Relevant bibliographies by topics / Batch testing

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Batch testing'

Author: Grafiati
Published: 4 June 2021
Last updated: 11 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Batch testing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Batch testing"

1

Li, Ming, and Necip Doganaksoy. "Batch Variability in Accelerated-Degradation Testing." Journal of Quality Technology 46, no. 2 (2014): 171–80. http://dx.doi.org/10.1080/00224065.2014.11917961.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dabney, John, and Brian C. Dean. "An Efficient Algorithm for Batch Stability Testing." Algorithmica 58, no. 1 (2009): 52–58. http://dx.doi.org/10.1007/s00453-009-9320-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

De Keuckelaere, Ann, Dan Li, Bart Deliens, Ambroos Stals, and Mieke Uyttendaele. "Batch testing for noroviruses in frozen raspberries." International Journal of Food Microbiology 192 (January 2015): 43–50. http://dx.doi.org/10.1016/j.ijfoodmicro.2014.09.024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Katehis, D., J. Fillos, and L. A. Carrio. "Comparison of bench scale testing methods for nitrifier growth rate measurement." Water Science and Technology 46, no. 1-2 (2002): 289–95. http://dx.doi.org/10.2166/wst.2002.0491.

Full text
Abstract:
The maximum specific nitrifier growth rate was determined for two wastewater treatment plants (WWTPs) using sequencing batch reactors (SBRs) and high F/M exponential growth batch tests. Higher nitrifier growth rates were obtained from the exponential growth batch tests. Operating SRT and aeration mode (fully aerobic versus anoxic/aerobic) significantly impacted the nitrifier's growth rate in the SBRs with lower SRT and anoxic/aerobic operation resulting in higher specific nitrifier growth rates.
APA, Harvard, Vancouver, ISO, and other styles
5

Meechoowas, Ekarat, Konnika Tui-Ai, Kanit Tapasa, Usuma Naknikham, and Tepiwan Jitwatcharakomol. "Increasing the Melting Ability of Glass Batch by Batch Modification." Advanced Materials Research 770 (September 2013): 128–31. http://dx.doi.org/10.4028/www.scientific.net/amr.770.128.

Full text
Abstract:
The soda-lime glass with the composition of 74SiO2-18Na2O-6CaO-B2O3-Al2O3 thermodynamically requires the exploited heat of 557 kW/ ton of glass to transform raw materials into glass. The objective of this project is to modify the soda-lime glass batch by using wollastonite instead of limestone and pyrophyllite instead of aluminium hydroxide. The exploited heat of the batch with wollastonite is reduced to 546 kW/ton of glass while the batch with wollastonite and pyrophyllite is decreased to 550 kW/ton of glass. According to Batch-Free Time testing, it is found that the melting ability of both modified batches is higher than of the original batch, while the properties of glass are slightly changed. This implies that the modified batch requires a lower melting energy than the original batch.
APA, Harvard, Vancouver, ISO, and other styles
6

Daldal, Rebi, Iftah Gamzu, Danny Segev, and Tonguç Ünlüyurt. "Approximation algorithms for sequential batch-testing of series systems." Naval Research Logistics (NRL) 63, no. 4 (2016): 275–86. http://dx.doi.org/10.1002/nav.21693.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Grady, Lee T. "Third Generation Dissolution Testing: Dissolution as a Batch Phenomenon." Drug Information Journal 30, no. 4 (1996): 1063–70. http://dx.doi.org/10.1177/009286159603000423.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Singh, Atul, Margaret Houlihan, Asli Y. Dayioglu, and Ahmet H. Aydilek. "Batch leaching testing of stabilized dredged bottom-sea sediments." Journal of Soils and Sediments 20, no. 10 (2020): 3793–806. http://dx.doi.org/10.1007/s11368-020-02646-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Chenxi, Pin-Han Ho, and Janos Tapolcai. "On batch verification with group testing for vehicular communications." Wireless Networks 17, no. 8 (2011): 1851–65. http://dx.doi.org/10.1007/s11276-011-0383-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jia, Dongdong, Sumei Zhang, and Gengsheng Zhang. "Erasure combinatorial batch codes based on nonadaptive group testing." Designs, Codes and Cryptography 87, no. 7 (2018): 1647–56. http://dx.doi.org/10.1007/s10623-018-0564-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Batch testing"

1

寧華 and Hua Ning. "The origins of recrystallisation textures in batch annealing steels." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1999. http://hub.hku.hk/bib/B31240859.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Peeples, Johanna Louise. "Design and Testing of Thermosyphon Batch Targets for Production of F-18." NCSU, 2008. http://www.lib.ncsu.edu/theses/available/etd-03102008-134824/.

Full text
Abstract:
F-18 is a short-lived radioisotope commonly used in Positron Emission Tomography (PET). This radionuclide is typically produced through the O-18(p,n)F-18 reaction by proton bombardment of O-18 enriched water. Thermosyphon batch targets have been proposed as a means to increase F-18 production due to their enhanced heat rejection capabilities. These boiling targets have been operated with up to 3.2 kW of beam power with manageable O-18 enriched water volumes. The primary purpose of this work has been to develop a fundamental approach to target design from a modeling perspective, and to implement this approach to design new thermosyphon targets with enhanced production capabilities. Computational methods have been developed to predict target thermal performance and have been validated with experimental test data from the Duke University Medical Cyclotron and the Wisconsin Medical Cyclotron. These methods have been used to design a new production target for the Duke cyclotron with enhanced F-18 production capabilities. Low volume test targets have been successfully operated at the Wisconsin cyclotron with beam powers in excess of the desired 1.6 kW.
APA, Harvard, Vancouver, ISO, and other styles
3

Sasser, Shawn. "The Design and Testing of a Novel Batch Photocatalytic Reactor and Photocatalyst." Scholar Commons, 2016. http://scholarcommons.usf.edu/etd/6381.

Full text
Abstract:
With an ever-increasing human population, the importance in having sustainable energy resources is becoming increasingly evident, as the current energy habits have brought about massive atmospheric pollution in the form of CO2 emissions, resulting in a rise in the average global temperature. To battle the effects of climate change, many alternative energy resources have been investigated. Among these, photocatalytic conversion of CO2 to renewable hydrocarbon fuels such as methane and methanol is one of the most desirable, as it provides the opportunity to utilize the sun’s energy to convert CO2 to renewable fuels. The work in this study is primarily focused on developing a batch photoreactor system to improve the integrity of photocatalytic experiments and using that system to test the performance of Er-doped solid solutions of ZnO/GaN (ZG) towards photocatalytic reduction of CO2. To upgrade the abilities from previous photoreactor systems, a novel photoreactor was deigned in SolidWorks and fabricated in-house. The photoreactor was designed to increase surface area at the gas-solid interface, improve utilization of the light source, and promote larger mass transfer rates of reactants to the catalyst surface. These goals were accomplished by immobilizing the catalyst on a transparent porous support, incorporating a threaded mount on top of the photoreactor for mounting an interchangeable LED to illuminate the catalyst bed, and recirculating the gas mixture through a closed loop system with a compressor, respectively. Pure and Er-doped ZG photocatalyst samples were synthesized through the nitridation of Zn/Ga/CO3 layered double hydroxide (LDH) precursors. Erbium was chosen as a dopant to potentially enhance the photocatalyst by utilizing its upconversion photoluminescence properties. The LDH precursors were synthesized using a coprecipitation method. Levels of erbium doping were varied by [Er]/[Zn] = 0, 0.025, 0.05, and 0.10. ZnO/GaN solid solutions were chosen for their low bandgap energy so that visible light, roughly 40% of the solar spectrum [1], can be used to activate the catalyst. Diffuse reflectance spectroscopic data of the pure and Er-doped ZG samples were measured and used to calculate the bandgap energy. Bandgap values of EG = 2.53, 2.52, 2.56, and 2.56 eV were obtained for the [Er]/[Zn] = 0, 0.025, 0.05, and 0.10 samples, respectively. XRD data of the LDH samples indicated the formation of Zn/Ga/CO3 LDH and the Zn(OH)2, β-Ga2O3, α-GaOOH, and ZnGa2O4 impurity phases. Moreover, the broadening of the diffraction peaks in the Er-doped LDH samples suggested Er3+ ions substituted the Ga3+ ions in the LDH structure. XRD data of the pure and Er-doped ZG samples revealed strong peaks at 2θ = 31.86, 34.37, and 36.31°, indicating the formation of a solid solution of ZnO and GaN. Additionally, peaks at 2θ = 29.27, 48.79, and 57.86° indicate the formation of the secondary phase of Er2O3 in the Er-doped samples. Consequently, it was concluded that the Er3+ ions did not go into the crystal structure of the oxynitride solid solution. These findings were supported by the SEM images revealing hexagonal nanoplates and nanoprisms that coincide with the solid solution along with additional nanostructures corresponding to the Er2O3 phase. During photocatalytic experiments with the pure and Er-doped ZG samples, CO2, and UV light (405 nm nominal wavelength), hydrocarbon production was observed to increase with increasing [Er/Zn]. However, results from control experiments with no catalyst while varying the nominal LED wavelength and the o-ring material suggested that hydrocarbon formation was partially or entirely the result of the o-ring photochemically degrading in the presence of UV light. An o-ring comprised of a silicone material yielded zero hydrocarbon formation in the presence of UV light, while this was not the case for o-ring materials of Viton® and Kalrez®. These findings can be applied to other research groups that plan to perform photocatalytic experiments in a photoreactor with o-rings while using a UV light source.
APA, Harvard, Vancouver, ISO, and other styles
4

Humphryes, Phillip. "Replacement of hamsters with physiochemical analytical methods fo leptospira vaccine batch potency testing." Thesis, University of London, 2012. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.589609.

Full text
Abstract:
The current batch potency test for Leptospira interrogans serovar Canicola vaccines requires the use of a large number of hamsters and has severe effects; whilst effective, a safer, cheaper, more ethical replacement is desired. The aim of this study was to determine the common components of commercially available serovar Canicola vaccines to aid development of an in vitro potency test; lipopolysaccharide and protein were chosen for analysis due to their known immunogenic properties. Analysis of five serovar Canicola vaccines (A-E) using the Limulus amebocyte lysate assay and silver stained sodium dodecyl sulfate polyacrylamide gels, indicated that lipopolysaccharide was not detectable in all vaccines tested preventing it from being a suitable biomarker for an in vitro test. Therefore the protein contents of vaccines A-E were determined by two dimensional liquid chromatography mass spectrometry (22l±3l, 9±8, 34±4, 2l±5 and 34±17 proteins [mean ± 1 standard deviation] found respectively) to identify conserved proteins. The outer membrane protein LipL32 was shown to be common to vaccines A-E and to be present at a significantly higher (p:S 0.05) relative spectral abundance in a batch of vaccine which passed the in vivo potency test, compared to one which failed. Quantitative analysis using multiple reaction monitoring determined that the concentration of the N terminus of LipL32 was significantly lower (p:S 0.01) in failed batches (n=Z) of vaccine compared to passed batches (n=Z); the concentration of the C terminus was relatively uniform. The protective effect of LipL32 against serovar Canicola was subsequently investigated in hamsters. Decreased kidney invasion was observed in groups vaccinated with LipL32 prior to challenge suggesting that LipL32 may be an active component of vaccines A-E. With additional supportive data, beyond the scope of this study, quantitative analysis of N terminal LipL32 has the potential to form an in vitro vaccine potency test.
APA, Harvard, Vancouver, ISO, and other styles
5

Hanssen, Seferidis Johan. "Geoexplorer : A free open-source framework for black-box testing and scraping information from geographic services." Thesis, Linköpings universitet, Institutionen för datavetenskap, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-106632.

Full text
Abstract:
This is a report on the development of a free open-source framework. The framework is meant to be used to mainly black-box test and/or scrape information from a geographic service like Google Places, Facebook Places or Foursquare. In reality any service that is based on geographic coordinates can be used with the framewok. Amongst others, the framework offers functionalities like visualisation on-the-fly and logging of different aspects of the service. There are a few similar tools scattered on the world-wide web, but they usually are hard to find and if they are found, they either are not open-source, free or they lack in functionality. Another major drawback is that the available solutions are very generic, and thus limiting their capabilities. The work described here is an attempt for a concise, easy to use, extendible framework solely focused on geographic services. In this report, the technologies used are demonstrated, while at the same time the reasons are given as to why a specific technology was selected in each case. Some documentation is also presented and a few references to the actual code-base in case someone wants to extend Geoexplorer or use it at their organization.
APA, Harvard, Vancouver, ISO, and other styles
6

Hodges, Stanley Keith. "Forensic Gunshot Residue Distance Determination Testing Using Identical Make and Model Handguns and Different Ammunitions." Digital Commons @ East Tennessee State University, 2008. https://dc.etsu.edu/etd/1915.

Full text
Abstract:
The determination of how far a firearm was from a victim or target when it was discharged is a frequent request to crime laboratories. This determination requires test firing the firearm at various distances to compare gunshot residue patterns made during the test with patterns on the victim or target. Crime laboratories stipulate that the same firearm and ammunition used in commission of the crime must be used for this testing; however, little empirical evidence exists supporting this requirement. It was the purpose of this study to determine if there were any significant differences using different firearms and different ammunition in distance determination testing. The findings indicated that no significant differences occurred with different firearms but there were significant differences with different brands of ammunition.
APA, Harvard, Vancouver, ISO, and other styles
7

Sommer, Andreas [Verfasser], Ansgar [Akademischer Betreuer] Steland, and Wolfgang [Akademischer Betreuer] Kössler. "Lot Acceptance and Change-Point Testing for the Process Mean and Quality Level under Dependent Batch and Panel Based Sampling Designs / Andreas Sommer ; Ansgar Steland, Wolfgang Kössler." Aachen : Universitätsbibliothek der RWTH Aachen, 2017. http://d-nb.info/1162451408/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Santos, Liliana Dutra dos. "Remoção de íons Zn2+ por adsorção em carvão ativado em batelada e processo contínuo." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2014. http://hdl.handle.net/10183/110084.

Full text
Abstract:
O zinco é um dos metais mais utilizados nos processos de tratamento de superfícies. Os efluentes contaminados com zinco, gerados nestes processos, trazem preocupação devido ao grande volume, elevada toxicidade, acumulação e persistência. O presente estudo avaliou a remoção de íons zinco de soluções aquosas, por adsorção em carvão ativado comercial, através de experimentos em batelada e em escala piloto. Ensaios em batelada objetivaram estudar a influência dos parâmetros de processo pH, tempo de contato e concentração de sólido adsorvente na remoção de íons Zn2+ a partir de uma solução com concentração inicial de 10 mg.L-1. A partir das melhores condições encontradas, a isoterma de equilíbrio do sistema foi construída e o ajuste dos dados experimentais aos modelos não lineares de Langmuir, Freundlich, Redlich-Peterson e Sips foi verificado. Ensaios em planta piloto foram realizados a fim de identificar a curva de ruptura do sistema. No processo de adsorção contínuo em leito fixo, foram avaliadas diferentes condições operacionais, variando-se a vazão de alimentação (15 e 20 mL.min-1) e a massa de adsorvente utilizada como recheio do leito (10, 13, 20 e 40 g). Os resultados apontaram como parâmetros ótimos de adsorção: pH igual a 6, tempo de contato de 30 min e concentração de sólido adsorvente de 20 g.L-1. O modelo de Sips apresentou o melhor ajuste dentre os modelos matemáticos estudados. O experimento realizado em planta piloto utilizando-se uma vazão de 15 mL.min-1 e massa de sólido sorvente de 40 g, obteve os melhores resultados dentre as condições analisadas, apresentando tempo de ruptura e exaustão do leito aos 5 e 90 min, respectivamente.<br>Zinc is one of the most used metals in surface treatment processes. The effluents contaminated with zinc, generated in these processes, bring concern due to the large volumes, high toxicity, persistence and accumulation. This study evaluated the removal of zinc ions from aqueous solutions, through adsorption by commercial activated carbon, using continuous (pilot plant) and bench scale. The batch experiments studied the influence of pH, contact time and adsorbent concentration in the removal of Zn 2+ ions from a solution with initial concentration of 10 mg.L-1. After achieving the best process parameters, the system’s equilibrium isotherm was constructed, and the fit of experimental data to the nonlinear Langmuir, Freundlich, Redlich-Peterson and Sips models was verified. Pilot plant tests were carried out in order to identify the system’s breakthrough curve. In the continuous fixed bed adsorption process, different operating conditions were evaluated by varying the feed flow (15 and 20 mL.min-1) and the mass of adsorbent material used as filling (10, 13, 20 and 40 g). The results showed as the optimum parameters for adsorption: pH 6, contact time of 30 min and adsorbent concentration of 20 g.L-1. The Sips model presented the best fit among the mathematical models studied. The experiment conducted in a pilot plant, using a flow rate of 15 mL.min-1 and solid adsorbent mass of 40 g, had the best results among the examined conditions, with breakthrough and exhaust times of 5 and 90 min, respectively.
APA, Harvard, Vancouver, ISO, and other styles
9

Carlborg, Christian, and Claesson Ludvig Renman. "Opportunism vid nedskrivningsprövning av goodwill? : En kritisk studie av tidigare angivna förklaringar till avvikelser mellan en genom CAPM beräknad diskonteringsränta och den av företaget redovisade, vid nedskrivningsprövning av goodwill." Thesis, Uppsala universitet, Företagsekonomiska institutionen, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-167711.

Full text
Abstract:
År 2005 implementerades IFRS 3 och IAS 36 i Sverige. I och med detta genomför företag nedskrivningsprövningar av goodwill. Dessa kan inbegripa nuvärdesberäkningar av framtida kassaflöden. Forskarna Carlin och Finch utförde år 2009 en studie på australiensiska börsnoterade företag för att undersöka om diskonteringsräntor, vilka används vid en nedskrivningsprövning, sätts opportunistiskt. Studien genomfördes genom att de visade på förekomsten av avvikelser mellan diskonteringsräntan som företagen redovisat och en av forskarna estimerad teoretisk diskonteringsränta beräknad genom the Capital Asset Pricing Model [CAPM]. Carlin och Finch hävdar att användandet av diskonteringsräntor vilka avvek mer än 150 räntepunkter från de teoretiska diskonteringsräntorna inte kan förklaras av estimeringsfel och därmed är i linje med opportunistiskt beteende. Det har presenterats olika former av opportunism som förklaring till dessa avvikande diskonteringsräntor. Dessa inbegriper opportunistiskt beteende genom earnings managagement i form av big bath och income smoothing. Denna studie undersöker om avvikande diskonteringsräntor förekommer och om förklaringarna presenterade av Carlin och Finch har bärighet år 2010 för företag noterade på Nasdaq OMX Stockholm. Detta genom att använda samma metod som Carlin och Finch gällande beräknandet av teoretiska diskonteringsräntor för att sedan relatera detta till resultatutveckling och faktiskt utförd goodwillnedskrivning. Denna studie visar att avvikelser mellan företagens redovisade och en genom CAPM beräknad teoretisk diskonteringsränta tycks vara vanligt förekommande och att avvikelser som kan förklaras av big bath förekommer, detta tycks dock vara ovanligt. Ingen avvikelse mellan redovisad och teoretisk diskonteringsränta kan påvisas som kan förklaras av opportunistiskt beteende genom income smoohting i syfte att dämpa resultat. Vidare framför denna studie kritik av tidigare studiers slutsatser om förekomst av agerande i linje med opportunism då redovisad diskonteringsränta avviker från en genom CAPM beräknad diskonteringsränta.<br>In 2005 IFRS 3 and IAS 36 were implemented in Sweden. As of this companies perform impairment testing of goodwill. These impairment tests may include discounted cash flow analyses. The researchers Carlin and Finch conducted a study in 2009 of Australian listed companies to investigate if the discount rates used in these impairment tests possibly were used opportunistically. They did this by demonstrating deviations between the discount rates that companies reported and discount rates calculated by the researchers using the Capital Asset Pricing Model [CAPM]. Carlin and Finch argues that reported discount rates that deviated more than 150 basis points from the estimated discount rates cannot be explained by estimation error and is thus consistent with opportunistic behavior. Explanations were presented by Carlin and Finch concerning the occurrence of these deviations. These include earnings management in the form of big bath and income smoothing.   This study examines whether deviating discount rates occur and if the explanations presented by Carlin and Finch can be documented for companies listed on Nasdaq OMX Stockholm in 2010. This is conducted by using the same method as Carlin and Finch regarding the calculation of the discount rates. Further this is related to earnings and actual performed goodwill impairments. This study shows that deviations between reported discount rates and theoretical discount rates, estimated by CAPM, are prevalent and that these deviations may have been motivated by big bath, though this appears to be unusual. No deviations between reported and theoretical discount rates can be shown that can be explained by opportunistic behavior by conducting income smoothing to dampen earnings. Furthermore, in this study criticism is put forth of earlier studies’ conclusions concerning behavior consistent with opportunism explaining deviations between reported and theoretical discount rates calculated using CAPM.
APA, Harvard, Vancouver, ISO, and other styles
10

Bach, Anna Verena [Verfasser], and Hajo [Akademischer Betreuer] Hamer. "Prognostische Relevanz der neuropsychologischen Testung, des Wada-Tests und der funktionellen transkraniellen Dopplersonographie für postoperative Sprach- und Gedächtnisdefizite nach epilepsiechirurgischen Eingriffen am Temporallappen / Anna Verena Bach geb. Balzer. Betreuer: Hajo Hamer." Marburg : Philipps-Universität Marburg, 2011. http://d-nb.info/1013288297/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Batch testing"

1

Ginley, Douglas M. The development of a performance test procedure and measurement technique in a batch mixing system. U.S. Dept. of Commerce, National Bureau of Standards, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ginley, Douglas M. The development of a performance test procedure and measurement technique in a batch mixing system. U.S. Dept. of Commerce, National Bureau of Standards, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sorini, Susan S. Development and validation of a standard test method for sequential batch extraction of waste with acidic extraction fluid. ASTM Institute for Standards Research, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

McDonald, Willie E. Performance of electric and microwave batch plant moisture meters in determining the moisture contents of fine-aggregate materials for concrete production. U.S. Army Engineer Waterways Experiment Station, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Scott, Liliana. Kombucha Home Brewing Logbook: Kombucha Brew Journal with Result and Testing Notebook, Scoby Tracker and Recipe Notebook, Die Cut Label Tags in Every Batch. Independently Published, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gianfranca, Balestra, Crowley Leslie-Anne, and Ní Dhuibhne Éilís 1954-, eds. Testi, intertesti, contesti: Seminario su "The wife of Bath" di Éilís Ní Dhuibhne. Vita e pensiero, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Batch testing"

1

Rosenof, Howard P., and Asish Ghosh. "Testing." In Batch Process Automation. Springer US, 1987. http://dx.doi.org/10.1007/978-1-4684-6641-6_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Minella, Michael T. "Testing Batch Processes." In Pro Spring Batch. Apress, 2011. http://dx.doi.org/10.1007/978-1-4302-3453-1_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Minella, Michael T. "Testing Batch Processes." In The Definitive Guide to Spring Batch. Apress, 2019. http://dx.doi.org/10.1007/978-1-4842-3724-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zaverucha, Gregory M., and Douglas R. Stinson. "Group Testing and Batch Verification." In Lecture Notes in Computer Science. Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-14496-7_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pazhayattil, Ajay, Naheed Sayeed-Desta, Emilija Fredro-Kumbaradzi, Marzena Ingram, and Jordan Collins. "Stage 2A and 2B: Batch Determination, Sampling, and Testing Plan." In AAPS Introductions in the Pharmaceutical Sciences. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-27484-9_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bruze, Magnus. "The Use of Ultrasonic Bath Extracts in the Diagnostics of Contact Allergy and Allergic Contact Dermatitis." In Patch Testing Tips. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-45395-3_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"Batch Process Hot Dip Galvanizing." In Corrosion: Fundamentals, Testing, and Protection. ASM International, 2003. http://dx.doi.org/10.31399/asm.hb.v13a.a0003689.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Protti, Michele. "Review of Bath Salts on Illicit Drug Market." In Critical Issues in Alcohol and Drugs of Abuse Testing. Elsevier, 2019. http://dx.doi.org/10.1016/b978-0-12-815607-0.00021-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kankana Dewan, Sumi. "Device Diagnosing Health of Bovine." In Bovine Science [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.99286.

Full text
Abstract:
The research problem taken into consideration for study dealt with the design of a low cost hand-held ZnO based sensing device for testing blood serum of bovine (cow), to diagnose their health of liver and kidney by detecting four biological parameters in-situ. Zinc oxide nanoparticles were synthesised by chemical bath deposition method. Using transmission electron microscopy (TEM) and X-ray diffraction (XRD), the size of ZnO nanoparticles were determined. It shows a hexagonal wurtzite structure with an orientation along the direction (101). TEM images show various morphological changes of nanostructured ZnO. The average crystallite sizes of ZnO molecule is found to be 0.004 nm from XRD. The constituents of nano sized ZnO are found to be of Zn (57.27%), Cl (33.01%), C (8.04%) and O (1.68%) as obtained from EDS. The samples of blood serum of bovine, avian and caprine are characterised by transmission electron microscopy (TEM) and Benesphera Avantor Performance (Biochemistry Analyser). ZnO based sensing device is designed with the help of Arduino and Microsoft visual basic 6.0 version software. The resistance of blood serum is taken into consideration for carrying out the experiment. It has been measured after adding ZnO (1 μl) to blood serum of (1 ml) to detect four biological parameters – Serum glutamate pyruvate transaminase (SGPT), Serum glutamic-oxaloacetic transaminase (SGOT), Blood urea nitrogen (BUN) and creatinine of bovine more precisely. The device can indicate whether the blood serum of bovine have normal/diseased parameters. This device will also help the veterinarians in the field.
APA, Harvard, Vancouver, ISO, and other styles
10

Rauhut, Christoph, and Torsten Meyer. "‘Theory’ and systematic testings – Emil Mörsch, Carl bach and the culture of experimentation into reinforced concrete construction at the turn of the twentieth century." In Building Knowledge, Constructing Histories. CRC Press, 2018. http://dx.doi.org/10.1201/9780429506208-141.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Batch testing"

1

Chang, Fangzhe, Jennifer Ren, and Ramesh Viswanathan. "Optimal Resource Allocation for Batch Testing." In 2009 International Conference on Software Testing Verification and Validation (ICST). IEEE, 2009. http://dx.doi.org/10.1109/icst.2009.25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Medina-Ramos, Carlos, and Huber Nieto-Chaupis. "Testing Laguerre-Volterra model in a batch reactor." In 2010 IEEE International Conference on Industrial Technology. IEEE, 2010. http://dx.doi.org/10.1109/icit.2010.5472667.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mihaylov, Blagovest, Bengt Jaeckel, Juergen Arp, and Ralph Gottschalg. "Reduced Measurement Uncertainty in PV Module Batch Testing." In 2017 IEEE 44th Photovoltaic Specialists Conference (PVSC). IEEE, 2017. http://dx.doi.org/10.1109/pvsc.2017.8366197.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jang, Changsoo, Byeng Dong Youn, Suk-Jin Ham, and Bongtae Han. "Fine leak batch testing of multiple MEMS packages." In SPIE MOEMS-MEMS: Micro- and Nanofabrication, edited by Richard C. Kullberg and Rajeshuni Ramesham. SPIE, 2009. http://dx.doi.org/10.1117/12.810004.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wylde, Jonathan James, Melanie Reid, Alistair Kirkpatrick, Nihal Obeyesekere, and David Glasgow. "When To Batch and When Not To Batch: An Overview of Integrity Management and Batch Corrosion Inhibitor Testing Methods and Application Strategies." In SPE International Symposium on Oilfield Chemistry. Society of Petroleum Engineers, 2013. http://dx.doi.org/10.2118/164080-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chung, T. P., C. J. Liao, and L. H. Su. "Scheduling on identical machines with batch arrivals in semiconductor testing house." In 2008 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, 2008. http://dx.doi.org/10.1109/ieem.2008.4737887.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Roman, M., D. Selisteanu, E. Bobasu, and E. Petre. "Application of Bond Graph modeling on a fed-batch alcoholic fermentation bioprocess." In 2010 IEEE International Conference on Automation, Quality and Testing, Robotics (AQTR 2010). IEEE, 2010. http://dx.doi.org/10.1109/aqtr.2010.5520887.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Golob, Matthew, Clayton Nguyen, Sheldon Jeter, and Said Abdel-Khalik. "Solar Simulator Efficiency Testing of Lab-Scale Particle Heating Receiver at Elevated Operating Temperatures." In ASME 2016 10th International Conference on Energy Sustainability collocated with the ASME 2016 Power Conference and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/es2016-59655.

Full text
Abstract:
Particle Heating Receivers (PHR) offer a range of advantages for concentrator solar power (CSP). PHRs can facilitate higher operating temperatures (&gt;700°C), they can allow for inexpensive direct storage, and they can be integrated into cavity receiver designs for high collection efficiency. In operation, PHRs use solid particles that are irradiated and heated directly as they fall through a region exposed to concentrated sunlight. The heated particles can subsequently be stored in insulated bins, with the stored thermal energy reclaimed via heat exchanger to secondary working fluid for the power cycle in CSP. In this field Georgia Tech has over five years’ experience developing PHR technology through the support of the DOE SunShot program and similar research efforts. Georgia Tech has dealt with the crucial challenges in particle receiver technology: particulate flow behavior, particulate handling, and particulate heat transfer. In particular, Georgia Tech has specialized in innovative advances in the utilization and design of discrete structures in PHRs (DS-PHR) to prolong particulate residence time in the irradiated zone. This paper describes the development and results of lab-scale testing for DS-PHRs especially in the Georgia Tech high flux solar simulator (GTHFSS). The GTHFSS is a bank of high intensity xenon lamps with elliptical reflectors designed to replicate a concentrated solar source. Two series of tests have been undertaken: batch and continuous operation. Initially the DS-PHR has been tested in a batch apparatus in which a substantial but still limited quantity of preheated particulate flows through from an elevated bin through the irradiated PHR into a weighing box collecting bin. The use of a weighing box is advantageous since the flow rate of particulate is otherwise especially hard to measure. Temperature rise measurements and mass flow rate measurements allow calculation of energy collection rates. Calorimetry measurements, also described in the paper, are used to verify the incident concentrated radiation allowing the calculation of the collection efficiency. This preliminary series of experiments have been completed using the batch apparatus, with the efficiencies of the lab-scale DS-PHR being determined for a range of temperatures. Efficiencies above 90% have been measured at low temperatures roughly corresponding to the so-called optical efficiency, which is the rate of energy collection at low temperature and minimal heat loss. Batch experiment data indicates a collection efficiency of approximately 81–85% at an average particle operating temperature of 500°C. Lab-scale batch results at 700°C in proved to be unstable, and as such a rework employing a continuous recirculation loop is underway. While the batch apparatus is convenient for preliminary work, it is challenging to reach steady state operation in the mixing and measurement section below the DS-PHR, which limits this apparatus in higher temperature experiments. Consequently, the experiment is being reconfigured for continuous flow, in which the particulate will be heated and recirculated by a high temperature air conveyor. The advantage of the high temperature conveyor has already been proved by its successful integration as a heater and mixer in the hot bin of the batch apparatus. Such a compact device was also quite advantageous in the limited confines of a typical laboratory simulator such as the GTHFSS. While continuous flow prevents the exceedingly desirable use of an uninterrupted mass measurement device, highly accurate mass flow data is still expected based on the use of a perforated plate flow control station. This device relies on the Berverloo effect to maintain a constant flow of particulate through an array of orifices, for which the flow is largely independent of upstream conditions. A weighing box will be used to calibrate and verify the mass flow. This paper will report on efficiency measurements with the batch flow experiments and present the preliminary steps taken to conduct the recirculation experiment. The bulk the research reported in the paper is sponsored by and done in support of the DoE Sun Shot initiative.
APA, Harvard, Vancouver, ISO, and other styles
9

Zu, Theresah Korbieh N., Sanchao Liu, Elliot Gerlach, and Christian Sund. "Development and testing of a cell-free predictive model against Clostridium acetobutylicum batch fermentation." In Imaging Spectrometry XXII: Applications, Sensors, and Processing, edited by John F. Silny and Emmett J. Ientilucci. SPIE, 2018. http://dx.doi.org/10.1117/12.2321329.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lv, Yingjie, Ying Liu, Aofeng Li, and Wenjing Xu. "Designing and implementation of batch testing equipment for RF electronic seal of smart meter." In 3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015). Atlantis Press, 2015. http://dx.doi.org/10.2991/ic3me-15.2015.141.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Batch testing"

1

Fox, K., D. Miller, and B. Pickenheim. MELT RATE TESTING FOR SLUDGE BATCH 6. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/979692.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mattigod, Shas V., Elizabeth C. Golovich, Dawn M. Wellman, Elsa A. Cordova, and Ronald M. Smith. Uranium Adsorption on Ion-Exchange Resins - Batch Testing. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/1009765.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Parker, Kent E., Elizabeth C. Golovich, and Dawn M. Wellman. Uranium Adsorption on Granular Activated Carbon – Batch Testing. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1127293.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

WOODHAM, WESLEY, ANTHONY HOWE, and MATTHEW SIEGFRIED. SLUDGE BATCH 10 FLOWSHEET TESTING WITH NON-RADIOACTIVE SIMULANTS. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1821142.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

King, W. D., L. L. Hamm, T. L. Hang, and F. F. Fondeur. CST Batch Contact Equilibrium Testing of TCCR Tank 10H Batch 1 and 1A Waste Supernate Samples. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1510920.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mattigod, Shas V., Dawn M. Wellman, Elizabeth C. Golovich, Elsa A. Cordova, and Ronald M. Smith. Tc-99 Adsorption on Selected Activated Carbons - Batch Testing Results. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/1009764.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Reboul, S., and M. Stone. REAL WASTE TESTING OF SLUDGE BATCH 5 MELTER FEED RHEOLOGY. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/980761.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Miller, D., K. Fox, B. Pickenheim, and M. Stone. MELT RATE FURNACE TESTING FOR SLUDGE BATCH 5 FRIT OPTIMIZATION. Office of Scientific and Technical Information (OSTI), 2008. http://dx.doi.org/10.2172/940390.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

King, William, Kathryn Taylor-Pashow, Thong Hang, and Fernando Fondeur. CHARACTERIZATION AND CST BATCH CONTACT EQUILIBRIUM TESTING OF AGED TCCR TANK 10H BATCH 1A AND 2 PROCESS SUPERNATE SAMPLES. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1574676.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Parker, Kent E., Elizabeth C. Golovich, and Dawn M. Wellman. Iodine adsorption on ion-exchange resins and activated carbons: batch testing. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1163822.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography