Log in

Relevant bibliographies by topics / AutoCAD® Software / Journal articles

To see the other types of publications on this topic, follow the link: AutoCAD® Software.

Journal articles on the topic 'AutoCAD® Software'

Author: Grafiati

Published: 4 June 2021

Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'AutoCAD® Software.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Santos, Anderson Gomes dos, Joab dos Santos Silva, and Kíssia Carvalho. "ENSINO DE GEOMETRIA A PARTIR DO SOFTWARE AUTOCAD / TEACHING GEOMETRY FROM AUTOCAD SOFTWARE." Brazilian Journal of Development 6, no. 9 (2020): 66609–18. http://dx.doi.org/10.34117/bjdv6n9-191.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Leitáo, V. "Complete autoCAD." Advances in Engineering Software 14, no. 1 (January 1992): 86–87. http://dx.doi.org/10.1016/0965-9978(92)90090-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Li, Fu Na, Lin Wei Yang, and Ying Zeng. "Research on Mechanical Product Development Based on CAD Software." Applied Mechanics and Materials 484-485 (January 2014): 933–37. http://dx.doi.org/10.4028/www.scientific.net/amm.484-485.933.

Full text

Abstract:

This paper introduces analysis the development process of CAD technology, application of the AutoCAD software in engineering field and teaching as well as the significance of the development of two times the. This paper analyzes in detail the development of common language, and the use of Visual BASIC development and application of software based on AutoCAD. The author elaborates the software interface design and method calls AutoCAD in VB. Finally, the design and implementation of a programming language re-development system based on AutoCAD is concerned. The test results show that the developed AutoCAD two development system has good practical value.

APA, Harvard, Vancouver, ISO, and other styles

4

Zhao, Li Jun, Feng Ri Li, and Wei Wei Jia. "The Application of AutoCAD Software in Forestry." Advanced Materials Research 605-607 (December 2012): 609–15. http://dx.doi.org/10.4028/www.scientific.net/amr.605-607.609.

Full text

Abstract:

AutoCAD is an accessorial desktop cartography software widely used in project cartography for its easy manipulation and data edit ability. GIS is a powerful tool of using computers to make dimensional with advantage of display, analysis, output and management of geographical data. The data of the two systems is not compatible and they need to be transformed for data sharing and application. This paper points out the difference of AutoCAD and GIS data, analyzes some common problems during the data transforming process and introduced the experimental study which takes example for transforming the CAD forestry map of Buyunshan country, Dalian city to ArcView geographical information system. The objective of this paper was trying to find an effective way for the transformation from CAD graphics files to geographical information system.

APA, Harvard, Vancouver, ISO, and other styles

5

Warchulski, Jacek, Marcin Warchulski, and Jan Szczurko. "Using of annotative styles in AutoCAD software." Mechanik 92, no. 7 (July 8, 2019): 465–67. http://dx.doi.org/10.17814/mechanik.2019.7.58.

Full text

Abstract:

The aim of this paper is taken attention the users to some AutoCAD functions that are permitted to effectively make technical documentation. In the paper there are discussed: rules of using annotative styles and methods of creating the technical documentation.

APA, Harvard, Vancouver, ISO, and other styles

6

Perez, M. M. "AutoCAD: The complete reference." Advances in Engineering Software 14, no. 3 (January 1992): 235. http://dx.doi.org/10.1016/0965-9978(92)90026-c.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

de Carvalho Neves, A. "AutoCAD: The complete reference." Advances in Engineering Software 15, no. 1 (January 1992): 75. http://dx.doi.org/10.1016/0965-9978(92)90052-h.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Dmitrieva, E. E., and E. V. Kalinova. "Integration of the rice field design software with AutoCAD Сivil 3D." Zemleustrojstvo, kadastr i monitoring zemel' (Land management, cadastre and land monitoring), no. 5 (April 19, 2021): 347–51. http://dx.doi.org/10.33920/sel-04-2105-04.

Full text

Abstract:

The article discusses the use of AutoCAD Civil 3D engineering system with the software for rice fields designing. The article contains the examples of graphic materials (rice field model) created in AutoCAD Civil 3D based on the design results in RIS software.

APA, Harvard, Vancouver, ISO, and other styles

9

Ma, Yun, and Shan Hong Zhu. "Architectural Design Using AutoCad and Sketchup." Applied Mechanics and Materials 556-562 (May 2014): 6379–82. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.6379.

Full text

Abstract:

Architectural design is a creative work, the final results of it is image and visually expressed in the form of drawings. AutoCad technology and Sketchup software combined with architecture design are the combination of computer application technology, especially the inevitable outcome of the development of computer graphics technology. Usage of the two softwares is not only able to design construction drawing with specification, beautiful buildings, and can effectively help designers improving the design level and work efficiently, this is the manual drawing. Mastering the AutoCad and SketchUp architectural drawings in other words is to have the advanced and standard of architectural design language tools.

APA, Harvard, Vancouver, ISO, and other styles

10

Liu, Gao Jun, Chun Hua Fu, Chun Wang, and Ying Hua Liao. "Software Tool Used for Transformer Design in AutoCAD Environment." Advanced Materials Research 706-708 (June 2013): 1963–66. http://dx.doi.org/10.4028/www.scientific.net/amr.706-708.1963.

Full text

Abstract:

The paper presents a software tool used for designing transformer in AutoCAD environment. The application allows the user to generate 2 serials of transformer easily. DSTool application has been developed using OpenDCL and VisualLISP environment and runs in the AutoCAD environment. The user can input some key parameters into the dialog provided by DSTool, more than 200 dwg files could be generated in 3 minutes.

APA, Harvard, Vancouver, ISO, and other styles

11

Ngoc, Minh Nguyen, Ping Cao, and Duc Thang Pham. "Establishment automatically contour blasting passport for tunnel in AutoCAD by VOLVN 3.0 software." E3S Web of Conferences 174 (2020): 01021. http://dx.doi.org/10.1051/e3sconf/202017401021.

Full text

Abstract:

The smooth blasting method has been researched, developed and strongly applied for long-term underground construction, such as principal mining excavations, tunnels and hydroelectric projects... with the main purpose of minimizing the explosion impact on rock and creating a well-shaped boundary. In this research, a software was developed to establish automatically the tunnel contour blasting passport in AutoCAD. Using the software in each blast design model, it is quickly possible to determine number of blastholes, specific charge, specific drilling and drawing automatically of blasting passport in AutoCAD. The interaction between the software and AutoCAD is a new and important factor that helps to complete an automatically closed cycle on computer from introducing parameters to designing blasting passport in AutoCAD, thereby contributing to increase efficiency of production and minimize risks in blasting works.

APA, Harvard, Vancouver, ISO, and other styles

12

Krzysiak, Zbigniew, Grzegorz Bartnik, Waldemar Samociuk, Janusz Zarajczyk, Jacek Wawrzosek, Marek Szmigielski, Jarosław Tatarczak, Józef Kowalczuk, and Leszek Krzywonos. "Application of AutoCAD software for ceramic pottery design." Mechanik, no. 2 (February 2015): 147/48. http://dx.doi.org/10.17814/mechanik.2015.2.70.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Ruki, Ulli Aulia, and Budi Setiawan. "Tahapan Teknik Menggambar Ragam Hias Nusantara dengan Program Komputer Autocad." Humaniora 4, no. 2 (October 31, 2013): 933. http://dx.doi.org/10.21512/humaniora.v4i2.3534.

Full text

Abstract:

Nowadays, technology has developed in many different disciplines. One of the technologies that have been used in design interior is AutoCAD software used in technical drawing. This AutoCAD software has been well-known by drafters. Advantages of this software are small period time of working, drawing with precisely measurement; and it is environmental friendly because it uses digital data that can reduce paper use. Drawing decorative ornament is one of difficulties that have been avoided by students to draw. Therefore the purpose of this article is to give information about steps of drawing decorative element using AutoCAD for their technical drawing in interior design. The article used literature study and website of professional institutions about AutoCAD as an additional source to be explanations about pattern of each ornament. Results of using this technique in AutoCAD will minimize time consuming, and it will help students draw the Indonesian archipelago decorative ornament.

APA, Harvard, Vancouver, ISO, and other styles

14

Baj-Rogowska, Anna. "AutoCAD: examination of factors influencing user adoption." Engineering Management in Production and Services 12, no. 1 (May 10, 2020): 45–56. http://dx.doi.org/10.2478/emj-2020-0004.

Full text

Abstract:

AbstractThe primary purpose of the research is to examine and validate determinants of user intention to use AutoCAD software, utilising the constructs from prior studies in a more integrated model. The paper proposes a revised Technology Acceptance Model (TAM) for measuring the adoption of AutoCAD. In the study, a latent construct PPA (perceived physical accessibility) was added to the proposed research model as a new determinant of AutoCAD adoption. An online survey of AutoCAD users was conducted to collect data. This data was empirically used to test the proposed research model. The Structural Equation Modelling (SEM) technique was used to evaluate the causal model, and the confirmatory factor analysis was performed to examine the reliability and validity of the measurement model. The study results show that user behavioural intention to use AutoCAD is significantly affected by three determinants: perceived usefulness, perceived ease of use and perceived physical accessibility of the software. This finding contributes to an expanded understanding of the factors that promote acceptance of AutoCAD software. Moreover, the main contribution of this study is to verify the impact of the added PPA variable on the behavioural intention to use and the actual use of AutoCAD, and also to create measurement scales for this new latent variable in TAM.

APA, Harvard, Vancouver, ISO, and other styles

15

Ma, Chun Yang, Chun Hua Ma, Dian Qing Chu, and Zhan Fa Yang. "AutoLISP Drawing Using the Second Development of AutoCAD." Advanced Materials Research 562-564 (August 2012): 993–96. http://dx.doi.org/10.4028/www.scientific.net/amr.562-564.993.

Full text

Abstract:

AutoCAD software is the most popular engineering graphics software today. It is a high performance general drawing platform and used by most of the engineering and technical person. In this paper, the second development of AutoCAD was used to analyze and discuss.

APA, Harvard, Vancouver, ISO, and other styles

16

Chen, Yan, Yi Jun Xiong, and Rong Zhang. "Drawing Threaded Programs with AutoCAD Secondary Development." Applied Mechanics and Materials 539 (July 2014): 59–61. http://dx.doi.org/10.4028/www.scientific.net/amm.539.59.

Full text

Abstract:

AutoCAD is a drawing software is widely used in various industries. AutoLISP language embedded in AutoCAD software is one of many AutoCAD development tools and used very widely in the world. In this paper, AutoLISP will be used to develop a new program for drawing thread. We will draw a variety of internal and external thread and add center sign rapidly and accurately. New source program will be provided and is very meaningful and useful to the user.

APA, Harvard, Vancouver, ISO, and other styles

17

Li, Wei. "Architectural Design with Autocad." Advanced Materials Research 926-930 (May 2014): 1692–95. http://dx.doi.org/10.4028/www.scientific.net/amr.926-930.1692.

Full text

Abstract:

Architectural design is a creative work, the final results of it is image and visually expressed in the form of drawings. AutoCad technology and architecture design are the combination of computer application technology, especially the inevitable outcome of the development of computer graphics technology. Usage this software is not only able to design construction drawing with specification, beautiful buildings, and can effectively help designers improving the design level and work efficiently, this is the manual drawing. Mastering the AutoCad architectural drawings in other words is to have the advanced and standard of architectural design language tools.

APA, Harvard, Vancouver, ISO, and other styles

18

Hadiwidodo, Yoyok Setyo, Sholihin Sholihin, Handayanu Handayanu, Imam Rochani, Nur Syahroni, Herman Pratikno, and Madi Madi. "AUTOVID (AutoCAD Covid-19): Sebuah Media Pelatihan Software AutoCAD Secara Online untuk Masyarakat Terdampak Covid-19." SEWAGATI 4, no. 3 (December 1, 2020): 183. http://dx.doi.org/10.12962/j26139960.v4i3.7447.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Thuanthong, Toonlanat, and Paiwan Sudwan. "Sex determination in Northern Thai from crania by using computer-aided design software and conventional caliper methods." Asian Biomedicine 12, no. 3 (September 20, 2019): 103–10. http://dx.doi.org/10.1515/abm-2019-0008.

Full text

Abstract:

AbstractBackgroundIdentification of sex from skeletal remains is an essential step in forensic anthropology. The skull is the second choice, after the pelvis, to estimate sex by osteometric methods.ObjectiveTo evaluate the process of identification of sex in Northern Thai from crania by using computer-aided design (AutoCAD) software and conventional caliper methods.MethodsDry skulls of 86 men and 74 women were examined. AutoCAD software and digital calipers were used to measure dimensions. Eleven of the 15 parameters were created for this study.ResultsMen are significantly larger than women in all parameters, except in the nasospinale–prosthion measurement. There were no significant differences in the intraobserver error test and between the AutoCAD and digital caliper measurements. The logistic regression analysis yielded a sex classification accuracy rate of 92.9% in men, 93.4% in women, and 93.1% of overall accuracy for AutoCAD software. When using digital calipers, there was an accuracy rate of 89.3% in men, 94.7% in women, and 91.9% for overall accuracy.ConclusionsAutoCAD software is a reliable method to predict the sex and provide high accuracy in sex determination from crania.

APA, Harvard, Vancouver, ISO, and other styles

20

Guo, Xiao Ping, Wei Zheng, and Yi Chao Wu. "The Application of VB Matlab and AutoCAD in IC Engine Optimization Design." Applied Mechanics and Materials 543-547 (March 2014): 1951–54. http://dx.doi.org/10.4028/www.scientific.net/amm.543-547.1951.

Full text

Abstract:

Estimating the advantages and disadvantages of Matlab/Simulink, Visual Basic (VB) and AutoCAD software, the model of the working process of internal combustion (IC) engine was built based on Matlab/Simulink, and the drawing programs for engine structure were written with the parametric design language AutoLISP. A user-friendly VB interface of inputting parameter was established, realizing VB coupled with AutoCAD and Matlab/Simulink software. Calling the AutoLISP drawing program nested in the AutoCAD and Matlab/Simulink software via VB, integration of the simulation and analysis of the engine and the CAD drawing of its body can be achieved. Its more efficient to analyze the performance and optimize the structure parameters of engines.

APA, Harvard, Vancouver, ISO, and other styles

21

Warchulski, Jacek, and Marcin Warchulski. "Process automatization of creating aerofoil shape in AutoCAD software." Mechanik 90, no. 7 (July 10, 2017): 609–11. http://dx.doi.org/10.17814/mechanik.2017.7.88.

Full text

Abstract:

Possibilities of using of CAx systems to automation process of graphical tasks are presented. Possibility of using AutoLISP language with VisualLISP environment to create aerofoil shape in CAx system are analysed.

APA, Harvard, Vancouver, ISO, and other styles

22

Warchulski, Jacek, and Marcin Warchulski. "Process automatization of creating 3D objects in AutoCAD software." Mechanik 91, no. 7 (July 9, 2018): 564–66. http://dx.doi.org/10.17814/mechanik.2018.7.85.

Full text

Abstract:

In this paper possibilities of using of CAx systems to automation process of graphical tasks are presented. Possibility of using Delphi language with OLE technology to creating 3D objects in CAx system are analysed.

APA, Harvard, Vancouver, ISO, and other styles

23

Warchulski, Jacek, and Marcin Warchulski. "Process automatization of using blocks with attributes in autocad software." Mechanik, no. 7 (July 2016): 862–63. http://dx.doi.org/10.17814/mechanik.2016.7.209.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Amangeldiyeva, Arailym Ardakkyzy, and Altynai Tulparovna Kishubayeva. "USING AUTOCAD AUTODESK AND AUTODESK INVENTOR GRAPHIC EDITORS AS DESIGN TOOLS IN 3D CAD." Vestnik of Astrakhan State Technical University 2021, no. 1 (May 31, 2021): 7–14. http://dx.doi.org/10.24143/1812-9498-2021-1-7-14.

Full text

Abstract:

Initially, the computers and software were supposed to complement the engineer’s traditional techniques, replacing the drawing board and calculator. Today, the computers with spe-cialized software almost completely replace the traditional methods. There is given an overview of the graphic editors AutoCAD Autodesk and Autodesk Inventor, possibilities of performing designs in three-dimensional space using parametric modeling. The advantages and disadvantages of each program are analyzed. An example of using AutoCAD Autodesk and Autodesk Inventor for computer visualization of a 3D object is given. To evaluate the work in both programs, 13 users were involved, who noted the ease of mastering AutoCAD Autodesk, which is important for the young engineers, as well as for the students.

APA, Harvard, Vancouver, ISO, and other styles

25

Wei, Xiang, Hu Jun He, and Wan Ling Li. "Rapid Realization of Mine Survey Mapping Based on AutoCAD." Advanced Materials Research 505 (April 2012): 146–48. http://dx.doi.org/10.4028/www.scientific.net/amr.505.146.

Full text

Abstract:

Analyzing the advantages and disadvantages of mine survey mapping by manual way and development software way, according to large workload and low efficiency of mapping by hand and existing problems of most automatic mapping softwares now, combining the characteristic of vector mine-map, the author carries through secondary development of AutoCAD to realize mine automatic mapping directly using station points coordinates based on the connection of VB program technology and Excel database by high-grade language. Thus it reduces working procedures of mapping by hand as well as improves efficiency of mapping.

APA, Harvard, Vancouver, ISO, and other styles

26

Wang, Cheng, Bao Kun Yang, Xiong Wei Yang, and Gui Rong Yan. "Using Software Engineering to Guide Commercial CAD Software Secondary Development." Advanced Materials Research 201-203 (February 2011): 59–62. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.59.

Full text

Abstract:

Effective secondary development is the key process for CAD application. But as a cross-disciplinary problem and new software development mode, secondary development based on commercial CAD software has new features compared with complete independent software development. From angle of software engineering, this paper summarizes demand of software engineering, standards to observe, software development flow, configuration of development team in the process of commercial CAD software secondary development. Finally, this paper presents the case of secondary development of AutoCAD standard base parametric system to illustrate the specific application of software engineering in detail.

APA, Harvard, Vancouver, ISO, and other styles

27

Montejo Cabrera, Manuel, and Yenisleidy Herrera Cotera. "MANUAL PARA EL DISEÑO AUTOMATIZADO DE REDES DE ALCANTARILLADO UTILIZANDO EL SOFTWARE ESPECIALIZADO AUTOCAD CIVIL 3D." REVISTA CIENTIFICA EPISTEMIA 3, no. 2 (September 26, 2019): 12–21. http://dx.doi.org/10.26495/re.v1i2.1118.

Full text

Abstract:

Las tendencias Actualmente en las Empresas de Diseño de la provincia de Ciego de Ávila, Cuba existe un déficit en el uso de las técnicas más modernas de diseño, un ejemplo de estas, es el software especializado AutoCAD Civil 3D que constituye una poderosa herramienta para la proyección de obras civiles con mayor rapidez y exactitud. Partiendo de los problemas generados por el insuficiente manejo y uso del software AutoCAD Civil 3D en el diseño de redes de alcantarillado en la provincia de Ciego de Ávila, el cual limita la productividad y calidad de los proyectos, se realizó un trabajo investigativo que propone un manual para el diseño automatizado de las redes de alcantarillado utilizando el referido software. El manual propuesto tiene como premisa fundamental el uso del AutoCAD Civil 3D para el diseño de redes de alcantarillado, lo que permite una mejor preparación técnica de los proyectistas y por consiguiente una mayor productividad y calidad en los proyectos. Para la elaboración del manual se tuvieron en cuenta las normas cubanas y regulaciones establecidas para proyectos de redes de alcantarillado. Abstract The trends Currently in the Design Companies of the province of Ciego de Ávila, Cuba there is a deficit in the use of the most modern design techniques, an example of these, is the specialized AutoCAD Civil 3D software that constitutes a powerful tool for the projection of civil works more quickly and accurately. Starting from the problems generated by the insufficient management and use of the AutoCAD Civil 3D software in the design of sewerage networks in the province of Ciego de Ávila, which limits the productivity and quality of the projects, a research work was carried out that proposes a manual for the automated design of sewer networks using the aforementioned software. The proposed manual has as its fundamental premise the use of AutoCAD Civil 3D for the design of sewerage networks, which allows a better technical preparation of the designers and therefore a greater productivity and quality in the projects. For the preparation of the manual, the Cuban norms and regulations established for sewage network projects were taken into account.

APA, Harvard, Vancouver, ISO, and other styles

28

Di, Fei. "CNC Processing of Nurbs Curve Based on AutoCAD." Advanced Materials Research 1016 (August 2014): 167–71. http://dx.doi.org/10.4028/www.scientific.net/amr.1016.167.

Full text

Abstract:

In this paper, firstly the characteristics and discrete mathematics method of Nurbs curve were studied in-depth, and a NC processing method based on De Boor-Cox algorithm was presented. Then, dedicated data-processing software for NC system was developed with VC++ 6.0. This software has been well applied in practice production, and the production efficiency is improved as well.

APA, Harvard, Vancouver, ISO, and other styles

29

Akhmadi, Amin Nur. "DESAIN GAMBAR ALAT PELEPAS BAN SEPEDA MOTOR DENGAN SOFTWARE AUTOCAD." SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin 13, no. 1 (June 1, 2019): 38. http://dx.doi.org/10.24853/sintek.13.1.38-43.

Full text

Abstract:

The development of science and technology covers all fields and has a huge impact on society. Technology demands will bring people to think of creating something new. One of the human creations that is an important part of human life is machines, these machines have many models, shapes and benefits, one of which is a motor vehicle tire removal and installation machine, in general the motorized tire removal and installation machines are widely used in small and medium enterprises, the main drivers are usually using air pressure or pneumatics. The objective to be achieved in this research is to realize the design of a motorcycle tire release tool with the AutoCAD 2012 software. By designing a drawing design to release a motorcycle tire, and a tool support frame. The Planning Stage by determining the title and subject matter and software needed and then making the plot, the implementation phase begins to determine the frame design, then designs the framework and documents the activities carried out during the research. Checking the validity of the data Checking the validity of the data is done by displaying the results of the design of motorcycle tire release machines in accordance with the research plan. Analysis of research data is by collecting data, reducing data, presenting data. Preparation of this stage report all documentation collected and compiled into a research report. The design results are chuck, bottom frame, release hook arm, release hook, release device design with installed wheels, conclusions Concave wheel rim clamp has three sides that serve to clamp to all sides of the rim, each clamping clamp has a stretch setting on each side.

APA, Harvard, Vancouver, ISO, and other styles

30

Hussein Ali, Sabah. "Spatial Georeferencing of the AutoCAD Map by Using GIS Software." JOURNAL OF EDUCATION AND SCIENCE 22, no. 3 (September 1, 2009): 75–91. http://dx.doi.org/10.33899/edusj.2009.57759.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Senagala, Mahesh. "Deconstructing the Software Interface: A Critical Close Reading of AutoCAD." International Journal of Architectural Computing 2, no. 3 (September 2004): 299–314. http://dx.doi.org/10.1260/1478077043505423.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Weng, Wei-Chu, and Hsin-Chuan Kuo. "Irregular stock cutting system based on AutoCAD." Advances in Engineering Software 42, no. 9 (September 2011): 634–43. http://dx.doi.org/10.1016/j.advengsoft.2011.04.009.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Карпюк, Л. В., and Н. О. Давіденко. "Modeling in AUTOCAD for bachelors." ВІСНИК СХІДНОУКРАЇНСЬКОГО НАЦІОНАЛЬНОГО УНІВЕРСИТЕТУ імені Володимира Даля, no. 1(265) (March 16, 2021): 25–28. http://dx.doi.org/10.33216/1998-7927-2021-265-1-25-28.

Full text

Abstract:

The article discusses the methods of using the AutoCad graphic editor for creating three-dimensional objects. The possibilities of three-dimensional modeling in the AutoCad graphic editor for optimizing the educational process of bachelors of technical specialties are also considered. The article analyzes the best ways to create mechanical engineering drawings.The most developed software tool for the production of design documentation is AutoCAD - a universal graphic design system. Creating models of any complexity in space by using this graphic editor, the user will be able to see their relative position, estimate the distance between them. The model can be freely moved in space, viewing many options. The ability to control the point of view allows to conveniently select the view of the 3D model that is being developed. Zooming, panning in real time with the ability to freely rotate the camera around the model provide the ability to quickly view objects from any point of view. The article provides examples of choosing the most optimal option for creating a three-dimensional model. The traditional way to create a 3D model drawing is to make 2D views of the model. When creating a flat drawing, there is a possibility of error when making projections, since they are created independently from each other and consist of several images. It is rather difficult to represent an object in space from a flat drawing. At present, modern software graphic editors are aimed at creating three-dimensional models that allow to create realistic models and, on their basis, get two-dimensional projections. Graphic editor AutoCad allows to create three-dimensional objects based on standard commands, in the form of a cylinder, cone, box, torus, etc., when editing which you can get the desired shapes. After creating a three-dimensional model, the user can get its two-dimensional projections not only on the main planes, but also on any plane at will. The 3D modeling method allows you to create a complex drawing with any number of images based on a 3D model. There are ways to create 2D plane drawings from a 3D model and the ability to edit ready-made designs that can be inserted from model space into paper space. Editing takes place by changing the parameters of a 3D object in model space, and these changes are automatically reflected in paper space. This method allows us to use the tools to quickly create a system of 3-4 linked views for a 3D AutoCad model.

APA, Harvard, Vancouver, ISO, and other styles

34

Vitri, Gusni, and Sularno Sularno. "ASESMEN TINGKAT KEMAMPUAN MAHASISWA MENGGUNAKAN SOFTWARE AUTOCAD PADA MATA KULIAH MENGGAMBAR TEKNIK." Jurnal Teknologi Dan Sistem Informasi Bisnis 2, no. 1 (January 31, 2020): 69–73. http://dx.doi.org/10.47233/jteksis.v2i1.107.

Full text

Abstract:

Teknik Sipil merupakan salah satu ilmu terapan, mencakup teknologi merancang, membangun, dan memelihara serta memperbaiki bangunan. Mahasiswa di tuntut untuk memahami materi pembelajaran secara teori dan praktek. Salah satu mata kuliah yang harus di kuasai oleh mahasiswa adalah menggambar teknik. Program Studi Teknik Sipil Universitas Dharma Andalas menerapkan mata kuliah menggambar teknik dengan sesi tatap muka kuliah, tugas menggambar secara manual, serta praktikum di laboratorium komputer dengan mengajarkan program AutoCAD. Penelitian ini merupakan penelitian deskriptif kuantitatif dengan metode pengumpulan data secara kuisioner. Mahasiswa yang mengisi kuisioner adalah mahasiswa aktif yang sudah mengambil mata kuliah menggambar teknik yang terdiri dari 4 (empat) angkatan. Mahasiswa yang mengisi kuisioner sebanyak 76%, dan keseluruhan mahasiswa menyelesaikan praktikum dan tugas menggambar teknik serta seluruhnya setuju bahwa kemampuan dalam ilmu menggambar teknik harus dikuasai oleh lulusan teknik sipil. Mahasiswa yang mempunyai Komputer/Laptop pribadi untuk belajar program sebanyak 93%. Tingkat penguasaan kemampuan dasar-dasar program AutoCAD sudah di pahami lebih dari 50% mahasiswa dimana mahasiswa Sangat paham 18,91%, Paham 44,70%. Sedangkan untuk kemampuan modifikasi gambar, Sangat paham 10,25%, Paham 51,75%. Seluruh mahasiswa mampu menyelesaikan tugas menggambar teknik dan dapat disimpulkan bahwa mahasiswa pada umumnya sudah menguasai program AutoCAD (jumlahnya di atas 50%), namun butuh beberapa penyesuaian metode pembelajaran.

APA, Harvard, Vancouver, ISO, and other styles

35

Hamdani, Hamdani, Doni Tri Putra Yanto, and Ricky Maulana. "Validitas Modul Tutorial Gambar Teknik dan Listrik dengan Autocad." INVOTEK: Jurnal Inovasi Vokasional dan Teknologi 19, no. 2 (October 30, 2019): 83–92. http://dx.doi.org/10.24036/invotek.v19i2.491.

Full text

Abstract:

Gambar Teknik dan Listrik merupakan salah satu mata kuliah wajib yang harus dipelajari oleh mahasiswa . Dalam pelaksanaan pembelajaran mata kuliah ini masih dilakukan secara manual yaitu menggunakan pensil dan kertas gambar. Namun era komputerisasi sekarang pembelajaran Gambar Teknik dan Listrik perlu diimbangi dengan kemajuan zaman. Salah satunya menggunakan software AutoCAD dalam menyelesaikan materi gambar yang ada. Oleh karena itu, butuh pengembangan bahan ajar modul dengan tutorial bisa membantu untuk memahami penggunaan software dalam menyelesaikan materi. Penelitian ini bertujuan untuk mengetahui validitas modul tutorial Gambar dan Teknik dengan AutoCAD yang telah dikembangkan. Data penelitian diperoleh dari analisis angket uji validitas oleh validator yang terdiri 2 orang ahli materi dan media. Hasil uji validitas modul tutorial AutoCAD yang dinilai validator memperoleh nilai rata –rata 111 untuk ahli materi pada kategori valid sedangkan untuk ahli media mencapai nilai rata rata skor 120 dengan kategori sangat valid.

APA, Harvard, Vancouver, ISO, and other styles

36

Madi, Madi, Yoyok Setyo Hadiwidodo, Tuswan Tuswan, and Abdi Ismail. "Analisis Tingkat Kepuasan Peserta Pelatihan AutoCAD Online untuk Pengabdian Masyarakat Terdampak Covid-19 dengan Metode Kirkpatrick Level I." Jurnal Pengabdian Pada Masyarakat 5, no. 4 (November 30, 2020): 1065–76. http://dx.doi.org/10.30653/002.202054.689.

Full text

Abstract:

SATISFACTION LEVEL ANALYSIS OF AUTOCAD ONLINE TRAINING PARTICIPANTS FOR COMMUNITY SERVICE AFFECTED BY COVID-19 USING KIRKPATRICK LEVEL I METHOD. Online AutoCAD training is an activity to learn modelling techniques using AutoCAD software for participants affected by Covid-19. Online AutoCAD training was held to increase people's productivity during the pandemic, increase knowledge, and develop modelling ability using AutoCAD software. The number of participants registered to join this program was 49 participants from open recruitment which consisted of 59% male participants and 41% female participants. The program ran for four meetings online, each session 1.5 hours with a system of introduction, learning, assignments, and exams. The service team also provides free facilitators, facilities, presenters and materials (F2PM) for training participants. So, to find out participants' satisfaction, it is necessary to conduct an evaluation at the end of the training. The review was carried out by means of an online survey to the participants, then processed qualitatively with the Kirkpatrick Level I method. The final result of the participant evaluation of the facilitator was considered acceptable (59%), the facilities were considered excellent (67%), the presenters were considered very good (56 %), and the material is considered very good (59%). In the future, evaluation data on the level of participant satisfaction can be used as a recommendation and motivation to organize advanced training.

APA, Harvard, Vancouver, ISO, and other styles

37

Afanasyev, O., and I. Zavada. "THEORETICAL ASPECTS OF DIGITAL CREATION TOPOGRAPHIC PLAN." Municipal economy of cities 3, no. 163 (June 29, 2021): 30–34. http://dx.doi.org/10.33042/2522-1809-2021-3-163-30-34.

Full text

Abstract:

Theoretical bases of creation of the digital topographic plan of district are considered, the analysis of the materials used for creation of the digital topographic plan of district is carried out. Types and features of application of topographic plans are analyzed. The most suitable geo-basis for creating a digital plan has been identified. Studies have shown that a 1: 500 scale geo-base is quite informative and most optimal for creating digital and conventional topographic plans in the city. Without additional removal, 1: 500 scale plans allow for the transition to smaller scale plans. According to current national regulations, a single coordinate and altitude system should be used to create topographic plans. Today, the only state coordinate system USK-2000 is used, which replaced the coordinate system SK-42, which is based on the Krasovsky ellipsoid and the Gauss-Krueger projection. Possibilities of development of electronic topographic plans with use of modern software complexes are investigated. Computer software allows you to process data as accurately as possible and perform tasks quickly. Among the main software packages used to create an electronic topographic plan of the area are AutoCAD, Digitals, Geonics, COMPASS, MapInfo Pro, Topocad. The choice of software product depends on the breadth of the task, the modernity of surveying instruments and their own software. An analysis of the software used in the creation of digital maps and topographic plans, which showed that the choice of a particular product depends on the breadth of the task, the modernity of surveying instruments and their own software. AutoCAD software is universal and fully adapted to modern geodetic problems. The use of AutoCAD software will ensure the final processing of data obtained during field work and the completion of the digital topographic plan of the area. The procedure for creating a digital topographic plan of the area using Digitals and AutoCAD software is considered. Creating a digital topographic plan of the area is a complex process consisting of several stages, which are described in the article.

APA, Harvard, Vancouver, ISO, and other styles

38

Guo, Ming Zhu, Feng Xian Zhao, and Ya Kun Wang. "A Method to Establish 3-D Finite Element Geological Model Based on DEM Data." Applied Mechanics and Materials 722 (December 2014): 308–11. http://dx.doi.org/10.4028/www.scientific.net/amm.722.308.

Full text

Abstract:

This paper introduces a methodology for creating geometrically of real terrain based on DEM data, which provided by the international scientific data sharing center.The method is to convert the DEM data in Global Mapper, AutoCAD and other softwares, process batch of data using office software, based on APDL language programming in ANSYS software , so as to realize the real remote sensing data to establish 3-D geological model in finite element software. An example illustrates the capabilities of the proposed methodology in this paper.

APA, Harvard, Vancouver, ISO, and other styles

39

Singh, R., and G. S. Sekhon. "Design and application of hybrid software for modelling die components and the die assembly." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 217, no. 2 (February 1, 2003): 235–50. http://dx.doi.org/10.1243/095440503321148876.

Full text

Abstract:

This paper describes the design and application of hybrid modelling software for assisting die designers working in small and medium-sized sheet metal enterprises. The proposed procedure utilizes AutoLISP and AutoCAD for fast modelling of die components and the die assembly. The proposed die modelling software AUDIEDR comprises seven modules, namely DIEMOD, STRPRMOD, BPPPPMOD, BDSTMOD, TDSTMOD, BDIEASS and TDIEASS. The interfacing of AutoLISP with AutoCAD facilitates automatic drafting of die components and the die assembly. The software is written in AutoLISP and is loaded in the prompt area of AutoCAD. The program allows the user firstly to model the blank drawing. It then prompts the user to pick pregenerated data files for each die component and automatically models the die components and the die assembly using the above-mentioned modules sequentially. The chief feature of the software is its facility of interfacing die design with drafting. The software can be operated in a Windows environment on a PC/AT. An illustrative example has been included to demonstrate the usefulness of the proposed system. The software also helps create a library of die components. The modelling system can be modified depending upon the requirements of the specific shop floor. The low cost of the system makes it affordable for planners working in small and medium-sized enterprises.

APA, Harvard, Vancouver, ISO, and other styles

40

Li, Li, Zhao Yun Wu, Li Hui Wu, and Nan Bo Liu. "Research on Information Processing Technology of Title Bar for AutoCAD/ERP Integration." Applied Mechanics and Materials 423-426 (September 2013): 2716–19. http://dx.doi.org/10.4028/www.scientific.net/amm.423-426.2716.

Full text

Abstract:

In order to solve the data interaction problem of title bar between the AutoCAD and ERP system, the information processing technology of title bar for the AutoCAD/ERP integration was put forward. The overall principle of technology was analyzed, and some key technologies and methods were studied, including the technology of identifying and extracting the data, the data integration method with ERP, the design principle of the drawing number generator, the technology of filling information into title bar, etc. Based on these, the information processing software of title bar was developed by VB. It could make the information of title bar rapidly transfer between AutoCAD and ERP.

APA, Harvard, Vancouver, ISO, and other styles

41

Mwinuka, Tito E., and Beda M. Mutagahywa. "2D AutoCAD Geometric Data Extraction and Post- Processing for Numerical Control." Tanzania Journal of Engineering and Technology 34, no. 1 (June 30, 2013): 44–54. http://dx.doi.org/10.52339/tjet.v34i1.458.

Full text

Abstract:

In this paper, a method of extracting 2D geometric data from AutoCAD drawing and post- processing for Numerical Control (NC) is presented. Geometric data already available in the Drawing Interchange Files (DXF) can be utilized to accurately and economically prepare part programs for controlling NC/CNC machine tools. AutoCAD, being generalpurpose software, stores its geometric data in a form that cannot be directly applied for automatic generation of Numerical Control (NC) codes. The way around the discrepancy between the structure of a drawing database (DXF files) and the information requirement for part programming is addressed in this work. NC programming of a test componentdrawn in AutoCAD is also presented.

APA, Harvard, Vancouver, ISO, and other styles

42

Warchulski, Jacek, and Marcin Warchulski. "Use of AutoCAD software to generate the shape of the anti-aircraft missile." Mechanik, no. 7 (July 2015): 569/931–569/942. http://dx.doi.org/10.17814/mechanik.2015.7.314.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Li, Yu He, Peng Xu, and Xin Li Bai. "Computer Aided Design Based on Visual FORTRAN and AutoCAD." Advanced Materials Research 628 (December 2012): 245–48. http://dx.doi.org/10.4028/www.scientific.net/amr.628.245.

Full text

Abstract:

Aimed at disadvantages of tedious work of the gear teeth design, Visual Fortran is taken as the development platform, and design data are stored and managed by self-developed program and database technology. A CAD System for Gear Teeth named GTCS is researched and developed. The system integrates designing and drawing in a body, and fully uses the powerful numerical calculation function of Visual Fortran and the function of Windows interface design, as well as the secondary development function of AutoCAD and database technology, etc. The software can realize designing and calculating of involute gear teeth and transmission mechanism, automatic drawing and various kinds of results post-processing. Results show that the research results greatly improved the efficiency and quality of the design. The result documents are easily accessible by other structural analysis software (such as SolidWorks, ANSYS, ADINA, etc) and similar design software, and convenient to use for the follow-up work.

APA, Harvard, Vancouver, ISO, and other styles

44

He, Fa Wei. "Accurate Modeling for Plate Cam with Autocad and other Software Combined." Applied Mechanics and Materials 246-247 (December 2012): 1237–40. http://dx.doi.org/10.4028/www.scientific.net/amm.246-247.1237.

Full text

Abstract:

For three-dimensional modeling of cam profile, we can draw the cam profile firstly, and then stretch it to form a three-dimensional graphic. When drawing, the difficulties exist in how to draw the two-dimensional graphic rapidly and accurately. Accurate calculations can be done with Excel. It will be a very good method to insert data to AutoCAD with required format to form the graphics. After forming the two-dimensional graphics, three-dimensional graphics can be done after several procedures. It is much significant for accurate drawing and CNC automatic programming processing for cam profile, and get high-accuracy plate cam.

APA, Harvard, Vancouver, ISO, and other styles

45

Yong, S. de, Y. Kusumarini, and P. E. D. Tedjokoesoemo. "Interior design students’ perception for AutoCAD, SketchUp and Rhinoceros software usability." IOP Conference Series: Earth and Environmental Science 490 (June 10, 2020): 012015. http://dx.doi.org/10.1088/1755-1315/490/1/012015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

LI, Shuting. "1209 Development of Gear Design and Drawing Software Based on AutoCAD." Proceedings of the Symposium on Motion and Power Transmission 2013 (2013): 228–32. http://dx.doi.org/10.1299/jsmempt.2013.228.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Cai, Fei, Ning Ding, and Jian Cui. "Research on Total Station Data Extraction and Transmission System Based on AutoCAD." Applied Mechanics and Materials 170-173 (May 2012): 3316–19. http://dx.doi.org/10.4028/www.scientific.net/amm.170-173.3316.

Full text

Abstract:

In order to improve the efficiency of measurement, total station data extraction and transmission system based on AutoCAD is designed and implemented by the secondary development of AutoCAD software in the paper. The system is composed by communication module, data conversion module, point-plotting module. The system connects with the total station and collects automatically data to extract useful data form initial data, then automatically calculates and stores the coordinates, taking Visual Basic.NET as the development platform to realize AutoCAD-based plotting and mapping. Test results show the system realizes the integration of internal and field operation and can reduce the workload of manual editing and error rate, so as to improve the efficiency of internal operation for measurement.

APA, Harvard, Vancouver, ISO, and other styles

48

Li, Dan. "Improvement Method about Design Norms’ Implementation Based on AutoCAD 2007." Advanced Materials Research 243-249 (May 2011): 6212–15. http://dx.doi.org/10.4028/www.scientific.net/amr.243-249.6212.

Full text

Abstract:

The secondary development under the environment of above the version of AutoCAD 2005 is that the design norms of highway project as the custom menu are added into help document library of AutoCAD. Then project planner can quickly find what they need through searching the corresponding electronic norms, which can increase productivity. In this paper, AutoCAD2007 is implemented as an example to introduce the idea of developing help document, the detail scheme and software instructions.

APA, Harvard, Vancouver, ISO, and other styles

49

Liu, Xing Quan, and Miao Tang. "Xdata of AutoCAD and its Application in Planning Approval." Applied Mechanics and Materials 263-266 (December 2012): 1916–20. http://dx.doi.org/10.4028/www.scientific.net/amm.263-266.1916.

Full text

Abstract:

AutoCAD is a wildly used software in kinds of industries, while the depth of its’ applications is limited by its weakness on attribute data management. This paper commences with the introduction of AutoCAD xdata, discusses the way to input, output and modify the xdata, and represents the key code in C#. Finally, this paper probes into both the application process and application characteristics of xdata by demonstrating the example of planning approval.

APA, Harvard, Vancouver, ISO, and other styles

50

Liang, Jian, and Zong Ke Lou. "The Intersection Method: A New Approach on the Concrete Aggregate Model." Advanced Materials Research 163-167 (December 2010): 1053–57. http://dx.doi.org/10.4028/www.scientific.net/amr.163-167.1053.

Full text

Abstract:

In order to study the meso-structure of concrete deeply, this paper proposes a new approach—intersection method, which is much simpler and more applicable to check the interference for wide varieties of shape aggregate by using the VBA language built-in AUTOCAD. Results show that the procedure to establish the model of concrete aggregate is user-friendly, simple, intuitive and precise. It can be analyzed through introducing into finite element software for the further numerical study of macro and micro mechanical properties of concrete by using the mutual files SAT which is used to exchange the CAD data between AUTOCAD and other software.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!