Log in

Relevant bibliographies by topics / Biocomposite

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Biocomposite'

Author: Grafiati

Published: 4 June 2021

Last updated: 12 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Biocomposite.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Biocomposite"

1

Kusumaningrum, Wida Banar, Sukma Surya Kusumah, Ismadi Ismadi, Rochmadi Rochmadi, and Subyakto Subyakto. "Thermal Properties of Acetylated Betung Bamboo (Dendrocalamus asper) Pulp – Polypropylene Biocomposites." Jurnal Kimia Sains dan Aplikasi 26, no. 3 (2023): 91–100. http://dx.doi.org/10.14710/jksa.26.3.91-100.

Full text

Abstract:

Thermal properties are important factors to determine the proper manufacturing, processing, and storing of biocomposites. Therefore, the thermal properties of the biocomposite made from acetylated betung bamboo pulp and polypropylene (PP) were investigated. The biocomposite was manufactured by hot pressing at 180 oC for 2 minutes and the fiber contents of the acetylated bamboo pulp used were 10 and 20% according to PP weight. The influence of acetylation and fiber content of bamboo pulp on the thermal properties of the biocomposite were investigated by using differential scanning calorimeter (

APA, Harvard, Vancouver, ISO, and other styles

2

Ahmad Subri, Luqman Hakim, Sakinah Mohd Alauddin, and Senawi Rosman. "The Effect of Methylene Diphenyl Diisocyanate on the Nonisothermal Properties of Polylactic Acid/Elaeis guineensis Fibres Biocomposites." Key Engineering Materials 594-595 (December 2013): 823–27. http://dx.doi.org/10.4028/www.scientific.net/kem.594-595.823.

Full text

Abstract:

Biocomposites demands are significantly rising due to environmental regulations and concerns. However, incompatibility between the fibre and matrix is a major setback that diminishes the biocompostie properties. Therefore in this work, methylene diphenyl diisocynate (MDI) compatibilizers were used together with fibre surface treatment in order to increase compatibility between polylactic acid (PLA) and Elaeis Guineensis Fibres (EGF) biocomposite. Nonisothermal properties were investigated and it was found that, MDI increased compatibility of the PLA and EGF which led to the restriction of chai

APA, Harvard, Vancouver, ISO, and other styles

3

Oyedeji, Oluwafemi A., Xianhui Zhao, Jenesis Cochrane, et al. "Epoxy Coating of Biofiber: An Effective Modifier of Biofiber Physical and Flow Properties for Improved Tensile Behavior of Biofiber-Reinforced Biocomposite." Journal of the ASABE 67, no. 6 (2024): 1447–58. http://dx.doi.org/10.13031/ja.16018.

Full text

Abstract:

HighlightsLoblolly pine and corn stover fiber were successfully surface-treated with epoxy.Surface-treated fibers produced biocomposites with improved tensile properties.Surface treatment process results in a more evenly dispersed fiber bulk structure.Tensile strength and Young’s modulus of the biocomposite reached 58 MPa and 5 GPa, respectively.Abstract. Biocomposites combine renewable, plant-based fibers with degradable polymers and are an attractive option for sustainable, lightweight, and cost-effective materials with a low carbon footprint, especially for large-scale additive manufacturin

APA, Harvard, Vancouver, ISO, and other styles

4

Kashytskyi, V., О. Sadova, and V. Shehynskyi. "The development of glutin-based biocomposite materials with advanced hydrophobicity." Товарознавчий вісник 17, no. 1 (2024): 27–35. http://dx.doi.org/10.62763/ef/1.2024.27.

Full text

Abstract:

Biocomposite materials, which contain components of natural origin, have low resistance to water absorbtion due to high lyophilicity of components. It leads to quick destruction of biocomposite products under the conditions of high humidity exploitation that defines the necessity and importance of conducting scientific research in this sphere. The aim of the article is to research the hydrophobic additives influence on the compressive strength and hygroscopicity of biocomposite materials consisting of glutin matrix (100 parts by weight) and wood flour (100 parts by weight). The technology of f

APA, Harvard, Vancouver, ISO, and other styles

5

Espinosa-Navarro, Ana Teresa, María del Carmen Díaz-Nava, Yolanda Alvarado-Pérez, Claudia Muro-Urista, and José Juan García Sánchez. "Polymer-cellulosic-clay and polymer-cellulosic-zeolitic biocomposites for the removal of methylene blue in aqueous solution." MRS Advances 4, no. 61-62 (2019): 3417–21. http://dx.doi.org/10.1557/adv.2019.423.

Full text

Abstract:

ABSTRACTIn the present investigation, biocomposites were synthesized from a polymeric alginate matrix in which the carrot residue and a natural bentonite (ANat / Bio) or an iron-modified clinoptilolite-type zeolite (ZFe / Bio) were supported. Their properties were evaluated adsorbents in contact with aqueous solutions of methylene blue (MB). In the first hour of contact, 46% removal was obtained for the ZFe / Bio biocomposite and 60% for the ANat / Bio biocomposite; reaching 100% removal for the ZFe / Bio biocomposite and 98% for the ANat / Bio biocomposite after 24 hours. The biocomposites we

APA, Harvard, Vancouver, ISO, and other styles

6

Yang, Zhaozhe, Xinhao Feng, Min Xu, and Denis Rodrigue. "Printability and properties of 3D-printed poplar fiber/polylactic acid biocomposite." BioResources 16, no. 2 (2021): 2774–88. http://dx.doi.org/10.15376/biores.16.2.2774-2788.

Full text

Abstract:

To efficiently and economically utilize a wood-plastic biocomposite, an eco-friendly biocomposite was prepared using modified poplar fiber and polylactic acid (PLA) via 3D printing technology for the first time. First, the effects of poplar fiber (0, 1, 3, 5, 7, and 9%) on the mechanical and rheological properties of the printed biocomposites were investigated. Subsequently, the printing parameters, including printing temperature, speed, and layer thickness, were optimized to obtain the biocomposite with superior properties. Finally, four printing orientations were applied to the biocomposite

APA, Harvard, Vancouver, ISO, and other styles

7

Hastu, Muhammad Oktaviano Putra, Josua Billion Silitonga, Mochamad Asrofi, Dedi Dwi Laksana, Revvan Rifada Pradiza, and Haris Setyawan. "MECHANICAL PROPERTIES OF BIOCOMPOSITES WITH UNSATURATED VINYL ESTER MATRIX REINFORCED WITH DURIAN SKIN FIBER AS A GREEN COMPOSITE APPLICATION." Proceeding of International Conference on Artificial Intelligence, Navigation, Engineering, and Aviation Technology (ICANEAT) 1, no. 1 (2024): 137–40. http://dx.doi.org/10.61306/icaneat.v1i1.220.

Full text

Abstract:

   In this study, a biocomposite based on vinylester fortchem 411 VE filled with durian skin fiber (DSF) was successfully synthesized using the casting method with the aid of a catalyst to accelerate the biocomposite fabrication process. DSF was treated with 7% NaOH. The biocomposite was loaded separately with treated DSF at 3 to 6% by weight, and its tensile properties were investigated. The tensile strength and elastic modulus of the biocomposite decreased with the addition of DSF particles, and lower values were found compared to the matrix. Additionally, alkali treatment

APA, Harvard, Vancouver, ISO, and other styles

8

Ismail, Ismail, Desti Mutiara, Adi Rahwanto, Zulkarnain Jalil, Syarifah Fathmiyah, and Siti Hajar Sheikh Md Fadzullah. "Effect of Filler Size on the Properties of Oil Palm Empty Fruit Bunch High-Load Filler Biocomposite." Trends in Sciences 22, no. 4 (2025): 9374. https://doi.org/10.48048/tis.2025.9374.

Full text

Abstract:

This work aimed to study the effect of filler size on the performance of an empty palm oil fruit bunch (OPEFB) high-load filler epoxy resin biocomposite (80 vol.% OPEFB and 20 vol.% epoxy resin). The particle sizes of OPEFBs used to prepare the biocomposites were 60, 80, 100, 120 and 140 mesh. The biocomposite samples were prepared by the press method. The physical (density, porosity, thickness swelling), mechanical, and thermal properties of the biocomposite were evaluated. A universal testing machine, thermogravimetric analysis, and scanning electron microscopy were utilized to characterize

APA, Harvard, Vancouver, ISO, and other styles

9

Masturi, Dante Alighiri, Riful Mazid Maulana, Susilawati, Apriliana Drastisianti, and Sunarno. "The effect of polyurethane binder and glass fiber reinforcement on physical and mechanical properties of mahogany (Swietenia mahagoni) leaves waste biocomposite." Materials Express 10, no. 11 (2020): 1900–1910. http://dx.doi.org/10.1166/mex.2020.1826.

Full text

Abstract:

In this work, the effect of polyurethane binder and glass fiber as reinforcement on the physical and mechanical properties of mahogany (Swietenia mahagoni) leaves waste as biocomposite was investigated. Mahogany leaves waste has been successfully synthesized into a strong and lightweight biocomposite material by using a polyurethane binder and glass fiber as reinforcement. The mass content of polyurethane was varied between 0.25?1.50 g to obtain the optimum conditions. The contents of glass fiber added were between 0.1?0.5 g for biocomposite reinforcement. The addition of polyurethane and glas

APA, Harvard, Vancouver, ISO, and other styles

10

Ghasemi, Shokoofeh, Mukund P. Sibi, Chad A. Ulven, Dean C. Webster, and Ghasideh Pourhashem. "A Preliminary Environmental Assessment of Epoxidized Sucrose Soyate (ESS)-Based Biocomposite." Molecules 25, no. 12 (2020): 2797. http://dx.doi.org/10.3390/molecules25122797.

Full text

Abstract:

Biocomposites can be both environmentally and economically beneficial: during their life cycle they generally use and generate less petroleum-based carbon, and when produced from the byproduct of another industry or recycled back to the manufacturing process, they will bring additional economic benefits through contributing to a circular economy. Here we investigate and compare the environmental performance of a biocomposite composed of a soybean oil-based resin (epoxidized sucrose soyate) and flax-based reinforcement using life cycle assessment (LCA) methodology. We evaluate the main environm

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Biocomposite"

1

Stephens, Brian Dominic. "BIOCOMPOSITE PROTON EXCHANGE MEMBRANES*." University of Cincinnati / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1147968573.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Pineda, Rocio Nahir. "Biocomposite with Continuous Spun Cellulose Fibers." Thesis, Luleå tekniska universitet, Materialvetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-80968.

Full text

Abstract:

The subject of this project is to study spun cellulose fibers made by Spinnova Oy inFinland. The fibers are spun using an environmentally friendly spinning process withoutuse of harsh chemicals.The spun filaments and the yarn based on these filaments were characterized and usedas reinforcement in polylactic acid biopolymer (PLA) and in biobased epoxy resin. Acomprehensive mechanical and morphological characterization of the single filamentsand their yarn was conducted. It was found that the single filaments are flat with a largewidth/thickness ratio, they are porous especially on one side and

APA, Harvard, Vancouver, ISO, and other styles

3

Do, Quang minh. "Etude des matériaux composites de matrices polymères issues de ressources renouvelable et fibres de bambou." Thesis, Reims, 2016. http://www.theses.fr/2016REIMS015/document.

Full text

Abstract:

Dans cette étude, les matériaux composites poly 3-hydroxybutyrate-co-4-hydroxybutyrate (P34HB) / fibres de bambou et polybutylène succinate (PBS) / fibres de bambou ont été préparés en utilisant le mélangeur interne et le moulage par compression. Les propriétés thermo-mécaniques de P34HB et de PBS ont été caractérisées. Les fibres de bambou ont été modifiées par des traitements chimiques. Les propriétés mécaniques telles que la résistance à la traction, la résistance à la flexion, le module d’élasticité et les propriétés thermiques ont été étudiées. Pour les deux types de composites (P34HB et

APA, Harvard, Vancouver, ISO, and other styles

4

Lönnberg, Hanna. "Ring-opening polymerization from cellulose for biocomposite applications." Doctoral thesis, KTH, Ytbehandlingsteknik, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-10455.

Full text

Abstract:

There is an emerging interest in the development of sustainable materials with high performance. Cellulose is promising in this regard as it is a renewablere source with high specific properties, which can be utilized as strong reinforcements in novel biocomposites. However, to fully exploit the potential ofcellulose, its inherent hydrophilic character has to be modified in order toimprove the compatibility and interfacial adhesion with the more hydrophobicpolymer matrices commonly used in composites.In this study, the grafting of poly(ε-caprolactone) (PCL) and poly(L-lactide)(PLLA) from cellu

APA, Harvard, Vancouver, ISO, and other styles

5

Ton, That Peter Tuan. "Fatigue characterisation of bioactive HAPEX'T'M composite." Thesis, Queen Mary, University of London, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341932.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Marais, Andrew. "Xyloglucan modification using controlled polymer grafting for biocomposite applications." Thesis, KTH, Centrum för Biofibermaterial, BiMaC, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-90872.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Chan, Kyle E. "Development, testing, and numerical modeling of a foam sandwich biocomposite." Thesis, California State University, Long Beach, 2014. http://pqdtopen.proquest.com/#viewpdf?dispub=1527682.

Full text

Abstract:

<p> This study develops a novel sandwich composite material using plant based materials for potential use in nonstructural building applications. The face sheets comprise woven hemp fabric and a sap based epoxy, while the core comprises castor oil based foam with waste rice hulls as reinforcement. Mechanical properties of the individual materials are tested in uniaxial compression and tension for the foam and hemp, respectively. The sandwich composite is tested in 3 point bending. Flexural results are compared to a finite element model developed in the commercial software Abaqus, and the valid

APA, Harvard, Vancouver, ISO, and other styles

8

Martinsdotter, Linnea. "Fiber based biocomposite material with water and grease barrier properties." Thesis, KTH, Fiber- och polymerteknologi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-298184.

Full text

Abstract:

Syftet med denna studie var att utveckla en biokomposit med både fett-och vattenbarriär. Material med dessa egenskaper innehåller idag ofta PFAS-molekyler (per- och polyfluorerade alkylsubstanser). Det är av stor betydelse att byta ut dessa mot ett biobaserat alternativ då de är giftiga och ackumuleras i naturen. Biokompositen utvecklades genom att kombinera icke-trä pappersmassa (75%) och trä pappersmassa (25%) som matris. Därefter tillsattes olika biobaserade additiv i våtände för att påverka materialets egenskaper. Proverna testades på deras dragstyrka, vattenavvisning och fettavvisning. De

APA, Harvard, Vancouver, ISO, and other styles

9

Duan, Pengfei. "Modelling and experimental characterization of nanoindentation responses of various biocomposite materials." Thesis, University of Newcastle upon Tyne, 2018. http://hdl.handle.net/10443/4095.

Full text

Abstract:

In the past decades, composite materials (which are usually classified into fibre-reinforced composites and particle-reinforced composites, depending on the geometry of the reinforcements) have been widely applied in tissue engineering as implant scaffolds. A lot of work has been done on the bulk mechanical properties of these composites. However, there is lack of nanomechanical characterization of such composites, which is crucial for understanding the cell-material interactions at small scale, and further optimizing the design of scaffold materials to promote the formation of new viable tiss

APA, Harvard, Vancouver, ISO, and other styles

10

Sweeney, Benjamin Andrew. "The Effect of Biocomposite Material In A Composite Structure Under Compression Loading." DigitalCommons@CalPoly, 2017. https://digitalcommons.calpoly.edu/theses/1932.

Full text

Abstract:

While composite structures exhibit exceptional strength and weight saving possibilities for engineering applications, sometimes their overall cost and/or material performance can limit their usage when compared to conventional structural materials. Meanwhile ‘biocomposites’, composite structures consisting of natural fibers (i.e. bamboo fibers), display higher cost efficiency and unique structural benefits such as ‘sustainability’. This analysis will determine if the integration of these two different types of composites are beneficial to the overall structure. Specifically, the structure will

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Biocomposite"

1

Hameed Sultan, Mohamed Thariq, Mohd Shukry Abdul Majid, Mohd Ridzuan Mohd Jamir, Azwan Iskandar Azmi, and Naheed Saba, eds. Biocomposite Materials. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4091-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Venkatesan, Jayachandran, ed. Biocomposite Nanomaterials and their Applications. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-74356-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

1934-, Imanishi Y., ed. Synthesis of biocomposite materials: Chemical and biological modifications of natural polymers. CRC Press, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Mukbaniani, Omar, Tamara Tatrishvili, Neha Kanwar Rawat, and A. K. Haghi. Biocomposites. Apple Academic Press, 2023. http://dx.doi.org/10.1201/9781003408512.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Jawaid, Mohammad, Salit Mohd Sapuan, and Othman Y. Alothman, eds. Green Biocomposites. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-46610-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Jawaid, Mohammad, Mohd Sapuan Salit, and Othman Y. Alothman, eds. Green Biocomposites. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-49382-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Sriariyanun, Malinee, Sanjay Mavinkere Rangappa, Suchart Siengchin, and Hom Nath Dhakal. Value-Added Biocomposites. CRC Press, 2021. http://dx.doi.org/10.1201/9781003137535.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Muthukumar, Chandrasekar, Senthil Muthu Kumar Thiagamani, Senthilkumar Krishnasamy, and Ahmad Ilyas Bin Rushdan. Epoxy-Based Biocomposites. CRC Press, 2023. http://dx.doi.org/10.1201/9781003271017.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Krishnasamy, Senthilkumar, Chandrasekar Muthukumar, Senthil Muthu Kumar Thiagamani, and Suchart Siengchin. Polyester-Based Biocomposites. CRC Press, 2023. http://dx.doi.org/10.1201/9781003270980.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

T, Lau Alan K., Hussain Farzana, and Lafdi Khalid, eds. Nano- and biocomposites. CRC Press, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Biocomposite"

1

Dunlop, Matthew J., Bishnu Acharya, and Rabin Bissessur. "Effect of Cellulose Nanocrystals on the Mechanical Properties of Polymeric Composites." In Biocomposite Materials. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4091-6_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Dahy, Hanaa. "Towards Sustainable Buildings with Free-Form Geometries: Development and Application of Flexible NFRP in Load-Bearing Structures." In Biocomposite Materials. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4091-6_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hemmati, Farkhondeh, Tara Farizeh, and Jamshid Mohammadi-Roshandeh. "Lignocellulosic Fiber-Reinforced PLA Green Composites: Effects of Chemical Fiber Treatment." In Biocomposite Materials. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4091-6_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Reddy, Narendra. "PLA Hybrid Composites Reinforced with Nanomaterials." In Biocomposite Materials. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4091-6_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Mugeshwaran, A., Nalini Ranganathan, R. Joseph Bensingh, and Sanjay K. Nayak. "3D Printing of Continuous Natural Fibre Reinforced Biocomposites for Structural Applications." In Biocomposite Materials. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4091-6_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Mamat, N., M. Mariatti, Z. A. A. Hamid, and B. H. Yahaya. "Enhancement of Local Drug Delivery System Using Different Design of Gentamicin Loaded in Carbonate Apatite Scaffold." In Biocomposite Materials. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4091-6_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Liza, Shahira, and Nur Hidayah Shahemi. "Carbon-Based Materials Reinforced Ultrahigh Molecular Weight Polyethylene and Biocomposites." In Biocomposite Materials. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4091-6_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Versino, Florencia, Olivia Valeria López, and María Alejandra García. "Green Biocomposites for Packaging Applications." In Biocomposite Materials. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4091-6_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Jusoh, Suriani Mat. "Manufacturing Defects in Natural Fibre Composites." In Biocomposite Materials. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4091-6_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Robiah Mohamad, Che Wan Sharifah. "Synthesis, Characterization, in Vitro Biocompatibility and Antibacterial Properties Study of Nanocomposite Materials." In Biocomposite Materials. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4091-6_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Biocomposite"

1

Chiujdea, Ruxandra, Konrad Sonne, Paul Nicholas, Carl Eppinger, and Mette RamsgaardThomsen. "Design Strategies for Repair of 3D Printed Biocomposite Materials." In CAADRIA 2024: Accelerated Design. CAADRIA, 2024. http://dx.doi.org/10.52842/conf.caadria.2024.3.311.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Massin, Peter, and Kilian Bauer. "Morphology and Ornamentation: Robotic fabrication of a biocomposite relief." In eCAADe 2024: Data-Driven Intelligence. eCAADe, 2024. http://dx.doi.org/10.52842/conf.ecaade.2024.1.115.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Biswas, Chandan. "Evidence of six orders of magnitude photoconductivity in DNA-MoS2 hydrogel nano-biocomposite." In Organic and Hybrid Sensors and Bioelectronics XVII, edited by Ioannis Kymissis, Emil J. List-Kratochvil, and Sahika Inal. SPIE, 2024. http://dx.doi.org/10.1117/12.3027712.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Anerao, Prashant, Atul Kulkarni, Yashwant Munde, Namrata Kharate, and Omkar Wagh. "A Machine Learning Approach to Compressive Strength Prediction of 3D-Printed Biocha-Reinforced PLA Biocomposite." In 2024 IEEE Pune Section International Conference (PuneCon). IEEE, 2024. https://doi.org/10.1109/punecon63413.2024.10895167.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Tan, Chuheng, Quan Zhou, and Haipeng Zhong. "RE-MYCE: Mycelium Biocomposite Based Façade System Optimization for Land-slide-Resistant Structure in Yunnan Mountainous Region." In CAADRIA 2024: Accelerated Design. CAADRIA, 2024. http://dx.doi.org/10.52842/conf.caadria.2024.3.211.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Imoisili, Patrick, Emeka Nwanna, George Enebe, and Tien-Chien Jen. "Investigation of the Acoustic Performance of Plantain (Musa Paradisiacal) Fibre Reinforced Epoxy Biocomposite." In ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-94773.

Full text

Abstract:

Abstract Sound is produced by the fluctuation of oscillation waves caused by variations in pressure in a medium containing various frequency ranges, which can be detected by either an animal or a human auditory apparatus and then transferred to the brain for analysis. Noise can be diminished and controlled by using absorptive materials. This is necessary because noise has a negative effect on public health, sharing of knowledge, and serenity, and it is getting worse every day as a result of urbanization and increased affiliated functions. Utilization of natural and synthetic reinforced polymer

APA, Harvard, Vancouver, ISO, and other styles

7

Nouri, Mustapha, and Mahfoud Tahlaiti. "A Dual-Scale Numerical Model for the Diffusive Behaviour Prediction of Biocomposites Based on Randomly Oriented Fibres." In 4th International Conference on Bio-Based Building Materials. Trans Tech Publications Ltd, 2022. http://dx.doi.org/10.4028/www.scientific.net/cta.1.584.

Full text

Abstract:

This work aims to present a multi-scale numerical approach based on a 2D finite element model to simulate the diffusive behaviour of biocomposites based on randomly dispersed Diss fibres during ageing in water. So, first of all, the diffusive behaviour of each phase (fibres/matrix) as well as of the biocomposite was determined experimentally. Secondly, the microstructure of the biocomposite was observed by optical microscope and scanning electron microscope (SEM), and then regenerated in a Digimat finite element calculation software thanks to its own fibre generator: "Random fibre placement".

APA, Harvard, Vancouver, ISO, and other styles

8

WALCZYK, DANIEL, RONALD BUCINELL, STEVEN FLEISHMAN, and SHARMAD JOSHI. "A CASE STUDY OF BIOCOMPOSITE MATERIAL USE IN AUTOMOTIVE APPLICATIONS." In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35865.

Full text

Abstract:

Interest in biocomposites is growing worldwide as companies that manufacture high-performance products seek out more sustainable material options. Although there is significant research on biocomposite material options and processing found in the literature from at least the last two decades, there are few experimentally based case studies published to help guide product designers and engineers when considering these materials. This paper discusses the use of biocomposites in the seat of an electric bus. Although it is clear that biocomposite material options are quite limited, the authors eve

APA, Harvard, Vancouver, ISO, and other styles

9

Dahy, Hanaa, Piotr Baszyñski, and Jan Petrš. "Experimental Biocomposite Pavilion." In ACADIA 2019: Ubiquity and Autonomy. ACADIA, 2019. http://dx.doi.org/10.52842/conf.acadia.2019.156.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Popescu, Mihaela. "UTILIZATION�PROBLEMS�OF�BIOCOMPOSITE�MATERIALS�." In SGEM2012 12th International Multidisciplinary Scientific GeoConference and EXPO. Stef92 Technology, 2012. http://dx.doi.org/10.5593/sgem2012/s21.v4021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Biocomposite"

1

Henna, Phillip H. Novel Bioplastics and biocomposites from Vegetable Oils. Office of Scientific and Technical Information (OSTI), 2008. http://dx.doi.org/10.2172/939375.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Catherine Euale, Catherine Euale. Improving the qualitative properties of mycelium skins through fungal-bacterial biocomposites. Experiment, 2022. http://dx.doi.org/10.18258/27619.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Petr, Pantyukhov, Shelenkov Pavel, Khaidarov Bekzod, and Popov Anatoly. Evaluation of biocomposites' defectiveness, the effect of defectiveness on water absorption. Peeref, 2023. http://dx.doi.org/10.54985/peeref.2307p5146647.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Menendez, A., M. Coello, J. Suarez, et al. Processability and mechanical properties of spent coffee ground (SCG) and polypropylene biocomposites. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.gs.bbb.5.

Full text

Abstract:

The circular economy encourages optimizing use of plastics, waste reduction, sustainable materials, and processing of plastic products. In this framework, the use of agricultural waste materials promotes waste reduction and eco-design in plastic product manufacturing. This study researched the preparation of an isotatic polypropylene (PP) matrix (MFI 50 grade) with spent coffee grounds (SCG) and various commercial additives. The biocomposites were analyzed to evaluate their mechanical properties and processability. PP and SCG composites were synthesized with 30% SCG content with maleic anhydri

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!