Relevant bibliographies by topics / Baseband Receiver

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Baseband Receiver'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Baseband Receiver.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Baseband Receiver"

1

MAHMOUD, SOLIMAN A., and EMAN A. SOLIMAN. "MULTI-STANDARD RECEIVER BASEBAND CHAIN USING DIGITALLY PROGRAMMABLE OTA BASED ON CCII AND CURRENT DIVISION NETWORKS." Journal of Circuits, Systems and Computers 22, no. 04 (April 2013): 1350019. http://dx.doi.org/10.1142/s0218126613500199.

Full text
Abstract:
In this paper, a digitally programmable OTA-based multi-standard receiver baseband chain is presented. The multi-standard receiver baseband chain consists of two programmable gain amplifiers (PGA1 and PGA2) and a fourth-order LPF. The receiver is suitable for Bluetooth/UMTS/DVB-H/WLAN standards. Three different programmable OTA architectures based on second generation current conveyors (CCIIs) and Current Division Networks (CDNs) are discussed. The programmable OTA with the lowest power consumption, moderate area and good linearity — better than -50 dB HD3 — is selected to realize the multi-standard baseband receiver chain. The power consumption of the receiver chain is 6 mW. The DC gain varies over a 68 dB range with 1 MHz to 13.6 MHz programmable bandwidth. The receiver baseband chain is realized using 90 nm CMOS technology model under ±0.5 V voltage supply.
APA, Harvard, Vancouver, ISO, and other styles
2

Lee, Joohyun, Hyuk Kim, Jinkyu Kim, Bontae Koo, Nakwoong Eum, and Hyuckjae Lee. "Design of AT-DMB Baseband Receiver SoC." ETRI Journal 31, no. 6 (December 4, 2009): 795–802. http://dx.doi.org/10.4218/etrij.09.1209.0009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ferris, R. H., and S. J. Saunders. "A 256 MHz Bandwidth Baseband Receiver/Spectrometer." Experimental Astronomy 17, no. 1-3 (June 2004): 269–77. http://dx.doi.org/10.1007/s10686-005-6079-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kharchenko, Volodymyr, Yuri Barabanov, and Andrii Grekhov. "MODELING OF ADS-B DATA TRANSMISSION VIA SATELLITE." Aviation 17, no. 3 (October 7, 2013): 119–27. http://dx.doi.org/10.3846/16487788.2013.840057.

Full text
Abstract:
For modelling transmission of ADS-B messages via low-orbit satellite constellation Iridium, the original model of a communication channel “Aircraft-to-Satellite-to-Ground Station” was built using MATLAB Simulink. The model comprises “Aircraft Uplink Transmitter” (Bernoulli Random Binary Generator, Convolutional Encoder, BPSK Baseband Modulator, High Power Amplifier with a memoryless nonlinearity, Transmitter Dish Antenna Gain), “Uplink Path” (Free Space Path Loss, Phase/Frequency Offset), “Satellite Transponder” (Receiver Dish Antenna Gain, Satellite Receiver System Temperature, Complex Baseband Amplifier, Phase Noise, Transmitter Dish Antenna Gain), “Downlink Path” (Free Space Path Loss, Phase/Frequency Offset), “Ground Station Downlink Receiver” (Receiver Dish Antenna Gain, Ground Receiver System Temperature, Viterbi Decoder), “Error Rate Calculation” block and “Display”. The modelling was realized without and with convolutional coding (r = 3/4, K = 7) at different noise temperatures and free space losses. Dependencies of a Bit Error Rate on free space path losses, antenna's diameter, phase/frequency off-sets, satellite transponder linear gain, aircraft and satellite transponder high power amplifier back-off level, and phase noise were received and analysed.
APA, Harvard, Vancouver, ISO, and other styles
5

Kim, Seung-Geun, Chang-Ho Yun, Sea-Moon Kim, and Yong-Kon Lim. "Baseband Receiver Design for Maritime VHF Digital Communications." Journal of Korea Information and Communications Society 36, no. 8B (August 31, 2011): 1012–20. http://dx.doi.org/10.7840/kics.2011.36b.8.1012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chen, Hsiao-Yun, Jyun-Nan Lin, Hsiang-Sheng Hu, and Shyh-Jye Jou. "STBC-OFDM Downlink Baseband Receiver for Mobile WMAN." IEEE Transactions on Very Large Scale Integration (VLSI) Systems 21, no. 1 (January 2013): 43–54. http://dx.doi.org/10.1109/tvlsi.2011.2181965.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gharaee, Hossein, and Abdolreza Nabavi. "Baseband implementation of OTR-UWB receiver using FPGA." AEU - International Journal of Electronics and Communications 64, no. 3 (March 2010): 258–66. http://dx.doi.org/10.1016/j.aeue.2009.01.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

MAHMOUD, SOLIMAN A. "A GAIN/FILTERING INTERLEAVED BASEBAND CHAIN ARCHITECTURES FOR MULTISTANDARD RECONFIGURABLE RECEIVERS." Journal of Circuits, Systems and Computers 21, no. 01 (February 2012): 1250008. http://dx.doi.org/10.1142/s0218126612500089.

Full text
Abstract:
In this paper, four baseband chain architectures used in multistandard (UMTS–WLAN) reconfigurable receivers will be introduced, simulated and, compared. The architectures are realized using 0.25 μm CMOS technology operating with 1.2 V supply voltage. The baseband chain consists of three stages: the first and the last stage are programmable gain amplifiers and the intermediate stage is an active Gm-RC LPF filter. The proposed architectures are compared in terms of DC-gain, noise, linearity, SFDR, and power consumption. The best receiver architecture is then derived based on system level analysis and based on a defined figure-of-merit. The best baseband chain bandwidth is controlled by the active Gm-RC filter with a value 2.2 MHz for UMTS and 11 MHz for WLAN. The baseband gain can be programmed in the range of -6÷68 dB, while the input-referred noise density is less 20 nV/√Hz for UMTS and 25 μV/√Hz for WLAN.
APA, Harvard, Vancouver, ISO, and other styles
9

Pipino, Alessandra, Marcello De Matteis, Karen Wan, and Andrea Baschirotto. "A Simple Algorithm for Specs Definition in Wireless Receivers." Journal of Circuits, Systems and Computers 26, no. 04 (December 6, 2016): 1750062. http://dx.doi.org/10.1142/s0218126617500621.

Full text
Abstract:
This paper presents a system-level design procedure for wireless receivers, which allows an optimum distribution of the specifications-per-stage along the receiver. The main idea hereby developed is to start from a specific set of requirements (given by the selected telecommunications standards) in terms of bit-error-rate (BER) and blocker mask scenario in frequency domain, and to finally achieve a certain set of specifications for each stage in the receiver chain (i.e., LNA, mixer, baseband and ADC). The proposed system-level design algorithm allows fixing the receiver specifications-per-stage with a reduced set of equations and successive iterations. Moreover, an optimum design for baseband section (i.e., complex filter and the ADC) is also found, by achieving an optimum trade-off between filter order and ADC equivalent-number-of-bits (ENOB). In order to validate the hereby proposed algorithm, a low-energy Bluetooth low-IF receiver has been modeled and simulated (by Simulink), and extensive time-domain simulation results have been provided, complying with the expected Bluetooth standard signal-to-noise-and-distortion ratio (SNDR).
APA, Harvard, Vancouver, ISO, and other styles
10

Deng, Jun, Lin Tao Liu, Yu Jing Li, Xiao Zong Huang, Xu Huang, and Lun Cai Liu. "Design of a SoC With High-Speed DDC for Software Radio Receiver." Advanced Materials Research 605-607 (December 2012): 1875–79. http://dx.doi.org/10.4028/www.scientific.net/amr.605-607.1875.

Full text
Abstract:
This paper presents a novel scheme for software radio receiver application, which integrates a high-speed digital down converter (DDC) block into a SoC (system on chip) based on OR1200 CPU. The proposed design can transform intermediate frequency (IF) signal to baseband signal and realize the real-time baseband signal processing. The simulation results indicate that the design is capable of accepting data at a 200MHz sample rate and the verification results based on Xilinx FPGA show that the SFDR of DDC can reach to 70.59dBFS.The synthesized results on 0.18um CMOS technology reveal that the maximum clock frequency can reach to 116MHz and the total area is 5.662mm2, and the corresponding power consumption is below 150mW. It should have a good potential for wireless communication applications.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Baseband Receiver"

1

Yang, Shijun. "Smart receiver using baseband digital signal processing." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0017/MQ48478.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yang, Shijun Carleton University Dissertation Engineering Electronics. "Smart receiver using baseband digital signal processing." Ottawa, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Yushan. "Receiver algorithms that enable multi-mode baseband terminals." Thesis, University of Edinburgh, 2005. http://hdl.handle.net/1842/11051.

Full text
Abstract:
Wireless communications is rapidly moving towards so called 4G wireless systems. This has led to an increasing demand to develop integrated mobile terminals which have multi-mode capabilities, i.e. multiple communication systems can coexist. The central goal of this thesis is to determine appropriate structures and algorithms for multi-mode receivers that maximize flexibility without excessive compromise in performance. The work develops multi-mode terminals from the algorithm viewpoint, reducing receiver complexity by taking advantage of the commonalities among different specifications and receiver requirements. For example, the commonalities among DAB, DVB-T and HIPERLAN-2 physical layers are investigated and a common system clock is adopted for these communication systems. In addition, a receiver architecture combining sampling rate conversion and OFDM symbol synchronisation is also presented. The coexistence of WCDMA and OFDM systems from the perspective of using the same equalisation structure is elaborated; chip-level frequency domain equalisation for WCDMA forms a major part of this thesis. Simulation results verify the effectiveness of the proposed equalisation algorithms. Moreover, SC-FDE with more flexible structures, i.e. with a varying length feedback filter or without cyclic prefix, is examined. Then the importance of an accurate channel estimation for practical spread spectrum systems is emphasized. A code-multiplexed pilot sequence is used for the purpose of channel estimation in both WCDMA and CP-CDMA systems and to maintain bandwidth efficiency. System performance is improved significantly by a proposed joint iterative channel estimation and parallel interference cancellation algorithm. Finally conclusions are drawn and suggestions for further work presented.
APA, Harvard, Vancouver, ISO, and other styles
4

Sahin, Mustafa. "Baseband receiver algorithms for 4G co-channel femtocells." [Tampa, Fla] : University of South Florida, 2009. http://purl.fcla.edu/usf/dc/et/SFE0003283.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Axell, Christian, and Mikael Brogsten. "Efficient WiMAX Receiver Implementation on a Programmable Baseband Processor." Thesis, Linköping University, Department of Electrical Engineering, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-7684.

Full text
Abstract:

WiMAX provides broadband wireless access and uses OFDM as the underlying modulation technique. In an OFDM based wireless communication system, the channel will distort the transmitted signal and the performance is seriously degraded by synchronization mismatches between the transmitter and receiver. Therefore such systems require extensive digital signal processing of the received signal for retrieval of the transmitted information.

In this master thesis, parts of an IEEE 802.16d (WiMAX) receiver have been implemented on a programmable baseband processor. The implemented parts constitute baseband algorithms which compensates for the effects from the channel and synchronization errors. The processor has a new innovative architecture with an instruction set optimized for baseband applications.

This report includes theory behind the baseband algorithms as well as a presentation of how they are implemented on the processor. An impartial evaluation of the processor performance with respect to the algorithms used in the reference model is also presented in the report.

APA, Harvard, Vancouver, ISO, and other styles
6

Jeon, Okjune. "Analog baseband processor for CMOS 5-GHz WLAN receiver." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0013035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bahmani, Faramarz. "High performance RF and baseband building blocks for wireless receivers." Texas A&M University, 2003. http://hdl.handle.net/1969.1/5818.

Full text
Abstract:
Because of the unique architecture of wireless receivers, a designer must understand both the high frequency aspects as well as the low-frequency analog considerations for different building blocks of the receiver. The primary goal of this research work is to explore techniques for implementing high performance RF and baseband building blocks for wireless applications. Several novel techniques to improve the performance of analog building blocks are presented. An enhanced technique to couple two LC resonators is presented which does not degrade the loaded quality factor of the resonators which results in an increased dynamic range. A novel technique to automatically tune the quality factor of LC resonators is presented. The proposed scheme is stable and fast and allows programming both the quality factor and amplitude response of the LC filter. To keep the oscillation amplitude of LC VCOs constant and thus achieving a minimum phase noise and a reliable startup, a stable amplitude control loop is presented. The proposed scheme has been also used in a master-slave quality factor tuning of LC filters. An efficient and low-cost architecture for a 3.1GHz-10.6GHz ultra-wide band frequency synthesizer is presented. The proposed scheme is capable of generating 14A novel pseudo-differential transconductance amplifier is presented. The proposed scheme takes advantage of the second-order harmonic available at the output current of pseudo-differential structure to cancel the third-order harmonic distortion. A novel nonlinear function is proposed which inherently removes the third and the fifth order harmonics at its output signal. The proposed nonlinear block is used in a bandpass-based oscillator to generate a highly linear sinusoidal output. Finally, a linearized BiCMOS transconductance amplifier is presented. This transconductance is used to build a third-order linear phase low pass filter with a cut-off frequency of 264MHz for an ultra-wide band receiver. carrier frequencies.
APA, Harvard, Vancouver, ISO, and other styles
8

Svensson, Gustaf. "Analog Baseband Implementation of a Wideband Observation Receiver for RF Applications." Thesis, Linköpings universitet, Elektroniska Kretsar och System, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-131081.

Full text
Abstract:
During the thesis, a two-staged analog baseband circuit incorporating a passive analog filter and a wideband voltage amplifier were successfully designed, implemented in an IC mask layout in a 65nm CMOS technology, and joined with a previously designed analog front-end design to form a wideband observation receiver. The baseband circuit is capable of receiving an IF bandwidth up to 990MHz produced by the analog front-end using low-side injection. The final circuit shows high IMD3 of at least 90 dBc. The voltage amplifier delivers a voltage amplification of 15 dB with around 0.08 dB amplitude precision over the bandwidth, while the passive filter is capable of a passband amplitude precision of 0.67 dB over the bandwidth, while effectively suppress signal images created by the mixer with at least 60 dBc. Both stages were realized in an IC mask layout, in addition, the filter layout were simulated using an EM simulator.
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, Minghui. "Multiple Gb/s DQPSK direct-conversion baseband receiver for 60-GHz communications." Diss., Restricted to subscribing institutions, 2007. http://proquest.umi.com/pqdweb?did=1375535621&sid=1&Fmt=2&clientId=1564&RQT=309&VName=PQD.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Park, Seok-Bae. "Compact high performance analog CMOS baseband design solutions for multistandard wireless transceivers." Columbus, Ohio : Ohio State University, 2006. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1149024229.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Baseband Receiver"

1

Chiueh, Tzi-Dar. Baseband receiver design for wireless communications. Hoboken, NJ: John Wiley, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chiueh, Tzi-Dar. OFDM baseband receiver design for wireless communications. Singapore: John Wiley & Sons (Asia), Pte Ltd., 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chiueh, Tzi-Dar. Baseband receiver design for wireless MIMO-OFDM communications. 2nd ed. Hoboken, N.J: Wiley, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Chiueh, Tzi-Dar, Pei-Yun Tsai, and I.-Wei Lai. Baseband Receiver Design for Wireless MIMO-OFDM Communications. Singapore: John Wiley & Sons Singapore Pte. Ltd., 2012. http://dx.doi.org/10.1002/9781118188194.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dickinson, Mark. Digital adaptive matching of baseband channels in radio receivers. Birmingham: University of Birmingham, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chiueh, Tzi-Dar, and Pei-Yun Tsai. OFDM Baseband Receiver Design for Wireless Communications. Wiley & Sons, Incorporated, John, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chiueh, Tzi-Dar, and Pei-Yun Tsai. OFDM Baseband Receiver Design for Wireless Communications. Wiley, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chiueh, Tzi-Dar, Pei-Yun Tsai, and I.-Wei Lai. Baseband Receiver Design for Wireless MIMO-OFDM Communications. Wiley & Sons, Incorporated, John, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chiueh, Tzi-Dar, Pei-Yun Tsai, and I.-Wei Lai. Baseband Receiver Design for Wireless MIMO-OFDM Communications. Wiley & Sons, Incorporated, John, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chiueh, Tzi-Dar, Pei-Yun Tsai, and I.-Wei Lai. Baseband Receiver Design for Wireless MIMO-OFDM Communications. Wiley & Sons, Incorporated, John, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Baseband Receiver"

1

Lynn, Lapoe. "The Receiver: Baseband Analog Processing." In Low-Power CMOS Wireless Communications, 175–215. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5457-8_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hurskainen, Heikki, and Jari Nurmi. "Baseband Hardware Implementations for Galileo Receiver." In GALILEO Positioning Technology, 121–37. Dordrecht: Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-007-1830-2_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Venkataramanan, V., S. Lakshmi, Wallace Dalmet, Moinuddin Khaja, and Irfan Kherani. "LTE Baseband Receiver Implementation on Simulink." In Lecture Notes on Data Engineering and Communications Technologies, 387–95. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-1002-1_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Raju, Kota Solomon, Y. Pratap, Virendra Patel, Gaurav Kumar, S. M. M. Naidu, Amit Patwardhan, Rabinder Henry, and P. Bhanu Prasad. "Implementation of Multichannel GPS Receiver Baseband Modules." In Advances in Intelligent and Soft Computing, 817–24. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-30157-5_81.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sheng, Samuel, and Robert Brodersen. "The Receiver: Baseband Spread-Spectrum Digital Signal Processor." In Low-Power CMOS Wireless Communications, 217–44. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5457-8_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chuang, Gene C. H., Pan-An Ting, Ying-Chuan Hsiao, Jen-Yuan Hsu, Jiun-You Lai, Cheng-Ming Chen, and Chi-Tien Sun. "Mobile MIMO WiMAX System-on-Chip Design." In Baseband Receiver Design for Wireless MIMO-OFDM Communications, 321–41. Singapore: John Wiley & Sons Singapore Pte. Ltd., 2012. http://dx.doi.org/10.1002/9781118188194.ch11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mu, Jun, Shaozhen Zhang, and Bin Li. "Feasibility Analysis of Baseband Architecture for Multi-constellation GNSS Receiver." In Lecture Notes in Electrical Engineering, 1199–207. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5959-4_147.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wang, Ershen, and Di Yang. "Research on Receiver Autonomous Integrity Monitoring Technology Based on GNSS Baseband Signal." In Lecture Notes in Electrical Engineering, 207–18. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7759-4_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Benkeser, Christian, and Qiuting Huang. "Design and Optimization of a Digital Baseband Receiver ASIC for GSM/EDGE." In VLSI-SoC: Forward-Looking Trends in IC and Systems Design, 100–127. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-28566-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sheng, Chengke, and Chris Thron. "Optimal Update Rate for NLMS in 3GPP WCDMA Base Station Baseband Receiver." In Adaptive Antenna Arrays, 553–67. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-05592-2_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Baseband Receiver"

1

James, Rini Maria, I. Mahalakshmi, and M. J. S. Rangachar. "OFDM baseband receiver performance analysis for various received signal impairments." In 2014 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT). IEEE, 2014. http://dx.doi.org/10.1109/iccicct.2014.6992991.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Yuhong, Zhongding Lei, and Ho Huat Peh. "High sensitivity ZigBee baseband receiver design." In TENCON 2016 - 2016 IEEE Region 10 Conference. IEEE, 2016. http://dx.doi.org/10.1109/tencon.2016.7848288.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tran, Vinh T., Nagaraj C. Shivaramaiah, Oliver Diessel, and Andrew G. Dempster. "A programmable multi-GNSS baseband receiver." In 2015 IEEE International Symposium on Circuits and Systems (ISCAS). IEEE, 2015. http://dx.doi.org/10.1109/iscas.2015.7168849.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wu, Chih-Feng, and Muh-Tian Shiue. "CORDIC-based OFDM baseband receiver design." In 2014 6th International Symposium on Communications, Control and Signal Processing (ISCCSP). IEEE, 2014. http://dx.doi.org/10.1109/isccsp.2014.6877886.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jumaah, Fawaz Mohammed, S. J. Hashim, Roslina Mohd Sidek, and Fakhrul Zaman Rokhani. "Low power GPS baseband receiver design." In 2013 Fourth Annual International Conference on Energy Aware Computing Systems and Applications (ICEAC). IEEE, 2013. http://dx.doi.org/10.1109/iceac.2013.6737639.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Yuhong, Sumei Sun, Peng Hui Tan, and Ernest Kurniawan. "Baseband receiver design for IEEE 802.11ah." In TENCON 2017 - 2017 IEEE Region 10 Conference. IEEE, 2017. http://dx.doi.org/10.1109/tencon.2017.8227976.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Altamimi, A., D. Rakhmatov, and M. McGuire. "Polar baseband receiver for low-end WLAN." In 2014 IEEE 25th International Conference on Application-specific Systems, Architectures and Processors (ASAP). IEEE, 2014. http://dx.doi.org/10.1109/asap.2014.6868633.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chuan Wu, Jialin Cao, Dan Bao, Yun Chen, and Xiaoyang Zeng. "A 60mW baseband SoC for CMMB receiver." In 2012 17th Asia and South Pacific Design Automation Conference (ASP-DAC). IEEE, 2012. http://dx.doi.org/10.1109/aspdac.2012.6165000.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Peng, Chen-Hung, Kai-Ting Shr, Ming-Hung Lin, and Yuan-Hao Huang. "A baseband receiver for optical OFDM systems." In 2011 International Symposium on VLSI Design, Automation and Test (VLSI-DAT). IEEE, 2011. http://dx.doi.org/10.1109/vdat.2011.5783584.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Xiaobo Jiang, Hongyuan Li, Fangyuan Li, and Canhong Liang. "Design of baseband receiver based on CMMB." In 2010 International Symposium on Intelligent Signal Processing and Communications Systems (ISPACS 2010). IEEE, 2010. http://dx.doi.org/10.1109/ispacs.2010.5704698.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Baseband Receiver' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography