To see the other types of publications on this topic, follow the link: Automation Studio 6 Software.
Journal articles on the topic 'Automation Studio 6 Software'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 journal articles for your research on the topic 'Automation Studio 6 Software.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.
1
Chaudhary, Narendra, and Niharika Thakur. "Modeling and Printing of Successive Misaligned Teeth Stages." World Journal of Dentistry 8, no. 4 (2017): 309–14. http://dx.doi.org/10.5005/jp-journals-10015-1456.
Full textAbstract:
ABSTRACT Introduction Patients suffering from problems related to teeth crowding and misalignment require braces for realignment and restoring of perfect teeth. This process of realignment is a long-term treatment varying from 6 to 12 months including many stages during which teeth alignments are achieved in small steps. Patients are always eager to view their futuristic teeth alignment condition at the beginning of their treatment. This requires a predictive methodology on the part of the dentist, which is achievable using software tools and finally reproducing these software-designed stages using rapid prototyping. Materials and methods Dental molds, 3D Scanner, 3D Printer, and 3D computer-aided design software, such as 3-Matic, Maestro ortho studio, 3D Orchestrate, or 3Shape ortho studio for manipulations. Results According to the quantitative analysis, average variation between the preprint and postprint is 0.32. Threedimensional (3D) printed models of these stages are within the units of 0.01 mm; hence, the rapid prototyping method supplements automation of the complete procedure of teeth alignment. Whereas, qualitative analysis of the scans after printing shows little-distorted boundaries due to which clarity has been slightly decreased but, according to the experts, this is clinically acceptable. Conclusion In this study, we provide an insight into generating different aligned stages or steps using available 3D software and further 3D printing of these stages using polylactic acid models. Clinical significance These models are expected to provide very important and tangible information related to the treatment purpose to both patients and dentists. These 3D models further provide platform for the manufacturing of customized transparent teeth aligners which are specific to the patient, better in esthetics, easy to wear, and is inexpensive than traditional teeth braces. How to cite this article Thakur N, Chaudhary N, Juneja M, Jindal P. Modeling and Printing of Successive Misaligned Teeth Stages. World J Dent 2017;8(4):309-314.
2
НІКОНОВ, ОЛЕГ, ВЛАДІСЛАВА СКІДАН, АНТОНІНА ВОЛІВАЧ та МАРАТ САТАЄВ. "ІНФОРМАЦІЙНА СИСТЕМА ДЛЯ АВТОМАТИЗОВАНИХ СЕРВІСІВ МАЛИХ ПІДПРИЄМСТВ". Herald of Khmelnytskyi National University. Technical sciences 329, № 6 (2023): 253–57. https://doi.org/10.31891/2307-5732-2023-329-6-253-257.
Full textAbstract:
The purpose of this work is to research information systems for automated services of small businesses based on the use of mobile software applications to enhance their efficiency and competitiveness. Enhancing efficiency and competitiveness is a primary trend in the development of small businesses in modern business ecosystems. In the face of increasing competition and rapid changes in business ecosystems, companies are improving their processes using new technologies and strategies that open up new opportunities for growth and development, as well as ensure their resilience in business ecosystems. The automation of services for small businesses is a development direction that contributes to increasing their efficiency and competitiveness. This work investigates information systems for automated services of small businesses based on the use of mobile software applications, using service sector companies as an example. Based on the analysis of existing mobile applications for service-oriented businesses, a mobile application of an automated system «Digital Device Repair» has been developed using Microsoft Visual Studio tools. The developed configuration consists of three functional subsystems, implementing multi-level access rights to functional components and ensuring optimized handling of customer orders. A three-tier architecture is chosen for the development of the mobile application software system, which includes components: a client application connected to an application server, which is in turn connected to a database server. A functional model of an information system for automated services for small businesses has been developed using the example of the mobile application «Digital Device Repair».
3
Al-Had, Istabraq Hassan Abed, Farag Mahel Mohammed, and Jamal A.-K. Mohammed. "Modeling and simulation of electro-hydraulic telescopic elevator system controlled by programmable logic controller." Indonesian Journal of Electrical Engineering and Computer Science 27, no. 1 (2022): 71–78. https://doi.org/10.11591/ijeecs.v27.i1.pp71-78.
Full textAbstract:
Traditional hydraulic cylinders are widely used in industry as load lifting tools. There is difficulty in employing these cylinders in narrow installation space like building elevators as well as they require a long working stroke, so solving this problem requires using the telescopic hydraulic cylinder instead. This cylinder is a unique hydraulic cylinder design that uses a sequence of decreasing diameters to create a long operating stroke in a compact-retracted form. In this work, the Auto Station software is used to build a telescopic hydraulic cylinder model that includes hydraulic elements such as double-acting hydraulic telescopic cylinders, pump, valves, pipeline, and filter, as well as electrical parts such as programmable logic controller (PLC), push-bottoms, and position sensors. The proposed model is operated by a PLC controller and has three floors with an overall height of around 300 cm for lifting a 100 kg payload. The accuracy and validity of this model in lifting big weights were demonstrated by the analytical findings of characteristic curves for cylinder position and velocity. This model can be used a basic reference to analyze and construct hydraulic cylinders with any number of stages. The findings of simulations reveal that a quick change in pressure due to phase change causes multi-phase vibration.
4
Sujata, S. K., and S. Aithal P. "Inset-fed Multiband Square Patch Antenna on Flexible substrate for Fifth-Generation Wireless Communication." International Journal of Applied Engineering and Management Letters (IJAEML) 5, no. 2 (2021): 106–18. https://doi.org/10.5281/zenodo.5689664.
Full textAbstract:
<strong>Purpose</strong>: <em>Over a decade, the antenna has sparked considerable interest in the 5G frequency band in the wireless domain (covering industrial applications, home automation and mobile communication) because of its numerous advantages like compact, conformal to surfaces, easily integrated with the devices, etc. In general, an Antenna can be defined as a conductor which is exposed to space operable for a specific application. The purpose of the study is to design the Slotted patch antenna for 5G applications on a flexible dielectric substrate material which makes the antenna compact in its design aspect<strong>.</strong></em> <strong>Design/Methodology/Approach</strong>: <em>Initially, the antenna design is carried out using the theoretical framework based on the available equations. The microwave studio software - Computer Simulation Technology (CST) is used to create and model the different antennas. </em> <strong>Findings/Result: </strong><em>Based on the simulated models, </em><em>the slotted patch antenna design 5 has 2 bands namely: 3.25 GHz, the return loss is -17.47 dB, and 5.89GHz, the return loss is -21.37dB. Whereas design 6 has 4 resonant bands measured at 2.04 GHz, the return loss (RL) is -11.68 dB, at 5.80GHz, the RL is -22.36 dB, at 7.14 GHz, the RL is -28.71 dB and at 8.83 GHz, the RL is -13.36 dB. The maximum bandwidth achieved for slotted patch antenna design 5 is 5% and the maximum bandwidth achieved for slotted patch antenna design 6 is 8%. Whereas the design of Multi slotted patch antenna flexible substrate design 7 and design 8 has the maximum achieved bandwidth of 10 %</em>. <strong>Originality/Value: </strong><em>The design of slotted patch and multi slotted patch antenna using inset feed method on a flexible substrate for 5G frequency band. </em> <strong>Paper Type: </strong><em>Design based</em> <em>Research Analysis.</em>
5
Ortegón-Sarmiento, Tatiana, and Carol Serrano-Acuña. "Simulación de los subprocesos de llenado, tapado y pasteurizado para la automatización de una planta cervecera." Respuestas 21, no. 2 (2016): 57. http://dx.doi.org/10.22463/0122820x.772.
Full textAbstract:
Antecedentes: La simulación de procesos es una herramienta útil en el diseño, análisis y evaluación de estos, facilitando así su optimización y monitoreo, y permitiendo la predicción de su comportamiento ante ciertas situaciones. Objetivo: Por lo anterior, en este artículo se presenta la simulación de un proceso cervecero, haciendo especial énfasis en los subprocesos de llenado, tapado y pasteurizado. Método: Se identificaron cada uno de los pasos de un proceso cervecero, y se caracterizaron los subprocesos de interés, definiendo cada una de las variables de entrada y salida. A continuación, se simularon los subprocesos haciendo uso del controlador lógico programable PLC S7-1500, y se supervisó el comportamiento de cada uno de estos mediante SIMATIC WinCC, de manera local en una pantalla HMI (Interfaz Hombre Máquina), y de manera remota en un ordenador. La dinámica del proceso se presenta en el software Automation Studio 6, el cual se conecta al PLC mediante el servidor OPC de IBH. Para observar el comportamiento del sistema ante ciertas situaciones de emergencia se implementaron alarmas. Resultados: La simulación realizada permite seguir paso a paso los subprocesos de interés, tanto de manera local como remota, permitiendo observar el comportamiento del sistema en condiciones normales o ante situaciones de emergencia a las cuales el simulador responde de manera inmediata. Conclusiones: Con base en los resultados obtenidos, se concluye que el simulador es una alternativa adecuada y de bajo costo que permite comprender, supervisar y predecir el comportamiento que tendría la planta real, en cuanto a los subprocesos de interés.Palabras Clave: Automatización, Control Automático, Controlador Lógico Programable, Diseño de Sistemas, Programación, Simulación de Procesos.
6
Votinov, M., and O. Smirnova. "ARCHITECTURAL DESIGN AND TYPES OF VISUALISATION OF INNOVATIVE ARCHITECTURAL OBJECTS." Municipal economy of cities 6, no. 180 (2023): 43–50. http://dx.doi.org/10.33042/2522-1809-2023-6-180-43-50.
Full textAbstract:
The study is devoted to the modern practical experience of the formation of innovative architectural objects in the urban environment, highlighting the peculiarities of their architectural design and visualisation. Clarifying key concepts and terms necessary for defining the issues of designing and visualising these innovative architectural objects, such as architectural idea, architectural creativity, architectural concept, architectural environment, architectural form, and model, is a focal point. Theoretical exploration and analysis of the experiences of forming innovative architectural objects reveal them to be complex and unique structures, buildings, and complexes in the urban environment. Creating such objects demands careful consideration of various influencing factors, including urban planning, architectural planning, constructional, ecological, aesthetic, and economic aspects. The article considers different types of architectural design and visualisation of innovative architectural objects. Furthermore, the concept of ‘visualisation’ is defined as a specific way of demonstrating the nature of the model of architectural objects. We highlighted the role of automated design systems in creating innovative architectural objects, showcasing their ability to save time due to the automation of many typical operations and ensure maximum accuracy of drawings. The discussion extends to the features of using two-dimensional and three-dimensional computer graphics and animation. Two-dimensional computer graphics are a collection of images created with the help of a computer, while three-dimensional graphics are intended to simulate photography or video recording of pre-prepared three-dimensional objects. The main functions of three-dimensional graphics programs are defined as the creation of three-dimensional objects and two-dimensional drawings, visualisation of 3D drawings, and calculation functions. The article identifies the most common software for creating innovative architectural objects and their surrounding environment, including AutoCAD, ArchiCAD, and 3D Studio MAX. Artlantis R, SketchUp, Maya, Cinema 4D, SolidWorks, V-Ray, and Blender, among others, are also used for visualising innovative architectural objects. A few advantages of using modern computer architectural design and visualisation capabilities have been revealed. Notably, the realistic graphic demonstration of a projected 3D model of an innovative architectural object provides the most comprehensive idea of its future appearance and the nature of its surroundings. Such a model makes it possible to see the object from different angles in the exterior as well as evaluate its quality characteristics in the interior. We conclude by outlining prospective trends in the design and visualisation of innovative architectural objects, underscoring the ongoing evolution in this dynamic field. Keywords: architectural design, visualisation, innovations, architectural object, environment.
7
Szczęsny, S., M. Naumowicz, and A. Handkiewicz. "SI-Studio – environment for SI circuits design automation." Bulletin of the Polish Academy of Sciences: Technical Sciences 60, no. 4 (2012): 757–62. http://dx.doi.org/10.2478/v10175-012-0087-5.
Full textAbstract:
Abstract The current work is an answer to the problem of designing switched-current (SI) circuits, which is usually a complex issue in the field of microelectronics. The mentioned task is a source of many mistakes and takes a lot of time for designers, therefore authors of the article decided to propose a software solution. This article presents an environment for design automation of analogue circuits in the switched currents technique. It points out the utility advantages of the described tools, which make the work of a VLSI designer much easier, moreover offering a possibility to parameterise the design process considering power consumption, chip area usage and its working speed. It also presents results of an automatic generation of a filter pair circuit, as well as a DCT circuit - automatically generated with the proposed SI-Studio software tools.
8
Agustiawan, Iwan, Eka Taufiq Firmansjah, and Wahyu Nugroho. "Perancangan Sistem Kontrol Mesin Packing Buncis Otomatis Berbasis Programmable Logic Controller (PLC) Di Gabungan Kelompok Tani (Gapoktan) Lembang Agri." Jurnal Rekayasa Energi dan Mekanika 3, no. 2 (2024): 101. http://dx.doi.org/10.26760/jrem.v3i2.101.
Full textAbstract:
ABSTRAK Tingginya kebutuhan ekspor sayuran buncis kenya, membuat para petani Lembang Agri harus menjaga kualitas dan kuantitas dari produk yang di ekspor. Oleh karena itu para petani membutuhkan mesin yang dapat membantu proses packing sayuran buncis secara otomatis. Dengan adanya mesin packing sayuran buncis otomatis diharapkan dapat meningkatkan produktivitas, safety, dan meningkatkan kualitas produk. Mesin packing buncis kenya otomatis yang dirancang menggunakan Programmable Logic Controller (PLC). PLC berperan dalam sistem kendali jalannya konveyor dan aktuator. Caranya dengan mengatur massa buncis yang akan di input pada sensor loadcell, bobot buncis yang akan ditimbang yaitu 250gr dan 350gr. Oleh karena itu dalam penelitian ini dibahas mengenai sistem kontrol mesin packing buncis otomatis yang berbasis kendali Programmable Logic Controller (PLC) menggunakan Software Automation Studio dan Software Zelio Soft. Dari Software yang digunakan menghasilkan Program ladder yang siap di upload ke PLC dengan 2 bobot massa yang berbeda, skema input output PLC dan wiring diagram. Kata kunci : Mesin Packing, Buncis Kenya, PLC, Automation Studio, Zelio Soft. ABSTRACT The high export needs of Kenyan beans, make Lembang agri farmers must maintain the quality and quantity of products exported. Therefore, farmers need a machine that can help the packing process of beans automatically. With the automatic packing machine, green beans are expected to increase productivity, safety, and improve product quality. One of them is the use of automatic kenya bean packing machines based on Programmable Logic Controller (PLC). PLC plays a role in the control system of conveyors and actuators. The trick is to adjust the mass of beans that will be input to the load cell sensor, the weight of the beans to be weighed is 250gr and 350gr. Therefore, this research discusses the automatic bean packing machine control system based on Programmable Logic Controller (PLC) control using Automation Studio Software and Zelio Soft Software. The software used produces a ladder program that is ready to be uploaded to the PLC with 2 different mass weights, a PLC input output scheme and a wiring diagram. Key words : Packing Machine, Beans kenya, PLC, Automation Studio, Zelio Soft.
9
Margaret Teacher Banjarnahor and Lucia Sri Istiyowati. "Smoke Automation and Regression Testing on a peer-to-peer lending Website with the Data-DrivenTesting Method." Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi) 6, no. 4 (2022): 684–91. http://dx.doi.org/10.29207/resti.v6i4.4220.
Full textAbstract:
Software testing is considered as one of the most important processes in software development as it checks whether the system meets the requirements and specifications of the users. The testing process manually or automatically aims to ensure that the main features are not errors and function during development. The manual process frequently causes the publication time of a feature could not to be punctual. This study aims to create an automation script with the data-driven testing method during smoke and regression testing to ensure the quality, especially the main functions or features, can run normally and not be disturbed by the development of new features that are easily understood. One of Various decent automation tools for testing web applications is Katalon Studio which is based on the Selenium tool. The results of the research that have been carried out show that the process of automation of software testing by applying a script automation tool made with Katalon Studio which applies the data-driven testing method is very good with an achievement rate of 80,21%. The automation tools that are built are easy to use, can be learned quickly, are not too complicated and make users want to use it again. 
10
Katarzynski, P., M. Melosik, and A. Handkiewicz. "gC-Studio – the environment for automated filter design." Bulletin of the Polish Academy of Sciences: Technical Sciences 61, no. 2 (2013): 541–44. http://dx.doi.org/10.2478/bpasts-2013-0054.
Full textAbstract:
Abstract The paper presents the idea of software suite integrating the tools supporting the analog filter design. It uses the prototype circuits that are composed of gyrators and capacitors. The essential, behavioral parameters are characterised for the filtering structures. The basic assumptions formulated before the implementation are also mentioned. The structure of the software suite is discussed, its functional properties and the implementation issues are mentioned. The resulting software brings the automation of designing SISO filters as well as the filter pairs. In the proposed solution the VHDL-AMS language is assumed as the formal method of hardware description.
11
Cao, He, and Wei Hua Wu. "Simulation Study on Deep Hole Drilling Machine Hydraulic System Based on System Schematic Diagram." Advanced Materials Research 136 (October 2010): 144–47. http://dx.doi.org/10.4028/www.scientific.net/amr.136.144.
Full textAbstract:
Aiming at the issues of cumbersome modeling process and complicated programs, the hydraulic system simulation software automation studio is introduced, which is based on system schematic diagram. Taking the hydraulic system of deep hole drilling machine for example, by using automation studio, the motor’s input pressure and flow are simulated and studied, and this system is debugged on bosch rexroth experiment table, the parameter test results are basically the same with their simulation results. This simulation method can accurately simulate the system’s working state, simplify the process of modeling and parameter adjustment, and provide a good way for hydraulic system design and dynamic characteristic study.
12
Sun, Yue Hua, Hong Tao Li, and Chun Sheng Liu. "Analysis of Automatic Welding Finned Tube Hydraulic System Based on Automation Studio." Advanced Materials Research 199-200 (February 2011): 416–20. http://dx.doi.org/10.4028/www.scientific.net/amr.199-200.416.
Full textAbstract:
This article use Automation Studio simulation software to make analysis on rib tube welding machine hydraulic system.Briefly introduces the software, theoretically analye welding machine hydraulic system, using software to make a detailed analysis on push (pull) acting hydraulic cylinder to push and pull two movements operation By analyzing the stable running speed, equal in size and opposite in direction which is consistent with reality step process.
13
Вдович, С. А., and И. А. Цыганова. "Automation of solving the problem of choosing a software development tool based on multicriteria optimization methods." Экономика и предпринимательство, no. 1(138) (April 15, 2022): 1120–24. http://dx.doi.org/10.34925/eip.2022.138.1.221.
Full textAbstract:
В статье рассматривается проблема выбора программного обеспечения для освоения технологии программирования обучающимися вузов. Определены критерии и альтернативы выбора. Разработано программное средство для решения многокритериальных задач оптимизации с использованием методов Парето, аддитивной свертки, анализа иерархий. Обоснован выбор IDE Microsoft Visual Studio. The article deals with the problem of choosing software for the development of programming technology by university students. Criteria and alternatives of choice are defined. A software tool has been developed for solving multicriteria optimization problems using Pareto methods, additive convolution, and hierarchy analysis. The choice of IDE Microsoft Visual Studio is substantiated.
14
Dosoftei, Constantin-Catalin. "Simulation Power vs. Immersive Capabilities: Enhanced Understanding and Interaction with Digital Twin of a Mechatronic System." Applied Sciences 13, no. 11 (2023): 6463. http://dx.doi.org/10.3390/app13116463.
Full textAbstract:
Automation Studio, a specialised simulation software, offers virtual commissioning capabilities and robust tools for modelling the behaviour and performance of a pneumatic robot controlled by a PLC. Conversely, Unity is a versatile platform primarily used for creating high-quality 3D games and interactive simulations, providing immersive experiences with DTs through mixed-reality environments. This paper provides a study that compares and contrasts the simulation power of Automation Studio and the immersive capabilities of Unity in the context of developing digital twins for a mechatronic system. This research explores how these complementary approaches enhance the development, validation, understanding, and interaction with digital twins. By examining both platforms in this context, the article provides valuable insights for engineers, developers, and researchers looking to create digital twins for mechatronic systems, but not only. This study demonstrates the potential of leveraging the combined power of simulation and immersive capabilities to improve the interaction between the real robotic arm manipulator cylindrical type and its digital twin in different scenarios, using an OPC approach for mirroring. The combination of Automation Studio and Unity provides a powerful platform for applied science education in the field of the digital twin of mechatronic systems.
15
Choi, Yong K., and Salhah Alomairi. "USING SOCIAL MEDIA TO UNDERSTAND FAMILY CAREGIVER PERSPECTIVES ON ASSISTIVE TECHNOLOGY FOR PERSONS WITH ALS." Innovation in Aging 6, Supplement_1 (2022): 818. http://dx.doi.org/10.1093/geroni/igac059.2944.
Full textAbstract:
Abstract ALS Forum (alsforums.com) is an online support group for those who have motor neuron disease or amyotrophic lateral sclerosis (ALS). It provides information, advice, connection, care, and assistance to persons living with ALS and their family caregivers. This study aimed to analyze the online discussion posts by caregivers of persons with ALS and assess their perceptions, experiences, and challenges of using assistive technologies (AT). Posts were extracted from the ALS caregiver discussion forum via web scraping using Python in March 2022. The extracted posts are dated between June 2005 and January 2022. The total number of posts and replies generated during this period was 52,292 by 2,397 unique users. Additional searches were conducted using assistive technology-related keywords to create the text dataset. A total of 263 posts by 137 unique users were identified. After the initial review, 186 posts were included in the final analysis. Thematic analysis revealed six major themes: (1) Uses of AT (automation/control, communication, mobility); 2) Barriers and Facilitators (cost, effort to learn new technology, rejection, interoperability, customer service); 3) Usability (hardware and software-related); 4) Sharing Experience on AT; 5) Giving Advice; 6) Seeking Information on AT. The findings are consistent with previous literature that online health discussion forums provide access to rich data that contains lived experiences of patients and caregivers. The findings may inform the design of future assistive technology that incorporates the patients’ and caregivers’ perspectives to increase the adoption and long-term sustainability of the technology for people living with ALS and their caregivers.
16
Endryansyah, Endryansyah, Bambang Suprianto, Puput Wanarti Rusimamto, Nurhayati Nurhayati, and Lilik Anifah. "Utilization of Automation Studio Software to Enhance the Ability to Design Ladder Diagrams for 3-Phase Motor Control Systems." International Journal of Research and Innovation in Social Science VIII, no. XII (2025): 1273–84. https://doi.org/10.47772/ijriss.2024.8120107.
Full textAbstract:
This study investigated the effectiveness of Automation Studio software in enhancing electrical engineering students’ ability to design ladder diagrams for three-phase motor control systems. Using a quasi-experimental pretest-posttest design, 30 students participated in a four-week training program. Data were collected through competency assessments focusing on basic knowledge, component analysis, problem-solving, and system design. The results revealed significant improvements across all areas: average scores increased from 54 to 92 in basic knowledge (70%), 52 to 78 in component analysis (51%), 52 to 80 in problem-solving (54%), and 33 to 80 in system design (143%). These findings demonstrate the software’s capacity to bridge the gap between theoretical knowledge and practical application, fostering critical thinking and technical proficiency. This research highlights the potential of simulation-based learning tools like Automation Studio to enhance engineering education, equipping students with industry-relevant skills and preparing them for complex technological challenges.
17
Soesanto, Anthony Carl, and Viany Utami Tjhin. "Using Katalon Studio for Automation Testing Development of Risk Management Applications Using the Scrum Method at PT. Teknologi Nirmala Olah Daya Informasi." Cakrawala Repositori IMWI 7, no. 3 (2024): 1205–16. http://dx.doi.org/10.52851/cakrawala.v7i3.711.
Full textAbstract:
Software testing is a crucial stage in the software development cycle, and it can be divided into two main categories: manual testing and automated software testing. Automated testing can be further divided into Uni, Integration, and UI testing. This paper analyzes the scenario testing process and evaluation results using the Katalon Studio automation testing tool. The data taken from the manual test is a test case from the user acceptance test (UAT) document, while the automatic test data uses the Katalon studio tool. Then, the results of manual testing and automated testing will be compared. As a result of testing, automatic testing of the Harmonie application was successfully carried out. The data shows that automated testing with Katalon tools is 31.90% faster than manual testing. This study highlights the benefits of using automated testing for software development.
18
Mandal, Dipankar. "Development of a Multipurpose Cold Storage Design Software MCS BCKV." International Journal of Engineering Science & Advanced Technology ISSN: 2250-3676 4, no. 6 (2014): 519–35. https://doi.org/10.5281/zenodo.215212.
Full textAbstract:
The paper proposes development of an interactive, flexible and user friendly software for designing a multipurpose cold storage in Visual Studio Express Desktop2012 environment and evaluation. The developed software 'MCS BCKV' has a criterion for typical load estimation and designing of cold storage, selection of evaporator, compressor and condenser in developing country. Load estimating and designing through computer automation is likely to make a positive impact in the dynamic nature of cold storage applications.
19
Ghinea, M., M. Agud, and M. Bodog. "Simulation of Pneumatic Systems Using Automation StudioTM Software Platform." International Journal of Simulation Modelling 19, no. 4 (2020): 655–66. http://dx.doi.org/10.2507/ijsimm19-4-541.
Full textAbstract:
Nowadays, more and more industrial applications use pneumatic systems instead of hydraulic, electrical or mixed systems. This article presents the applicability of pneumatic engines for compressed air vehicles (CAV) from the perspective of their simulation on the Automation Studio software platform. It is desired to use the mechanical work produced by only pneumatic cylinders taken over by a mechanical system that transforms the linear motion into a rotational one, this helping to propel the CAV. A feature of this engine is the limited quantity of compressed air at disposal (a reservoir). Also, the most efficient operation of the pneumatic cylinders is studied to achieve the operation with low consumption of compressed air, thus leading to increased performances. The current simulation was run without the use of specific electric/electronic equipment (PLC /PACs). Therefore, the pneumatic devices had assured the command and control of the system.
20
Khamidullin, Marat R., Gulnara A. Gareeva, Vladimir A. Petrochenko, Yuri M. Filatov, and Danil M. Abdullin. "DEVELOPMENT OF SOFTWARE TO AUTOMATE THE PREPARATION OF THE CLIENT BASE FOR THE FORMATION OF THE EXECUTION ENVIRONMENT UPDATE." International Journal of Advanced Studies 13, no. 3 (2023): 257–69. http://dx.doi.org/10.12731/2227-930x-2023-13-3-257-269.
Full textAbstract:
The development of software products for process automation is becoming more and more in demand. One of the main directions is the creation of software to automate the preparation of the client base to form the execution environment update, which allows the business to significantly simplify and optimize this process.
 Purpose: describe the development of a program in C# using MS Visual Studio 2019 to automate writing data to a MySQL database and adding them to an HTML page, including receiving data from the user and creating a convenient and intuitive interface.
 Method and methodology of the work: description of the development of a program in C# using MS Visual Studio 2019 to automate writing data to a MySQL database and adding them to an HTML page with a user-friendly interface.
 Results: program with a UI interface has been developed to automate the preparation of the client base for the formation of an update.
 Scope of the results: programming, automation of writing data to a MySQL database and adding it to an HTML page.
21
Holubek, Radovan, Daynier Rolando Delgado Sobrino, Peter Košťál, and Roman Ružarovský. "Offline Programming of an ABB Robot Using Imported CAD Models in the RobotStudio Software Environment." Applied Mechanics and Materials 693 (December 2014): 62–67. http://dx.doi.org/10.4028/www.scientific.net/amm.693.62.
Full textAbstract:
Current trend in automation area is focused to the innovation in all fields of the technologies and technological devices. Probably industrial robots and manipulators belong to development too. Industrial robots and manipulators belong to progressive elements of automation. Modern concept uses the offline programming as a tools integration of the virtual CAD models into programming environment. Offline programming carries a lot of advantages for example possibility of the programming without real robot system, possibility of the collision state debugging. Implementation of CAD models in virtual environment of Robot studio achieves better workplace station of creating robotic system and also it generates rather trajectories of the robot path in this system.
22
Zhou, Hu, Yue Li, Hong Chang Zhou, and Ping Ping Wu. "Application of SVG in Hand-Tufted Carpet Tufting Automation." Applied Mechanics and Materials 644-650 (September 2014): 2641–46. http://dx.doi.org/10.4028/www.scientific.net/amm.644-650.2641.
Full textAbstract:
To change the traditional manual production mode of hand-tufted carpet which features low efficiency and long production cycle, a CAM system for tufting process in hand-tufted carpet manufacturing has been proposed. The pattern in the format of SVG was studied as the object, and a set of graphic analytic software has been developed on the platform of Visual Studio, it can parse all the element nodes in a SVG document to calculate the feature points corresponding to every color and simulate the tufting path dynamically on the screen. Then dedicated NC code was generated for the open CNC system to use. And the software has provided a solution for accurate estimation of consumption of different color dyed yarn.
23
Liu, Dong Wen, Ya Kai Chen, Zhi Yong Qiao, Shu Jiang, Juan Juan Zhang, and Ting Ting Wang. "Research on Electronic Measuring Technology with Development of Total Station Coordinate Traverse Adjustment Program." Advanced Materials Research 1014 (July 2014): 371–74. http://dx.doi.org/10.4028/www.scientific.net/amr.1014.371.
Full textAbstract:
This paper presents a method for measuring total station coordinate traverse, and the method of using indirect adjustment and rigorous indirect adjustment with restrictions Based on Visual Studio 2010 programming environment ,use C # programming language,GDI + graphics processing and software engineering technology to research related program design.The Program is designed to achieve the automation, intelligence and high precision of outcome traverse adjustment.
24
Adisty Yudianto Putri, Dinda, Nur Cahyo Wibowo, and Prasasti Karunia Farista Ananto. "IMPLEMENTASI PENGUJIAN BLACKBOX MENGGUNAKAN AUTOMATION TESTING TOOLS PADA WEBSITE MONITORING BALITA." JATI (Jurnal Mahasiswa Teknik Informatika) 9, no. 3 (2025): 4278–85. https://doi.org/10.36040/jati.v9i3.13627.
Full textAbstract:
Sistem Informasi Balita (SIBAL) merupakan aplikasi berbasis web yang dirancang untuk membantu ahli gizi dalam memantau status gizi balita di Puskesmas Plamongan Sari. Pengujian terhadap aplikasi ini diperlukan untuk memastikan fungsionalitasnya berjalan sesuai spesifikasi sebelum diterapkan secara luas. Permasalahan yang dihadapi adalah keterbatasan pengujian sebelumnya yang hanya dilakukan secara manual dan terbatas pada skenario positif, sehingga berpotensi menyebabkan kesalahan atau kekurangan yang tidak terdeteksi. Penelitian ini bertujuan untuk menerapkan metode blackbox testing dengan automation testing tools, khususnya Katalon Studio, guna meningkatkan efisiensi dan akurasi pengujian. Metode yang digunakan mengikuti tahapan Software Testing Life Cycle (STLC), mulai dari analisis kebutuhan, perencanaan pengujian, pengembangan test case, persiapan lingkungan uji, eksekusi pengujian, hingga evaluasi hasil. Hasil pengujian menunjukkan bahwa seluruh 10 fitur utama aplikasi berfungsi dengan baik tanpa ditemukannya bug, dengan rata-rata waktu eksekusi sebesar 34,59 detik. Temuan ini membuktikan bahwa penggunaan blackbox testing dengan Katalon Studio efektif dalam memastikan kualitas perangkat lunak sebelum implementasi di lingkungan pengguna akhir.
25
Dewandra Sapto Prasetyo and Widya Silfianti. "ANALISIS PERBANDINGAN PENGUJIAN MANUAL DAN AUTOMATION TESTING PADA WEBSITE E-COMMERCE." Jurnal Ilmiah Teknik 2, no. 2 (2023): 127–31. http://dx.doi.org/10.56127/juit.v2i2.516.
Full textAbstract:
Pengembangan perangkat lunak, terutama yang menggunakan pendekatan agile, tidak akan dipisahkan dari tahap pengujian. Sebuah aplikasi tidak akan terlepas dari error atau bugs. End-to-end testing merupakan teknik testing yang memiliki cakupan besar dan dimungkinkan menghabiskan banyak waktu dalam pelaksaannya, sementara kini masa development cycle dari sebuah software semakin singkat. Pada saat melakukan proses pengujian perangkat lunak atau sistem, pengujian perlu dijalankan tidak hanya secara manual, namun juga secara otomatis menggunakan automated testing tools. Penelitian ini bertujuan melakukan analisis kompilasi manual testing dan automation testing menggunakan tools Katalon Studio pada salah satu website e-commerce di Indonesia. Penelitian dilakukan dengan melakukan pengujian manual dan automation testing sebanyak 5 kali iterasi. Hasil penelitian menunjukkan bahwa automation testing berjalan lebih cepat daripada pengujian manual.
26
Widianto, M. Iqbal, Emridawati Emridawati, and Hafif HR. "METODE PENGGARAPAN MUSIK ILUSTRASI THE SOUND OF CRUSADES." Laga-Laga : Jurnal Seni Pertunjukan 7, no. 2 (2021): 108. http://dx.doi.org/10.26887/lg.v7i2.2077.
Full textAbstract:
The Sound of Crusades merupakan sebuah komposisi musik ilustrasi yang dibuat untuk mengekspresikan dan menghadirkan suasana perang salib melalui musik kepada para pendengarnya. Penggarapan komposisi ini berasal dari peristiwa perang salib, yaitu perang agama antara umat Islam dengan Kristen Eropa selama dua abad (akhir abad ke-11 sampai abad ke-13). Musik ini diolah dengan menggunakan perangkat elektronik seperti; hardware dan software untuk memproduksi musik multimedia, diantaranya; komputer, speaker monitor, midi controller, headset monitor, software Digital Audio Workstation, Virtual Studio Technology dan Virtual Studio Technology Instrument serta fitur Automation, Velocity dan Fx. Musik ini tergolong musik programa, dimana di dalamnya terdapat adegan dan cerita dengan visual slide gambar. Komposisi musik ini dibagi menjadi tiga bagian sesuai dengan alur cerita yang terjadi pada perang salib. Hasil akhir dari komposisi musik ilustrasi ini, berupa visualisasi video yang berisikan slide ilustrasi gambar perang salib.
27
Xu, Peng, Jian Yong Han, and He Cao. "Simulation Analysis of Hydraulic System of Air Tightness Measurement Equipment for Tubeless Wheel Based on Automation Studio." Advanced Materials Research 889-890 (February 2014): 363–68. http://dx.doi.org/10.4028/www.scientific.net/amr.889-890.363.
Full textAbstract:
The air tightness measurement equipment for tubeless wheel was introduced and its principle of hydraulic and electrical complex system was analyzed, then the simulation platform was established by Automation Studio software. The work principle and running situation of the system are presented visually and dynamically, which reflects the demand of actual work. In addition, the available tool is offered for failure analysis and technology training by this method.
28
Muhammad Arfian Alfi Rachmadhani and Endryansyah Endryansyah. "Ladder Diagram Control Sistem Conveyor untuk Proses Painting dan Sandblasting Berbasis Elektro-Hidrolik." JURNAL TEKNIK ELEKTRO 14, no. 2 (2025): 200–208. https://doi.org/10.26740/jte.v14n2.p200-208.
Full textAbstract:
Dalam industri manufaktur modern, otomatisasi memainkan peran penting dalam meningkatkan efisiensi dan kualitas produksi. Salah satu tahapan kritis dalam proses fabrikasi struktur adalah finishing, yang mencakup sandblasting dan pengecatan. Penelitian ini membahas rancangan sistem conveyor berbasis elektro-hidrolik untuk proses sandblasting dan painting yang dikendalikan menggunakan PLC (Programmable Logic Controller) dan sensor proximity agar proses dapat berjalan secara otomatis. metode penelitian yang digunakan bersifat kuantitatif dengan pendekatan simulasi menggunakan Software Automation Studio. perancangan sistem ini melibatkan integrasi berbagai komponen seperti push button, sensor proximity, solenaoid valve, serta motor 3 fasa yang dikendalikan melalui ladder diagram pada PLC. Pengujian menunjukkan bahwa sistem yang dirancang mampu mengontrol pergerakan conveyor, mengaktifkan dan menonaktifkan proses sandblasting serta painting secara otomatis berdasarkan deteksi material oleh sensor proximity. hasil penelitian menunjukkan bahwa penerapan PLC dan sensor proximity dapat meningkatkan efisiensi serta memastikan konsistensi kualitas dalam proses finishing. Untuk pengembangan lebih lanjut, disarankan implementasi sistem monitoring berbasis Internet of Things (IoT) guna meningkatkan pemantauan performa sistem secara real-time. Kata Kunci: conveyor, elektro-hidrolik, sensor proximity, motor 3 fasa, PLC, Automation Studio.
29
Messina, Gaetano, and Guido Tricomi. "Software standardization integrating industrial automation systems." Computers in Industry 25, no. 2 (1994): 113–24. http://dx.doi.org/10.1016/0166-3615(94)90042-6.
Full text
30
Wu, Li, Bing Yang Zhang, Yan Li Jia, and Jian Guo. "Development Of Automatic Sampling System Based On ARM." Applied Mechanics and Materials 66-68 (July 2011): 2266–71. http://dx.doi.org/10.4028/www.scientific.net/amm.66-68.2266.
Full textAbstract:
Aim at the demand of analytical automation of sampling pretreatment, we designed an automatic sampling system which used ARM9 for microprocessor. The system designed in this paper is based on the processor of S3C2440 and the Windows CE operating system, and completed the work of programming in Visual Studio 2005. It uses stepping motors and precision pump as implementing agencies, and TA8435H as the stepping motor’s driver, uses LCD touch screen as human-computer interface. We accomplished software development in a customized Windows CE6.0 operating system. The paper mainly makes the detailed introduction to this system’s hardware platform design and software design based on WINCE embedded operation system.
31
RABENOK, A. "PREPARATIONS DURING THE IMPLEMENTATION OF PROJECT MANAGEMENT SOFTWARE AT ENTERPRISES." Экономическая наука сегодня, no. 6 (December 21, 2017): 238–46. http://dx.doi.org/10.21122/2309-6667-2017-6-238-246.
Full textAbstract:
The problems of implementation of means of enterprise management automation are considered, in particular, the article considers the problems of patchwork automation of project management. Existing methods that consider preparations for the implementation of project management automation tools are analyzed. The algorithm of preparations for implementation of project management automation in the enterprise is proposed, taking into account the balance of organizational factors and functional capabilities of software. Algorithm can be used in the enterprise that plans to implement the automation of project management.
32
Shlaifer, M., and Oleh Mykytyn. "Improvement of the information security of the management system." Management and Entrepreneurship in Ukraine: the stages of formation and problems of development 2022, no. 2 (2022): 148–55. http://dx.doi.org/10.23939/smeu2022.02.148.
Full textAbstract:
The study is aimed at researching ways to improve the information support of the management system using software. The authors determined that automation allows to reduce the time required to perform basic management functions, it is used for calculations and analysis, design, quality control, planning of all operational processes, hiring and accounting of employees, etc. An information system is a combination of technical, software and organizational support, as well as personnel, designed to provide the right people with the right information in a timely manner. To implement the automation system, you need functional software such as an OPS server, a control system service, a database server, a recipe editor, and SCADA. It has been proven that a modern automated management system should combine the maximum possible set of functions for managing all business processes of the enterprise. We determined that for the effective functioning of enterprise services, the following requirements are placed on the quality of information: сomplexity (the information should reflect all aspects of the service in relation to external conditions), promptness (receiving input information must occur simultaneously with the course of the process in the management system or coincide with the moment of its completion), systematicity (the necessary information should be provided as continuously as possible), reliability (information should be formed in the course of fairly accurate measurements). To improve the management information system in the organization, it was proposed to use such programs as AnyLogic, Aris, Business Studio, MS Visio. Their functionality was compared and the best system for automating the management system was determined. It was determined that, in our opinion, the software product Business Studio is the priority as a software tool in the direction of service support, because from the user's point of view it meets the necessary requirements. The advantages of this product are a free demo version, available reference materials and the availability of example models.
33
Kechin, E. V. "Development of software for automation of preparation of scientific research results in medicine." Modern technologies in ophtalmology, no. 4 (June 15, 2024): 22–23. http://dx.doi.org/10.25276/2312-4911-2024-4-22-23.
Full textAbstract:
Актуальность. Вопросы статистического анализа результатов научных исследований в медицине требуют от специалистов с медицинским образованием знаний и навыков в несвойственной для них области, а именно математической статистики. Вместе с тем обработка данных, интерпретация и написание результатов исследований требуют значительных временных затрат. Имеющееся программное обеспечение не позволяет решить данные вопросы в полной мере, что и определило Цель.настоящего исследования. Цель.Разработать программное обеспечение (ПО) для автоматического статистического анализа, описания и представления результатов научных исследований в медицине. Материал и методы. Для разработки ПО автор использовал язык программирования Python 3 и редактор кода Visual Studio Code («Microsoft»). Результаты. Разработано ПО, обеспечивающее автоматизированное вычисление описательной статистики, оформленной в готовом для представления результатов специализированном виде. ПО проводит автоматизированный сравнительный анализ с использованием наиболее часто требующихся статистических критериев в научных исследованиях в медицине. ПО формирует Результаты. в виде таблиц в формате .xlsx и сопровождает готовой текстовой интерпретацией полученных результатов для научных статей, а также диссертационных работ. В автоматизированном виде формируются информативные и наглядные графики, которые в т.ч. сопровождаются подписью данных с указанием уровней статистической значимости результатов сравнительного анализа. Выводы.Применение разработанного автором программного обеспечения значительно сокращает временные затраты на статистическую обработку данных, написание и представление результатов исследования, а также способствует повышению качества научных исследований в медицине.
34
Asmara, Dody Yuli, and Endryansyah Endryansyah. "Perancangan Sistem Transfer Station Barang Pada Sistem Penyortiran Otomatis Menggunakan Teknologi Elektro-Pneumatik." JURNAL TEKNIK ELEKTRO 13, no. 2 (2024): 174–81. https://doi.org/10.26740/jte.v13n2.p174-181.
Full textAbstract:
Kebutuhan sistem penyortiran otomatis meningkat karena pertumbuhan bisnis dan volume barang. Sistem ini dapat meningkatkan efisiensi, mengurangi kesalahan, dan mempercepat pengiriman. Penelitian ini merancang sistem transfer station barang pada sistem penyortiran otomatis menggunakan teknologi elektro-pneumatik. Tujuannya untuk meningkatkan efisiensi dan akurasi penyortiran. Metode penelitian eksperimental digunakan. Rancangan sistem dibuat dengan software Automation Studio dan pengujian 3D dengan software factory IO. Sistem terdiri dari konveyor, silinder pneumatik, solenoid valve, dan sensor proximity. Hasil pengujian menunjukkan sistem bekerja dengan baik. Sistem dapat memindahkan barang secara otomatis dan diintegrasikan dengan sistem penyortiran otomatis dan teknologi elektro-pneumatik. Sistem ini meningkatkan efisiensi dan akurasi penyortiran barang dan dapat digunakan di berbagai industri. Kata Kunci: Sistem Transfer Station, Sistem Penyortiran Otomatis, Teknologi Elektro-Pneumatik, Konveyor, Silinder Pneumatik, Solenoid Valve, Sensor Proximity.
35
Myasoedov, Sergey A. "SOFTWARE FOR AUTOMATION OF SPACE IMAGE RECOGNITION." Interexpo GEO-Siberia 6 (May 21, 2021): 207–12. http://dx.doi.org/10.33764/2618-981x-2021-6-207-212.
Full textAbstract:
The article discusses the main universal systems for working with remote sensing data - services that provide software for automated recognition of urban infrastructure objects in space images. The functions that these products can perform and their structure are considered.
36
Ayuningtyas, Putri Kusuma, Dwi Atmodjo WP, and Pratiwi Rachmadi. "Performance And Functional Testing With The Black Box Testing Method." International Journal of Progressive Sciences and Technologies 39, no. 2 (2023): 212. http://dx.doi.org/10.52155/ijpsat.v39.2.5471.
Full textAbstract:
Software testing is an essential stage in software development because it plays a role in maintaining the quality of the software produced. The objective of software testing is for verification and validation, namely ensuring that the software being developed works according to the expected functions when the software is designed. In addition to improving quality, the software being developed must also have minimal errors and test whether the software is feasible to use or not. This research employed the black box testing method. Black box technical testing was a test of the input or output functionality of the software. The research also described the testing model using automated testing, which was carried out by Apache JMeter tools on performance tests and Katalon Studio to functional tests on the Perbanas portal. The final results of this research depicted the test model from studying business processes, creating test scenarios for automated testing to analyzing the test results. The performance test results aimed to find out how much throughput (transactions per second) and Response Time are. Meanwhile, functional test results aimed to find out whether the expected functions and outputs were appropriate or not. The results of the performance test on the login feature that had been carried out, the best was taken, i.e., sample data that entered approximately 5000 samples for 250 users for a load test per 5 minutes; only 0.06% failed with an average of 15 transactions per second (TPS) by a maximum response time of 68 seconds and a minimum response time of 0.2 seconds. KEYWORDS: Apache JMeter, automation test, black box test, functional test, Katalon Studio, performance test
37
Petrov, Dmitry Yurievich. "The automated system model-controlled design of the sheet glass defects identifying." Vestnik of Astrakhan State Technical University. Series: Management, computer science and informatics 2023, no. 4 (2023): 41–48. http://dx.doi.org/10.24143/2072-9502-2023-4-41-48.
Full textAbstract:
An information model of an automated system for identifying point defects of sheet glass is proposed, imple-mented using Harmony technology and the IBM Rhapsody Modeler software environment, which provides automation of modeling, design and testing of software. For automated detection (localization) and determination of the type (identification) of defects in sheet glass based on the class diagram, modules are implemented that are responsible for the implementation of localization algorithms, identification, interaction with sensors and cameras, archiving, data transmission to the network and data generation for display on the monitor of the operator and technologist. The industrial computer software is implemented in C++ in MS Visual Studio. The application of the Harmony software lifecycle management methodology and the IBM Rhapsody Modeler visual modeling environment has made it possible to increase the efficiency of the development of an automated system for identifying point defects of flat glass. The resulting program model of the automated system simplifies its adaptation to new operating requirements and the connection of additional hardware.
38
Akram, Abdullah, and Nunik Pratiwi. "Pengujian Regresi Otomasi pada Aplikasi Mobile Satudikti Menggunakan Katalon Studio." Jurnal Teknologi Sistem Informasi dan Aplikasi 6, no. 4 (2023): 539–50. http://dx.doi.org/10.32493/jtsi.v6i4.33063.
Full textAbstract:
Satudikti is a one-stop application from the many services available at the Directorate General of Higher Education, to make it easier for users to access various higher education services in one application. Before the application can be widely used, a testing step is indispensable. This is due to potential problems in higher education data that can have a fatal impact, considering that this data is closely related to state information. And if there is an error in the software, the Directorate General of Higher Education must restart the development process that can harm the state. Therefore, the purpose of this study is to test the readiness of the application when it is widely used and reduce the risk of errors to ensure that the application remains of sufficient quality for users, as well as analyze the effectiveness of the application and then whether automated regression testing using Katalon Studio has more value than manual testing. Testing in this study was carried out manually with the black-box testing method and automated testing using Katalon Studio as an automated testing tool. Testing using Katalon Studio found that the functionality, features, and access to the tested pages worked well according to existing requirements. The implementation of automation testing using Katalon Studio has also proven to be more efficient in reducing test time and providing detailed test results to detect errors with easy-to-understand reporting.
39
Medvediev, Dmytro, Valentyna Khotskina, Mykola Khodukin, Svitlana Medvedieva та Illia Prykhodko. "Розробка Android - додатка для керування розумною теплицею на Arduino". Economics and technical engineering 2, № 1 (2024): 79–92. http://dx.doi.org/10.62911/ete.2024.02.01.07.
Full textAbstract:
The relevance of the topic "Development of an Android application for controlling a smart greenhouse on Arduino" is due to the opportunities offered by the field of automated device development, as well as the attention to this field of IT development, both by specialists and users who have certain tasks in production, in business, at home and other areas whose needs can be solved with the help of these technologies. Therefore, the purpose of the research is development of the device, the software for it, and production of a mobile application for controlling the created device. Using the developed device, software and its application, you can create, for example, an automatic greenhouse, which will save time and resources with maximum return. During the study of the automation of the processes of control and management of environmental parameters, the requirements that must be fulfilled during the automation of the receipt and processing of sensor readings were clearly formulated. On the basis of the analysis of the already conducted research works, the main functional components that should be inherent in any automated control system with the possibility of remote control have been selected. In the process of research, the need to use the integrated development environment Arduino IDE and Android Studio is substantiated. Arduino IDE is designed to write, compile, and load programs into Arduino microcontroller memory, and Android Studio is the official Android application development tool based on JetBrains' IntelliJ IDEA software. The process of creating the device is fully described, with a step-by-step review of each element and the sequence of actions. The program code is provided and the principle of operation of all its components is described. The principle of operation of the Android application is also demonstrated. It contains information about the state of the greenhouse (temperature and humidity) and has the ability to turn on cooling both automatically and manually. Information is presented in the form of graphs that change dynamically.
40
Sudip, Chakraborty, and S. Aithal P. "Modbus Data Provider For Automation Researcher Using C#." International Journal of Case Studies in Business, IT, and Education (IJCSBE) 7, no. 3 (2023): 1–7. https://doi.org/10.5281/zenodo.8162680.
Full textAbstract:
<strong>Purpose:</strong> <em>Modbus is a popular protocol for data exchange between devices in industrial automation. It has several advantages over other protocols, like noise immunity, long-distance coverage, and easy integration with the microcontroller's serial module. Sometimes we need a device that provides data for our research work. Here we demonstrate a procedure so researchers can create a virtual Modbus client to get Modbus data for their research work. We created a Modbus client in C# language In Visual Studio. We added a couple of modules, Like the Modbus client, serial module, and message display. We added a couple of graphical user interface elements to control the application. The project code is available on GitHub. The researcher can get and customize according to their needs.</em> <strong>Design/Methodology/Approach</strong>: <em>We created an application in C#. The application has several modules. The main module is the Modbus client. The external device is connected through USB to RS485 converter. When our application starts, the COM object is created. One timer is also started. Its interval is one millisecond. It checks whether the data is reached or not. Once the serial object receives the data, the packet is passed to that Modbus client. The Modbus client starts parsing the received packet. If the packet is OK, then, Extract the command. According to the received command, it created a response packet and added the data of the requested register. Calculate the CRC and add it at the end of the packet. After preparing the packet, send a response back to the master.</em> <strong>Findings/Result: </strong><em>Sometimes, the automation researcher does not have the device to provide the research data. Through this research work, we provide a procedure so the researcher can create a virtual Modbus client to provide the data for their research work. So it can be helpful to the researcher to get the data using their working system. We tested it several times with the baud rate of 9600. It is working perfectly without any issues. Researchers can use it for their research work as a software tool.</em> <strong>Originality/Value: </strong><em>Several software programs are available to provide the data over the Modbus. Sometimes we need to customize the software according to our requirements. Most of the software is not open source, so here we provide an application so that researchers can optimize and customize the code for their research work so it can provide them with some valuable resources.</em> <strong>Paper Type: </strong><em>Experimental-based Research.</em>
41
Neelam, Neelam, and Harish Kumar Sahu. "Library Automation in Government Polytechnic Colleges, Affiliated to CSVTU, Chhattisgarh." Journal of Ravishankar University (PART-A) 31, no. 2 (2025): 56–63. https://doi.org/10.52228/jrua.2025-31-2-6.
Full textAbstract:
The present status and issues of library automation in Chhattisgarh Swami Vivekanand Technical University (CSVTU) affiliated Government Polytechnic Colleges are researched in this study. As library services integrate more and more Information and Communication Technology (ICT), automation becomes a crucial factor to increase efficiency and accessibility. The study assesses levels of automation, utilization of software, skills needed for going digital, and obstacles to professional growth for librarians. Mixed methods were adopted involving structured questionnaires, interviews, and online surveys combined with data analysis done using SPSS. Out of the 39 colleges surveyed, 7.7% are fully automated, 41% partially automated, 30.7% in the initial stage, and 17.9% are non-automated. Koha is the most popular software (52.8%), followed by NewGenLib, SOUL, and Libsys. The key competencies identified are database administration, OCR software, Microsoft Office skills, and navigating online learning. The key challenges for librarians are that they have limited access to training programs, no infrastructure, insufficient time due to workload, and resistance to new technologies.
42
Asaul, A. N., G. F. Shcherbina, and M. A. Asaul. "Marketing automation in the implementation of entrepreneurial activities in the field of real estate turnover using information and communication technologies." Вестник гражданских инженеров 18, no. 6 (2021): 196–204. http://dx.doi.org/10.23968/1999-5571-2021-18-6-196-204.
Full textAbstract:
The article considers the essence of marketing automation in the real estate market and managing the relations with customers by means of software programs, taking into account the trend of shifting the focus of entrepreneurial activity to pre-production and post-production processes. Based on the market analysis, there are described the most successful practical aspects of using information and communication technologies that are considered to be promising for marketing automation, including the best practices of lead generation. There is proposed software for marketing automation that is integrated with other tools. The function of CRM software package integrating with other tools is taken into account, and the most common examples of integration are given. The prospects for the introduction of information and communication technologies in the sphere of real estate turnover are highlighted.
43
Li, Dong Xia, Ai Min Wang, and Peng Hao Ren. "An Error Compensation Method for Rectangular Window Based on NURBS Reconstruction Theory." Materials Science Forum 917 (March 2018): 284–88. http://dx.doi.org/10.4028/www.scientific.net/msf.917.284.
Full textAbstract:
Aiming at the error compensation problem for rectangular window, this paper presents a method of compensation for rectangular window based on NURBS (Non-Uniform Rational B-Splines) reconstruction. In the method, the machining surface is digitally obtained by means of on-machine measurement. The measured data are divided into four regions and different error compensation schemes are used for different regions. The adaptive compensation of the machining error calculated based on NURBS reconstruction theory is achieved by modifying the coordinates of the tool point in the cutter location file. The automation of error calculation and compensation is implemented by software development based on Visual Studio 2012. At the end of the paper, a compensating tool path is emulated in VERICUT. The results show our method is feasible.
44
Marzuki, Khairan, Husain Husain, and Zikriati Apriliana. "Automation of Software Defined Network (SDN) Configuration Management Based on Proxmox with Ansible." International Journal of Electronics and Communications Systems 4, no. 2 (2024): 87. https://doi.org/10.24042/ijecs.v4i2.23821.
Full textAbstract:
Automation of software-defined networking (SDN) in Proxmox VE 8.1 enhances virtual network management by improving efficiency, scalability, and the speed of network configuration changes. This study aims to automate SDN configuration management in Proxmox VE using Ansible and evaluate its performance. The research follows the Network Development Life Cycle (NDLC) method, consisting of six stages: Analysis, Design, Simulation Prototyping, Implementation, Monitoring, and Management. Automation was implemented successfully using an Ansible playbook to manage creating and deleting zones, VNets, subnets, IP gateways, and DHCP ranges. The automated process was tested over three trials, with creation times of 23, 20, and 21 seconds and deletion times of 20, 19, and 20 seconds, respectively. By contrast, the manual process required 6 minutes 6 seconds for creation and 2 minutes 37 seconds for deletion. These results demonstrate that automation using Ansible significantly reduces configuration time, offering a more efficient and reliable approach than manual methods. The findings highlight the potential of Ansible to streamline SDN management in Proxmox VE, saving time, energy, and resources while ensuring scalability and consistency in virtualized network environments.
45
Maulana, Fachri, Aris Sunawar, and Nur Hanifah Yuninda. "Sistem Pemantauan dan Kontrol Waktu pada Studio Musik Menggunakan RFID berbasis Internet of Things (IoT)." Journal of Electrical Vocational Education and Technology 7, no. 1 (2024): 33–54. https://doi.org/10.21009/jevet.0071.04.
Full textAbstract:
Abstrak Penelitian ini bertujuan untuk merancang dan mengimplementasikan sistem pemantauan dan kontrol waktu studio musik berbasis RFID yang terintegrasi dengan IoT. Sistem ini menggabungkan website reservasi online, metode pembayaran Midtrans, REST API, dan Sistem RFID untuk memberikan solusi otomatis dalam pengelolaan waktu, validasi akses pengguna, serta kontrol perangkat elektronik seperti lampu dan stop kontak. Website memungkinkan pengguna untuk melakukan reservasi, top-up saldo poin, dan memilih jadwal sewa dengan transaksi yang aman dan otomatis. Hasil pengujian menggunakan teknik Blackbox Testing menunjukkan bahwa perangkat lunak maupun perangkat keras bekerja sesuai dengan rancangan dan pemrograman awal. Integrasi pembayaran dengan Midtrans memastikan saldo diperbarui secara otomatis tanpa adanya kesalahan manual. Sistem ini memberikan solusi otomatis untuk pengelolaan studio musik dan berpotensi diadaptasi ke aplikasi lain yang membutuhkan reservasi online, pembayaran digital, otomatisasi kontrol, dan manajemen berbasis waktu. Abstract This study aims to design and implement a music studio time monitoring and control system based on RFID integrated with IoT. The system combines an online reservation website, Midtrans payment method, REST API, and RFID to provide an automated solution for time management, user access validation, and electronic device control such as lights and power outlets. The website allows users to make reservations, top up point balances, and select rental schedules with secure and automated transactions. Testing using the Blackbox Testing method shows that both software and hardware function according to the initial design and programming. The integration of Midtrans payments ensures that balances are updated automatically without manual errors. This system provides an automated solution for music studio management and has the potential to be adapted for other applications requiring online reservations, digital payments, automation control, and time-based management.
46
Ms., Pramila Khushali Velip. "Library Automation An Overview." International Journal of Trend in Scientific Research and Development 2, no. 6 (2018): 475–77. https://doi.org/10.31142/ijtsrd18559.
Full textAbstract:
Library automation refers to the use of computer to serve the needs of library users. It is the use of automatic and semi automatic data processing machine to perform such traditional activities such as acquisition, cataloguing, serial control and circulation. It perform various task on electronic machine a considerable human supervision and intervention is needed. Thus this paper traces about what are the objective of library automation, their needs, essential requirements, area of automation, benefits and which are the automation software are available in the market for library automation. Ms. Pramila Khushali Velip "Library Automation: An Overview" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, URL: https://www.ijtsrd.com/papers/ijtsrd18559.pdf
47
Chrisna, I. Dewa Ayu Indira Wulandari, Dana Sulistiyo Kusumo, and Rosa Reska Riskiana. "LOW CODE INTEGRATION TESTING IN OUTSYSTEMS PERSONAL ENVIRONMENT." Jurnal Teknik Informatika (Jutif) 5, no. 2 (2024): 551–60. https://doi.org/10.52436/1.jutif.2024.5.2.1673.
Full textAbstract:
As implied by its name, low code platforms enable software development with minimal or no coding involved. Consequently, ensuring the correctness of the software becomes crucial as developers are unable to directly scrutinize the logic. Furthermore, discussions about the various testing approaches applicable to such applications are relatively scarce. This study aims to conduct integration testing through both white box and black box methods, as well as exploring the types of testing that can be carried out on low code based applications. This research involves several stages, including creating a basic e-shop application and API using OutSystems, test preparation, and test execution. API testing utilizes OutSystems' BDDFramework and Postman automation testing tools, while web page integration is carried out using Katalon Studio. The test results indicate only one of the total 23 test cases was considered failed because the result did not match the expected result. Apart from that, of the four existing levels of testing, component testing can also be carried out on the OutSystems application. However, only with the black box testing method because testing is carried out without accessing the program source code. The comparative execution of API testing (white box) using two distinct testing tools reveals the superior effectiveness of Postman over BDDFramework, offering more comprehensive test outcomes and enhanced test case coverage. In the realm of UI integration testing, Katalon Studio emerges as a fitting tool, benefiting from its record and replay feature that facilitates the definition of test steps.
48
Hartikainen, Eija, and Virpi Hotti. "Evaluation of robotic process automation tasks in large-scale environments: success rates for performance and Z scoring for non-conformity." Journal of Physics: Conference Series 2906, no. 1 (2024): 012024. https://doi.org/10.1088/1742-6596/2906/1/012024.
Full textAbstract:
Abstract Automation software is utilized to enhance efficiency and precision in various industries. Nonetheless, the performance and consistency of these software programs require careful monitoring through measurements. At the Finnish Government Shared Services Centre for Finance and HR (Palkeet), robotic process automation logging systems and experiments have been conducted to evaluate these measures. Success rate calculations are based on the logging system’s information and the findings (100 107 robot runs and 69 657 084 log levels during 2021-2022 and 2023/1-6). Through control charts and Z scoring, the experiments assess the proportion of non-conformity purchase invoices (987253 invoices, and 263822 defectives during 2020-2022) that the software cannot handle due to certain reasons, and the findings support an implementation of the Z scoring to observe out-of-control robot runs and analyze the causes. These results can be used to adapt and control the automation software’s processing capabilities.
49
Strokan, Oksana, and Yulia Lytvyn. "Modern solutions of aerial ion field distributions." Ukrainian Journal of Educational Studies and Information Technology 5, no. 3 (2017): 19–27. http://dx.doi.org/10.32919/uesit.2017.03.02.
Full textAbstract:
The paper considers the simulation of distribution of dispersed aerial ions in space from artificial sources of aerial ionization using the Android Studio software environment. The algorithm for determining and providing optimal aerial ion distribution from artificial aerial ionization sources in space from one or more aerial ionizers is proposed. Ensuring of optimal aerial ion distribution is based on the geometric model of distribution of dispersed aerial ions and is supported by optimal placement of aerial ion radiation sources in a given working area. The peculiarity of the proposed algorithm is the calculation of aerial ion distribution for the combined breathing zone, when a horizontal zone of breathing becomes an inclined one. The proposed algorithm is the basis for software of the automated system for calculating the optimal aerial ion mode of the working environment. The proposed software system is a closed system and performs information, control and auxiliary functions. The software system comprises two modules: a module of input parameters and a modeling module, which allows to simulate the aerial ion distribution in space from artificial sources of aerial ionization. The module of input parameters serves to initialize the input parameters, such as the length and width of the calculated zone, the type, capacity and number of ionizers. The simulator module calculates the aerial ion distribution of one and more sources of aerial ion distribution in a given plane at two modes: at given (fixed) coordinates of the source and in an interactive mode when a user is able to freely adjust (move the screen) the location of the sources. The output block of the results serves to output the calculation results: graphically and numerically, on the screen of the device. The data transfer unit allows to get simulation results of isolines on a plane to be generated as a report and corrected by mail online. The purpose of this work is to develop an algorithm for determining aerial ion distribution on a combined calculated plane for software on the Android Studio basis. The paper presents the algorithm for determining the aerial on distribution in the working zones with a combined breathing zone, which is implemented using the Java programming language in the Android Studio (AS) development environment. The software module is developed in Android Studio for the Android (version 4.2 - 5.0) operating system The developed system is mobile and allows a user to use it at any time from any mobile device with the installed Android version. This advantage of the mobile system is a scientific novelty in this problem area. The system guarantees the automation of the process of aerial ion devices placement effectively, resulting in placement of working places in the most favorable locations for work.
50
Vavilenkova, Anastasiia. "THE ROLE OF SOFTWARE TESTING FOR TEAM DEVELOPMENT." Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies, no. 2(8) (June 15, 2021): 56–61. http://dx.doi.org/10.20998/2413-4295.2021.02.08.
Full textAbstract:
The peculiarities of software product testing processes while working in the Scrum-team were studied. The types of testing characteristic of the flexible testing technique are singled out, that make it possible to make the testing process constantly integrated into teamwork, both at the stage of requirements formation and design, and at the stage of coding and generation of test sets. This is possible by making the tester's recommendations in the process of creating user stories, planning the release of the software version in terms of testing and defects, planning a sprint based on user stories and defects, performing a sprint with continuous testing, regression testing after sprint ends and reporting of results of testing. The article highlights the stages of the flexible testing process in the Scrum team. It is proposed to automate the process of flexible testing for a training team project in the Visual Studio software environment based on Team Foundation Server. Author demonstrates an example of automation of the process of flexible testing by dividing it into four quadrants to comply with the principles of working on a flexible methodology of software development. In the first quadrant there is a study of the quality of the internal code of the software product, the modular testing. To implement modular testing in Visual Studio, a new solution is created in order to generate a class for testing, where the conditions for testing are prescribed in the body of the class. The second quadrant implements the principles of system testing. At this stage the features of creating such a test artifact as test cases are demonstrated. That provides for the fulfillment of certain conditions to verify the functionality of the developing software product; linking between created test cases to user stories presented as team project tasks Product Backlog. The study demonstrates an example of manual testing using a special tool Microsoft Test Manager, which allows you to create plans, add and update test cases, perform manual tests. In the third quadrant, it was performed a trial test in Microsoft Test Manager and it was created another test artifact - error reports. The fourth quadrant automatically tests non-functional software requirements.