Relevant bibliographies by topics / Auxiliary source

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Auxiliary source'

Author: Grafiati
Published: 3 June 2025
Last updated: 23 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Auxiliary source.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Auxiliary source"

1

Li, Yong, Shi Ming Xu, Ren Jie Li, and Shi Feng Cai. "Analysis of the Auxiliary Steam Header’s Source Selection." Advanced Materials Research 608-609 (December 2012): 1266–70. http://dx.doi.org/10.4028/www.scientific.net/amr.608-609.1266.

Full text
Abstract:
Taking the actual production status of a 600MW unit as an example, under different steam flux, it has used the equivalent enthalpy drop theory in this paper to calculate the thermal economic indicators of the auxiliary steam header with different auxiliary steam sources. Moreover, it has conducted a quantitative analysis of the mechanism of the choosing of auxiliary steam source and auxiliary steam source switching’s influence on the thermal economy of unit in this paper.
APA, Harvard, Vancouver, ISO, and other styles
2

Lambert, Gustavo, Fabiana Seidel, Luan Vinícius Fiorio, and Yales Rômulo de Novaes. "INSULATED MODULAR AUXILIARY POWER SOURCE CONCEPT WITH MULTIPLE OUTPUTS." Eletrônica de Potência 24, no. 2 (2019): 139–46. http://dx.doi.org/10.18618/rep.2019.2.0043.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yan, Qiu Hui, and Ning Li. "Comparative Studies on Solar Combisystem by Different Auxiliary Heat Sources." Applied Mechanics and Materials 178-181 (May 2012): 76–79. http://dx.doi.org/10.4028/www.scientific.net/amm.178-181.76.

Full text
Abstract:
This paper proposes a solar combisystem model with biomass boiler as its auxiliary heat source. Taking specific constructions of towns into consideration, solar combisystems with four different auxiliary heat sources——gas boiler, electric boiler, coal boiler and biomass boiler are compared from the aspects of comprehensive energy price, CO2 emissions and social benefits. The results show that, compared with the solar combisystems with conventional energy boilers as their auxiliary heat sources, the system with biomass boiler as its auxiliary heat source has favorable economic, social and environmental benefits.
APA, Harvard, Vancouver, ISO, and other styles
4

Amar, Nissim, Aviv Ziv, Pavel Strajnikov, Alon Kuperman, and Ilan Aharon. "Topological Overview of Auxiliary Source Circuits for Grid-Tied Converters." Machines 11, no. 2 (2023): 171. http://dx.doi.org/10.3390/machines11020171.

Full text
Abstract:
This paper reviews different types of capacitors and auxiliary source circuit topologies and presents an introduction to control strategies used for circuit applications reducing DC-BUS capacitance. The paper argues in favor of replacing bulky electrolytic capacitors in capacitor-supported power electronic systems with auxiliary source circuits. DC-BUS capacitors are widely used in grid-tied power converters (rectifiers) and utilized for power balance, voltage ripple limitation, and short-term energy storage. The electrolyte capacitor is the Achilles heel of any rectifier and power converter due to its higher rate of failure than other circuitry components. Auxiliary source circuits are key components to qualitatively improve the reliability of the DC links, where they divert the instantaneous pulsating power into extra reliable storage components. Unlike previous work, this review serves to provide a clear picture of an auxiliary source circuit design, in favor of optimal solution selection according to the specific application. Therefore, energy storage components (capacitors), topologies, and control strategies of auxiliary source circuits are comprehensively reviewed in this paper. Additionally, detailed explanations, comparisons, and discussions of auxiliary source circuits are offered.
APA, Harvard, Vancouver, ISO, and other styles
5

Iatropoulos, Vissarion G., Minodora-Tatiani Anastasiadou, and Hristos T. Anastassiu. "Electromagnetic Scattering from Surfaces with Curved Wedges Using the Method of Auxiliary Sources (MAS)." Applied Sciences 10, no. 7 (2020): 2309. http://dx.doi.org/10.3390/app10072309.

Full text
Abstract:
The method of auxiliary sources (MAS) is utilized in the analysis of Transverse Magnetic (TM) plane wave scattering from infinite, conducting, or dielectric cylinders, including curved wedges. The latter are defined as intersections of circular arcs. The artificial surface, including the auxiliary sources, is shaped in various patterns to study the effect of its form on the MAS accuracy. In juxtaposition with the standard, conformal shape, several deformations are tested, where the auxiliary sources are forced to approach the tip of the wedge. It is shown that such a procedure significantly improves the accuracy of the numerical results. Comparisons of schemes are presented, and the optimal auxiliary source location is proposed.
APA, Harvard, Vancouver, ISO, and other styles
6

Cekirge, H. "Auxiliary source point method: the Laplace equation." Engineering Analysis with Boundary Elements 4, no. 4 (1987): 186–89. http://dx.doi.org/10.1016/0955-7997(87)90040-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cekirge, H. M., and W. J. Lehr. "Auxiliary source point method: the Laplace equation." Engineering Analysis 4, no. 4 (1987): 186–89. http://dx.doi.org/10.1016/0264-682x(87)90040-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Othman, M. Hussein Anssari. "NINE LEVEL CURRENT SOURCE INVERTER WITH SOLAR PV." International Journal of Engineering Research and Modern Education 1, no. 2 (2016): 51–58. https://doi.org/10.5281/zenodo.61837.

Full text
Abstract:
<em>Multi-level current source using main inverter and auxiliary inductor cell is sufficient to the industrial engines because it generate high power. The present inverter consist of a basic H-bridge current source inverter working as a main inverter generates a multilevel current waveform in joining with two inductor cells connected in parallel as auxiliary circuits. The inductor cells work by generating the intermediate level of the multilevel current waveform with no additional external dc-power sources. This topology is done using Renewable energy by Depending on the solar cell as a dc source. A nine level PWM inverter configuration, with solar PV source will discuss in this paper.</em>
APA, Harvard, Vancouver, ISO, and other styles
9

Kinder, John J. "Auxiliary verbs, dictionaries and the late evolution of the Italian language." Australian Review of Applied Linguistics. Series S 18 (January 1, 2004): 115–32. http://dx.doi.org/10.1075/aralss.18.08kin.

Full text
Abstract:
The use of be as an auxiliary verb with intransitive verbs has declined in all the Romance languages over the past five centuries. Today, Spanish and Portuguese use only have, in Catalan and Romanian be occurs in marginal contexts, and in French, be is used with approximately 40 verbs. Italian is a notable exception, since be is still used as the auxiliary of nearly 300 intransitive verbs, as well as with all transitives in the passive and with all reflexives. This well-known fact is a notorious source of difficulty for language teachers and students, partly because there have been few adequate descriptions or even taxonomies of the semantic classes of intransitive verbs which take be. This paper reports an attempt to describe the selection of auxiliary verbs in Italian in terms of contemporary dictionaries of Italian. The paper offers a description of auxiliary selection based on the Auxiliary Selection Hierarchy proposed by Sorace (2000), using some recent monolingual dictionaries as sources. This raises some issues about the use of dictionaries as source material for grammatical descriptions.
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Xiaoman, and Bo Leng. "Thermal Performance Analysis of Solar Seawater Desalination System Based on Heat Pump Cycle." Journal of Physics: Conference Series 2437, no. 1 (2023): 012005. http://dx.doi.org/10.1088/1742-6596/2437/1/012005.

Full text
Abstract:
Abstract Mathematical model of the solar seawater desalination system based on heat pump cycle was established, which was solved by programming with MATLAB language. The system performance was analyzed by changing four variables, including the initial temperature of water tank, drive hot water temperature drop, the mass concentration of LiBr dilute solution and the system startup temperature. The results show that increasing the initial temperature of water tank is conducive to reducing the heat consumption of the auxiliary heat source and increasing the solar energy supply ratio; Increasing drive hot water temperature drop is beneficial to increase the fresh water production, but the heat of the auxiliary heat source required increases, and the solar energy supply ratio decreases; Increasing the mass concentration of LiBr dilute solution will not change the total heat consumption of the system, the heat consumption of auxiliary heat sources and the solar energy supply ratio, but the fresh water production will decrease; Increasing the system startup temperature will increase the heat consumption of the auxiliary heat source, reduce the solar energy supply ratio, and slightly reduce the fresh water production.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Auxiliary source"

1

Yagow, Eugene R. "Auxiliary Procedures for the AGNPS Model in Urban Fringe Watersheds." Diss., Virginia Tech, 1997. http://hdl.handle.net/10919/30323.

Full text
Abstract:
The Agricultural Nonpoint Source model (AGNPS) is a single-event grid-based model used for simulating runoff, sediment and nutrients from agricultural areas. This study involved using geographic information system (GIS) spatial data and functionality to improve the spatial and temporal assignment of parameter values for the AGNPS 5.0 model and incorporated methods for representing urban fringe land uses and their nonpoint source (NPS) pollution contributions in model inputs. Auxiliary procedures for modeling with AGNPS were developed both for enhancing input into the model and for enhancing modeled output. On an event basis, one procedure automated the creation of complex-formatted AGNPS 5.0 model input files using GIS as a spatial data manager. One pair of alternative procedures were developed to automate the assignment of parameter values on an event basis. One procedure used typical average annual parameter values, and the second assigned parameter values using adaptations of existing time-dependent relationships. On a monthly basis, a sequencing procedure was created to perform multiple runs with the model for a list of storms while updating parameters for each event and aggregating monthly modeled spatial output. Another pair of alternative procedures were developed to facilitate the simulation of monthly output from AGNPS modeled events. The first of these aggregated event output for all storms in each month, while the second supplemented the aggregated output with baseflow and septic system loads. The study area was the 6,500 ha urbanizing Bull Run watershed in northern Virginia, which was modeled as 14,621 cells. Databases were assembled and 109 selected storm events within a 16-year period were modeled using the above procedures. Event data were added together, where necessary, to correspond with observed data from composite-sampled intervals. Output from the two event parameterization procedures were compared with monitored loads calculated for 89 composite periods, while output from the two monthly simulation procedures were compared with monthly monitored data for 23 complete months. The monitored-modeled comparisons were considered inconclusive. Evidence strongly suggested that the rainfall records from a rain gauge outside the watershed did not correspond well with monitored runoff. The average runoff produced with the AGNPS model from the 109 selected storms amounted to 40.7% of rainfall, consistent with the calculated long-term average of 38% for the Bull Run watershed. A nonpoint source pollution index was developed to utilize monthly modeled total nitrogen, total phosphorus, and suspended sediment. Individual rating curves were developed to separately transform loads and concentrations of each pollutant into sub-index values. The maximum sub-index from each parameter was added together and averaged for the index. The index was calculated at the watershed outlet from monitored data, and in a spatially-distributed fashion along all streams from simulated output.<br>Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
2

Madireddy, Madhava Rao. "Analytical design of a parallel hybrid electric powertrain for sports utility vehicles and heavy trucks." Ohio : Ohio University, 2003. http://www.ohiolink.edu/etd/view.cgi?ohiou1175278829.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Santos, Edgar Pereira dos. "CAD/CAM/Usinagem CNC integrado a engenharia reversa /." Ilha Solteira, 2017. http://hdl.handle.net/11449/152068.

Full text
Abstract:
Orientador: Ruis Camargo Tokimatsu<br>Resumo: A sociedade sempre busca inovações como facilitadores de processos para o alcance de objetivos propostos em distintas áreas, utilizando instrumentos, métodos e técnicas diversas. Dentre estas encontra-se a Engenharia Reversa (ER), que é o processo de engenharia afim de se obter um produto ou objeto a partir de um modelo original. Nos últimos anos, com a rápida evolução tecnológica , envolvendo máquinas, ferramentas e softwares, a ER passou a ser um recurso utilizado até mesmo por pequenas e médias empresas. O proposito desta pesquisa é avaliar o desempenho da aplicação de recursos de engenharia, tais como hardwares e softwares de baixo custo ou de uso livre, sobre a ER a fim de obter-se uma peça usinada em uma maquina CNC o mais fiel possível ao modelo físico original. Para isso foram aplicados os conceitos, os processos e recursos necessários nas etapas de reconstrução de um modelo físico , desde a digitalização 3D, utilizando scanners tridimensionais, o tratamento do objeto capturado, a reconstrução do modelo no software CAD até a geração do código G, por meio de softwares CAM, a ser enviado a uma máquina CNC para realização da usinagem e obtenção da peça modelo. Foi utilizado o scanner 3d manual Ciclop, cuja digitalização resultou em dimensões muitas próximas ao objeto original. Também foram utilizados os softwares Meshlab para tratamento do modelo digitalizado e o AutoCad Fusion 3D para criação do modelo CAD e geração dos processos de usinagem e código G, escolhidos devid... (Resumo completo, clicar acesso eletrônico abaixo)<br>Mestre
APA, Harvard, Vancouver, ISO, and other styles
4

Brigatti, Junior Luiz Antonio. "A utilização de tecnologias digitais Open Source: uma contribuição ao estudo comparativo de ambientes virtuais na PUC-SP." Pontifícia Universidade Católica de São Paulo, 2010. https://tede2.pucsp.br/handle/handle/18257.

Full text
Abstract:
Made available in DSpace on 2016-04-29T14:23:53Z (GMT). No. of bitstreams: 1 Luiz Antonio Brigatti Junior.pdf: 7632702 bytes, checksum: bd6dce7cbff42707a6a96428a8b3966b (MD5) Previous issue date: 2010-03-19<br>Methods that allow the observation of users of virtual learning environments acting in the work place tend to become increasingly more necessary when the number of computer users and the inherent complexity of systems grow. Processes of continuous assessment carried out during the life cycle of Virtual Learning Environments (VLEs) seem to be required condition for users to reach good results. This research used information provided by professors to verify their usage process, and compare the use of the open source tools and the difficulties found in the virtual environments Moodle and TelEduc , both in use at PUC-SP. Thus, this dissertation argues that approaches in which VLEs are used by the faculty members of the School of Economics, Administration, Accounting and Actuary (FEA at PUC-SP) represent tools of effective gain in quality<br>À medida que cresce o número de usuários de computadores e a inerente complexidade dos sistemas, métodos para observar usuários de ambientes de aprendizagem virtuais em seu local de trabalho tendem a ser cada vez mais necessários. Processos de avaliação contínua, a serem executados durante o ciclo de vida dos ambientes virtuais de aprendizagem (AVAs), se apresentam como condição necessária a um bom resultado para seus usuários. Esta pesquisa buscou averiguar com usuários docentes o processo da utilização, além de comparar o uso das ferramentas open source e as dificuldades encontradas nos ambientes virtuais Moodle e Teleduc na PUC-SP. Assim, nessa dissertação argumenta-se que abordagens com a utilização de AVAs pelo corpo docente da Faculdade de Economia, Administração, Contabilidade e Atuária (FEA-PUC-SP), representam uma ferramenta de efetivo ganho de qualidade
APA, Harvard, Vancouver, ISO, and other styles
5

Bordignon, Andrei. "Controladores auxiliares de frequência para o restabelecimento de microrredes ilhadas com alto nível de inserção de geração eólica." Universidade Tecnológica Federal do Paraná, 2017. http://repositorio.utfpr.edu.br/jspui/handle/1/2339.

Full text
Abstract:
CAPES<br>A difusão da geração distribuída e das microrredes, bem como a crescente expansão do uso de energias renováveis, como a eólica, trazem desafios e oportunidades relacionados à operação e controle de sistemas elétricos. Em sistemas sujeitos à operação ilhada, a capacidade de restabelecimento é fundamental para que o suprimento de energia seja retomado após a ocorrência de um desligamento. Esta tarefa pode ser de difícil execução, uma vez que desbalanços de potência significativos podem ocorrer, decorrentes da energização da rede e de variações na disponibilidade de energia primária. Neste contexto, o presente trabalho propõe a adoção de estratégias operacionais e de controle que possibilitem a execução do processo de restabelecimento em microrredes híbridas eólico-diesel com alto nível de inserção de geração eólica, sem a adoção de sistemas de armazenamento de energia. A proposta é baseada em duas malhas de controle suplementares para uma unidade eólica de conversor pleno, que habilita a unidade eólica para contribuir com a regulação de frequência durante o restabelecimento da microrrede. Os dois controladores propostos são excitados pelo erro de frequência do sistema e atuam somente quando as cargas do sistema são energizadas. Um dos controladores suplementares tem o objetivo de extrair energia cinética da turbina eólica, através da atuação na referência de velocidade da turbina nas malhas de controle do conversor do lado do gerador. O segundo controlador suplementar é projetado para extrair temporariamente energia elétrica armazenada no barramento CC da unidade eólica, por meio de um deslocamento temporário da referência de tensão do barramento CC nas malhas de controle do conversor do lado da rede. A energia extraída da turbina eólica e do barramento CC é transmitida ao sistema para mitigar o desbalanço de potência causado por um incremento de carga. Assim, as estratégias de controle propostas previnem afundamentos excessivos de frequência durante o restabelecimento de sistemas com baixa inércia. Para o projeto dos controladores propostos, uma técnica de otimização baseada em algoritmos genéticos foi utilizada. O desempenho do sistema é comparado em dois diferentes modos de operação, gerador diesel operando em modo Vf e unidade eólica operando em modo Vf. Resultados obtidos por meio de simulações não lineares no domínio do tempo demostram a efetividade das estratégias propostas.<br>The diffusion of distributed generation and microgrids, as well as the growing expansion of renewable energy, like wind power, bring challenges and opportunities related to the operation and control of electrical power systems. In systems exposed to islanded operation, the black start capability is fundamental to restore the energy supply after the occurrence of a blackout. The black start is usually a difficult operational event, since significant power unbalances may occur in the system. The present work proposes operational and control strategies that make possible the black start of wind-diesel microgrids with high penetration level of wind generation, without the adoption of energy storage systems. The proposed control approach is based on two supplementary control loops for a fully rated converter wind turbine, which enable the wind unit to contribute to the frequency regulation during the black start of a stand-alone system. Both the proposed controllers employ the system frequency error as input signal and act only when the system loads are energized. One of the supplementary controllers seeks to extract kinetic energy from the wind turbine, by modifying the speed reference of the wind turbine in the typical control loop of the rotor-side converter. The second supplementary controller is designed to temporarily extract electrical energy from the DC-link capacitor, by acting in the reference of the DC-link voltage in the typical control loop of the grid-side converter. The energy extracted from the wind turbine and DC-link capacitor is injected into the grid to mitigate the power unbalance caused by the load energization. Thus, the proposed control strategies prevent excessive frequency drops during the load energization of low inertia stand-alone systems in restoration procedures. The design of the proposed controllers was performed by a genetic algorithm optimization technique. The performance of the system is compared in two different operation modes, diesel generator operating in Vf control mode and wind generation unit operating in Vf control mode. Results obtained by nonlinear time domain simulations demonstrate the effectiveness of the proposed control approach.
APA, Harvard, Vancouver, ISO, and other styles
6

Georgiou, Andriani. "The cult of Flavia Iulia Helena in Byzantium : an analysis of authority and perception through the study of textual and visual sources from the fourth to the fifteenth century." Thesis, University of Birmingham, 2013. http://etheses.bham.ac.uk//id/eprint/4175/.

Full text
Abstract:
The symbolic role of Helena throughout the Byzantine period has never been considered in any detail. Many of the literary sources, particularly historiographical and hagiological texts, are not easily accessible and have not been translated. The visual sources referring to Helena, such as works of late Roman and Byzantine art, coinage, illustrated manuscripts, reliquaries, and wall paintings, have never been collected. My thesis collects and re-evaluates the textual and visual evidence from the fourth to the fifteenth century in order to explore the origins and development of Helena's cult; the emergence of a Helena-legend with symbolic and metaphorical functions; and the ways that the Byzantines reconstructed, judged, and appreciated her role. Special attention is given to the relationship between word and image, as well as the influence exerted on them by contemporary political and social developments. This thesis demonstrates that memories of Helena as an empress and as a saint were manufactured in several distinct stages over several centuries; and that her role differed in the eastern and western halves of the former Roman empire. The evidence is analysed thematically and in chronological order.
APA, Harvard, Vancouver, ISO, and other styles
7

Abreu, Sergio Brasil. "Comportamento de filtros rápidos de camada profunda no tratamento de águas de abastecimento mediante o emprego de polímeros como auxiliares de filtração." Universidade de São Paulo, 2009. http://www.teses.usp.br/teses/disponiveis/3/3147/tde-09092009-141154/.

Full text
Abstract:
O projeto consistiu em avaliar o emprego de polímeros catiônicos e aniônicos de diferentes pesos moleculares como auxiliares de filtração no tratamento de águas de abastecimento proveniente de mananciais com alto grau de eutrofização com vistas a possibilitar a otimização da remoção de material particulado e minimização da evolução da perda de carga. O aparato experimental é composto, principalmente, por 4 filtros em escala piloto de alta taxa do tipo camada profunda e fluxo descendente por gravidade operados em paralelo. Os filtros possuem 5 m de altura e diâmetro interno de 150 mm. O procedimento experimental foi dividido em três etapas, execução de ensaios de fluidificação e expansão do leito dos filtros e utilização de polímeros catiônicos e de polímero aniônico como auxiliares de filtração. A primeira etapa teve como objetivo definir parâmetros de dimensionamento do sistema de lavagem em contra-corrente com ar e água e nas duas etapas seguintes foram realizados os ensaios de filtração a uma taxa de 500 m³/m²/dia, com a utilização dos polímeros com três dosagens diferentes. Os polímeros utilizados foram CA-2577, CA-2581, CD-2592 e N1986. Estes possuem estrutura e pesos moleculares variáveis, de forma que o trabalho tivesse uma maior amplitude. Os valores médios de turbidez, para a primeira etapa dos ensaios de filtração, foram de 2,36 ± 0,28 UNT e 1,12 ± 0,21 UNT para água bruta e decantada, respectivamente, 0,26 ± 0,07 UNT para o filtro F1 com antracito, 0,25 ± 0,08 UNT para o filtro F3 com antracito e adição de polímero, 0,29 ± 0,08 UNT para o filtro F2 com areia e 0,26 ± 0,08 UNT para o filtro F4 com areia e adição de polímero. Para a segunda etapa dos ensaios de filtração os valores médios de turbidez foram de 2,03 ± 0,36 UNT para água bruta, 0,80 ± 0,21 UNT para água decantada, 0,09 ± 0,03 UNT para o filtro F1, sem adição de polímero, e 0,15 ± 0,04, 0,16 ± 0,03 e 0,10 ± 0,04 UNT para os filtros F2, F3 e F4, respectivamente, todos com adição de polímero. Os resultados experimentais possibilitaram concluir que a adoção do antracito como material filtrante do tipo camada única e profunda apresenta a vantagem de permitir uma menor velocidade ascensional de água de lavagem para uma determinada expansão quando comparado a um filtro de areia de idêntica granulometria. A aplicação dos polímeros catiônicos e do polímero aniônico como auxiliares de filtração não proporcionou para nenhuma dosagem utilizada melhora significativa no comportamento dos filtros. Uma eventual melhora ou piora foi insignificante e estava ligada à qualidade da água decantada. No que diz respeito à perda de carga, os filtros com antracito tiveram carreiras de filtração mais longas quando comparados com os de areia, independente da utilização dos polímeros.<br>The project was to evaluate the use of anionic and cationic polymers of different molecular weights as filter aids to treat drinking water treatment of surface water sources with high degree of eutrophication, particularly with regard to particulate matter removal optimization and head loss rate minimization. The experimental apparatus was composed of four pilot scale, deep bed, down flow rapid gravity filters, operated in parallel. The filter columns were 5 m high, had inner diameter of 150 mm. The experimental procedure was divided in three stages, conduction of media fluidization and media expansion tests and cationic and anionic polymers application as filter aid. The first stage aims was to define design parameters for the filter backwashing system with water and air and in the two next phases the tests were conducted at a filtration rate of 500 m³/m²/day, with the use of polymers with three different dosages. The polymers tested were CA- 2577, CA-2581, CD-2592 and N1986. They have different structure and molecular weights, thus making wider the array of possibilities tested. The average values of turbidity, for the first stage of testing filtration, were 2.36 ± 0.28 and 1.12 ± 0.21 NTU for raw and settled water, respectively, 0.26 ± 0.07 NTU to the filter F1 with anthracite, 0.25 ± 0.08 NTU for the filter F3 with anthracite and addition of polymer, 0.29 ± 0.08 NTU for the filter F2 with sand and 0.26 ± 0.08 NTU for the filter F4 with sand and the addition of polymer. For the second stage of testing of the filter values of turbidity were 2.03 ± 0.36 NTU for raw water, 0.80 ± 0.21 NTU for settled water, 0.09 ± 0.03 for the filter F1, without the addition of polymer, and 0.15 ± 0.04, 0.16 ± 0.03 and 0.10 ± 0.04 NTU for filters F2, F3 and F4, respectively, all with the addition of polymer. The experimental results led us to conclusion that the adoption of anthracite as single media in deep bed filtration presents the advantage of a lower ascent backwash water velocity for any given bed expansion as compared to deep bed filtration through sand with the same granulometric characteristic. Application of cationic and anionic polymers as filter aids did not lead to any significant improvement in the behavior of pilot scale filters, regardless of applied polymer dosage. Any eventual improvement or worsening was not significant and was closely related to the settled water quality. Regarding the head loss, the filters with anthracite had longer filtration careers when compared to sand, regardless the use of polymers.
APA, Harvard, Vancouver, ISO, and other styles
8

Drápalíková, Jitka. "Návrh podnikového trainee programu a jeho zavedení pomocí technik projektového managementu v organizaci." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2021. http://www.nusl.cz/ntk/nusl-444615.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

DELLA-VALLE, VERONIQUE. "1) etude moleculaire et physiopathologique des virus mcf isoles de proliferations malignes induites chez la souris par le virus auxiliaire de la leucemie de friend (f-mul v) : 2) les autoanticorps : un outil essentiel de la biologie cellulaire." Paris 6, 1988. http://www.theses.fr/1988PA066675.

Full text
Abstract:
La leucemogenese induite chez la souris par le virus auxiliaire de la leucemie de friend est accompagnee de la formation "in vivo" de retrovirus mcf dans les proliferations malignes de lignees erythroides et lymphoides mais pas dans celles des lignees de type myelomonocytaire. L'identification des virus mcf isoles montre que leur genome viral comporte une region "eno" recombinee avec des sequences endogenes murins. In vivo ces virus f-mcf entrainent l'apparition d'erythroblastoses et de lymphoblastoses
APA, Harvard, Vancouver, ISO, and other styles
10

Cantarell, Elena. "La vida en un poble de la Catalunya interior, segles XIV-XVI. Localització, recuperació, organització i explotació dels fons documentals de Cubells." Doctoral thesis, Universitat de Barcelona, 2013. http://hdl.handle.net/10803/123616.

Full text
Abstract:
Aquesta tesi doctoral està bastida a partir d’un fons documental inèdit, dispers i malmès, que calia salvaguardar. Això ha permès estudiar el territori des del territori i amb les fonts del territori. I, a més, contribuir a la conscienciació de la conveniència de la preservació dels documents històrics amb la recuperació de l'arxiu municipal de Cubells de manera que aquestes actuacions es poguessin adaptar a altres realitats arxivístiques. Aquesta tesi té un triple vessant: per una banda, recuperar un arxiu municipal i posar-lo a l’abast dels estudiosos, en segon lloc fer una recerca històrica a partir d’aquesta documentació i, finalment, aconseguir presentar la documentació històrica com un material didàctic idoni per a la docència universitària i també, per què no, d’altres nivells educatius i així mateix fer-la assequible per a la difusió. Estructura: Capítol 1: descriu la situació en què es trobava la documentació, la cronologia, la llengua, les tipologies documentals i la tradició dels documents de l'arxiu. Capítol 2: descriu amb tot detalli les actuacions dutes a terme per localitzar, recuperar, organitzar i difondre els fons d'aquest arxiu, mostrant detalladament tota la metodologia de treball utilitzada. Inclou catàleg de pergamins. Capítol 3: descriu l'organització i producció de les institucions productores dels documents: el municipi de Cubells, l'escrivania local i els senyors de la terra. Capítol 4: analitza en profunditat els censals morts. Aquesta és la tipologia més freqüent de la documentació estudiada i també la que mostra la situació real dels homes i dones que poblaven aquestes terres als segles baix medievals. Els apèndixs inclouen: transcripció de documents significatius. Un petit apartat sobre l'important tresor artístic, actualment dispers, d'aquest petit lloc. Índex de topònims i índex d'antropònims.<br>Structure: Chapter 1: It describes in which situation the documents were found, their chronology, their languages, the documentary typologies and the tradition of the documents of this archive. Chapter 2: It describes entirely the performances carried out to locate, recover, arrange and diffusion the documentations, showing in detail all the methodology of work used. It includes the catalogue of parchments. Chapter 3: It describes the study of the institutions that produced the documents: the municipality of Cubells, the local scrivener and the landowners. + Chapter 4: It analyses in depth a documentary typology called “censals morts”, a credit document. This is the most frequent typology it can be found among the documentation studied and also the one who shows the real situation of the men and women who lived in Cubells during the Late Middle Ages. The appendices include: transcription of significant documents; a small study of the important artistic treasure of this small village, nowadays disperse; and Indexes of toponyms and antroponyms.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Auxiliary source"

1

Corvisier, Jean-Nicolas. Sources et méthodes en histoire ancienne. Presses universitaires de France, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Shevcov, Vyacheslav. Auxiliary historical disciplines: historical Metrology of Russia. INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1048877.

Full text
Abstract:
The textbook sets out the basics of historical Metrology, presents the historiography of the discipline, and describes its sources, methods, and research approaches. The features of the formation and development of the main Russian measures and their application are considered in the General context of the economic and cultural history of the Russian state and society, the development of scientific and technical knowledge. The appendices contain the program of lectures on historical Metrology, control questions on the course, topics of possible abstracts, a list of sources, textbooks and literature, the main Russian dometric measures of length, area, volume and weight. For students of historical faculties of higher educational institutions.
APA, Harvard, Vancouver, ISO, and other styles
3

McDonnell Douglas Astronautics Company--Houston Division. and United States. National Aeronautics and Space Administration., eds. Independent Orbiter assessment: Analyis of the auxiliary power unit. McDonnell Douglas Astronautics Company, Houston Division, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Office, General Accounting. Space exploration: Power sources for deep space probes : report to the Honorable Barbara Boxer, U.S. Senate. The Office, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Marykhuba, Igorʹ. Moskovskie arkhivnye dokumenty ob Abkhazii XX veka. [OOO "Alasharbaga"], 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

M, Medushevskai︠a︡ O., Rumi︠a︡nt︠s︡eva M. F, Rossiĭskiĭ gosudarstvennyĭ gumanitarnyĭ universitet. Istoriko-arkhivnyĭ institut. Kafedra istochnikovedenii︠a︡ i vspomogatelʹnykh istoricheskikh dist︠s︡iplin. та Vspomogatelʹnye istoricheskie dist︠s︡ipliny (Conference), ред. Vspomogatelʹnye istoricheskie dist︠s︡ipliny--istochnikovedenie--metodologii︠a︡ istorii v sisteme gumanitarnogo znanii︠a︡: Materialy XX mezhdunarodnoĭ nauchnoĭ konferent︠s︡ii, Moskva, 31 i︠a︡nvari︠a︡-2 fevrali︠a︡ 2008 g. Rossiĭskiĭ gos. gumanitarnyĭ universitet, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Artur, Górak, and Skupieński Krzysztof, eds. Formuła, archetyp, konwencja w źródle historycznym: Materiały IX Sympozjum Nauk Dających Poznawać Źródła Historyczne, Kazimierz Dolny, 14-15 grudnia 2000 r. Radzyńskie Stowarzyszenie Inicjatyw Lokalnych, Instytut Badawczy "Libra", 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kremlʹ", Gosudarstvennyĭ muzeĭ-zapovednik "Rostovskiĭ, and Rossiĭskiĭ gosudarstvennyĭ arkhiv drevnikh aktov, eds. Pist︠s︡ovye materialy Rostovskogo uezda XVII veka. Drevlekhranilishche, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Vspomogatelʹnye i spet︠s︡ialʹnye nauki istorii v XX-nachale XXI v.--prizvanie, tvorchestvo, obshchestvennoe sluzhenie istorika (Conference) (26th 2014 Moscow, Russia). Vspomogatelʹnye i spet︠s︡ialʹnye nauki istorii v XX-nachale XXI v.--prizvanie, tvorchestvo, obshchestvennoe sluzhenie istorika: Materialy XXVI Mezhdunarodnoĭ konferent︠s︡ii, Moskva, 14-15 apreli︠a︡ 2014 g. Rossiĭskiĭ gosudarstvennyĭ gumanitarnyĭ universitet, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ṭāliʻ, ʻAbd al-Raḥmām. Istorii︠a︡ Abulfeĭz-khana. Institut istorii narodov Sredneĭ Azii imeni Makhpirat, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Auxiliary source"

1

Dijk, V. A. P., E. A. Alsema, R. A. W. Albers, T. Degner, H. Gabler, and E. Wiemken. "Autonomous Photovoltaic System with Auxiliary Source for Batterycharging." In Tenth E.C. Photovoltaic Solar Energy Conference. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3622-8_187.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yadav, Kanchan, and Birendra Kr. Saraswat. "Auxiliary source optimisation for charging systems in electric vehicle." In Sustainability in Digital Transformation Era: Driving Innovative & Growth. CRC Press, 2024. http://dx.doi.org/10.1201/9781003534136-61.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dong, Xin, Tanay Kumar Saha, Ke Zhang, Joel Tetreault, Alejandro Jaimes, and Gerard de Melo. "Temporal Event Reasoning Using Multi-source Auxiliary Learning Objectives." In Lecture Notes in Computer Science. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-99739-7_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Guo, Yunqi, Yang Yu, Yonggang Huang, and Zhaoyang Zhou. "The Output Waveform Control Methods of Auxiliary Voltage Source Inverter." In Proceedings of the 2015 International Conference on Electrical and Information Technologies for Rail Transportation. Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-49367-0_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, Benfeng, Xiaohua He, Hang Lin, Guojiang Shen, and Xiangjie Kong. "An Epidemic Trend Prediction Model with Multi-source Auxiliary Data." In Lecture Notes in Computer Science. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-7244-5_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Dubey, Tanmay, Anurag Kumar, and Vijaya Bhadauria. "Highly Linear Source-Degenerated OTA with Floating Gate Auxiliary Differential Pair." In Lecture Notes in Electrical Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9775-3_64.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Jun, Xiangyu Chen, Chengjun Jing, and Hao Liang. "Energy Efficiency Analysis of Hybrid Heat Pump System-Based Air Source Auxiliary Ground Source in Chengdu Plain." In Environmental Science and Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-13-9528-4_23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yadav, Kanchan, and Sanjay Kumar Maurya. "Modelling and Control of Power Flow from Auxiliary Source in Hybrid Electric Vehicle." In Recent Advances in Power Electronics and Drives. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8586-9_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dubey, Tanmay, Ravi Shankar, and Vijaya Bhadauria. "Cross-Coupled Bulk-Degenerated OTA Using Source Follower Auxiliary Pair to Improve Linearity." In Lecture Notes in Electrical Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9775-3_63.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, Junfeng, Christopher T. Symons, and Ranga Raju Vatsavai. "CoMAC: Conversational Agent for Multi-source Auxiliary Context with Sparse and Symmetric Latent Interactions." In Lecture Notes in Computer Science. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-8186-0_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Auxiliary source"

1

Quercia, Alessio, Erenus Yildiz, Zhuo Cao, et al. "Enhancing Monocular Depth Estimation with Multi-Source Auxiliary Tasks." In 2025 IEEE/CVF Winter Conference on Applications of Computer Vision (WACV). IEEE, 2025. https://doi.org/10.1109/wacv61041.2025.00627.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jianshe, Liu, Zhu Guangping, and Yin Jingwei. "Optimized Auxiliary Classifier Generative Adversarial Network Model for Underwater Acoustic Source Ranging." In 2024 OES China Ocean Acoustics (COA). IEEE, 2024. http://dx.doi.org/10.1109/coa58979.2024.10723465.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhou, Yusong, Xinmin Zhang, Xiaoyu Jiang, and Zhihuan Song. "TCPP: A Benchmark Platform for Traffic Congestion Prediction with Multi-Source Auxiliary Data." In 2024 China Automation Congress (CAC). IEEE, 2024. https://doi.org/10.1109/cac63892.2024.10864649.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hui, Bai-Zheng, and Jie-Qing Xin. "Analysis of Trading Opportunities for Source-Load-Storage Resources in the Main-Auxiliary Markets." In 2024 The 9th International Conference on Power and Renewable Energy (ICPRE). IEEE, 2024. https://doi.org/10.1109/icpre62586.2024.10768307.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tan, Xiao, Hui Xiao, Zhenyu Xu, Can Zhou, Jianing Liu, and Wenbin Sun. "Auxiliary Service Market Mechanism of Primary Frequency Response Reserve Provided by Source-load Coordination." In 2024 4th International Conference on New Energy and Power Engineering (ICNEPE). IEEE, 2024. https://doi.org/10.1109/icnepe64067.2024.10860390.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Huang, Jia-Yan, Cheng-Chi Hsiao, Ming-Yang Hung, and Shih-Hsiang Hsu. "LiDAR Chip-based Ranging and Velocity through Timing Jitter Correction." In Optical Fiber Communication Conference. Optica Publishing Group, 2025. https://doi.org/10.1364/ofc.2025.m3j.3.

Full text
Abstract:
Through low-dispersion silica-based auxiliary interferometry with 1.6-meter optical-path difference, 12.5-times shorter than the measured distance, a silicon-based LiDAR is demonstrated for the 20-meter ranging and 200-mm/s velocity, limited to swept-source linewidth, through optical-clock Hilbert-transform resampling.
APA, Harvard, Vancouver, ISO, and other styles
7

Siddique, Marif Daula, Mehdi Seyedmahmoudian, Saad Mekhilef, and Alex Stojcevski. "Development of Fault-Tolerant Versions of a Three-Source Multilevel Inverter Topology for Optimal Performance with Reduced Number of Auxiliary Switches." In 2024 IEEE 34th Australasian Universities Power Engineering Conference (AUPEC). IEEE, 2024. https://doi.org/10.1109/aupec62273.2024.10807546.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zaridze, R., V. Tabatadze, I. Petoev, D. Kakulia, and T. Tchabukiani. "Emission source localization using the method of auxiliary sources." In 2016 International Symposium on Electromagnetic Compatibility - EMC EUROPE. IEEE, 2016. http://dx.doi.org/10.1109/emceurope.2016.7739167.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Liao, Xuejun, Ya Xue, and Lawrence Carin. "Logistic regression with an auxiliary data source." In the 22nd international conference. ACM Press, 2005. http://dx.doi.org/10.1145/1102351.1102415.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bradshaw, Stephen, Colm O’Riordan, and Riad Cheikh. "Social Media as an Auxiliary News Source." In 12th International Conference on Knowledge Discovery and Information Retrieval. SCITEPRESS - Science and Technology Publications, 2020. http://dx.doi.org/10.5220/0010144202710275.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Auxiliary source"

1

Poerner. PR-015-11211-R01 Mechanical Seal Auxiliary Systems Guideline. Pipeline Research Council International, Inc. (PRCI), 2013. http://dx.doi.org/10.55274/r0010789.

Full text
Abstract:
The reliance on centrifugal pumps the world over implies a heavy reliance on mechanical seals. In order to get the highest level of performance from the seals, auxiliary systems are used either to condition the seal operating environment or monitor the systems and detect failures. Current standards already exist that recommend seal auxiliary systems based on certain pump operating conditions, and are widely accepted in the industry both among seal end-users and vendors. And because of their knowledge on the actual seals, the vendors are the primary source for end-users to receive designs and equipment for the auxiliary systems. All of these systems will rely on a number of components that will be selected based on the seals, the operating conditions, and the requirements of the end-user�s facility. Therefore, accurate details for the range of operating conditions of the pump and the product must be supplied to the vendors; that way the vendors can properly specify the seal and the required auxiliary systems. For example, if the product is expected to have considerable contaminants, a filter/separator may be recommended to prevent the contaminants from depositing on the seal faces. If the product will be considerably high in temperature, the recommendation may be to include a cooler to reduce heat build-up in the seals. However, regardless of how well the seal environment is conditioned, it is still expected that the seals will fail. When this failure does occur, additional components may also be selected that will attempt to reduce the amount of product released. These leak detection components are also considered auxiliary system for the seal. Monitoring components can also be used to detect and possibly predict when this failure might occur, thereby, possibly avoiding the unplanned failure altogether. In the future use of seal auxiliary systems, it is this monitoring and trending of operating data that is becoming more critical. Much of the required technology to perform this trending is already in existence; but it is only slowly being adopted, with some possible advances in technology adding to the accuracy and reliability of the trended predictions and detections.
APA, Harvard, Vancouver, ISO, and other styles
2

Jebrail, F. F., and R. S. Kistler. L51753 Natural Draft Aerial Coolers. Pipeline Research Council International, Inc. (PRCI), 1996. http://dx.doi.org/10.55274/r0010422.

Full text
Abstract:
In recent years, environmental regulations have tightened and community involvement in environmental issues has increased. The pipeline industry has responded by attempting to reduce the negative economic and environmental impact of conventional air-cooled heat exchangers, which are characterized by high noise levels, excessive energy consumption, and high maintenance costs. While industry has had limited success in reducing air cooler noise using silencers and timed variable-speed fans, these solutions are costly. The most effective noise reduction method is to reduce or eliminate noise at its source. The primary goals of this investigation were to address key technical issues and to document natural draft aerial cooler (NDAC) design knowledge. The following objectives were identified: - Form a project team from PRCI-recommended aerial cooler manufacturers to design a quiet aerial cooler - Conduct technical and economic analyses to determine the actual operating needs and constraints of NDACs - Conduct market analyses to evaluate and identify the marketing issues associated with NDACs - Document the results of the project in a final report In recent years, the number of environmental permits mandating the use of natural draft aerial coolers to reduce noise has increased. Natural draft aerial cooler technology can potentially eliminate noise and improve operational energy efficiency. A broad group of applications could benefit from this technology, including natural gas, engine jacket water, auxiliary water, and engine lube oil cooling. With noise regulations and penalties becoming increasingly stringent, natural draft heat transfer technology is becoming more important. No organization has as yet fully investigated it. The technical and economic feasibility of NDACs were investigated for natural gas, engine jacket water, auxiliary water, and lube oil cooler applications.
APA, Harvard, Vancouver, ISO, and other styles
3

Warrick, Arthur, Uri Shani, Dani Or, and Muluneh Yitayew. In situ Evaluation of Unsaturated Hydraulic Properties Using Subsurface Points. United States Department of Agriculture, 1999. http://dx.doi.org/10.32747/1999.7570566.bard.

Full text
Abstract:
The primary information for accurately predicting water and solute movement and their impact on water quality is the characterization of soil hydraulic properties. This project was designed to develop methods for rapid and reliable estimates of unsaturated hydraulic properties of the soil. Particularly, in situ methodology is put forth, based on subsurface point sources. Devices were designed to allow introduction of water in subsurface settings at constant negative heads. The ability to operate at a negative head allows a direct method of finding unsaturated soil properties and a mechanism for eliminating extremely rapid preferential flow from the slow matrix flow. The project included field, laboratory and modeling components. By coupling the measurements and the modeling together, a wider range of designs can be examined, while at the same time realistic performance is assured. The developed methodology greatly expands the possibilities for evaluating hydraulic properties in place, especially for measurements in undisturbed soil within plant rooting zones. The objectives of the project were (i) To develop methods for obtaining rapid and reliable estimates of unsaturated hydraulic properties in situ, based on water distribution from subsurface point sources. These can be operated with a constant flow or at a constant head; (ii) To develop methods for distinguishing between matrix and preferential flow using cavities/permeameters under tension; (iii) To evaluate auxiliary measurements such as soil water content or tensions near the operating cavities to improve reliability of results; and (iv: To develop numerical and analytical models for obtaining soil hydraulic properties based on measurements from buried-cavity sources and the auxiliary measurements. The project began in July 1995 and was terminated in November 1998. All of the objectives were pursued. Three new subsurface point sources were designed and tested and two old types were also used. Two of the three new designs used a nylon cloth membrane (30 mm) arranged in a cylindrical geometry and operating at a negative water pressure (tension). A separate bladder arrangement allowed inflation under a positive pressure to maintain contact between the membrane and the soil cavity. The third new design used porous stainless steel (0.5 and 5 mm) arranged in six segments, each with its own water inlet, assembled to form a cylindrical supply surface when inflated in a borehole. The "old" types included an "off-the-shelf" porous cup as well as measurements from a subsurface drip emitter in a small subsurface cavity. Reasonable measurements were made with all systems. Sustained use of the cloth membrane devices were difficult because of leaks and plugging problems. All of the devices require careful consideration to assure contact with the soil system. Steady flow was established which simplified the analysis (except for the drip emitter which used a transient analysis).
APA, Harvard, Vancouver, ISO, and other styles
4

Pickett, S. L., and S. L. Morton. Health and Safety Plan for Operations Performed for the Environmental Restoration Program: Task, Characterization of Potential Waste Sources at Auxiliary Reactor Area-1 Operable Unit 5--07 site ARA-02. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/7117630.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pickett, S. L., and S. L. Morton. Health and Safety Plan for Operations Performed for the Environmental Restoration Program: Task, Characterization of Potential Waste Sources at Auxiliary Reactor Area-1 Operable Unit 5--07 site ARA-02. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10164253.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Auxiliary source' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography