceedings. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118357002.ch41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ma, Yan Long, Fu Sheng Pan, Ru Lin Zuo, Jin Zhang, and Ming Bo Yang. "The Influence of Zinc and Zirconium on the Microstructure of the As-Cast Magnesium Alloy ZK60." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-432-4.369.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yang, Zhong, Jian Ping Li, Gao Hong Li, and Jueming Yang. "Effect of Antimony and Ce-Rich Mischmetal Additions on As-Cast Microstructure and Mechanical Properties of AZ91 Alloy." In Materials Science Forum. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-968-7.219.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "As-cast alloy microstructure"

1

Xu, Q. Y., W. M. Feng, and B. C. Liu. "3D Stochastic Modeling of As-Cast Microstructure for Aluminum Alloy Casting." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-32894.

Full text
Abstract:
A 3D stochastic modeling was carried out to simulate the dendritic grains during solidification process of aluminum alloy, including time-dependent calculations for temperature field, solute redistribution in liquid, curvature of the dendritic tip, and growth anisotropy. The nucleation process was calculated by continuous nucleation. A 3D simplified grain shape model was established to represent the equiaxed dendritic grain. Based on the Cellular Automaton method, a grain growth model was proposed to capture the neighbor cells of the nucleated cell. On growing, each grain continues to capture
APA, Harvard, Vancouver, ISO, and other styles
2

Bao-hong, Zhang, and Zhang Zhi-min. "Study on microstructure and mechanical properties of extruded as-cast AZ80 magnesium alloy." In 2011 International Conference on Consumer Electronics, Communications and Networks (CECNet). IEEE, 2011. http://dx.doi.org/10.1109/cecnet.2011.5768391.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Quan, Weibo Zhu, Aimin Jiang, and Bin Zeng. "Effects of Ce on As-cast and Extrusion Microstructure of ZM21 Magnesium Alloy." In 2015 4th International Conference on Mechatronics, Materials, Chemistry and Computer Engineering. Atlantis Press, 2015. http://dx.doi.org/10.2991/icmmcce-15.2015.437.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Baohong Zhang and Zhimin Zhang. "Influence of extrusion on microstructure and mechanical properties of as-cast AZ80 magnesium alloy." In 2011 International Conference on Remote Sensing, Environment and Transportation Engineering (RSETE). IEEE, 2011. http://dx.doi.org/10.1109/rsete.2011.5965736.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Senopati, Galih, Cahya Sutowo, I. Nyoman Gede P. A., Edy Priyanto Utomo, and M. Ikhlasul Amal. "Microstructure and mechanical properties of as-cast Ti-Mo-xCr alloy for biomedical application." In INTERNATIONAL SYMPOSIUM ON FRONTIER OF APPLIED PHYSICS (ISFAP) 2015. AIP Publishing LLC, 2016. http://dx.doi.org/10.1063/1.4941631.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jingchen, Z., and Y. Ping. "The Effect of Cooling Rate of Solidification on Microstructure and Alloy Element Segregation of AS Cast Alloy 718." In Superalloys. TMS, 2001. http://dx.doi.org/10.7449/2001/superalloys_2001_133_140.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yang, Yang, Kui Zhang, and Minglong Ma. "Effect of cooling speed on microstructure of as-cast Mg-3.7Zn-0.6RE quasi-crystal alloy." In 2015 International Conference on Materials, Environmental and Biological Engineering. Atlantis Press, 2015. http://dx.doi.org/10.2991/mebe-15.2015.235.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ma, Baichang, Jinwei Wang, Jixue Zhou, et al. "Effects of different Al contents on as-cast microstructure and properties of Mg-Al-Si-Sr alloy." In 2015 3rd International Conference on Advances in Energy and Environmental Science. Atlantis Press, 2015. http://dx.doi.org/10.2991/icaees-15.2015.44.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Karibeeran, Shanmuga Sundaram, Dhanalakshmi Sathishkumar, Balasubramanian Muthaih, and Sivakumar Palanivelu. "Effect of Reinforcement Type and Extrusion on the Microstructure and Mechanical Behavior of Al Alloy Composites." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-50113.

Full text
Abstract:
Aluminum based metal matrix composites offer greater potential for light weight, wear resistant and high temperature applications. Secondary processing like extrusion results in the improvement of strength and ductility of the as-cast composites. The objective of this research is to investigate the effect of reinforcement type and extrusion process on the microstructure and mechanical properties of the hot extruded Al2014 aluminum alloy. Two different composites were made by reinforcing the alloy with 10 wt.% SiC and 10 wt.% Si3N4 particles using stir casting method. The particles were electro
APA, Harvard, Vancouver, ISO, and other styles
10

McGhee, Paul, Devdas Pai, Sergey Yarmolenko, et al. "Directional-Tribological Investigation of Magnesium Alloys Under As-Cast and Hot Extrusion Conditions." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-51920.

Full text
Abstract:
In recent years, magnesium (Mg) and its alloy are being studied for their potential use in orthopedic implants with the novel ability to biodegrade after the implant serves its therapeutic function. Pure Mg, by itself, would not be suitable for use in a load-bearing implant application, due to its high corrosion rate and poor tribological properties. However, through proper alloying, this degradable metal is capable of achieving good mechanical properties reasonably similar to bone, a retarded rate of corrosion and enhanced biocompatibility. Previous studies have shown that alloying Mg with al
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "As-cast alloy microstructure"

1

Nyberg, Eric, Vineet Joshi, Curt Lavender, Dean Paxton, and Douglas Burkes. The Influence of Casting Conditions on the Microstructure of As-Cast U-10Mo Alloys: Characterization of the Casting Process Baseline. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1163444.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'As-cast alloy microstructure' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography