Relevant bibliographies by topics / Bearing load / Books
To see the other types of publications on this topic, follow the link: Bearing load.

Books on the topic 'Bearing load'

Author: Grafiati
Published: 4 June 2021
Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 books for your research on the topic 'Bearing load.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse books on a wide variety of disciplines and organise your bibliography correctly.

1

Load bearing system. Birkhäuser, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Piggott, Michael R. Load bearing fibre composites. 2nd ed. MERP Enhanced Composites, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Load bearing fibre composites. 2nd ed. Kluwer Academic Publishers, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

1936-, Sinha B. P., and Davies S. R. 1925-, eds. Load bearing brickwork design. E. Horwood, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Piggott, Michael R. Load bearing fibre composites. 2nd ed. Kluwer Academic, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bertassoni, Luiz E., and Paulo G. Coelho, eds. Engineering Mineralized and Load Bearing Tissues. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-22345-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Georgia. Department of Transportation. Evaluation of bridge load-bearing capacity estimation technology. Dept. of Transportation, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

The selection of load-bearing structures for buildings. Elsevier, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

H, Cardon A., and Verchery G, eds. Mechanical characterisation of load bearing fibre composite laminates. Elsevier Applied Science Publishers, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hendry, A. W. The calculation of eccentricities in load bearing walls. Brick Development Association, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
11

Horváth, Z. Kálmán. The selection of load-bearing structures for buildings. Elsevier, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
12

Fleming, David P. Transient vibration prediction for rotors on ball bearings using load-dependent non-linear bearing stiffness. National Aeronautics and Space Administration, Glenn Research Center, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
13

Jett, Timothy Raymond. Evaluation of bearing configurations using the single bearing tester in liquid nitrogen. National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
14

Jett, Timothy Raymond. Evaluation of bearing configurations using the single bearing tester in liquid nitrogen. National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
15

Eschenauer, Hans. Applied structural mechanics: Fundamentals of elasticity, load-bearing structures, structural optimization : including exercises. Springer, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
16

Ramberger, Günter. Structural bearings and expansion joints for bridges. International Association for Bridge and Structural Engineering (IABSE), 2002. http://dx.doi.org/10.2749/sed006.

Full text
Abstract:
<p>Bridge superstructures have to be designed to permit thermal and live load strains to occur without unintended restraints. Bridge bearings have to transfer forces from the superstructure to the substructure, allowing all movements in directions defined by the designer. The two functions -transfer the loads and allow movements only in the required directions for a long service time with little maintenance - are not so easy to fulfil. Differ­ent bearings for different purposes and requirements have been developed so, that the bridge designer can choose the most suitable bearing.</p&g
APA, Harvard, Vancouver, ISO, and other styles
17

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Experimental verification. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
18

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Theoretical development. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
19

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Theoretical development. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
20

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Experimental verification. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
21

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Experimental verification. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
22

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Experimental verification. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
23

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Experimental verification. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
24

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Theoretical development. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
25

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Theoretical development. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
26

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Experimental verification. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
27

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Theoretical development. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
28

Aune, Petter. Lateral load-bearing capacity of nailed joints based on the yield theory: Theoretical development. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
29

Bekbasarov, Isabay. Study of the process of driving piles and dies on models. INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1074097.

Full text
Abstract:
The monograph presents the results of experimental and theoretical studies conducted using models of driven piles and tape dies. The influence of the cross-section size, length, shape of the trunk and the lower end of the piles on their submergability, energy intensity of driving and load-bearing capacity was evaluated. The design and technological features of new types of piles are considered. A method for determining the load-bearing capacity of a pile model based on the results of dynamic tests has been developed. Similarity conditions and formulas are presented that provide modeling of the
APA, Harvard, Vancouver, ISO, and other styles
30

National Conference on the Use of Composite Materials in Load-bearing Marine Structures (1991 Arlington, Va.). National conference on the use of composite materials in load-bearing marine structures: 25-26 September 1990. National Academy Press, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
31

Moskalenko, Vladislav, Ivan Druz', Lev Leont'ev, and Valenin Tarasov. Features of the influence of the connection points of the set on the bearing capacity of the side floors of ice navigation vessels. INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1870592.

Full text
Abstract:
The monograph is devoted to the consideration of the problems of damage to the side floors of ice navigation vessels from the action of concentrated ice load. The problems of the ultimate equilibrium of the beams of the on-board set are solved, taking into account the features of the ladder fastening. Extensive model experiments on the supercritical deformation of beams are presented. The methods of designing and defecation of the on-board set of ice navigation vessels, taking into account the cable connections, are proposed.
 It can be useful to scientists, specialists of ship repair pla
APA, Harvard, Vancouver, ISO, and other styles
32

Leonovich, Sergey, Nikolay Chernoivan, Viktor Tur, and Dmitriy Litvinovskiy. Technology of reconstruction of buildings and structures. INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1867636.

Full text
Abstract:
The monograph provides the basics of technology for the production of general construction and finishing works performed during the reconstruction of existing industrial and civil facilities: strengthening and restoration of exploited structures, as well as the construction of new buildings and structures designed at the reconstructed facility.
 The issues of conducting field surveys of operated buildings and structures in order to prepare a conclusion on the technical condition of load-bearing and enclosing structures are considered.
 The main design solutions and technology of work
APA, Harvard, Vancouver, ISO, and other styles
33

Szabó, Bálint. Dicționar ilustrat de intervenții la structuri portante istorice: Illustrated dictionary of intervention on historic load-bearing structures = Történeti tartószerkezeti beavatkozások illusztrált szakszótára = Bildworterbuch der Eingriffe in historische Tragwerke. Utilitas, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
34

Zaretsky, Erwin V. Comparison of life theories for rolling-element bearings. National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
35

Zaretsky, Erwin V. Comparison of life theories for rolling-element bearings. National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
36

W, Roeder C., Campbell T. Ivan, National Cooperative Highway Research Program., American Association of State Highway and Transportation Officials., United States. Federal Highway Administration., and National Research Council (U.S.). Transportation Research Board., eds. High-load multi-rotational bridge bearings. National Academy Press, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
37

SetkovSerbin, Evgeniy. Building structures. Calculation and design. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1030129.

Full text
Abstract:
The textbook outlines the basics of designing and calculating the simplest and most widely used load-bearing structures in construction practice. Meets the requirements of the federal state educational standards of secondary vocational education of the latest generation. It is intended for students and teachers of construction colleges and technical schools, as well as other secondary vocational educational institutions that train specialists in construction specialties, primarily in the specialty 08.02.01 "Construction and operation of buildings and structures" with all its specializations of
APA, Harvard, Vancouver, ISO, and other styles
38

Kania, Ludwik. Analiza obciążenia wewnętrznego w łożyskach tocznych wieńcowych w aspekcie ich nośności statycznej. Wydawnictwa Politechniki Częstochowskiej, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
39

Alekseenko, Vasiliy, and Oksana Zhilenko. Design, construction and operation of buildings in seismic areas. INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1000210.

Full text
Abstract:
The main purpose of the textbook is to acquaint students and engineers with the principles of design and construction of buildings and structures in seismic areas.
 The tutorial sets out the basic principles of design and construction of frame, large-panel buildings, buildings with load-bearing walls made of small-piece stones and large blocks, buildings made of local materials, frameless buildings made of monolithic reinforced concrete. The design requirements for buildings in earthquake-prone areas are described, and the main requirements for the production of works and implementation o
APA, Harvard, Vancouver, ISO, and other styles
40

Load Bearing Fibre Composites. Kluwer Academic Publishers, 2002. http://dx.doi.org/10.1007/b118150.

Full text
APA, Harvard, Vancouver, ISO, and other styles
41

Hampton, Niesha. Bearing Ezra's Load: A Novella. Independently Published, 2017.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
42

Hampton, Niesha. Bearing Ezra's Load: A Novella. Independently Published, 2017.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
43

Bertassoni, Luiz E., and Paulo G. Coelho. Engineering Mineralized and Load Bearing Tissues. Springer London, Limited, 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
44

Coelho, Paulo, and Luiz E. Bertassoni. Engineering Mineralized and Load Bearing Tissues. Springer International Publishing AG, 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
45

Bertassoni, Luiz E., and Paulo G. Coelho. Engineering Mineralized and Load Bearing Tissues. Springer, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
46

Removing Internal Load-bearing Walls in Older Dwellings. Construction Research Communications, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
47

The 2006-2011 World Outlook for Non-Load and Load-Bearing Metal Studs. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
48

National Aeronautics and Space Administration (NASA) Staff. Transient Vibration Prediction for Rotors on Ball Bearings Using Load-Dependent Non-Linear Bearing Stiffness. Independently Published, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
49

Wurm, Jan. Building with Glass: Design and Construction of Load-Bearing Structures. de Gruyter GmbH, Walter, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
50

Wurm, Jan. Building with Glass: Design and Construction of Load-Bearing Structures. de Gruyter GmbH, Walter, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the bibliographies on the topic 'Bearing load' for other source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography