Log in

Relevant bibliographies by topics / Autodesk Inventor 2017 / Journal articles

To see the other types of publications on this topic, follow the link: Autodesk Inventor 2017.

Journal articles on the topic 'Autodesk Inventor 2017'

Author: Grafiati

Published: 4 June 2021

Last updated: 18 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Autodesk Inventor 2017.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Wibawa, Lasinta Ari Nendra. "DESAIN DAN ANALISIS TEGANGAN STRUKTUR CRANE KAPASITAS 10 TON MENGGUNAKAN METODE ELEMEN HINGGA." Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan 4, no. 2 (2020): 201. http://dx.doi.org/10.24912/jmstkik.v4i2.7006.

Full text

Abstract:

Crane is one of the heavy equipment that is widely used in the industry. The crane functions as a tool for lifting heavy loads and moving them from one place to another vertically and horizontally. In the LAPAN Garut office, it is used for the rocket assembly process. The study investigates the design and analysis of von Mises stress of crane structure with a capacity of 10 tons using mild steel material. The investigation was carried out numerically using Autodesk Inventor Professional 2017. The simulation results showed the Crane structure had a von Mises stress, deformation, mass, and safet

APA, Harvard, Vancouver, ISO, and other styles

2

Wibawa, Lasinta Ari Nendra. "DESAIN DAN ANALISIS TEGANGAN CRANE HOOK MODEL CIRCULAR SECTION KAPASITAS 5 TON MENGGUNAKAN AUTODESK INVENTOR 2017." Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer 10, no. 1 (2019): 27–32. http://dx.doi.org/10.24176/simet.v10i1.2669.

Full text

Abstract:

Penelitian ini mengkaji tentang perancangan dan analisis tegangan Crane Hook model Circular Section dengan kapasitas 5 ton menggunakan material Stainless Steel dan Aluminium 6061. Analisis dilakukan secara numerik dengan menggunakan software Autodesk Inventor Professional 2017. Hasil penelitian menunjukkan bahwa material Aluminium memiliki massa dan faktor keamanan yang lebih baik daripada material Stainless Steel.

APA, Harvard, Vancouver, ISO, and other styles

3

Wibawa, Lasinta Ari Nendra. "Desain dan Simulasi Elemen Hingga Gantry Crane Kapasitas 9 Ton Menggunakan Autodesk Inventor 2017." Manutech : Jurnal Teknologi Manufaktur 11, no. 02 (2019): 41–48. https://doi.org/10.5281/zenodo.5910213.

Full text

Abstract:

Currently, the gantry crane in LAPAN Garut still uses steel material. The steel material is protected using a coating to minimize the impact of corrosion. However, this method is less efficient, considering the corrosion rate in LAPAN Garut is very high because it is located on the coast of Cilauteureun. It also creates problems in terms of maintenance because it has to be done regularly and periodically repainting. In addition, not all equipment is available maintenance funds every year. The objective of this paper is to design and analyze the stress of a gantry crane

APA, Harvard, Vancouver, ISO, and other styles

4

Jaya, Ahmad, Anas Muliadin, Indra Darmawan, Titi Andriani, Nova Aryanto, and Muhammad Hidayatullah. "Desain Steam Boiler Pembangkit Listrik Tenaga Biomassa Skala Kecil Menggunakan Software Autodesk Inventor 2017." Jurnal Fisika Flux: Jurnal Ilmiah Fisika FMIPA Universitas Lambung Mangkurat 18, no. 2 (2021): 93. http://dx.doi.org/10.20527/flux.v18i2.10273.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Wibawa, Lasinta Ari Nendra. "Desain dan Analisis Tegangan Alat Pengangkat Roket Kapasitas 10 Ton Menggunakan Metode Elemen Hingga." Jurnal Energi dan Teknologi Manufaktur (JETM) 2, no. 01 (2019): 23–26. http://dx.doi.org/10.33795/jetm.v2i01.31.

Full text

Abstract:

This study examines the design and stress analysis of a 10 ton capacity rocket lifting device using the finite element method. The material used is Aluminum alloy 7075. Finite element analysis is done numerically by using Autodesk Inventor Professional 2017. software The simulation results show that the structure of the rocket lift has Von Mises stress, deformation, mass, and safety factors of 46.34 MPa, 0.7947 mm, 186.75 kg, and 3.13.

APA, Harvard, Vancouver, ISO, and other styles

6

Siswantoro, Bagas, Kardiman -, and Ratna Dewi Anjani. "BLADE VOLTAGE ANALYSIS OF PLASTIC CHEARING MACHINE USING SKD 11 MATERIAL USING AUTODESK INVENTOR SOFTWARE 2017." T R A K SI 23, no. 2 (2024): 185. https://doi.org/10.26714/traksi.23.2.2023.185-214.

Full text

Abstract:

Plastic waste is a problem for all humans and animals because plastic is difficult to decompose by the soil, it takes a long time for plastic to decompose. Indonesia has a large population and every year it will continue to increase and the use of plastic in Indonesia will also continue to increase, especially plastic bottle waste. Plastic chopping knife is an important component for the results of shredding plastic waste, there are many types of chopping knives according to the desired chopping results. Knives must be declared strong and tough to chop plastic into powder or small granules. In

APA, Harvard, Vancouver, ISO, and other styles

7

Wibawa, Lasinta Ari Nendra. "Pengaruh Kecepatan Landing Vertikal Terhadap Ketahanan Beban Impak Rangka Landing Gear Menggunakan Metode Elemen Hingga." Angkasa: Jurnal Ilmiah Bidang Teknologi 11, no. 1 (2022): 35–42. https://doi.org/10.28989/angkasa.v11i1.434.

Full text

Abstract:

This study aimed to investigate the effect of vertical landing speed on impact load resistance of the landing gear frame using the finite element method. Stress analysis was done using Autodesk Inventor Professional 2017 software. The landing gear frame material used Aluminum alloy 5083. The UAV weighed 100 kg and had an impact time of 0.5 seconds. Vertical landing speeds were 7 m/s, 8 m/s, 9 m/s, and 10 m/s. Simulation results show that the landing gear frame is safe enough to withstand landing speeds of up to 9 m/s because it has a safety factor of 3.201.

APA, Harvard, Vancouver, ISO, and other styles

8

Ananda, Dhea Nuni, Rizal Hanifi, and Aa Santosa. "Perancangan dan Analisis Tegangan pada Desain Footrest Sepeda Motor Menggunakan Autodesk Inventor." Jurnal Teknik Mesin 14, no. 1 (2021): 1–5. http://dx.doi.org/10.30630/jtm.14.1.479.

Full text

Abstract:

Motorbikes are widely chosen by the public as a mode of transportation in modern times, one of which is the automatic scooter type motorcycle. Visually, the matic scooter type motorcycle components have a nice and attractive shape, but this shape does not necessarily guarantee its safety. Not a few of these components have failed (broken) as happened to the footrest. Footrest is a component of a motorcycle vehicle that functions as a footrest for motorcycle passengers. Every different type of motorbike, the footrest shape is also different. The purpose of this study is to design a footrest des

APA, Harvard, Vancouver, ISO, and other styles

9

Wibawa, Lasinta Ari Nendra, and Dwi Aries Himawanto. "ANALISIS KETAHANAN BEBAN DINAMIS MATERIAL TURBIN ANGIN TERHADAP KECEPATAN PUTAR ROTOR (RPM) MENGGUNAKAN METODE ELEMEN HINGGA." Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer 9, no. 2 (2018): 803–8. http://dx.doi.org/10.24176/simet.v9i2.2343.

Full text

Abstract:

Penelitian ini mengkaji tentang ketahanan beban dinamis material CFRP dan Aluminium 6061 untuk material turbin angin terhadap kecepatan putar rotor (rpm). Desain 3 (tiga) bilah turbin angin menggunakan airfoil NACA 2415 dengan panjang 500 mm. Analisis dilakukan secara numerik dengan menggunakan software Autodesk Inventor Professional 2017. Variasi kecepatan rotor yang digunakan yaitu 100 rpm, 200 rpm, 300 rpm, dan 400 rpm. Hasil penelitian menunjukkan material CFRP memiliki faktor keamanan yang lebih baik daripada material Aluminium 6061 saat pengujian dengan menggunakan kecepatan rotor 400 rp

APA, Harvard, Vancouver, ISO, and other styles

10

Satrio Utomo, Ilham, and Rangga Arya Fachreza. "DESAIN ALAT BONGKAR PASANG COWHANGER PADA LOKOMOTIF DENGAN PENGGERAK ULIR." Jurnal Penelitian Sekolah Tinggi Transportasi Darat 12, no. 2 (2022): 25–34. http://dx.doi.org/10.55511/jpsttd.v12i2.588.

Full text

Abstract:

Bongkar pasang cowhanger saat ini masih dilakukan dengan cara manual yaitu dengan cara mengganjal cowhanger dengan balok-balok di atas rel. Untuk pemindahan cowhanger masih dengan cara manual yakni diangkat menggunakan tangan yang tentu saja beresiko bagi pekerja. Penelitian ini bertujuan untuk melakukan desain serta perhitungan kekutan pada alat bantu bongkar pasang cowhanger. Software yang digunalan dalam penelitian ini dengan Autodesk Inventor 2017. Hasil simulasi menunjukkan alat ini bisa menerima beban maksimal sebesar 2000 N serta tegangan terbesarnya adalah 1,596 Mpa dan tegangan terkec

APA, Harvard, Vancouver, ISO, and other styles

11

Wibawa, Lasinta Ari Nendra. "Desain dan Analisis Kekuatan Rangka Tempat Sampah di Balai LAPAN Garut Menggunakan Metode Elemen Hingga." Turbulen: Jurnal Teknik Mesin 1, no. 2 (2018): 64–68. https://doi.org/10.5281/zenodo.5910326.

Full text

Abstract:

This study examined the design and analysis of the strength of the trash bin frame using the finite element method. The analysis was carried out using Autodesk Inventor Professional 2017. The frame material used was Aluminum 5052 with ISO 10799-2 (Square) standard with the size of 25 x 25 x 2 mm. The variable load of the trash bin was 55 kg, 60 kg, 65 kg, and 70 kg. The simulation results show that a load of a trash bin with the weight of 55 kg, 60 kg, 65 kg, and 70 kg had the safety factor of 2,49, 2,28, 2,11, and 1,96.

APA, Harvard, Vancouver, ISO, and other styles

12

Wibawa, Lasinta Ari Nendra. "Pengaruh Pemilihan Material Terhadap Kekuatan Rangka Main Landing Gear Untuk Pesawat UAV." Jurnal Teknologi dan Terapan Bisnis (JTTB) 2, no. 1 (2019): 48–52. https://doi.org/10.5281/zenodo.5910249.

Full text

Abstract:

This study examined the effect of material selection on the strength of the main landing gear frame for UAV aircraft using the finite element method. Linear static analysis was carried out using Autodesk Inventor Professional 2017 software. Main landing gear frame using Aluminum 5052-H38, Aluminium 5083 87 Cold-Formed, Aluminium 6061, and CFRP. UAV aircraft was weighing 85 kg with a landing speed of 10 m/s and impact time of 0,5 seconds. The simulation results show that the landing gear frames of the lightest in a row were CFRP, Al 5083 87 Cold-Formed, Al 5052-H38, and Al 6061. Materials that

APA, Harvard, Vancouver, ISO, and other styles

13

Hariyanto, Satriawan Dini, Rela Adi Himarosa, Andreas Brian Aditya, Sandy Hidayat, Eko Sulistyo Wibowo, and Disa Nandy Krisnansia. "Pengembangan Konsep Desain dan Fabrikasi Mesin Penyortir Buah Duku (Lansium Parasiticum)." JMPM (Jurnal Material dan Proses Manufaktur) 4, no. 2 (2020): 91–102. http://dx.doi.org/10.18196/jmpm.v4i2.11433.

Full text

Abstract:

Pengembangan konsep desain mesin penyortir buah duku (Lansium Parasiticum) dilakukan menggunakan metode Five Step Method. Diperoleh tiga konsep mesin yang kemudian dipilih satu dari tiga konsep terbaik menggunakan metode product champion dilanjutkan dengan pembuatan desain 3D dan Finite Element Analysis (FEA) menggunakan software autodesk inventor 2017. Analisis FEA menunjukkan nilai von Misses stress sebesar 18 MPa bernilai lebih kecil dibanding yield strength material penyusun rangka sebesar 207 MPa, displacement yang terjadi sebesar 0,99 mm dengan nilai safety factor 15. Fabrikasi dan pengu

APA, Harvard, Vancouver, ISO, and other styles

14

Wibawa, Lasinta Ari Nendra, and Tuswan Tuswan. "Simulasi numerik kekuatan rak roket portabel menggunakan metode elemen hingga." Jurnal Teknik Mesin Indonesia 16, no. 2 (2021): 54–59. https://doi.org/10.36289/jtmi.v16i2.242.

Full text

Abstract:

Makalah ini memaparkan tentang desain rak roket portabel dan analisis tegangan statik menggunakan simulasi numerik. Rangka rak roket portabel didesain untuk mampu membawa 5 unit roket. Pada penelitian ini, beban tiap roket divariasikan 150 kg, 175 kg, 200 kg, dan 225 kg. Material rangka rak roket portabel menggunakan Aluminium 6061-T6. Simulasi numerik dilakukan dengan bantuan perangkat lunak Autodesk Inventor Professional 2017. Hasil analisis tegangan statik menunjukkan tegangan von Mises maksimum rak roket portabel untuk variasi beban 150 kg, 175 kg, 200 kg, dan 225 kg berturut-turut adalah

APA, Harvard, Vancouver, ISO, and other styles

15

Rahman. R, Laode, Yuspian Gunawan, and Prinob Aksar. "Desain dan Analisa Tegangan Tarik Maksimum Dan Tegangan Tekan Maksimum Kait (Hook) Pada Overhead Crane." Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin 6, no. 3 (2021): 120. http://dx.doi.org/10.55679/enthalpy.v6i3.20981.

Full text

Abstract:

In the industrial world there have been many innovations and creations aimed at improving the quality and quantity of production. In industrial and construction activities, there are usually material or material loads that cannot be lifted using human power. For industry, there is a lifting device called a crane. Cranes have a main component called a hook which is used to help lift the load by being hooked. Hooks that are designed incorrectly will be dangerous when used, so it is necessary to check the stress through theoretical analysis calculations or by simulation using Autodesk Inventor to

APA, Harvard, Vancouver, ISO, and other styles

16

Wibawa, Lasinta Ari Nendra. "DESAIN DAN ANALISIS KEKUATAN RANGKA LEMARI PERKAKAS DI BALAI LAPAN GARUT MENGGUNAKAN METODE ELEMEN HINGGA." Machine : Jurnal Teknik Mesin 5, no. 2 (2019): 45–50. http://dx.doi.org/10.33019/jm.v5i2.787.

Full text

Abstract:

Penelitian ini mengkaji tentang perancangan dan analisis kekuatan rangka lemari perkakas menggunakan metode elemen hingga. Lemari perkakas didesain lima tingkat dengan ukuran 800 mm (panjang), 400 mm (lebar), dan 1750 mm (tinggi). Analisis dilakukan menggunakan software Autodesk Inventor Professional 2017. Material rangka yang digunakan adalah Aluminum paduan 3003-H12 dengan standar DIN EN 10056-1 (Equal angles) dengan ukuran 25 x 25 x 3 mm. Variabel beban tiap tingkat lemari perkakas yaitu 45 kg, 50 kg, 55 kg, dan 60 kg. Hasil simulasi menunjukkan untuk beban lemari perkakas tiap tingkat deng

APA, Harvard, Vancouver, ISO, and other styles

17

Wibawa, Lasinta Ari Nendra. "Pemodelan umur fatik alat pengangkat roket kapasitas 20 Ton menggunakan Ansys Workbench." Turbulen: Jurnal Teknik Mesin 2, no. 2 (2019): 44–49. https://doi.org/10.36767/turbulen.v2i2.540.

Full text

Abstract:

A rocket lifting device is a tool designed to facilitate the rocket assembly process. The device is mounted on a crane and is equipped with two webbing slings placed at the bottom. The study examines the fatigue life prediction of rocket lifting devices using the finite element method. The design of rocket lifting device using Autodesk Inventor Professional 2017, while finite element analysis using Ansys Workbench. It is subjected to a 20-ton load with a fully-reserved type of loading. The fatigue life prediction using the Gerber mean stress theory. The material for the rocket lifting device i

APA, Harvard, Vancouver, ISO, and other styles

18

Syafwan, Elvathna, Rizki Ramdani, Agus Saleh, and Muhammad Quraish Jumaati. "RANCANG BANGUN RANGKA MESIN PENGERING GABAH PADI (BED DRYER) KAPASITAS 3 KG." Jurnal TEDC 17, no. 2 (2023): 152. https://doi.org/10.70428/tedc.v17i2.710.

Full text

Abstract:

In the process of harvesting rice, farmers take rice grains or grain to dry. For small-scale farmers, grain drying is done manually with the help of solar heat. It is not effective because it depends on weather conditions. Rice grain drying machines on the market are generally for large capacities. This machine is not suitable for small scale farmers. Based on this background, a rice grain drying machine was designed for small production scale farmers. The limitations of this study only discuss the construction of the engine frame. The stages of the research carried out are; determine the init

APA, Harvard, Vancouver, ISO, and other styles

19

Ulumuddin, Mohammad Ihya’. "ANALISIS TEGANGAN INSERT CAVITY MOLDING RAK SEPATU TERHADAP TEKANAN 160 MPA PADA MESIN INJECTION PLASTIK MENGGUNAKAN SOFTWARE AUTODESK INVENTOR PROFESSIONAL 2017." Mechonversio: Mechanical Engineering Journal 2, no. 2 (2020): 1. http://dx.doi.org/10.51804/mmej.v2i2.612.

Full text

Abstract:

Plastik merupakan salah satu bahan baku untuk membuat suatu product plastik yang berguna untuk memenuhi kebutuhan manusia, Selama pengamatan di PT X terutama dalam proses pembuatan desain molding, di tempat tersebut tidak melakukan analisis desain menggunakan software, oleh sebab itu penulis membuat analisis molding menggunakan software, penelitian ini bertujuan menganalisis kekuatan plate insert cavity pada saat mendapatkan tekanan 160 MPa dari mesin injection untuk mengetahui tegangannya perlu dilakukan analisis memakai software autodesk inventor profesioanl 2017 Pada analisis ini dilakukan

APA, Harvard, Vancouver, ISO, and other styles

20

Król, Roman. "Kinematics and dynamics of the two stage cycloidal gearbox." AUTOBUSY – Technika, Eksploatacja, Systemy Transportowe 19, no. 6 (2018): 523–27. http://dx.doi.org/10.24136/atest.2018.125.

Full text

Abstract:

This article presents results of the numerical analysis of cycloidal gearbox, which were obtained in MSC Adams engineering software. Multibody geometry for dynamical analysis was designed in Autodesk Inventor Professional 2017 and imported in MSC Adams. The results of analysis are forces acting on the internal and external sleeves, position, velocity and acceleration of the selected points on the cycloidal gearbox’s moving components. Indirect result is time course of the torque at output shaft which was calculated on the basis of forces acting on the internal sleeves, which are parts of the e

APA, Harvard, Vancouver, ISO, and other styles

21

Darsan, Herri, Maidi Saputra, Zulfadly Zulfadly, and Muzakir Muzakir. "DESIGN DAN ANALISIS NUMERIK MESIN PENYANGRAI KELAPA PARUT UNTUK PEMBUATAN BUMBU MASAKAN KHAS ACEH (U NEULEU)." Jurnal Mekanova: Mekanikal, Inovasi dan Teknologi 7, no. 2 (2022): 184. http://dx.doi.org/10.35308/jmkn.v7i2.4369.

Full text

Abstract:

Mesin Penyangrai kelapa kukur (U Neuleu) adalah mesin yang digunakan untuk melakukan proses sangrai dengan cara penggorengan tanpa menggunakan minyak dan tangan manusia. Desain alat akan menjelaskan bagaimana proses menggambar bagian-bagian dari alat yang akan di rancangan oleh karna itu perlu persiapan yang matang untung mendesain suatu alat agar waktu proses pembuatan nya tidak akan terjadi kesalahan dimana nanti nya waktu pembuatan alat harus sesuai dengan gambar yang sudah di buat sebelumnya. Mesin sangrai ini bekerja secara Otomatis yang di kontrol mengunakan Adruino UNO untuk Rangkaian e

APA, Harvard, Vancouver, ISO, and other styles

22

Wibawa, Lasinta Ari Nendra. "Simulasi umur fatik rangka main landing gear menggunakan metode elemen hingga." Dinamika Teknik Mesin 10, no. 2 (2020): 120–26. https://doi.org/10.5281/zenodo.5910170.

Full text

Abstract:

<em>The landing gear is one crucial component in an Unmanned Aerial Vehicle (UAV) aircraft construction. Landing gear serves as the main supporting component of aircraft load when landing and take off. This research aims to investigate the fatigue design life of the main landing gear on the UAV aircraft. The main landing gear frame design used Autodesk Inventor Professional 2017, while finite element analysis used Ansys Workbench software. It is subjected to a load of 1500 N with a loading fully-reserved. The prediction for fatigue life using Gerber mean stress theory. The material of the main

APA, Harvard, Vancouver, ISO, and other styles

23

Wibawa, Lasinta Ari Nendra, and Kuncoro Diharjo. "Desain, Pemilihan Material, dan Faktor Keamanan Stasiun Pengisian Gawai Menggunakan Metode Elemen Hingga." Jurnal Teknologi 11, no. 2 (2019): 97–102. https://doi.org/10.5281/zenodo.5910328.

Full text

Abstract:

The use of gadget in the work environment is now a common need. Gadget is one technology product that is very important in supporting work productivity and facilitating communication between employees. This condition causes the gadget charging station to become a very important medium for maintaining connectivity between employees. This study aimed to design gadget charging station using Polycarbonate and HDPE materials. The selection of the two materials was based on the consideration of the characteristics of electrical insulators which were not possessed by metal materials. It was very impo

APA, Harvard, Vancouver, ISO, and other styles

24

Wibawa, Lasinta Ari Nendra, and Kuncoro Diharjo. "Pengaruh Beban terhadap Prediksi Umur Fatik Rangka Meja Kerja Balai LAPAN Garut Menggunakan Ansys Workbench." Jurnal Teknik Mesin ITI 4, no. 2 (2020): 57. http://dx.doi.org/10.31543/jtm.v4i2.414.

Full text

Abstract:

The study examines the effect of the load on fatigue life prediction of a workbench frame using the finite element method. The design of the workbench frame uses Autodesk Inventor Professional 2017, while finite element analysis uses Ansys Workbench. The workbench frame is subjected to loads 150, 175, 200, and 225 kg with a fully-reserved type of loading. Fatigue life prediction using Gerber's mean stress theory. The material of the workbench frame using Aluminum alloy 6061. The simulation results show that the workbench frame has a minimum fatigue life for loads of 150, 175, 200, and 225 kg,

APA, Harvard, Vancouver, ISO, and other styles

25

Lima, Matheus Valente de, João Evangelista Neto, and Edry Antonio Garcia Cisneros. "Construction of a Small-Scale Tugboat." International Journal of Engineering and Modern Technology 8, no. 4 (2023): 39–55. http://dx.doi.org/10.56201/ijemt.v8.no4.2022.pg39.55.

Full text

Abstract:

Support vessels for other ships emerged to provide specialized assistance in port logistics. Among these support vessels are tugboats. In this logistics, a tugboat that has an ineffective propulsive system will cause poor support, bringing losses to the sector's production chain. The problem addressed in the work aims precisely to present the construction process of tugboats as complex and dynamic, but at the same time allows to achieve very favorable results in terms of teamwork and the use of computer simulation in the process of projecting parts and components. This work presents the proces

APA, Harvard, Vancouver, ISO, and other styles

26

AHFANDI, ACHMAD, Basuki, Fajar Satriya Hadi, and Mochamad Arif Irfa’i. "REPLEACEMENT MESIN FRAIS WMD-25VL PENGGERAK KONVENSIONAL MENJADI PENGGERAK OTOMATIS MENGGUNAKAN MOTOR STEPPER NEMA 23 3A DAN LIMIT SWITCH ME-8108." Jurnal MOTION ( Manufaktur, Otomasi, Otomotif, dan Energi Terbarukan) 2, no. 02 (2024): 9–17. http://dx.doi.org/10.33752/motion.v2i02.6133.

Full text

Abstract:

Dudukan motor stepper memiliki 3 axis yaitu axis X, axis Y dan axis Z. Desain yang digunakan untuk membuat dudukan menggunakan Autodesk Inventor 2017. Setiap dudukan memilki ukuran yang berbeda. Axis X panjang 179mm, lebar 77,5mm dan tebal 10mm. Axis Y panjang 118mm, lebar 58 mm dan tebal 10mm. Axis Z panjang 150mm, lebar 100mm dan tebal 10mm. Kinerja limit switch ME-8108 sama seperti pada saklar lampu ON/OFF yaitu hanya akan terhubung pada saat katupnya ditekan dan akan terputus saat katup tidak ditekan. Pada saat axis bergerak dan saat sumbu axis melewati garis yang ditentukan, maka saklar a

APA, Harvard, Vancouver, ISO, and other styles

27

WIBAWA, LASINTA ARI NENDRA. "PENGARUH BEBAN TERHADAP PREDIKSI UMUR FATIK DUDUKAN (BRACKET) AC OUTDOOR MENGGUNAKAN METODE ELEMEN HINGGA." JURNAL CRANKSHAFT 3, no. 1 (2020): 12–18. http://dx.doi.org/10.24176/crankshaft.v3i1.4320.

Full text

Abstract:

The study examines the effect of the load on fatigue life prediction of an outdoor AC bracket using the finite element method. Outdoor AC bracket design uses Autodesk Inventor Professional 2017, while finite element analysis uses Ansys Workbench. The outdoor AC bracket is subjected to a load of 20, 25, 30, and 35 kg with a fully-reserved type of loading. Gerber's mean stress theory is used to predict fatigue life. The outdoor AC bracket material uses Aluminum alloy 5052. The simulation results show that the outdoor AC bracket has a minimum fatigue life for loads of 20, 25, 30, and 35 kg, respe

APA, Harvard, Vancouver, ISO, and other styles

28

Wibawa, Lasinta Ari Nendra. "Pengaruh Beban Terhadap Prediksi Umur Fatik Dudukan (Bracket) AC Outdoor Menggunakan Metode Elemen Hingga." Jurnal Crankshaft 3, no. 1 (2020): 12–18. https://doi.org/10.5281/zenodo.5910265.

Full text

Abstract:

The study examines the effect of the load on fatigue life prediction of an outdoor AC bracket using the finite element method. Outdoor AC bracket design uses Autodesk Inventor Professional 2017, while finite element analysis uses Ansys Workbench. The outdoor AC bracket is subjected to a load of 20, 25, 30, and 35 kg with a fully-reserved type of loading. Gerber's mean stress theory is used to predict fatigue life. The outdoor AC bracket material uses Aluminum alloy 5052. The simulation results show that the outdoor AC bracket has a minimum fatigue life for loads of 20, 25, 30, and 35 kg, r

APA, Harvard, Vancouver, ISO, and other styles

29

Endriatno, Nanang, and Kadir. "DESAIN MESIN PEMARUT KELAPA DAN UBI KAYU DENGAN KOMBINASI ROL PARUT." DINAMIKA: Jurnal Ilmiah Teknik Mesin 10, no. 2 (2019): 15–20. https://doi.org/10.5281/zenodo.3034686.

Full text

Abstract:

<em>This study aims to determine the safe shaft and to design a model of cassava and coconut grated machines. In this study, the grated machine was designed using Autodesk Inventor 2017. The material used for the shaft is carbon steel (S45C) with a tensile strength of 58 kg/mm<sup>2</sup>. The shaft calculation results show that the plan power is 4.0425 KW, torsional moment or torque at shaft speed 2670 rpm is 5124,955 kg.mm, and permissible shear stress is 4.83 (kg/mm<sup>2</sup>), and shaft diameter is 21 mm, while the shear stress is obtained at 2.823 kg/mm<sup>2</sup>. From the above resul

APA, Harvard, Vancouver, ISO, and other styles

30

Leman, Sunarjo, Fanniwati Itang, and Jemy Wijaya. "KAJIAN KEKUATAN BALOK KERATON DENGAN ANALISIS METODE ELEMEN HINGGA." Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan 3, no. 1 (2019): 113. http://dx.doi.org/10.24912/jmstkik.v3i1.3357.

Full text

Abstract:

Penelitian numerik sebelumnya mengenai segmen Bata Keraton telah diperoleh kekuatan pikul segmen Bata Keraton adalah lebih kurang 1 ton/m2. Pada penelitian lain uji laboratorium dengan merangkai segmen Bata Keraton menjadi Balok Keraton diperoleh kekuatan pikul untuk bentang 2.0 meter berkisar antara 105-200 Kg dan bentang 3.0 meter berkisar antara 60-170 Kg. Penelitian menggunakan cara uji laboratorium membutuhkan material uji, struktur yang diuji dengan ukuran sebenarnya, sumber daya manusia untuk merakit dari bentuk segmen Bata Keraton tersebut menjadi bentuk Balok Keraton dengan besi tulan

APA, Harvard, Vancouver, ISO, and other styles

31

Sylvia, Novi, Yunardi Yunardi, Husni Husni, and Abrar Muslim. "Simulation of CO2 Gas Adsorption Process Flow at Cyclone Gas Outlet in Palm Oil Mills Using Computation Fluid Dynamic Simulation." International Journal of Engineering, Science and Information Technology 1, no. 3 (2021): 104–9. http://dx.doi.org/10.52088/ijesty.v1i3.112.

Full text

Abstract:

Cyclone separator is equipment used to control emissions from gas flow in industrial processes. The principle of removing particulates from the gas flow in this tool is to use the centrifugal force. The centrifugal force generated from the rotating flow will make dust particles wasted into the cyclone wall where the dust will then fall into the hopper. Adsorption is a series of processes for the accumulation of a substance (adsorbate) on the surface of another substance (adsorbent). Adsorption can occur because of the energy on the surface and the attraction force on the surface. This study ai

APA, Harvard, Vancouver, ISO, and other styles

32

Sapiee, M. R., M. H. M. Marhaban, M. F. Miskon, and A. J. Ishak. "Walking simulation model of lower limb exoskeleton robot design." Journal of Mechanical Engineering and Sciences 14, no. 3 (2020): 7071–81. http://dx.doi.org/10.15282/jmes.14.3.2020.09.0554.

Full text

Abstract:

Since 1960s, the development of exoskeleton robots have been advancing in the applications such as load carrying, walking endurance, physical assistance and rehabilitation therapy. Rehabilitation therapy in itself is related to walking ability restoration; especially for the elder people. A survey by The United Nations in 2017 revealed increase trend in the number of ageing population. Due to ageing, it may cause weakened limbs, lower limb injuries or disabilities resulting in walking impairment. Elder people suffering from walking impairment will need to undergo walking therapy to recover wal

APA, Harvard, Vancouver, ISO, and other styles

33

Husaini, Rizqi Handayani Liza, Ali Nurdin, and Sadrawi Muammar. "Failure Analysis of a Fractured Leaf Spring as the Suspension System Applied on the Dump Truck." Key Engineering Materials 892 (July 13, 2021): 89–98. http://dx.doi.org/10.4028/www.scientific.net/kem.892.89.

Full text

Abstract:

A spring is a component which is designed to have relatively low stiffness compared to normal rigid rods, thereby making it possible to accept certain forces that are charged. A leaf spring is an important suspension component for heavy vehicles, as a failure of the leaf spring can cause severe if not fatal accidents. This study aims to investigate the factors that cause leaf spring failure in the form of a 125 PS dump truck vehicle suspension system. The method employed incorporated experimental and finite element analyses. The experimental work included visual observations, observation using

APA, Harvard, Vancouver, ISO, and other styles

34

Zhanaspaev, Amangazy, Timur Zhanaspayev, Boris Gorbunov, and Anatoly Bondarenko. "Biomechanics of the Replicating Effect Evaluated by the Finite Element Method and X-ray Results of Two-Vector Distraction by an External Fixation Device in the Surgical Treatment of a Sanders IV type os Calcis Fracture." Traumatology and Orthopаedics of Kazakhstan 3, no. 74 (2024): 17–25. https://doi.org/10.52889/1684-9280-2024-3-74-17-25.

Full text

Abstract:

The treatment of Sanders IV type calcaneal compression fractures challenges and the optimal technique of reposition remains controversial. The aim of the study was to determine the advisability and radiological effectiveness of intraoperative two-vector distraction by an external fixation device to restore the external configuration of the os calcis during surgical treatment of a Sanders IV type compression fracture.Methods. A mathematical model of the proposed device for external fixation and compression fracture of os calcis of the Sanders IV type was developed by the finite element method.

APA, Harvard, Vancouver, ISO, and other styles

35

Dicky, Seprianto. "PERANCANGAN ALAT BLENDING/MIXING MENGGUNAKAN PERANGKAT LUNAK CAD AUTODESK INVENTOR PROFESSIONAL 2010." AUSTENIT 3, no. 1 (2011): 52–60. https://doi.org/10.5281/zenodo.4544227.

Full text

Abstract:

Desain secara harfiah sering diartikan sebagai merancang, merencana, atau merekayasa suatu produk yang ekonomis dan efisien. Desain dimulai keberadaannya ketika ada kebutuhan akan suatu produk. Pada tahap ini, semua konsep yang dibutuhkan dari fungsi yang akan dicapai, atribut keinginan konsumen, dan semua atribut yang berkaitan dengan produk dipetakan dan menjadi pertimbangan desain produk. Inovasi diperlukan ketika produk akan dibuat, merupakan sesuatu yang baru dari segi desain, sistem, dan fungsinya. Oleh karena ada tujuan fungsi dan sistem yang baru itulah, kemudian dilakukan riset atau p

APA, Harvard, Vancouver, ISO, and other styles

36

Irfan, Saiful, and Rusiyanto Rusiyanto. "Perancangan CNC Plasma Cutting Menggunakan Software Autodesk Inventor 2015." Jurnal Rekayasa Mesin 12, no. 1 (2021): 1. http://dx.doi.org/10.21776/ub.jrm.2021.012.01.1.

Full text

Abstract:

<p class="Abstract">This study aims to determine the frame safety factor and the precision level of CNC plasma cutting results. The research method used is a research and development model, namely the French model. This model has 8 steps that are used to produce a CNC plasma cut design. The data analysis technique used is descriptive statistical analysis techniques derived from the results of tests conducted. Safety factor testing was conducted using the 2015 Autodesk Inventor software with a frame of 110.54 N. The precision cutting results were carried out three times using the same ins

APA, Harvard, Vancouver, ISO, and other styles

37

Antara, Nengah Ludra. "Organic Waste Chopper Tool Design Using Autodesk Inventor 2015 Software." Logic : Jurnal Rancang Bangun dan Teknologi 19, no. 2 (2019): 68. http://dx.doi.org/10.31940/logic.v19i2.1379.

Full text

Abstract:

In the program of mechanical engineering, the software used to draw is Autodesk Inventor. Autodesk inventor is a CAD program in the program of engineering that is applied to the design of mechanics in 3D. In designing a tool, of course, it is preceded by a planned design concept. In making a design a tool requires a process or steps for making the design. These steps include the size, dimensions, and materials used in making organic waste chopper tool. The drawing process uses the 2015 Autodesk Inventor program, the first is the making of sketches, components on the machine, followed by assemb

APA, Harvard, Vancouver, ISO, and other styles

38

Antara, Nengah Ludra. "Organic Waste Chopper Tool Design Using Autodesk Inventor 2015 Software." Logic : Jurnal Rancang Bangun dan Teknologi 20, no. 2 (2020): 99–107. http://dx.doi.org/10.31940/logic.v20i2.1812.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Ivanov, E., A. Ivanov, S. Kozinchuk, and V. Saenko. "IMPROVEMENT OF CONSTRUCTION OF DRAWINGS OF WORM GEAR GEARS IN AUTODESK INVENTOR PACKAGE." Modern problems of modeling 16 (February 3, 2019): 121–27. http://dx.doi.org/10.33842/2313-125x/2019/16/121/127.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Amrulloh, Munir, Eko Nugroho, and Asroni Asroni. "Perancangan dan analisis electric car frame “Melumumet” menggunakan software Autodesk Inventor 2016." ARMATUR : Artikel Teknik Mesin & Manufaktur 2, no. 1 (2021): 41–46. http://dx.doi.org/10.24127/armatur.v2i1.742.

Full text

Abstract:

Frame atau rangka merupakan bagian penting dalam sebuah alat transportasi yang menyatukan semua komponen dan guna menahan beban yang bertumpu pada frame tersebut kesalahan dalam perancangan pembebanan akan mengakibatkan ketidak nyamanan saat frame akan diaplikasikan, dan juga akan mengurangi faktor keamanan, kenyamanan pengemudi dan penumpang saat digunakan, perancangan frame yang tepat akan memberikan hasil yang optimal antara tingkat keamanan dan kenyamanan, tujuan perancangan rangka kali ini untuk mengetahui displacement yang terjadi pada pada electric car frame menggunakan software autodes

APA, Harvard, Vancouver, ISO, and other styles

41

Fatkurocman, Andi, and Ach Kusairi Samlawi. "ANALISA KEGAGALAN KOMPONEN DRIVE PINION GEAR PADA SWING MOTOR EXCAVATOR CATERPILLAR 349D." JTAM ROTARY 2, no. 1 (2020): 79. http://dx.doi.org/10.20527/jtam_rotary.v2i1.2006.

Full text

Abstract:

Penelitian ini bertujuan untuk mengetahui alasan fraktur yang terjadi pada drive pinion gear unit motor swing Excavator Caterpillar 349 d. Dalam penelitian ini dilakukan beberapa tahapan yaitu pengamatan visual dan pengamatan makro, pengujian komposisi struktur logam, dan pemodelan load and latch menggunakan Autodesk Inventor 2014 sebelum mendapatkan hasil akhir. Hasil yang diperoleh dari penelitian ini adalah bahwa ada kurangnya presisi antara pinion drive dan planetary gear karena pin planet yang tidak dapat berfungsi sebagai pemegang planetary gear sehingga rotasi planet rentan terhadap tab

APA, Harvard, Vancouver, ISO, and other styles

42

Frătiţa, M., K. Uzuneanu, and D. T. Balanescu. "About I-beam versus H-beam connecting rod design using Inventor Autodesk 2018." IOP Conference Series: Materials Science and Engineering 444 (November 29, 2018): 072008. http://dx.doi.org/10.1088/1757-899x/444/7/072008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Hendrawan, Andre Budhi, and Nur Aidi Ariyanto. "Rancang Bangun Mesin CNC Router 3 Axis Berbantu Perangkat Lunak Autodesk Inventor 2015." Nozzle : Journal Mechanical Engineering 9, no. 2 (2020): 31–37. http://dx.doi.org/10.30591/nozzle.v9i2.2260.

Full text

Abstract:

Mesin cnc router ini merupakan alat untuk membantu para pengusaha dibidang produk kreatif terutama yang berkaitan dengan seni ukir-mengukir yang membutuhkan kecepatan, ketepatan dan kualitas produk yang tinggi. Dengan mesin ini para pengusaha dapat menghasilkan produk dengan kapasitas yang banyak dan seragam sehingga barang yang dihasilkan akan sama dan konsisten. Mesin cnc router yang akan dibangun menggunakan 3 axis dalam pengoperasiannya dan bersifat portable yang bertujuan untuk mempermudah dalam penempatan. Mesin router ini memiliki kapasitas yang terbatas dalam ukuran bahan baku yang dig

APA, Harvard, Vancouver, ISO, and other styles

44

Akhmadi, Amin Nur. "Rancang Bangun Mesin Shredder Pencacah Sampah Plastik Berbantu Perangkat Lunak Autodesk Inventor 2015." Nozzle : Journal Mechanical Engineering 8, no. 2 (2019): 28–33. http://dx.doi.org/10.30591/nozzle.v8i2.2217.

Full text

Abstract:

Mesin pencacah sampah plastik ini merupakan alat untuk membantu para pengepul dalam mencacah sampah plastik untuk mempermudah pembawaannya ke agen yang nantinya akan dijadikan bijih plastik. Dalam pengoperasiannya, mesin pencacah ini dibantu oleh beberapa komponen penunjang yaitu motor listrik, reducer, box mata pisau, dan rangka. Dan peranan dari komponen penunjang tersebut sangatlah penting, karena itu perlu dilakukan perancangan yang baik dan salah satunya yaitu dari segi kekuatan, dimana rangka mesin menerima beban dari beberapa komponen itu sendiri maupun dari sampah plastik yang akan cac

APA, Harvard, Vancouver, ISO, and other styles

45

Nurul Amri, Anief Awalia, and Wirawan Sumbodo. "Perancangan 3D Printer Tipe Core XY Berbasis Fused Deposition Modeling (FDM) Menggunakan Software Autodesk Inventor 2015." Jurnal Dinamika Vokasional Teknik Mesin 3, no. 2 (2018): 110–15. http://dx.doi.org/10.21831/dinamika.v3i2.21407.

Full text

Abstract:

The purpose of this research are to determine the mechanical strength of a 3D Printer frame design of type Core XY using Autodesk Inventor 2015 and to assess the build quality of the 3D Printers. This is an R&D research following the Pahl & Beitz’s methods which comprises of the following stages: Task or specifications, planning and clarification, conceptual design, embodiment design, and detailed design. Data were analyzed using descriptive statistics. The results show that the mechanical strength of the 3D printer frame is satisfactory and is proven by the Autodesk Inventor 2015 anal

APA, Harvard, Vancouver, ISO, and other styles

46

Setyono, Bambang. "PERANCANGAN DAN ANALISIS KEKUATAN FRAME SEPEDA HIBRID “TRISONA” MENGGUNAKAN SOFTWARE AUTODESK INVENTOR." Jurnal IPTEK 20, no. 2 (2016): 37. http://dx.doi.org/10.31284/j.iptek.2016.v20i2.43.

Full text

Abstract:

<p>Sepeda <em>hybrid</em> trisona adalah sepeda yang digerakkan oleh tiga sumber gerak, yaitu gerak manual oleh engkol kaki, gerak motor pneumatik udara bertekanan, dan gerak motor listrik. Penelitian ini bertujuan untuk merancang dan menganalisis kekuatan frame dengan variasi beban pengemudi mulai dari 0 – 95 kg menggunakan <em>software autodesk inventor</em>. Dengan menggunakan fitur <em>Stress Analysis</em> yang dilengkapi dengan metode <em>finite element analysis (FEA),</em> dapat diketahui luaran berupa <em>von misses stress, dis

APA, Harvard, Vancouver, ISO, and other styles

47

Saptari, Asep Yusup, S. Hendriatiningsih, Dony Bagaskara, and Levana Apriani. "IMPLEMENTATION OF GOVERNMENT ASSET MANAGEMENT USING TERRESTRIAL LASER SCANNER (TLS) AS PART OF BUILDING INFORMATION MODELLING (BIM)." IIUM Engineering Journal 20, no. 1 (2019): 49–69. http://dx.doi.org/10.31436/iiumej.v20i1.987.

Full text

Abstract:

Building asset management is a system for organizing building assets in order to provide information to support decision making. One part of asset management is the inventory of building assets. Asset inventory can be done based on Building Information Modelling (BIM). BIM is one of the approaches to look at the building as a large unified database that can provide different information. The research case is theinventory of local government assets, especially state university assets because in Indonesia, state university assets belong to local government assets. The first step of local governm

APA, Harvard, Vancouver, ISO, and other styles

48

Podrigalo, N. "ALGORITHM FOR BUILDING SURFACE PROJECTIONS AND THE LINE OF THEIR CROSSING IN THE THREE-DIMENSIONAL SPACE OF THE COMPUTER AUTODESK INVENTOR PACKAGE." Modern problems of modeling 15 (June 13, 2019): 144–50. http://dx.doi.org/10.33842/2313-125x/2019/15/144/150.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Abioye, A., P. Atanda, O. Kolawole, et al. "The Thermal Analysis of Fuel Fired Crucible Furnace Using Autodesk Inventor Simulation Software." Advances in Research 5, no. 3 (2015): 1–7. http://dx.doi.org/10.9734/air/2015/16235.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Thamrin, Ismail, Astuti Astuti, Ellyanie Ellyanie, and Al Fiqhi Meizan Twista Herbian. "Analisis Tegangan Pada Mata Pahat Dalam Proses Pemesinan Bubut Menggunakan Software Autodesk Inventor 2016." MECHANICAL 9, no. 1 (2018): 22. http://dx.doi.org/10.23960/mech.v9.i1.201804.

Full text

Abstract:

Pada proses bubut, seluruh energi yang digunakan untuk pembentukan geram diubah menjadi kalor. Hal ini menyebabkan suhu pada zona pemotongan akan meningkat. Kalor yang dibangkitkan selama proses pemesinan bergantung terutama pada jenis pahat, material benda kerja, dan parameter proses seperti kecepatan potong, kedalaman potong dan gerak makan. Temperatur tinggi yang terdistribusi dengan baik selama proses pembubutan, memiliki pengaruh yang penting terhadap tegangan pada mata pahat. Maka dari itu perlu dilakukan analisa pengaruh sudut geram terhadap tegangan pada proses pembubutan titanium deng

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!