Relevant bibliographies by topics / Automatic meter reading (AMR)

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Automatic meter reading (AMR)'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Automatic meter reading (AMR).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Automatic meter reading (AMR)"

1

Tian, Yu. "Design of Remote Intelligent Meter Reading System." Advanced Materials Research 971-973 (June 2014): 1183–86. http://dx.doi.org/10.4028/www.scientific.net/amr.971-973.1183.

Full text
Abstract:
This paper discusses the design of a remote intelligent meter reading system, remote intelligent meter reading system by automatic meter data and remote transmission of the way, can solve the problem of the household metering, with automatic meter reading, automatic charging, prepaid management, arrears cut function. The design solves the inaccurate measurement and data change two technical problems of smart meter reading system, remote meter reading system is mainly composed of the meter measuring sensor, meter reading collector, bus adapter, water and gas meter measuring signal is converted to electrical signals by meter measurement sensor, carries on two times of measurement through meter reading collector, bus adapter connected all the meter reading acquisition, and then is connected with the computer management, so as to realize the reading meter data "remote" function.
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Huan Jin, Hong Yi Li, Kui Ming Sun, and Ling Song Yi. "Three-Meter AMR System with Grid Demand-Side Energy Management in Smart Home System." Applied Mechanics and Materials 473 (December 2013): 153–59. http://dx.doi.org/10.4028/www.scientific.net/amm.473.153.

Full text
Abstract:
A remote AMR system based on a STC90C52AD microcontroller and wireless network technology is presented in this paper to solve the problems in existing AMR system. Based on Smart Home system with grid demand side energy management, the automatic meter reading system centralizes electric power, water, gas meters, provides remote real-time automatic meter reading services and give instruction suggestions which contribute to energy management. Through the Web application platform, the users can use the Internet, mobile phones and other means to achieve the remote monitoring of the household appliances, energy-saving and saving house electricity costs. This AMR system has been implemented successfully by the State Grid Corporation Shandong Electric Power Group Corporation and the department of Automation of Wuhan University in collaboration.
APA, Harvard, Vancouver, ISO, and other styles
3

Xu, Xiang, San Feng Zhang, Rui Zhang, and Chun Nan Han. "Implementation of ZigBee and Image Picking Based Automatic Meter Reading System." Applied Mechanics and Materials 556-562 (May 2014): 4856–62. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.4856.

Full text
Abstract:
Automatic meter reading (AMR) system is known as the communication-based system to read meters. It is an application of smart home with high pertinence and practicability, which can bring on benefits to utility companies (living resources suppliers). The key to designing and implementing an AMR system is communication. Many communication modes have been proposed for AMR system. This paper proposes a ZigBee and Image Picking based Automatic Meter Reading System (ZIP-AMRS) and introduces its implementation in details. As its name suggests, the system uses ZigBee network and image picking technology to collect meter data. Tree routing protocol and end-to-end acknowledge mechanism are adopted to ensure reliable transmission. We installed and verified ZIP-AMRS in an office building, and got the real-time meter picture.
APA, Harvard, Vancouver, ISO, and other styles
4

Huang, He Song, Chuan Wei Yu, Zhen Lin Wang, and Ning Wang. "Research on the Wi-Fi Protocol Intelligent Automatic Meter Reading System." Advanced Materials Research 591-593 (November 2012): 1523–26. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.1523.

Full text
Abstract:
In view of the real-time, reliable and efficient requirements in data transmission of the automatic meter reading system, a remote automatic meter reading scheme based on the technology of Wi-Fi is proposed. Wi-Fi (sometimes spelled Wifi or WiFi) is a popular technology that allows an electronic device to exchange data wirelessly (using radio waves) over a computer network, including high-speed Internet connections. Based on the transmission technology of Wi-Fi, this article introduces a remote automatic meter reading system, which takes UART-WiFi module as core and allows the meter connected to the Internet, so as to realize the function of network remote automatic meter reading.
APA, Harvard, Vancouver, ISO, and other styles
5

Sai, Yao Zhang, and Ru Jian Ma. "Design of Wireless Automatic Meter Reading System." Advanced Materials Research 225-226 (April 2011): 966–69. http://dx.doi.org/10.4028/www.scientific.net/amr.225-226.966.

Full text
Abstract:
Community property management in metering and charging of resource and energy consumption, such as water, electricity and gas charging are a time-consuming, laborious, tedious and monotonous work. It also needs a large amount of computing and the computing requires high accuracy because the dispute will affect the social security easily. The current used meter reading and charging systems for resource and energy consumption of household are analyzed in this paper. The wireless automatic meter reading and charging systems are also discussed. A design scheme is proposed based on short-range wireless meter reading communication technology. The combination of CC1100 radio frequency module and GPRS network is used in the scheme. The system has the characteristics of low in price, simple in structure and good stability.
APA, Harvard, Vancouver, ISO, and other styles
6

Rahman, Fandisya, Achmad Basuki, and Ismiarta Aknuranda. "Pengambilan Data secara Bergerak pada Automatic Meter Reading Bertopologi Mesh." Jurnal Teknologi Informasi dan Ilmu Komputer 6, no. 1 (January 16, 2019): 1. http://dx.doi.org/10.25126/jtiik.201961695.

Full text
Abstract:
<p>Proses rekapitulasi informasi mengenai kuantitas pemakaian listrik, air, dan gas dari pelanggan perusahaan penyedia utilitas umumnya tersedia melalui proses pengumpulan data secara berkala. Proses pengumpulan/pencatatan data tersebut dilakukan oleh petugas yang berkunjung ke setiap rumah-rumah pelanggan secara periodik. Banyaknya rumah yang dikunjungi menyebabkan pekerjaan mencatat data menjadi berat dan memungkinkan terjadi kesalahan pencatatan. Data yang tidak akurat berkorelasi terhadap kerugian finansial yang ditanggung perusahaan penyedia utilitas. Berbagai teknologi untuk memudahkan pencatatan seperti (Automatic Meter Reading) AMR telah diterapkan, tetapi masih memiliki permasalahan dalam proses pengiriman data dari perangkat pencatat ke pusat basis data. Penelitian ini mengusulkan pengembangan teknologi AMR dengan menerapkan mekanisme pengambilan data secara bergerak dan nirkabel dengan topologi jaringan mesh. Setiap perangkat AMR diasumsikan sebagai perangkat statis yang terhubung secara topologi jaringan mesh dengan perangkat AMR lain yang saling berdekatan dan dapat bertindak sebagai relay untuk kemudian mengirimkan data ke perangkat pencatat bergerak yang digunakan oleh petugas atau disebut perangkat Mobile Data Gathering(MDG). Perangkat pencatat MDG dapat mengumpulkan data secara bergerak mendekati salah satu perangkat AMR untuk mengumpulkan data dari seluruh perangkat AMR yang saling berdekatan. Kecepatan bergerak perangkat pencatat AMR berpengaruh dalam akurasi pencatatan dan jumlah data yang dapat dikumpulkan. Berdasarkan hasil uji simulasi dapat diketahui bahwa sistem pengumpulan data dengan mekanisme bergerak mampu mengumpulkan data dengan kecepatan terbaik 30 km/jam dengan jumlah data sebanyak 86% dari semua jumlah perangkat AMR.</p><p><em><strong>Abstract</strong></em></p><p><em>Recapitulation process information on the amount of electricity, water and gas from a utility provider of enterprise customers are generally available through periodic data gathering processes. The data gathering process mostly performed by officers who periodically visit each customers' house. The more number of houses to be visited, the heavier the workload for data recording and the recording errors may occur. Inaccurate data correlate with financial losses borne by utilities. Various techniques to facilitate the recording such as Automatic Meter Ready (AMR) have been applied, but the problem during data transmission of data from the recording device to the central database still exists. This research proposes the development of AMR technology by applying the mechanism of wireless data transfer with mesh network topology. Each AMR device is assumed static devices in a network topology connected to other AMR devices side by side and can act as a relay than the data sent to a mobile agent recording device. The AMR wireless recording device can collect data that moves closer to one of the AMR devices to collect data from all neighboring AMR devices. The speed of movement of the AMR recording device affects the accuracy of the recording and the amount of data that can be collected. The evaluation results show that the data gathering system with a movement mechanism suitable for data collection at the best speeds of 30 km/h with the successful data gathering around 86% of all AMR devices</em></p>
APA, Harvard, Vancouver, ISO, and other styles
7

Xie, Hao Fei, Qing Hua Chen, and Ping Wang. "Design of Wireless Heat Automatic Reading Meter Monitoring System." Advanced Materials Research 488-489 (March 2012): 1717–21. http://dx.doi.org/10.4028/www.scientific.net/amr.488-489.1717.

Full text
Abstract:
As the whole world values the energy-saving very highly, a monitoring system, which can monitor the precise heat consumption data and schedule on demand in time, is urgently needed. This paper presents a master station monitoring system of wireless heat automatic reading meter system (named as WiHeat-AMRS). It is mainly used for residential district heat-supply system whose main function is measuring heat, charging for heat, and monitoring the running status of the whole heat system. The master station monitoring system, which was designed and implemented by the author own, consists of two parts: monitoring component and back-end database. The paper focuses on the design of both monitoring component and back-end database structure. The monitoring component collects the data of each heat meter via a wireless gateway, analyzes those data, store in the database, and achieves the automated management of heat system. Meanwhile, the master station monitoring system has been put into service by our cooperative, and has gotten great reviews.
APA, Harvard, Vancouver, ISO, and other styles
8

Tian, Ye, Yan Feng Ren, and Guang Hua Wang. "The Design of the Ethernet Meter Reading System Based on Broadband Power Line." Advanced Materials Research 490-495 (March 2012): 2755–59. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.2755.

Full text
Abstract:
According to the current national conditions and the intelligent communities’ requirements on the electric energy metering system based on the broadband power line communication (PLC), this paper introduces a design program for achieving the remote meter reading through the broadband PLC technology. The system takes the high-performance single chip microcomputer and the Ethernet controller RTL8019AS as the core, the low-voltage power line as the medium of data communication, and makes the electronic meters access to the Ethernet via the broadband power line, thereby achieving the remote automatic meter reading. The multi-functional low-voltage power line remote meter reading system constituted by this system and the backstage management system together will have broad application prospects. In addition, this paper also makes a preliminary study on the reliability of the meter reading system.
APA, Harvard, Vancouver, ISO, and other styles
9

Yang, Yong Jie, Dong Hua Lv, and Xian Xian Lin. "Automatic Gas Meter Reading System Based on Wireless Sensor Network." Advanced Materials Research 424-425 (January 2012): 1270–73. http://dx.doi.org/10.4028/www.scientific.net/amr.424-425.1270.

Full text
Abstract:
In view of the current status and shortcomings of existing meter reading systems, in this paper, we proposed an automatic gas meter reading system based on the advantages of gas meter directly reading technology, WSN technology and GPRS technology, introduced the whole scheme and the design of hardware and software in detail. The system is consist of three level network. The first level network and the second level network use the different frequency during communication. It decreases the interface of each other during the translation of the data, and increase the lifetime of the smart gas meter. The system has the advantages of easy construct, flexible layout, lower power consumption
APA, Harvard, Vancouver, ISO, and other styles
10

Claudio, Karim, Vincent Couallier, Cyril Leclerc, Yves Le Gat, and Jérôme Saracco. "Consumption estimation with a partial automatic meter reading deployment." Water Supply 15, no. 1 (August 19, 2014): 50–58. http://dx.doi.org/10.2166/ws.2014.082.

Full text
Abstract:
Automatic water meter reading (AMR) is now the best kind of technology to supply real time information on water consumption. Complete equipment of a district metered area enables the assessment of the total consumption of a finite size population, for a time scale sometimes as short as an hour. However, its cost for generalization can generate high capital expenditures (CAPEX), unaffordable for the utility, in which case sampling techniques have to be set up. With the purpose of total consumption estimation, this article describes standard methods of survey techniques applied to water networks and proposes a methodology for implementation of an operational sample. The methodology, which includes some constraints on the estimator precision, proposes a smart AMR equipment plan of the population, while reducing CAPEX. Finally, estimation of the total consumption, in addition to the knowledge of supplied volume, enables more accurate loss assessment and potential detection of new leaks.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Automatic meter reading (AMR)"

1

Wallin, Fredrik. "New opportunities provided by the Swedish electricity meter reform." Doctoral thesis, Mälardalens högskola, Akademin för hållbar samhälls- och teknikutveckling, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-7852.

Full text
Abstract:
The reduction of the impact of energy consumption is a priority issue and a major challenge that concerns every country in the world. This is a complex task that needs to be tackled from several angles in the search for areas where optimizations and savings can be made. In Sweden an electricity meter reading reform was fully implemented by 1st July 2009, including 5.2 million customers, and this created new set of circumstances in the Swedish electricity market. The main purpose of this thesis work has been to investigate the possibilities of increasing the use of remote meter readings. Two research questions have been: “How can the electricity market benefit from remote collected meter readings?” and “Where do barriers appear when utilizing meter readings?”. The work started in 2000/2001 to study Internet based applications that visualize electricity consumption patterns. Over these years the daily internet users have increased from approximately 40 % to 73 % and new markets for web-based applications have evolved. These solutions can be important in the forthcoming years as energy portals that hold new energy services. Experiences from new installations indicate that at least interested customers do submit information concerning building and household properties through internet. Still, it is challenging to enable the majority of customers to take part in these new solutions. It may therefore be important to remind customers on a regular basis in order maintain the frequency using the application and to make it habitual. Further the introduction of demand-based pricing allows electricity distribution utilities to achieve a stronger correlation between peak loads in the distribution network area and their revenues.
APA, Harvard, Vancouver, ISO, and other styles
2

Xie, Kaicheng. "Automatic Utility Meter Reading." Cleveland State University / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=csu1270587412.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Aquilué, de Pedro Ricardo. "Power line communications for the electrical utility: physical layer design and channel modeling." Doctoral thesis, Universitat Ramon Llull, 2008. http://hdl.handle.net/10803/9138.

Full text
Abstract:
El món de les comunicacions per la xarxa elèctrica (CXE) pot ser dividit en tres grans tipus: CXE en baix voltatge (CXE-BV), en mig voltatge (CXE-MV) i en alt voltatge (CXE-AV). En aquests últims anys, les CXE-BV han atret una gran expectació, ja que les seves capacitats han fet d'aquesta tecnologia una bona opció com alternativa pel bucle local d'accés i pel desplegament de xarxes d'àrea local, focalitzades aquestes últimes en l'entorn domèstic. A més, les CXE-BV inclouen un conjunt d'aplicacions de baixa velocitat orientades a l'operador, com la lectura automàtica de comptadors (LAC), distribució de càrrega, facturació dinàmica, etc. Per altra banda, les CXE-MV i CXE-AV, històricament lligades a tasques de telecontrol i teleprotecció, s'estan començant a considerar com un canal de comunicacions eficient i fiable. El desenvolupament de sistemes digitals i els esforços d'estandardització estan fent d'aquests canals un medi atractiu per a que els operadors elèctrics ofereixin serveis de comunicacions, ja que no necessiten invertir en infraestructura perquè la xarxa elèctrica ja està desplegada.
En aquesta Tesi s'introduiran i es comentaran les particularitats de les tres xarxes elèctriques, després, es mostraran al lector les solucions tecnològiques existents pels canals de BV basats en la norma Europea CENELEC així com pels canals d'AV, mostrant que els sistemes actuals de LAC ofereixen una diversitat freqüencial molt baixa i que els mòdems CXE-AV estan ancorats en estendards antiquats.
Aquest treball es mou per les tres topologies de la xarxa, particularment, en aplicacions orientades a la banda CENELEC, en mesura i modelat de canal, i en mesura i disseny del nivell físic per sistemes CXE-BV, CXE-MV i CXE-AV respectivament. Els sistemes actuals que exploten la banda CENELEC ofereixen mecanismes d'explotació de la diversitat freqüencial del canal molt limitats o nuls, donant lloc a una baixa robustesa en front a interferències i soroll de fons acolorit. Aquest treball proposa un esquema de modulació multiportadora que, mantenint una complexitat baixa, ofereix unes altes prestacions permetent un bon nivell d'explotació de la selectivitat freqüencial. Per al que a CXE-MV respecta, aquesta Tesi desenvolupa un model de canal determinístic-estadístic pels anells urbans de distribució de potència i, finalment, en sistemes CXE-AV, aquest treball proposa, basat en mesures de canal i proves de camp, un nivell físic de banda ampla capaç de incrementar la velocitat de comunicació mentre manté una baixa densitat espectral de potència limitant així la interferència a altres sistemes.
PARAULES CLAU: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters.
El mundo de las comunicaciones por la red eléctrica (CRE) puede ser dividido en tres grandes tipos: CRE en bajo voltaje (CRE-BV), en medio voltaje (CRE-MV) y en alto voltaje (CRE-AV). En estos últimos años, las CRE-BV han atraído una gran expectación, ya que sus capacidades han hecho de esta tecnología una buena opción como alternativa para el bucle local de acceso y para el despliegue de redes de área local, focalizadas estas últimas en el entorno doméstico. Además, las CRE-BV incluyen un conjunto de aplicaciones de baja velocidad orientadas al operador como la lectura automática de contadores (LAC), distribución de carga, facturación dinámica, etc. Por otro lado, las CRE-MV y CRE-AV, históricamente ligadas a tareas de telecontrol y teleprotección, se están empezando a considerar como un canal de comunicaciones eficiente y fiable. El desarrollo de sistemas digitales y los esfuerzos de estandarización están haciendo de estos canales un medio atractivo para que los operadores eléctricos ofrezcan servicios de comunicaciones, ya que no necesitan invertir en infraestructura porque la red eléctrica ya está desplegada.
En esta Tesis se introducirán y se comentarán las particularidades de las tres redes eléctricas, luego, se mostrarán al lector las soluciones tecnológicas existentes para los canales de BV basados en la norma Europea CENELEC así como para los canales de AV, mostrando que los sistemas actuales de LAC ofrecen una diversidad frecuencial muy baja y que los módems CRE-AV están anclados en estándares anticuados.
Este trabajo se mueve por las tres topologías de red, particularmente, en aplicaciones orientadas a la banda CENELEC, en medida y modelado de canal, y en medida y diseño del nivel físico para sistemas CRE-BV, CRE-MV y CRE-AV respectivamente. Los sistemas actuales que explotan la banda CENELEC ofrecen mecanismos de explotación de la diversidad frecuencial del canal muy limitados o nulos, dando lugar a una escasa robustez frente a interferencias y ruido de fondo coloreado. Este trabajo propone un esquema de modulación multiportadora que, manteniendo una complejidad baja, ofrece unas altas prestaciones permitiendo un buen nivel de explotación de la selectividad frecuencial. Por lo que a CRE-MV respecta, esta Tesis desarrolla un modelo de canal determinístico-estadístico para los anillos urbanos de distribución de potencia y, finalmente, en sistemas de CRE-AV, este trabajo propone, basado en medidas de canal y pruebas de campo, un nivel físico de banda ancha capaz de incrementar la velocidad de comunicación mientras mantiene una baja densidad espectral de potencia limitando así la interferencia a otros sistemas.
PALABRAS CLAVE: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters.
The world of Power line communications (PLC) can be divided into three main types: low voltage PLC (LV-PLC), medium voltage PLC (MV-PLC) and high voltage PLC (HV-PLC). These last years, LV-PLC has attracted a great expectation since its wideband capabilities has made this technology a suitable choice for last-mile access and in-home communications. Moreover, LV-PLC also includes a utility oriented low frequency and low speed applications, such as automatic meter reading (AMR), load distribution, dynamic billing and so on. On the other hand, MV-PLC and HV-PLC, historically oriented to teleprotection and telecontrol tasks, are being considered as a reliable communication channel. The development of digital equipment and the standardization efforts are making those channels an attractive medium for electrical utilities telecommunications services, since the network, as well as in LV-PLC, is already deployed.
In this PhD dissertation, the three different PLC topologies are reviewed and the different communications techniques in such channels exposed. Then, a deep technological review of existing AMR solutions for the European CENELEC band, as well as HV-PLC systems is given, showing that existing AMR systems deliver low frequency diversity and HV-PLC systems are anchored in old fashioned standards.
This work walks around the three topologies, specifically, CENELEC band utility oriented applications, channel measurement and modeling and channel measurement and physical layer design, regarding LV-PLC, MV-PLC and HV-PLC respectively. Existing CENELEC compliant systems deliver low or none frequency diversity mechanisms, yielding in a low robustness against colored noise and interference. This work propose a multicarrier based physical layer approach that, while keeping the complexity low, delivers high performance allowing a great level of frequency diversity. Focusing on MV-PLC, a hybrid deterministic-statistical channel model for urban underground rings is developed and, finally, in HV-PLC systems, this work proposes, based on measurements and field tests, a wideband physical layer in order to increase data rate while keeping low both the power spectral density and possible interference to other systems.
KEYWORDS: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters.
APA, Harvard, Vancouver, ISO, and other styles
4

Bengtsson, Gustav, and Daniel Einås. "Investeringsbedömning av mätinsamlingssystem : för Mälarenergi Elnät AB." Thesis, Linköping University, Department of Management and Economics, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2224.

Full text
Abstract:

Detta examensarbete har genomförts vid Mälarenergi Elnät AB i Västerås. Undersökningen föranleddes av regeringsbeslutet om att elmätare måste avläsas en gång per månad från 2009. Konsekvensen för Mälarenergi är att de måste investera i ett automatiskt mätinsamlingssystem. Syftet med projektet har varit att skapa en generell investeringsmodell för att ekonomiskt utvärdera ett antal mätinsamlingssystem. I rapporten har Milabs, Seneas, Enermets, HM Powers, Iprobes samt Techems och Viterras system analyserats. Resultaten från investeringskalkylen visar att Mälarenergi kommer att göra en förlust på 5-8 MSEK/år under hela projektets livslängd (15 år). Den största delen av investeringen utgörs av hårdvarukostnader (50 %), medan drift- och underhållskostnader samt logistikkostnader utgör 20 % respektive 25 %. Mälarenergi Elnät bör budgetera 1 500-1 950 SEK/mätpunkt för projektet, beroende på systemval. En känslighetsanalys visar att driftskostnad och livslängd är avgörande faktorer, vilket medför att det är viktigare att satsa på ett robust och säkert system än det billigaste.

APA, Harvard, Vancouver, ISO, and other styles
5

Badiali, Edoardo. "I benefici dell'applicazione estesa della telelettura nella caratterizzazione della dotazione idrica." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2013. http://amslaurea.unibo.it/5427/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Arandia, Ernesto. "Spatial-Temporal Statistical Modeling of Treated Drinking Water Usage." University of Cincinnati / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1377870978.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Danisman, Batuhan. "Analysis Of Conventional Low Voltage Power Line Communication Methods For Automatic Meter Reading And The Classification And Experimental Verification Of Noise Types For Low Voltage Power Line Communication Network." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/12610469/index.pdf.

Full text
Abstract:
In this thesis, the conventional low voltage power line communication methods is investigated in the axis of automated meter reading applications and the classification and experimental verification of common noise types for low voltage power line communication network. The investigated system provides the real time transmission of electricity consumption data recorded by electricity meters, initially to a local computer via a low voltage line through a low speed PLC (Power Line Carrier) environment and subsequently to a corporate network through a high speed data transmission medium. The automated meter system provides a more effective tracking and data acquisition, a more detailed and vigorous knowledge about consumer behavior for subscriber assessment in electricity distribution in association with a brand new management and system supervision concept in electricity distribution control and management technology. The theoretical studies are experimentally verified for the Turkish low voltage power infrastructure through laboratory experiments performed in METU Electrical and Electronics Engineering Department, Electrical Machines and Drives Laboratory and R&
D Laboratories of MAKEL facilities in Hadimkö
y. The single phase voltage of the mains line between the phase and neutral is monitored to exhibit the disturbing effects of various noise sources. The resulting voltage spectrum is logged by using digital data acquisition devices in time and frequency domain. The waveforms are converted to frequency domain using the Fast Fourier Transform (FFT) functions of the MATLAB. The experimental results are compared to the theoretical findings obtained through literature survey.
APA, Harvard, Vancouver, ISO, and other styles
8

Navarro, Maristela Domeni. "Telemedição de medidores eletronicos de energia na rede de TV a cabo." [s.n.], 2006. http://repositorio.unicamp.br/jspui/handle/REPOSIP/259163.

Full text
Abstract:
Orientadores: Hermano Medeiros Ferrera Tavares, Marcos Carneiro da Silva
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e Computação
Made available in DSpace on 2018-08-07T03:17:59Z (GMT). No. of bitstreams: 1 Navarro_MaristelaDomeni_M.pdf: 2037867 bytes, checksum: a858cc3260dae4659d1b3cdfece3f4f9 (MD5) Previous issue date: 2006
Resumo: Este trabalho objetiva verificar a viabilidade da utilização da rede das operadoras de televisão à cabo para medição remota e tarifação diferenciada de energia elétrica para consumidores alimentados em baixa tensão - Grupo B. Envolve a criação de protótipos de hardware e software para controle da comunicação, obtenção dos dados e controle operacional dos medidores de energia executados remotamente a partir de uma central. A arquitetura implementada tem três elementos principais: o Ponto de Presença, instalado no quadro de medidores do consumidor; o Controlador Central de Comunicação, instalado na operadora de televisão à cabo, responsável pela comunicação com os Pontos de Presença monitorados e pela concentração e envio de informações ao Centro de Aplicações, o último elemento da arquitetura. Resultados foram coletados e avaliados, abordando aspectos como a viabilidade técnica, vantagens e desvantagens. Esse trabalho proporcionou ainda um breve estudo de novas formas de comunicação remota com medidores usando outros meios físicos de comunicação
Abstract: This work was developed to verify the viability to use the cable TV infra-structure for remote measurement and billing for consumers fed in low tension - Group B. It involved the creation of hardware and software prototypes for control of the communication to collecting data remotely of the energy meter from a central office. The implemented architecture has three main elements: the Point of Presence, installed at the consumer side; the Central Controller, installed in the Cable TV headend, responsible for the communication with the Points of Presence and for the concentration and sending of information to the Application Center, the last element of the architecture. Results had been collected and evaluated, taking into account aspects as the viability technique, advantages and disadvantages. This work still provided a briefing study of new ways of remote communication with the energy meters using other infra-structure of communication
Mestrado
Automação
Mestre em Engenharia Elétrica
APA, Harvard, Vancouver, ISO, and other styles
9

Stuart, Graeme. "Monitoring energy performance in local authority buildings." Thesis, De Montfort University, 2011. http://hdl.handle.net/2086/4964.

Full text
Abstract:
Energy management has been an important function of organisations since the oil crisis of the mid 1970’s led to hugely increased costs of energy. Although the financial costs of energy are still important, the growing recognition of the environmental costs of fossil-fuel energy is becoming more important. Legislation is also a key driver. The UK has set an ambitious greenhouse gas (GHG) reduction target of 80% of 1990 levels by 2050 in response to a strong international commitment to reduce GHG emissions globally. This work is concerned with the management of energy consumption in buildings through the analysis of energy consumption data. Buildings are a key source of emissions with a wide range of energy-consuming equipment, such as photocopiers or refrigerators, boilers, air-conditioning plant and lighting, delivering services to the building occupants. Energy wastage can be identified through an understanding of consumption patterns and in particular, of changes in these patterns over time. Changes in consumption patterns may have any number of causes; a fault in heating controls; a boiler or lighting replacement scheme; or a change in working practice entirely unrelated to energy management. Standard data analysis techniques such as degree-day modelling and CUSUM provide a means to measure and monitor consumption patterns. These techniques were designed for use with monthly billing data. Modern energy metering systems automatically generate data at half-hourly or better resolution. Standard techniques are not designed to capture the detailed information contained in this comparatively high-resolution data. The introduction of automated metering also introduces the need for automated analysis. This work assumes that consumption patterns are generally consistent in the short-term but will inevitably change. A novel statistical method is developed which builds automated event detection into a novel consumption modelling algorithm. Understanding these changes to consumption patterns is critical to energy management. Leicester City Council has provided half-hourly data from over 300 buildings covering up to seven years of consumption (a total of nearly 50 million meter readings). Automatic event detection pinpoints and quantifies over 5,000 statistically significant events in the Leicester dataset. It is shown that the total impact of these events is a decrease in overall consumption. Viewing consumption patterns in this way allows for a new, event-oriented approach to energy management where large datasets are automatically and rapidly analysed to produce summary meta-data describing their salient features. These event-oriented meta-data can be used to navigate the raw data event by event and are highly complementary to strategic energy management.
APA, Harvard, Vancouver, ISO, and other styles
10

Kukla, Zdeněk. "Vzdálené měřicí systémy a jejich praktické využití." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217602.

Full text
Abstract:
This master’s thesis is dealing with remote measuring systems and their utilization in power engineering. In the first part there are described requirements on an autonomous measuring system and description of AMM and AMR systems. Communicating and data flows working on accurately defined communicating layers are also depicted in this part. The attention is devoted to the possibility of data processing and functions of devices offered by these attributes. In the following part there are described reasons for utilization of remote measuring systems in power engineering and the main advantages of connection of more devices into one unit. After finding of required parametres and functions of systems, a suggestion of terminal device is created in the same way. The suggestion is described in the measuring part with A/D converter, processing in microprocessor, measuring and evaluating alogorithms and attributes of communication of bus used. The last part is devoted to utilization of remote analysis in small power stations in dispersed production. Formation of deformation of voltage, harmonic analysis of signal and its application for data processing are described there. Described analysis was tested on data acquired from a cogeneration unit.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Automatic meter reading (AMR)"

1

Schlenger, Donald L. Automatic meter reading for the water industry. Denver, Colo: Published by the AWWA Research Foundation and American Water Works Association, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Johnson, Virgil. Electric Meter Reading Handbook 2nd Edition Automatic Meter Reading Updates. 2nd ed. Virgil Johnson Technical Publishing, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Johnson, Virgil. Water Meter Reading Handbook 1st Edition with Automatic Meter Reading Updates. Virgil Johnson Technical Publishing, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Guide to automatic meter reading: A tutorial. Arlington, Va: National Rural Electric Cooperative Association, Cooperative Research Network, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Associates, Baytel, and FIND/SVP (Firm), eds. Utility meter reading: The markets for automatic and remote systems. New York, NY: FIND/SVP, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Association, Automatic Meter Reading, ed. Directory of automatic meter reading and energy management products & services. [United States]: Automatic Meter Reading Association, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Construction Engineering Research Laboratories (U.S.), ed. Demonstration of an automatic meter reading system in Army family housing. Champaign, IL: U.S. Army Construction Engineering Research Laboratories, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

IEEE standard for automatic meter reading via telephone--: Network to telemetry interface unit. New York, N.Y., USA: Institute of Electrical and Electronics Engineers, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Automatic meter reading (AMR)"

1

Ayman, Naim, Abdessadek Aaroud, and Said Saadani. "An Automatic System for Water Meter Index Reading." In Advances in Intelligent Systems and Computing, 320–27. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12065-8_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dbabseh, Esraa, and Radwan Tahboub. "Framework for Securing Automatic Meter Reading Using Blockchain Technology." In Advances in Intelligent Systems and Computing, 435–41. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70416-2_56.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Qian, BingYun, and Song Zhu. "The Design of Remote Automatic Meter-Reading System’s Communicational Reliability." In Advances in Intelligent and Soft Computing, 423–28. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-28655-1_67.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Hongqing, Juan Wang, Bing Bai, and Chuang Lu. "Automatic Reading Algorithm of Pointer Water Meter Based on Deep Learning and Double Centroid Method." In Advances in Intelligent Systems and Computing, 477–85. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4575-1_46.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Choi, Moonsuk, Seongho Ju, Yonghun Lim, and Jong-mock Baek. "Design and Performance Analysis of Automatic Wireless Routing Mechanism for the Effective Formation of IMR (Integrated Meter Reading) Network." In Communication and Networking, 493–500. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-10844-0_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Advanced Automated Meter Reading (AMR)." In Encyclopedia of Wireless Networks, 13. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-319-78262-1_300020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yaacoub, Elias. "Can LTE-A Support Real-Time Smart Meter Traffic in the Smart Grid?" In Exploring the Convergence of Big Data and the Internet of Things, 261–81. IGI Global, 2018. http://dx.doi.org/10.4018/978-1-5225-2947-7.ch018.

Full text
Abstract:
The chapter investigates the scheduling load added on a long-term evolution (LTE) and/or LTE-Advanced (LTEA) network when automatic meter reading (AMR) in advanced metering infrastructures (AMI) is performed using internet of things (IoT) deployments of smart meters in the smart grid. First, radio resource management algorithms to perform dynamic scheduling of the meter transmissions are proposed and shown to allow the accommodation of a large number of smart meters within a limited coverage area. Then, potential techniques for reducing the signaling load between the meters and base stations are proposed and analyzed. Afterwards, advanced concepts from LTE-A, namely carrier aggregation (CA) and relay stations (RSs) are investigated in conjunction with the proposed algorithms in order to accommodate a larger number of smart meters without disturbing cellular communications.
APA, Harvard, Vancouver, ISO, and other styles
8

Mehul, Ekata, and Rahul Shah. "Energy Management System Using Wireless Sensor Network." In Handbook of Research on Green ICT, 377–84. IGI Global, 2011. http://dx.doi.org/10.4018/978-1-61692-834-6.ch027.

Full text
Abstract:
Currently, there are global efforts being made for energy saving. Lot of efforts are being done exploring the generation of alternative resources of energy – also called renewable energies which includes solar, nuclear, water and wind, to name but a few. Besides investigations of renewable energies, a global attempt is also being made to save energy consumption and reduce carbon emissions. A need to have a comprehensive Energy Management System could not have been felt more by both businesses and individuals. This Chapter describes features required for a complete system of energy management focusing on Electrical Energy. The system is designed making use of wireless sensor network & standard protocols. Chapter will address firstly the theoretical aspects of energy management followed by the detailed model for Automatic Meter Reading concept. We will focus on the features of such an Energy Management System & limits our scope to the detailing of Automatic Meter Reading concept and design.
APA, Harvard, Vancouver, ISO, and other styles
9

Mehul, Ekata, and Rahul Shah. "Energy Management System Using Wireless Sensor Network." In Green Technologies, 515–23. IGI Global, 2011. http://dx.doi.org/10.4018/978-1-60960-472-1.ch308.

Full text
Abstract:
Currently, there are global efforts being made for energy saving. Lot of efforts are being done exploring the generation of alternative resources of energy – also called renewable energies which includes solar, nuclear, water and wind, to name but a few. Besides investigations of renewable energies, a global attempt is also being made to save energy consumption and reduce carbon emissions. A need to have a comprehensive Energy Management System could not have been felt more by both businesses and individuals. This Chapter describes features required for a complete system of energy management focusing on Electrical Energy. The system is designed making use of wireless sensor network & standard protocols. Chapter will address firstly the theoretical aspects of energy management followed by the detailed model for Automatic Meter Reading concept. We will focus on the features of such an Energy Management System & limits our scope to the detailing of Automatic Meter Reading concept and design.
APA, Harvard, Vancouver, ISO, and other styles
10

De Craemer, Klaas, Geert Deconinck, and Matthias Stifter. "Protocols for Automatic Meter Reading." In Industrial Communication Technology Handbook, 60–1. CRC Press, 2017. http://dx.doi.org/10.1201/b17365-62.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Automatic meter reading (AMR)"

1

Hwang, Kwang-il, Doo soon Park, Sang-Soo Yeo, and Jong Hyuk Park. "Energy-Efficient Meter Data Aggregation Protocol for (AMR) Automatic Meter Reading Networks." In 2009 Fourth International Conference on Embedded and Multimedia Computing (EM-Com 2009). IEEE, 2009. http://dx.doi.org/10.1109/em-com.2009.5402967.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ali, A., N. H. Saad, N. A. Razali, and N. Vitee. "Implementation of Automatic Meter Reading (AMR) using radio frequency (RF) module." In 2012 IEEE International Conference on Power and Energy (PECon). IEEE, 2012. http://dx.doi.org/10.1109/pecon.2012.6450340.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ali Khan, Muhammad Yousaf, Muhammad Ibrahim, Muhammad Ali, Hamayun Khan, and Ehtasham Mustafa. "Cost Benefit Based Analytical Study of Automatic Meter Reading (AMR) and Blind Meter Reading (BMR) used by PESCO(WAPDA)." In 2020 3rd International Conference on Computing, Mathematics and Engineering Technologies (iCoMET). IEEE, 2020. http://dx.doi.org/10.1109/icomet48670.2020.9073904.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sikora, A. "C6.2 - Design, Simulation, and Verification of Highly Portable and Flexible Communication Stacks for Automatic Meter Reading (AMR)." In AMA Conferences 2013. AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany, 2013. http://dx.doi.org/10.5162/sensor2013/c6.2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Biranje, Amit, and S. S. Lokhande. "Wireless ARM-Based Automatic Meter Reading & control system (WAMRCS)." In 2015 International Conference on Pervasive Computing (ICPC). IEEE, 2015. http://dx.doi.org/10.1109/pervasive.2015.7087019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Clay, M. R. J. "Advanced meter reading (AMR) tokenless prepayment." In Eighth International Conference on Metering and Tariffs for Energy Supply. IEE, 1996. http://dx.doi.org/10.1049/cp:19960487.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

da Silva Alves, Debora Cristina Costa, Joaquim Blesa, and Eric Duviella. "DETECÇÃO DE VAZAMENTOS EM REDES DE DISTRIBUIÇÃO DE ÁGUA." In XVIII CEEL – Conferência de Estudos em Engenharia Elétrica. Universidade Federal de Uberlândia, 2020. http://dx.doi.org/10.14295/2596-2221.xviiiceel.2020.548.

Full text
Abstract:
A detecção de vazamento em redes de distribuição de água é de suma importância para a manutenção do sistema garantido um melhor funcionamento e economia de água. Esse artigo aborda a proposta de um método de detecção de vazamento baseado na análise de demanda de água. É utilizados dados históricos sem vazamentos para obter os valores mínimos, máximos e e distribuições estatísticas de diferenças (erros) entre o fluxo de demanda. O método proposto se beneficia das bases de sensor fusion para desenvolver uma análise capaz de analisar o fluxo em todas as horas do dia, não apenas durante a noite. É utilizado uma janela de tempo móvel para aumentar a recisão do método. O método é avaliado com dados reais de Distrito de Medição e Controle (DMC) de Barcelona e dados simulados de uma rede hipotética que apresenta a singularidade de 89% do sistema possuir AMRs (Automatic meter reading ) .
APA, Harvard, Vancouver, ISO, and other styles
8

Primicanta, Aryo Handoko, Mohd Yunus Nayan, and Mohammad Awan. "Hybrid Automatic Meter Reading System." In 2009 International Conference on Computer Technology and Development. IEEE, 2009. http://dx.doi.org/10.1109/icctd.2009.114.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Abdollahi, Ali, Marjan Dehghani, and Negar Zamanzadeh. "SMS-based Reconfigurable Automatic Meter Reading System." In 2007 IEEE 22nd International Symposium on Intelligent Control. IEEE, 2007. http://dx.doi.org/10.1109/isic.2007.4359642.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Abdollahi, Ali, Marjan Dehghani, and Negar Zamanzadeh. "SMS-based Reconfigurable Automatic Meter Reading System." In 2007 IEEE International Conference on Control Applications. IEEE, 2007. http://dx.doi.org/10.1109/cca.2007.4389381.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Automatic meter reading (AMR)' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography