Relevant bibliographies by topics / Bending machine

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Bending machine'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Bending machine.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Bending machine"

1

Mr., Vikas Suresh More, Jeevankumar Anil Sodal Prof., and Prasad Ramchandra Wagh Prof. "Automatic Hydraulic Bending Machine." International Journal of Scientific Development and Research 9, no. 5 (2024): 1540–43. https://doi.org/10.5281/zenodo.11418971.

Full text
Abstract:
The construction industry is increasingly focusing on automation to enhance productivity and reduce labor costs. However, bending rods and pipes for beams and columns still relies heavily on manual labor due to the high cost and complexity of existing machines. This paper presents a cost-effective solution: the Hydraulic Rod Bending Machine. Utilizing hydraulic pressure, this machine efficiently bends aluminum, mild steel, and copper rods without the need for repositioning, significantly improving operational efficiency. The machine comprises a hydraulic cylinder, screw drive loading mechanism
APA, Harvard, Vancouver, ISO, and other styles
2

Chaudhari, Manjit. "Hydraulic Pipe Bending Machine." International Journal for Research in Applied Science and Engineering Technology 9, no. VII (2021): 3299–304. http://dx.doi.org/10.22214/ijraset.2021.37102.

Full text
Abstract:
The process of pipe bending finds its importance in many industries, instruments, fluids transportation etc. The aim of this research is to design and fabricate a hydraulic jack-based pipe bending machine which has ability to bend pipes used at gas supply industry, while keeping in mind the requirements of a good pipe bending machine to provide high quality bends without defects but at the cost lesser than the existing pipe bending machines available in the marketplace. The fabricated pipe bending machine works on the principle of press bending method to perform the bending operation. The desi
APA, Harvard, Vancouver, ISO, and other styles
3

Mikaeva, S. A. "SEMI-AUTOMATIC QUARTZ TUBE BENDING MACHINE." Spravochnik. Inzhenernyi zhurnal, no. 302 (May 2022): 36–43. http://dx.doi.org/10.14489/hb.2022.05.pp.036-043.

Full text
Abstract:
The article presents the assembly of a semi-automatic quartz bulb bending machine for the production of bactericidal ultraviolet lamps. The standard methods of production and testing of quartz flask bending machines were analyzed in the work. In the course of work and on the basis of the conducted research, the technical characteristics and equipment configuration were worked out. The bending machine includes a block for bending quartz tubes with a diameter of 19 mm and a block for bending quartz tubes with a diameter of 28 mm. Quartz tubes are installed on the ma-chine and removed manually. T
APA, Harvard, Vancouver, ISO, and other styles
4

Kamble, Sachin. "Design of Multi Bend Radius Bending Die for CNC Tube Bending Machine." International Journal of Science and Research (IJSR) 12, no. 5 (2023): 562–65. http://dx.doi.org/10.21275/sr23506125127.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Taware, Shridhar C., Abhishek T. Barge, Ganesh R. Jadhav, Mithun K. Gore, and Peshatwar.S.V Prof. "STUDY ON IMPROVING PERFORMANCE OF SOLAR COOKER BY USING DIFFERENT COATING MATERIAL." JournalNX - a Multidisciplinary Peer Reviewed Journal TDCME-2k18 (May 10, 2018): 144–46. https://doi.org/10.5281/zenodo.1419940.

Full text
Abstract:
Now a days the world is focusing into automation. Each and every work of human is reduced by a machine, but few areas like construction the usage of machines for bending rods for stirrups which are used to withstand loads in beams and columns are not done by machine because the cost of machine is high and need skilled labors to operate it. In this paper is aimed to do bending operation for stirrups using pneumatic and named as pneumatic rod bending machine https://journalnx.com/journal-article/20150744
APA, Harvard, Vancouver, ISO, and other styles
6

Aher, Dr N. S. "Pneumatic Sheet Bending Machine." International Journal of Scientific Research and Engineering Trends 11, no. 2 (2025): 1457–59. https://doi.org/10.61137/ijsret.vol.11.issue2.257.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

N. N. JADEJA, N. N. JADEJA, M. C. Baraiya M.C.Baraiya, A. B. Jasoliya A.B.Jasoliya, R. U. Jagad R.U.Jagad, and V. R. Makwana V.R.Makwana. "Research Paper of Manually Operated Pipe Bending Machine." Paripex - Indian Journal Of Research 3, no. 5 (2012): 66–67. http://dx.doi.org/10.15373/22501991/may2014/23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Giripunje, Manish. "Design of Manual Pipe Bending Mechanism." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (2021): 1981–88. http://dx.doi.org/10.22214/ijraset.2021.35380.

Full text
Abstract:
Rotary draw bending an ongoing process. It’s an at-hand service proffered within the current market. However, each draw bender features a divergent mechanism with its pros and cons, thanks to its main advantages; the rotary draw bender was selected. Pipe bending machines have progressed many enhancements and augmentations over the amount. The sort of pipe bending plays a critical role in industries, instruments, and transporting of fluids. The first concern is that the required bend angle that this pipe will bend on. The following report will include an outline of the accessibility of this mac
APA, Harvard, Vancouver, ISO, and other styles
9

Henderson, Theodorus, M. Agung Saryatmo, and Frans Jusuf Daywin. "ANALISIS PRODUKTIVITAS MESIN TEKUK DALAM PEMBUATAN KOMPONEN FRAME CHASSIS BAK KONTAINER TRUK DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS DAN FMEA." Jurnal Mitra Teknik Industri 3, no. 2 (2024): 125–34. https://doi.org/10.24912/jmti.v3i2.31992.

Full text
Abstract:
A bending machine is a machine needed to produce a container for a transport truck. In producing container tubs, PT. XYZ manufactures the necessary components in the overall formation of the body including the body frame chassis components made of steel plates. In producing truck chassis frames, it can be seen that production targets from making truck chassis frame components are not achieved in production with bending machines. This is because there is damage to components such as hydraulics, PLC, encoder and so on on the main machine, namely the bending machine. The purpose of this study is
APA, Harvard, Vancouver, ISO, and other styles
10

Rangga, Danar jaya, Karmin, and Mardiana. "OPTIMALISASI MESIN BENDING AKRILIK DENGAN VARIASI PENINGKATAN SUHU." MACHINERY: JURNAL TEKNOLOGI TERAPAN 6, no. 1 (2025): 28–37. https://doi.org/10.5281/zenodo.15234316.

Full text
Abstract:
<em>The acrylic bending machine used in this study is a development of a machine that has been circulating in the market and also a development of the previous acrylic bending machine which aims to optimize the acrylic bending tool in order to produce an acrylic bending machine that is more precise in temperature regulation and bending results, this test is carried out by means of experimental data collection or direct testing and data analysis methods used is a Taguchi method with an orthogonal array L16 which is assisted by Minitab software and the results are obtained that the temperature,
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Bending machine"

1

Quesada, Díaz Raquel. "Horseshoe Bending Machine : Bending Mechanism." Thesis, Högskolan i Skövde, Institutionen för teknik och samhälle, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-9432.

Full text
Abstract:
Horseshoes are manufactured metal plates developed in an extensive assortment of materials and shapes and their main function is to protect the horse’s hooves and legs against abrasion and rupture. After a certain period of time the horseshoes are lost, worn out, or the hoof needs to be treated. Horseshoeing is a repetitive time consuming process for the farrier who has to heat the horseshoe inside a forge until it reaches the required temperature and shape it with a hammer until it fits perfectly to the horses’ hoof. The main goal of this project is to develop a horseshoe bending machine able
APA, Harvard, Vancouver, ISO, and other styles
2

Marron, J., J. Marron, G. Quispe, Moises Perez, and Ibañez Carlos Arturo Raymundo. "Clamp bending machine and annealed wire cutter for reinforced concrete columns." Institute of Physics Publishing, 2020. http://hdl.handle.net/10757/651804.

Full text
Abstract:
This study developed a reinforced steel rod bending machine for rods with diameters of up to 8 mm and annealed wire cutter for up to 5 kg for replacing manual intervention required to bend rods in reinforced concrete columns. This study aims to reduce the physical effort that could lead to occupational diseases, such as tenosynovitis, bursitis, muscle disorders. Clamp manufacturing possesses great risk for workers, who are exposed to injuries while using different cutting devices, such as grinders and electric saws. They also face potential problems such as muscular fatigue due to the nonergon
APA, Harvard, Vancouver, ISO, and other styles
3

Penekli, Ufuk. "Finite Element Analysis Of Bending Operation Of Aluminum Profiles." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12609463/index.pdf.

Full text
Abstract:
Bending process is an important forming process in most industrial fields. Springback and cross-section distortion are commonly faced problems in bending process. Springback behavior of closed and open section beams changes with different parameters such as cross-section type, cross-section dimensions, bend radius and bend angle. For closed sections like tube, the dominating problem is cross-section distortion. The thickness of the tube at intrados (inner surface of tube being in contact with die) increases, whereas the thickness of the tube at extrados (outer surface of tube) decreases. Furth
APA, Harvard, Vancouver, ISO, and other styles
4

Kluka, Ladislav. "Konstrukce hydraulické ohýbačky ocelových profilů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229274.

Full text
Abstract:
This master’s thesis deals with design of a hydraulics bending machine. Bending machine will be used primarily for bending reinforcement bars in the shape of stapes. It consists of bending, sliding and chute system, which are located in the machine frame. Drive of each system is provided by a rotary and two linear hydraulic motors. Then there is described a hydraulic system and selection of its most important parts. Work is supplemented by visual documentation in the form of images of individual systems were processed in a CAD system Inventor 2010
APA, Harvard, Vancouver, ISO, and other styles
5

Williams, Isabelle. "Bending Family Friendly into Fear: Nostalgia, Minstrelsy and Horror in Bendy and the Ink Machine." Chapman University Digital Commons, 2019. https://digitalcommons.chapman.edu/film_studies_theses/5.

Full text
Abstract:
When one thinks of Disney’s Mickey Mouse, fear and horror are not terms normally associated with this iconic American cartoon character; however, the video game Bendy and the Ink Machine turns animated bodies (cartoons) into bodies the player fears. In this game family friendly cartoon characters are transformed into figures of fear. Furthermore, Bendy and the Ink Machine does this by making the bending of Black bodies visible through what I call the gameic gaze. The transformation from family friendly into fear happens through the resistive gaze, the gameic gaze, which lingers on the bending
APA, Harvard, Vancouver, ISO, and other styles
6

Овчар, О. Ю., та Я. Ю. Павліченко. "Розробка конструкції гідравлічного пресу для гнуття листової сталі (комплексний)". Thesis, Чернігів, 2021. http://ir.stu.cn.ua/123456789/22809.

Full text
Abstract:
Овчар, О. Ю. Розробка конструкції гідравлічного пресу для гнуття листової сталі (комплексний) : дипломна робота : 131 «Прикладна механіка» / О. Ю. Овчар, Я. Ю. Павліченко ; керівник роботи С. В. Олексієнко ; НУ "Чернігівська політехніка", кафедра технологій зварювання та будівництва. – Чернігів, 2021. – 72 с.<br>Об'єкт дослідження: гідравлічний листогин. Предмет дослідження: технологічна, транспортабельна та надійна зварна конструкція, як дає можливість згинати листову сталь та виготовляти профіль власного виробництва для застосування у металевих конструкціях. Мета курсового проекту: проєкт
APA, Harvard, Vancouver, ISO, and other styles
7

Al-Maeeni, Sara Salman Hassan [Verfasser]. "Re-engineering of Machine Tools in the Context of Sustainability and Industry 4.0 : Case Study: Rotary Draw Bending Machines / Sara Salman Hassan Al-Maeeni." Düren : Shaker, 2021. http://d-nb.info/1227824246/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Baker, Donald Alexander. "A Finite Element Study of Stresses in Stepped Splined Shafts, and Partially Splined Shafts Under Bending, Torsion, and Combined Loadings." Thesis, Virginia Tech, 1999. http://hdl.handle.net/10919/35637.

Full text
Abstract:
<p>The maximum von Mises stress is calculated for solid finite element models of splined shafts with straight-sided teeth. One spline shaft is stepped with larger diameter section containing spline teeth and the smaller diameter section circular and cylindrical with no spline teeth. A second shaft is not stepped, but contains incomplete spline teeth.</p> <p>Finite element analyses are performed for the cases of a stepped shaft of three different step size ratios (d/D). The second set of models consists of a solid cylindrical shaft with incomplete spline teeth. The incomplete regions of th
APA, Harvard, Vancouver, ISO, and other styles
9

Hasslöf, Hampus. "Utveckling av bockningsmaskin för massiv rektangulär stålstång." Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-55470.

Full text
Abstract:
Den här rapporten är en del av ett examensarbete på 22,5 högskolepoäng inom högskoleingenjörsprogrammet i innovationsteknik och design och utförs vid Karlstads universitet under vårterminen 2017. Examensarbetet utförs på uppdrag av Rejlers AB som är ett svenskt teknikkonsultbolag. Rejlers har under två års tid tillverkat och testat en prototyp för bockning av ståldetaljer. Prototypen i sin nuvarande form anpassar automatiskt ståldetaljen efter slutanvändarens behov, genom inkrementell formning. När ståldetaljer med stort tvärsnitt bockas uppstår problem i form av plastisk deformation av kompon
APA, Harvard, Vancouver, ISO, and other styles
10

Craig, Bruce A. "Comparison of creep/duration of load performance in bending of Parallam® parallel strand lumber to machine stress rated lumber." Thesis, University of British Columbia, 1986. http://hdl.handle.net/2429/26194.

Full text
Abstract:
A comparison of the creep/duration of load (DOL) performance of a new structural wood composite material called Parallam® parallel strand lumber (PSL) to two grades of machine-stress-rated (HSR) Douglas-fir lumber is presented in this thesis. Evaluation of the creep/DOL performance was made on nominal 2x4 members under constant bending stress at three stress levels. A total of 306 test specimens were evaluated for a 15-1/2 month time period. The analysis suggests that the duration of load effect for Parallam PSL was consistent with the Madison curve for the time period studied while the MSR D
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Bending machine"

1

Hankel, Steve. Design of a hydraulic bending machine. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Berezovskiĭ, S. F. Ėkspluatat͡s︡ii͡a︡ i remont oborudovanii͡a︡ profilegibochnykh stanov. Metallurgii͡a︡, Cheli͡a︡binskoe otd-nie, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Great Britain. Health and Safety Executive., ed. Safeguarding 3 roll bending machines. HSE Books, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Benson, Steve D. Press brake technology: A guide to precision sheet metal bending. Society of Manufacturing Engineers, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gingery, Vincent R. How to Build a Pipe Bending Machine. David J. Gingery Publishing LLC, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Walsby, Michael. How to Make a Pipe-Bending Machine: Workshop Equipment manual Number 5 (Workshop Equipment, 5). Practical Action, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

How to Make a Metal-Bending Machine: Workshop Equipment Manual Number 10 (Workshop Equipment, 10). Practical Action, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

The 2006-2011 World Outlook for Manufacturing Punching, Sheering, Bending, Forming, Pressing, Forging and Die-Casting Machines and Other Metal Forming Machine Tools Excluding Hand Tools. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Parker, Philip M. The 2007-2012 World Outlook for Manufacturing Punching, Sheering, Bending, Forming, Pressing, Forging and Die-Casting Machines and Other Metal Forming Machine Tools Excluding Hand Tools. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Urbanczyk, Ronald K. Centralized plate bending: The complete registration system for business forms manufacturing. 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Bending machine"

1

Dennis, R. A. "2. Rim - bending machine." In Making Wheels. Practical Action Publishing, 1994. http://dx.doi.org/10.3362/9781780442747.002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Celledoni, Elena, Halvor S. Gustad, Nikita Kopylov, and Henrik S. Sundklakk. "Predicting Bending Moments with Machine Learning." In Lecture Notes in Computer Science. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-26980-7_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wehr, Martin, Andreas Pott, and Karl-Heinz Wehking. "Bending Fatigue Strength and Lifetime of Fiber Ropes." In Mechanisms and Machine Science. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-61431-1_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mann, Bob. "Prelims - How to Make a Metal-Bending Machine." In How to Make a Metal-Bending Machine. Practical Action Publishing, 1987. http://dx.doi.org/10.3362/9781780442389.000.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mann, Bob. "1. How to Make a Metal-Bending Machine." In How to Make a Metal-Bending Machine. Practical Action Publishing, 1987. http://dx.doi.org/10.3362/9781780442389.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cieślar, K., and Jacek Rysiński. "Modelling of Bending Pre-compressed Beams Made of Resin L285." In Mechanisms and Machine Science. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-13321-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ma, Guanghao, and Luxian Li. "Study on Bending Warping Functions in the Planar Beam Theory." In Mechanisms and Machine Science. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-82907-9_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Nguyen, Nam V., Thoai N. Tran, and Hai V. Le. "A Static Bending Performance of Organic Solar Panels Under Wind Pressure." In Mechanisms and Machine Science. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-83357-1_38.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hu, Shiyuan, Junqing Yin, Yongdang Chen, Yingying Feng, and Zihan Chen. "Research on Bending Load Localization Method for Composite Laminates Based on Flexible Sensors." In Mechanisms and Machine Science. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-68775-4_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Takhov, Dmitriy A., Mariya R. Bortkovskaya, Tatyana T. Kaverzneva, et al. "Semiempirical Model of the Real Membrane Bending." In Advances in Neural Computation, Machine Learning, and Cognitive Research II. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-01328-8_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Bending machine"

1

Zhong, Yuchen, Qijun Ying, and Xiaohui Cai. "Detecting Feet's Bending Patterns With Smart Insoles." In 2024 IEEE 5th International Conference on Pattern Recognition and Machine Learning (PRML). IEEE, 2024. https://doi.org/10.1109/prml62565.2024.10779792.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ren, Lirong, Yifan Zhou, Like Li, and Ya-nan Zhang. "Machine Learning Assisted Optical Fiber Vector Bending Sensor Based on MZI." In 2024 IEEE 16th International Conference on Advanced Infocomm Technology (ICAIT). IEEE, 2024. https://doi.org/10.1109/icait62580.2024.10807938.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Y. S., Z. M. Yue, F. R. Liu, J. S. Qi, and J. Gao. "The Design and Analysis of Free Bending Tube Bending Machine." In The International Workshop on Materials, Chemistry and Engineering. SCITEPRESS - Science and Technology Publications, 2018. http://dx.doi.org/10.5220/0007435301150121.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nepershin, Rostislav I. "Tube bending on the roll machine." In 11TH INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2013: ICNAAM 2013. AIP, 2013. http://dx.doi.org/10.1063/1.4825918.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Oliveira das Mercês, Viviane, Luana da França Vieira, Anderson Dourado Sisnando, and Vitaly F. Rodriguez-Esquerre. "Machine learning analysis of waveguides bending." In Integrated Optics: Design, Devices, Systems, and Applications VII, edited by Pavel Cheben, Jiří Čtyroký, and Iñigo Molina-Fernández. SPIE, 2023. http://dx.doi.org/10.1117/12.2665762.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Castellini, L., M. Carmignano, M. D'Andrea, and M. Villani. "Brushless PM actuator for metal bending machine." In IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2013. http://dx.doi.org/10.1109/iecon.2013.6699548.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Meggiolaro, Marco Antonio, Jaime T. P. Castro, and Rodrigo de Moura Nogueira. "A FAST ROTATING BENDING FATIGUE TEST MACHINE." In 24th ABCM International Congress of Mechanical Engineering. ABCM, 2017. http://dx.doi.org/10.26678/abcm.cobem2017.cob17-1824.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wu, Wenqiang, Jialiang Xie, Guanghuan Chen, Hebang Lin, Lingqian Kong, and Chunliang Zhang. "Visualization automatic programming system of bending machine based on machine vision." In 2016 IEEE International Conference on Information and Automation (ICIA). IEEE, 2016. http://dx.doi.org/10.1109/icinfa.2016.7831897.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wright, Daniel Nilsen, Astrid-Sofie B. Vardoy, Branson D. Belle, et al. "Bending machine for testing reliability of flexible electronics." In 2017 IMAPS Nordic Conference on Microelectronics Packaging (NordPac). IEEE, 2017. http://dx.doi.org/10.1109/nordpac.2017.7993162.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

shah, Arjun kumar, Nilesh kumar, M. Vignesh, and Pradeep khanna. "Design and Fabrication of Automatic Rebar Bending Machine." In 2018 International Conference on Computing, Power and Communication Technologies (GUCON). IEEE, 2018. http://dx.doi.org/10.1109/gucon.2018.8675068.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Bending machine"

1

Hankel, Steven G., and Marshall Begel. Design of a hydraulic bending machine. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 2004. http://dx.doi.org/10.2737/fpl-gtr-148.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Olsen. L51740 Evaluation of the Structural Integrity of Cold Field-Bent Pipe. Pipeline Research Council International, Inc. (PRCI), 1996. http://dx.doi.org/10.55274/r0010361.

Full text
Abstract:
During recent pipeline construction seasons, there have been reported difficulties in cold field bending different joints of line pipe produced by the same manufacturer during a particular production run. These difficulties were typically manifested as an inability to achieve bends of one to one-and-a-half degrees per diameter in the pipe without forming ripples. Some of these problems could be traced to poor bending practices, i.e., inappropriate bending machine set-up and operator inexperience. However, it was observed that even with proper machine set-up and experienced operators, some "bad
APA, Harvard, Vancouver, ISO, and other styles
3

Kramer, Wilkowski, and Maxey. L51514 Flow Tolerance of Spiral-Welded Line Pipe. Pipeline Research Council International, Inc. (PRCI), 1987. http://dx.doi.org/10.55274/r0011237.

Full text
Abstract:
The goals of this research program were to: (1) assess the mechanical and fracture properties of spiral-welded pipe, (2) characterize the crack initiation and maximum load carrying capacity, and (3) determine stress magnification factors for helical flaws. Flattened-strap tensile tests, Charpy V-notch (CVN) tests, and JIC fracture toughness tests were performed to meet the first objective. Results showed that tensile properties are independent of specimen orientation, while CVN data varied by as much as 3 to 1 for parallel vs. transverse machined specimens. Full-scale pipe fracture experiments
APA, Harvard, Vancouver, ISO, and other styles
4

Chauhan, Vinod. L52307 Remaining Strength of Corroded Pipe Under Secondary Biaxial Loading. Pipeline Research Council International, Inc. (PRCI), 2009. http://dx.doi.org/10.55274/r0010175.

Full text
Abstract:
Corrosion metal-loss is one of the major damage mechanisms to transmission pipelines worldwide. Several methods have been developed for assessment of corrosion defects, such as ASME B31G, RSTRENG and LPC. These methods were derived based on experimental tests and theoretical/numerical studies of the failure behavior of corroded pipelines subjected only to internal pressure loading. In the vast majority of cases, internal pressure loading will be the main loading mechanism on the pipeline. However, there may be instances when pipelines could also be subjected to significant loading from the env
APA, Harvard, Vancouver, ISO, and other styles
5

Leis. L51845 Database of Mechanical and Toughness Properties of Pipe. Pipeline Research Council International, Inc. (PRCI), 2000. http://dx.doi.org/10.55274/r0010150.

Full text
Abstract:
�The lower-strength grades of steel used for transmission pipelines into the 60s were much like those used in other steel construction in that era. These steels gained strength by traditional hardening mechanisms through chemistry changes, largely involving carbon and manganese additions. Improvement of these grades, primarily through control of ingot chemistry and steel processing, became necessary when running brittle fracture was identified as a failure mechanism in gas-transmission pipelines in the late 50s. Eventually, this avenue to increasing strength was exhausted for pipeline applicat
APA, Harvard, Vancouver, ISO, and other styles
6

Graville. L51764 Hydrogen Cracking in the Heat-Affected Zone of High-Strength Steels-Year 2. Pipeline Research Council International, Inc. (PRCI), 1997. http://dx.doi.org/10.55274/r0010170.

Full text
Abstract:
During year 1 of this project a test to evaluate the sensitivity of the heat affected zone (HAZ) to hydrogen cracking was developed. This was in response to a need for a test which provided unambiguous results in contrast to existing test methods which often led to difficulties in interpretation. For example, WIC tests usually cracked in the weld metal rather than the HAZ and therefore did not produce a clear indication of the sensistivity of the HAZ. The new test involves a machined notch which can be placed in the HAZ thus forcing crack initiation to occur in the desired region. A further ad
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Bending machine' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography