Log in

Relevant bibliographies by topics / Bleaching Powder Manufacturing Plant Cost / Journal articles

To see the other types of publications on this topic, follow the link: Bleaching Powder Manufacturing Plant Cost.

Journal articles on the topic 'Bleaching Powder Manufacturing Plant Cost'

Author: Grafiati

Published: 5 June 2025

Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 19 journal articles for your research on the topic 'Bleaching Powder Manufacturing Plant Cost.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Shulunov, Vyacheslav R. "A Roll Powder Sintering Additive Manufacturing Technology." Applied Mechanics and Materials 789-790 (September 2015): 1212–16. http://dx.doi.org/10.4028/www.scientific.net/amm.789-790.1212.

Full text

Abstract:

This paper describes the roll powder sintering (RPS) technology providing breakthrough advantages for dominant rapid prototyping and manufacturing (RP&M) processes that are currently on the market. The RPS based on ribbon perforation where a powder needs to be poured, while it is being rewound. When the whole component roll is rewound, it is ready for a sintering plant. This technology has increased reliability, higher precision up to 77000 dpi, lower cost and power consumption. Processing time of plastic, ceramic, metal and other objects 1 m3 (or more) in volume directly from a 3D CAD mod

APA, Harvard, Vancouver, ISO, and other styles

2

Wang, Hai Tao, Shi Feng Xu, and Li Ping Huang. "Renovation Design of Coal Powder Conveyor Bearing Support." Applied Mechanics and Materials 120 (October 2011): 335–38. http://dx.doi.org/10.4028/www.scientific.net/amm.120.335.

Full text

Abstract:

The bearing support breakage of screw coal powder conveyor in power plant boiler went through four stages: axial displacement of shaft sleeve, shaft sleeve wearing by shield ring and by bearing, and the wearing of skeleton seal rings and dustproof felts by shaft sleeve. By analyzing the wearing characters of each part, the renovation structure was designed. The bearing settled style was changed from using shield ring to using locknut by designing convex sidestep on the shaft sleeve, preventing the axial from drifting. Substituting for the welding assembly, the bolt connecting between the cover

APA, Harvard, Vancouver, ISO, and other styles

3

Huber, Korbinian, Stefan Stojcevic, Michael Wolf, and Arno Kwade. "Dry Battery Electrode Manufacturing Enabled By Continuous Powder Mixing." ECS Meeting Abstracts MA2023-01, no. 2 (2023): 539. http://dx.doi.org/10.1149/ma2023-012539mtgabs.

Full text

Abstract:

Lithium-Ion Battery electrode manufacturing is a cost- and energy-intensive process that usually relies on the use of a hazardous and expensive solvent, N-methyl-2-pyrrolidone (NMP), for cathodes. After coating the battery-slurry to a current collector, the solvent needs to be evaporated to obtain a porous electrode suitable for the use in a Lithium-Ion Battery. The solvent is a processing material and unwanted in the final product. In fact, solvent residues can fuel parasitic side-reactions within the battery cell and hence deteriorate battery lifetime and safety. The utilization of NMP in ba

APA, Harvard, Vancouver, ISO, and other styles

4

Abdel-Naeem, Heba H. S., Hend Ali Elshebrawy, Kálmán Imre, et al. "Antioxidant and Antibacterial Effect of Fruit Peel Powders in Chicken Patties." Foods 11, no. 3 (2022): 301. http://dx.doi.org/10.3390/foods11030301.

Full text

Abstract:

Meat industries are eager to find natural low-cost additives for improving the health benefits and shelf life of meat products. The present study elucidated the effect of four different fruit peel powders, namely lemon, orange, grapefruit, and banana (1% each), on the oxidative stability, microbial quality, physicochemical properties, and sensory attributes of chicken patties during 3 months of storage at −18 °C. The total phenolics and flavonoids as well as the antioxidant activity of the fruit peel powders were analyzed. The lemon peel powder contained the highest bioactive substance (90.5 m

APA, Harvard, Vancouver, ISO, and other styles

5

Moshiri, Mandaná, Mohsin Raza, Mohamed Sahlab, Ali Ahmad Malik, Arne Bilberg, and Guido Tosello. "Value Chain Comparison of Additively and Conventionally Manufactured Multi-Cavity Tool Steel Inserts: An Injection Molding Industrial Case Study for High-Volume Production." Applied Sciences 12, no. 20 (2022): 10410. http://dx.doi.org/10.3390/app122010410.

Full text

Abstract:

The development of injection molding tools is an expensive, time-consuming, and resource-intensive process offering little to no flexibility to adapt to variations in product design. Metal additive manufacturing can be used to produce these tools in a cost-effective way. Nevertheless, in an industrial context, effective methods are missing for the selection of the most suitable technology for the given tooling project. This paper presents a method to compare process chains based on additive and conventional subtractive technologies for the manufacturing of metal tooling for injection molding.

APA, Harvard, Vancouver, ISO, and other styles

6

Amar, Ibrahim A., Salma M. Hassan, Fatima H. Aqeela, Mohamed Y. Najem, and Fatima A. Altohami. "Removal of methylene blue using balanites aegyptiaca bark powder as low-cost and eco-friendly biosorbent." Research Journal of Textile and Apparel 26, no. 1 (2021): 1–17. http://dx.doi.org/10.1108/rjta-07-2020-0075.

Full text

Abstract:

Purpose This paper aims to investigate the potential application of Balanites aegyptiaca bark powder (BABP) for removing a basic textile dye, methylene blue (MB), from aqueous solutions. Design/methodology/approach The biosorbent (BABP) was characterized using Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pHPZC). Batch mode was selected to study the biosorption of MB onto BABP surface at different experimental conditions (shaking speed, contact time, initial solution pH, ionic strength, solution temperature, biosorbent dosage and initial dye concentration). Besides,

APA, Harvard, Vancouver, ISO, and other styles

7

Thuy, Nguyen Minh, Vo Quoc Tien, Ngo Van Tai, and Vo Quang Minh. "Effect of Foaming Conditions on Foam Properties and Drying Behavior of Powder from Magenta (Peristropheroxburghiana) Leaves Extracts." Horticulturae 8, no. 6 (2022): 546. http://dx.doi.org/10.3390/horticulturae8060546.

Full text

Abstract:

In manufacturing food powders, foam-mat drying provides a cost-effective alternative to traditional drying methods. This study aimed to select the foaming conditions which support the subsequent drying of Magenta leaves extract. In the initial stage, concentrations of egg albumin (5 to 15%) as a foaming agent, xanthan gum as foam stabilizer (0.1 to 0.5%), and whipping time (2 to 8 min) were designed. Multiple regression analysis was applied to analyze the relationship between the dependent variables (Foam expansion volume and foam density) and three independent variables as an indicator of foa

APA, Harvard, Vancouver, ISO, and other styles

8

Md., Rubel Alam, Islam Tarikul, Rahman Mahbubur, Abdullah Al Noman Antor Md., Rahman Rifat, and Ahmed Tamanna Taslima. "Sustainable denim fabric washing with post-used rubber shoe sole: An eco-friendly alternative of Pumice stone." Indian Journal of Science and Technology 13, no. 48 (2021): 4723–31. https://doi.org/10.17485/IJST/v13i48.1974.

Full text

Abstract:

Abstract <strong>Background/Objective:</strong> Denim fabric is the most versatile dress material and acclaimed the most popular among the young generations due to its trendy looks. Since stone is being vastly used to improve the softness and comfort feeling along with fading effects, but bearing some problems. For instance, stone leads to deterioration of fabric strength, machine wear, and tear, grit deposition in the effluent plant, increasing labor cost to separate the stone powder from the pockets, and also harmful for the expensive laundry machine, etc. On the contrary, post-used rub

APA, Harvard, Vancouver, ISO, and other styles

9

Aralbayev, Nurbek, Fatima Dikhanbayeva, Yus Aniza Binti Yusof, Aigul Tayeva, and Zhuldyz Smailova. "Devising optimal technological parameters for spray drying to produce whole camel milk powder." Eastern-European Journal of Enterprise Technologies 4, no. 11(112) (2021): 82–91. http://dx.doi.org/10.15587/1729-4061.2021.238686.

Full text

Abstract:

Camel milk is a valuable source of protein and nutrients, it has therapeutic and prophylactic properties. The production of dry dairy products based on camel milk implies prolonging its shelf life, a decrease in the cost of its transportation and storage. To manufacture dry camel milk, it is necessary to optimize the technological parameters of drying, which affect its physical-chemical properties. Whole milk from camels (Camelus dromedarius) was dried on a spray drying plant under the following modes: the inlet temperature from 140 °C to 160 °C; the feed rate from 30 ml/min to 40 ml/min. The

APA, Harvard, Vancouver, ISO, and other styles

10

Nurbek, Aralbayev, Dikhanbayeva Fatima, Aniza Binti Yusof Yus, Tayeva Aigul, and Smailova Zhuldyz. "Devising optimal technological parameters for spray drying to produce whole camel milk powder." Eastern-European Journal of Enterprise Technologies 4, no. 11 (113) (2021): 82–91. https://doi.org/10.15587/1729-4061.2021.238686.

Full text

Abstract:

Camel milk is a valuable source of protein and nutrients, it has therapeutic and prophylactic properties. The production of dry dairy products based on camel milk implies prolonging its shelf life, a decrease in the cost of its transportation and storage. To manufacture dry camel milk, it is necessary to optimize the technological parameters of drying, which affect its physical-chemical properties. Whole milk from camels (Camelus dromedarius) was dried on a spray drying plant under the following modes: the inlet temperature from 140 °C to 160 °C; the feed rate from 30 ml

APA, Harvard, Vancouver, ISO, and other styles

11

Ortiz-Cañavate, Jaime, Santiago Ferrándiz, Carlos Cambralla, and Javier Igual. "Quality Comparison of Three Metal Additive Manufacturing Technologies on an Automotive Sealant Nozzle." Key Engineering Materials 956 (September 29, 2023): 41–50. http://dx.doi.org/10.4028/p-pj7o3d.

Full text

Abstract:

Additive Manufacturing (AM) [1] is playing every day a bigger role in the automotive industry because of its cost competitiveness, short delivery lead times and potential for design flexibility and optimization. Plastics and polymers are the most common materials used to produce AM parts in this sector, however metal AM is increasing its importance as there are specific applications that require mechanical characteristics that can only be achieved with metals such as stainless steel, titanium, hard steel, copper, aluminum, and others. There is an increasing number of metal AM technologies and

APA, Harvard, Vancouver, ISO, and other styles

12

Teshome, Zerihun, Fitsum Etefa Ahmed, Tamrat Tesfaye, Lioul Getachew, Awoke Fenta Wodag, and Misganaw Bitew. "Preparation of Sheepskin Unhairing Extracts from Locally Available Plants: Cleaner Leather Processing." Journal of Engineering 2022 (August 31, 2022): 1–11. http://dx.doi.org/10.1155/2022/6139674.

Full text

Abstract:

Leather is made from animal hides and skins that have passed through several stages of processing, from soaking to finishing. Unhairing is a crucial processing stage in which hair is removed from the animal hide or skin through open up the hair and it facilitates subsequent operations. The conventional sodium sulfide-based unhairing process generates a high volume of effluent, which accounts for 50 to 70% of the total biochemical oxygen demand (BOD) and chemical oxygen demand (COD) load in the tanneries’ effluent. This study aimed to investigate the potential of unhairing agents prepared from

APA, Harvard, Vancouver, ISO, and other styles

13

Archana, V., J. Joseph Prince та S. Kalainathan. "Simple One-Step Leaf Extract-Assisted Preparation of α-Fe2O3 Nanoparticles, Physicochemical Properties, and Its Sunlight-Driven Photocatalytic Activity on Methylene Blue Dye Degradation". Journal of Nanomaterials 2021 (1 червня 2021): 1–25. http://dx.doi.org/10.1155/2021/8570351.

Full text

Abstract:

Hematite nanoparticles have been prepared from Moringa oleifera leaf extracts. Phytochemicals are derived from plant extracts which act as a stabilizing and capping agent as well as a surfactant. This green route protocol is attractive owing to its speed, reliability, and ecofriendly and cost-effective qualities. The synthesized iron oxide nanoparticles were subjected to three different calcination temperatures (500, 600, and 700°C). The crystallinity nature and phase purity have been confirmed by powder X-ray diffraction (PXRD). Optical properties have been studied by UV-visible (UV-vis) and

APA, Harvard, Vancouver, ISO, and other styles

14

Christian, Adams. "Bleaching Powder Manufacturing Plant Project Report 2022-2027 | Syndicated Analytics." March 23, 2022. https://doi.org/10.5281/zenodo.6379807.

Full text

Abstract:

The growing product utilization as a disinfectant in laundry detergents and surface cleaners is primarily driving the bleaching powder market. Additionally, the increasing consumer awareness towards the importance of regular and proper maintenance of complexes, office spaces, public restrooms, malls, etc., on account of the sudden outbreak of the COVID-19 pandemic across countries, is further catalyzing the market growth.

APA, Harvard, Vancouver, ISO, and other styles

15

Ayo, Afolabi, Sigwadi Rudzani, and Abdulkareem Ambali. "Reduction of Chloride Dioxide in Paper Bleaching using Peroxide Activation." International Journal of Chemical, Materials and Biomolecular Sciences 5.0, no. 5 (2012). https://doi.org/10.5281/zenodo.1333302.

Full text

Abstract:

All around the world pulp and paper industries are the biggest plant production with the environmental pollution as the biggest challenge facing the pulp manufacturing operations. The concern among these industries is to produce a high volume of papers with the high quality standard and of low cost without affecting the environment. This result obtained from this bleaching study show that the activation of peroxide was an effective method of reducing the total applied charge of chlorine dioxide which is harmful to our environment and also show that softwood and hardwood Kraft pulps responded l

APA, Harvard, Vancouver, ISO, and other styles

16

Pancholi, Nilesh, Hiren Gajera, and Darshit Shah. "Improving quality of maintenance task for milk powder manufacturing unit through TOPSIS." Journal of Quality in Maintenance Engineering, October 28, 2021. http://dx.doi.org/10.1108/jqme-04-2021-0028.

Full text

Abstract:

Purpose The purpose of this paper is to explore the possibilities of improving the quality of existing maintenance task of the atomizer of milk powder manufacturing unit of a dairy plant. Looking to the past business volume and expected growth, the milk powder manufacturing unit forms a noticeable sector of processing plant. The lack of quality in maintenance standards leads to reliability losses of about 20–25% with low productivity and profit. Such facts and challenges of keeping the system in ready-state motivate a definite maintenance plan to be modeled based on a live failure analysis to

APA, Harvard, Vancouver, ISO, and other styles

17

Khatri, Rahul, Michael Schmidt, and Rainer Gasper. "Active participation of industrial enterprises in electricity markets - a generic modeling approach." Energy Informatics 4, S3 (2021). http://dx.doi.org/10.1186/s42162-021-00173-5.

Full text

Abstract:

AbstractIndustrial enterprises represent a significant portion of electricity consumers with the potential of providing demand-side energy flexibility from their production processes and on-site energy assets. Methods are needed for the active and profitable participation of such enterprises in the electricity markets especially with variable prices, where the energy flexibility available in their manufacturing, utility and energy systems can be assessed and quantified. This paper presents a generic model library equipped with optimal control for energy flexibility purposes. The components in

APA, Harvard, Vancouver, ISO, and other styles

18

Gan, Shenghua, Shunli Xiao, Tong Liu, et al. "Recycle waste PET yarn on site by feeding waste yarn as grinded powder to improve product quality, increase energy efficiency and reduce environmental impact." Journal of Engineered Fibers and Fabrics 19 (January 2024). http://dx.doi.org/10.1177/15589250241242009.

Full text

Abstract:

A technical approach was proposed to recycle waste PET yarn on site with the aim of building green manufacturing plant with no waste accumulation. In the recycling process, the waste PET yarn with almost infinite aspect ratio was first treated with custom-designed grinder prior to recycling, which breaks the yarn into small pieces and produce powder-like final product (waste yarn/fiber powder, WYP/WFP). Then it could be mixed with PTA and EG to form slurry and fed into manufacturing unit using well-established method rather than be fed as melt by screw-extruder that is known for its high energ

APA, Harvard, Vancouver, ISO, and other styles

19

Eissel, Antonia, Lorenz Engelking, Kai Treutler, Volker Wesling, Dirk Schröpfer, and Thomas Kannengießer. "Modification of Co–Cr alloys to optimize additively welded microstructures and subsequent surface finishing." Welding in the World, July 5, 2022. http://dx.doi.org/10.1007/s40194-022-01334-0.

Full text

Abstract:

Abstract Cobalt chromium alloys are often used in turbine and plant construction. This is based on their high thermal and mechanical stress resistance as well as their high wear resistance to corrosive and abrasive loads. However, cobalt is a cost-intensive material that is difficult to machine. Moreover, increasingly complex structures and the optimisation of resource efficiency also require additive manufacturing steps for the production or repair of components in many sectors. Concerning inhomogeneity and anisotropy of the microstructure and properties as well as manufacturing-related stres

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!