Log in

Relevant bibliographies by topics / Baked loaves

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Baked loaves'

Author: Grafiati

Published: 4 June 2021

Last updated: 13 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Baked loaves.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Baked loaves"

1

Gavurníková, Soňa, Michaela Havrlentová, Ľubomír Mendel, Iveta Čičová, Magdaléna Bieliková, and Ján Kraic. "Parameters of Wheat Flour, Dough, and Bread Fortified by Buckwheat and Millet Flours." Agriculture (Polnohospodárstvo) 57, no. 4 (2011): 144–53. http://dx.doi.org/10.2478/v10207-011-0015-y.

Full text

Abstract:

Parameters of Wheat Flour, Dough, and Bread Fortified by Buckwheat and Millet FloursThe composite flours were created from basic wheat flour and from buckwheat and millet flours used as additives in the weight ratio of 5-30%. Basic technological parameters of flours (ash content, wet gluten, gluten swelling, sedimentation index, falling number), rheological properties of dough, and sensory parameters of baked bread loaves (weight, specific volume, aroma, taste, structure) were studied. Additives influenced all traits of flours, doughs, and baked breads. From the technological and sensory points of view, baked breads with the addition of buckwheat were accepted up to the addition of 20% and breads with millet up to 5% (even though taste and flavour were accepted up to 15% addition).

APA, Harvard, Vancouver, ISO, and other styles

2

Saunders, J. A., Kurt A. Rosentrater, and P. G. Krishnan. "Analysis of Corn Distillers Dried Grains With Solubles (DDGS) / Flour Mixtures, and Subsequent Bread Baking Trials." Journal of Food Research 3, no. 3 (2014): 78. http://dx.doi.org/10.5539/jfr.v3n3p78.

Full text

Abstract:

<p>Grains offer a variety of nutrients; it is thought that through the addition of distillers dried grains with solubles (DDGS) the fiber and protein in baked products may be improved. In this study, all-purpose flour and bread flour were tested with various DDGS substitution levels (0%, 25%, or 50% flour substitution) with the dough conditioner sodium stearoyl lactylate (SSL) (0%, 0.15%, or 0.3% flour weight basis). SSL is surfactant produced from reacting stearic acid with food grade lactic acid in the presence of sodium. Overall, as the substitution level of DDGS increased, so did protein, moisture, ash, and Hunter-a values. Peak height, side height, width, and length of baked loaves decreased as DDGS quantity increased, however. Baked bread containing SSL had enhanced quality, with increasing dough strength, rate of hydration, mixing tolerance, crumb strength, loaf volume, and shelf life. Overall, 25-50% DDGS substitution appeared to have a negative effect on physical features despite the fact that the nutrient content was enhanced. Less than 25% DDGS had minimal negative effects on bread properties.</p>

APA, Harvard, Vancouver, ISO, and other styles

3

Bojňanská, T., H. Frančáková, P. Chlebo, and A. Vollmannová. "Rutin Content in Buckwheat Enriched Bread and Influence of its Consumption on Plasma Total Antioxidant Status." Czech Journal of Food Sciences 27, Special Issue 1 (2009): S236—S240. http://dx.doi.org/10.17221/967-cjfs.

Full text

Abstract:

The goal of this study is the evaluation of enriched bread prepared with an addition of buckwheat as a source of biologically active components in nutrition. Experimental pastry was baked using buckwheat wholegrain flour blended with wheat flour in different portions (10%, 20%, 30%, 40% and 50%) in order to observe the influence of buckwheat addition on dough processing and the quality of the final baked products. Taking into account the overall acceptability rating, it was concluded that bread with an addition of up to 30% of buckwheat could be baked with satisfactory evaluation results. The content of rutin in loaves in a consumable form prepared with a buckwheat addition varied between 7.76 mg/kg and 26.90 mg/kg. The clinical study which followed the baking experiment was based on the consumption of enriched bread (30% buckwheat, between 34.7 mg/kg and 38.2 mg/kg rutin content in dry matter) by a group of volunteers during a period of four weeks. The results approved the increase of the total antioxidant status thanks to the buckwheat enriched bread consumption from the value of 1.135 ± 0.066 mmol/dm<sup>3</sup> at the beginning of the study to 1.46 ± 0.083 mmol/dm<sup>3</sup> at the end of the study, i.e. significant differences.

APA, Harvard, Vancouver, ISO, and other styles

4

Awoyale, Wasiu, Adebayo Abass, and Bussie Maziya-Dixon. "Retention of pro-vitamin A carotenoid in composite bread baked with high quality cassava flour from yellow-fleshed cassava root." Functional Foods in Health and Disease 8, no. 9 (2018): 438. http://dx.doi.org/10.31989/ffhd.v8i9.534.

Full text

Abstract:

Background: As one of the most widely consumed foods, bread is one of the most important agricultural products. Bread made from high-quality cassava flour is consumed in some parts of Sub-Sahara Africa (SSA). The bread has no pro-vitamin S carotenoids (pVAC) due to the use of artificial colorants. Consequently, there is a need for the use of pVAC rich foods for bread production. Foods that are rich with pro-vitamin A carotenoids can be converted into retinol in the human body and whose bioconversion contributes to the reduction of vitamin A deficiency diseases (VAD). VAD has caused annual loss of life in SSA, especially in Nigeria. The yellow-fleshed cassava root might contribute to the reduction of this disease. The high quality yellow cassava flour (YHQCF) produced from yellow-fleshed cassava root may contribute to the pVAC composition of bread. As a result, there is a need for the evaluation of the retention of pVAC in composite bread baked with high quality cassava flour from yellow-fleshed cassava roots. Methods: The YHQCF was produced from TMS01/1368 cassava variety. The bread loaves consisted of 20% and 100% YHQCF and were produced by mixing the sugar, margarine, yeast, improver, and salt with the composite flour and YHQCF respectively, after which water was added and mixed to get the homogenous dough. The dough was proofed for 2.5 hours, kneaded, cut into shape, placed in a lubricated baking pan, and baked at 200oC for 30 min. Analyses of the pro-vitamin A (cis and trans-β carotene) and dry matter content were carried out on all the samples, including samples from the YHQCF production steps using standard methods. The samples from the YHQCF production steps were chosen and analyzed for pVAC in order to check the levels of degradation of the pVAC from the raw cassava root to using the root for flour production and the quantity of pVAC retained when 100% of the YHQCF is used for bread production compared to 20% composite. The β-carotene nutrient retention of the bread was also calculated.Results: The results demonstrated how the total pVAC content of the raw yellow-fleshed cassava root was 16.83 µg/g dry basis with 29% dry matter (DM) content. Subsequent processing by peeling, washing, grating, and dewatering into granules (56% DM) caused 48% reduction in the pVAC content which was reduced to 40% after drying and milling the dried grits into YHQCF (97% DM). Preparation of recipe for bread demonstrated how the 20% composite flour dough (61% DM) contained 0.29 µg/g db pVAC representing 1.72% retention, which was later reduced to 0.25 µg/g db pVAC or 1.49% retention after baking (62%DM). On the other hand, bread loaves baked from 100% YHQCF (67% DM) retained 0.74 µg/g db pVAC representing 4.40% of the 16.83 µg/g db pVAC in the starting raw material. Conclusions: The bread produced from 100% YHQCF may contribute to the pro-vitamin A status of bread consumers in SSA more than the 20% YHQCF composite. However, both bread samples are low in pVAC. In order to attain the required retinol equivalent level after bioconversion in the human body, consumption of other foods rich in vitamin A would be required to attain the required retinol equivalent level after bioconversion in the human body but can be enhanced if consumed with other foods rich in vitamin A.Keywords: High quality cassava flour; composite flour; Bread; Pro-vitamin A carotenoid; Nutrition

APA, Harvard, Vancouver, ISO, and other styles

5

Belcar, Justyna, Anna Sobczyk, Tomasz R. Sekutowski, Sławomir Stankowski, and Józef Gorzelany. "Evaluation of Flours from Ancient Varieties of Wheat (Einkorn, Emmer, Spelt) used in Production of Bread." Acta Universitatis Cibiniensis. Series E: Food Technology 25, no. 1 (2021): 53–66. http://dx.doi.org/10.2478/aucft-2021-0005.

Full text

Abstract:

Abstract The study investigates rheological properties of dough and baking process made from flour obtained by milling grains from ancient varieties of wheat (einkorn, emmer and spelt), compared to common wheat flour dough (Arkadia variety). The findings show that einkorn flour dough and emmer flour dough present poor tolerance to mechanical processing and prolonged fermentation. These types of dough should be mixed through relatively short, and fermentation time should not exceed 80 minutes for einkorn dough and 45 minutes in the case of emmer dough. In the case of spelt flour dough, the optimum duration of mechanical processing and fermentation amounted to 10 minutes and 60 minutes, respectively. In terms of technological and baking parameters, spelt flour was most similar to the flour obtained by milling conventional wheat, and the superiority of the former was in fact identified in the case of selected factors. A one-stage method was used in the baking process and the bread was then subjected to organoleptic and physicochemical assessments and to texture profile analysis (TPA). Measurements were also performed to determine the indicators reflecting the quality of the baking processes, including dough yield, baking loss and bread yield. The physical parameters of the bread produced were significantly related to the wheat variety. The loaves made from einkorn and spelt flour were of good quality, comparable to the bread made from the conventional wheat, while their baking quality indicators were satisfying. Bread dough made from emmer flour did not meet the required parameters mainly related to the organoleptic assessment and selected physical properties of the bread crumb. However, the one-stage production method should not be applied to doughs made from emmer flour. Given the specific characteristics of the breads produced from the ancient wheat varieties, including their pleasant taste and aroma, as well as attractive colour in the case of einkorn bread, these baked products may be an interesting addition to the assortment of breads on offer from bakeries, restaurants and agritourist farms.

APA, Harvard, Vancouver, ISO, and other styles

6

Suhasini. K, Suhasini K., Jagadeesh S. Sanganal, Phani A. R. Phani A.R, et al. "Synthesis, Characterisation of Azathioprine Loaded Chitosan based Nanoparticles." Global Journal For Research Analysis 3, no. 7 (2012): 245–47. http://dx.doi.org/10.15373/22778160/july2014/87.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Gao, De Zhong, Gan Wei Cai, Hui Shi, and Yu Chen Pan. "Adjacency Matrix Based Analysis on a Novel Metamorphic Manual Operation Sugarcane Loader." Applied Mechanics and Materials 397-400 (September 2013): 1529–33. http://dx.doi.org/10.4028/www.scientific.net/amm.397-400.1529.

Full text

Abstract:

Sugarcane loader is a kind of agricultural machinery for sugarcane transport. Traditional sugarcane loaders are mostly hydraulic type powered by diesel engine, which is difficult to promote in small producing unit, because of its big size and high maintenance costs. A manual operation sugarcane loader with metamorphic function invented by the research of metamorphic mechanism applied to sugarcane loaders can change its topological structures according to different needs of work tasks. The grabbing and raising task of sugarcane can be done by a single operator action. This paper introduces the source-metamorphic mechanism of the sugarcane loader, as well as the metamorphic ways. Use the adjacency matrix to describe the topology changes of different work tasks and to analysis the principles and characteristics of configuration.

APA, Harvard, Vancouver, ISO, and other styles

8

Zhang, Shuanghong, Lei Yu, and Guohua Song. "Emissions Characteristics for Heavy-Duty Diesel Trucks Under Different Loads Based on Vehicle-Specific Power." Transportation Research Record: Journal of the Transportation Research Board 2627, no. 1 (2017): 77–85. http://dx.doi.org/10.3141/2627-09.

Full text

Abstract:

Both operating modes and emissions factors for heavy-duty diesel (HDD) trucks were analyzed under different loads to understand the effect of vehicle loads on emissions. Second-by-second speed data for different loads for HDD trucks were collected first. Then a method for calculating the vehicle-specific power (VSP) values and an emissions model for heavy-duty vehicles by using the VSP value were developed to evaluate the effect of different vehicle loads. The VSP distributions and emissions characteristics for fully loaded and unloaded trucks were analyzed and compared. The results illustrate that the fully loaded vehicles spent more time driving in steady modes and the time percentage of VSP values in the bin of 0 kW/ton for fully loaded trucks was lower than the percentage for unloaded trucks. However, the time percentage at the positive VSP value was significantly higher than the percentage for the unloaded trucks. The emissions factors of fully loaded trucks were significantly higher than those of unloaded trucks. Emissions factors were affected the most at speed intervals of 20 to 40 km/h, with emissions factors for carbon dioxide, carbon monoxide (CO), oxides of nitrogen (NOx), hydrocarbon, and particulate matter (PM) at 20.4%, 23.5%, 29.0%, 11.7%, and 9.4% higher, respectively, than those levels for unloaded vehicles. With an increase of travel speed, the impact of the load on emissions weakened. Vehicle loads had the greatest effect on emissions of NOx, followed by emissions of CO. PM emissions were the least affected by vehicle loads. The impact of vehicle loads on emissions was affected by different acceleration behaviors under different loads.

APA, Harvard, Vancouver, ISO, and other styles

9

Onikiienko, Serhii, Mykhailo Dyba, and Iuliia Gernego. "Econometric modelling of bank activities: value-based approach to the problem loans terms’ rescheduling." SHS Web of Conferences 107 (2021): 09002. http://dx.doi.org/10.1051/shsconf/202110709002.

Full text

Abstract:

The permanent state of the financial crisis has predictably brought to the forefront such traditional problem of banking as problem loans. This research aims to work out an econometric approach to the solution of the problem of loans terms’ rescheduling. For this purpose, we, firstly, treated credit as a bank’s investment project with cashflows’ chart including initial outflow (principal) and following inflows represented by loan payments. Secondly, we combined the schematic representation of loan’s cashflows with NPV formula accustomed to loan’s cashflows and it allowed to create the econometric models for three types of loan: classic, annuity, serial. Thirdly, for the case when borrower breaks a loan’s payment schedule and it leads to the reduction of loan’s NPV and loss of the wealth of bank’s shareholders, respectively, we outlined special compensative models of cashflows where default in payment is interpreted by the lender as an additional forced loan. We suggested modifying the loan terms (interest rate or effective period of the loan agreement) for the rest of payment periods. Fourthly, we laid the special compensative models of forced loans’ cashflows a top corresponded initial cashflows of loans and this has made it possible to get formulas calculating the modified interest rate and the additional number of loans’ payment periods with the aid of backward calculation. As a result, we developed the econometric models of the loan terms’ modifications based on the prolongation of the initial credit period and the increasing of the initial interest rate.

APA, Harvard, Vancouver, ISO, and other styles

10

Ma, Wenxing, Yubo Zhang, Chunbao Liu, and Songlin Wang. "Prediction Method of the Fuel Consumption of Wheel Loaders in the V-Type Loading Cycle." Mathematical Problems in Engineering 2015 (2015): 1–12. http://dx.doi.org/10.1155/2015/538176.

Full text

Abstract:

Wheel loaders in the V-type loading cycle are characterized by complicated loading conditions, nonlinear power-train system, and time-variable engine power distribution. Therefore, it is difficult to predict the fuel consumption of wheel loaders in the V-type loading cycle. The static matching methods cannot provide fuel consumption prediction for the loading cycle. In this paper, the prediction method and model of the fuel consumption for wheel loaders in the V-type loading cycle were proposed. Firstly, the hydraulic system data were tested when a wheel loader loaded three different materials in a typical V-type loading cycle. Secondly, the tested data were filtered by the 8th-order Butterworth filter and the dimensionless power deduction equations of hydraulic power system for loading three different materials were obtained by Gaussian and linear fitting based on the filtered data in the loading cycle. Finally, fuel consumption was obtained with the compiling dynamic calculation program as well as input parameters of tested vehicle speed, throttle parameter, and the dimensionless equation. The simulation results agreed well with experiment results. Dynamic calculation program is applicable to calculate loading economy and can provide academic guidance for wheel loader’s design and optimization.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Baked loaves"

1

Erlebach, Christopher B. "Bubble heterogeneities in bread, caused by sheeting." Thesis, University of Cambridge, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.246474.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lai, Kwok-leung. "Mortgage securitization : prepayment analysis of mortgage-backed securities /." Hong Kong : University of Hong Kong, 2000. http://sunzi.lib.hku.hk/hkuto/record.jsp?B25939993.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Korula, Febin. "The Credit Risk in Stock-Based Loans." Master's thesis, University of Cape Town, 2018. http://hdl.handle.net/11427/29380.

Full text

Abstract:

Stock-based loans are an increasingly popular form of loan that are collateralised using stocks. Since these loans are often non-recourse loans, the lenders are subject to the risk that the collateral is worth less than the loan, and the borrower defaults. This dissertation will consider the credit risk faced by lenders when issuing these loans. To achieve this, this dissertation will propose different models to quantify this risk using various credit measures. A sensitivity analysis to key model parameters is then conducted. Some brief comments about capital requirements will also be made.

APA, Harvard, Vancouver, ISO, and other styles

4

Zabri, Siti Normi. "Study of thin resistively loaded FSS based microwave absorbers." Thesis, Queen's University Belfast, 2015. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.676498.

Full text

Abstract:

The purpose of this study was to develop new FSS based microwave absorber designs to minimise the physical thickness, increase the bandwidth and provide radar backscatter suppression that is independent of the wave polarization at large incident angles. A new low cost, accurate and rapid printing technique is employed to pattern the periodic arrays with the precise surface resistance required for each of the FSS elements to optimize the performance of this class of absorber. The electromagnetic behaviour of five new FSS based structures, two standalone arrays, and three absorber arrangements, have been studied using CST Microwave Studio software. The FSS structures consist of two closely spaced arrays of rings with the conductor split at one or two locations to provide independent control of the resonances. By careful design these are shown to exhibit coincident spectral transmission responses in the TE and TM plane. Based on this design methodology, a very thin 4-layer metal backed resistively loaded rectangular loop FSS absorber which works from 0° - 22.5° is shown to give a wide band performance that is independent of the orientation of the impinging signals. To reduce the manufacturing complexity, a single layer FSS absorber which operates at 45° incidence has been designed to give a polarisation independent performance by employing an array of rectangular split loops with discrete pairs of resistive elements of unequal value inserted at the midpoint of the four sides. A major increase in bandwidth is obtained from a single layer FSS absorber which is composed of an array of nested hexagonal loops. Moreover the use of the same surface resistance for all four elements in the unit cell is shown to significantly simplify the construction of the structure which was designed to provide radar cloaking from 0° to 45° incidence. A new manufacturing strategy is presented, where the required surface resistances are obtained by employing an ink-jet printer to simultaneously pattern the FSS elements on the substrate and digitally control the dot density of the nano silver ink and aqueous vehicle mixture.

APA, Harvard, Vancouver, ISO, and other styles

5

黎國樑 and Kwok-leung Lai. "Mortgage securitization: prepayment analysis of mortgage-backed securities." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2000. http://hub.hku.hk/bib/B31256879.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ghosh, Sudip. "Risk based capital requirements and the U.S. loan market." Morgantown, W. Va. : [West Virginia University Libraries], 1999. http://etd.wvu.edu/templates/showETD.cfm?recnum=853.

Full text

Abstract:

Thesis (Ph. D.)--West Virginia University, 1999.<br>Title from document title page. Document formatted into pages; contains vi, 175 p. : ill. Includes abstract. Includes bibliographical references (p. 173-175).

APA, Harvard, Vancouver, ISO, and other styles

7

Samuelsson, Ted. "Load Unit Geometry Optimization for Heavy Duty Machinery." Thesis, Umeå universitet, Institutionen för fysik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-108618.

Full text

Abstract:

The construction equipment industry is developing at a fast pace, increasing the expectation on the next-generation machines. Wheel loaders and backhoe loaders are part of this evolution and all subsystems in those machines need to be developed to meet the high demands in energy eciency and productivity. One of the most important parts of the wheel loader is the loading unit. This is traditionally designed using highly experienced engineers and CAD software. To simplify the early stages of this process was an optimization tool developed to generate a design outlay. The optimization will minimize the mass of the linkage since unnecessary weight will lower the eciency. The minimum can be found by moving the joints and adjusting the shape of the device. The optimization will also include constraints to assure the correct performance of the linkage. Since there are a high number of design variables, a gradient-based optimization method was used. A finite element solver was also implemented to calculate the forces and stresses in the linkage. The linkages studied in this report are one from a typical wheel loader and one from a backhoe loader. Since these machines are extremely versatile, and used formany diferent tasks, two sets of constraints are compiled. One of the constraint sets yields a linkage suitable for machines only equipped with bucket, while the other results in an all-round linkage suitable for most tools and applications. The optimized linkages are compared to existing devices. The results show that there are some improvements possible and that the software could be used to help designers. However, the optimization problem is hard to solve due to non-smooth constraints functions and numerical instabilities. This issue could be overcome by diferent means, like using automatic diferentiation, a non-gradient based optimization method, decreasing the number of constraints or decreasing the number of design variables.<br>Utvecklingen av anlaggningsmaskiner sker i snabb takt och detta ökar förväntningarna på framtidens maskiner. En stor andel av alla anläggningsmaskiner är hjullastare och traktorgrävare och alla delsystem på dessa maskiner måste följa med i utvecklingen. En av de viktigaste delarna pa en hjullastare ar lastaggregatet. Det designas traditionellt med hjälp av CAD mjukvara och mycket erfarna konstruktörer. För att underlätta denna process har en optimeringsrutin utvecklats, som generarar ett designförslag. Optimeringen minskar länkagets massa genom att fytta lagringspositioner och ändra delarnas dimensioner. Detta ökar efektiviteten hos maskinen eftersom den slipper köra runt på onödig vikt. Optimeringen innehåller även villkor för att säkerställa god prestanda hos det optimerade aggregatet. Eftersom det ingår väldigt många designvariabler i optimeringen används en gradientbaserad metod. En finita element approximation används for att beräkna krafter och spänningar i länkaget. De länkage som undersöks i detta projekt är ett typsikt hjullastaraggregat och ett typiskt traktorgrävaraggregat. Eftersom dessa maskiner ar väldigt mångsidiga sammanställdes två olika uppsättningar av villkor. Den ena uppsättningen används för att optimera ett aggregat som endast ska användas med skopa, medan den andra uppsättningen används för att ta fram ett mer mångsidigt aggregat avsätt for att kunna klara av de flesta situationer och verktyg. De optimerade lastaggregaten är jämförda med produktionsaggregat och det visar sig att vissa förbättringar är möjliga. Slutsattsen är att optimeringsrutinen kan bli ett bra hjälpmedel for konstruktörer men att den behöver lite mer veriering. Villkorsfunktionen som optimeringen måste lösa är inte helt slät vilket är ett problem för en gradientbaserade metod och dessutom finns vissa numeriska instabiliteter. Dessa svårigheter kan undkommas pa olika sätt, t.ex. genom att använda automatisk derivering,byta optimeringsalgoritm, minska antalet villkor eller minska antalet variabler.

APA, Harvard, Vancouver, ISO, and other styles

8

Jaoui, Abdelhak. "Can the Baker plan work?" Virtual Press, 1987. http://liblink.bsu.edu/uhtbin/catkey/490119.

Full text

Abstract:

The purpose of this study was to analyze, using a medium term scenario of three years, the impact 9f the Baker Plan on the economies of fifteen debt laden countries. A central argument of this scenario was to assess whether growth and creditworthiness would be restored in these countries. A model using projections of debt service, imports, exports and capital requirements was developed to test these variables. Baker's package of $29 billion over three years (1985-1988) was contrasted with the model projections. The findings showed that, in the short-term, Baker's proposal will fall short of restoring growth and creditworthiness. However, the supply side policies suggested by Baker Initiative are the right way to go if the indebted countries are to resume growth and creditworthiness in the long run.

APA, Harvard, Vancouver, ISO, and other styles

9

Hong, Won-Jong. "Direct Decomposition of NO over Ba-loaded Ce-based Mixed Oxide Catalysts." 京都大学 (Kyoto University), 2011. http://hdl.handle.net/2433/142237.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Gentles, Jeremy A. "Monitoring Training Loads with a Web Based Athlete Monitoring System." Digital Commons @ East Tennessee State University, 2011. https://dc.etsu.edu/etsu-works/3988.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Baked loaves"

1

Petersen, Andrew V. Commercial mortgage loans and CMBS: Developments in the European market. 2nd ed. Sweet & Maxwell, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Clarke, Peter S. Complete guide to asset-based lending: With checklists and forms. Prentice-Hall, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Clarke, Peter S. Asset-based lending: The complete guide to originating, evaluating, and managing asset-based loans, leasing, and factoring. Irwin Professional Pub., 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

S, Clarke Peter, ed. Asset-based lending: The complete guide to originating, evaluating, and managing asset-based loans, leasing, and factoring. Irwin Professional Pub, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Institute, Pennsylvania Bar. Building the capital stack for commercial real estate in 2012 and beyond. Pennsylvania Bar Institute, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Subprime mortgage market turmoil: Examining the role of securitization : hearing before the Subcommittee on Securities and Insurance and Investment of the Committee on Banking, Housing, and Urban Affairs, United States Senate, One Hundred Tenth Congress, first session, on how subprime mortgages are securitized, the effect of recent increases in defaults and delinquencies on the subprime securitization market for both borrowers and investors, and how credit risk for mortgage-backed securities is determined and how the assigned ratings are monitored, Tuesday, April 17, 2007. U.S. G.P.O., 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Spotgeste, Milton R. Securitization of subprime mortgages. Nova Science Publishers, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Accounts receivable and inventory lending: How to establish and operate an asset-based lending department. 3rd ed. Bankers Pub. Co., 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Institute, Pennsylvania Bar. High-yield real estate debt structures: Structuring and allocating subordinate and pari-passu debt in securitized loan transactions. Pennsylvania Bar Institute, 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

K, Kokula Krishna Hari, ed. Hybrid Energy System fed ANFIS based SEPIC Converter for DC/AC Loads. Association of Scientists, Developers and Faculties, 2016.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Baked loaves"

1

Rao, J. S. "Axially Loaded 1-D Structures." In Simulation Based Engineering in Solid Mechanics. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-47614-8_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Oh, Byung H., and Petr Kabele. "Durability under Chemical Loads." In Durability of Strain-Hardening Fibre-Reinforced Cement-Based Composites (SHCC). Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-94-007-0338-4_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Toledo Filho, Romildo D., Eduardo M. R. Fairbairn, and Volker Slowik. "Durability under Thermal Loads." In Durability of Strain-Hardening Fibre-Reinforced Cement-Based Composites (SHCC). Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-94-007-0338-4_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Wittmann, Folker H. "Durability under Combined Loads." In Durability of Strain-Hardening Fibre-Reinforced Cement-Based Composites (SHCC). Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-94-007-0338-4_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Chakraborty, Subrata, Atin Roy, Shyamal Ghosh, and Swarup Ghosh. "Metamodeling-Based Reliability Analysis of Structures Under Stochastic Dynamic Loads with Special Emphasis to Earthquake." In Risk Based Technologies. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-5796-1_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Rios S., Fredy H., Lukas König, and Hartmut Schmeck. "Stigmergy-Based Scheduling of Flexible Loads." In Applications of Evolutionary Computation. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-31204-0_31.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Łagoda, T., and E. Macha. "Energy-Based Approach to Damage Cumulation in Random Fatigue." In Reliability Assessment of Cyclically Loaded Engineering Structures. Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5556-4_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Geiser, Linda H., Sarah E. Jovan, Douglas A. Glavich, and Mark E. Fenn. "Predicting Lichen-based Critical Loads for Nitrogen Deposition in Temperate Forests." In Nitrogen Deposition, Critical Loads and Biodiversity. Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-007-7939-6_33.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Geyer, Hartmut, and Uluc Saranli. "Gait Based on the Spring-Loaded Inverted Pendulum." In Humanoid Robotics: A Reference. Springer Netherlands, 2018. http://dx.doi.org/10.1007/978-94-007-6046-2_43.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Miądlicki, Karol, and Mateusz Saków. "LiDAR Based System for Tracking Loader Crane Operator." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-18715-6_34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Baked loaves"

1

Samudin, N., W. N. Mohd Isa, T. H. Maul, and W. K. Lai. "Analysis of Gait Features between Loaded and Normal Gait." In Internet-Based Systems (SITIS 2009). IEEE, 2009. http://dx.doi.org/10.1109/sitis.2009.37.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Beecher, Scott F., and Bret G. Lynch. "Loading Software to Engine Controls in the Field." In ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/97-gt-016.

Full text

Abstract:

With the advent of electronically alterable memories in electronic gas turbine engine control systems, there is now the opportunity for updating software in the field. Field loading provides a means to economically correct problems or introduce enhancements to system operation through the electronic control. In this paper we describe the characteristics of high integrity reprogramming systems used to update engine controls in-the-field. Pratt & Whitney Aircraft supports two methods for in-service reprogramming of Electronic Engine Controls (EECs), These two methods are PC Laptop based loaders and ARINC loaders. This discussion will focus on the capabilities provided to support in-the-field reprogramming of engine controls. The flexibility, integrity, and the benefits of field reprogramming provided by these software loading systems will be explained. These reprogramming systems provide a PC based application and ARINC based systems for either on-wing reprogramming or on-board reprogramming directly from a flight deck device to the EEC. The PC Loader reprogramming utilities allow field personnel to reprogram engine control application software and/or constants and configuration information using a suitably equipped IBM PC or compatible computer. These utilities are intended to be operated per Service Bulletin authorization only. They require a PC compatible computer (presumably a laptop model) with 2 UART interface cards, an interfacing cable, and the new software to be loaded. The rigor and manner of the integrity checks to ensure proper loading of the control is essential to an acceptable loading system. There are two types of ARINC-based loaders: on-wing loaders and on-board loaders. Both types enable the operator to upload application, trim, and/or configuration software to the engine control. Additionally the ARINC 615 device allows operators to download fault and configuration data from the control. Each type of loader uses a specially formatted file to control the sequence of operations involved in a data loading session. The on-wing loader utilizes a specially designed portable data loader which connects directly to the EEC via dedicated cabling through the control’s ARINC connectors. This type of data loader contains software which communicates via an ARINC 615 protocol to a peer software entity running on the EEC. The on-board loader uses the aircraft’s central maintenance computer system to communicate with the EEC over the aircraft’s ARINC 629 data bus. It also operates using a peer-to-peer communication protocol with the EEC. The ARINC 629 loader requires no extra equipment or cabling, nor does it require the EEC to be accessible for attachment of cables.

APA, Harvard, Vancouver, ISO, and other styles

3

Zhang, Fangrui, and Chengqing Wu. "Numerical simulation of UHPC filled tube columns against blast loads." In International Conference on Performance-based and Life-cycle Structural Engineering. School of Civil Engineering, The University of Queensland, 2015. http://dx.doi.org/10.14264/uql.2016.1093.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zeneli, Glediana, and Arsen Benga. "FINDING THE EFFECTIVE FRONTIER FOR A PORTFOLIO OF RISK LOANS (ALBANIAN CASE)." In 4th International Scientific Conference: Knowledge based sustainable economic development. Association of Economists and Managers of the Balkans, Belgrade, Serbia et all, 2018. http://dx.doi.org/10.31410/eraz.2018.137.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zhang, Nan, Jijun Ma, Jian Chen, and Tianzhou Chen. "SPM-Based Boot Loader." In 2008 International Conference on Embedded Software and Systems Symposia (ICESS Symposia). IEEE, 2008. http://dx.doi.org/10.1109/icess.symposia.2008.82.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Patrou, Maria, Kenneth B. Kent, and Michael Dawson. "Scaling Parallelism Under CPU - Intensive Loads in Node.js." In 2019 27th Euromicro International Conference on Parallel, Distributed and Network-Based Processing (PDP). IEEE, 2019. http://dx.doi.org/10.1109/empdp.2019.8671573.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Javad, Taherinezhad, Priyan Mendis, Tuan Ngo, and Massoud Sofi. "Behaviour of pre-stressed high strength concrete sleepers subjected to dynamic loads." In International Conference on Performance-based and Life-cycle Structural Engineering. School of Civil Engineering, The University of Queensland, 2015. http://dx.doi.org/10.14264/uql.2016.942.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Komeil Hashemi, S., Mark A. Bradford, and Hamid R. Valipour. "The performance of a cable-stayed bridge pylon under close-range blast loads." In International Conference on Performance-based and Life-cycle Structural Engineering. School of Civil Engineering, The University of Queensland, 2015. http://dx.doi.org/10.14264/uql.2016.697.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Hao, Hong, and Yifei Hao. "Performance of spiral-shaped steel fibre reinforced concrete structure under static and dynamic loads." In International Conference on Performance-based and Life-cycle Structural Engineering. School of Civil Engineering, The University of Queensland, 2015. http://dx.doi.org/10.14264/uql.2016.1186.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Prasad, M. Hari, G. Rami Reddy, A. Srividya, and A. K. Verma. "Time variant reliability analysis under random loads." In 2010 2nd International Conference on Reliability, Safety and Hazard - Risk-Based Technologies and Physics-of-Failure Methods (ICRESH). IEEE, 2010. http://dx.doi.org/10.1109/icresh.2010.5779574.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Baked loaves"

1

Balmer, M. L., and B. C. Bunker. Waste forms based on Cs-loaded silicotitanates. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/86952.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Cowles, Christian C., Richard T. Kouzes, and Edward R. Siciliano. Simulations of Lithium-Based Neutron Coincidence Counter for Gd-Loaded Fuel. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1169377.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Band, Hamid, Srikumar Raja, and Tatiana Bronich. Mechanism-Based Enhanced Delivery of Drug-Loaded Targeted Nanoparticles for Breast Cancer Therapy. Defense Technical Information Center, 2013. http://dx.doi.org/10.21236/ada577110.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Band, Hamid, and Tatiana Bronich. Mechanism-Based Enhanced Delivery of Drug-Loaded Targeted Nanoparticles for Breast Cancer Therapy. Defense Technical Information Center, 2014. http://dx.doi.org/10.21236/ada599969.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Bronich, Tatiana, and Hamid Band. Mechanism-Based Enhanced Delivery of Drug-Loaded Targeted Nanoparticles for Breast Cancer Therapy. Defense Technical Information Center, 2014. http://dx.doi.org/10.21236/ada600027.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Bronich, Tatiana, Hamid Band, and Srikumar Raja. Mechanism-Based Enhanced Delivery of Drug-Loaded Targeted Nanoparticles for Breast Cancer Therapy. Defense Technical Information Center, 2013. http://dx.doi.org/10.21236/ada580965.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Miller, JD, and RG Pratt. Estimates of Refrigerator Loads in Public Housing Based on Metered Consumption Data. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/1112.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Miller, J. D., and R. G. Pratt. Estimates of Refrigerator Loads in Public Housing Based on Metered Consumption Data - ERRATA. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/2888.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Schechter, E., Emil Simiu, and M. M. Schechter. Developmental computer-based version of ASCE 7-95 standard provisions for wind loads. National Bureau of Standards, 1995. http://dx.doi.org/10.6028/nist.tn.1415.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Marx, Benjamin, and Lesley Turner. Borrowing Trouble? Student Loans, the Cost of Borrowing, and Implications for the Effectiveness of Need-Based Grant Aid. National Bureau of Economic Research, 2015. http://dx.doi.org/10.3386/w20850.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!