Books on the topic 'Ball Bearing'

Harris, Tedric A. Rolling bearing analysis. 4th ed. New York: John Wiley, 2001.

Society of Tribologists and Lubrication Engineers. Technical Committee on Bearings and Bearing Lubrication. Interpreting service damage in rolling type bearings: A manual on ball & roller bearing damage. Park Ridge, Ill: American Society of Tribologists and Lubrication Engineers, 1993.

N, Kotzalas Michael, ed. Advanced concepts of bearing technology. Boca Raton, Fla: Taylor & Francis, 2007.

Harris, Tedric A. Rolling bearing analysis. 3rd ed. New York: Wiley, 1991.

N, Kotzalas Michael, ed. Rolling bearing analysis. 5th ed. Boca Raton, FL: CRC/Taylor & Francis, 2007.

Schuller, Fredrick T. Effect of two inner-ring oil-flow distribution schemes on the operating characteristics of a 35-millimeter-bore ball bearing to 2.5 million DN. Washington, D.C: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

Schuller, Fredrick T. Effect of two inner-ring oil-flow distribution schemes on the operating characteristics of a 35-millimeter-bore ball bearing to 2.5 million DN. Washington, D.C: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

Schuller, Fredrick T. Effect of two inner-ring oil-flow distribution schemes on the operating characteristics of a 35-millimeter-bore ball bearing to 2.5 million DN. Washington, D.C: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

Schuller, Fredrick T. Effect of two inner-ring oil-flow distribution schemes on the operating characteristics of a 35-millimeter-bore ball bearing to 2.5 million DN. Washington, D.C: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

Schuller, Fredrick T. Effect of two inner-ring oil-flow distribution schemes on the operating characteristics of a 35-millimeter-bore ball bearing to 2.5 million DN. Washington, D.C: National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

Fleming, David P. Transient vibration prediction for rotors on ball bearings using load-dependent non-linear bearing stiffness. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2002.

Zaretsky, Erwin V. A. palmgren revisited--a basis for bearing life prediction. [Washington, DC]: National Aeronautics and Space Administration, 1997.

Zaretsky, Erwin V. A. palmgren revisited--a basis for bearing life prediction. [Washington, DC]: National Aeronautics and Space Administration, 1997.

Zaretsky, Erwin V. A. palmgren revisited--a basis for bearing life prediction. [Washington, DC]: National Aeronautics and Space Administration, 1997.

Zaretsky, Erwin V. A. palmgren revisited--a basis for bearing life prediction. [Washington, DC]: National Aeronautics and Space Administration, 1997.

Zaretsky, Erwin V. Effect of hoop stress on ball bearing life prediction. [Washington, D.C.]: National Aeronautics and Space Administration, 1995.

Friedman, Sy. I.B.I., International Bearing Interchange guide: World's most complete history of bearing number alternatives : a computerized interchange of anti-friction ball and roller bearings for ground and other equipment. 9th ed. St. Louis Park, MN, U.S.A: Interchange, 1986.

Friedman, Sy. I.B.I., International Bearing Interchange guide: World's most complete history of bearing number alternatives : a computerized interchange of anti-friction ball and roller bearings for ground and other equipment. 9th ed. St. Louis Park, MN, U.S.A: Interchange, 1986.

M, Greenhill Lyn, and United States. National Aeronautics and Space Administration., eds. Modelling of rolling element bearing mechanics: Theoretical manual. Sacramento, CA: GenCorp Aerojet, 1994.

National Institute for Occupational Safety and Health. New Hampshire Ball Bearing [sic], Astro Division, Laconia, New Hampshire. [Atlanta, Ga.?]: U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 1996.

T, Schuller Fredrick, and United States. National Aeronautics and Space Administration., eds. Lubrication of an 85-mm ball bearing with RP-1. [Washington, DC]: National Aeronautics and Space Administration, 1993.

Morales, Wilfredo. Analysis of a spacecraft instrument ball bearing assembly lubricated by a perfluoroalkylether. [Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1986.

Jett, Timothy Raymond. Evaluation of bearing configurations using the single bearing tester in liquid nitrogen. Marshall Space Flight Center, AL: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1991.

Jett, Timothy Raymond. Evaluation of bearing configurations using the single bearing tester in liquid nitrogen. Marshall Space Flight Center, AL: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1991.

Sylvain, David C. New Hampshire Ball Bearing, Astro Division, Laconia, New Hampshire August 1996. Cincinnati, Ohio: NIOSH, 1996.

P, Rusavskiĭ I͡U. Tekhnologii͡a proizvodstva sharikovykh peredach vint--gaĭka kachenii͡a. Moskva: "Mashinostroenie", 1985.

V, Poplawski J., Miller C. R, and NASA Glenn Research Center, eds. Rolling bearing life prediction-past, present, and future. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2000.

R, Jones William. Long term performance of a retainerless bearing cartridge with an oozing flow lubricator for spacecraft applications. [Washington, DC]: National Aeronautics and Space Administration, 1997.

R, Jones William. Long term performance of a retainerless bearing cartridge with an oozing flow lubricator for spacecraft applications. [Washington, DC]: National Aeronautics and Space Administration, 1997.

Gregory, Sawyer W., and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. Demonstration of the feasibility of high temperature bearing lubrication from carbonaceous gases: Under contract NAS3-25950. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1996.

National Register of Foreign Collaborations (India) and India. Dept. of Scientific & Industrial Research., eds. Technology in Indian ball and roller bearing industry: A status report prepared under the National Register of Foreign Collaborations. New Delhi: Govt. of India, Dept. of Scientific and Industrial Research, Ministry of Science and Technology, 1990.

Dawud, Sattar Jabar. Analysis of the tribological behaviour of stainless and ball bearing steels sliding in the presence of sulphur extreme-pressure additives. Birmingham: University of Aston. Department of Mathematics and Physics, 1985.

United States. Congress. Senate. Committee on Small Business. Problems confronting the domestic ball-and roller-bearing industry: Hearing before the committee on Small Business, United States Senate, One Hundredth Congress, second session ... September 8, 1988. Washington: U.S. G.P.O., 1988.

Rascher, Rolf. Experimentelle Untersuchungen zur Technologie der Kugelherstellung. Berlin: Springer-Verlag, 1989.

Büchs, Hubert. Analytische Untersuchungen zur Technologie der Kugelbearbeitung. Berlin: Springer-Verlag, 1986.

United States International Trade Commission. Ball bearings, mounted or unmounted, and parts thereof, from Argentina, Austria, Brazil, Canada, Hong Kong, Hungary, Mexico, the People's Republic of China, Poland, the Republic of Korea, Spain, Taiwan, Turkey and Yugoslavia: Determination of the Commission in investigation no. 701-TA-307 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation : determinations of the Commission in investigations nos. 731-TA-498-511 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigations. Washington, DC: U.S. International Trade Commission, 1991.

Changsen, Wan. Analysis of rolling element bearings. London: Mechanical Engineering Publications, 1991.

Albert, M. Wälzlager: Theorie und Praxis. Wien: Springer-Verlag, 1987.

Eschmann, P. Ball and roller bearings: Theory, design, and application. 2nd ed. München: Oldenbourg, 1985.

M, Barnsby Roger, and American Society of Mechanical Engineers. Tribology Division. Technical Committee., eds. Life ratings for modern rolling bearings: A design guide for the application of international standard ISO 281/2. New York: ASME International, 2003.

V, Zaretsky Erwin, and Society of Tribologists and Lubrication Engineers., eds. STLE life factors for rolling bearings. Park Ridge, IL (840 Busse Hwy., Park Ridge 60068): Society of Tribologists and Lubrication Engineers, 1992.

United States International Trade Commission. Antifriction bearings (other than tapered roller bearings) and parts thereof from the Federal Republic of Germany, France, Italy, Japan, Romania, Singapore, Sweden, Thailand, and the United Kingdom: Determinations of the Commission in investigations nos. 303-TA-19 and 20 (final) under the Tariff Act of 1930, together with the information obtained in the investigations : determinations of the Commission in investigations nos. 731-TA-391-399 (final) under the Tariff Act of 1930, together with the information obtained in the investigations. Washington, DC: U.S. International Trade Commission, 1989.

Koshelʹ, V. M. Podshipniki kachenii͡a︡. Minsk: "Navuka i tėkhnika", 1993.

V, Chernevskiĭ L., and Naryshkin V. N, eds. Issledovanie dolgovechnosti i momentov trenii͡a︡ podshipnikov kachenii͡a︡. Moskva: Nauchno-proizvodstvennoe obʺedinenie podshipnikovoĭ promyshl., 1990.

United States International Trade Commission. Antifriction bearings (other than tapered roller bearings) and parts thereof from the Federal Republic of Germany, France, Italy, Japan, Romania, Singapore, Sweden, Thailand, and the United Kingdom: Determinations of the Commission in investigations nos. 303-TA-19 and 20 (final) under the Tariff Act of 1930, together with the information obtained in the investigations : determinations of the Commission in investigations nos. 731-TA-391-399 (final) under the Tariff Act of 1930, together with the information obtained in the investigations. Washington, DC: U.S. International Trade Commission, 1989.

Skorynin, I͡U V. Regulirovanie skorostnykh podshipnikov kachenii͡a. Minsk: "Nauka i tekhnika", 1989.

Zhuravlev, V. F. Mekhanika sharikopodshipnikov giroskopov. Moskva: "Mashinostroenie", 1986.

Institute, American National Standards. Shaft and housing fits for metric radial ball and roller bearings (except tapered roller bearings) conforming to basic boundary plans. Washington, D.C: Anti-Friction Bearing Manufacturers Association, 1988.

Cheryl, Krasner, and Business Trend Analysts Inc, eds. The Antifriction bearings industry: Past performance, current trends, and strategies for the future : a business information report. Commack, N.Y. (2171 Jericho Turnpike, Commack 11725): Business Trend Analysts, Inc., 1989.

V, Brown Gerald, Mehmed Oral, and Lewis Research Center, eds. A magnetic suspension and excitation system for spin vibration testing of turbomachinery blades. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.