Relevant bibliographies by topics / Binder-containing

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Binder-containing'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Binder-containing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Binder-containing"

1

Mitina, Natalia A., Vasiliy A. Lotov, Margarita A. Kovaleva, and Natali O. Kopanitsa. "PEAT-CONTAINING COMPOSITION CONTAINING MAGNESIA BINDER." IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA 61, no. 8 (August 21, 2018): 81. http://dx.doi.org/10.6060/ivkkt201861008.5729.

Full text
Abstract:
Based on the new hydraulic magnesia binder, the compositions of the peat-containing composite material have been proposed and investigated. Hydraulic magnesia binder is an astringent composition of hydration-reaction hardening, which consists of an active caustic magnesia powder and a mixing fluid. As the fluid mixing an aqueous solution of magnesium bicarbonate Mg(HCO3)2 with a concentration of 13 g/l was used. Hardening forms water-insoluble products - magnesium hydroxide Mg(OH)2 and magnesium bicarbonates of general formula MgCO3·zMg(OH)2·nH2O, which makes it possible to harden and used products based on such a binder as in the air, and in water. The use of peat as a filler of the developed compositions will make it possible to obtain lightweight waterproof materials and products of heat-insulating purpose. It has been shown that the peat-and-magnesian compositions of all compositions have a hydration hardening coefficient of more than 1.0, which indicates intensification of the hydration and hardening processes in water conditions in comparison with air and large strength parameters. Using XRD the phase composition of peat products and peat- magnesium hardening compositions was established. Thermal analysis showed the presence of magnesium hydrogencarbonates in samples of compositions that are in the form of slightly crystallized neoplasms. Investigations by electron microscopy confirmed the presence of hydrocarbons such as magnesium particles dipingite Mg5(CO3)4(OH)2·5H2O and hydromagnesite Mg5(CO3)4(OH)2·4H2O in the form of thin plates with the vertical direction of crystallization. Increased water resistance of compositions based on hydraulic magnesia binder with non-water-resistant filler peat is due to mineralization of peat particles due to their impregnation with a solution of magnesium bicarbonate and the formation of water-soluble magnesium hydrogen carbonates in the loose porous structure of peat.
APA, Harvard, Vancouver, ISO, and other styles
2

ONSORİ, Amir, Burak SENGOZ, Ali TOPAL, and Aylin ZİYLAN. "Characterization of Asphalt Binder Containing Microcapsules." Deu Muhendislik Fakultesi Fen ve Muhendislik 23, no. 67 (January 15, 2021): 207–15. http://dx.doi.org/10.21205/deufmd.2021236718.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hwang, Mun, Jung, Cho, Kim, Min, Jeon, and Kim. "Nitramine-Group-Containing Energetic Prepolymer: Synthesis, and Its Properties as a Binder for Propellant." Polymers 11, no. 12 (November 29, 2019): 1966. http://dx.doi.org/10.3390/polym11121966.

Full text
Abstract:
A composite solid propellant which generates high propulsive force in a short time is typically composed of an oxidizer, a metal fuel powder and a binder. Among these, the binder is an important component. The binder maintains the mechanical properties of propellant grains and endures several thermal and mechanical stresses in the engine. Several studies have been reported for the development of energetic propellant binders for increasing the propellant′s propulsive force. While several materials have been studied for the synthesis of energetic prepolymers, a nitramine-group-containing prepolymer is a suitable candidate because these types of prepolymers are less toxic and more cost-effective when compared to the traditional glycidyl azide polymers (GAP) and triazole-based prepolymers. Considering the lack of studies for the binder using a nitramine-group-containing prepolymers, we synthesized a nitramine-group-containing monomer and polymerized a nitramine-group-containing prepolymer. The prepolymer was then used for the preparation of the binder and its thermal and mechanical properties, as well as the effect of the plasticizer, were studied. The binder that was prepared using the prepolymer containing a nitramine-group showed very high elongation, tensile strength. Nitrate-ester (NE)-type plasticizer could reduce the glassy transition temperature (Tg)of the binder successfully. Also, high-energy is released due to the decomposition of the nitramine-group at around 245 °C, thus exhibiting the efficiency of the nitramine-group-containing prepolymer as an excellent energetic binder material.
APA, Harvard, Vancouver, ISO, and other styles
4

Aguirre, Max A., Marwa M. Hassan, Sharareh Shirzad, Louay N. Mohammad, Samuel B. Cooper, and Ioan I. Negulescu. "Performance Characteristics of Asphalt Binders containing Sodium-Alginate Hollow Fibers and Recycled Materials." MATEC Web of Conferences 271 (2019): 03004. http://dx.doi.org/10.1051/matecconf/201927103004.

Full text
Abstract:
Self-healing products such as hollow-fibers filled with an asphalt rejuvenator present an emerging technology that would enhance an asphalt mixture’s resistance to cracking damage. The objective of this study was to evaluate the rejuvenating efficiency of sodium-alginate fibers containing a rejuvenator product using asphalt binder blends containing extracted binder from recycled materials. The effects of adding extracted binder from recycled materials and sodium-alginate fibers on asphalt binder blends were evaluated by conducting a series of chemical and binder tests. HP-GPC and FTIR test results showed that the addition of fibers in blends containing recycled materials resulted in an increase in the HMW/LMW ratios. Some of the added polymeric fibers are thought to have increased the HMW fraction, thus leading to increase in the HMW/LMW ratio. The increase of the HMW fraction suggests that some of the fibers, which are polymers, caused the increase in the HMW/LMW ratios. MSCR test results showed that a binder blend with extracted binder from recycled materials and sodium-alginate fibers would have less rutting susceptibility than a conventional virgin binder would.
APA, Harvard, Vancouver, ISO, and other styles
5

Nurul Hidayah, M. K., Mohd Rosli Hainin, Norhidayah Abdul Hassan, and Mohd Ezree Abdullah. "Rutting Evaluation of Aged Binder Containing Waste Engine Oil." Advanced Materials Research 911 (March 2014): 405–9. http://dx.doi.org/10.4028/www.scientific.net/amr.911.405.

Full text
Abstract:
The stiffness of aged binder is highly contributed to the workability problem. Rejuvenating agent such as waste engine oil (WEO) is one of the sustainable modifiers that can be used to improve and attain the desired performance of the aged binder. However, concern arises on the consistency of the engine oil properties due to its unknown history usage. This study focused on the rutting properties evaluation of the partial aged binder integrating with engine oil (new and waste sources) using Dynamic Shear Rheometer (DSR). The findings showed that, the addition of WEO affects the rutting performance under ageing condition. From the isochronal curve, the complex modulus, G* of the rejuvenated binder was found lower than the aged binder at un-aged condition. However, after ageing process, the stiffness of the rejuvenated binder was increased and the phase angle, δ decreased obviously compared to virgin binder. The critical temperature of the binder was not differing substantially particularly under ageing. Meanwhile, the ageing index rutting factor (AIRF) clearly summarised that the rejuvenated binder with WEO with higher mass loss more susceptible to ageing.
APA, Harvard, Vancouver, ISO, and other styles
6

Mazumder, Mithil, Raju Ahmed, Moon-Sup Lee, and Soon-Jae Lee. "Optical Characterization of Asphalt Binders Containing Wax Additives." Advances in Civil Engineering 2020 (February 8, 2020): 1–7. http://dx.doi.org/10.1155/2020/4170691.

Full text
Abstract:
In between thermal-oxidative (heat and oxygen) and photo-oxidative (ultraviolet irradiation and oxygen) aging process of bitumen, photo-oxidative aging mainly depends on the optical properties of the asphalt binder. The higher the reflection (or the lower the absorption of the binders), the better the pavement serviceability. The literature review indicates that there is limited research conducted on the optical properties of the binder with wax additives. In this paper, the optical properties of commonly used binders (PG 64-22, Rubber modified binder, and SBS modified binder) containing wax additives (LEADCAP and Sasobit) were investigated using UV-Vis spectrometer. The result of this study showed that (1) the addition of modifiers (crumb rubber and SBS) with the base binder slightly increases the absorption of the binder; (2) the binder types and aging level have significant contribution on optical properties; (3) in general, the aged binders were observed to have higher reflectivity compared to the unaged binders; and (4) the addition of wax additives is observed to have a significant effect on the optical properties.
APA, Harvard, Vancouver, ISO, and other styles
7

Xu, Tao, and Xiaoming Huang. "Combustion properties of asphalt binder containing flame retardant." Fire and Materials 36, no. 2 (March 10, 2011): 97–106. http://dx.doi.org/10.1002/fam.1090.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Enieb, Mahmoud, and Aboelkasim Diab. "Characteristics of asphalt binder and mixture containing nanosilica." International Journal of Pavement Research and Technology 10, no. 2 (March 2017): 148–57. http://dx.doi.org/10.1016/j.ijprt.2016.11.009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fedoruk, R. M., N. V. Pitak, and L. K. Savina. "Corundum refractories with a combined nitride-containing binder." Refractories 36, no. 3 (March 1995): 86–88. http://dx.doi.org/10.1007/bf02307368.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rybalkin, V. P. "Heat-resistant siliceous concrete containing sodium silicate binder." Glass and Ceramics 44, no. 6 (June 1987): 269–72. http://dx.doi.org/10.1007/bf00701425.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Binder-containing"

1

Mehlhorn, Dirk. "DIFFUSION IN COMPLEX PORE SPACES." Doctoral thesis, Universitätsbibliothek Leipzig, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-197447.

Full text
Abstract:
The diffusion behavior of guest molecules introduced in porous materials has been studied. Diffusion studies in such porous materials may help for elucidating the structural properties, transport mechanism and/or surface barriers of the zeolite structure. The focus of this work is on diffusion in nanoporous materials with complex pore spaces. First a short introduction in the basics of diffusion and the PFG NMR technique (Pulsed Field Gradient Nuclear Magnetic Resonance) is described. In the following two chapters the diffusion in hierarchical pore spaces or, to be more precise, zeolites with generated mesopores, which traverse the microporous bulk phase, are investigated. The hierarchical pore spaces consists in the first case of micro- and mesopores and in the second case of micro-, meso- and macropores. The diffusion behavior in these materials has been investigated revealing diffusion acceleration in the mesoporous samples, as compared to the purely microporous material. In the next chapter the diffusion behavior in glass samples with different porosity and their complementary pore space is investigated. Diffusion with full loaded pore spaces and surface diffusion, where the molecules were only able to diffuse along the pore walls, has been explored. The aim was to find out to what extent the diffusion in two complementary pore spaces is correlated. In the last chapter, the effect of an inorganic binder on the transport in zeolite pellets has been studied. First the diffusion behavior in binderless zeolite beads in comparison with the zeolite powder employed for their production has been explored. The particular interest was to find out up to which extent the diffusion patterns observed with the powder samples could again be recognized in the beads. In a second study the transport characteristics within binderless molecular sieves have been investigated, with the purpose to reveal differences in the diffusion behavior in comparison with their binder-containing counterparts.
APA, Harvard, Vancouver, ISO, and other styles
2

IQBAL, KASHIF. "Study of Rheological Behaviour of Coating Paste containing conductive polymer complex." Thesis, Högskolan i Borås, Institutionen Textilhögskolan, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-20146.

Full text
Abstract:
Conducting polymer coating is the new developing area in the field of advanced textiles. In this project the rheological behaviour of paste containing conducting polymer was studied during formulation to coating application. The literature study is done by keeping all the contents of project in mind and a wide area of conductive polymer, coating methods, binder system and rheology modifier is covered. The rheological behaviour of different fluid containing newtanion and non-newtanion behaviour is discussed for better understanding of the project working. Polyester fabric was coated by knife coating method. In paste formulation, the chemicals used were polyurethane binder with two HEUR based rheology modifiers. A lot of experiments were performed to determine the right amount of rheology modifier alone or in combination for paste formulation and coating application and interesting findings were observed during the experimental work which had been justified in results and analysis. After application, the coated fabric was checked for resistivity.
Program: Magisterutbildning i textilteknologi
APA, Harvard, Vancouver, ISO, and other styles
3

Fjellström, Helena. "Inhibition of light-induced colour reversion of wood-containing papers by means of coating." Doctoral thesis, Mittuniversitetet, Institutionen för naturvetenskap, teknik och matematik, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-95.

Full text
Abstract:
The main purpose of this thesis was to find ways to maintain a low level of light‐induceddiscolouration at an increased addition of mechanical and chemimechanical pulps in coated highqualityfine paper and magazine paper grades. Current technology allows the production of highyieldpulps such as thermomechanical and chemimechanical pulps with properties suitable formanufacturing high‐quality paper or paperboard with a low basis weight. Coating of woodcontainingpaper will probably be necessary for photo‐stability reasons if lignin‐containing pulps areto be used as the main fibre furnish in long‐life and high‐value products.In order to find the most suitable pulp for this purpose, light‐induced discolouration of a variety ofpaper samples from unbleached and bleached softwood and hardwood pulps was studied under bothaccelerated and long‐term ambient light‐induced ageing conditions. Hardwood high‐yield pulps,especially aspen pulps, were proven to be more photo‐stable compared to softwood pulps. Hardwoodpulps should therefore be the first choice for applications where a high permanence is desirable.Evaluating ageing characteristics using the CIELAB colour system showed that accelerated ageingconditions tend to mainly increase the b* value and decrease the L* value (i.e. yellow the pulp),whereas long‐term ambient ageing also increases the a* value, which makes the pulp more reddish.A new method for studying the influence of the UV‐screening properties of coating layers on abase paper was developed, and used to investigate the effect of pigment, pigment size distribution,binder and UV‐absorbing additives. The coat weight and pigment type were found to be the mostimportant factors for reducing the transmittance of UV‐radiation. Coating colours containing kaolinpigments had a lower UV‐transmittance than calcium carbonate pigments. Of the calcium carbonates,precipitated calcium carbonates were better than ground calcium carbonates and the difference wasgreater at higher coat weights. The particle size distribution should preferable be narrow. When thebest pigment (bleached kaolin) and the best binder (styrene butadiene latex) were combined withtitanium dioxide, the UV‐transmittance could be reduced by about 90% at a coat weight of ~10 g/m2.At a coat weight close to 20 g/m2, the transmittance was close to zero. This shows that it is possible tomore or less fully protect a double coated base paper from harmful UV‐radiation, when the coatinglayer has an optimum composition for that purpose. A prerequisite to reach so far is that the coatinglayer has an even coat weight.
APA, Harvard, Vancouver, ISO, and other styles
4

Fang-TzuKang and 康芳慈. "Properties of Aged Asphalt Binder Containing Waste Engine Oil." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/9rw2wp.

Full text
Abstract:
碩士
國立成功大學
土木工程學系
107
This research is investigated to use waste engine oil as rejuvenating agent in aged asphalt binder. In this research, the instrument Rolling Thin Film Oven is used to simulate aged process. Then waste engine oil is added to aged asphalt binder. There are several experiments to evaluate the properties of aged asphalt binder containing waste engine oil. From all the test results, we could sort out that waste engine oil can be applied as rejuvenating agent. For both conventional asphalt and modified asphalt, there are no significant difference on mechanical properties and all of results are qualified. What’s more, this research also compared waste engine oil with standard rejuvenating agent RA5 in order to measure the diffusion ability of waste engine oil. It shows that waste engine oil can diffuse well in aged asphalt binder. According to the results, using waste engine oil as rejuvenating agent is feasible in the future.
APA, Harvard, Vancouver, ISO, and other styles
5

Yin, Xin-Hui, and 尹新輝. "Prepration and Application of Activated Carbon Modified by Silver-containing Resin Binder." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/40572050026597704882.

Full text
Abstract:
碩士
國立高雄應用科技大學
化學工程與材料工程系博碩士班
101
In the present study, the activated carbon modified (MAC) by nano-silver containning resin binder developed in our laboratory were successfully synthesized by impregnation process. The characterizations of MAC such as the adsorbed amount of nano-silver resin , specific surface area , iodine value , residual chlorine , amount of nano- silver , dissolution of micro carbon powder , release of silver in water and antibacterial activity towards E. coli were discussed by changing concentration and impreganatioin time of nano-silver resin. The experimental results showed that after impregnation with nano- silver resin , the MAC still maintained a high specific surface area , excellent adsorption capacity ( adsorption of micro carbon powder , iodine value and residual chlorine ) and antibacterial properties . The MAC with 10.1 % of silver resin can be prepared by impreganatioin in 5 wt % resin binder for 60 min. Durring the process of dissolution of micro carbon powder , the solution of MAC kept transparent.The silver release concentration of MAC below 0.05 ppm to fit in with the law of environmental protection, and also achieved excellent antibacterial effect (100 %).
APA, Harvard, Vancouver, ISO, and other styles
6

Mehlhorn, Dirk. "DIFFUSION IN COMPLEX PORE SPACES." Doctoral thesis, 2015. https://ul.qucosa.de/id/qucosa%3A14495.

Full text
Abstract:
The diffusion behavior of guest molecules introduced in porous materials has been studied. Diffusion studies in such porous materials may help for elucidating the structural properties, transport mechanism and/or surface barriers of the zeolite structure. The focus of this work is on diffusion in nanoporous materials with complex pore spaces. First a short introduction in the basics of diffusion and the PFG NMR technique (Pulsed Field Gradient Nuclear Magnetic Resonance) is described. In the following two chapters the diffusion in hierarchical pore spaces or, to be more precise, zeolites with generated mesopores, which traverse the microporous bulk phase, are investigated. The hierarchical pore spaces consists in the first case of micro- and mesopores and in the second case of micro-, meso- and macropores. The diffusion behavior in these materials has been investigated revealing diffusion acceleration in the mesoporous samples, as compared to the purely microporous material. In the next chapter the diffusion behavior in glass samples with different porosity and their complementary pore space is investigated. Diffusion with full loaded pore spaces and surface diffusion, where the molecules were only able to diffuse along the pore walls, has been explored. The aim was to find out to what extent the diffusion in two complementary pore spaces is correlated. In the last chapter, the effect of an inorganic binder on the transport in zeolite pellets has been studied. First the diffusion behavior in binderless zeolite beads in comparison with the zeolite powder employed for their production has been explored. The particular interest was to find out up to which extent the diffusion patterns observed with the powder samples could again be recognized in the beads. In a second study the transport characteristics within binderless molecular sieves have been investigated, with the purpose to reveal differences in the diffusion behavior in comparison with their binder-containing counterparts.
APA, Harvard, Vancouver, ISO, and other styles
7

Lin, Che-Tseng, and 林哲增. "1. Multifunctional Co-poly(amic acid) containing Pyrenyl and Carboxylic Acid as a new Binder for Si-based Micro-Composite Anode of Lithium-Ion Battery2. Synthesis and Characterization of Polymers with Alkyl Main Chain Pendent Bipolar Unit as Host Applications in Electroluminescent Light-Emitting Diodes." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/522bhh.

Full text
Abstract:
博士
國立臺灣大學
高分子科學與工程學研究所
105
There are two subjects in this study. One is the multifunctional co-poly(amic acid) (PAmA) containing pyrene and carboxylic acid side chains that is developed as a binder in the recycled kerf-loss Si-Ni-SiC composite for anode of lithium-ion batteries (LIB). The other is to develop the three polymeric hosts with bipolar abilities, the bipolar function are as pendant group in polystrene (PS) side chain and application in electroluminescent polymer light-emitting device (PLED). Chapter 1 was introduced principle, development, and review of active materials and binders in anode of LIB. In chapter 2, the multifunctional co-PAmA is as binder in Si-Ni Composite anode for LIB. The cycling performance of 300 cycles, electrochemical impedance spectroscopy (EIS) , change of the film morphology after cycling process of 100 cycles by SEM analysis and adhesion strength are discussed. The capacity retention performance comparsion that of sodium-alginate can be apparently enhanced. In a long-cycle test of 300 lithiation/delithiation cycles, 79% of capacity retention is achieved. Small anode thickness expansion of 43% is found in a 100 cycle test, reflecting that the use of the PAmA binder can create strong interconnection among the Si particles, conductive carbons and copper electrode. EIS experiment shows improvement to the higher electric conductivity of polymers containing pyrenyl groups, which also facilitate the dispersion of the conductive carbon additives during mixing. In chapter 3 was introduced principle, development and common materials of organic light-emitting diodes (OLEDs). Also some paper review about employed FIrpic and Ir(ppy)3 as phosphorescent dopant in PLED devices. In Chapter 4, PS-based polymers which are containing bipolar function as a pendant group on the side chain as a host for application in blue- and green-light, as well as thermal activated delayed fluorescence-based (TADF-based) PLED. The bipolar groups contain respectively ortho-substituted of CBZ/1,3,4-oxadiazole (OXD), CBZ/1,2,4-triazole (TAZ) or CBZ/benzimidazole (BZI) to afford the polymers with a bipolar function. CBZ has a high triplet energy (ET) gap and as hole-transporting moiety. On the other hand, the electron-deficient aromatic heterocycles of OXD, TAZ and BZI groups are as an electron-transporting moiety. The thermal stability, photophysical, electrochemical properties and electroluminescent performance in polymers have been discussed. All polymers show good thermal stability with high glass transition temperature (Tg) and decomposition temperature (Td) due to their rigid structure. By ortho-substituted between the bipolar groups can effectively interrupt conjugation length to obtain higher ET. In the electrochemical study, both the oxidation and reduction peak could be measured, indicating the polymers with hole- and electron-transporting abilities. In addition, we found that P-CBZ-OXD have suitable match of energy level than that of P-CBZ-TAZ and P-CBZ-BZI. Therefore, the best device performance of blue phosphorescent consisted of ITO/PEDOT: PSS/P-CBZ-OXD: 20% FIrpic/SPPO13/Mg/Ag that showed the maximum brightness of 1763 cd/m2 and the maximum current efficiency of 11.0 cd/A. For the best device performance of green phosphorescent consisted of ITO/PEDOT: PSS/P-CBZ-OXD: 15% Ir(ppy)3/SPPO13/Mg/Ag that showed the maximum brightness of 7215 cd/m2 and the maximum current efficiency of 23.7 cd/A. On the other hand, a green TADF emitter of 1,2,3,5-tetrakis (carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) was employed as guest, the devices consisted of ITO/PEDOT: PSS/P-CBZ-OXD: 15% 4CzIPN /SPPO13/Mg/Ag that showed the maximum brightness of 5592 cd/m2 and the maximum current efficiency of 27.3 cd/A.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Binder-containing"

1

Armijo, Joseph D. Investigation of large stone-modified asphalt mixes using the Marshall method: Part of permanent deformation (rutting) characteristics of binder-aggregate mixtures containing conventional and modified asphalt binders phase II of cooperative study with the University of California-Berkeley and the California Department of Transportation. [Helena, Mont.]: Montana Dept. of Highways, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Armijo, Joseph D. Investigation of conventional aggregates and modified asphalt mixes using the Marshall method: Part of permanent deformation (rutting) characteristics of binder-aggregate mixtures containing conventional and modified asphalt binders phase I of cooperative study with the University of California-Berkeley and the California Department of Transportation. [Helena, Mont.]: Montana Dept. of Highways, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

The 2006-2011 World Outlook for Firewood, Fuel Wood, and Compressed Logs Containing an Added Binder. Icon Group International, Inc., 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Parker, Philip M. The 2007-2012 World Outlook for Firewood, Fuel Wood, and Compressed Logs Containing an Added Binder. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Parker, Philip M. The 2007-2012 Outlook for Firewood, Fuel Wood, and Compressed Logs Containing an Added Binder in India. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Parker, Philip M. The 2007-2012 Outlook for Firewood, Fuel Wood, and Compressed Logs Containing an Added Binder in Japan. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Parker, Philip M. The 2007-2012 Outlook for Firewood, Fuel Wood, and Compressed Logs Containing an Added Binder in Greater China. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Parker, Philip M. The 2007-2012 Outlook for Firewood, Fuel Wood, and Compressed Logs Containing an Added Binder in the United States. ICON Group International, Inc., 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Williams, R. 101 Music Business Contracts - Updated Edition - Preprinted Binder / CD-ROM set containing over 100 contracts and agreements for recording artist, musicians, ... industry. Entertainment law at it's best! Platinum Millennium, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Binder-containing"

1

Pasetto, Marco, Andrea Baliello, Giovanni Giacomello, and Emiliano Pasquini. "A Rheological Study on Rejuvenated Binder Containing Very High Content of Aged Bitumen." In RILEM Bookseries, 183–88. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-00476-7_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Leegwater, Greet, Jozef Komačka, Gang Liu, Erik Nielsen, and Eva Remišova. "Technical Performance and Benefits of Recycling of Reclaimed Asphalt Containing Polymer-modified Binder in Premium Surface Layers." In Materials and Infrastructures 2, 19–32. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119318613.ch2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mat Zin, Mazni, Mohd Fadzil Arshad, Nadia Zalikha Saifullizam, Adrina Rosseira, and Nurliyana Ismail. "Blended Binder System Containing Palm Oil Fuel Ash (POFA) for Solidification/Stabilization (S/S) Method in Treating Ceramic Sludge." In Regional Conference on Science, Technology and Social Sciences (RCSTSS 2016), 353–60. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0074-5_34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Podolsky, Joseph, Austin Hohmann, Conglin Chen, Zahra Sotoodeh-Nia, Nicholas Manke, Barrie Saw, Nacu Hernandez, et al. "Effect of Soybean Oil Derived Additives on Improved Performance of Polymer-Modified Asphalt Binder and Mix Containing 50% Fine-Graded RAP." In RILEM Bookseries, 615–21. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-46455-4_78.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pasetto, Marco, Giovanni Giacomello, Emiliano Pasquini, and Francesco Canestrari. "Effect of Warm Mix Chemical Additives on the Binder-Aggregate Bond Strength and High-Service Temperature Performance of Asphalt Mixes Containing Electric Arc Furnace Steel Slag." In RILEM Bookseries, 485–96. Dordrecht: Springer Netherlands, 2015. http://dx.doi.org/10.1007/978-94-017-7342-3_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Stimilli, A., G. Ferrotti, D. Radicioni, and F. Canestrari. "Performance evaluation of hot recycled mixtures containing SBS modified binder." In Bituminous Mixtures and Pavements VI, 607–16. CRC Press, 2015. http://dx.doi.org/10.1201/b18538-86.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Orešković, M., G. Mladenović, M. Losa, and S. Bressi. "Optimal waste cooking oil dosage in blends containing aged binder." In Advances in Materials and Pavement Performance Prediction, 233–37. CRC Press, 2018. http://dx.doi.org/10.1201/9780429457791-57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zeng, Menglan, Haozhi Pan, Wei Tian, Junfeng Li, and Jie Zhou. "Properties of asphalt binder and mixture containing bioasphalt derived from castor." In Bio-Based Materials and Biotechnologies for Eco-Efficient Construction, 81–102. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819481-2.00005-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

"Nutrients in Salmonid Ecosystems: Sustaining Production and Biodiversity." In Nutrients in Salmonid Ecosystems: Sustaining Production and Biodiversity, edited by Megan S. Sterling and Kenneth I. Ashley. American Fisheries Society, 2003. http://dx.doi.org/10.47886/9781888569445.ch17.

Full text
Abstract:
<em>Abstract.</em>—A solid briquette fertilizer for use in the Pacific Northwest streams and elsewhere was identified from a variety of slow-release formulations (26 were tested with varying N:P<sub>2</sub>O<sub>5</sub>:K<sub>2</sub>O ratios and binders) using indoor trough and controlled field experiments. The use of a slow-release fertilizer is an innovative method for adding inorganic nutrients to nutrientpoor (oligotrophic) streams to increase autotrophic production and aid in the restoration of salmonid populations. A series of indoor trough experiments demonstrated that the majority of samples containing binders of molasses, hydrated lime, vegetable oil, bentonite, starch, acrawax, candle wax, and Daratak® XB-3631 (unpolymerized Saran™) dissolved too slowly. The fastest dissolution rates occurred with fertilizer briquettes having no binder or vegetable oil. Further trough and field studies using fertilizer with no binder and vegetable oil as binder examined the effects of varying N:P<sub>2</sub>O<sub>5</sub>:K<sub>2</sub>O ratios. Dissolution rates were varied by using different percentages of magnesium ammonium phosphate (MagAmP; its formula 7:40:0 N:P<sub>2</sub>O<sub>5</sub>:K<sub>2</sub>O) and urea (46:0:0). Optimal continual nutrient release for a period of four months was achieved with a fertilizer formulation of 17:30:0 (percent by weight N:P<sub>2</sub>O<sub>5</sub>:K<sub>2</sub>O), with a ratio of 75% MagAmP to 25% urea, and containing no binder. The dissolution rate for this product ranged from 4.6% to 6.6% per week (for field and trough experiments, respectively) in water of 0.15 m/s average velocity. These studies indicate that a slow-release fertilizer product can be manufactured to last approximately four months when applied in the spring to stimulate autotrophic production in nutrient deficient streams, thereby increasing forage and salmonid production.
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, H. "Self-healing property and road performance of asphalt binder and asphalt mixture containing urea-formaldehyde microcapsule." In Eco-Efficient Pavement Construction Materials, 171–96. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-818981-8.00009-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Binder-containing"

1

Ye, Qunshan. "Dynamical characteristics of asphalt binder containing Polyphosphoric acid modifiers." In 5th International Conference on Advanced Design and Manufacturing Engineering. Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/icadme-15.2015.44.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mohammad, Louay N., Mostafa Elseifi, Samuel B. Cooper, III, Harshavardhan Challa, and Prem Naidoo. "Laboratory Evaluation of Asphalt Mixtures Containing Bio-Binder Technologies." In 2013 Airfield & Highway Pavement Conference. Reston, VA: American Society of Civil Engineers, 2013. http://dx.doi.org/10.1061/9780784413005.012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wen, Xiaobo, Haopeng Wang, and Jun Yang. "Electrical Conductivity and Rheological Properties of Asphalt Binder Containing Graphite." In 19th COTA International Conference of Transportation Professionals. Reston, VA: American Society of Civil Engineers, 2019. http://dx.doi.org/10.1061/9780784482292.086.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sutherland, G. T. "Shock Response of a Mock Explosive Containing Sugar and HTPB Binder." In SHOCK COMPRESSION OF CONDENSED MATTER - 2003: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP, 2004. http://dx.doi.org/10.1063/1.1780360.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

KOROBEINICHEV, O., N. ERMOLIN, A. CHERNOV, and I. EMEL'IANOV. "Study of the flame structure of composite systems containing ammonium perchlorate and polybutadiene binder." In 26th Joint Propulsion Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1990. http://dx.doi.org/10.2514/6.1990-1852.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Vansteenkiste, Stefan, Joëlle De Visscher, and Christophe Denayer. "Influence of hydrated lime on the field performance of SMA10 mixtures containing polymer modified binder." In 6th Eurasphalt & Eurobitume Congress. Czech Technical University in Prague, 2016. http://dx.doi.org/10.14311/ee.2016.067.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kataware, Aniket V., and Dharamveer Singh. "Evaluating the Rutting Performance of a Polymer-Modified Binder Containing WMA Additives Using Different Rheological Parameters." In Fourth Geo-China International Conference. Reston, VA: American Society of Civil Engineers, 2016. http://dx.doi.org/10.1061/9780784480014.016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Shrestha, Raghubar, and Peter E. Sebaaly. "A Process to Identify and Verify the Binder Grades of HMA Mixtures Containing Asphalt RAP Materials." In GeoCongress 2008. Reston, VA: American Society of Civil Engineers, 2008. http://dx.doi.org/10.1061/40971(310)135.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lempert, D. B., M. Brambilla, and L. T. DeLuca. "Ballistic effectiveness of Zr-containing composite solid propellants as a function of binder nature and mass fraction." In Progress in Propulsion Physics. Les Ulis, France: EDP Sciences, 2013. http://dx.doi.org/10.1051/eucass/201304015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Habal, Ayyanna, and Dharamveer Singh. "Moisture Susceptibility of a Crumb Rubber Modified Binder Containing WMA Additives Using the Surface Free Energy Approach." In Fourth Geo-China International Conference. Reston, VA: American Society of Civil Engineers, 2016. http://dx.doi.org/10.1061/9780784480052.030.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Binder-containing"

1

Kowalski, Karol, Rebecca McDaniel, and Jan Olek. Determining of the Binder Content of Hot Mix Asphalt Containing Dolomitic Aggregates Using the Ignition Oven. West Lafayette, Indiana: Purdue University, 2011. http://dx.doi.org/10.5703/1288284314259.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sabatini, Jesse J., James M. Raab, and Ronald K. Hann. Mitigation of Single-Point-of-Failure: Development of M127A1 White Star Illuminant Compositions Containing an Epoxy Binder System. Fort Belvoir, VA: Defense Technical Information Center, October 2012. http://dx.doi.org/10.21236/ada575557.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lomboy, Gilson, Douglas Cleary, Seth Wagner, Yusef Mehta, Danielle Kennedy, Benjamin Watts, Peter Bly, and Jared Oren. Long-term performance of sustainable pavements using ternary blended concrete with recycled aggregates. Engineer Research and Development Center (U.S.), May 2021. http://dx.doi.org/10.21079/11681/40780.

Full text
Abstract:
Dwindling supplies of natural concrete aggregates, the cost of landfilling construction waste, and interest in sustainable design have increased the demand for recycled concrete aggregates (RCA) in new portland cement concrete mixtures. RCA repurposes waste material to provide useful ingredients for new construction applications. However, RCA can reduce the performance of the concrete. This study investigated the effectiveness of ternary blended binders, mixtures containing portland cement and two different supplementary cementitious materials, at mitigating performance losses of concrete mixtures with RCA materials. Concrete mixtures with different ternary binder combinations were batched with four recycled concrete aggregate materials. For the materials used, the study found that a blend of portland cement, Class C fly ash, and blast furnace slag produced the highest strength of ternary binder. At 50% replacement of virgin aggregates and ternary blended binder, some specimens showed comparable mechanical performance to a control mix of only portland cement as a binder and no RCA substitution. This study demonstrates that even at 50% RCA replacement, using the appropriate ternary binder can create a concrete mixture that performs similarly to a plain portland cement concrete without RCA, with the added benefit of being environmentally beneficial.
APA, Harvard, Vancouver, ISO, and other styles
4

Lee, Jusang, John E. Haddock, Dario D. Batioja Alvarez, and Reyhaneh Rahbar Rastegar. Quality Control and Quality Assurance of Asphalt Mixtures Using Laboratory Rutting and Cracking Tests. Purdue University, 2019. http://dx.doi.org/10.5703/1288284317087.

Full text
Abstract:
The main objectives of this project were to review the available balanced-mix design (BMD) methodologies, understand the I-FIT and Hamburg Wheel Tracking Test (HWTT) test methods using INDOT asphalt mixtures, and to explore the application of these tests to both a BMD approach and as performance-related Quality Control (QC) and Quality Acceptance (QA) methods. Two QA mixture specimen types, plant-mixed laboratory-compacted (PMLC) and plant-mixed field-compacted (PMFC) were used in the determination of cracking and rutting parameters. Distribution functions for the flexibility index (FI) values and rutting parameters were determined for various mixture types. The effects of specimen geometry and air voids contents on the calculated Flexibility Index (FI) and rutting parameters were investigated. The fatigue characteristics of selected asphalt mixtures were determined using the S-VECD test according to different FI levels for different conditions. A typical full-depth pavement section was implemented in FlexPAVE to explore the cracking characteristics of INDOT asphalt mixtures by investigating the relationship between the FI values of QA samples with the FlexPAVE pavement performance predictions. The FI values obtained from PMFC specimens were consistently higher than their corresponding PMLC specimens. This study also found that FI values were affected significantly by variations in specimen thickness and air voids contents, having higher FI values with higher air voids contents and thinner specimens. These observations do not agree with the general material-performance expectations that better cracking resistance is achieved with lower air voids content and thicker layers. Additionally, PG 70-22 mixtures show the lowest mean FI values followed by the PG 76-22 and 64-22 mixtures. The same order was observed from the ΔTc (asphalt binder cracking index) of INDOT’s 2017 and 2018 projects. Finally, it was found that the HWTT showed reasonable sensitivity to the different characteristics (e.g., aggregate sizes, binder types, and air voids contents) of asphalt mixtures. Mixtures containing modified asphalt binders showed better rut resistance and higher Rutting Resistance Index (RRI) than those containing unmodified binders.
APA, Harvard, Vancouver, ISO, and other styles
5

Kennedy, Alan, Mark Ballentine, Andrew McQueen, Christopher Griggs, Arit Das, and Michael Bortner. Environmental applications of 3D printing polymer composites for dredging operations. Engineer Research and Development Center (U.S.), January 2021. http://dx.doi.org/10.21079/11681/39341.

Full text
Abstract:
This Dredging Operations Environmental Research (DOER) technical note disseminates novel methods to monitor and reduce contaminant mobility and bioavailability in water, sediments, and soils. These method advancements are enabled by additive manufacturing (i.e., three-dimensional [3D] printing) to deploy and retrieve materials that adsorb contaminants that are traditionally applied as unbound powders. Examples of sorbents added as amendments for remediation of contaminated sediments include activated carbon, biochar, biopolymers, zeolite, and sand caps. Figure 1 provides examples of sorbent and photocatalytic particles successfully compounded and 3D printed using polylactic acid as a binder. Additional adsorptive materials may be applicable and photocatalytic materials (Friedmann et al. 2019) may be applied to degrade contaminants of concern into less hazardous forms. This technical note further describes opportunities for U.S. Army Corps of Engineers (USACE) project managers and the water and sediment resource management community to apply 3D printing of polymers containing adsorptive filler materials as a prototyping tool and as an on-site, on-demand manufacturing capability to remediate and monitor contaminants in the environment. This research was funded by DOER project 19-13, titled “3D Printed Design for Remediation and Monitoring of Dredged Material.”
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Binder-containing' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography