Relevant bibliographies by topics / Based Polyol

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Based Polyol'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Based Polyol.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Based Polyol"

1

Ji, Dong, Zheng Fang, Zhi Dong Wan, et al. "Rigid Polyurethane Foam Based on Modified Soybean Oil." Advanced Materials Research 724-725 (August 2013): 1681–84. http://dx.doi.org/10.4028/www.scientific.net/amr.724-725.1681.

Full text
Abstract:
Two bio-based polyols (Polyol-r and Polyol-t) were synthesized from commercially available epoxidized soybean oil (ESBO). Polyol-r was obtained from ring opening of ESBO in the presence of fluoboric acid, while Polyol-t from a transesterification of Polyol-r with glycerol through a litharge catalyst. A rigid polyurethane foam was prepared by mixed polyols (Polyol-t and commercial 635 polyether polyol) with 4,4'-methylene-bis (phenyl isocyanate). The hydroxyl value of Polyol-t was higher than that of Polyol-r, which was also backed up by Fourier transform infrared spectrometry. Scanning electro
APA, Harvard, Vancouver, ISO, and other styles
2

Lee, Joo Hyung, Seong Hun Kim, and Kyung Wha Oh. "Bio-Based Polyurethane Foams with Castor Oil Based Multifunctional Polyols for Improved Compressive Properties." Polymers 13, no. 4 (2021): 576. http://dx.doi.org/10.3390/polym13040576.

Full text
Abstract:
Currently, most commercial polyols used in the production of polyurethane (PU) foam are derived from petrochemicals. To address concerns relating to environmental pollution, a sustainable resource, namely, castor oil (CO), was used in this study. To improve the production efficiency, sustainability, and compressive strength of PU foam, which is widely used as an impact-absorbing material for protective equipment, PU foam was synthesized with CO-based multifunctional polyols. CO-based polyols with high functionalities were synthesized via a facile thiol-ene click reaction method and their chemi
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Fukai, Hao Yu, Yuyuan Deng, and Xinyu Xu. "Synthesis and characterization of different soybean oil-based polyols with fatty alcohol and aromatic alcohol." e-Polymers 21, no. 1 (2021): 491–99. http://dx.doi.org/10.1515/epoly-2021-0052.

Full text
Abstract:
Abstract In this article, five kinds of soybean oil-based polyols (polyol-E, polyol-P, polyol-I, polyol-B, and polyol-M) were prepared by ring-opening the epoxy groups in epoxidized soybean oil (ESO) with ethyl alcohol, 1-pentanol, isoamyl alcohol, p-tert-butylphenol, and 4-methoxyphenol in the presence of tetrafluoroboric acid as the catalyst. The SOPs were characterized by FTIR, 1H NMR, GPC, viscosity, and hydroxyl numbers. Compared with ESO, the retention time of SOPs is shortened, indicating that the molecular weight of SOPs is increased. The structure of different monomers can significant
APA, Harvard, Vancouver, ISO, and other styles
4

Lumcharoen, Duangphon, and Onusa Saravari. "Preparation and Characterization of Flexible Polyurethane Foams from Palm Oil-Based Polyol." Advanced Materials Research 911 (March 2014): 352–56. http://dx.doi.org/10.4028/www.scientific.net/amr.911.352.

Full text
Abstract:
Flexible polyurethane (PU) foams were prepared by replacing commercial petroleum-based polyether polyol with palm oil-based polyol up to 50 wt%. Palm oil was converted to polyol by transesterification reaction with glycerol using calcium oxide as a catalyst. PU foams were then prepared from reaction between mixtures of palm oil-based polyol and petrochemical polyols with toluene diisocyanate (TDI) using water as blowing agent. The morphology and physical-mechanical properties including apparent density, indentation hardness, compressive deflection coefficient or support factor, tensile strengt
APA, Harvard, Vancouver, ISO, and other styles
5

Nciri, Nader, Jeong Hyun Kim, Nam Ho Kim, and Nam Jun Cho. "Investigation on the Chemical and Physical Properties of Vegetable Oil-Based Polyols for their Potential Application as Asphalt Rejuvenators." Key Engineering Materials 723 (December 2016): 556–66. http://dx.doi.org/10.4028/www.scientific.net/kem.723.556.

Full text
Abstract:
Up to date, no extravagant attempts have been made to use the vegetable oil-based polyols as rejuvenator agents for aged asphalts. In this context, the nature and composition of these biodegradable products need to be identified and physicochemical properties of different nature of compounds need to be measured. Three different vegetable oil-based polyols designed as castor oil polyol, soybean flexible polyol, and soybean rigid polyol were characterized by FT-IR, TLC-FID, 1H-NMR, and 13C-NMR and by the determination of some usual characteristics such as acid value, hydroxyl value, iodine value
APA, Harvard, Vancouver, ISO, and other styles
6

Paciorek-Sadowska, Joanna, Marcin Borowicz, and Marek Isbrandt. "New Poly(lactide-urethane-isocyanurate) Foams Based on Bio-Polylactide Waste." Polymers 11, no. 3 (2019): 481. http://dx.doi.org/10.3390/polym11030481.

Full text
Abstract:
The article presents the results of research on the synthesis of a new eco-polyol based on polylactide (PLA) waste and its use for the production of rigid polyurethane-polyisocyanurate (RPU/PIR) foams. The obtained recycling-based polyol was subjected to analytical, physicochemical and spectroscopic tests (FTIR, 1H NMR, 13C NMR) to confirm its suitability for the synthesis of polyurethane materials. Then, it was used to partially replace petrochemical polyol in polyurethane formulation. The obtained RPU/PIR foams were characterized by lower apparent density, brittleness, and water absorption.
APA, Harvard, Vancouver, ISO, and other styles
7

Han, Yan Ming, Te Fu Qin, and Fu Xiang Chu. "Preparation and Properties of Polyurethane Heat Insulating Building Materials Based on Lignin." Applied Mechanics and Materials 193-194 (August 2012): 505–8. http://dx.doi.org/10.4028/www.scientific.net/amm.193-194.505.

Full text
Abstract:
The synthesis of polymer materials from renewable biomass resources has attracted lots of attention. In this study, lignin based polyurethane heat insulating building materials were prepared from isocyanate and lignin polyol. Lignin was modified by polyethylene glycol and glycerol with 0.6% acid at 120°C to obtain lignin polyol containing reactive hydroxyl groups, and then polyurethane foams were prepared by the reaction between the above lignin polyol and isocyanate. Hydroxyl value of lignin polyol, gel time, apparent activation energy for polymerization, impact strength and thermal conductiv
APA, Harvard, Vancouver, ISO, and other styles
8

de Luca Bossa, Ferdinando, Letizia Verdolotti, Vincenzo Russo, et al. "Upgrading Sustainable Polyurethane Foam Based on Greener Polyols: Succinic-Based Polyol and Mannich-Based Polyol." Materials 13, no. 14 (2020): 3170. http://dx.doi.org/10.3390/ma13143170.

Full text
Abstract:
It is well known that the traditional synthetic polymers, such as Polyurethane foams, require raw materials that are not fully sustainable and are based on oil-feedstocks. For this reason, renewable resources such as biomass, polysaccharides and proteins are still recognized as one of the most promising approaches for substituting oil-based raw materials (mainly polyols). However, polyurethanes from renewable sources exhibit poor physical and functional performances. For this reason, the best technological solution is the production of polyurethane materials obtained through a partial replacem
APA, Harvard, Vancouver, ISO, and other styles
9

Kamairudin, Norsuhaili, Luqman Chuah Abdullah, Seng Soi Hoong, Dayang Radiah Awang Biak, and Hidayah Ariffin. "Preparation and Effect of Methyl-Oleate-Based Polyol on the Properties of Rigid Polyurethane Foams as Potential Thermal Insulation Material." Polymers 15, no. 14 (2023): 3028. http://dx.doi.org/10.3390/polym15143028.

Full text
Abstract:
Recently, most of the commercial polyols used in the production of rigid polyurethane foams (RPUFs) have been derived from petrochemicals. Therefore, the introduction of modified palm oil derivatives-based polyol as a renewable material into the formulation of RPUFs is the focus of this study. A palm oil derivative—namely, methyl oleate (MO)—was successfully modified through three steps of reactions: epoxidation reaction, ring-opened with glycerol, followed by amidation reaction to produce a bio-based polyol named alkanolamide polyol. Physicochemical properties of the alkanolamide polyol were
APA, Harvard, Vancouver, ISO, and other styles
10

Sendijarevic, Ibrahim, Karol W. Pietrzyk, Christi M. Schiffman, Vahid Sendijarevic, Alper Kiziltas, and Debbie Mielewski. "Polyol from spent coffee grounds: Performance in a model pour-in-place rigid polyurethane foam system." Journal of Cellular Plastics 56, no. 6 (2020): 630–45. http://dx.doi.org/10.1177/0021955x20912204.

Full text
Abstract:
The objective of this study was to produce a polyol from spent coffee grounds via acid liquification process that meets performance requirements for use in polyurethane applications. The spent coffee grounds based polyol was characterized and evaluated on a fully catalyzed model rigid polyurethane foam system. The pH of the polyol was 6.8, acid value 4.12 mg KOH/g, and hydroxyl value 302.6 mg KOH/g, which are in the range of polyols used in rigid polyurethane foams. The reactivity study confirmed enhanced reactivity of the spent coffee grounds polyol compared to standard sucrose-glycerol initi
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Based Polyol"

1

Kiatsimkul, Pimphan. "Use of enzymes to produce soy-based polyol for polyurethane." Diss., Columbia, Mo. : University of Missouri-Columbia, 2006. http://hdl.handle.net/10355/4351.

Full text
Abstract:
Thesis (Ph. D.)--University of Missouri-Columbia, 2006.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed May 6, 2009). Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
2

Randriantsilefisoa, Rotsiniaina [Verfasser]. "Polyol-based soft hydrogels for biorecognition and tissue engineering applications / Rotsiniaina Randriantsilefisoa." Berlin : Freie Universität Berlin, 2020. http://d-nb.info/1205314784/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Río, Nieto Enrique del. "New polyurethanes from vegetable oil-based polyols." Doctoral thesis, Universitat Rovira i Virgili, 2011. http://hdl.handle.net/10803/31904.

Full text
Abstract:
Los poliuretanos son uno de los materiales poliméricos más usados debido a sus buenas propiedades. Tradicionalmente, los poliuretanos se han sintetizado a partir de derivados del petróleo, sin embargo, teniendo en cuenta motivos de sostenibilidad, se hace necesario desarrollar tecnologías más ecológicas y económicamente viables. En esta tesis se han obtenido poliuretanos con buenas propiedades mecánicas y memoria de forma a partir de polioles basados en aceites vegetales, utilizando diferentes estrategias sintéticas: A partir de oleato de metilo epoxidado, mediante polimerización por apertura
APA, Harvard, Vancouver, ISO, and other styles
4

Hu, Shengjun. "Production and Characterization of Bio-based Polyols and Polyurethanes from Biodiesel-derived Crude Glycerol and Lignocellulosic Biomass." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1374051355.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Almugaiteeb, Turki I. "OPTIMIZING COBALT CARBIDE BASED NANOMATERIALS BY USING NUCLEATING AGENTS AND STATISTICAL ROUTES." VCU Scholars Compass, 2016. http://scholarscompass.vcu.edu/etd/4310.

Full text
Abstract:
The continuous high demand on permanent magnets in industries opened new research plateau to develop alternative magnetic material. The current used permanent magnet materials in the market still suffer from high cost and insufficient magnetic or thermal properties. The central focus of this dissertation work is the optimization of cobalt carbide based nanomaterial by means of modifying polyol synthesis assisted by nucleation agent and systematic statistics using JMP software tool. In most existing literatures, producing cobalt carbide (Co2C or Co3C) lack reproducibility and consistency result
APA, Harvard, Vancouver, ISO, and other styles
6

Tu, Yuan-Chan Hsieh Fu-hung. "Polyurethane foams from novel soy-based polyols." Diss., Columbia, Mo. : University of Missouri--Columbia, 2008. http://hdl.handle.net/10355/6611.

Full text
Abstract:
Title from PDF of title page (University of Missouri--Columbia, viewed on Feb 25, 2010). The entire thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file; a non-technical public abstract appears in the public.pdf file. Dissertation advisor: Dr. Fu-hung Hsieh. Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
7

Saleh, Nabil Abdulkader. "Structure-property relationships in polymer-polyols-based polyurethane elastomers." Thesis, Loughborough University, 1990. https://dspace.lboro.ac.uk/2134/35588.

Full text
Abstract:
Polyurethanes are a class of materials which can be regarded as filling the gap between rubbery elastomers and rigid plastics and metals. They can exhibit both high elongation and resilience, while retaining high modulus which make them unique for a wide variety of applications in which both stiffness and extensibility is needed. It is now widely accepted that the diverse properties of these copolymers are attributed to the existence of a two phase microstructure. One phase is regarded as a glassy or hard segment, whereas the other phase is considered to be rubbery and to give soft segments. T
APA, Harvard, Vancouver, ISO, and other styles
8

Lubguban, Arnold A. Suppes Galen J. "Synthesis and testing of soy-based polyols phosphate and glycerolysis oligomers /." Diss., Columbia, Mo. : University of Missouri--Columbia, 2009. http://hdl.handle.net/10355/6161.

Full text
Abstract:
Title from PDF of title page (University of Missouri--Columbia, viewed on Feb 15, 2010). The entire thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file; a non-technical public abstract appears in the public.pdf file. Dissertation advisor: Dr. Galen J. Suppes Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
9

Benedetti, Pablo. "Conversion de polyols sur catalyseurs à base de nickel." Poitiers, 1994. http://www.theses.fr/1994POIT2264.

Full text
Abstract:
L'etude de la conversion de polyols sur catalyseurs a base de nickel a ete realisee a partir de deux types de catalyseurs de base: nickel raney et nickel depose sur charbon actif. Le nickel raney utilise presente une aire b. E. T. ; de 65 m#2/g et une surface de nickel accessible de 25,4 m#2/g catalyseur. Il est constitue de 90% de nickel, essentiellement metallique, et de 10% d'aluminium (alumine et alliage ni#2al#3). Des catalyseurs au nickel depose sur charbon (15% en masse) ont une tres faible dispersion (d1%). Le nickel sous forme raney ou depose sur charbon peut etre modifie par d'autres
APA, Harvard, Vancouver, ISO, and other styles
10

Lopes, Adrien. "Synthèse de nouveaux monomères à base de polyols biosourcés." Thesis, Lille 1, 2017. http://www.theses.fr/2017LIL10206.

Full text
Abstract:
Face à la raréfaction des ressources fossiles et à la prise de conscience des enjeux environnementaux actuels, la recherche et le développement d’une chimie verte et durable est nécessaire. Cela comprend notamment la nécessité de s’affranchir de l’utilisation des ressources non renouvelables. La conception de plastiques, qui représente une part importante de la consommation en ressources fossiles, à partir de sources alternatives est donc un défi compte tenu des problématiques actuelles. Dans l’optique de ne pas mimer les produits pétro-sourcés existants à partir de la biomasse, qui ne seraien
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Based Polyol"

1

Li, Yebo, Xiaolan Luo, and Shengjun Hu. Bio-based Polyols and Polyurethanes. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-21539-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chishti, Shahid Hussain. Carbohydrate polyols: Studies based on chemical and enzymic synthesis. University of Birmingham, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Simion, Samuela. Marco Polo, Il Devisement dou monde nella redazione veneziana V (cod. Hamilton 424 della Staatsbibliothek di Berlino). Edizioni Ca' Foscari, 2019. http://dx.doi.org/10.30687/978-88-6969-321-2.

Full text
Abstract:
The volume contains the commented edition of the Devisement dou monde based on the Berlin Staatsbibliothek - Preußischer Kulturbesitz Codex, Hamilton 424. The Hamilton 424 Codex, transcribed in Venice in the second half of the fifteenth century, contains the translation of a Latin model (whose features can be partially reconstructed virtually starting from some translation errors) and is the only known witness of V. Due to its characteristics, V represents a crucial point in the definition of the transmission dynamics of Polo’s book: its readings are confirmed, often in a broader form, by the
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Yebo, Shengjun Hu, and Xiaolan Luo. Bio-Based Polyols and Polyurethanes. Springer London, Limited, 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Yebo, Shengjun Hu, and Xiaolan Luo. Bio-Based Polyols and Polyurethanes. Springer, 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Saleh, Nabil Abdulkader. Structure-property relationships in polymer-polyols based polyurethane elastomers. 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Polyhydroxyalkanoate (PHA) Based Blends, Composites and Nanocomposites. Royal Society of Chemistry, The, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Panigrahi, Muktikanta, and Arpan Kumar Nayak. Polyaniline based Composite for Gas Sensors. IOR PRESS, 2021. http://dx.doi.org/10.34256/ioriip212.

Full text
Abstract:
In this research work, we have demonstrated the synthesis, spectroscopic characteristics, thermal behaviour and DC conductivity of a few nanostructured composites, substituted conducting polymers (ICPs) and composites of ICPs. The physical properties of aforementioned composites are significantly changed by the doping with HCl, H2SO4, HNO3, H3PO4, or acrylic acid. The charge transport properties of these polymeric materials have been studied in detail because of their potential application in gas sensors. In the current work, varieties of conducting polymer based materials such as PANI-ES/Cloi
APA, Harvard, Vancouver, ISO, and other styles
9

Vargha, Dora. Vaccination and the communist state: polio in Eastern Europe. Manchester University Press, 2017. http://dx.doi.org/10.7228/manchester/9781526110886.003.0004.

Full text
Abstract:
Through the case of Czechoslovakia and Hungary, this chapter explores the role of Eastern European states in polio prevention and vaccine development in the Cold War. Based on published sources and archival research, the chapter demonstrates that polio facilitated cooperation between the antagonistic sides to prevent a disease that equally affected East and West. Moreover, it argues that Eastern Europe was seen – both by Eastern European states and the West - as different when it came to polio prevention, since the communist states were considered to be particularly well suited to test and suc
APA, Harvard, Vancouver, ISO, and other styles
10

Gardiner, Matthew D., and Neil R. Borley. Colorectal surgery. Oxford University Press, 2012. http://dx.doi.org/10.1093/med/9780199204755.003.0005.

Full text
Abstract:
This chapter begins by discussing the basic principles of gastrointestinal embryology, gastrointestinal anatomy, and intestinal stomas,before focusing on the key areas of knowledge, namely abdominal wall hernias, Crohn’s disease, ulcerative colitis, diverticular disease, colorectal polyps, colorectal cancer, haemorrhoids, fissure in ano, perianal infection and fistula-in-ano, and other anorectal conditions. The chapter concludes with relevant case-based discussions.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Based Polyol"

1

Zhang, Yi-xin, Jing Xu, Zai-ming Wang, et al. "Research and Performance Evaluation of Polyol Based Drilling Fluid." In Springer Series in Geomechanics and Geoengineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1964-2_413.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chen, Qizhi. "Poly(Polyol Sebacate)-Based Elastomeric Nanobiomaterials for Soft Tissue Engineering." In Biomedical Materials and Diagnostic Devices. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118523025.ch17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Matějka, Zdenek, Helena Parschová, Pavla Ruszová, et al. "Selective Uptake and Separation of Oxoanions of Molybdenum, Vanadium, Tungsten, and Germanium by Synthetic Sorbents Having Polyol Moieties and Polysaccharide-Based Biosorbents." In Fundamentals and Applications of Anion Separations. Springer US, 2004. http://dx.doi.org/10.1007/978-1-4419-8973-4_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mirhendy, Prandhito Hasri, Fahmi Mubarok, and Heru Mirmanto. "Influence of Additives on the Physical and Mechanical Properties of Rapeseed Oil Polyol-Based Rigid Polyurethane Foam as an Artificial Bone Model." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-97-7898-0_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Graiver, D., K. W. Farminer, and R. Narayan. "Soybean-Based Polyols and Silanols." In ACS Symposium Series. American Chemical Society, 2014. http://dx.doi.org/10.1021/bk-2014-1178.ch007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Karch, Oliver, Hartmut Noltemeier, and Thomas Wahl. "Robot Localization Using Polygon Distances." In Sensor Based Intelligent Robots. Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/10705474_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Matsushima, Kyoji. "The Polygon-Based Method." In Series in Display Science and Technology. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-38435-7_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Yebo, Xiaolan Luo, and Shengjun Hu. "Introduction to Bio-based Polyols and Polyurethanes." In SpringerBriefs in Molecular Science. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-21539-6_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Yebo, Xiaolan Luo, and Shengjun Hu. "Lignocellulosic Biomass-Based Polyols for Polyurethane Applications." In SpringerBriefs in Molecular Science. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-21539-6_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Yebo, Xiaolan Luo, and Shengjun Hu. "Polyols and Polyurethanes from Protein-Based Feedstocks." In SpringerBriefs in Molecular Science. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-21539-6_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Based Polyol"

1

Hellems, Steve, John Willhite, and Ramesh Subramanian. "Bio Based Waterborne Floor Coatings with Enhanced Flow, Appearance, and Early Hardness Development." In SSPC 2015 Greencoat. SSPC, 2015. https://doi.org/10.5006/s2015-00026.

Full text
Abstract:
Abstract The use of sustainable materials in the flooring market has gained widespread interest in recent years. Bio based raw materials contribute significantly to these efforts and are used to prepare environmentally friendly coatings. Castor oil based emulsions are used as polyols in waterborne polyurethane coatings. These systems have outstanding chemical resistance and good durability. But they have inherent issues like very short pot life, poor appearance / flow properties, and delayed early hardness development. In this paper the development of a new castor oil based polyol emulsion tha
APA, Harvard, Vancouver, ISO, and other styles
2

Fernando, Luis G. "Application Study on the Performance of Polyurethane Paint as a Green Coat Using Biobased Coconut Polyol Resin for Protective, Marine and Industrial Coatings." In SSPC 2011. SSPC, 2011. https://doi.org/10.5006/s2011-00019.

Full text
Abstract:
Abstract This paper describes the performance properties of coconut-based polyol resin used in polyurethane coating systems compared with commercially available polyurethane paints which use petroleum-based acrylic or polyester polyol resins, in terms of physical and corrosion properties under accelerated laboratory weather conditions. The studies also show the chemical resistance and protection properties from the discoloration effects of ultraviolet (UV) light on the painted metal test panel substrate specifically cold rolled steel. The developed polyurethane coatings were applied as a prime
APA, Harvard, Vancouver, ISO, and other styles
3

Falope, Funmilola Y., Paul M. Osamudiamen, Oyinlola R. Obanla, Nathaniel Y. Illesami, and Adegboyega P. Adeoye. "Preparation and Characterisation of Rigid Polyurethane Foam from Terminalia catappa (Tropical Almond) seed oil-based polyol." In 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG). IEEE, 2024. http://dx.doi.org/10.1109/seb4sdg60871.2024.10630072.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Farzaneh, Amir Farrokh, Martin Olofsson, and Eva Gustavsson. "Aging and Air Infusion Effects on the Performance and Longevity of Polyol Ester-Based Immersion Cooling Fluids for Data Centers." In 2025 IEEE International Conference on Dielectric Liquids (ICDL). IEEE, 2025. https://doi.org/10.1109/icdl63868.2025.11068238.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nava, Hildeberto, and Nelson Douglass. "High Strength One Component Hybrid Urethane Resin System for Infrastructure Applications." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05511.

Full text
Abstract:
Abstract In recent years Urethane Hybrid systems have become very important in the growth of the thermosetting plastics industry. Their practical economical and technical advantages have made it easier for their implementation in conventional molding practices. Their adaptability to common formulations where unsaturated polyester or urethanes are used, provide simple systems that can be processed with fast reaction times and high filler loadings. The resultant products can be designed to have excellent toughness and elongation compared to common unsaturated polyesters. Typically, Polyurethane
APA, Harvard, Vancouver, ISO, and other styles
6

Rahman, Mohammad Mizanur. "Biodegradable Antifouling Coating." In MPWT 2019. NACE International, 2019. https://doi.org/10.5006/mpwt19-15293.

Full text
Abstract:
Abstract Due to the regulations of toxic biocidal products in marine environments, the development of nontoxic antifouling (AF) coatings has become required. The development of nontoxic antifouling formulations implies the use of ingredients (such as: polymers, additives and pigments) that are devoid of toxicity towards marine environments. In this regard, erodible coatings, based on biodegradable polymer, are used to respond to this problem. Recently, polyurethane (PU) has been adopted into antifouling coating due to its ability to migrate the certain functional groups which resist the attach
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Fan, Pin Wang, Yaping Zhang, et al. "A comprehensive evaluation of polygon-based hologram algorithms." In Holography, Diffractive Optics, and Applications XIV, edited by Changhe Zhou, Liangcai Cao, Ting-Chung Poon, and Hiroshi Yoshikawa. SPIE, 2024. http://dx.doi.org/10.1117/12.3036200.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kote, Prashant, Magdalen Asare, Sahilkumar Chaudhary, Tim Dawsey, and Ram Gupta. "Flame Retardant Polyurethane Foams Using Vegetable Oil-based polyol." In 2022 AOCS Annual Meeting & Expo. American Oil Chemists' Society (AOCS), 2022. http://dx.doi.org/10.21748/iefv6816.

Full text
Abstract:
Polyurethanes can be used in many applications by modifying their properties via facile methods. Most of the polyurethanes currently used for industrial applications originated from petrochemical-based chemicals. There is a growing demand in industries to use renewable resources for polyurethanes. Vegetable oil-based polyurethanes have shown properties comparable to that of petroleum-based polyurethanes. In this research, sunflower oil was used as a renewable resource for polyurethanes. Rigid polyurethane foams were prepared using sunflower-based polyols. The polyols were synthesized via epoxi
APA, Harvard, Vancouver, ISO, and other styles
9

Lim, Hyun-Ok, Geong-Mi Bark, and Nam-Ju Jo. "Actuators based on polyurethanes with different types of polyol." In International Conference on Smart Materials and Nanotechnology in Engineering. SPIE, 2007. http://dx.doi.org/10.1117/12.780141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Montag, Petr, and Alena Kalendova. "INVESTIGATION OF RECYCLED POLYOL PRODUCED FROM SEMI-RIGID POLYURETHANE FOAM OUTSOURCED FROM THE AUTOMOTIVE INDUSTRY." In 23rd SGEM International Multidisciplinary Scientific GeoConference 2023. STEF92 Technology, 2023. http://dx.doi.org/10.5593/sgem2023/4.1/s18.22.

Full text
Abstract:
Polyurethane, as a versatile polymer prepared by the polyaddition of isocyanates and hydroxyl group containing compounds, is widely used in the automotive industry and with an upcoming change of European legislation becomes recycling increasingly important as an alternative to landfilling or incineration. Glycolysis is one of the chemical degradation processes used to transform polyurethane waste using simple glycols as the degradation agents into a raw material. Single phase glycolysis was used to produce recycled polyol from polyurethane semi-rigid foam dedicated for headliner production. Th
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Based Polyol"

1

Hills, R. G., P. D. Meyer, and M. L. Rockhold. PolyRES: A polygon-based Richards equation solver. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/179180.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Simmons, Jane M. Performance Analysis of Poll-Based Retransmission Schemes. Defense Technical Information Center, 1993. http://dx.doi.org/10.21236/ada459502.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pray, Todd. Identification and characterization of an oleaginous microalgal base strain for use in bio-based poly-urethane production. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1631730.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gan, Charles, Melissa Pitton, Jolinda de Korne, et al. Wastewater-based poliovirus surveillance using digital PCR. Swiss Federal Institute of Aquatic Science and Technology, Eawag, 2025. https://doi.org/10.55408/eawag:34819.

Full text
Abstract:
Poliovirus is the causative agent of poliomyelitis, a potentially debilitating disease that is a target for global eradication. Vaccination against poliomyelitis is an important tool in the eradication effort, but one of the available vaccines, the oral poliovirus vaccine, contains live, attenuated strains that can revert to virulent forms. Community transmission of so-called vaccine-derived polioviruses (VDPVs) can contribute to outbreaks, including in areas with no recently reported poliomyelitis cases. Wastewater-based surveillance (WBS) is a widely applied method to monitor communities for
APA, Harvard, Vancouver, ISO, and other styles
5

Scurtescu, M., M. Ansari, and A. Nadalin. Poll-Based Security Event Token (SET) Delivery Using HTTP. Edited by A. Backman and M. Jones. RFC Editor, 2020. http://dx.doi.org/10.17487/rfc8936.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fernando, P. U. Ashvin Iresh, Rebecca Crouch, Bobbi Stromer, Travis Thornell, Johanna Jernberg, and Erik Alberts. Scaled-up synthesis of water-retaining alginate-based hydrogel. Engineer Research and Development Center (U.S.), 2023. http://dx.doi.org/10.21079/11681/48032.

Full text
Abstract:
Synthesis of a scaled-up version of a lithium-ion-based alginate/poly(acrylamide-co-stearyl methacrylate) [Li-alginate/P(AAm-co-SMA)] hydrogel with several optimizations for thermal signature investigations on various environmental substrates.
APA, Harvard, Vancouver, ISO, and other styles
7

Mays, Jimmy W. Poly(cyclohexadiene)-Based Polymer Electrolyte Membranes for Fuel Cell Applications. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1008339.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yoncheva, Krassimira, Dimitar Galabov, Nadya Hristova-Avakumova, Vera Hadjimitova та Petar Petrov. Poly(ε-Caprolactone) Based Nanocarriers of Kaempferol: a Comparative Study. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, 2019. http://dx.doi.org/10.7546/crabs.2019.03.07.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Karst, Adèle, Michel Bouquey, Jérémie Soulestin, Cédric Samuel, and Thibault Parpaite. Formulation of highly electro-conductive thermoplastic composites using PEDOT-based fillers with controlled shape factor. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.gs.pc.2.

Full text
Abstract:
The objective of this study is to develop a new conductive thermoplastic material with superior electrical properties. Currently, conductive polymers are typically filled with carbon or metallic particles [1]. However, these filled thermoplastics exhibit drawbacks such as high rigidity, toxicity, and high viscosity [2]. An alternative approach investigated in this work is to substitute these fillers with intrinsically conductive polymers like Poly(3,4-ethylenedioxythiophene) (PEDOT). PEDOT can achieve exceptional electrical conductivities (over 1000 S.cm-1) when combined with polymeric dopants
APA, Harvard, Vancouver, ISO, and other styles
10

Marks, Tobin J., and Stephen H. Carr. PBT (Poly(p-phenylenebenzobisthiazole)) PBO (Poly(p-phenylenebenzobisoxazole))-Based Hybrid Polymers with Nonlinear Optical Properties or High Electrical Conductivity. Defense Technical Information Center, 1986. http://dx.doi.org/10.21236/ada177213.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Based Polyol' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography