Dissertations / Theses on the topic 'Best management practices (Pollution prevention) – Swaziland'

Thesis (M.S.)--West Virginia University, 2005.<br>Title from document title page. Document formatted into pages; contains ix, 109 p. : ill. (some col.), maps (part col.). Includes abstract. Includes bibliographical references (p. 103-105).

Thesis (M.S.) University of Missouri-Columbia, 2006.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on August 21, 2007) Includes bibliographical references.

Best management practices are methods that have been determined to be the most effective and practical means of preventing or reducing pollution. Best Management Practices (BMPs) relating to surface water pollution abatement for North Dakota beef cow operations are of particular importance due to the importance of the agriculture industry in North Dakota. North Dakota has yet to address the use of voluntary BMPs to address potential surface water pollution regulations. Probit models were used to estimate the likelihood of North Dakota beef cow operators adopting specific production practices to reduce potential surface water pollution through the use of BMPs. The six BMPs discussed in this research include nutrient management, rotational grazing, filterstrjps, riparian buffers, streambank fencing, and streambank bridging/crossing. Number of beef cows on operation, education, awareness of cost share programs, contact with extension service, ownership structure, debt level, record keeping method, and pasture season usage were found to be significant in the likelihood of adopting a BMP.

Thesis (M.S.) University of Missouri-Columbia, 2004.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file viewed on (June 29, 2006) Vita. Includes bibliographical references.

Thesis (M.S.) University of Missouri-Columbia, 2006.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on August 27, 2007) Includes bibliographical references.

European Union published IPPC Directive in 1996 aiming to create an integrated approach in order to manage and control industrial facilities better. IPPC provides the development of a new concept of &ldquo<br>Best Available Techniques (BAT)&rdquo<br>, the most effective, advanced and applicable methods, preventing emissions to the environment and providing efficient use of resources. Within this framework, numerous sectoral Best Available Techniques Reference Documents were published giving information on the sector and BAT alternatives for this sector. Iron and steel industry, which causes quite significant amount of resource depletion and waste production, is one of the industries within the scope of IPPC Directive. In the this study, environmental performance of an integrated iron and steel plant in Turkey is evaluated and compared with the EU&rsquo<br>s integrated iron and steel plants, in order to suggest applicable BAT alternatives for the studied plant. Totally 74 BAT alternatives were evaluated and among them 36 alternatives were determined to be applicable for this plant. Finally, two of these applicable BAT alternatives were selected and compared by use of cross-media effects and financial analysis. The results of this study indicated that dust emission and high energy consumption are the common problems in the facility. Moreover, sintering process was found to be the least compatible sub-process with EU&rsquo<br>s iron and steel plants. Additionally, it was determined that with respect to application of BAT alternatives, facility is quite compatible with EU&rsquo<br>s iron v and steel plants. Furthermore, cross media effect and financial analysis revealed that the selected BAT alternatives, &ldquo<br>Advanced Electrostatic Precipitator (ESP)&rdquo<br>and &ldquo<br>Bag Filter-combined or integrated reduction of solid and gaseous pollutants&rdquo<br>, have different cross media effects on the environment, however, the second alternative is a more cost-effective alternative than the first one. Since this study was undertaken in an integrated iron and steel plant that represents Turkish iron and steel industry with respect to its production process, production capacity and environmental performance<br>the results of this study can be used to aid decision makers to make environmental initiatives in iron and steel industry in Turkey.

"Professional paper presented in partial fulfillment of the requirements for the degree of Master of Science, Environmental Studies, the University of Montana, Missoula, MT, spring 2007."<br>Title from PDF title page (viewed on Aug. 12, 2007). Includes bibliographic references (p. 67-69).

This thesis argues that the management of environmental impacts has many analogies with the management of risk and practice can be improved by using ideas, concepts and principles found in the management of risk in other spheres of human activity. An overview of the challenges faced by environmental impact practitioners in New Zealand and reinforcement of its importance to the sustainable management of natural and physical resources under New Zealand's Resource Management Act is provided. Key risk management ideas, concepts and principles drawn from a variety of sources are listed and parallels drawn between these and existing environmental impact assessment practice in New Zealand. From this list a number are selected and opportunities for improving environmental impact assessment practice are explored. A number of opportunities are identified, starting with the need for a common language and methodology amongst practitioners. Categorisation of impacts to assist transparency of analysis and expression using frequency-consequence curves to aid and promote consistency of decision-making are further areas of opportunity. Risk management has several well-developed techniques for dealing with uncertainty and selection of assessment endpoints. The connection between communication of risk and public perception is an area with significant potential for communication about environmental impacts. Challenges with effective public participation in environmental decision-making are backgrounded and risk management practised in two high profile areas examined for opportunity for improved practice. Neither appears to offer opportunity for improvement in key decision-making areas. A relatively new indicator approach towards risk assessment called "healthy systems method" appears to have significant potential for cost-effective analysis of systems of various types and at various levels. This thesis identifies a number of other areas of risk management requiring further research to determine potential for achieving better practice in environmental impact assessment.

Thesis (M.Ing.)--Stellenbosch University, 2000.<br>ENGLISH ABSTRACT: The objective of this research has been to compare nonpoint sources assessment techniques for simulating phosphorous production in rural catchments which have a variety ofland use types. Four nonpoint source assessment techniques capable of simulating phosphorous production, operating at different spatial and temporal resolutions, were selected after an intensive literature review. The model selection criteria included the capability to simulate phosphorous production, the need for the study to cover a range of spatial and temporal resolutions, model data requirements, model affordability and availability in South Africa. The models selected using these criteria are the Phosphorous Export Model (PEM) (Weddepohl & Meyer, 1992), Impoundment and River Management and Planning Assessment Tool for Water Quality Simulation Model (IMPAQ) (DWAF,1995), the Hydrological Simulation Program Fortran (HSPF) (Bricknell,1993) and the Agricultural Catchments Research Unit Model (ACRU) (Smithers and Caldecott, 1994). Four ofthe study catchments were selected within the Berg River basin in the Western Cape and the remaining four were selected within the Amatole catchments in the Eastern Cape. The four subcatchments in the Berg River basin are the Twenty-Four Rivers, Leeu River, Kompanjies River and Doring River catchments and the four in the Amatole catchments are the Upper Buffalo, Cwencwe, Yellowwoods and Gqunube River catchments. The range of land use/cover types comprises: Western Cape catchments : wheat, grapes, natural vegetation and forestry Eastern Cape catchments : natural vegetation and forestry The PEM and IMPAQ models were applied reasonably successfully to all the catchments to simulate phosphorous production, with the observed flow as the input. The HSPF model could not successfully be applied to the catchments to simulate both the catchment hydrology and phosphorous production. Hence, the investigation into HSPF was abandoned, and in its place, the ACRU daily phosphorous yield model was incorporated at a fairly late stage in the research. ACRU was applied to only the Western Cape catchments. The estimated parameters for different land use types were compared to investigate the potential for parameter transfer in space and time. Both the PEM and IMP AQ models showed promise that land use parameters could be transferred in time for catchments located in the Western Cape catchments, but did not show promise for catchments located in the Eastern Cape. The IMPAQ model showed promise that land use parameters could be transferred in space for catchments located in the Eastern Cape, but did not perform as well in the Western Cape catchments. The PEM model showed promise that land use parameters could be transferred in space for catchments located in the Western Cape, but did not perform as well in the Eastern Cape. Since the ACRU phosphorous yield model was included at a late stage of the research, the potential for land use parameter transfer in space and time could not investigated. The model results were verified at the relevant flow and water quality gauging stations. The ACRU phosphorous model verification results showed promise for catchments located in humid parts of the Berg River basin, but did not perform as well in the catchment located in the semi-arid part. RECOMMENDATIONS FOR FURTHER RESEARCH: I. Intensive research should be undertaken to develop a database ofland use parameters/ export coefficients related to phosphorous production (and other non-conservative constituents) in South African catchments. Availability of these parameters would make phosphorous modelling much easier. HSPF should be configured and calibrated, more especially its water quality component, for catchments with hourly rainfall and rainfall stations located within/on the catchment boundaries, to investigate its performance under South African conditions. Given the complexity of the HSPF algorithms and the time required to familiarise oneself with the model, it is recommended that such an investigation be undertaken which is not inclusive of any other models. The spatial resolution ofPEM is extremely coarse, and should be improved to allow the user to partition the total flow in the catchment according to contributions from the variety ofland use types and to estimate soluble and particulate phosphorous parameters for each land use type. A study should be undertaken to investigate the potential for the ACRU phosphorous yield model parameter transfer in time and space. Sampling frequency of water quality data in South Africa should be improved, because it is difficult to assess the performance of the calibrated water quality models, more especially phosphorous export models, due to a lack of continuous data sets. Rainfall data collection in gauged catchments, more especially Western Cape catchments (e.g. Twenty-Four Rivers, Leeu, Kompanjies and the Doring River catchments), should be improved. There should be at least one rainfall gauging station located within the catchment boundaries. This would contribute towards achieving reasonable hydrological calibration or verification. Since runoff is the driving factor for water quality components, improved hydrological calibration/verification would result in reasonable water quality calibration/verification.<br>AFRIKAANSE OPSOMMING: Die doel van die navorsing was om die simulering van fosfaat produksie in landelike gebiede, wat 'n verskeidenheid grondgebruike het, met behulp van nie-punt bron evaluerings tegnieke te evulaeer. Vier nie-punt bron evaluerings tegnieke, met die vermoë om fosfaat produksie op verskillende ruimtelike en tyds resolusies te simuleer, is gekies na 'n intensiewe ondersoek van beskikbare literatuur. Die kriteria vir die keuse van die model het ingesluit die vermoë om fosfaat produksie te simuleer, die behoefte vir die studie om 'n reeks van ruimtelike en tyds resolusies te simuleer, model data vereistes, model bekostigbaarheid en beskikbaarheid in Suid Afrika. Die gekose modelle, gebaseer op bogemelde kriteria, was die PEM, IMPAQ, HSPF en ACRU modelle. Vier van die opvanggebiede gebruik in die studie, was in die Bergrivier bekken in die Wes-Kaap en vier was in die Amatole opvanggebiede in die Oos-Kaap. Die vier opvanggebiede in die Bergrivier bekken is die Vier-en- Twentigriviere, Leeurivier, Kompanjiesrivier en die Doringrivier en die vier opvanggebiede in die Amatole opvanggebiede is die Bo-Buffels, Cwencwe, Yellowwoods, en die Gunubierivier opvanggebiede. Grondgebruik beslaan die volgende: Wes-Kaap opvanggebiede : koring, druiwe, natuurlike weiding en plantasies. Oos-Kaap : natuurlike plantegroei en plantasies Die PEM en IMPAQ modelle is met redelike sukses in al die opvanggebiede gebruik vir die simulasie van fosfaat produksie, met die waargenome vloei as invoer. Die HSPF model kan nie met enige sukses gebruik word om beide die opvanggebied hidrologie en fosfaat produksie, te simuleer nie. Die HSPF model is dus uitgeskakel en in 'n redelike laat stadium van die studie met die ACRU daaglikse fosfaat leweringsmodel vervang. Die ACRU model is net op die Wes-Kaap opvanggebiede toegepas. Die beraamde parameters vir die verskillende grondgebruik tipes is vergelyk om die potensiaal vir parameter oordrag in ruimte en tyd te ondersoek. Beide die PEM en IMPAQ modelle het belowend vertoon ten opsigte van die oordrag van grondgebruik parameters in tyd vir opvanggebiede in die Wes- Kaap, maar het geensins belowend vertoon vir die Oos-Kaap opvanggebiede nie. Die IMPAQ model het belowend vertoon ten opsigte van die ruimtelike oordrag van grondgebruik parameters vir die Oos-Kaap opvanggebiede, maar het nie so goed vertoon in die Wes-Kaap opvanggebiede nie. Die PEM model het belowend vertoon ten opsigte van die ruimtelike oordrag dat grondgebruikte parameters in die Wes-Kaap opvanggebiede is, maar het nie so goed in die Oos-Kaap opvanggebiede vertoon nie. Aangesien die ACRU fosfaat leweringsmodel op 'n laat stadium van die navorsing ingesluit is, kan die potensiaal vir die oordrag van grondgebruik parameters in ruimte en tyd nie ondersoek word nie. Die model resultate is by die toepaslike vloei en waterkwaliteit meetstasies geverifiëer Die resultate van die ACRU fosfaat model verifikasie het belowend vertoon vir opvangebiede in die humiede gedeeltes van die Bergrivier bekken, maar het nie so goed vertoon in die semi-droeë deel van die opvangebied nie. AANBEVELINGS VIR VERDERE NAVORSING : Y4 Intensiewe navorsing moet onderneem word ten einde in 'n databasis van grondgebruik parameters/oordrag koëffisiente met betrekking tot fosfaat produksie (en ander niekonserwatiewe bestandelle ) in Suid Afrikaanse opvanggebiede op te bou. Beskikbaarheid van hierdie parameters sal fosfaat modellering vergemaklik. Die HSPF model moet opgestel en gekalibreer word, meer spesifiek ten opsigte van die waterkwaliteit komponent, vir opvanggebiede met uurlikse reënval en reënvalstasies binne of op die opvanggebied grense, om die model se vertoning onder Suid Afrikaanse omstandighede te ondersoek. Gegewe die kompleksiteit van die HSPF algoritmes en tyd benodig om met model vertroud te raak, word dit aanbeveel dat so 'n ondersoek onderneem word met uitsluiting van die ander modelle. Die ruimtelike resolusie van die PEM model is uitermatig grof, en behoort verbeter te word ten einde die gebruiker toe te laat om die totale vloei in die opvanggebied in ooreenstemming met die bydraes van die onderskeie grondgebruik tipes te verdeel en om oplosbare en partikulere fosfaat parameters vir elke grondgebruik tipe te beraam. 'n Studie om die potensiaal vir die ruimtelike en tydsoordrag van die ACRU fosfaat leweringsmodel parameters te ondersoek, moet onderneem word. Die frekwensie van waterkwaliteit monitering in Suid Afrika moet verbeter word, aangesien dit moelik is om, weens 'n gebrek aan deurlopend waargenome data, die vertoning van gekalibreerde waterkwaliteit modelle te ondersoek, meer spesifiek nog fosfaat uitvoer modelle. Reënval inligting versameling in gemete opvanggebied, meer spesifiek die Wes-Kaap opvanggebiede (bv.Vier-en-Twintigriviere, Leeu, Kompanjies en Doringrivier opvanggebiede), behoort verbeter te word. Daar behoort ten minste een reënval stasie binne die opvanggebied grense te wees. Dit sal bydra tot die bereiking van redelike hidrologiese kalibrasie ofverifikasie. Aangesien afloop die dryfveer van die waterkwaliteit komponente is, sal verbeterde hidrologiese kalibrasie/verifikasie lei tot redelike waterkwaliteit kalibrasie/verifikasie.

Particles mobilized by stormwater negatively affect receiving surface waters. Stormwater best management practices (BMPs) can reduce solids along with associated pollutants in runoff but engineers and environmental managers have been long vexed by the problem of choosing the optimal BMP for a given situation. A common BMP process for solids removal is sedimentation. This thesis addresses the question of whether the effectiveness (and thus choice) of a sedimentation device can be estimated (and thus optimized) from the particle size properties of runoff, which, in turn, could be associated with specific runoff zones or land uses. Presented here is a series of experiments to determine the solids-removal capabilities of a manufactured oil-water separator that also removes solids via sedimentation. A statistical model developed from the experimental data shows that, under normal operating conditions, influent particle size can be used to accurately estimate effluent total suspended solids (TSS) for BMPs of this type. Relationships between particle size and particle-bound metal concentrations for Cu, Zn and Pb were then obtained from the literature and incorporated into the model to allow estimates of metal removal efficiencies based on TSS and PSD. The model can be used with an arbitrary particle size distribution (PSD); this allows effluent quality predictions to be made considering that particle sizes entering stormwater BMPs could vary due to anthropogenic, hydraulic or hydrologic factors. To place these experimental and modeling results in the context of an urban environment, samples of deposited stormwater solids were collected from residential areas, commercial areas and an industrial zone in Portland, Oregon, and the PSD of each sample was determined using light obstruction particle sizing. PSDs ranging over sizes from 3μm to 200μm vary among these locations. Areas with high anthropogenic impact were found to have PSDs skewed toward the smallest particle sizes. The statistical model developed here was then used to show that the effluent quality of the BMP tested would differ depending on the locations where solids were collected. The evidence presented in this thesis thus indicates that device performance will correlate with geographic locations or land use zone and validates further investigation into delineating the City of Portland's characteristic runoff zones and using the runoff characteristics of each zone to map it to the most desirable treatment practices.

Thesis (M. En.)--Miami University, Institute of Environmental Sciences, 2005.<br>Title from first page of PDF document. Document formatted into pages; contains [1], v, 101 p. : ill. Includes bibliographical references (p. 63-64).

A study was conducted in two sites: one at an electricity storage facility belonging to the Swaziland Electricity Board (SEB) and the other at a facility that belongs to its treated pole supplier, the Thonkwane wood creosote treatment plant. The drainage system of these sites leads to surface waters in rivers. This is a cause of concern since creosote contains polycyclic aromatic hydrocarbons (PAHs), which are listed as priority pollutants by the US Environmental Protection Agency. They have toxic, mutagenic and carcinogenic effects and as a result they pose a threat to human life and the environment. No previous studies have been done on PAHs in Swaziland. The main objective of this study was to determine the impact of the SEB storage facility and the creosote treatment plant by investigating the extent of PAHs in surrounding environments (soil, sediments and surface waters). Preliminary studies were undertaken on the storage facility and the creosote treatment plant. No PAHs were detected from the pole storage facility; therefore the creosote wood treatment facility was selected as the ideal site at which to conduct the research. Soil samples were collected from depths 15 cm and 60 cm at points around the creosote plant, including effluent discharge points. The samples were extracted by solid-phase micro extraction (SPME) and analysed by GC/MS. The GC/MS, incorporating a solid phase micro extraction step, provided detection limits ranging from 0.12 μg/g to 20.08 μg/g. The pollution patterns in the study site were assessed using cluster analysis and principal component analysis. Most of the 16 US EPA-listed priority pollutants were detected from the creosote wood treatment facility. PAHs such as anthracene, fluorene, naphthalene and fluoranthene were dominant in all the sampling sites. The compounds occurred in very high concentrations (0.64, 0.46, 0.27 and 0.26 mg/kg respectively). These compounds are found in pure creosote as determined in the sample taken from the Thonkwane creosote tank site. The highest concentration of PAHs was observed in the soil samples taken next to the road site. The concentrations of the identified PAHs were above the acceptable minimal level allowed in soil by the US EPA and Swaziland Environment Authority (SEA). The levels of the PAHs are also above the recommended US EPA limit in soil, which is 0.1 mg/kg. The results indicated that significant soil pollution was taking place in some of the sampling sites. The top layer (0, 15 cm) contained many PAHs at high levels whilst the 60 cm layer had a lower number of PAHs which were also in low concentrations. This provided an indication that there is no downward movement of PAHs from the surface layer to underground layers. The potential exists for contamination of surface waters when there is runoff from the project area. This is a cause of concern, since both the creosote treatment plant and areas outside the facility are contaminated. Therefore, the site has to be cleaned up, preferably by using a phytoremediation technique.<br>Environmental Sciences<br>M. Sc. (Environmental Science)

Thesis (M.S.)--Portland State University, 1993.<br>Computer-produced typeface. "Technical report EWR-003-93."--Cover. Includes bibliographical references (leaves 75-76). Also available on the World Wide Web.

The U.S. government implemented many incentive programs in the 1980s to encourage farmers to reduce agricultural runoff and erosion through the use of best management practices (BMPs). Remote sensing, GIS, and modeling, have been used to determine the effectiveness of BMPs through comparisons of before and after BMP implementation. The Salamonie watershed in Northeastern Indiana was studied for BMP effectiveness. The study addresses how agricultural practices have changed over a twenty nine year period (1975-2003), and how the implementation of BMPs will decrease the amount of sediment and nutrient load to surface waters. Methods reported on include the use of the Soil and Water Assessment Tool (SWAT) watershed model and how different weather data (precipitation and temperature) greatly affects streamflow predictions, as well as the effects of BMP implementation on sediment loads to surface water. The outcomes of this study provide a viable argument of how BMPs implementation positively affects water quality in the watershed region by effectively reducing sediment loads.<br>Department of Geography