To see the other types of publications on this topic, follow the link: Balda.

Dissertations / Theses on the topic 'Balda'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Balda.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Balda, Michael [Verfasser], and Joachim [Akademischer Betreuer] Hornegger. "Quantitative Computed Tomography / Michael Balda. Betreuer: Joachim Hornegger." Erlangen : Universitätsbibliothek der Universität Erlangen-Nürnberg, 2011. http://d-nb.info/1016569017/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Halmstad, Sonja. "Water Supply for Irrigation of Balda Lupaxi Bajo, Chimborazo, Ecuador." Thesis, Uppsala University, Department of Earth Sciences, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-88906.

Full text
Abstract:
<p>Denna rapport är en del av en förstudie som syftar att undersöka möjligheterna för ett bevattningsprojekt i de ecuadorianska Anderna. Rapport koncentrerar sig på vatten-tillgången för förstudien Estudio de Prefacitbilidad de un Proyecto de Riego en los Andes – el Caso de Balda Lupaxi Bajo, Chimborazo, Ecuador. Fältundersökningarna gjordes under mars till och med maj 2003 i Balda Lupaxi Bajo, en indian-by i provinsen Chimobrazo. I detta område är nederbörden bristfällig och följaktligen är skörden dålig och det är inte möjligt att bruka jorden under delar av året. Idén till projektet initierades av en bonde-förening som kallas UNASAC. UNASAC kommer att använda rapporten i sitt sökande efter finansiellt stöd för fördjupande studier och slutligen ett genomförande av projektet.</p><p>Målet med denna delrapport är att identifiera en lämplig plats för vattenuttag och att bestämma hur många hektar som kan bevattnas. Vidare presenteras ett förslag till utformning av vattenavledningen. Studien har gjorts genom fältstudier, vattenanalyser, intervjuer och bearbetning av hydrologiska och meteorologiska data.</p><p>Fyra vattenuttagsalternativ undersöktes, både flod- och grundvatten. Det mest lämpliga alternativet enligt denna studie är floden Llinllin. De andra undersökta alternativen förkastades på grund av brist på vatten, otillräcklig vattenkvalitet och höga kostnader. Llinllin-alternativet består av en direkt avledning, en öppen kanal och en sifon. Alternativet kan försörja 250 hektar av bevattnad odlingsmark under de antaganden som är gjorda i rapporten.</p><p>För att fortsätta med detta projekt måste bönderna lösa de sociala problem som finns i och mellan byarna. Kommunicationen med de närliggande byarna är nödvändig. Det finns många intressenter av Llinllin floden och det är nödvändigt att finna en hållbar lösning för vattenuttaget.</p><br><p>This report is a part of a prefeasiblity study to investigate the possibilities to introduce an irrigation system in a rural part of the Andes in Ecuador. The report concentrates on the water supply for the prefeasability study called Estudio de Prefacitbilidad de un Proyecto de Riego en los Andes – el Caso de Balda Lupaxi Bajo, Chimborazo, Ecuador. The field study was carried out in March to May 2003 in the indigenous village of Balda Lupaxi Bajo situated in the province of Chimborazo. In this area the precipitation is inferior throughout the year. Consequently the harvest is poor and it is not possible to cultivate during parts of the year. The project was initiated by UNASAC, an indigenous organization for farmers. UNASAC would use this report for finding finances to complete further studies and finally implement an irrigation system.</p><p>The main aims of this report are to identify a suitable site for water supply and to determine the size of the area possible to irrigate. Further, a distribution design of the water supply has been investigated. This was carried out by field studies, water analyses, interviews and processing of hydrological and meteorological data.</p><p>Four alternatives of water supply were studied, both river and ground water. The most appropriate water supply according to the study is the Llinllin River. The other investigated alternatives were rejected due to lack of water, insufficient water quality and high costs. The Llinllin River alternative consists of a direct abstraction, open channels and a siphon. This alternative can support 250 hectares under the constraints taken in this study.</p><p>In order to continue this project the farmers need to solve the social problems within and between the villages. An improvement of the communication with the nearby villages is necessary. There are many stakeholders involved in the usage of the Llinllin River and therefore it is of great importance to find a sustainable solution for the water abstraction.</p>
APA, Harvard, Vancouver, ISO, and other styles
3

Balda, Cañizares Emilio Rafael [Verfasser], Rudolf [Akademischer Betreuer] Mathar, and Bastian [Akademischer Betreuer] Leibe. "Robustness analysis of deep neural networks in the presence of adversarial perturbations and noisy labels / Emilio Rafael Balda Canizares ; Rudolf Mathar, Bastian Leibe." Aachen : Universitätsbibliothek der RWTH Aachen, 2019. http://d-nb.info/1216040931/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gudačiauskaitė, Dovilė. "Balta balta diena." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2014. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2014~D_20140703_155402-72946.

Full text
Abstract:
Šiame esė formos rašto darbe, keliauju simbolinę kelionę, kuri neturi aiškaus, konkretaus tikslo, nei uždavinių. Būtis, laikas, atmintis, praeitis, Dievas, gimimas, mirtis, laikinumas, amžinybė – padriki egzitenciniai klausimai, į kuriuos įsižiūriu, bet neatsakinėju. Vadovaujuosi fragmentiškais atminties žemėlapiais, menininkų kūriniais ir jų atsiradimo sąlygomis. Remiuosi fenomenologiniu metodu, kuris pagrįstas refleksija ir reikalauja pakartoti esmines intuicijas, siekia išugdyti dėmesingumą, leidžia naujai įprasminti, kaip ir ką mes išgyvename. Darbo skyrius žymiu dienoraštį primenančiais pavadinimais. Šis fragmentiškas dienoraštis – be pradžios ir be pabaigos (prasidėjęs labai seniai, pasibaigia sugrįžimu į pradžią). Jis tampa svarbia praktinio darbo dalimi, paaiškinimu.<br>In this work written as an essay, I make a symbolic trip which doesn‘t have a clear, precise goal nor aim. Existence, time, memory, past, God, birth, death, temporality, eternity – such are the unbound existential questions which I do look at but do not try to answer. I follow fragmented maps of memory, consider artists‘ creations and the conditions of their appearance. I base myself on phenomenological method which relies on reflection and demands to repeat the essential intuitions, asks to grow attentiveness, permits to give sense to what we experience and how we do it. I give titles to the parts of this work similar to personal diary titles. This fragmented diary is without beginning and without end (it started very long ago and it ends with returning to it‘s starting point). It becomes an important part of the practical work, it‘s explanation.
APA, Harvard, Vancouver, ISO, and other styles
5

Crawford, Christopher John. "A Dendrochronological Analysis of Vegetation Change and Climate History in Two Southern Appalachian Balds, Craggy Gardens and Big Bald, NC." Thesis, Virginia Tech, 2007. http://hdl.handle.net/10919/32381.

Full text
Abstract:
In the southern Appalachians, unforested openings known as balds persist on or near mountain peaks. These high elevation openings support a variety of unusual biota and are considered globally rare as a result of their biodiversity. Balds have historically been subject to both natural and human disturbances. Such historical and more recent disturbances have had a profound impact on vegetation dynamics in these systems. With the use of dendrochronology and GIS, this research project was aimed at 1) reconstructing the temporal and spatial patterns of tree encroachment into Craggy Gardens, a grass/heath bald, and determining the causal factors, and 2) investigating tree-growth responses of Quercus rubra L. to climatic factors at Craggy Gardens and Big Bald, North Carolina (high elevation forest-grass ecotones). Results indicate that historical grazing and land management have been responsible for vegetation changes at Craggy Gardens, in particular the advancement of Quercus rubra L. into the grass bald. Dendrochronological analyses showed that incremental growth of Quercus rubra L. growing in and adjacent to the balds was controlled by spring temperatures and drought conditions over most of the past century, until around 1970, when tree began responding primarily to growing year summer temperatures over the last four decades. This study concluded that land-uses overprinted on climatic conditions have governed local-scale vegetation structure over the past 150 years and without continuing management, trees may continue to advance into Craggy Gardens. Changing human disturbances along with observed climate changes in recent decades provides will most assuredly set the stage for future vegetation changes in southern Appalachians balds.<br>Master of Science
APA, Harvard, Vancouver, ISO, and other styles
6

Kavaliauskaitė, Ieva. "Transformuojami baldai." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2007. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2007~D_20070110_140029-85811.

Full text
Abstract:
Transformable Furniture Master’s Degree Work The theme of the Master’s degree work - “Transformable Furniture” – is a topical issue these days, because the problem of irrational and tasteless furniture as well as interiors still exists. After analysing theories of the development of contemporary material environment as well as philosophical and artistic theories and attitude through the prism of the art and science proportion, the conception of the art playfulness, tendencies of the development of furniture and interior installations, assortment and principles of the creation and art conception as well as ergonomic laws, declared by the Functionality, the Constructivism, the concept of the Master’s degree work was formed, theoretical description was prepared and the universal, transformable furniture of 98 sq. m., designed for the interior was created; it enables to plan the dwelling space rationally and creatively. The project is composed from eleven main objects with continuous transformable modifications of the furniture for individual space. The project is presented on fourteen plane-tables with detailed schemes of each object, visualisations of their position in the interior. Three-dimensional models of each object are presented following a chosen scale of M 1 : 10. After the analysis of theoretical sources and their application in the project, the conclusions were made: transformable furniture enables to form the mobile as well as playful individual space... [to full text]
APA, Harvard, Vancouver, ISO, and other styles
7

Marques, Carlos Euclides. "Balada emblante." reponame:Repositório Institucional da UFSC, 1997. http://repositorio.ufsc.br/xmlui/handle/123456789/77321.

Full text
Abstract:
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Comunicação e Expressão<br>Made available in DSpace on 2012-10-17T02:59:04Z (GMT). No. of bitstreams: 0Bitstream added on 2016-01-08T22:10:22Z : No. of bitstreams: 1 108266.pdf: 2122846 bytes, checksum: edffb23f657a6d0362dcd35fb6d01b54 (MD5)
APA, Harvard, Vancouver, ISO, and other styles
8

Kasčiukaitis, Edmundas. "Klubinių baldų projektas." Bachelor's thesis, Lithuanian Academic Libraries Network (LABT), 2010. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2010~D_20100907_095224-77769.

Full text
Abstract:
Klubinių baldų projektą sudaro fotelis, stalas ir pufas. Pasirinkta ši tema dėl tokių priežasčių: tokio tipo baldų pasirinkimas gan nedidelis, tokio tipo baldai salyginai brangūs ir ši tema man yra artima. Baldų formos ir spalvos įkvėptos gamtos – idėja kilo iš kokoso riešuto. Pagrindiniai kriterijai kuriais vadovautasi: funckionalumas, estetinė išvaizda, aukšta kokybė ir žema kaina. Sukurti baldai yra praktiški dėl keičiamų dažniausiai dėvimų dalių. Ištepus šias dalis ar mechaniškai pažeidus jas galima lengvai pakeisti, tai yra itin aktualu, nes nereikialauja papildomų išlaidų (transportavimas, baldo pervilkimas, darbo kaina). Dėl šios baldo savybės jį lengva pritaikyti prie interjero, gali būti keičiamos spalvos bei medžiagos (oda, audinys ir kt.). Fotelio galinėje dalyje pritvirtinta detalė yra tik mano pasiūlytas sprendinys, dėl baldo unikalios konstrukcijos, gali būti gaminami įvairūs kevalai, kitos formos detalės. Vietoje užrašo „COCONUT“ gali būti naudojami kiti užrašai, kuriuos siekiama populiarinti. Baigiamąjį darbą sudaro penki planšetai, aiškinamasis raštas, brėžinių aplankas, bukletas ir gaminys – fotelis.<br>Club furniture design project consists of a chair, a table and a pouffe. This theme was chosen for the following reasons: the choise of this type of furniture is relatively small, such furniture is expensive and the topic is close to me. The shape and the colour are inspired by nature – the coconut. The main criteria I followed in my diploma work were: functionality, aesthetic appearance, high quality and low price. The created furniture is practical because of the parts that can be replaced. These parts can be easily replaced when smeard or mechanically broken and that is really important because it does not require additional expenses (transportation, furniture reclothing, labour price). Due to these removable parts, the designed furniture can be easily adapted to any interior – the colour and the material of the parts can be changed (leather, cloth, ect.). The attached part in the back of the armchair is my solution, variuos parts of other form can be made and attached. Other notes that are wanted to be populatized can be used instead of „COCONUT“. The Bachelor work consists of five flatbeds, the note folder, the folder of drawings, brochure and the product – an armchair.
APA, Harvard, Vancouver, ISO, and other styles
9

Fagundes, Samuel Mendonca. "Processo de transição de uma banda civil para banda sinfônica." Universidade Federal de Minas Gerais, 2010. http://hdl.handle.net/1843/AAGS-8A7MVK.

Full text
Abstract:
This study aims to describe the transition process from a civilian band to a symphonic band. For this, the unit-case of study will be Banda Nossa Senhora do Carmo de Betim. It focuses more on aspects of their musical practice and the contents of its musical sounds as well as the social-cultural aspects involved in these practices. Observing the music as culture and, consequently, connecting it with the social relations that are established inside the musical group and also music group in the society in which operates. Therefore, it was done an ethnographic study whose theoretical framework is put in ethnomusicology. Social-cultural issues were addressed in order to comprehend the specific musical sound characteristics of the civil band and the symphonic band as being different because they are closely related to the production context and to the context of meaning and value on a scale that is not seen as absolute. Thus, in this study, the civil band and the symphonic band are considerate in their aesthetics and contextual differences. The band of Betim is in a process which aims its transformation to a symphonic band. The research presented here permitted a better comprehension of how this process is happening, so it was realized that the roots of the Betim band as a civil band influenced strongly in the transition, since changes in social meanings that are learned historically occur slowly. In this way, there is still an identification of the Betim Band with a musical practice of a civil band and the older musicians and the audience that knows this band for a long time, manifest a certain resistance to changes that have occurred as the change in repertoire and less participation in events and civic and religious festivities that that they have once participated because they sought to act according to the characteristics of a concert band. On the other hand, it already presents certain characteristics of a concert band, in other words, the Betim band wants to perform new roles. However, it is still an ongoing process<br>O presente estudo tem como objetivo descrever o processo de transição de uma banda civil para banda sinfônica, tendo como unidade-caso a Banda Nossa Senhora do Carmo de Betim. Enfocam-se os aspectos de sua prática musical e seu conteúdo sonoro musical, assim como os aspectos socioculturais envolvidos nessas práticas, percebendo a música como cultura e, conseqüentemente, interligando-a com as relações sociais que se estabelecem no interior do grupo musical e do grupo com a sociedade em que se insere. Portanto, foi feito um estudo de caso realizando uma pesquisa etnográfica cuja referência teórica está posta na etnomusicologia. Foram abordadas questões socioculturais visando compreender as características sonoro-musicais específicas da banda civil e da banda sinfônica, como sendo diferentes por serem intimamente relacionadas ao contexto de produção e de significação e não numa escala de valor tida como absoluta. Assim, nesse estudo, a banda civil e a banda sinfônica são consideradas em suas diferenças estéticas e contextuais. A banda de Betim está num processo que visa sua transformação para uma banda sinfônica. A pesquisa aqui apresentada permitiu uma maior compreensão de como esse processo está ocorrendo, de modo que se percebeu que as raízes da Banda de Betim como banda civil, influenciam incisivamente na transição, uma vez que as mudanças nos significados sociais aprendidos historicamente acontecem lentamente, tendo em vista que estão incutidos na mentalidade coletiva num contexto social que envolve religiosidade, práticas de ritos e significados compartilhados. Desta forma, ainda há identificação da Banda de Betim com a prática musical de uma banda civil e os músicos mais antigos e o público que a conhece de longa data, manifesta certa resistência às alterações que já ocorreram como a mudança no repertório e a questão de participar menos dos eventos e festividades cívicas e religiosas que outrora participava, tendo em vista que tem procurado atuar com características de banda de concerto. Por outro lado, já apresenta certas características de banda de concerto, ou seja, a banda de Betim se porta e pretende estabelecer funções e atuar na comunidade aplicando uma nova concepção musical baseada nos princípios estético-musicais e sociais vinculados à tradição da música de concerto. No entanto, trata-se ainda de um processo em andamento
APA, Harvard, Vancouver, ISO, and other styles
10

Grušaitė, Raimonda. "Modulinis baldas "Domino"." Bachelor's thesis, Lithuanian Academic Libraries Network (LABT), 2010. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2010~D_20100902_234702-68190.

Full text
Abstract:
Didėjantis mūsų gyvenimo tempas, dažniausiai nepalieka laiko poilsiui, bendravimui su artimaisiais, laikas tampa deficitu. Visi priversti skubėti, todėl vis labiau populiaresni tampa dizaino sprendimai, padedantys taupyti brangų laiką, sudarantys galimybę produkto vartotojui pačiam tapti kūrėju formuojant aplinką. Tai paskatino sukurti universalų baldą, lengvai transformuojamą. Šis kūrinys tarnaus ne tik kaip baldas poilsiui, atsipalaidavimui, bet atliks ir žaidybiškumo funkciją, lavins loginį mastymą ir vaizduotę. Bakalauro darbo pavadinimas „ DOMINO“. Tai modulinis transformuojamas baldas, kuris susideda iš 17 dalių. Pagrindas – lagamino formos dėžė, kuri gali transformuotis į minkštasuolį, staliuką su 16 minkštų odinių pagalvėlių, tinkantį laisvalaikio praleidimui, poilsiui, arba tarnauti kaip žaidybinė priemonė. Šį modulinį baldą lengvai galima transformuoti į lagaminą, tai sudarys galimybę jį patogiai transportuoti, panaudoti išvykose, ar poilsiaujant. Šis baldas puikiai tiks tiek mažose tiek didesnėse erdvėse, ar gamtoje. Spalvins komplekto sprendimas juodojo šokolado ir dramblio kaulo spalvos oda, tokį sprendimą lėmė tai, kad šios spalvos tradiciškai naudojamos šiame žaidime, tarpusavyje dera, nėra reiklios, todėl lengvai įsikomponuoja į aplinką, yra raminančios. Šis baldas puikiai tiks ir paaugliams ir suaugusiems.<br>The increasing pace of our lives often leaves no time to relax and communicate with our family and friends and time becomes a deficit. Therefore we can see increasing popularity of  design solutions that help to save valuable time, allowing the user to become himself a product designer in shaping his own environment. This led to the creation of universal furniture which is easily transformed. This creation will serve not only as a piece of furniture for relaxation but will have fuctions of entertaintment and will develop his owner's logical thinking and imagination. The title of this Bachelor's work is "Domino". The object of this work is a transformed modular furniture, which consists of 17 parts. The base of this furniture is suitcase which could be transformed into an armchair and a table with 16 upholstered leather pads, suitable for leisure, relaxation, or serve as a playful tool. This modular furniture could be easily transformed back to the suitcase, this fuction will be convenient to transport it and use during travels. This piece of furniture will suit both for small and large spaces as well as outdoors. Decision for the colour of the furniture was taken in regard of colours traditionally used in the game. Furthermore colours match each other and has calming features, also such combination of the colours is not demanding, so it could be easily integrated to environment. This furniture will be good for both adults and juveniles.
APA, Harvard, Vancouver, ISO, and other styles
11

Castro, Guilherme Gustavo Simões de. "A Banda Dazaranha." reponame:Repositório Institucional da UFSC, 2012. http://repositorio.ufsc.br/xmlui/handle/123456789/92992.

Full text
Abstract:
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Comunicação e Expressão, Programa de Pós-Graduação em Literatura, Florianópolis, 2009<br>Made available in DSpace on 2012-10-24T14:56:04Z (GMT). No. of bitstreams: 1 276393.pdf: 22092432 bytes, checksum: 3fb28ee795632a91173d906d971a55cd (MD5)<br>A presente dissertação tem como principal objetivo a análise do espaço cultural e das mediações culturais da década de 90 em Florianópolis utilizando como corpus as canções da banda Dazaranha. Procurou-se levar em consideração uma concepção de canção formada pelas articulações entre arranjos musicais, letras, instrumentos musicais utilizados, recursos técnicos de gravação, reprodução e distribuição e as influências musicais presentes na sonoridade da banda. Traçou-se também uma trajetória da banda e do circuito musical através de reportagens de jornais do período. Realizou-se ainda uma discussão sobre alguns aspectos da história da música no século XX, o crescimento científico e tecnológico, a ampliação das noções de som e ruído no cotidiano do sujeito contemporâneo que estão presentes nas canções.<br>The present dissertation has as its main objective the analysis of cultural space and cultural mediation of the 90's in Florianópolis using as evidence the songs by Dazaranha. Looking to take into account a concept of the song formed by articulations between musical arrangements, lyrics, musical instruments used, technical resources, recording and distribution and musical influences present in the band. Dash also a trajectory of the band and the musical circuit through newspaper reports of the period. Realize even a discussion of some aspects of music history in the twentieth century, the growth of science and technology, expanding notions of sound and noise in the daily life of the contemporary that are present in the songs.
APA, Harvard, Vancouver, ISO, and other styles
12

Oyarce, Dreckmann Mauricio, Alfero Rodrigo Millar, Tobar Rodrigo Nahum, Vega Patricio Sánchez, and Zumelzu Ursula Ressel. "Banda ancha prepago." Tesis, Universidad de Chile, 2007. http://www.repositorio.uchile.cl/handle/2250/114899.

Full text
Abstract:
Tesis para optar al grado de Magíster en Marketing<br>La Industria de Telecomunicaciones en Chile, se caracteriza por los altos costos de inversión que se requieren para entrar, considerando las políticas regulatorias del país que permite ser un mercado altamente competitivo, con cuatro operadores relevantes que mantienen altos los niveles de competitividad. Los niveles de actividad económica se caracterizan por ser sanos y estables dentro de la región, lo que se apoya en ciertos pilares fundamentales como lo es la solidez del sistema financiero. La Industria de las Telecomunicaciones es un sector sujeto a rápidos e importantes avances tecnológicos y a la introducción de nuevos productos y servicios. El mercado de Banda Ancha, está representado por dos grandes participantes, cuyas tecnologías de acceso Banda Ancha son, ADSL para el caso de Telefónica Chile y Cable-Modem para VTR. El mercado de Banda Ancha, se caracteriza por disponer de siete participantes: Telefónica Chile, VTR, ENTEL, Manquehue-GTD, Telmex, Telsur, y CMET, los cuales cuentan con ofertas muy agresivas en precios y concentradas en paquetizaciones (Internet, telefonía y Televisión de pago). Los actores con mayor relevancia dentro de la categoría Banda Ancha en hogares son: Telefónica con una participación cercana al 50%, VTR con alrededor de un 40% y Telefónica del sur con un 5%. Por otro lado, pese a la cantidad de participantes, la cobertura de los servicios juega un rol muy importante, especialmente en regiones. El uso que le entregan los consumidores a Internet es muy variado y pasa desde una mera fuente de información hasta un medio de unión de “jugadores virtuales”, por lo que no existe un sustituto completo del producto, sino que productos que remplazan una parte de sus funcionalidades. Dentro de los factores de éxito de la empresa Telefónica, se puede nombrar el excelente nivel de cobertura geográfica que permite tener una cantidad de clientes potenciales mayor que otras empresas, un importante mix de productos y servicios que permiten desarrollar interesantes ofertas paquetizadas y el respaldo de un grupo transnacional, líder mundial en la Industria de las Telecomunicaciones. Telefónica no posee una marca bien posicionada dentro de los consumidores, especialmente en los grupos socioeconómicos ABC1, debido principalmente a los procesos de atención de cara al cliente, sin embargo se están realizando constantes esfuerzos en mejorarlos para, al menos, igualar los niveles de la competencia. El desafío de la empresa es saber capturar oportunamente, los grupos de menores ingresos, donde geográficamente la competencia no ha logrado entrar y potenciar las paquetizaciones con nuevos productos orientados a sus necesidades. Sin embargo, se debe considerar la agresividad comercial de VTR, el potencial de Telmex como nuevo entrante a la categoría y los peligros de una telefonía móvil que se acerca rápidamente a tener un servicio de Internet estable y veloz.
APA, Harvard, Vancouver, ISO, and other styles
13

Banda, Juan. "Framework for creating large-scale content-based image retrieval system (CBIR) for solar data analysis." Diss., Montana State University, 2011. http://etd.lib.montana.edu/etd/2011/banda/BandaJ0511.pdf.

Full text
Abstract:
With the launch of NASA's Solar Dynamics Observatory mission, a whole new age of high-quality solar image analysis was started. With the generation of over 1.5 Terabytes of solar images, per day, that are ten times higher resolution than high-definition television, the task of analyzing them by scientists by hand is simply impossible. The storage of all these images becomes a second problem of importance due to the fact that there is only one full copy of this repository in the world, therefore an alternate and compressed representation of these images is of vital importance. Current automated image processing approaches in solar physics are entirely dedicated to analyze individual types of solar phenomena and do not allow researchers to conveniently query the whole Solar Dynamics Observatory repository for similar images of their interests. We developed a Content-based Image Retrieval system that can automatically analyze and retrieve multiple different types of solar phenomena, this will fundamentally change the way researchers look for solar images in a similar way as Google changed the way people searched the internet. During the development of our system, we created a framework that would allow researchers to tweak and develop their own content-based image retrieval systems for different domain-specific applications with great ease and a deeper understanding of the representation of domain-specific image data. This framework incorporates many different aspects of image processing and information retrieval such as: image parameter extraction for reduced representation of solar images, image parameter evaluation for validation of image parameters used, evaluation of multiple dissimilarity measures for more accurate data analysis, analyses of dimensionality reduction methods to help reduce storage and processing costs, and indexing and retrieval algorithms for faster and more efficient search. The capabilities of this framework have never been available together as an open source and comprehensive software package. With these unique capabilities, we achieved a higher level of knowledge of our solar data and validated each of our steps into the creation of our solar content-based image retrieval system with an exhaustive evaluation. The contributions of our framework will allow researchers to tweak and develop new content-based image retrieval systems for other domains (e.g astronomy, medical field) and will allow the migration of astrophysics research from the individual analysis of solar phenomenon into larger-scale data analyses.
APA, Harvard, Vancouver, ISO, and other styles
14

MÉLO, Dilermando Ramalho de. "Antenas compactas de microondas de banda larga e banda ultra-larga (UWB)." Universidade Federal do Pará, 2011. http://repositorio.ufpa.br/jspui/handle/2011/3003.

Full text
Abstract:
Submitted by Samira Prince (prince@ufpa.br) on 2012-09-25T15:13:45Z No. of bitstreams: 2 license_rdf: 23898 bytes, checksum: e363e809996cf46ada20da1accfcd9c7 (MD5) Tese_AntenasCompactasMicroondas.pdf: 1928170 bytes, checksum: 4d16ae45705cf87246125e048a65a612 (MD5)<br>Approved for entry into archive by Ana Rosa Silva(arosa@ufpa.br) on 2012-09-28T17:21:47Z (GMT) No. of bitstreams: 2 license_rdf: 23898 bytes, checksum: e363e809996cf46ada20da1accfcd9c7 (MD5) Tese_AntenasCompactasMicroondas.pdf: 1928170 bytes, checksum: 4d16ae45705cf87246125e048a65a612 (MD5)<br>Made available in DSpace on 2012-09-28T17:21:47Z (GMT). No. of bitstreams: 2 license_rdf: 23898 bytes, checksum: e363e809996cf46ada20da1accfcd9c7 (MD5) Tese_AntenasCompactasMicroondas.pdf: 1928170 bytes, checksum: 4d16ae45705cf87246125e048a65a612 (MD5) Previous issue date: 2011<br>FAPEAM - Fundação de Amparo à Pesquisa do Estado do Amazonas<br>Nos últimos anos, com o surgimento de novos serviços e equipamentos para o sistema de comunicação móvel com maiores larguras de banda de operação e ocupando espaços cada vez menores, o desenvolvimento de novas antenas de bandas largas e com dimensões pequenas se tornou um dos principais desafios das pesquisas na área de antenas. Neste trabalho, duas estruturas de antenas de bandas largas e dimensões reduzidas foram analisadas e otimizadas. Na primeira parte, a antena filamentar monopolo dobrado (Wire Built-in Folded Monopole Antenna, W-BFMA) foi investigada e teve sua largura de banda otimizada, conectada a linha de alimentação em diferentes impedâncias. Para modelar a estrutura da antena W-BFMA foi usado o método numérico dos momentos (Method of Moments - MoM), e para sua otimização os métodos: paramétrico, hill climbing e algoritmo genético (AG). Programas computacionais baseados na linguagem Matlab foram desenvolvidos para modelagem, otimização e cálculos das principais curvas características da antena W-BFMA. Na segunda parte, duas diferentes configurações de antenas monopolos planos usando a tecnologia de banda ultra-larga (Ultra- Wideband Antenna, UWB) foram investigadas e otimizadas com a ajuda do programa comercial Computer Simulation Technology (CST) Microwave Studio. Ambas as antenas UWB foram alimentadas por uma linha de microfita (microstrip line) na impedância de 50Ω. A antena UWB que apresentou melhor resultado teve o seu protótipo construído, as principais curvas características, tais como: perda de retorno, ganho, distribuição de corrente e diagrama de radiação foram analisadas. Os resultados simulados foram comparados com resultados obtidos experimentalmente.<br>In the last years, with the sprouting of new services and devices for the system of mobile communication that have large bandwidths of operation band frequency and occupying small volumes, the development of new antennas of broad bands and with reduced dimensions if became one of the main challenges of the research in the field of antennas. In the present work, two structures of large bandwidth antennas and dimensions reduced had been analyzed and optimized. In the first part, the wire built-in folded monopole antenna (W-BFMA) was investigated and optimized in different feeding impedances. For modeling of antenna structure W-BFMA the numerical method of moments (MoM) was used, and for its optimization the methods: parametric, hill climbing and genetic algorithm (GA) were used. Computational programs based in the Matlab language had been developed for modeling, optimizing, and generation of the main characteristic curves of the antenna. In the second part, two different configurations of planar monopole antennas using the technology ultrawideband (UWB) had been investigated and optimized with the aid of commercial program CST - Microwave Studio. Both UWB antennas had been fed by a line of microstrip in the impedance of 50Ω. The UWB antenna with the small return loss was constructed and measured experimentally. The main characteristic curves of the antenna as return losses, gain and radiation patterns had been analyzed. The simulated results had been compared with the measured results.
APA, Harvard, Vancouver, ISO, and other styles
15

Bendikaitė, Renida. "Modulinių laukiamojo baldų projektas." Bachelor's thesis, Lithuanian Academic Libraries Network (LABT), 2010. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2010~D_20100902_231103-68342.

Full text
Abstract:
Pateikiami trys modulinių laukiamojo baldų variantai. Pagrindinė medžiaga, iš kurios padaryti baldai, yra plastikas. Plastikiniai baldai patogūs, juos paprasta prižiūrėti, lengva pernešti iš vienos vietos į kitą, ir jie yra pigesni. Norint pakeisti baldų išdėstymą nekils problemų. Šiame projekte nėra prisirišama prie plano, moduliniai baldai projektuoti oro uosto laukiamojo salei. Tačiau juos galima pritaikyti ir kitose viešose erdvėse kaip traukinių, autobusų stotis ir t.t. Atrinktos penkios idėjos, iš kurių trys galutinai išplėtotos. Visuose trijuose variantuose suprojektuotas šviečiantis modulis, centrinis akcentas su vandeniu, ir galimybe atsisėsti. Pirmajį variantą sudaro šviečiantis elementas bukam kampui, metalinis elementas stačiam kampui, plastikinis elementas smailiam kampui, plastikinė kilpa, šiukšliadėžė, centrinis akcentas. Centrinis akcentas jungia grindis ir lubas, jame įrengtas LED apšvietimas, tekančio vandens atkarpa. Antrajį variantą sudaro koriuko formos elementai – elementas atsisėsti be atlošo, šviečiantis elementas atsisėsti su atlošu, elementas su jame pasėta žole, šiukšliadėžė, centrinis akcentas. Centrinis akcentas suprojektuotas iš skirtingų dydžių korio formos marmuro plokštumų, jame įrengtas apšvietimas ir vandens telkinys. Trečiajį variantą sudaro sėdimoji dalis, šviečiantis elementas, šiukšliadėžė, centrinis akcentas. Centriniame akcente įrengtas fontanas, padaryti platesni fontano kraštai, kad būtų galima prisėsti. Po sėdimosios dalies... [toliau žr. visą tekstą]<br>Three variations of the modular lounge furniture are presented. The main material used to make furniture is plastic. Plastic furniture is comfortable and cheaper. It is easy to handle and move from one place to another. Therefore the change of furniture arrangement does not cause any problems. This project does not accurately follow the plan; modular furniture was designed for the airport departue lounge, but it can be adjusted to use in other public space, such as ralway or bus station, etc. Five ideas were chosen and three of them were developed till the end. All three variations include a luminous module as a central part with water and sitting possibility designed. The first variation consists of luminous element for a blunt corner, metal element for a sharp corner, plastic element for an acute corner, plastic loop, litterbin and a central part. Central part ties in a floor with a ceiling, it includes LED ilumination and running water segment installed. The second variation consists of the comb form elements – sitting element without a backrest, luminous sitting element with a backrest, element with a grass inside it, litterbin and a central part. Central part is designed using different sizes of the comb form marble flats with illumination and water body installed. The third variation consists of the sitting part, luminous element, litterbin and central part. Central part includes a fountain with wide edges to sit on. Illumination is installed under the sitting part.
APA, Harvard, Vancouver, ISO, and other styles
16

Žilys, Irmantas. "DEKORATYVUS DAUGIAFUNKCINIS BALDAS „KUBAS“." Bachelor's thesis, Lithuanian Academic Libraries Network (LABT), 2010. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2010~D_20100903_084103-14041.

Full text
Abstract:
Bakalauro darbo tikslas sukurti dekoratyvų daugiafunkcinį baldą „KUBAS“. Kūrybiniame procese naudojamos informacijos šaltinių studijos. Nagrinėjama istorinė baldų raida, baldų rūšys, medžiagos naudojamos baldų gamyboje. Kūrybinio darbo idėjos paieškoje naudojant informacijos šaltiniuose pateiktą medžiagą nagrinėjama konceptualių, ekologiškų ir daugiafunkcinių baldų gamyba ir pritaikymas interjere. Išnagrinėjus šią medžiagą pristatoma galutinė gaminio idėja – dekoratyvus daugiafunkcinis baldas „KUBAS“. Įgyvendinant idėją kuriami eskizai, braižomi brėžiniai, gaminamas maketas. Praėjus šiuos kūrybinio darbo etapus, pasirinkus medžiagas ir suplanavus darbo eigą pagaminamas „KUBAS“. Dekoratyvaus daugiafunkcinio baldo kūrybinio darbo proceso patirtis bus pritaikoma technologinio ugdymo procese.<br>Bachelor's goal to create a decorative multi - functional furniture "Cube". Creative process, sources of information used in studies. Examining the historical development of furniture, furniture types of materials used in furniture manufacturing. Creative ideas for job search information sources using the material at issue in the conceptual, eco - friendly and multi - functional furniture and interior applications. Examination of the material presented in the final product idea - a multifunctional piece of furniture decorated with "Cube". Implementing the idea of creating sketches, drawings are done and made model. After these stages of the creative work, selecting materials and planning of the work produced in the course "Cube". Decorative multi - functional piece of furniture the creative process of working experience will be adapted to technological education.
APA, Harvard, Vancouver, ISO, and other styles
17

Álvarez, Guzmán Sheilla, Malca Pamela Casahuamán, Cornejo Alexandra Chinchayán, and Rios Gidged Ponce. "Proyecto multifamiliar Balta 1070." Universidad Peruana de Ciencias Aplicadas - UPC. Escuela de Postgrado, 2009. http://hdl.handle.net/10757/274001.

Full text
Abstract:
En el proyecto a desarrollar en este plan de tesis, se optó por un edificio de vivienda en Miraflores, el cual es considerado el distrito más céntrico de todos, y se apunta a un grupo selecto de posibles compradores, tiene una excelente ubicación con vista al mar, estos factores y la creciente demanda de viviendas para este sector, es lo que nos llevó a elegir este proyecto como tesis para el diplomado, para lo cual se va hacer el estudio correspondiente para determinar su rentabilidad
APA, Harvard, Vancouver, ISO, and other styles
18

Lima, Patrick André de Amorim. "Projeto Método Para Banda." Escola de Música da Universidade Federal da Bahia, 2014. http://repositorio.ufba.br/ri/handle/ri/21601.

Full text
Abstract:
Submitted by Patrick Lima (patandrewsgroup@gmail.com) on 2017-01-19T18:31:21Z No. of bitstreams: 1 TCF_Projeto_Metodo_Para_Banda-Patrick.pdf: 1217482 bytes, checksum: 7d57fa4e775c17518c5da428738b2730 (MD5)<br>Approved for entry into archive by Nilson Nascimento Souza (nilson@ufba.br) on 2017-03-02T17:19:29Z (GMT) No. of bitstreams: 1 TCF_Projeto_Metodo_Para_Banda-Patrick.pdf: 1217482 bytes, checksum: 7d57fa4e775c17518c5da428738b2730 (MD5)<br>Made available in DSpace on 2017-03-02T17:19:29Z (GMT). No. of bitstreams: 1 TCF_Projeto_Metodo_Para_Banda-Patrick.pdf: 1217482 bytes, checksum: 7d57fa4e775c17518c5da428738b2730 (MD5)<br>Fundação de Amparo à Pesquisa do Estado da Bahia (FAPESB)<br>Este trabalho fala a respeito do projeto de Mestrado Profissional em Educação Musical, pelo Programa de Pós-Graduação Profissional em Música, da UFBA. Foram produzidas composições didáticas para bandas filarmônicas iniciantes, e como meio de apresentação e divulgação, foi criado um website exclusivamente para este fim. O website, de endereço eletrônico http://www.patrickandrews.com.br/wp, além de disponibilizar as obras musicais, mostra processos de criação, exercícios e reflexões pedagógicas, vídeos, fotos e artigos que foram publicados acerca desta pesquisa. Também é apresentado um histórico da Filarmônica Meninos do Engenho, esta que serviu como base para a realização deste projeto. Aqui será exposto uma explicação a respeito do funcionamento do website bem como a exposição de parte do conteúdo presente nele. O produto final resulta no Projeto Método para Banda, que, além de disponibilizar as partituras das músicas, busca oferecer meios que facilitem a outros educadores interessados no tema.<br>This work talks about the project in the Master Program in Music Education, by the Professional Graduate Program in Music, at the Federal University of Bahia. Were produced didactic compositions to beginners wind bands, and as a means of presentation and disclosure, a website has been created exclusively for this purpose. The website which link access is http://www.patrickandrews.com.br/wp, in addition to providing musical compositions, shows creation processes, exercises and educational reflections, videos, photos and articles that have been published on this research. It is also presented a history of "Meninos do Engenho" Philharmonic, which was the basis for the realization of this project. Here you will be exposed an explanation of the operation of the website and some of its content. The final product results in the Method for Band Project, which, in addition to providing the scores of songs, seeks to provide means to facilitate other educators interested in the topic.
APA, Harvard, Vancouver, ISO, and other styles
19

Souza, Erihuus de Luna. "“P’rá ver a banda passar”: uma etnografia musical da Banda Marcial Castro Alves." Universidade Federal da Paraíba, 2010. http://tede.biblioteca.ufpb.br:8080/handle/tede/8757.

Full text
Abstract:
Submitted by Cristhiane Guerra (cristhiane.guerra@gmail.com) on 2017-01-05T16:56:13Z No. of bitstreams: 1 arquivototal.pdf: 26411421 bytes, checksum: 4e95c652883f9637b7450b12a836de29 (MD5)<br>Made available in DSpace on 2017-01-05T16:56:13Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 26411421 bytes, checksum: 4e95c652883f9637b7450b12a836de29 (MD5) Previous issue date: 2010-09-28<br>This work can be divided into four parts. The first part consists in references of theoretical and methodological and contains two chapters. The first chapter contextualizes the marching bands, presenting and describing the methodological procedures used to perform this work, as well as the rationale and literature review. This is the theoretical framework that supports the analysis and subsequent discussion. The second chapter presents the bands in a broad sense and diachronic, since his arrival in Brazil and the course of this story, through Paraíba, definitions of musical bands, the fanfare and marching bands to achieve the specificity of BMCA - Banda Marcial Castro Alves - style and drum corp. The second part consists of the presentation, analysis and discussion of the dice, involving the third chapter, which contextualizes the relationship with the band's social environment, interaction with the community and the school. The fourth chapter presents the transformation of the drum corp fanfare, the BMCA. The third part that covers five chapters describing the forms of admission, teaching and learning music in BMCA, in the form of a daily test.The sixth chapter reports the daily presentations that followed and analyzed during the research, from presentations in theaters, parades and competitions to my participation as a musician in the band. Part Four, chapter seven analyzes of works in styles representative, composed or arranged for bands to BMCA. The final consideration presents some conclusions and possible research contributions.<br>Este trabalho pode ser dividido em quatro partes. A primeira parte consiste nos referenciais teórico-metodológicos e contém dois capítulos. O primeiro capítulo contextualiza as bandas marciais, apresentando e descrevendo os procedimentos metodológicos utilizados para a realização do presente trabalho, assim como a justificativa e a revisão da literatura. Esse referencial teórico é que sustenta a análise e discussão subsequentes. No segundo capítulo apresenta-se as bandas em um sentido amplo e diacrônico, desde a sua chegada no Brasil e o transcorrer desta história, passando pela Paraíba, as definições de bandas musicais, de fanfarras e de bandas marciais até alcançar a especificidade da BMCA – Banda Marcial Castro Alves – e do estilo drum corp. A segunda parte consiste na apresentação, análise e discussões dos dados, envolvendo o terceiro capítulo, que contextualiza a relação da banda com o entorno social, a interação com a comunidade e o espaço escolar. O quarto capítulo apresenta a transformação, de fanfarra a drum corp, da BMCA. A terceira parte que abrange os capítulos cinco que descreve as formas de ingresso, o ensino e a aprendizagem musical na BMCA, em forma de um diário de ensaios. O sexto capítulo reporta ao diário de apresentações que acompanhei e analisei durante a pesquisa, desde apresentações em teatros, desfiles e concursos até minha participação como instrumentista na banda. Quarta parte, capítulo sete analisa de obras, em estilos representativos, compostas para bandas ou arranjadas para a BMCA. As considerações finais apresentam algumas conclusões, bem como possíveis contribuições da pesquisa.
APA, Harvard, Vancouver, ISO, and other styles
20

Budrys, Raimundas. "Lietuvos baldų pramonės konkurencingumo įvertinimas." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2009. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2006~D_20090908_192101-79314.

Full text
Abstract:
Magistratūros studijų baigiamajme darbe nagrinėjami Lietuvos baldų pramonės konkurenciniai pranašumai, jų išsaugojimo ir sustiprinimo būdai, galimos grėsmės ir galimybės jų išvengti. Darbas susideda iš trijų dalių: teorinės, analitinės ir rezultatų. Teorinėje dalyje pabrėžiama konkurencingumo palaikymo svarba, apžvelgiamos įvairios konkurencingumo teorijos, pradedant Smito tarptautinės prekybos teorijomis ir jos modernizavimo raida, o baigiant Porterio penkių konkurencinių jėgų modeliu ir jo tolimesnio vystymo keliais. Antrojoje darbo dalyje pateikiama situacijos šiuolaikinėje Lietuvos baldų pramonėje analizė, jos raida iki šio laiko, vystymosi tendencijos bei perspektyvos. Pateikiami statistiniai duomenys apie įmonių skaičių, pagrindines įmones, gaminamą produkciją, gamybos ir eksporto apimtis ir jų kitimo dinamiką. Čia taip pat apžvelgta ir bendra situacija Europos baldų pramonėje, bei trumpai apžvelgta atskirų ES šalių baldų pramonė. Pateikta Lietuvos baldų pramonės SSGG analizė. Trečiojoje - rezultatų dalyje, pristatytas atliktas tyrimas, jo metodika, išanalizuoti gauti duomenys. Kadangi situaciją baldų rinkoje geriausiai žino jos dalyviai, čia pateikiama baldų gamybos įmonių vadovų apklausa, kurios metu buvo nustatytos pagrindinės konkurencinės jėgos veikiančios Lietuvos baldų pramonėje, jų išsaugojimo ir sukūrimo keliai. Išvadose pateikiami keliai baldų pramonės konkurenciniaims prašamumams stiprinti bei esamiems išlaikyti.<br>This graduation work emphasis competitiveness issues and perspectives of Lithuanian furniture industry enterprises. Research object - Lithuanian furniture industry companies competitiveness. Research aim is to analyze Lithuanian furniture industry enterprises competitiveness, discover main forces at which are based competitive factors, find possibilities to sustain and develop new competitive factors and possibilities. Work is divided in three main parts. In the first part is given analysis of development theoretical conception of competitiveness from the Smith theories of absolute competitive advantages of countries till the later theories. Analyzed macroeconomics factors influence for industry competitiveness. Section ends with M.Porter model of five competitive forces and his further development. In the second part is analyzed Lithuanian furniture industry current situation and statistics, it’s main development trends, studied strengths and weaknesses (SWOT analysis). Also is given analysis of European Union and world furniture situation. In the third part is presented methodology and results of performed survey, the main obstacles influencing development and sustaining of competitive forces, which are best known by furniture industry enterprises representatives. Main result of this research is established main factors on which Lithuanian furniture industry competitiveness is based. As for today main competitive factor is low production costs, however this factor is... [to full text]
APA, Harvard, Vancouver, ISO, and other styles
21

Balčiūnaitė, Eglė. "Modulinių poilsio baldų projektas Fkeksi." Bachelor's thesis, Lithuanian Academic Libraries Network (LABT), 2013. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2013~D_20130822_105523-76871.

Full text
Abstract:
Baigiamajame darbe nagrinėjami moduliniai poilsio baldai. Darbo pavadinimas – „Modulinių poilsio baldų projektas „Fleksi““. Darbo apimtį sudaro 5 planšetai, filmukas, vaizduojantis sukurtus trimačius baldus, ir aprašas. Bakalauro darbe pateikiamas modulinių poilsio baldų aprašas. Darbą sudaro 7 dalys. Darbo tikslas – paruošti modulinių baldų projektą. Darbo uždavinys – sukurti gražius bei originalius baldus, kuriuos vartotojas galėtų pritaikyti pagal savo poreikius, kuriuos būtų galima lengvai transformuoti ir kurie leistų patirti naujus pojūčius. Darbo eiga prasidėjo nuo prototipų analizės. Nagrinėti įvairūs baldai, ieškant idėjos baldui. Buvo kuriami įvairūs eskizai, iš kurių išsirinkti geriausi. Tuomet buvo kuriamos jų schemos bei tolesni brėžiniai. Galutiniame variante sukurti keturi moduliniai poilsio baldai. Tai – lentyna su sėdima dalimi, staliukas, kėdė ir pakabinama lentyna. Baldus lengva transportuoti ir surinkti. Naujumas: baldai leis patirti naujus pojūčius. Baldus bus galima pritaikyti pagal savo poreikius bei iš turimų modulių sukurti tokį baldą, kokio nori vartotojas – kėdę, staliuką ar lentyną.<br>The final paper analyses modular leisure furniture. Topic: Modular Leisure Furniture Project "Fleksi". Paper volume includes 5 project drawings, video showing the created 3D furniture and description. Bachelor’s paper presents modular leisure furniture description. The paper is made of 8 parts. Aim of the paper: to design a modular leisure furniture project. Task: to create nice and original furniture to be adapted to customer’s needs. Furniture should be easily transformed allowing experiencing new sensations. Course: the work started with prototype analysis. I analysed various furniture in order to find an idea. Then I created various sketches, selected the best ones, made their schemes and further drawings. Finally, four modular leisure furniture pieces were created: the shelf with a sitting place, small table, chair and suspended shelf. The furniture is easy to assemble and transport. Novelty: the furniture will allow experiencing new sensations. The furniture can be adapted to one’s individual needs.
APA, Harvard, Vancouver, ISO, and other styles
22

Alimas, Evaldas. "Baldų gamybos įmonės „Diforma“ elektrifikavimas." Bachelor's thesis, Lithuanian Academic Libraries Network (LABT), 2013. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2013~D_20130822_154415-86543.

Full text
Abstract:
Baigiamajame bakalauro darbe suprojektuotas baldų gamybos įmonės elektros tinklas. Nuosekliai atliktas įmonės elektros energijos tiekimo sistemos projektavimas. Patalpų apšvietimo skaičiavimai atlikti OptiWin 3D pro programa. Grafinėje dalyje pateikta: skaičiuojamoji elektros tinklo schema, galios tinklo instaliacijos planas, apšvietimo tinklo instaliacijos planas. Darbo aiškinamasis raštas sudarytas iš šių dalių: įvado, pagrindinių projekto rodiklių, elektros tinklo sistemos parinkimo, šviesotechninių skaičiavimų, galios tinklo skaičiavimų, laidiklių parinkimo ir tikrinimo, įtampos nuostolių ir nuokrypų skaičiavimo, komutacinių ir apsaugos aparatų parinkimo, trumpojo jungimo srovių skaičiavimo, reaktyviosios galios kompensavimo, elektros energijos apskaitos, įžeminimo projektavimo, įrenginių ir medžiagų žiniaraščio, išvadų, literatūros sąrašo.<br>In this final bachelor paper an electrical network of furniture production company have been designed. The designing of factory power supply system have been made coherently. Indoor lighting calculations have been performed using OptiWin 3D pro program. In the graphical part of the bachelor paper are presented: computational scheme of electrical network, installation plan of power network and installation plan of lightning network. Explanatory notes of the bachelor paper consist of the following parts: introduction, the main indexes of the project, selection of electricity network system, calculations of lightning and power network, selection and verification of conductors, calculations of voltage losses and deviation, calculation of short circuit current, selection of commutation and protection devices, compensation of reactive power, accounting of electricity power, grounding protection, list of equipment and material, conclusions, references.
APA, Harvard, Vancouver, ISO, and other styles
23

Lauretti, Samuel Rocha. "Amplificadores banda larga em microondas." [s.n.], 1993. http://repositorio.unicamp.br/jspui/handle/REPOSIP/261610.

Full text
Abstract:
Orientador: Rui Fragassi Souza<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica<br>Made available in DSpace on 2018-07-19T03:33:18Z (GMT). No. of bitstreams: 1 Lauretti_SamuelRocha_M.pdf: 8284050 bytes, checksum: ac88518a6e072d1fbcd819464fe9551a (MD5) Previous issue date: 1993<br>Resumo: Este trabalho apresenta um estudo comparativo entre quatro configurações de amplificadores banda-larga, na faixa de microondas. Os amplificadores abordados foram: realimentado, distribuído, com casamento por perdas e cascode. É mostrada uma análise teórica e a seqüência de projeto, incluindo uma simulação computadorizada, de cada configuração. Para que os resultados das simulações fossem os mais fidedignos possíveis, foi feito um modelamento em freqüência de todos os componentes, passivos e ativos, utilizados. Foram implementados cinco protótipos, um de cada configuração estudada e de um amplificador balanceado, a título de exemplo. Fina1izado, é apresentada uma comparação entre os desempenhos e os custos estimados destes protótipos. Também foram mostrados alguns exemplos de amplificadores comercialmente disponíveis, de forma a possibilitar uma comparação mais abrangente<br>Abstract: This work presents a comparative study of four broadband microwave amplifier concepts. These concepts here described are the feedbaek:,distributed, lossy-mateh and cascode amplifiers. Initially, a theoretical analysis and the design of each amplifier are shown, including computer simulations. To assure good agreement between results and measurements, a frequeney modelling of alI components used, active and passive, was done. Five prototypes were implemented and tested, one for each amplifier topology, including a balanced amplifier, as a starting example. Finally, a comparison of their performance and the estimated cost of such circuits are presented. Commercially available amplifiers are aIso shown, as examples, to allow a more complete overview of the area of broadband microwave amplification<br>Mestrado<br>Mestre em Engenharia Elétrica
APA, Harvard, Vancouver, ISO, and other styles
24

Campos, Claudio Henrique Altieri de. "Subindo a serra: Banda Mantiqueira." Universidade de São Paulo, 2008. http://www.teses.usp.br/teses/disponiveis/27/27157/tde-07052009-154924/.

Full text
Abstract:
A presente dissertação tem como objetivo estudar o conjunto brasileiro Banda Mantiqueira, sua trajetória histórica e musical, sua produção artística e a elaboração de seu discurso musical, abrangendo o período que se estende do início dos anos 1990 até a atualidade. O primeiro capítulo volta-se para os precursores históricos da Mantiqueira. No capítulo 2, são apresentadas informações memoriais e historiográficas sobre a biografia de alguns de seus integrantes, bem como o surgimento, amadurecimento e consolidação do grupo. O terceiro capítulo propõe um mergulho no material musical produzido pela banda buscando, além da análise individual das performances de seus arranjos, um diálogo com as versões originais e/ou anteriores do repertório selecionado para estudo. Ao longo da última seção, são discutidas questões referentes às opções estéticas e poéticas assumidas pela Banda Mantiqueira.<br>The goal of this current dissertation is to study the Brazilian Group Banda Mantiqueira, its musical and historical path, its artistic production and the development of its musical discourse from the beginnings of 1990 until nowadays. The first chapter is dedicated to the historical forerunners of Mantiqueira. The second chapter displays historical and mnemonical data about some of its members as well as its appearance, maturation and consolidation. The third chapter proposes a diving into the works produced by the band including, besides the analysis of its individual performances, a dialogue between them and the older versions of the repertoire chosen for this study. Throughout the last section it will be discussed the aesthetical and poetical options taken by the Banda Mantiqueira.
APA, Harvard, Vancouver, ISO, and other styles
25

Santos, Maria Auxiliadora Ferreira dos [UNESP]. "Outra banda: lugar de quem?" Universidade Estadual Paulista (UNESP), 2013. http://hdl.handle.net/11449/104454.

Full text
Abstract:
Made available in DSpace on 2014-06-11T19:33:22Z (GMT). No. of bitstreams: 0 Previous issue date: 2013-04-08Bitstream added on 2014-06-13T19:04:05Z : No. of bitstreams: 1 santos_maf_dr_rcla.pdf: 1623452 bytes, checksum: 691fd50db14430cf0d886619b3920315 (MD5)<br>O lugar, objeto desta pesquisa é o bairro de Outra Banda, localizado no município de Acaraú, no estado do Ceará, caracterizado pelas peculiaridades de um lugar produzido e reproduzido pela ocupação de um povo que exerceu e ainda exerce a atividade econômica da pesca, entre outras, responsáveis pela história local. Entre as atividades se destacam: agricultura de subsistência no passado e de irrigação nos dias atuais; carcinicultura, a atividade do presente; pesca do peixe e da lagosta, em crise nos últimos tempos; mariscagem, desenvolvida em escala artesanal e para o consumo próprio; além das atividades de olarias com retirada de argila nos manguezais; se configurando neste local, ocupação e usos irregulares das suas águas e do seu continente. Este lugar carrega consigo histórias de perdas, especialmente perdas relacionadas a territórios, lugares, espaços produzidos pela economia e pela política. Portanto sua população absorve e internaliza sentimentos de baixo-estima à medida que estereótipos são incorporados e originam práticas que confirmam atributos negativos sobre os lugares, armadilhas produtoras e mantenedoras da depreciação dos espaços destinados à vivência humana. Entende-se que o apego que os indivíduos têm com os lugares responde por acontecimentos atrelados aos valores que se projetam sobre os espaços. Falta-nos, portanto, entender que a sobrevivência humana deve muito à ocupação racional dos lugares e observar o poder do envolvimento das pessoas entre si. Neste contexto, esta pesquisa teve como objetivo central analisar a produção e reprodução do espaço no Bairro de Outra Banda em Acaraú – CE, na compreensão de dois grupos distintos, mas que dividem o mesmo espaço: professores de geografia e pescadores. Constatou-se que os residentes de Outra Banda ainda apresentam vínculos com o lugar...<br>The place, object of this research is the district of Outra Banda, located in the municipality of Acaraú, in Ceará state, characterized by the peculiarities of a place produced and reproduced by the occupation of a people who exercised and still exercises the economic activity of fishing, among others responsible for local history. Among the activities include: subsistence agriculture irrigation in the past and today; shrimp, the activity of this; fishing for fish and lobster in crisis in recent times, shellfish, developed in scale and artisanal for own consumption; Apart from activities with removal of clay potteries in the mangroves; shaping up at this location, occupation and irregular uses of its waters and its mainland. This place carries stories of loss, especially losses related territories, places, spaces produced by the economy and politics. Therefore its population absorbs and internalizes feelings of low esteem as they are embedded stereotypes originate and practices that confirm negative attributes about the places, traps producing and sustaining the depreciation of spaces for human experience. It is understood therefore that attachment that individuals have with the places responsible for events linked to the values that are projected on the spaces. We lack, therefore, understand that human survival owes much to rational occupation of places and observe the power of the involvement of people with each other. In this context, this study aimed to investigate the level of core knowledge that fishermen and teachers have about the spaces and what it brings clarity to the natural environment and humanized as a space produced and reproduced by their actions of the past and present. In this research questionnaires and interviews were applied to geography teachers and fishermen. That consisted residents of Outra Banda still have ties... (Complete abstract click electronic access below)
APA, Harvard, Vancouver, ISO, and other styles
26

Santos, Maria Auxiliadora Ferreira dos. "Outra banda : lugar de quem? /." Rio Claro, 2013. http://hdl.handle.net/11449/104454.

Full text
Abstract:
Orientador: Sílvia Aparecida Guarniei Ortigoza<br>Coorientador: Sandra Eliza Contri Pitton<br>Banca: Amanda Érica Domingos Martins<br>Banca: Bernadete Aparecida Caprioglio de Castro<br>Banca: Isabela de Fátima Fogaça<br>Banca: Maria Juracy Zani dos Santos<br>Resumo: O lugar, objeto desta pesquisa é o bairro de Outra Banda, localizado no município de Acaraú, no estado do Ceará, caracterizado pelas peculiaridades de um lugar produzido e reproduzido pela ocupação de um povo que exerceu e ainda exerce a atividade econômica da pesca, entre outras, responsáveis pela história local. Entre as atividades se destacam: agricultura de subsistência no passado e de irrigação nos dias atuais; carcinicultura, a atividade do presente; pesca do peixe e da lagosta, em crise nos últimos tempos; mariscagem, desenvolvida em escala artesanal e para o consumo próprio; além das atividades de olarias com retirada de argila nos manguezais; se configurando neste local, ocupação e usos irregulares das suas águas e do seu continente. Este lugar carrega consigo histórias de perdas, especialmente perdas relacionadas a territórios, lugares, espaços produzidos pela economia e pela política. Portanto sua população absorve e internaliza sentimentos de baixo-estima à medida que estereótipos são incorporados e originam práticas que confirmam atributos negativos sobre os lugares, armadilhas produtoras e mantenedoras da depreciação dos espaços destinados à vivência humana. Entende-se que o apego que os indivíduos têm com os lugares responde por acontecimentos atrelados aos valores que se projetam sobre os espaços. Falta-nos, portanto, entender que a sobrevivência humana deve muito à ocupação racional dos lugares e observar o poder do envolvimento das pessoas entre si. Neste contexto, esta pesquisa teve como objetivo central analisar a produção e reprodução do espaço no Bairro de Outra Banda em Acaraú - CE, na compreensão de dois grupos distintos, mas que dividem o mesmo espaço: professores de geografia e pescadores. Constatou-se que os residentes de Outra Banda ainda apresentam vínculos com o lugar... (Resumo completo, clicar acesso eletrônico abaixo)<br>Abstract: The place, object of this research is the district of Outra Banda, located in the municipality of Acaraú, in Ceará state, characterized by the peculiarities of a place produced and reproduced by the occupation of a people who exercised and still exercises the economic activity of fishing, among others responsible for local history. Among the activities include: subsistence agriculture irrigation in the past and today; shrimp, the activity of this; fishing for fish and lobster in crisis in recent times, shellfish, developed in scale and artisanal for own consumption; Apart from activities with removal of clay potteries in the mangroves; shaping up at this location, occupation and irregular uses of its waters and its mainland. This place carries stories of loss, especially losses related territories, places, spaces produced by the economy and politics. Therefore its population absorbs and internalizes feelings of low esteem as they are embedded stereotypes originate and practices that confirm negative attributes about the places, traps producing and sustaining the depreciation of spaces for human experience. It is understood therefore that attachment that individuals have with the places responsible for events linked to the values that are projected on the spaces. We lack, therefore, understand that human survival owes much to rational occupation of places and observe the power of the involvement of people with each other. In this context, this study aimed to investigate the level of core knowledge that fishermen and teachers have about the spaces and what it brings clarity to the natural environment and humanized as a space produced and reproduced by their actions of the past and present. In this research questionnaires and interviews were applied to geography teachers and fishermen. That consisted residents of Outra Banda still have ties... (Complete abstract click electronic access below)<br>Doutor
APA, Harvard, Vancouver, ISO, and other styles
27

Guerra, Marcia Pereira. "A banda Pelos de Cachorro." Universidade Federal de Minas Gerais, 2007. http://hdl.handle.net/1843/ECOA-7KGM58.

Full text
Abstract:
This work presents the way of four band musicians from the band Pelos de Cachorro. They are from Aglomerado da Serra, a shanty-town the in south region of Belo Horizonte. Through the aesthetic and social experiment of these young people and trying to understand how and why rock and roll has become their chosen way of expression, we reach questions associated to the urban world in our days: the complexity of the identity formation process, the relation between city centers and outskirts, racial descrimination in Brazil. We understand that rock and roll is not a style which is generally associated to black young people in Brazilian slums. They are more likely to produce rap, funk, pagode or songs inspired in old African roots. How have they practised their black race and how have they taken a position regarding the situations created by racial prejudice? Choosing rock and roll may be interpreted too as an answer to these situations and as a way of reaching again a kind of music that, in its black origin, served as an expression of indignation.<br>Esse trabalho apresenta a trajetória de quatro músicos integrantes de uma banda de rock, a banda Pelos de Cachorro, moradores do Aglomerado da Serra, na região centro sul de Belo Horizonte. Através da experiência estética e social desses jovens, e buscando compreender como e por que o rock se tornou a forma de expressão eleita por eles, chega-se a reflexões sobre questões associadas ao mundo urbano na contemporaneidade: a complexidade dos processos de formação das identidades, a relação entre os centros e as periferias, a discriminação racial no Brasil. Sabe-se que geralmente o rock não é um gênero associado à juventude negra das favelas brasileiras; o que se espera é que façam rap, funk, pagode, ou músicas inspiradas nas raízes africanas ancestrais. Como vivenciam a negritude e se posicionam diante de situações deflagradas pelo preconceito racial? A opção pelo rock pode ser interpretada também como uma resposta a essas situações vividas e como forma de reapropriação de um gênero que na sua origem negra, serviu como expressão de indignação.
APA, Harvard, Vancouver, ISO, and other styles
28

Gonçalves, José Artur da Silva. "Alimentador de chapa em banda." Master's thesis, Universidade de Aveiro, 2014. http://hdl.handle.net/10773/14170.

Full text
Abstract:
Mestrado em Engenharia Mecânica<br>O projeto apresentado visa o desenvolvimento de alimentadores de chapa em banda. Atualmente, devido às exigências do mercado, a conformação metálica vive uma elevada flexibilidade e industrialização de processos satisfazendo as necessidades do mercado. Esta está bastante difundida na área de linhas de máquinas de conformação plástica. No passado, a chapa era alimentada para a prensa manualmente, resultando num elevado número de acidentes e num volume de produção demasiado baixo. Respondendo a estas limitações, associadas também à falta de segurança, apareceram um conjunto de soluções mecânicas para a alimentação automática em que o encaminhamento da chapa estava intrinsecamente sincronizado com o movimento da prensa e com estas os primeiros servos alimentadores. O sistema a desenvolver enquadra-se no tipo dos servoalimentadores. Dimensionou-se um produto universal escalável, não necessitando de desenvolver uma nova solução para cada aplicação. O projeto baseia-se não apenas como solução técnica de um problema específico, mas como uma generalização de diferentes soluções criando uma ferramenta de auxílio capaz de desenvolver alternativas futuras para aplicações concretas. Este inclui as seguintes fases do desenvolvimento de um equipamento industrial: revisão do estado da arte, pré-materialização do projeto, projeto e materialização do alimentador, linha de armazenamento da chapa. A criação de uma ferramenta de consulta do dimensionamento foi desenvolvida para um alimentador e um reservatório de armazenamento com especificações bem definidas. Ao longo do projeto serão apresentadas todas as decisões acerca da sustentabilidade dos componentes críticos fabricados e de mercado.<br>The project aims the development of sheet metal feeders. Presently, due to market demand, the metal forming experiences a high flexibility and industrialization process satisfying market demands. This equipment type is very widespread in the feeding area. In the past, material was feed manually to the press, resulting in a high number of work safety accidents and a low production. Thus, to overcome these situations, a set of mechanical solutions appeared for feeding automatically where feed movement was intrinsically synchronized with press movement and the first servo feed, system was developed. It is a universal scalable product, with no need to develop a new solution for each new application. The project not only serves as a technical solution to a specific problem but also as a generalization of different solutions creating a helper tool that can be used to develop future alternatives for concrete applications. The project includes the following stages of the development of an industrial equipment: review of the state of the art, product concept, embodiment and feeder project, suspended slack loop analysis. A sizing consulting tool was developed the metal feeder and suspended slack loop capacity with well defined specifications. Throughout the project will be present all decisions about the validity of the manufactured and market critical components.
APA, Harvard, Vancouver, ISO, and other styles
29

Führer, Heidrun. "Studien zu Jacob Baldes Jephtias : ein jesuitisches Meditationsdrama aus der Zeit der Gegenreformation /." Lund, 2003. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=012794194&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Sartori, Jose Carlos. "Construção de um sistema para ressonância paramagnética eletrônica em baixa freqüência: banda L e banda S." Universidade de São Paulo, 1991. http://www.teses.usp.br/teses/disponiveis/54/54132/tde-21022014-174647/.

Full text
Abstract:
Neste trabalho são apresentados o desenvolvimento e construção de um sistema de microondas para espectroscopia paramagnética eletrônica em baixa freqüência (bandas L e S). Basicamente o sistema é composto de um oscilador que opera na faixa de 1,0 a 2,0 GHZ, uma cavidade do tipo Bridged Loop-Gap, acopladores direcionais, circuladores, atenuadores, detetor, sistemas de controle automático de freqüência CAF e pré-amplificador. Todo o arranjo compõe uma ponte de microondas que é acoplada à unidade de processamento e registro do espectrômetro VARIAN (E-109) do Laboratório do grupo de biofísica do IFQSC. No sistema apresentado os estágios de amplificação de baixo ruído, circuito de CAF, pré-amplificador e sistema ressonante foram desenvolvidos e implantados localmente. A conveniência em se utilizar um espectrômetro de RPE em baixa freqüência é permitir o estudo de amostras que apresentam características espectrais vindas das interações hiperfinas e superhiperfinas parcialmente resolvidas em freqüências mais altas. Também é possível obter-se parâmetros de energia de campo zero de sistemas de spin com S &#62 1 se o sistema puder ser tratado por métodos aproximativos em banda X. Um exemplo utilizando o íon Cr3+ no garnet CGGG é mostrado neste trabalho<br>In this work a microwave bridge for electron paramagnetic resonance spectroscopy hás been developed. The system is suitable for operation at low frequency, basically L and S-band. It is composed of an oscilator with a 1.0 to 2.0 GHz bandwith, a Bridged loop-gap resonator, directional couplers, circulators, attenuators, reverse diode detector, AFC sub-system and a pré-amplifier. All these modules are assembled to a constitute a microwave bridge, which is coupled to the processing and register unit of the VARIAN E-109 EPR spectometer of the Biophysics Laboratory at IFQSC. The low-noise amplifier, AFC sub-system, pre-amplifier and the Bridged Loop-Gap resonator have been entirely developed in this work. The advantage in the use of the low frequency EPR spectometer is that it allows the study of samples which present paramagnetics structures that are obscured by g-strain at high frequency (X, Q band). These structures come out from hiperfine and superhiperfine poorly resolved in the high frequency range that could be conventienly resolved at low frequency. It is also possible, to obtain the zero field splitting parameters in spin systems with S &#62 1, if a perturbative approximation is useful, comparing the spectre in X and L band. One example of this new approad using Cr3+ as impurity in the CGGG garnet is presented.
APA, Harvard, Vancouver, ISO, and other styles
31

Kimball, Scott Allen. "Behavioral interactions of breeding bald eagles (Haliaeetus luecocephalus) at Lake Cascade, Idaho." [Boise, Idaho] : Boise State University, 2009. http://scholarworks.boisestate.edu/td/40/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Tinkler, Dorothy E. "Ecology of bald eagles during the postfleding [sic] period at rural and suburban nest sites in southwest Florida." Morgantown, W. Va. : [West Virginia University Libraries], 2000. http://etd.wvu.edu/templates/showETD.cfm?recnum=1546.

Full text
Abstract:
Thesis (M.S.)--West Virginia University, 2000.<br>Title from document title page. Document formatted into pages; contains ix, 91 p. : ill. (some col.), maps (some col.) Includes abstract. Includes bibliographical references (p. 34-37).
APA, Harvard, Vancouver, ISO, and other styles
33

Diogo, Maria Fernanda. "De balde e vassoura na mão." Florianópolis, SC, 2005. http://repositorio.ufsc.br/handle/123456789/102856.

Full text
Abstract:
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Filosofia e Ciências Humanas. Programa de Pós-Graduação em Psicologia.<br>Made available in DSpace on 2013-07-16T02:06:33Z (GMT). No. of bitstreams: 1 211927.pdf: 1118478 bytes, checksum: 2020a98a818de5792dce4e7a9d50c3db (MD5)<br>Esta dissertação buscou compreender os sentidos do trabalho para mulheres que exercem funções de limpeza e conservação em empresa prestadora de serviços em Santa Catarina. Sua espinha dorsal foi a perspectiva histórico-dialética, entendendo o sujeito como social e historicamente determinado, constituído e constituinte do contexto no qual está inserido. Foi realizada uma pesquisa de campo de metodologia qualitativa, na forma de estudo de caso. As entrevistas realizadas buscaram encontrar o movimento destas mulheres nos processos de escolha da profissão, os sentidos atribuídos a este trabalho, bem como quais os projetos por elas engendrados. O método de análise foi progressivo-regressivo, baseado na teoria sartreana, buscando destacar a objetivação das subjetividades nos sentidos vertical - contemplando a singularidade na intersecção com a coletividade - e horizontal - considerando as dimensões de passado, presente e futuro. A análise do material obtido demonstrou que a gênese desta escolha foi motivada pela necessidade econômica aliada à baixa escolaridade. Nos sentidos atribuídos ao trabalho destacaram-se aspectos depreciativos e desvalorizantes, contudo este demonstrou ser importante e central na vida destas mulheres. Quanto à dimensão de futuro, esta profissão foi sentida como pouco atrativa e a mudança de emprego, na maioria dos casos, fica na dependência de outra possibilidade de inserção profissional.
APA, Harvard, Vancouver, ISO, and other styles
34

Boaventura, Alírio de Jesus Soares. "Leitor/gravador RFID: banda HF (13.56MHz)." Master's thesis, Universidade de Aveiro, 2009. http://hdl.handle.net/10773/6862.

Full text
Abstract:
Mestrado em Engenharia Electrónica e Telecomunicações<br>Esta dissertação surge no âmbito de uma parceria com a empresa Acronym, Informação e Tecnologia e visa o projecto e desenvolvimento de um leitor/gravador RFID para a banda HF (13.56MHz). O trabalho aqui desenvolvido centra-se essencialmente nas camadas física e MAC referentes à norma ISO14443 – Cartões de Identificação – Cartões sem contacto de proximidade. Uma vez projectado e integrado o hardware, passou-se ao desenvolvimento do firmware que implementa o protocolo ISO14443-A. Foi também criada uma interface simples (Hyperterminal/RS232) que permita ao utilizador, entre outras operações, gravar/ler blocos de dados do transponder.<br>This Thesis is developed in cooperation with Acronym, Informação e Tecnologia Company. The main goal is project an RFID reader/writer device working in the HF band (13.56MHz). We’re working around the ISO14443-A protocol (Contactless integrated circuit(s) cards – Proximity cards) and we are focused in the Physical and Medium Access Control layer. Once all the hardware was integrated, the firmware that supports the ISO14443-A protocol was created. A simple user interface using HyperTerminal/RS232 was developed in order to allow user to access the transponder memory.
APA, Harvard, Vancouver, ISO, and other styles
35

Felizardo, Ana Cristina Costa dos Reis. "Representações de género na Banda Desenhada." Master's thesis, Instituto Superior de Ciências Sociais e Políticas, 2018. http://hdl.handle.net/10400.5/15746.

Full text
Abstract:
Dissertação de Mestrado em Família e Género<br>Este trabalho teve como principal objetivo explorar a forma como a identidade de género tem vindo a ser representada no universo da Banda Desenhada (BD) mainstream norte – americana, de super-heróis e super-heroínas, distribuída em Portugal. Partindo das teorias de género, das teorias do construcionismo social, das várias correntes do feminismo, optámos por um estudo longitudinal, a partir de uma amostra intencional de revistas de BD (comics), produzidos e divulgados desde os anos 60 do século XX até 2017, inclusive, dos principais títulos das duas principais editoras Norte-Americanas: Marvel Comics e DC Comics. Numa abordagem metodológica mista, aplicámos as técnicas de análise de conteúdo, análise narrativa. A análise incidiu sobre a equipa de produção dos comics, em termos representatividade de género, sobre as personagens principais e as narrativas. Aplicámos entrevistas a artistas de BD, na medida em que possam ter tido influências deste tipo de BD, tenham ou não na sua agenda as questões de género. Nas conclusões finais, podemos afirmar que a forma como os estereótipos de género são transmitidos nos comics, bem como os atributos associados, são marcadamente sujeitos a influências externas e crenças individuais do corpo de produção. Contudo, verificamos, desde os anos 1960, até 2017, que as grandes editoras têm vindo a enquadrar-se nas novas realidades sociais: nas equipas de artistas insinua-se maior diversidade de género, o que gera conteúdos onde se integram e interagem personagens desafiadoras da dualidade de género e da hétero-normatividade.<br>This thesis main goal was to understand the way has gender identity has been represented in north-american mainstream comics of super-heroes and super-heroines, distributed in Portugal. Starting from the theories of gender and feminist theories, we opted for a longitudinal study, from an intentional sample of BD magazines (comics), we opted for a longitudinal study of an intentional sample of comics produced and divulged since the 60s of the XXth century until 2017, of the main titles of the leading north-american imprints: Marvel Comics and DC Comics. In a mixed methodological approach, we applied techniques of content analysis and narrative analysis. Our analisys focused on the comics production team, in terms of its gender representation, upon the main characters and the narratives. We conducted interviews with comics artists, having or not in their agenda gender issues. In the final conclusions, we can state that the way gender stereotypes are transmitted in comics, are markedly influenced by external influences and individual beliefs in the production team. Also the major publishers have been placed in the new social realities: artistic teams gender diversified, contents and characters who are challenging gender duality and heteronormativity.<br>N/A
APA, Harvard, Vancouver, ISO, and other styles
36

Bujáková, Veronika. "Rozvoj marketingového mixu prodejny BALA." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2017. http://www.nusl.cz/ntk/nusl-318612.

Full text
Abstract:
This diploma thesis proposes a design on improvement of the level of current marketing mix in a selected bussines. First part is devoted to marketing theoretical knowledge describing its individual tools. Second part is practical and it focuses on analysing the current marketing mix, internal and external environment of the bussines. In the conclusion, a proposal of possible improvement of the marketing mix is drawn based on the analytical part.
APA, Harvard, Vancouver, ISO, and other styles
37

Peixoto, Elisa Vieira Leonel. "Programa nacional de banda larga : análise sobre a formação da agenda da universalização da banda larga no Brasil." reponame:Repositório Institucional da UnB, 2010. http://repositorio.unb.br/handle/10482/6878.

Full text
Abstract:
Dissertação (mestrado)—Universidade de Brasília, Faculdade de Economia, Administração, Contabilidade e Ciência da Informação e Documentação, 2010.<br>Submitted by Thaíza da Silva Santos (thaiza28@hotmail.com) on 2011-02-11T17:27:29Z No. of bitstreams: 1 2010_ElisaVieraLeonelPeixoto.pdf: 490548 bytes, checksum: 89470ac93641f8dde4c05c380eb38122 (MD5)<br>Approved for entry into archive by Guimaraes Jacqueline(jacqueline.guimaraes@bce.unb.br) on 2011-02-14T13:56:45Z (GMT) No. of bitstreams: 1 2010_ElisaVieraLeonelPeixoto.pdf: 490548 bytes, checksum: 89470ac93641f8dde4c05c380eb38122 (MD5)<br>Made available in DSpace on 2011-02-14T13:56:45Z (GMT). No. of bitstreams: 1 2010_ElisaVieraLeonelPeixoto.pdf: 490548 bytes, checksum: 89470ac93641f8dde4c05c380eb38122 (MD5)<br>Em maio de 2010, o Governo Federal anunciou o Programa Nacional de Banda Larga. Estando no último ano de mandato, o Presidente da República decidiu lançar um programa para a universalização da banda larga prevendo, para tanto, dentre outras medidas, a reativação da Telebrás. A pesquisa buscou entender o processo de formação dessa agenda. A pergunta que norteou o trabalho foi: de que forma a política de telecomunicações incorporou a dimensão da universalização da banda larga? Para tanto, foi aplicado o modelo conceitual desenvolvido por Kingdon considerando-se a perspectiva dos múltiplos fluxos. Utilizando-se o método de rastreamento de processo, foram pesquisadas as condições antecedentes à formação da agenda que pudessem explicar de que modo se chegou à tomada de decisão. Dentre as condições antecedentes, foram pesquisados dois aspectos. O primeiro deles referiu-se às condições iniciais relativas à política de telecomunicações e, de maneira mais específica, à universalização de telecomunicações. Também dentre as condições antecedentes, foram identificados quatro eventos que, entendia-se, seriam importantes para explicar a formação da agenda pesquisada. Os eventos estudados foram: 1) tentativa de criação do Serviço de Comunicações Digitais; 2) publicação do estudo Brasil em 3 Tempos pelo Núcleo de Assuntos Estratégicos da Presidência da República; 3) a troca de obrigações de universalização no âmbito do Plano Geral de Metas para a Universalização das Telecomunicações; 4) o comando do Presidente para a elaboração de um plano nacional de banda larga. Como resultado do estudo, foi possível constatar o alto grau de fragmentação do debate em torno da universalização da banda larga no governo federal, a baixa relevância das regras e instrumentos de planejamento formais relativos ao setor de telecomunicações e a participação secundária da sociedade civil e do Poder Legislativo na formação dessa agenda. _____________________________________________________________________________ ABSTRACT<br>In May 2010, the Federal Government announced the National Broadband Program. In the last year of his mandate, the President decided to launch a program for universal broadband providing for that, among other measures, the reactivation of Telebrás. The research aimed to understand this agenda setting. The question that guided the study was: how telecommunications policy has incorporated the dimension of universal broadband? For this, a conceptual model developed by Kingdon was applied, considering the perspective of multiple streams. Using the method of process tracing, it was examined the antecedent conditions of the agenda setting, which could explain how it came to decision making. Among the antecedent conditions two aspects were surveyed. The first referred to the initial conditions on telecommunications policy and, more specifically, the universal service debate. Also among the antecedent conditions, four events were considered important to explain the agenda setting. The events were: 1) attempt to create the Digital Communication Service; 2) the project named “Brazil Three Times” conduced by the Center for Strategic Affairs of the Presidency of the Republic; 3) the exchange of universal service obligations under the General Plan for Universal Service; 4) the command of the President to draw up a national plan for broadband. As a result of the study, it was possible to confirm the high degree of fragmentation of the debate on universal broadband in the Federal Government, the low relevance of rules and formal instruments of planning for telecommunications policy and the secondary involvement of civil society and Legislative in this agenda setting.
APA, Harvard, Vancouver, ISO, and other styles
38

Steinberg, David. "Otimização da largura de banda de ganho de um amplificador Raman na banda "O" baseada em algoritmo genético." Universidade Presbiteriana Mackenzie, 2011. http://tede.mackenzie.br/jspui/handle/tede/1401.

Full text
Abstract:
Made available in DSpace on 2016-03-15T19:37:35Z (GMT). No. of bitstreams: 1 David Steinberg.pdf: 1201176 bytes, checksum: 38de6b0554611de53adf67ca19a556a1 (MD5) Previous issue date: 2011-01-28<br>In this work, the O-band discrete Raman amplifier gain bandwidth optimization using genetic algorithm of a commercial simulator is carried out. The main objective of the study was to optimize the wide Raman amplifier gain bandwidth obtaining values of gain variation less than 0.5 dB. Using a fiber DCF (Dispersion Compensating Fiber) as Raman amplifier medium, the pump number was varied and the gain variation for each pump configuration has been verified. For a fixed 70 nm (1275-1345 nm) bandwidth consisting of 62 signal frequencies points, the results were generated for one, two, three, four, five, six, seven and eight backward pumps, which with the last one it was obtained the best result of 0.35 dB gain variation. In addition to this analysis, it was also found the Raman amplifier noise figure for this band and made a brief comparison with the conventional profile bands.<br>Neste trabalho a otimização da largura de banda de ganho de um amplificador Raman discreto na banda "O" utilizando algoritmo genético de um simulador comercial foi realizada. O objetivo principal do trabalho foi otimizar a maior largura de banda de ganho do amplificador Raman obtendo valores de variação de ganho menores que 0.5 dB. Utilizando uma fibra DCF (Dispersion Compensating Fiber) como meio de ganho do amplificador Raman, o número de bombeio foi variado e a variação de ganho para cada configuração de bombeio foi verificada. Para uma largura de banda fixa em 70 nm (1275-1345 nm) compreendendo 62 pontos de freqüências de sinal, foram gerados resultados para um, dois, três, quatro, cinco, seis, sete e oito bombeios contrapropagantes sendo que com esta última configuração foi obtido o melhor resultado de variação de ganho de 0.35 dB. Além desta análise, também foi verificado o perfil da figura de ruído do amplificador Raman nesta banda e feita uma breve comparação com o perfil em bandas convencionais.
APA, Harvard, Vancouver, ISO, and other styles
39

Cardoso, Marcos Vaz. "Síntese de filtros rejeita-faixa de micro-ondas de banda-larga e dupla-banda empregando estruturas periódicas EBG." Universidade de São Paulo, 2011. http://www.teses.usp.br/teses/disponiveis/3/3140/tde-20032012-112022/.

Full text
Abstract:
Esta dissertação de mestrado apresenta um estudo da aplicação de estruturas Electromagnetic Bandgap (EBG) em circuitos planares de micro-ondas, com a proposição de topologias originais de filtros rejeita-faixa de banda ultra-larga e dupla-banda e de uma metodologia de síntese desses filtros. Foi proposta uma metodologia de projeto de filtros EBG, que foi aplicada a um filtro em microlinha de transmissão utilizando duas estruturas EBG simultâneas, com a finalidade de se obter um filtro com banda de rejeição ultra-larga. Esse filtro foi construído em tecnologia planar, tendo demonstrado uma banda de rejeição ultra-larga de 11 GHz centrada em 11,5 GHz, com nível de rejeição superior a 34 dB, apresentando excelente concordância com os resultados de simulação computacional. Paralelamente, foi desenvolvida uma metodologia de síntese que permite a geração automática de novas topologias de filtros rejeita-faixa empregando estruturas EBG que resultem em uma banda larga de rejeição ou com duplas bandas de rejeição. A metodologia de síntese proposta envolve procedimentos computacionais de otimização da geometria das estruturas EBG aplicadas em microlinha de transmissão, visando a obtenção da resposta em frequência de um filtro definida por meio de uma Função Objetivo. Para esse fim empregou-se a ferramenta computacional MATLAB com o toolbox de algoritmos genéticos para desenvolver um programa de otimização, que interage com o simulador eletromagnético tridimensional EM-3D Microwave Suite da CST. O procedimento de síntese desenvolvido foi aplicado ao projeto de um filtro com dupla-banda de rejeição centradas em 3,3 GHz e 7,8 GHz e de três filtros com característica de rejeição em banda ultra-larga, capazes de rejeitar até uma banda de 9 GHz a 20 GHz com rejeição maior que 10 dB. Os filtros projetados foram construídos em tecnologia planar e caracterizados em frequências de micro-ondas. Os resultados experimentais comprovaram a eficácia e flexibilidade da metodologia de síntese proposta, que possibilitou contribuições originais na área de filtros rejeita-faixa usando estruturas EBG, com topologias inéditas.<br>This dissertation for a Master degree in Engineering, presents a survey of the application of Electromagnetic Bandgap (EBG) structures on microwave planar circuits, with the conception of original topologies for wide stopband and dual stopband filters, and the proposition of a synthesis methodology for these filters. A filter design methodology was proposed and applied to the design of a transmission line filter using two simultaneous EBG structures, aiming at the achievement of a filter with a wide stop-band. This filter was built in planar circuit technology, with the demonstration of an 11 GHz ultra-wide stopband centered in 11.5 GHz, with high degree of rejection superior than 34 dB, presenting excellent agreement with the computational simulation. In parallel, a synthesis methodology was developed to automatically generate new topologies of stopband filters using EBG structures, that results in filters with wide stopband or dual stop-bands. The proposed synthesis methodology involves computational processes for the optimization of the EBG structure geometry applied to microwave transmission line, aiming at achieving the filter response defined by an objective function. For that, the software MATLAB with the genetic algorithm toolbox was used to develop an optimization program, which interacts with the tridimensional electromagnetic simulator EM-3D Microwave Suite from CST. The synthesis procedure was applied to the project of one filter with dual stopband centered in 3.3 GHz and 7.8 GHz and to the project of three filters with an wide stopband feature capable of rejecting a frequency band from 9 GHz to 20 GHz with magnitude of rejection greater than 10 dB. The designed filters were built in planar technology and measured at microwave frequencies. The experimental results demonstrated the effectiveness and the flexibility of the proposed synthesis methodology, which allowed original contributions in the field of stopband filters using EBG structures, with novel topologies.
APA, Harvard, Vancouver, ISO, and other styles
40

Díaz, Salazar Nicole Patricia. "Diseño de superficie selectiva en frecuencia para reflexión de banda 6 y transmisión de banda 9 de Alma." Tesis, Universidad de Chile, 2017. http://repositorio.uchile.cl/handle/2250/148979.

Full text
Abstract:
Ingeniera Civil Eléctrica<br>El presente trabajo corresponde al diseño de una superficie selectiva en frecuencia para interponer en el camino óptico de los receptores de Banda 9 de ALMA. El propósito de la estructura es brindar una reflexión conveniente de la Banda 6 para redirección del haz, preservando una transmisión considerable de la Banda 9, permitiendo la medición simultánea en ambas bandas. Las potenciales simplificaciones constructivas junto a otros atributos, como baja polarizaci ón cruzada asociada, sugieren el uso de una geometría del tipo Cruz de Jerusalén en versión ranurada. Se obtiene un diseño de una sola capa conductora de espesor 30 um, con celda unitaria de 220 um de longitud. La superficie ha sido diseñada considerando que el proceso de manufactura empleará el equipamiento LPKF (cortadora láser) del que dispone el Laboratorio de ondas milimétricas y submilimétricas del departamento de Ingeniería Eléctrica de la Universidad de Chile. La correspondencia entre frecuencias características de la geometría escogida y los má- ximos/mínimos de transmisión deseados fue examinada inicialmente en la versión dipolo. Haciendo uso de la estructura complementaria(ranurada) se escogió que la transmisión fuera monótonamente creciente hasta alcanzar su primer máximo en la frecuencia central de la Banda 9. Esta elección tiene la ventaja de situar las frecuencias relevantes en un rango en que se ven escasamente afectadas por la polarización respecto al plano de incidencia y por el ángulo de incidencia. Así mismo se aseguran anchos de pistas y de celda unitaria mayores que otros modelos basados en segundos o terceros máximos de transmisión, aspecto que puede facilitar la fabricación. La optimización sobre los parámetros geométricos de la estructura lleva a conjuntos de valores sobre los que nuevamente se escoge aquellos que proporcionan mejores desempeños y suponen mayores ventajas constructivas.
APA, Harvard, Vancouver, ISO, and other styles
41

Dominguez, Laura. "Reproductive success and environmental contaminants among bald eagles in Placentia and Bonavista Bays, Newfoundland /." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape7/PQDD_0004/MQ42369.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
42

Ginkus, Edgaras. "Ekologinio produkto strategija Lietuvos baldų pramonės įmonėje." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2009. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2006~D_20090908_193853-77264.

Full text
Abstract:
Tema (Ekologinio produkto strategija Lietuvos baldų pramonės įmonėje) pasirinkta dėl padidėjusio visuomenės domėjimosi aplinkos apsauga, žmogaus aplinka ir ekologinių problemų aktualumo, tiek Lietuvoje, tiek visame pasaulyje. Šiandien vartotojai vis labiau atkreipia dėmesį į terminą „ekologinis produktas“. Pirkdami tokį produktą jie įsivaizduoja, kad įsigyja natūralų, aplinkai bei sveikatai nekenksmingą produktą. Paskutiniu metu pastebimas vis didesnis susidomėjimas ekologiniais baldais. Todėl iškyla problema – kokias ekologinio produkto strategijas reikia parinkti, kad lydėtų sėkmė rinkoje. Darbo tikslas – suformuoti ekologinio produkto strategiją. Darbas sudarytas iš trijų dalių: pirmoje dalyje siekiama išsiaiškinti, kas yra ekologinis produktas, ekologinis marketingas, kaip apibrėžti ekologinių baldų sampratą, apibendrinant skyrių pateikiama ekologinio produkto koncepcija; antroje dalyje apibūdinamas strateginis planavimas bei strategijos formavimo procesas, išanalizuojami produkto strategijos formavimo etapai į juos integravus ekologinius kriterijus, pateikiamo mokslinėje literatūroje aprašytos ekologinio produkto strategijos bei palyginamos su tradicinio produkto strategijomis; trečioje dalyje trumpai apibūdinama Lietuvos baldų pramonė, atliekama baldų įmonės strateginė veiklos analizė, po to nustatomi marketingo ir ekologinių produktų tikslai bei suformuojama strategija tiems tikslams įgyvendinti. Nustatyta, kad formuojant ekologinio produkto strategiją didžiausią įtaką... [toliau žr. visą tekstą]<br>Topic (The strategy of ecologic product in Lithuanian furniture industry’ company) was chosen because of increased interest of society in environment protection, human environment and topicality of ecology in Lithuania, as well as in whole world. More and more customers want to get ecological products. Therefore arise problem, how successfully spread ecological products in the market. Aim of the work – to form strategy of ecological product. Work consists of 3 parts. In first part ecological product is defined, ecological marketing is described, ecological furniture conception is presented and concept of ecological product is exhibited. In second part strategical planning and strategy formation process is defined, stages (with integrated ecological criterions) of product strategy formation is analyzed, strategies of ecological product described in scientific literature are analyzed. In third part after performing strategic analyze of furniture company activity and forming goals of ecological products, strategy for achieving these goals is created. During strategy formation was identified, that the biggest influence for ecological product strategy formation makes different interest groups (stakeholders). During ecological product strategy formation, most attention should be given to ecological factors in different stages of ecological product strategy formation. During work process was identified, that it’s best to use product designing, line expanding, re-positioning... [to full text]
APA, Harvard, Vancouver, ISO, and other styles
43

Azeredo, Ana Patrícia Ferreira de. "A tradução de banda desenhada em Portugal." Dissertação, Porto : [Edição do Autor], 2013. http://aleph.letras.up.pt/F?func=find-b&find_code=SYS&request=000228878.

Full text
Abstract:
O estudo da tradução de banda desenhada tem vindo, lentamente, a ocupar o seu lugar de direito na Teoria da Tradução. No entanto, ainda são poucos os estudos nesta área. O objetivo deste estudo será, então, apresentar uma perspetiva geral da tradução de banda desenhada, os desafios que apresenta aos tradutores e como é encarada em Portugal. Para lá do enquadramento teórico, onde se inclui uma revisão bibliográfica das principais abordagens à tradução de banda desenhada (tradução subordinada, abordagem semiótica e adaptação cultural), procedeu-se à condução de entrevistas aos vários atores do processo de publicação de banda desenhada estrangeira em Portugal, assim como a um questionário realizado aos leitores portugueses de BD, por forma a conhecer a sua opinião e expetativas quanto à oferta tradutiva existente. Concluiu-se então, através de casos práticos, que são vários os aspetos que influenciam o processo de tomada de decisão do tradutor de banda desenhada: o tipo de BD, o público-alvo e o formato de publicação.
APA, Harvard, Vancouver, ISO, and other styles
44

Grilo, Marcus 1987. "Uma antena de banda dupla para RFID." [s.n.], 2012. http://repositorio.unicamp.br/jspui/handle/REPOSIP/267786.

Full text
Abstract:
Orientadores: Francisco José Arnold, Leonardo Lorenzo Bravo Roger<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Tecnologia<br>Made available in DSpace on 2018-08-19T21:46:41Z (GMT). No. of bitstreams: 1 Grilo_Marcus_M.pdf: 4359440 bytes, checksum: 6cae50e622550385b3c928f7055ed0fe (MD5) Previous issue date: 2012<br>Resumo: Este trabalho apresenta a análise, o projeto e a construção de uma antena de banda dupla para as faixas de frequências de 915MHz e 2,45GHz, para aplicação em sistemas RFID. A antena é impressa em um substrato de fibra de vidro e possui estrutura dipolar. Os elementos radiadores estão em faces opostas do substrato o que resulta em baixa capacitância do dispositivo. As simulações computacionais, realizadas no programa HFSS, apresentaram boa concordância com os resultados experimentais. Os resultados mostraram importantes vantagens conseguidas com a antena desenvolvida, tais como estrutura simples e independência e facilidade de sintonia. Além disso, os parâmetros característicos (perda de retorno e ganho) de desempenho da antena são bastante satisfatórios. Propostas para trabalhos futuros também são apresentadas<br>Abstract: This paper presents the analysis, design and construction of a dual band antenna for the frequency bands 915 MHz and 2.45 GHz, for use in RFID systems. The antenna is printed on a substrate of fiberglass and has a dipolar structure. The radiator elements are on opposite faces of the substrate which results in low capacitance of the device. Computer simulations, carried out in the program HFSS, in good agreement with experimental results. The results showed important advantages achieved with the antenna developed, such as simple structure, independence and ease of tuning. Moreover, the characteristic parameters (return loss and gain) antenna performance are quite satisfactory. Proposals for future work are also presented<br>Mestrado<br>Tecnologia e Inovação<br>Mestre em Tecnologia
APA, Harvard, Vancouver, ISO, and other styles
45

Teixeira, Amilton de Matos. "Grupo de renormalização numérico com banda assimétrica." Universidade de São Paulo, 2007. http://www.teses.usp.br/teses/disponiveis/76/76131/tde-17022011-163704/.

Full text
Abstract:
Este trabalho apresenta um tratamento do Grupo de Renormalização Numérico (GRN) que permite a inclusão de assimetrias na banda de condução, como a provocada por campo magnetostático aplicado a sistemas de spins localizados em metais. Resultados para calor específico e suscetibilidade magnética de spin são obtidos para os modelos de Kondo de dois canais (MK2C), de Falikov-Kimball (MFK) e o modelo de nível ressonante na presença dessas assimetrias. São apresentadas soluções para lidar com as oscilações espúrias das curvas do calor específico, inerentes ao GRN. Tais abordagens, contribuíram de forma determinante para a viabilidade dos resultados apresentados aqui para essas grandezas.<br>This work presents an approach to the Numerical Renormalization Group which allows for asymmetries in the conduction band, as those brought about by magnetostatic field applied to a system of localized spin in metal. Results for specific heat and magnetic susceptibility are shown for the two-channel Kondo model, as well for the Falikov-Kimball and resonant level models, in the presence of such asymmetry. In addition, novel treatments were described in order to smooth out the curves of specific heat from the oscilating profile that comes along from NRG calculations. This was of outmost importance for the viability of the results presented here.
APA, Harvard, Vancouver, ISO, and other styles
46

Angélico, Bruno Augusto. "Sistemas de banda ultralarga com pré-processamento." Universidade de São Paulo, 2010. http://www.teses.usp.br/teses/disponiveis/3/3142/tde-20082010-164755/.

Full text
Abstract:
A resposta impulsiva do canal de um sistema de banda ultralarga típico é caracterizada pelo elevado número de percursos discerníveis. Dessa forma, para uma recepção eficiente, a energia espalhada nessas componentes multipercurso deve ser de alguma forma combinada. Considerando o enlace direto (downlink) de uma rede pessoal de curto alcance, assume-se que o ponto de acesso possui uma capacidade de processamento maior do que os dispositivos portáteis a ele conectados, tais como câmeras fotográficas, celulares e aparelhos de MP3. Este trabalho se concentra no estudo de esquemas de pré-processamento em ambientes mono e multiusuário, com vistas a combinar eficientemente a energia espalhada nas componentes multipercurso do canal e, consequentemente, combater a autointerferência e a interferência entre usuários, sem agregar muito custo computacional ao receptor (dispositivos portáteis da rede). Com isso, boa parte da complexidade é transferida para o transmissor (ponto de acesso), de forma que o receptor necessite apenas de um detector convencional, ou então de um detector convencional seguido de processamento adicional de complexidade moderada para mitigar a interferência residual.<br>The channel impulse response of a typical ultra wideband system is characterized by a large number of resolvable paths. For a efficient reception, the energy spread over the multipath components has to be somehow combined. Considering the downlink of a wireless personal area network, the access point is assumed to have a good hardware capacity when compared to the portable devices of the network, such as digital cameras, cell phones and MP3 players. This work focuses on preprocessing schemes that are able to combine efficiently the multipath components, and to combat self and multiuser interference without increasing the computational cost at the receiver (portable devices) substantially. Hence, most of the complexity is transferred to the transmitter (access point) in such a way that the receiver needs only a conventional detector or a conventional detector followed by a moderated complexity processing in order to mitigate the residual interference.
APA, Harvard, Vancouver, ISO, and other styles
47

Rodrigues, Vanderlene da Silva. "Políticas públicas para massificação da banda larga." reponame:Repositório Institucional da UnB, 2015. http://dx.doi.org/10.26512/2015.06.D.20056.

Full text
Abstract:
Dissertação (mestrado)—Universidade de Brasília, Faculdade de Economia, Administração e Contabilidade, Mestrado em Economia do Setor Público, 2015.<br>Submitted by Fernanda Percia França (fernandafranca@bce.unb.br) on 2016-04-22T17:07:16Z No. of bitstreams: 1 2015_VanderlenedaSilvaRodrigues.pdf: 508011 bytes, checksum: c0354c6d79ddc6d60dc828c52e5d035c (MD5)<br>Approved for entry into archive by Guimaraes Jacqueline(jacqueline.guimaraes@bce.unb.br) on 2016-04-29T12:43:53Z (GMT) No. of bitstreams: 1 2015_VanderlenedaSilvaRodrigues.pdf: 508011 bytes, checksum: c0354c6d79ddc6d60dc828c52e5d035c (MD5)<br>Made available in DSpace on 2016-04-29T12:43:53Z (GMT). No. of bitstreams: 1 2015_VanderlenedaSilvaRodrigues.pdf: 508011 bytes, checksum: c0354c6d79ddc6d60dc828c52e5d035c (MD5)<br>A banda larga faz parte das Tecnologias da Informação e da Comunicação (TICs), as quais se consolidam como importantes instrumentos para o acesso democrático à informação. Nesta pesquisa, os impactos positivos do uso da banda larga são analisados pelas perspectivas econômica e social. Por outro lado, as dificuldades para a difusão da tecnologia abordada constituem-setambém questões relevantes.Objetiva-se apresentar a evolução da banda larga no Brasil em suas dimensões geográfica e socioeconômica e o papel das políticas públicas. Vários elementos se apresentam para comparação e posterior análise dos desafios de implementação da banda larga no mundo e no Brasil, em particular. Nessa linha, conclui-se que o Plano Nacional de Banda Larga (PNBL) ajudou a desenvolver este recurso no Brasil, expandindo o número de redes e o de acessos à internet.<br>Broadband is part of information and communication technologies (ICTs), which consolidate as important instruments for democratic access to information. In this research, the positive impacts of the use of broadband are analyzed from the social and economic perspective. On the other hand, the difficulties for technology diffusion isalso a relevant issue. The goal is to present the evolution of broadband in Brazil in their geographic and socioeconomic dimensions and the role of public policies. Several elements are presented for comparison and further analysis of the challenges of broadband implementation in the world and Brazil in particular. In this regard, it concludes that the national broadband plan (PNBL) helped to develop this feature in Brazil, expanding the number of networks and internet access.
APA, Harvard, Vancouver, ISO, and other styles
48

Madureira, Miguel Ângelo Martins. "Projecto de receptores integrados de banda larga." Doctoral thesis, Universidade de Aveiro, 2010. http://hdl.handle.net/10773/2234.

Full text
Abstract:
Doutoramento em Engenharia Electrónica e Telecomunicações<br>O presente trabalho tem como objectivo o estudo e projecto de receptores optimizados para sistemas de comunicações por fibra óptica de muito alto débito (10Gb/s e 40Gb/s), com a capacidade integrada de compensação adaptativa pós-detecção da distorção originada pela característica de dispersão cromática e de polarização do canal óptico. O capítulo 1 detalha o âmbito de aplicabilidade destes receptores em sistemas de comunicações ópticas com multiplexagem no comprimento de onda (WDM) actuais. O capítulo apresenta ainda os objectivos e principais contribuições desta tese. O capítulo 2 detalha o projecto de um amplificador pós-detecção adequado para sistemas de comunicação ópticos com taxa de transmissão de 10Gb/s. São discutidas as topologias mais adequadas para amplificadores pós detecção e apresentados os critérios que ditaram a escolha da topologia de transimpedância bem como as condições que permitem optimizar o seu desempenho em termos de largura de banda, ganho e ruído. Para além disso são abordados aspectos relacionados com a implementação física em tecnologia monolítica de microondas (MMIC), focando em particular o impacto destes no desempenho do circuito, como é o caso do efeito dos componentes extrínsecos ao circuito monolítico, em particular as ligações por fio condutor do monólito ao circuito externo. Este amplificador foi projectado e produzido em tecnologia pHEMT de Arsenieto de Gálio e implementado em tecnologia MMIC. O protótipo produzido foi caracterizado na fábrica, ainda na bolacha em que foi produzido (on-wafer) tendo sido obtidos dados de caracterização de 80 circuitos protótipo. Estes foram comparados com resultados de simulação e com desempenho do protótipo montado num veículo de teste. O capítulo 3 apresenta o projecto de dois compensadores eléctricos ajustáveis com a capacidade de mitigar os efeitos da dispersão cromática e da dispersão de polarização em sistemas ópticos com débito binário de 10Gb/s e 40Gb/s, com modulação em banda lateral dupla e banda lateral única. Duas topologias possíveis para este tipo de compensadores (a topologia Feed-Forward Equalizer e a topologia Decision Feedback Equaliser) são apresentadas e comparadas. A topologia Feed-Forward Equaliser que serviu de base para a implementação dos compensadores apresentados é analisada com mais detalhe sendo propostas alterações que permitem a sua implementação prática. O capítulo apresenta em detalhe a forma como estes compensadores foram implementados como circuitos distribuídos em tecnologia MMIC sendo propostas duas formas de implementar as células de ganho variável: com recurso à configuração cascode ou com recurso à configuração célula de Gilbert. São ainda apresentados resultados de simulação e experimentais (dos protótipos produzidos) que permitem tirar algumas conclusões sobre o desempenho das células de ganho com as duas configurações distintas. Por fim, o capítulo inclui ainda resultados de desempenho dos compensadores testados como compensadores de um sinal eléctrico afectado de distorção. No capítulo 4 é feita uma análise do impacto da modulação em banda lateral dupla (BLD) em comparação com a modulação em banda lateral única (BLU) num sistema óptico afectado de dispersão cromática e de polarização. Mostra-se que com modulação em BLU, como não há batimento entre portadoras das duas bandas laterais em consequência do processo quadrático de detecção e há preservação da informação da distorção cromática do canal (na fase do sinal), o uso deste tipo de modulação em sistemas de comunicação óptica permite maior tolerância à dispersão cromática e os compensadores eléctricos são muito mais eficientes. O capítulo apresenta ainda resultados de teste dos compensadores desenvolvidos em cenários experimentais de laboratório representativos de sistemas ópticos a 10Gb/s e 40Gb/s. Os resultados permitem comparar o desempenho destes cenários sem e com compensação eléctrica optimizada, para os casos de modulação em BLU e em BLD, e considerando ainda os efeitos da dispersão na velocidade de grupo e do atraso de grupo diferencial. Mostra-se que a modulação BLU em conjunto com compensação adaptativa eléctrica permite um desempenho muito superior á modulação em BLD largamente utilizada nos sistemas de comunicações actuais. Por fim o capítulo 5 sintetiza e apresenta as principais conclusões deste trabalho.<br>The present work objective is to present the study and design of receivers optimized for high speed (10Gb/s and 40Gb/s) fiber optic communication systems, with the integrated capacity of adaptive compensation of the effects of chromatic and polarizations dispersion originated in the optical channel. Chapter 1 details the scope of applicability of these receivers in modern WDM optical communication systems. This chapter also presents the main goals and contributions of this thesis. Chapter 2 describes the details of the design of a post-detection amplifier suited for 10Gb/s and 40Gb/s optical communications systems. The most adequate circuit topologies are discussed and also the criteria that dictated the choice of transimpedance configuration as well as the conditions that allow its gain, bandwidth and noise performance to be optimized. Additionally the main aspects related to the layout of the circuit resorting to Microwave Monolithic Integrated Circuit (MMIC) techniques and its impact on the circuit performance, such as the effect of components which are not part of the chip particularly the bondwire inductance. This amplifier was designed and implemented in GaAs pHEMT technology resorting to MMIC techniques. The resulting prototypes were measured on wafer and data from the performance of 80 chips was made available by the factory and compared with simulation and assembled test prototype. Chapter 3 details the design of two electrical adjustable compensators with the capability of mitigation of the effects of chromatic and polarization dispersion in 10Gb/s and 40Gb/s optical systems. Two possible topologies for this type of compensator circuits are discussed (the Feed-Forward and Decision Feedback equalizer) are presented and compared. The Feed- Forward equalizer topology is selected and analyzed further, and details on the practical implementation of such structures are discussed. The chapter shows in detail how these circuits were implemented in MMIC technology, resorting to distributed circuits and also focusing on two possibilities of designing the variable gain cells: based on the Gilbert cell or based in the Cascode. Experimental and simulation results (for the manufactured prototypes) allow drawing conclusions and comparing the performance of the two distinct possibilities for the gain cells. Finally the chapter includes test results of compensation of a signal affected of electrical distortion. Chapter 4 deals with the impact of the type of optical modulation in an optical system affected of dispersion, being of the dual side band or single-side band type. It is shown that if single side band modulation is considered, then the effects of beating between carriers from both the sub-bands due to the quadratic intensity detection process (in optical to electrical conversion) is much reduced and also such detection process allows phase preservation of the chromatic dispersion distortion from the channel. For single sideband modulation optical systems are then much more tolerant to chromatic dispersion and the electrical compensators are much more effective. The chapter also shows test results of the compensators developed, in a laboratory scenario representative of field optical systems at 10Gb/s and 40 Gb/s data rate), and these results are compared considering: the modulation format double side band or single side band, and also the effects of the group velocity dispersion and the differential group delay. Single-side band modulation together with adaptive electrical compensation was shown to have much superior performance than double side-band modulation, allowing for increased tolerance to dispersion effects. Finally, chapter 5 summarizes and presents the main conclusions of this work.
APA, Harvard, Vancouver, ISO, and other styles
49

Garcia, José Emanuel Ramos Pereira. "Cobertura Celular para Sistemas de Banda Larga." Master's thesis, Universidade de Aveiro, 2002. http://hdl.handle.net/10773/22798.

Full text
Abstract:
Mestrado em Engenharia Electrónica e Telecomunicações<br>Este trabalho enquadra-se no âmbito da propagação das ondas electromagnéticas na banda de frequências das ondas milimétricas e da cobertura celular, em ambientes interiores e exteriores, para sistemas de banda larga. Primeiramente são abordados os mecanismos de propagação de ondas electromagnéticas destacando-se os mais relevantes para a banda das ondas milimétricas. Neste estudo, apresentam-se os modelos de propagação mais comuns no planeamento de sistemas de comunicações móveis, concluindo-se que os modelos determinísticos em que as propriedades electromagnéticas e a geometria do cenário, assim como as configurações de antenas assumem uma maior importância, são os mais apropriados ao planeamento de sistemas celulares de banda larga. Abordam-se ainda os efeitos climatéricos na propagação das ondas electromagnéticas, identificando-se os mais susceptíveis de degradar o desempenho do sistema e que, portanto, deverão ser considerados na fase de planeamento. A degradação do desempenho do sistema é avaliada para um caso particular, recorrendo a estatísticas meteorológicas de longo prazo recolhidas na cidade de Aveiro. Ainda no âmbito da propagação das ondas electromagnéticas, definem-se as grandezas e os conceitos físicos utilizados na caracterização da resposta impulsiva do canal (RI), os quais serão utilizados extensivamente durante os estudos de cobertura celular. O estudo da cobertura celular centra-se na definição das configurações de antenas e dos arranjos celulares mais adequados à cobertura de um dado cenário, tanto a nível da distribuição de potência como na dispersão temporal do canal. As configurações propostas são avaliadas recorrendo a simulações e medições experimentais realizadas com um demonstrador de comunicações móveis de banda larga em alguns dos cenários estudados. Estes dados experimentais permitem igualmente avaliar o desempenho do demonstrador em possíveis cenários de aplicação de sistemas desta natureza. Para um cenário interior de grandes dimensões, realiza-se também o estudo da RI do canal rádio-móvel na banda das ondas milimétricas, com base em simulações e medições experimentais. Após o processamento dos dados experimentais são obtidos diversos parâmetros relativos à RI do canal, para diferentes condições de propagação. Estes parâmetros são posteriormente comparados com os parâmetros obtidos por simulação e utilizados para identificar a configuração de antenas mais adequada ao cenário em causa. Finalmente realiza-se o estudo da geração das portadoras milimétricas, da modulação da informação a transmitir e da sua distribuição através de uma rede de suporte em sistemas celulares de banda larga. Neste estudo recorre-se a tecnologia óptica em alternativa às tecnologias electrónicas mais convencionais por forma a reduzir os custos e a complexidade inerente à sua natureza picocelular, apresentando-se uma proposta para a estrutura da rede de suporte.<br>This work deals with the electromagnetic propagation in the millimetre-wave band and with cellular coverage, in outdoor and indoor environments for wide band systems. First the electromagnetic propagation mechanisms will be studied, pointing out the most relevant ones in the millimetre-wave band. The most common propagation models for planing mobile systems are presented, concluding that the deterministic models, where the electromagnetic properties and the geometry of the scenario, as well as the antenna configurations, assume a more significant importance are the most adequate for planing wide band cellular systems. Further, the climatic effects in the propagation of electromagnetic waves are studied, identifying the most susceptible of degrading the system’s performance and therefore, which should be considered in the system’s planing stage. The degradation of the system’s performance is evaluated for a particular case, using long term meteorological statistics collected in Aveiro city. Still in the study of electromagnetic waves propagation, the physical entities and concepts used in the characterisation of the channel impulse response, which will be extensively used during the cellular coverage study, are defined. Cellular coverage studies focus on the definition of the antenna configurations and cellular layouts more adequate to the coverage of a particular scenario, both from the power distribution and channel time dispersion point of view. The antenna and cellular configurations proposed are evaluated using experimental measurements carried out in some of the studied scenarios. These experimental data allows also to evaluate the performance of the wide band mobile communications demonstrator, used in the measurement campaign, in possible application scenarios for this kind of systems. For a large indoor scenario, the millimetre wave channel impulse response is also studied, based on simulations and experimental measurement. After processing the experimental data, several channel impulse response parameters are obtained, for different propagation conditions. These parameters are afterwards compared with the ones obtained by simulation and used to assess the most suited antenna configuration for the considered scenario. Finally, the generation of millimetre wave carriers, the modulation of the information to transmit and its distribution in a backbone network for wide band cellular systems is studied. In this study, optical technology is used as an alternative to more conventional electronic technologies, in order to reduce the costs and the complexity inherent to its pico-cellular nature. A proposal for a cellular mobile broadband backbone network is presented.
APA, Harvard, Vancouver, ISO, and other styles
50

Navarrete, Moreno Francisco José. "Caracterización de Transistores Hemt en Banda Q." Tesis, Universidad de Chile, 2011. http://www.repositorio.uchile.cl/handle/2250/104301.

Full text
Abstract:
Este trabajo de título tiene como objetivo diseñar y construir un sistema de caracterización de transistores HEMT. Este sistema tiene como n determinar el comportamiento de transistores candidatos a ser utilizados en el diseño de ampli cadores de bajo ruido para receptores de antenas radioastronomicas que operen en Banda 1 del proyecto ALMA. Como parte de este sistema se diseñaron y construyeron dos módulos, un módulo Bias Tee y un sistema de calibración TRL. El módulo Bias Tee permite acoplar, por un mismo canal, la señal proveniente del VNA y la polarización para entregarlas al transistor. El módulo de calibración TRL permite descontar de la medicion de parámetros S del transistor, el efecto del resto de los elementos que forman el sistema de caracterización. Además, se desarrolló un software que a partir de los datos obtenidos del transistor calcula sus parámetros S. Al realizar las mediciones del módulo Bias Tee y del sistema de calibración, estas diferían del comportamiento que mostraban las simulaciones. En el caso del Bias Tee se encontró que la mayor parte de la señal incidente en el módulo se refleja. En el caso del sistema de calibración, se genera una calibración exitosa pero altamente sensible a las modi caciones en el montaje, lo que no permite obtener una calibración estable para medir el transistor. Al analizar los problemas descritos, se identi có que el elemento común en ambos módulos son los conectores 2.4 mm que se utilizan a la entrada y salida de ambos módulos. Se encontró que el montaje de estos conectores no es el más idóneo. Como alternativa, se estudia un diseño alternativo llamado montaje de adaptación. Las simulaciones indican que las reflexiones son menores a -20 dB, lo que representa mejores resultados que el montaje simple. En conclusión, este trabajo ha permitido identi car problemas no previstos en la caracterización del transistor de prueba. Se espera que al cambiar el método de montaje de los conectores 2.4 mm el sistema diseñado funcione correctamente.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!