Relevant bibliographies by topics / Band-stop filter

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Band-stop filter'

Author: Grafiati
Published: 4 June 2021
Last updated: 9 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Band-stop filter.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Band-stop filter"

1

Roonizi, Arman Kheirati, and Christian Jutten. "Band-Stop Smoothing Filter Design." IEEE Transactions on Signal Processing 69 (2021): 1797–810. http://dx.doi.org/10.1109/tsp.2021.3060619.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zheng, Xuemei, Tao Jiang, Hao Lu, and Yanyan Wang. "Double-Layer Microstrip Band Stop Filters Etching Periodic Ring Electromagnetic Band Gap Structures." Electronics 9, no. 8 (2020): 1216. http://dx.doi.org/10.3390/electronics9081216.

Full text
Abstract:
The electromagnetic band gap structure (EBGs) is widely used in microwave engineering, such as amplifiers, waveguides, microstrip filters, due to the fact of its excellent band stop characteristics. In this paper, three kinds of microstrip band stop filters were proposed which were etched with a hexagonal ring EBGs, octagonal ring EBGs and elliptical ring EBGs. Firstly, the etching coefficient of a band stop filter is proposed, and the performance of filters with different etching coefficient was analyzed. Secondly, the equivalent circuit of an EBGs band stop filter is proposed. By comparing the simulation results using advanced design system (ADS) and high frequency structure simulator (HFSS), it was found that the simulation results had the same −10 dB stopband width which verifies the correctness of the equivalent circuit model. Finally, three kinds of microstrip stopband filters were fabricated and measured. The experimental results of the −10 dB stopband width and resonant frequency were in good agreement with the simulation results. The −10 dB stopband fractional bandwidth of the three kinds of microstrip stopband filters was more than 63%. The proposed microstrip band stop filters can be widely used in microwave devices with a wide stopband.
APA, Harvard, Vancouver, ISO, and other styles
3

Patel, Amit, and Y. P. Kosta. "Multiple-band waveguide based band-stop filter." International Journal of Applied Electromagnetics and Mechanics 47, no. 2 (2015): 563–81. http://dx.doi.org/10.3233/jae-130158.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tran, Minh Tri, Nene Kushita, Anna Kuwana, and Haruo Kobayashi. "Pass-Band Gain Improvement Technique for Passive RC Polyphase Filter in Bluetooth Low-IF Receiver Using Two RC Band-Stop Filters." Advanced Engineering Forum 38 (November 2020): 192–205. http://dx.doi.org/10.4028/www.scientific.net/aef.38.192.

Full text
Abstract:
This paper proposes a method to design a flat pass-band gain with two RC band-stop filters for a 4-stage passive RC polyphase filter in a Bluetooth receiver. Based on the superposition principle, the transfer function of the poplyphase filter is derived. However, the pass-band gain of this filter is not flat on the positive frequency domain. There are two local maximum values when the input signals are the wanted signals. Therefore, two RC band-stop filters are used to improve the pass-band gain of these local maximum values. As a result, a flat pass-band gain passive RC poly-phase filter is designed for a Bluetooth low-IF receiver which image rejection ratio is-36dB, and ripple gain is 0.47dB.
APA, Harvard, Vancouver, ISO, and other styles
5

Xue, Bing, and Yicai Ji. "Compact Wide Stop-Band Dual-Mode Filter with Four Transmission Zeros." International Journal of Computer and Electrical Engineering 8, no. 3 (2016): 234–40. http://dx.doi.org/10.17706/ijcee.2016.8.3.234-240.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Packiaraj, D., M. Ramesh, and A. T. Kalghatgi. "Ultra wide band filter with wide stop band." Microwave and Optical Technology Letters 49, no. 2 (2006): 436–39. http://dx.doi.org/10.1002/mop.22166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chernobrovkin, R. E., I. V. Ivanchenko, A. M. Korolev, N. A. Popenko, and K. Yu Sirenko. "The Novel Microwave Stop-Band Filter." Active and Passive Electronic Components 2008 (2008): 1–5. http://dx.doi.org/10.1155/2008/745368.

Full text
Abstract:
The stop-band filter with the new band-rejection element is proposed. The element is a coaxial waveguide with the slot in the centre conductor. In the frame of this research, the numerical and experimental investigations of the amplitude-frequency characteristics of the filter are carried out. It is noted that according to the slot parameters the two typical resonances (half-wave and quarter-wave) can be excited. The rejection band of the single element is defined by the width, depth, and dielectric filling of the slot. Fifth-order Chebyshev filter utilizing the aforementioned element is also synthesized, manufactured, and tested. The measured and simulated results are in good agreement. The experimental filter prototype exhibits the rejection band 0.86 GHz at the level −40 dB.
APA, Harvard, Vancouver, ISO, and other styles
8

Zhou, Yue, Xiao Xiao Yao, Jin Xiang Pian, and Yan Qiang Su. "Band-Stop Filter Algorithm Research Based on Nano-Displacement Positioning System." Applied Mechanics and Materials 380-384 (August 2013): 697–700. http://dx.doi.org/10.4028/www.scientific.net/amm.380-384.697.

Full text
Abstract:
This paper proposed the algorithms of infinite impulse response (IIR) band-stop filter and all-pass filter to eliminate the inherent frequency for piezoelectric ceramics and improve the control precision for nanodisplacement positioning system. The IIR algorithm was composed of five steps (such as the determination of normalized frequency, filter orders and transfer functions of analog low-pass filter, analog band-stop filter and digital band-stop filter). Based on the experimental simulation results on the nanodisplacement positioning platform, the butterworth band-stop filter algorithm can achieve the requested filtering effects within 10 orders .
APA, Harvard, Vancouver, ISO, and other styles
9

Hruschka, Crassen, Udo Barabas, and Lutz Gohler. "Optical narrow band filter without resonance's." Facta universitatis - series: Electronics and Energetics 17, no. 2 (2004): 209–17. http://dx.doi.org/10.2298/fuee0402209h.

Full text
Abstract:
This paper introduces an optical wave filter, which uses gratings at 45? or 135? inclined grating lines that avoid any resonance's. Therefore, many more options to form the filter shape exist. In general, the filter design can be traced to that of transversal filters (finite impulse response filter, FIR filter). Such an integrated optical wave filter is characterized by steep filter slopes and a narrow pass band (less then 01nm) combined with a high stop band attenuation (more than 40dB) and a linear phase response in the pass band. Compared to conventional Bragg grating filters, the inclined grating line filters can have a flatter pass band and steeper filter skirts related to the width of the pass band. In general, the filter's realization is possible using any optical material. In view of the excellent optical properties the semiconductor material system InP/InGaAsP is used for manufacturing the filter.
APA, Harvard, Vancouver, ISO, and other styles
10

Adhikari, Kishor Kumar, and Nam-Young Kim. "Microstrip Triband Bandstop Fitler with Sharp Stop Band Skirts and Independently Controllable Second Stop Band Response." Scientific World Journal 2014 (2014): 1–9. http://dx.doi.org/10.1155/2014/760838.

Full text
Abstract:
This paper presents a compact planar triband bandstop filter (TBBSF) with compact size and high selectivity. The structure of the filter incorporates two folded trisection stepped-impedance resonators (TSSIRs). One of these resonators is designed to operate at the first and third center frequencies and the other resonator is designed to operate at the second center frequency of the proposed filter. To achieve a compact size filter, alternating impedance lines of the resonators are folded widthwise and also one resonator is embedded within another. Theoretical analysis and design procedures are described, including the synthesis equations for each resonator. The main advantage of the proposed method is that the filter provides flexibility to tune the second center frequency and control the corresponding bandwidth without changing the first and third stop band response. Additionally, several reflection zeros (RZs) are introduced in the pass band to improve its flatness. To demonstrate the feasibility of the proposed design method, both the first and second order TBBSFs were designed, simulated, and fabricated, with center frequencies of 1.92 GHz, 3.55 GHz, and 5.5 GHz.
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Band-stop filter"

1

Rosler, Lucas Owen. "Design and Analysis of an FPGA Based Low Tap Band-stop FIR Filter." Youngstown State University / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1619798270047225.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ramadugu, Jaya Chandra. "Design of Microwave Band Stop and Band Pass Filters Based on BST Thin Film Varactor Technology." University of Dayton / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1386695003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

U-yen, Kongpop. "Microwave filters with high stop-band performance and low-loss hybrid developement." Diss., Available online, Georgia Institute of Technology, 2006, 2006. http://etd.gatech.edu/theses/available/etd-11162006-111102/.

Full text
Abstract:
Thesis (Ph. D.)--Electrical and Computer Engineering, Georgia Institute of Technology, 2007.<br>Tentzeris, Manos, Committee Member ; Wollack, Edward, Committee Member ; Cressler, John, Committee Member ; Papapolymerou, Ioannis, Committee Chair ; Laskar, Joy, Committee Co-Chair ; Ayazi, Farrokh, Committee Member.
APA, Harvard, Vancouver, ISO, and other styles
4

Mohammadi, Laya. "Tunable Filters and Interference Rejection System for Interferer Suppression at RF and Microwave Bands." Diss., Virginia Tech, 2017. http://hdl.handle.net/10919/84427.

Full text
Abstract:
Contemporary wireless systems have advanced toward smart and multifunctional radios such as software-defined or cognitive radios which access a wideband or multiband spectrum dynamically. It is desirable for the wireless systems to have high frequency selectivity early in the receiver chain at RF to relax the dynamic range requirements of subsequent stages. However, integration of high selectivity RF band-pass filters (BPF), or band-stop filters (BSF) is challenging because of limited quality factor (Q) of passive components in integrated circuit (IC) technology [1]. This proposed research achieves the followings: 1. Developing, and demonstrating innovative integrated band-pass filter that relaxes the performance tradeoffs in conventional LC filters to maximally increase filter reconfigurability in frequency tuning range (2-18 GHz), selectivity (Q=5~100) with superior dynamic range (DR>100 dB) at RF to microwave frequency range [2]. 2. Implementing active notch filter system comprised of a Q-enhancement band-pass filter (BPF) and an all-pass amplifier. The notch response is synthesized by subtracting the BPF output from the all-pass output. In the proposed synthetic notch filters, the BPF is responsible for defining selectivity while stop-band attenuation is primarily dependent on the gain matching between the BPF and all-pass amplifier. Therefore, notch attenuation is controllable independently from the bandwidth tuning, providing more operational flexibility. Further, the filter dynamic range is optimized in the all-pass amplifier independently from the selectivity control in the BPF, resolving entrenched tradeoff between selectivity and dynamic range in active filters [3]. 3. Demonstrating the mode reconfigurable LC filter that works in either BPF or BSF for a flexible blocker filtering adaptive to the dynamic blocker environments. 4. Implementing a novel feedback-based interference rejection system to improving the linearity of the BPF for high Q cases, in which the BPF Q is set to a specific value and further increase in Q is achieved using feedback gain. And finally, the second LC tank is added to increase the out of band rejection in band-pass characteristics.<br>Ph. D.
APA, Harvard, Vancouver, ISO, and other styles
5

Zargarzadeh, MohammadReza. "Filter Design for Interference Cancellation for Wide and Narrow Band RF Systems." Thesis, Virginia Tech, 2016. http://hdl.handle.net/10919/81132.

Full text
Abstract:
In radio frequency (RF), filtering is an essential part of RF transceivers. They are employed for different purposes of band selection, channel selection, interference cancellation, image rejection, etc. These are all translated in selecting the wanted signal while mitigating the rest. This can be performed by either selecting the desired frequency range by a band pass filter or rejecting the unwanted part by a band stop filter. Although there has been tremendous effort to design RF tunable filters, there is still lack of designs with frequency and bandwidth software-tuning capability at frequencies above 4 GHz. This prevents the implementation of Software Defined Radios (SDR) where software tuning is a critical part in supporting multiple standards and frequency bands. Designing a tunable integrated filter will not only assist in realization of SDR, but it also causes an enormous shrinkage in the size of the circuit by replacing the current bulky off-chip filters. The main purpose of this research is to design integrated band pass and band stop filters aimed to perform interference cancellation. In order to do so, two systems are proposed for this thesis. The first system is a band pass filter capable of frequency and band with tuning for C band frequency range (4-8 GHz) and is implemented in 0.13 µm BiCMOS technology. Frequency tunability is accomplished by using a variable capacitor (varactor) and bandwidth tuning is carried out by employing a negative transconductance cell to compensate for the loss of the elements. Additional circuitry is added to the band pass filter to enhance the selectivity of the filter. The second system is a band stop filter (notch) with the same capability as the band pass filter in terms of tuning. This system is implemented in C band, similar to its band stop counterpart and is capable of tuning its depth by using a negative transconductance in an LC tank. A negative feedback is added to the circuit to improve the bandwidth. While implemented in the same process as the band pass filter, it only employs CMOS transistors since it is generally more attractive due to its lower cost and scalability. Both of the systems mentioned use a varactor for changing the center frequency which is a nonlinear element. Therefore, the nonlinearity of it is modelled using two different methods of nonlinear feedback and Volterra series in order to gain further understanding of the nonlinear process taking place in the LC tank. After the validation of the models proposed using Cadence Virtuoso simulator, two methods of design and tuning are suggested to improve the linearity of the system. After post layout-extraction, the band pass filter is capable of Q tuning in the range of 3 to 270 and higher. With the noise figure of 10 to 14 dB and input 1-dB compression point as high as 2 dBm, the system shows a reasonably good performance along its operating frequency of 4 to 8 GHz. The band stop filter which is designed in the same frequency band can achieve better than 55 dB of rejection with the noise figure of 6.7 to 8.8 dB and 1-dB compression point of -4 dBm. With the power consumption of 39 to 70 mW, the band stop filter can be used in a low power receiver to suppress unwanted signals. The technique used in the band stop filter can be applied to higher frequency ranges if the circuit is implemented in a more advanced silicon technology. Implementing the mentioned filters in a receiver along with other elements of low noise amplifiers, mixers, etc. would be a major step toward full implementation of SDR systems. Studying the linearity theory of varactors would help future designers identify the sources of nonlinearity and suggest more efficient tuning techniques to improve the linearity of RF electronic systems.<br>Master of Science
APA, Harvard, Vancouver, ISO, and other styles
6

Deville, Yannick. "Filtres actifs RC hyperfréquences intégrés sur arséniure de gallium." Grenoble 1, 1989. http://www.theses.fr/1989GRE10015.

Full text
Abstract:
Les filtres etudies sont en grande partie des filtres d'ordre 2: filtres passe-bande a forte selectivite, filtre coupe-bande, filtres passe-tout. Ces filtres passe-tout ont ete utilises pour realiser des dephaseurs 90**(o) large bande
APA, Harvard, Vancouver, ISO, and other styles
7

Třeček, Stanislav. "Aktivní elektrické filtry na bázi obvodů se spínanými kapacitory." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217796.

Full text
Abstract:
This thesis deals with concept of universal frequency filter by application of a switched-capacitor functional block. The concept is based on the theory of switched-capacitor circuits and the theory of a design of classical frequency filters. The printed circuit board was designed based on the filter connection developed by using a software Eagle. The filter was implemented as a laboratory product. This product has been revitalized and the frequency response of all types of filters has been measured. The measured parameters were compared with the parameters set out in the technical documentation of functional block.
APA, Harvard, Vancouver, ISO, and other styles
8

Jašek, František. "Návrh nových aktivních filtrů pomocí grafů signálových toků." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218236.

Full text
Abstract:
This master’s thesis describes the design of the frequency filters by the help of the graph of the signal flows. There are defined by modern components like GVC (Generalized Voltage Conveyor), GCC (Generalized Current Conveyor), CF (Current Follower), DO-CF (Dual-Output Current Follower), OTA (Operational Transconductance Amplifier), BOTA (Ballanced Operational Transconductance Amplifier) and CFTA (Current Follower Transconductance Amplifier), the graphs of the signal flows, which describe their activity in the thesis. In the other part of the thesis is illustrated the procedure of the design of the frequency filters by the help of the graphs of the signal flows. For the concrete design was selected in the first case as the active component double output current follower and in the second case the CFTA. There are noted all designed circuits of the frequency filters also their characteristic equations in this thesis. The activity of the selected circuits was remitted to the analysis in the simulation program called PSpice. Because the active components, with which was engaged in the design of the filter which doesn’t exist in the real form, that is why the UCC, which is sufficing for attestation of the function of the circuit, was used for the simulation. The simulation was implemented in the frequency range 10 Hz to 10 MHz.
APA, Harvard, Vancouver, ISO, and other styles
9

Johnston, Samuel Robert. "Complex Filters as as a Cascade of of Buffered Gingell Structures: Design from from Band-Stop Constraints." DigitalCommons@CalPoly, 2016. https://digitalcommons.calpoly.edu/theses/1638.

Full text
Abstract:
This thesis presents an active Complex Filter implementation that that creates a transfer function with with a single real pole and a complex zero. The two-input/two-output network developed in in this thesis responds differently based upon upon the relative phase difference of of the two inputs. If a negative ninety-degree phase difference occurs between the two inputs, the filter will exhibits a bandstop response. While a positive ninety-degree phase difference exhibits a bandpass response. This topology is relatesd to to Gingell’s RC-CR polyphase topology but because of of the use of of op-amps, can be cascadedd without without suffering loading effects. This thesis will focusfocuses primarily on on the bandstop response characteristics of of the filter. In a several stage cascade, each stage contributes a notch to broaden the attenuation bandWhen several sections are cascaded, multiple notches will be created from each stage that forms a broader attenuation band. Closed form design equations were were derived to to give expressions for for the “attenuation floor”. These equations can be used by a designer to predict the attenuation provided by by a cascaded system. The closed form expressions derived in in this thesis are used to implement an example five-stage topology that that operates from from 147 Hz to to 3.34 KHz. The thesis also investigates the robustness of of multi-stage cascades to to component variations. Monte Carlo analysis is used to determines the effects of of cascading the filter in in different orders, component tolerances, and a comparison to to an idealized polyphase RC-CR topology.
APA, Harvard, Vancouver, ISO, and other styles
10

Banerjee, Sourav. "Elastic Wave Propagation in Corrugated Wave Guides." Diss., Tucson, Arizona : University of Arizona, 2005. http://etd.library.arizona.edu/etd/GetFileServlet?file=file:///data1/pdf/etd/azu%5Fetd%5F1182%5F1%5Fm.pdf&type=application/pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Band-stop filter"

1

Weik, Martin H. "band-stop filter." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_1332.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dutta Roy, Suhash Chandra. "Band-Pass/Band-Stop Filter Design by Frequency Transformation." In Circuits, Systems and Signal Processing. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-6919-2_21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Becharef, Kada, Keltoum Nouri, Boubakar Seddik Bouazza, Mahdi Damou, and Tayeb Habib Chawki Bouazza. "Design of Array CSRRs Band-Stop Filter." In Artificial Intelligence in Renewable Energetic Systems. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-73192-6_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Reddy, N. Laxmi Narayan, and Bibekananda Panda. "Development of Compact Microwave CPW Band-Stop Filter Based on Sub-wavelength Metamaterial Filter." In Advances in Data Science and Management. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0978-0_56.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Devi, Ngasepam Monica, and Santanu Maity. "Design and Optimization of Band-Stop Filter Using Metamaterial Structures for K-Band Applications." In Proceedings of the International Conference on Recent Cognizance in Wireless Communication & Image Processing. Springer India, 2016. http://dx.doi.org/10.1007/978-81-322-2638-3_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Osman, P., P. V. Sridevi, and K. V. S. N. Raju. "Plasmonic Square Ring Resonator Based Band-Stop Filter Using MIM Waveguide." In Advances in Intelligent Systems and Computing. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5400-1_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tan, Lingling, Yunpeng Wang, and Guizhen Yu. "Active Band-Stop Filter Synthesis Based on Nodal Admittance Matrix Expansion." In Lecture Notes in Electrical Engineering. Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3229-5_62.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dash, Judhisthir, Rajkishore Swain, and Bivas Dam. "Design of Linear Phase Band Stop Filter Using Fusion Based DEPSO Algorithm." In Advances in Intelligent Systems and Computing. Springer India, 2015. http://dx.doi.org/10.1007/978-81-322-2734-2_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gupta, Ajay, Anil Rajput, Monika Chauhan, and Biswajeet Mukherjee. "Wideband Band-stop Filter for C-Band and S-Band Applications Using Finite Integration in Time-Domain Technique." In Advances in Intelligent Systems and Computing. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1275-9_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kulkarni, Makarand G., A. N. Cheeran, K. P. Ray, and S. S. Kakatkar. "Design of a Novel CPW Band Stop Filter Using Asymmetric Meander-Line Defected Ground Structure." In Lecture Notes on Data Engineering and Communications Technologies. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-8339-6_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Band-stop filter"

1

Sharma, Preeti, Shiban K. Koul, and Sudhir Chandra. "Micromachined Spurline Band-stop Filter." In 2007 IEEE International Workshop on Radio-Frequency Integration Technology. IEEE, 2007. http://dx.doi.org/10.1109/rfit.2007.4443943.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Bao-Xin, Qing-Yuan Wang, and Rong-Jun Liu. "A Band-Stop Filter with Far Spurious Stop Bands." In 2008 IEEE MTT-S International Microwave Workshop Series on Art of Miniaturizing RF and Microwave Passive Components (IMWS). IEEE, 2008. http://dx.doi.org/10.1109/imws.2008.4782289.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Palandoken, Merih, and Heino Henke. "Compact LHM-based band-stop filter." In 2010 10th Mediterranean Microwave Symposium (MMS 2010). IEEE, 2010. http://dx.doi.org/10.1109/mmw.2010.5605185.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Adoum, Bakhit Amine, and Peng Wen Wong. "Miniaturized multiband matched band-stop filter." In 2011 IEEE International RF and Microwave Conference (RFM). IEEE, 2011. http://dx.doi.org/10.1109/rfm.2011.6168688.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Matoug, Abdulhamid, and T. S. Kalkur. "Switchable and tunable band stop filter." In 2017 Progress In Electromagnetics Research Symposium - Spring (PIERS). IEEE, 2017. http://dx.doi.org/10.1109/piers.2017.8262127.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yohannan, J., V. Hamsakutty, A. V. P. Kumar, V. Thomas, G. Bindhu, and K. T. Mathew. "A Rectangular Dielectric Resonator Band Stop Filter." In 2006 IEEE Antennas and Propagation Society International Symposium. IEEE, 2006. http://dx.doi.org/10.1109/aps.2006.1711359.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pogarsky, S. A., A. A. Zvyagintsev, I. I. Saprykin, G. M. Petkov, V. B. Andreyev, and E. A. Shaulov. "The K/sub L/ band-stop filter." In 11th International Conference 'Microwave and Telecommunication Technology'. Conference Proceedings. IEEE, 2001. http://dx.doi.org/10.1109/crmico.2001.961644.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Peng, Yi, and Wen-Xun Zhang. "Compact microstrip band-stop filter using IDCLLR." In 2010 International Conference on Microwave and Millimeter Wave Technology (ICMMT). IEEE, 2010. http://dx.doi.org/10.1109/icmmt.2010.5525251.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hsieh, C. P., T. Chiu, and H. B. Wu. "Band-stop Filter Design of Coplanar Stripline." In 2007 Asia-Pacific Microwave Conference - (APMC 2007). IEEE, 2007. http://dx.doi.org/10.1109/apmc.2007.4554796.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pendharker, Sarang, R. K. Shevgaonkar, and A. N. Chandorkar. "Optically controlled frequency switching band stop filter." In 2012 IEEE Asia-Pacific Conference on Antennas and Propagation (APCAP). IEEE, 2012. http://dx.doi.org/10.1109/apcap.2012.6333201.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography