Log in

Relevant bibliographies by topics / Base

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Base'

Author: Grafiati

Published: 4 June 2021

Last updated: 9 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Base.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Base"

1

Tan, Choon-Hong, Bo Teng, and Wei Lim. "Recent Advances in Enantioselective Brønsted Base Organocatalytic Reactions." Synlett 28, no. 11 (May 23, 2017): 1272–77. http://dx.doi.org/10.1055/s-0036-1588847.

Full text

Abstract:

Enantioselective Brønsted base catalyzed reactions have established themselves as powerful tools for the construction of optically pure compounds. Most strategies aim at improving these reactions involve the modification of substrates to decrease the pK a of the acidic proton. Typically, an electron-withdrawing group such as an ester or a fluorine is placed at the α-carbon, where the proton is also residing. The activation of less active proton, thus, becomes a major challenge in this field of research. In order to overcome this pK a barrier, some new innovative approaches have been demonstrated in recent years. The implementation of dual activation modes and the development of organocatalytic Brønsted superbases are selected to be discussed in this minireview.1 Introduction2 Dual Activation Using Lewis Acid and Brønsted Base3 Dual Activation Using Iminium Catalyst and Brønsted Base4 Chiral Brønsted Superbase5 Chiral Ion-Pair Brønsted Base6 Summary and Outlook

APA, Harvard, Vancouver, ISO, and other styles

2

Liu, Zhi Hua, and Xiao Sun. "Coronavirus phylogeny based on Base-Base Correlation." International Journal of Bioinformatics Research and Applications 4, no. 2 (2008): 211. http://dx.doi.org/10.1504/ijbra.2008.018347.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sthefianus, Yoel, Pande Ketut Sudiarta, and Gede Sukadarmika. "Perencanaan Sistem Long Term Evolution di Wilayah Kota Denpasar Memanfaatkan Bale Banjar untuk Menempatkan Base Station." Jurnal SPEKTRUM 5, no. 2 (December 17, 2018): 81. http://dx.doi.org/10.24843/spektrum.2018.v05.i02.p11.

Full text

Abstract:

Perencanaan sistem jaringan LTE dipengaruhi oleh beberapa faktor, salah satunya adalah faktor kontur wilayah yang berbeda. Kontur permukaan wilayah berpengaruh terhadap cakupan area yang dihasilkan suatu base station. Perencanaan jaringan berdasarkan analisis perhitungan, tidak mempertimbangkan kontur wilayah, maka untuk menunjang hal tersebut diperlukan simulasi menggunakan software Atoll. Metode pada penelitian ini menggunakan perhitungan dan simulasi software Atoll. Penempatan base station memanfaatkan 385 Bale Banjar sebagai titik site menara rooftop. Penempatan ini dilakukan di Bale Banjar dikarenakan mudahnya akses perijinan tempat, seperti base station pada Bale Banjar Balun. Berdasarkan hasil perhitungan dan pemodelan simulasi jarak jangkauan antena base station dengan model propagasi Cost-231 Hatta frekuensi 1800 MHz, diperoleh jarak sebesar 1,186 km. Simulasi perencanaan sistem LTE di wilayah kota Denpasar memerlukan 55 site, terdiri dari 54 site yang memanfaatkan Bale Banjar untuk menempatkan base station dan 1 site di luar kawasan Bale Banjar, serta diperlukan pengaturan electrical tilt sebanyak 40 site untuk mengatasi permasalahan cakupan area.

APA, Harvard, Vancouver, ISO, and other styles

4

Popvassilev, Strashimir G. "Base-base paracompactness and subsets of the Sorgenfrey line." Mathematica Bohemica 137, no. 4 (2012): 395–401. http://dx.doi.org/10.21136/mb.2012.142995.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Gazal, Lubna, and Dr D. K. Kulkarni. "Seismic Performance Evaluation between Rigid Base and Isolated Base." Bonfring International Journal of Man Machine Interface 4, Special Issue (July 30, 2016): 63–67. http://dx.doi.org/10.9756/bijmmi.8158.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Clissold, Bradley D. "Trump’s Base! You Can Say That Again!! An Optimistic Deconstruction of Base Politics." Canadian Review of American Studies 52, no. 1 (April 1, 2022): 1–15. http://dx.doi.org/10.3138/cras-2021-001.

Full text

Abstract:

An expansion of a presentation given at the annual meeting of the Canadian Association for American Studies in Montreal in 2019, prior to the beginning of the COVID-19 pandemic and the 2020 US election, this paper playfully challenges the rhetorical idea of Donald Trump’s base political support (as unconditional and foundational) through Derridean-styled deconstruction, a line of critical inquiry that repeatedly keeps riffing and looping back on itself to undermine the authority and foundations of base support by playing with the homophonic significations of base/bass/ baise in an assortment of psychosexual, pop-cultural, and satirically philosophical ways.

APA, Harvard, Vancouver, ISO, and other styles

7

Nanda, Radhikesh Prasad, and Subhrasmita Majumder. "Pushover Analysis of Base Isolated RC Frame Buildings With Masonry Infills." International Journal of Geotechnical Earthquake Engineering 10, no. 2 (July 2019): 18–31. http://dx.doi.org/10.4018/ijgee.2019070102.

Full text

Abstract:

In the present article, the performance of base-isolated infilled frames is studied analytically. The seismic performances of four RC buildings, namely RC bare frame without isolator, RC bare frame with isolator, RC infilled frame without isolator, and RC infilled frame with isolator are analysed. The results show a decrease in base shear value and increase in time period due to base isolated buildings, while these parameters are reversely affected due to infills. The decrease in story drift for the base isolated buildings is in phase while considering infill. Also, it can be inferred that plastic hinge formation is greatly affected by the introduction of masonry infill. Hence, relying on base isolation without considering infills may underestimate the seismic performance.

APA, Harvard, Vancouver, ISO, and other styles

8

Ray, Kalyan Kumar, and G. Mukhopadhyay. "Structural Integrity of Spot-Welds Used for Auto-Body Fabrication." Advanced Materials Research 264-265 (June 2011): 427–32. http://dx.doi.org/10.4028/www.scientific.net/amr.264-265.427.

Full text

Abstract:

The effects of weld nugget size, base metal strength, mode of loading and pre-strain of base metal on the load bearing capacity of spot-welds have been investigated using two varieties of interstitial free steel sheets. The effect of bake hardening treatment after spot-welding of prestrained sheets has also been examined using an ultra low carbon bake hardening grade steel. The major results infer that: (i) the load bearing capacity of spot-welds increases with increasing nugget size and base metal strength, (ii) the load bearing capacity of spot-welds increases with increasing pre-strain of base metal, (iii) the remnant dislocation density around the spot-weld increases with increasing pre-strain, (iv) the strength of spot-welds on pre-strained sheets does not alter significantly after the baking treatment, but baking treatment increases the strength of pre-strained base metals, and (v) the location of failure is commonly at the interface of HAZ/base metal for tensile-shear specimens and at the HAZ for cross-tension specimens.

APA, Harvard, Vancouver, ISO, and other styles

9

Gao, Mengqiu, Bing Li, Lei Chen, and Yuegen Wang. "The Detection for Nickel Base Super Alloy Based on Ultrasonic Phased Array." International Journal of Materials, Mechanics and Manufacturing 5, no. 4 (November 2017): 241–46. http://dx.doi.org/10.18178/ijmmm.2017.5.4.327.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Cui, Xin. "Structure design of knowledge base of software enterprise based on project development." Functional materials 24, no. 2 (June 22, 2017): 005–284. http://dx.doi.org/10.15407/fm24.02.278.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Base"

1

Tane, Julien. "Query-based multicontexts for knowledge base browsing." [S.l. : s.n.], 2007. http://digbib.ubka.uni-karlsruhe.de/volltexte/1000007530.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ren, Yajun. "Dual organocatalysis for the development of Michael-initiated enantioselective organocascades." Thesis, Ecole centrale de Marseille, 2015. http://www.theses.fr/2015ECDM0005.

Full text

Abstract:

Les travaux de recherche fondamentale présentés ici sont ancrés au cœur de la chimie organique de synthèse moderne, et plus particulièrement dans le domaine de la multi-organocatalyse énantiosélective. Dans ce manuscrit, nous avons identifié deux organocascades originales et démontré la pertinence synthétique de l'une d'elle par des applications en synthèse totale de produits naturels. L’originalité de ce travail repose sur l’utilisation d’un NHC de la classe des 1,3-imidazol-2-ylidenes comme base de Brønsted ou base de Lewis organocatalytique
The basic research work presented herein is anchored at the core of modern synthetic organic chemistry, and more specifically in the field of enantioselective multi-organocatalysis. In this manuscript, we have identified two original organocascades and demonstrated the synthetic relevance of one of these through applications in total synthesis. The originality of the work lies on the use of a 1,3-imidazol-2-ylidene NHC as an organocatalytic Brønsted or Lewis base

APA, Harvard, Vancouver, ISO, and other styles

3

Rousseau, Thomas. "Modélisation multi-échelle de la modification de structure d'un alliage à base de nickel soumis à de très fortes déformations plastiques en surface." Thesis, Lyon, 2016. http://www.theses.fr/2016LYSEC016/document.

Full text

Abstract:

La compréhension des effets du grenaillage ultrasonore sur l’intégrité de surface des composants métalliques représente un enjeu industriel important. Dans le cadre de cette thèse, une modélisation physique multi-échelle de la plasticité cristalline à la DEM (Discrete Element Model) a été développée. Le grenaillage ultrasonore consiste à mettre en mouvement des billes à l’intérieur d’une enceinte par vibration de la sonotrode. Les impacts répétés sur le matériau entraînent un écrouissage en surface, l’établissement de contraintes résiduelles de compression et la formation d’une couche nanostructurée. L’objectif de cette thèse est d’obtenir une meilleure compréhension des mécanismes conduisant à ces modifications sur un alliage à base nickel. Le mouvement des billes obtenu par DEM est relié aux modifications de la microstructure sous impacts via un modèle éléments finis utilisant une loi de plasticité cristalline. Après validation de chaque étape par des mesures expérimentales, le modèle a permis d’étudier l’effet de la quantité de billes utilisées dans le procédé. Ainsi, un nombre croissant de billes induit une augmentation d’impacts en biais de faible vitesse permettant de concentrer les contraintes résiduelles de compression en extrême surface. De plus, les simulations multi-impacts utilisant une loi de plasticité cristalline ont montré que ces impacts en biais engendraient une densité totale de dislocations et un niveau de désorientations élevées pouvant expliquer la fragmentation des grains et la nanostructuration de la surface. Enfin, ces modifications de la microstructure, visibles jusqu’à 300 µm de profondeur, sont en accord avec les profils de dureté obtenus par nano-indentation et les profils de désorientation issus de l’analyse EBSD (Electron BackScatter Diffraction)
Ultrasonic shot peening is widely used to improve mechanical properties of metallic components. Mastering the effects of this surface treatment is a major industrial issue. A physical multi-scale modelling based on crystal plasticity and DEM (Discrete Element Model) was developed in this PhD thesis. This process is performed in a closed chamber where spherical balls are moved by sonotrode vibration. Thousands of impacts induce hardening, residual compressive stress and microstructure modification leading to a nanostructured layer. The aim of this work was to improve our understanding of the mechanisms occurring during this process on nickel-based alloys. Ball motion was computed by DEM and linked to microstructure modifications induced by impacts through a crystal plasticity finite element model. Experimental analyses were performed in order to validate each step of the multi-scale modelling. Then the model was applied to investigate ball quantity effects on peened surface modification. Increasing the number of balls created a larger quantity of low speed oblique impacts which concentrated the residual compressive stress near the surface. Furthermore multi-impacts performed with a crystal plasticity law showed oblique impacts enhanced dislocation storage and disorientations within grains, which could explain the nanostructuration of the peened surface. Moreover, the numerical microstructure modification, observed up to 300 µm in depth, was in agreement with hardness profiles obtained by nanoindentation and disorientation profiles measured by EBSD (Electron BackScatter Diffraction) analysis

APA, Harvard, Vancouver, ISO, and other styles

4

Léglise, Mélissa. "Amélioration des propriétés mécaniques et chimiques de superalliages base nickel et base cobalt de fonderie utilisés pour le fibrage du verre fondu à 1000°C - 1100°C." Thesis, Université de Lorraine, 2018. http://www.theses.fr/2018LORR0228.

Full text

Abstract:

Les assiettes de fibrage utilisées pour la production de fibres de verre subissent d’importantes contraintes mécaniques, chimiques et thermiques. Par conséquent, cette pièce se dégrade et doit être périodiquement remplacée. Le but de ces travaux est d’augmenter la durée de vie des assiettes de fibrage en améliorant les propriétés mécaniques et chimiques des superalliages qui les constituent. Plus précisément, l’objectif de cette thèse est, dans un premier temps, d’améliorer les alliages utilisés pour le fibrage à 1000°C, puis dans un second temps, de trouver un superalliage pouvant fibrer à 1125°C. Ces travaux ont été menés sur deux familles de superalliages : base nickel et base cobalt. Les propriétés chimiques ont été caractérisées par des essais thermogravimétriques et les propriétés mécaniques par des essais de fluage flexion 3 points. Pour l’alliage base Ni, l’influence des éléments minoritaires subis, Mn et Si, a été étudiée. Les propriétés mécaniques de cet alliage ont fait, ensuite, l’objet d’essais d’amélioration par l’addition de titane, zirconium, tantale, hafnium et de niobium. L’addition d’aluminium a été aussi expérimentée mais ayant pour but d’améliorer les propriétés chimiques de l’alliage. Enfin, des études ont été aussi menées sur l’addition de métaux nobles (Pd et Ru) et de terres rares (Y, La et Ce). Concernant les superalliages base cobalt, l’étude s’est portée sur un alliage base Co qui a antérieurement montré de bonnes propriétés générales pour une utilisation à 1125°C et non à 1000°C. Des variantes avec une teneur abaissée en tantale, sans hafnium et sans tungstène ont été étudiées. Pour clore ces travaux, l’augmentation de la teneur en nickel et un traitement thermique ont été étudiés afin d’améliorer la résistance à l’oxydation de ce second alliage
The fiberizing spinners used to produce the glass fibers undergo sizable mechanical, chemical and thermal solicitations. Therefore, this piece is degraded and must be periodically replaced. The purpose of these works is to increase the lifetime of the fiberizing spinners by improving the mechanical and chemical properties of the superalloys that constitute them. More precisely, the objective of this thesis is, in the first time, to improve the alloys used to fiberize at 1000°C, and in a second time, to find a superalloy that can fiberize at 1125°C. These works are focused on two families of superalloys: nickel-based and cobalt-based. The chemical properties are characterized by the thermogravimetry tests and the mechanical properties by 3 points flexural creep tests. For the Ni-based alloy, the influences of unwanted minority elements, Mn and Si, were studied. The mechanical properties of this alloy are subject to improvement tests by the addition titanium, zirconium, tantalum, hafnium and niobium. The aluminium addition was also experimented but with the aim of improving the chemical properties of the alloy. Finally, the studies were also driven on the addition of noble metals (Pd and Ru) and of rare earths (Y, La and Ce). Concerning the cobalt-based superalloys, the study focused on an alloy which has previously shown good general properties to be used at 1125°C and no at 1000°C. The versius with a lowered content in tantalum, without tungsten and without hafnium were studied. To close this work, the increase of nickel and a heat treatment were studied in order to improve the oxidation resistance of this second alloy

APA, Harvard, Vancouver, ISO, and other styles

5

Pennala, J. (Joni). "Cloud-based testing of 4G base station software." Master's thesis, University of Oulu, 2017. http://urn.fi/URN:NBN:fi:oulu-201706022463.

Full text

Abstract:

Executing test automation for large-scale software-intensive embedded systems requires a lot of hardware because tests must be executed for different hardware configurations. When there is not enough hardware for all kind of configurations, other solutions are developed to fill high test coverage with less hardware. Placing simulated configurations to the cloud makes the hardware usage more effective. The case company has developed a cloud-based testing service for embedded systems which are in this case 4G base stations. This study investigated how well the service fulfils the target team’s needs for testing. Testers have a different kind of requirements for cloud-based testing. Requirements were split into four categories from the qualitative data which was collected by interviewing testers of the target team. Requirement categories are test environments, test automation development, test execution and partly-simulated system under tests, more commonly known as SUTs. Four tests were implemented to the cloud with Robot Framework which is a test automation tool for developing automated tests. An empirical data showed that executing cloud-based tests is not always so fast due to long waiting times of getting a test environment from the cloud. However, when test environments were received they have initialised automatically with default settings and required testing tools. That reduces testers’ workload because locally built test environments require a lot of manual work like maintaining test environments. Beside other research questions, this study investigated fault detection capability of partly-simulated SUTs. 34 Cloud-based tests with partly-simulated SUTs were executed. 26 Tests passed and 8 tests failed. The simulator’s software caused only one failure and tested software caused other seven failures. From these statistics, we can at least say that the partly-simulated SUT can find some faults. The study also investigated a specific fault which was not found in the simulator even though it was found in the real SUT, which was a clear disadvantage.

APA, Harvard, Vancouver, ISO, and other styles

6

Mathews, Steffy Ann. "Optimization of an SDR Based Aerial Base Station." Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc1011834/.

Full text

Abstract:

Most times people are unprepared to face natural disasters resulting in chaos, increased number of deaths, etc.Emergency responders need an efficiently working communication network to get in touch with the emergency services like hospitals, police, fire and rescue as well as people who are stranded. Such a network is also the need of the hour for survivors to contact their near and dear ones. One of the major barriers of communication during an emergency is the destruction of network elements. In case the communication devices survive the calamity, odds of the network getting congested are certainly high because almost everyone will be trying to use the same network resources. An important factor when dealing with emergency situations is the calls for an immediate response and an efficient Emergency Communication Systems (ECS). Currently there is a capability gap between existing ECS solutions and what we dream of achieving. Most current solutions do not meet cost or mobility constraints. An inexpensive, portable and mobile system will fulfill this capability gap. The main purpose of this research is to optimize the altitude and received signal strength of an aerial base station to provide maximum radio coverage on the ground as well as propose the best fit radio propagation channel model to carry out the experiment for the current scenario.

APA, Harvard, Vancouver, ISO, and other styles

7

Reed, Alan. "Site-Based Management, Knowledge Base of Kentucky Superintendents." TopSCHOLAR®, 1990. http://digitalcommons.wku.edu/theses/1990.

Full text

Abstract:

Recent educational literature has stressed the benefits of site-based management as a valuable tool in school reorganization. Following a recent ruling of the state Supreme Court and legislative mandate for implementation of site-based management, a survey was designed for the purpose of ascertaining the knowledge base among superintendents of the Commonwealth of Kentucky on the topic “site-based management” The data revealed that while there was considerable interest in site-based management among superintendents, there was also considerable confusion on the topic. Superintendents were largely unaware of a rather large body of research which clearly demonstrated the merits of participatory management in business and industry, and more recently site-based management in United States schools. Furthermore, the data revealed the existence of role ambiguity, resistance of role ambiguity, resistance to immediate implementation of site-based management, doubt over the longevity of site-based management, and nearly universal desire for training in site based-management for the respondents and their staff members. A number of recommendations were cited including the call for the superintendents to familiarize themselves with the abundant literature, standardization of terminology and immediate implementation of intensive training programs in site-based management for superintendents and others.

APA, Harvard, Vancouver, ISO, and other styles

8

Rahman, Md Rashedur. "Knowledge Base Population based on Entity Graph Analysis." Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLS092/document.

Full text

Abstract:

Le peuplement de base de connaissance (KBP) est une tâche importante qui présente de nombreux défis pour le traitement automatique des langues. L'objectif de cette tâche est d'extraire des connaissances de textes et de les structurer afin de compléter une base de connaissances. Nous nous sommes intéressés à la reconnaissance de relations entre entités. L'extraction de relations (RE) entre une paire de mentions d'entités est une tâche difficile en particulier pour les relations en domaine ouvert. Généralement, ces relations sont extraites en fonction des informations lexicales et syntaxiques au niveau de la phrase. Cependant, l'exploitation d'informations globales sur les entités n'a pas encore été explorée. Nous proposons d'extraire un graphe d'entités du corpus global et de calculer des caractéristiques sur ce graphe afin de capturer des indices des relations entre paires d'entités. Pour évaluer la pertinence des fonctionnalités proposées, nous les avons testées sur une tâche de validation de relation dont le but est de décider l'exactitude de relations extraites par différents systèmes. Les résultats expérimentaux montrent que les caractéristiques proposées conduisent à améliorer les résultats de l'état de l'art
Knowledge Base Population (KBP) is an important and challenging task specially when it has to be done automatically. The objective of KBP task is to make a collection of facts of the world. A Knowledge Base (KB) contains different entities, relationships among them and various properties of the entities. Relation extraction (RE) between a pair of entity mentions from text plays a vital role in KBP task. RE is also a challenging task specially for open domain relations. Generally, relations are extracted based on the lexical and syntactical information at the sentence level. However, global information about known entities has not been explored yet for RE task. We propose to extract a graph of entities from the overall corpus and to compute features on this graph that are able to capture some evidence of holding relationships between a pair of entities. In order to evaluate the relevance of the proposed features, we tested them on a task of relation validation which examines the correctness of relations that are extracted by different RE systems. Experimental results show that the proposed features lead to outperforming the state-of-the-art system

APA, Harvard, Vancouver, ISO, and other styles

9

NAVA, GABRIELE. "Instantaneous Momentum-Based Control of Floating Base Systems." Doctoral thesis, Università degli studi di Genova, 2020. http://hdl.handle.net/11567/1004907.

Full text

Abstract:

In the last two decades a growing number of robotic applications such as autonomous drones, wheeled robots and industrial manipulators started to be employed in several human environments. However, these machines often possess limited locomotion and/or manipulation capabilities, thus reducing the number of achievable tasks and increasing the complexity of robot-environment interaction. Augmenting robots locomotion and manipulation abilities is a fundamental research topic, with a view to enhance robots participation in complex tasks involving safe interaction and cooperation with humans. To this purpose, humanoid robots, aerial manipulators and the novel design of flying humanoid robots are among the most promising platforms researchers are studying in the attempt to remove the existing technological barriers. These robots are often modeled as floating base systems, and have lost the assumption -- typical of fixed base robots -- of having one link always attached to the ground. From the robot control side, contact forces regulation revealed to be fundamental for the execution of interaction tasks. Contact forces can be influenced by directly controlling the robot's momentum rate of change, and this fact gives rise to several momentum-based control strategies. Nevertheless, effective design of force and torque controllers still remains a complex challenge. The variability of sensor load during interaction, the inaccuracy of the force/torque sensing technology and the inherent nonlinearities of robot models are only a few complexities impairing efficient robot force control. This research project focuses on the design of balancing and flight controllers for floating base robots interacting with the surrounding environment. More specifically, the research is built upon the state-of-the-art of momentum-based controllers and applied to three robotic platforms: the humanoid robot iCub, the aerial manipulator OTHex and the jet-powered humanoid robot iRonCub. The project enforces the existing literature with both theoretical and experimental results, aimed at achieving high robot performances and improved stability and robustness, in presence of different physical robot-environment interactions.

APA, Harvard, Vancouver, ISO, and other styles

10

Böris, Elin, and Vendela Hall. "Developing a Methodology for Supplier Base Reduction : A Case Study at Dynapac GmbH." Thesis, Linköpings universitet, Institutionen för ekonomisk och industriell utveckling, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-119334.

Full text

Abstract:

Dynapac GmbH is a manufacturer of road construction equipment and has historically been acquired and merged with several companies, resulting in an expansion of their supplier base. Currently, they are experiencing a large supplier base within direct material causing a decrease in the effectiveness and efficiency in the management of the suppliers. Dynapac GmbH therefore wishes to lower the number of suppliers in order to obtain desired effects, such as cost savings, reduction of administrative workload, higher control, higher quality and improved communication with suppliers. The purpose of the study is therefore to develop a methodology that describes all the activities needed to successfully reduce the number of suppliers. At the moment, approximately 80 percent of the total purchasing budget is allocated to only 14 percent of the supplier base. The supplier base can therefore be assumed to consist of a high number of suppliers supplying only a few products with a low turnover. Based on this, it can be concluded that the supplier base includes several opportunities for supplier base reduction. The action of reducing the supplier base is perceived as being in line with the sourcing strategy as well as the business strategy and the needed support is therefore believed to be present in order to succeed with performing supplier base reduction. Based on existing research, a conceptual model for supplier base reduction was created. The current situation at Dynapac GmbH was thereafter analysed in order to enable a customization of the model. Interviews were held to obtain input regarding the model and the activities. The overall view on the model was positive and all activities were considered to be relevant to include. Possible customizations of the activities were discussed during the interviews, which resulted in a customized model consisting of activities with either two types of customizations: (1) defined variables or (2) developed processes. Lastly, the model was validated in a pilot test before it was reconfigured and handed over as a methodology. The finalized methodology included a thorough description on how to conduct supplier base reduction from beginning to end, consisting of 14 activities corresponding to five different phases. The first two phases intend to lay the basis for enabling a reduction of the supplier base and the third phase aims at implementing it in practice. The fourth phase consists of analysing the result of the implementation followed by the last phase with focus on continuous improvement of the supplier base.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Base"

1

United States. Dept. of the Air Force, ed. Guide to bare base development. [Washington, D.C.?]: Dept. of the Air Force, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

United States. Dept. of the Air Force., ed. Guide to bare base assets. [Washington, D.C.?]: Dept. of the Air Force, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Force, United States Air, ed. Bare base conceptual planning guide. [Tyndall AFB, Fla.?]: Dept. of the Air Force, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Institute, American Petroleum. Risk-based inspection: Base resource document. Washington, D.C: American Petroleum Institute, 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

United States. Dept. of the Air Force, ed. Guide to bare base facility erection. [Washington, D.C.?]: Dept. of the Air Force, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Teixeira, Faustino Luiz Couto. Comunidades eclesiais de base: Bases teológicas. Petrópolis: Vozes, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

United States. Dept. of the Air Force., ed. Guide to bare base facility erection. [Washington, D.C.]: Dept. of the Air Force, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

United States. Dept. of the Air Force., ed. Guide to bare base facility erection. [Washington, D.C.]: Dept. of the Air Force, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Sorenson, David S. Military base closure: A reference handbook. Westport, Conn: Praeger Security International, 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Defense, U. S. Dept of. Base closure and realignment report. [Washington, D.C.]: Dept. of Defense, 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Base"

1

Gooch, Jan W. "Base." In Encyclopedic Dictionary of Polymers, 68. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_1097.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Arndt, T. "Base." In Springer Reference Medizin, 404. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-48986-4_488.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Arndt, T. "Base." In Lexikon der Medizinischen Laboratoriumsdiagnostik, 1. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-49054-9_488-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hill, Keith, Tom Baranowski, Walter Schmidt, Nicole Prommer, Michel Audran, Philippe Connes, Ramiro L. Gutiérrez, et al. "Base." In Encyclopedia of Exercise Medicine in Health and Disease, 116. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-540-29807-6_2138.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Weik, Martin H. "base." In Computer Science and Communications Dictionary, 105. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_1358.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Gooch, Jan W. "Base." In Encyclopedic Dictionary of Polymers, 878. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_13235.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bährle-Rapp, Marina. "base." In Springer Lexikon Kosmetik und Körperpflege, 59. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71095-0_994.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Bährle-Rapp, Marina. "Base." In Springer Lexikon Kosmetik und Körperpflege, 59. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71095-0_995.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Johnson, Dana T. "Base Two." In Beyond Base Ten, 51–64. New York: Routledge, 2021. http://dx.doi.org/10.4324/9781003233282-12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Johnson, Dana T. "Base Five." In Beyond Base Ten, 31–42. New York: Routledge, 2021. http://dx.doi.org/10.4324/9781003233282-10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Base"

1

Abdel-Aty, Ahmad, Todd Spock, R. Manes, Patrick Tomak, Sacit Omay, and Eugenia Vining. "Skull Base Complications after Medical Treatment of Skull Base Tumors: Case Illustrations." In 29th Annual Meeting North American Skull Base Society. Georg Thieme Verlag KG, 2019. http://dx.doi.org/10.1055/s-0039-1679722.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Syed, Zuby, and Ann K. Jay. "Posterior Skull Base Imaging: Anatomy and Pathology for the Skull Base Surgeon." In 31st Annual Meeting North American Skull Base Society. Georg Thieme Verlag KG, 2022. http://dx.doi.org/10.1055/s-0042-1743905.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Suri, Ashish. "Simulation in Skull-Base Neurosurgery." In 29th Annual Meeting North American Skull Base Society. Georg Thieme Verlag KG, 2019. http://dx.doi.org/10.1055/s-0039-1679572.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hernandez, Jesus Gimeno, Juan Manuel Revuelta Barbero, Carla Fernandez Garcia, Andres Camilo Vargas Jimenez, Manuel Gomez Serrano, Pablo Sarrio Solera, Diana Hernanperez Hidalgo, Melchor Saiz Pardo-sanz, and Maria Cruz Iglesias Moreno. "Anterior Cranial Base Meningeal Hemangiopericytoma." In 30th Annual Meeting North American Skull Base Society. Georg Thieme Verlag KG, 2020. http://dx.doi.org/10.1055/s-0040-1702724.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Chu, Jia, Timothy Deklotz, and Ann Jay. "Imaging of Central Skull Base Lesions: What the Skull Base Surgeon Needs to Know." In 29th Annual Meeting North American Skull Base Society. Georg Thieme Verlag KG, 2019. http://dx.doi.org/10.1055/s-0039-1679536.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Roland, Lauren, and Arturo Solares. "Diagnostic Challenges in Skull Base Osteosarcoma." In 29th Annual Meeting North American Skull Base Society. Georg Thieme Verlag KG, 2019. http://dx.doi.org/10.1055/s-0039-1679657.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Cappello, Zachary, Christopher Roxbury, Janki Shah, Troy Woodard, Varun Kshettry, Pablo Recinos, and Raj Sindwani. "in Endoscopic Endonasal Skull Base Reconstruction." In 29th Annual Meeting North American Skull Base Society. Georg Thieme Verlag KG, 2019. http://dx.doi.org/10.1055/s-0039-1679776.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Jay, Ann K., Nelya Ebadirad, and Alexandra Eckert. "Skull Base Infections: Pearls and Pitfalls." In 31st Annual Meeting North American Skull Base Society. Georg Thieme Verlag KG, 2022. http://dx.doi.org/10.1055/s-0042-1743907.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Desai, Deesha, Paul A. Gardner, and Carl H. Snyderman. "Experience with International Skull Base Surgery." In 31st Annual Meeting North American Skull Base Society. Georg Thieme Verlag KG, 2022. http://dx.doi.org/10.1055/s-0042-1744002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Michel, F. Curtis. "Space physics from a lunar base project." In Physics and Astrophysics from a Lunar Base. AIP, 1990. http://dx.doi.org/10.1063/1.39117.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Base"

1

CORPS OF ENGINEERS OMAHA NE. North Base Rehabilitation Study, Edwards Air Force Base, California. Fort Belvoir, VA: Defense Technical Information Center, September 1990. http://dx.doi.org/10.21236/ada371361.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

TACTICAL AIR COMMAND LANGLEY AFB VA. Base Realignment Activities at Bergstrom Air Force Base, Texas. Fort Belvoir, VA: Defense Technical Information Center, November 1989. http://dx.doi.org/10.21236/ada268958.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Milanovich, F., J. Albala, B. Colston, R. Langlois, and K. Venkateswaren. Broad base biological assay using liquid based detection assays. Office of Scientific and Technical Information (OSTI), October 2000. http://dx.doi.org/10.2172/15006163.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Trotter, G. Terminology for Forwarding Information Base (FIB) based Router Performance. RFC Editor, December 2001. http://dx.doi.org/10.17487/rfc3222.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Perkins, Nicholas R., James Stanley, and Laura Zander. Implementation of Activity Based Cost Management Aboard Base Installations. Fort Belvoir, VA: Defense Technical Information Center, September 2004. http://dx.doi.org/10.21236/ada427229.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Shuely, Wendel J. Chemical-Material Data Bases: Chemical Defense Material Data Base. Fort Belvoir, VA: Defense Technical Information Center, April 1997. http://dx.doi.org/10.21236/ada327593.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

GEORGIA INST OF TECH ATLANTA. Next Generation Bare Base Waste Processing System (Phase 1). Fort Belvoir, VA: Defense Technical Information Center, August 1997. http://dx.doi.org/10.21236/ada583029.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Everett Sondreal and John Hendrikson. Base Research Program. Office of Scientific and Technical Information (OSTI), March 2009. http://dx.doi.org/10.2172/984507.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Lewis, E. D., and R. S. Moore. Characteristics Data Base. Office of Scientific and Technical Information (OSTI), August 1990. http://dx.doi.org/10.2172/6389228.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Calhoun, P., J. Loughney, E. Guttman, G. Zorn, and J. Arkko. Diameter Base Protocol. RFC Editor, September 2003. http://dx.doi.org/10.17487/rfc3588.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!