Relevant bibliographies by topics / Autodesk Inventor 2008

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Autodesk Inventor 2008'

Author: Grafiati
Published: 4 June 2021
Last updated: 29 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Autodesk Inventor 2008.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Autodesk Inventor 2008"

1

Satrio Utomo, Ilham, and Rangga Arya Fachreza. "DESAIN ALAT BONGKAR PASANG COWHANGER PADA LOKOMOTIF DENGAN PENGGERAK ULIR." Jurnal Penelitian Sekolah Tinggi Transportasi Darat 12, no. 2 (2022): 25–34. http://dx.doi.org/10.55511/jpsttd.v12i2.588.

Full text
Abstract:
Bongkar pasang cowhanger saat ini masih dilakukan dengan cara manual yaitu dengan cara mengganjal cowhanger dengan balok-balok di atas rel. Untuk pemindahan cowhanger masih dengan cara manual yakni diangkat menggunakan tangan yang tentu saja beresiko bagi pekerja. Penelitian ini bertujuan untuk melakukan desain serta perhitungan kekutan pada alat bantu bongkar pasang cowhanger. Software yang digunalan dalam penelitian ini dengan Autodesk Inventor 2017. Hasil simulasi menunjukkan alat ini bisa menerima beban maksimal sebesar 2000 N serta tegangan terbesarnya adalah 1,596 Mpa dan tegangan terkec
APA, Harvard, Vancouver, ISO, and other styles
2

Mohd, A., C. Hindle, and W. A. Y. Yusoff. "Mould Filling and Pressure Distribution for Polymer Resins." Advanced Materials Research 264-265 (June 2011): 771–76. http://dx.doi.org/10.4028/www.scientific.net/amr.264-265.771.

Full text
Abstract:
The application of simulation software packages for mould design and injection moulding process is becoming importance to optimizing the moulding quality and satisfy market needs. This paper presents the simulation of mould filling and packing for various polymer resin types. The filling and packing pressure phases for different type of polymer resins as well as the flow behaviour of molten resin in the mould cavity were investigated. Three common polymer resins which are amorphous and crystalline thermoplastics were used. Cylinder component cups with variation of wall thicknesses were designe
APA, Harvard, Vancouver, ISO, and other styles
3

Adjie, Arvian Restu, Masruki Kabib, and Rianto Wibowo. "DESAIN MESIN PENGAYAK TEMBAKAU DENGAN SISTEM VIBRATING SCREEN KAPASITAS 150 KG/JAM." JURNAL CRANKSHAFT 4, no. 2 (2021): 91–98. http://dx.doi.org/10.24176/crankshaft.v4i2.6800.

Full text
Abstract:
Dalam dunia usaha rokok tembakau diperlukan mesin penunjang untuk melakukan proses produksi tembakau yang akan di jadikan rokok Maka dari itu proses pengolahan tembakau sangat bergantung kepada mesin yang efisien agar dalam prosesnya dapat menghasilkan jenis dan ukuran tembakau yang sesuai standar dalam pembuatan rokok. Tujuan Penelitian adalah dapat mengayak dan memilah jenis tembakau sesuai ukuran yang akan digunakan dengan cara tembakau diayak menggunakan mesin yang di rancang dengan pengayak (Screen) digetarkan dengan (poros) yang tidak imbang sehingga menghasilkan getaran dan diredamdenga
APA, Harvard, Vancouver, ISO, and other styles
4

Harman, Harman, Jasman Jasman, and Israkwaty Israkwaty. "Perancangan Perahu Pemungut Sampah Plastik yang Mengapung di Pesisir Danau Matano." METANA 18, no. 1 (2022): 7–13. http://dx.doi.org/10.14710/metana.v18i1.42267.

Full text
Abstract:
Sampah plastik yang menumpuk di pesisir danau Matano merupakan akumulasi dari perilaku masyarakat selama bertahun-tahun membuang sampah di sembarang tempat yang pada akhirnya terbawa air ke Danau Matano. Diperlukan upaya bersama antara masyarakat dan pemerintah daerah guna menanggulangi penumpukan sampah tersebut. Meskipun telah dilakukan upaya pembersihan, namun penumpukan sampah masih terlihat di beberapa titik. Salah satu kendala karena sulitnya menjangkau area yang berada di air yang bercampur lumpur, serta keberadaannya di bawah rumah-rumah warga setempat. Tujuan penelitian ini adalah mer
APA, Harvard, Vancouver, ISO, and other styles
5

Dudko, Olexii. "The computer modeling study of diaphyseal bone fracture after internal fixation by titanium and stainless steel plates with angular stability screws." Natural & Mathematical Sciences in Medicine and Medical Education 2, no. 1 (2025): 16–26. https://doi.org/10.24061/3083-5887.j.nmsmme.2025.2.ii.1.

Full text
Abstract:
The rate of limb fractures is growing from year to year, so an improved approach is needed to make the treatment quicker, less expensive and more convenient for a patient. The operative treatment with plates can provide these advantages, but still it requires continuous research to improve techniques, devices and treatment results. The biomechanical interaction between a plate, screws and bone fragments is one of the critical factors that affect the stability of a fracture. The variety of fracture types, plate types and materials that are used for their manufacturing makes it complicated to pr
APA, Harvard, Vancouver, ISO, and other styles
6

Asroni, Asroni, and Dwi Irawan. "STRESS ANALYSIS PISTON SEPEDA MOTOR MENGGUNAKAN SOFTWARE AUTODESK INVENTOR 2015." Turbo : Jurnal Program Studi Teknik Mesin 6, no. 1 (2017). http://dx.doi.org/10.24127/trb.v6i1.465.

Full text
Abstract:
Modifikasi adalah cara merubah bentuk suatu benda atau barang dari bentuk awaldengan bentuk selanjutnya yang berbeda agar berbeda tanpa menghilangkan fungsi asli daribenda atau barang tersebut. Objek yang sering digunakan biasanya sepeda motor, sebagaicontoh modifikasi ruang bakar. Melihat kondisi di lapangan seringkali pada saat modifikasitidak menghiraukan atau tidak mengetahui bagaimana kerusakan akibat dari hasil modifikasiruang bakar tersebut. Akibatnya kerusakan pada ruang bakar sering terjadi seperti rusaknyapiston akibat thermal ataupun tekanan yang berlebihan. Tujuan penelitian ini ad
APA, Harvard, Vancouver, ISO, and other styles
7

Sudarmaji, Heri, and Pramana Sidik. "PERANCANGAN STRUKTUR PANEL SURYA DENGAN SISTEM PERGERAKAN SEMI OTOMATIS UNTUK PRODUK TOWER LAMP LS4-2000." Technologic 15, no. 2 (2024). https://doi.org/10.52453/t.v15i2.442.

Full text
Abstract:
Kualitas udara yang buruk menjadi salah satu faktor yang dapat membahayakan kesehatan manusia. Buruknya kualitas udara disebabkan tingginya persentase di udara hasil dari pemakaian bahan bakar minyak. Melalui peraturan pemerintah yaitu PP 79 tahun 2014 mengenai kebijakan pemakaian energi meminta semua perusahaan melakukan percepatan dalam menurunkan kadar menggunakan prinsip renewable energy. PT United Tractors Pandu Engineering merupakan perusahaan yang cepat merespon prinsip tersebut dengan cara pengaplikasiannya pada produk mereka salah satunya yaitu Tower Lamp. Tower lamp LS4-2000 saat ini
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Autodesk Inventor 2008"

1

Nepokoj, Lukáš. "Nové možnosti modelování v programu Autodesk Inventor Professional 2008." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217594.

Full text
Abstract:
This work describes the latest developments of program Autodesk Inventor Professional 2008, particularly aimed at Inventor Studio. There is the manual created for this program describing individual tools and their utilization in Inventor Studio. Further this paper shows the animation possibilities on simple models from power electrical engineering. Finally a measurement has been taken and a data evaluation of EC motor has been made with an object animation which represents the assembly process of this motor.
APA, Harvard, Vancouver, ISO, and other styles
2

Prokeš, Marek. "Modely elektrických přístrojů v moderních CAD systémech." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217604.

Full text
Abstract:
In this master thesis the new possibilities of software Autodesk Inventor Professional 2008 are described. Autodesk Inventor is a system for 3D machine engineering containing tools for 3D modeling, information management, cooperation and technical support. Autodesk Inventor Professional 2008 has a lot of new possibilities and improvements compared to the previous version. This Master thesis contains also description of the circuit breaker BD250N and its utilization in the distribution of low voltage. In enclosed CD the model animation of circuit breaker with description of modeling process can
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Autodesk Inventor 2008"

1

LoFaso, James P. Parametric modeling using Inventor: Autodesk inventor 2008. The Goodheart-Willcox Company, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Travis, Jones, and Kalameja Alan J, eds. Autodesk Inventor 2008 essentials plus. Autodesk Press, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

ger, Wolfgang Ha. 3D-CAD mit Inventor 2008: Tutorial mit durchga ngigem Projektbeispiel. Vieweg + Teubner, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

1974-, Waguespack Curtis, ed. Mastering Autodesk Inventor 2009 and Autodesk Inventor LT 2009. Wiley Technology Pub., 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

LoFaso, James P. Inventor for parametric modeling: Autodesk Inventor 2009. 3rd ed. Goodheart-Willcox Co., Inc., 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Banach, Daniel T. Autodesk Inventor 2009 essentials plus. Autodesk Press, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Travis, Jones, and Kalameja Alan J, eds. Autodesk Inventor 2009 essentials plus. Autodesk Press, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Thomas, Short. Learning Autodesk Inventor 2009: A process-based approach. 5th ed. Goodheart-Wilcox Co., Inc., 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Autodesk Inventor 2008 for Designers. CADCIM Technologies, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kalameja, Alan, Travis Jones, and Daniel T. Banach. Autodesk Inventor 2008 Essentials Plus. Autodesk Press, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Autodesk Inventor 2008"

1

Kishore, T. "Getting Started with Autodesk Inventor 2018." In Learn Autodesk Inventor 2018 Basics. Apress, 2017. http://dx.doi.org/10.1007/978-1-4842-3225-5_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kishore, T. "Part Modeling Basics." In Learn Autodesk Inventor 2018 Basics. Apress, 2017. http://dx.doi.org/10.1007/978-1-4842-3225-5_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kishore, T. "Assembly Basics." In Learn Autodesk Inventor 2018 Basics. Apress, 2017. http://dx.doi.org/10.1007/978-1-4842-3225-5_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kishore, T. "Creating Drawings." In Learn Autodesk Inventor 2018 Basics. Apress, 2017. http://dx.doi.org/10.1007/978-1-4842-3225-5_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kishore, T. "Additional Modeling Tools." In Learn Autodesk Inventor 2018 Basics. Apress, 2017. http://dx.doi.org/10.1007/978-1-4842-3225-5_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kishore, T. "Sheet Metal Modeling." In Learn Autodesk Inventor 2018 Basics. Apress, 2017. http://dx.doi.org/10.1007/978-1-4842-3225-5_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kishore, T. "Top-Down Assembly and Joints." In Learn Autodesk Inventor 2018 Basics. Apress, 2017. http://dx.doi.org/10.1007/978-1-4842-3225-5_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kishore, T. "Dimensions and Annotations." In Learn Autodesk Inventor 2018 Basics. Apress, 2017. http://dx.doi.org/10.1007/978-1-4842-3225-5_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kishore, T. "Model-Based Dimensioning." In Learn Autodesk Inventor 2018 Basics. Apress, 2017. http://dx.doi.org/10.1007/978-1-4842-3225-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Holland, Alan, Barry O’Callaghan, and Barry O’Sullivan. "A Constraint-Aided Conceptual Design Environment for Autodesk Inventor." In Principles and Practice of Constraint Programming – CP 2003. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-540-45193-8_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Autodesk Inventor 2008"

1

Gailani, Gaffar, Sidi Berri, and Malek Brahimi. "Integration of 3D Modeling, FEA, Rapid Prototyping in Engineering Technology 2-Year Programs." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-67554.

Full text
Abstract:
Graduates from the Associate in Applied Science (AAS) in Mechanical Engineering Technology (MECH) and Industrial Design (IND) Technology at New York City College of Technology are learning new skills in 3D modeling, Finite Elements Analysis (FEA) and Rapid Prototyping. Two year programs in engineering technology are often short of helping students to grasp all aspects of the technology. This is mainly due to the limited number of credits allowed in 2-year programs (about 60 credits). Most graduates from both MECH and IND find employment in the local industry. Growing demand from local employer
APA, Harvard, Vancouver, ISO, and other styles
2

Dues, Joseph Francis. "Stress Analysis for Novices Using Autodesk Inventor." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-14569.

Full text
Abstract:
Finite element analysis (FEA) is a numerical method for calculating stress and strain (and other quantities) in structures that cannot be easily analyzed any other way. FEA analysts use complex software to create a mathematic representation of the physical structure being studied, apply loads to the structure and then solve for the resulting displacements and stresses. In years past, FEA was performed by highly trained analysts with master's level engineering degrees or higher. Today, the combination of competitive market pressures, powerful computer hardware and well designed software has res
APA, Harvard, Vancouver, ISO, and other styles
3

Vlasenko, Dmitry, and Roland Kasper. "Integration Method of CAD Systems." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-35065.

Full text
Abstract:
This paper presents the modification of a non-iterative algorithm for the component-oriented simulation of the dynamics of multibodies. Now the method can be implemented for the component-oriented simulation of the dynamics of CAD systems with redundant constraints. Also the new version of the method is well-suitable for the implementation of sparse solvers. The algorithm was implemented in the Virtual System Designer (VSD) software, integrated with a CAD tool Autodesk Inventor. The simulation results of two CAD models: a car and a steam machine shows the method’s stability and accuracy.
APA, Harvard, Vancouver, ISO, and other styles
4

Madden, Christopher P., and Matthew R. Stein. "A Robotic Device for Three-Dimensional Manipulation Over the Internet." In ASME 2004 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/detc2004-57215.

Full text
Abstract:
The PumaPaint site has been allowing users to create paintings remotely over the Internet since 1998. Although this site allows for some artistic creativity, the task is inherently two-dimensional and lacks any real manipulation capability by the remote user. On a similar theme but with much higher complexity, we are creating a robotic device that will allow true, three-dimensional manipulation by the remote user with an added capacity for force control and kinesthetic feedback. The robotic device will be a roughly anthropomorphic pair of limited degree-of-freedom mechanical hands arranged in
APA, Harvard, Vancouver, ISO, and other styles
5

Kudriavtsev, Vladimir, Brian Feeney, Ta-Liang Hsu, Alexei Borovkov, Kalman Rooz, and Dimitriy Klimshin. "CFD, Thermal and Stress Analysis for daVinci X-Prize Manned Space Mission: Part 2 (Keynote)." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-3141.

Full text
Abstract:
In the present article we review engineering and research efforts conducted by a group of volunteers with the help of advanced engineering commercial software (CFD-ACE+, ANSYS, CFD-FASTRAN, Matlab/Simulink, Autodesk Inventor, Maple) in support of the da Vinci Project, the first Canadian competitor in the International X Prize Competition. Full account of these activities was presented at the da Vinci Space Project Technical Conference Program [1]. Announced in 1996 to promote the development and flight of spacecraft for low-cost commercial transport of humans into space, the international X-Pr
APA, Harvard, Vancouver, ISO, and other styles
6

Kudriavtsev, Vladimir, Brian Feeney, Max Buneta, et al. "CFD, Thermal and Stress Analysis for daVinci X-Prize Manned Space Mission: Computational Design Analysis - Part 1 (Keynote Lecture)." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-3113.

Full text
Abstract:
In the present article we review engineering and research efforts conducted by a group of volunteers with the help of advanced engineering commercial software (CFD-ACE+, ANSYS, CFD-FASTRAN, Matlab/Simulink, Autodesk Inventor, Maple) in support of the da Vinci Project, the first Canadian competitor in the International X Prize Competition. The da Vinci Project has an objective of launching the first private sub-orbital manned space flight by the end of 2004. Under X Prize rules the vehicle must be reusable, built to hold 3 people and complete 2 flights within a 2 week period. The basic launch c
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Andy S. J. "Teaching Computer Aided Product Design With Aesthetic Considerations." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-85531.

Full text
Abstract:
This paper presents a study on how to utilize the computer based 3-dimensional parametric solid modeling software to integrate aesthetics into the lectures of product design related courses of a mechanical engineering curriculum to improve teaching and learning. The study indicates that when aesthetics were properly introduced into the classrooms of product design related courses; it created an environment that stimulated students’ imagination and creativity therefore enhancing their learning experience. When teaching product design courses, instruction tends to be focused on the underlying en
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Autodesk Inventor 2008' for particular source types:
Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography