Relevant bibliographies by topics / Block designs – Analysis

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Block designs – Analysis'

Author: Grafiati
Published: 4 June 2021
Last updated: 5 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Block designs – Analysis.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Block designs – Analysis"

1

Edmondson, Rodney N. "Multi-level Block Designs for Comparative Experiments." Journal of Agricultural, Biological and Environmental Statistics 25, no. 4 (2020): 500–522. http://dx.doi.org/10.1007/s13253-020-00416-0.

Full text
Abstract:
Abstract Complete replicate block designs are fully efficient for treatment effects and are the designs of choice for many agricultural field experiments. For experiments with a large number of treatments, however, they may not provide good control of variability over the whole experimental area. Nested incomplete block designs with a single level of nesting can then improve ‘within-block’ homogeneity for moderate sized experiments. For very large designs, however, a single level of nesting may not be adequate and this paper discusses multi-level nesting with hierarchies of nested blocks. Mult
APA, Harvard, Vancouver, ISO, and other styles
2

Laycock, P. J., A. K. Nigam, P. D. Puri, and V. K. Gupta. "Characterizations and Analysis of Block Designs." Biometrics 45, no. 4 (1989): 1339. http://dx.doi.org/10.2307/2531793.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dean, Angela, A. K. Nigam, P. D. Puri, and V. K. Gupta. "Characterizations and Analysis of Block Designs." Journal of the American Statistical Association 84, no. 408 (1989): 1102. http://dx.doi.org/10.2307/2290107.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Clarke, G. M., A. K. Nigam, P. D. Puri, and V. K. Gupta. "Characterizations and Analysis of Block Designs." Applied Statistics 39, no. 1 (1990): 136. http://dx.doi.org/10.2307/2347828.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Porter, Max, A. K. Nigam, P. D. Puri, and V. K. Gupta. "Characterization and Analysis of Block Designs." Statistician 38, no. 3 (1989): 212. http://dx.doi.org/10.2307/2348885.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bailey, R. A. "Block Designs: a Randomization Approach. Vol. I: Analysis and Block Designs: a Randomization Approach. Vol. II: Design." Journal of the American Statistical Association 99, no. 466 (2004): 558–60. http://dx.doi.org/10.1198/jasa.2004.s327.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mejza, Iwona, Katarzyna Ambroży-Deręgowska, Kazuhiro Ozawa, Stanisław Mejza, and Shinji Kuriki. "Constructing non-orthogonal split-split-plot designs using some resolvable block designs." Biometrical Letters 57, no. 2 (2020): 177–94. http://dx.doi.org/10.2478/bile-2020-0012.

Full text
Abstract:
Summary We consider a new method of constructing non-orthogonal (incomplete) split-split-plot designs (SSPDs) for three (A, B, C) factor experiments. The final design is generated by some resolvable incomplete block design (for the factor A) and by square lattice designs for factors B and C using a modified Kronecker product of those designs (incidence matrices). Statistical properties of the constructed designs are investigated under a randomized-derived linear model. This model is strictly connected with a four-step randomization of units (blocks, whole plots, subplots, sub-subplots inside e
APA, Harvard, Vancouver, ISO, and other styles
8

Giesbrecht, F. G. "Analysis of Data from Incomplete Block Designs." Biometrics 42, no. 2 (1986): 437. http://dx.doi.org/10.2307/2531064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Choi, Jaesung. "Projection analysis for balanced incomplete block designs." Journal of the Korean Data and Information Science Society 26, no. 2 (2015): 347–54. http://dx.doi.org/10.7465/jkdi.2015.26.2.347.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Meinrath, Günther. "Robust spectral analysis by moving block bootstrap designs." Analytica Chimica Acta 415, no. 1-2 (2000): 105–15. http://dx.doi.org/10.1016/s0003-2670(00)00850-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Block designs – Analysis"

1

Estolano, Marcial Perez. "Split plot designs." Thesis, Kansas State University, 1985. http://hdl.handle.net/2097/9835.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Youssef, A. M. "Analysis and design of block ciphers." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp02/NQ27864.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

AROLE, ALUKAYODE. "POWER PROFILING: AN INCREMENTAL POWER ANALYSIS TECHNIQUE FOR FPGA-BASED DESIGNS." University of Cincinnati / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1155577393.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Erdem, Ayan. "Performance Analyses Of Newton Method For Multi-block Structured Grids." Thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613704/index.pdf.

Full text
Abstract:
In order to make use of Newton&rsquo<br>s method for complex flow domains, an Euler multi-block Newton solver is developed. The generated Newton solver uses Analytical Jacobian derivation technique to construct the Jacobian matrices with different flux discretization schemes up to the second order face interpolations. Constructed sparse matrices are solved by parallel and series matrix solvers. In order to use structured grids for complex domains, multi-block grid construction is needed. Each block has its own Jacobian matrices and during the iterations the communication between the blocks sho
APA, Harvard, Vancouver, ISO, and other styles
5

Kensler, Jennifer Lin Karam. "Analysis of Reliability Experiments with Random Blocks and Subsampling." Diss., Virginia Tech, 2012. http://hdl.handle.net/10919/28415.

Full text
Abstract:
Reliability experiments provide important information regarding the life of a product, including how various factors may affect product life. Current analyses of reliability data usually assume a completely randomized design. However, reliability experiments frequently contain subsampling which is a restriction on randomization. A typical experiment involves applying treatments to test stands, with several items placed on each test stand. In addition, raw materials used in experiments are often produced in batches. In some cases one batch may not be large enough to provide materials for the en
APA, Harvard, Vancouver, ISO, and other styles
6

Owojaiye, Gbenga Adetokunbo. "Design and performance analysis of distributed space time coding schemes for cooperative wireless networks." Thesis, University of Hertfordshire, 2012. http://hdl.handle.net/2299/8970.

Full text
Abstract:
In this thesis, space-time block codes originally developed for multiple antenna systems are extended to cooperative multi-hop networks. The designs are applicable to any wireless network setting especially cellular, adhoc and sensor networks where space limitations preclude the use of multiple antennas. The thesis first investigates the design of distributed orthogonal and quasi-orthogonal space time block codes in cooperative networks with single and multiple antennas at the destination. Numerical and simulation results show that by employing multiple receive antennas the diversity performan
APA, Harvard, Vancouver, ISO, and other styles
7

Xing, Kun. "Modeling, Analysis, and Design of Distributed Power Electronics System Based on Building Block Concept." Diss., Virginia Tech, 1999. http://hdl.handle.net/10919/28123.

Full text
Abstract:
The basic Power Electronics Building Block (PEBB) configurations are identified and conceptual PEBB modules are constructed and tested. Using the INCA (Inductance Calculator) parasitic extraction and the Saber circuit simulation software, the microscopic relationships between the parasitics of the packaging layout and their circuit electrical effects are cross-examined. The PEBB module with advanced packaging techniques is characterized in comparison with the wire-bond module. The soft-switching techniques are evaluated for PEBB applications. The Zero-Current-Transition (ZCT) is proved better
APA, Harvard, Vancouver, ISO, and other styles
8

Rohail, Mina. "Evaluating the Efficacy of Relational Training Procedures to Increase IQ On The Block Design Subtest." OpenSIUC, 2018. https://opensiuc.lib.siu.edu/theses/2283.

Full text
Abstract:
The purpose of the current investigation is to two-fold: 1) to determine whether relational training increases block design and IQ score 2) to determine if relational training results in increased performance on block design programs. The Wechsler Preschool and Primary Scale of Intelligence (WPPSI-IV) for Children intelligence assessment was assessed to the participant prior to baseline and after training, and programs adapted from the PEAK-Relational Training System were used for relational training procedures. A multiple-baseline design across skills (relational frames) design was used in th
APA, Harvard, Vancouver, ISO, and other styles
9

Hilding, Amanda. "Evaluation and Consequences Analysis of a Manual Shifter with Modular Design." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-5202.

Full text
Abstract:
Subcontractors in the automotive industry, have a lot of pressure to bring down costs and to deliver products that are effective, optimized and qualitative. The main purpose of this study is to guide and conduct the first step in the project Standard Building Blocks with modular design, within the business area, manual shifter. The project is directly presented by Kongsberg Automotive, a well-known subcontractor of the automotive industry. The aim of the project is to develop a standard manual shifter with modular design containing standard building blocks. Five different components have been
APA, Harvard, Vancouver, ISO, and other styles
10

Sun, Ning. "Development and validation of a design method coupling block theory and three-dimensional discontinuous deformation analysis." Click to view the E-thesis via HKUTO, 2005. http://sunzi.lib.hku.hk/hkuto/record/B31789122.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Block designs – Analysis"

1

Block designs. 2nd ed. Open University, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dey, Aloke. Incomplete block designs. World Scientific, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

V, Padgett Lakshmi, ed. Block designs: Analysis, combinatorics, and applications. World Scientific, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nigam, A. K. Characterizations and analysis of block designs. Wiley, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

1945-, Kageyama Sanpei, ed. Block designs: A randomization approach. Springer, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Srivastava, M. S. Testing for block effects and analysis of regression models based on survey data. University of Toronto, Dept. of Statistics, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Furino, Steven. Frames and resolvable designs: Uses, constructions, and existence. CRC Press, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Koukouvinos, Christos. Combinatorial Designs: With Applications to Coding Theory and Cryptography. Walter de Gruyter, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dewar, Megan. Ordering Block Designs: Gray Codes, Universal Cycles and Configuration Orderings. Springer New York, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Almimi, Ashraf. Split-Plot Designs: Follow-Up Experiments, Missing Observations, and Model Adequacy Checking. LAP LAMBERT Academic Publishing, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Block designs – Analysis"

1

John, J. A. "Analysis of block designs." In Cyclic Designs. Springer US, 1987. http://dx.doi.org/10.1007/978-1-4899-3326-3_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mileva, Aleksandra, Vesna Dimitrova, Orhun Kara, and Miodrag J. Mihaljević. "Catalog and Illustrative Examples of Lightweight Cryptographic Primitives." In Security of Ubiquitous Computing Systems. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-10591-4_2.

Full text
Abstract:
AbstractThe main objective of this chapter is to offer to practitioners, researchers and all interested parties a brief categorized catalog of existing lightweight symmetric primitives with their main cryptographic features, ultimate hardware performance, and existing security analysis, so they can easily compare the ciphers or choose some of them according to their needs. Certain security evaluation issues have been addressed as well. In particular, the reason behind why modern lightweight block cipher designs have in the last decade overwhelmingly dominated stream cipher design is analyzed in terms of security against tradeoff attacks. It turns out that it is possible to design stream ciphers having much smaller internal states.
APA, Harvard, Vancouver, ISO, and other styles
3

Durner, Edward F. "The randomized complete block design." In Applied plant science experimental design and statistical analysis using the SAS® OnDemand for Academics. CABI, 2021. http://dx.doi.org/10.1079/9781789249927.0012.

Full text
Abstract:
Abstract This chapter focuses on randomized complete block design (RCBD). The RCBD can be simple, holding several levels of a single treatment, or complex, holding a complicated factorial. Field experiments may be blocked due to an observed or potential gradient in the field where the experiment will be performed. The yield of four lettuce cultivars was used as an example.
APA, Harvard, Vancouver, ISO, and other styles
4

Oliveira, Luis B., Jorge R. Fernandes, Igor M. Filanovsky, Chris J. M. Verhoeven, and Manuel M. Silva. "Transceiver Architectures and RF Blocks." In Analysis and Design of Quadrature Oscillators. Springer Netherlands, 2008. http://dx.doi.org/10.1007/978-1-4020-8516-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fornaciari, William, Salvatore Minonne, Fabio Salice, and Massimo Vincenzi. "Lambda-Block Analysis of VHDL for Design Reuse." In Virtual Components Design and Reuse. Springer US, 2001. http://dx.doi.org/10.1007/978-1-4757-3275-7_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jovanovic, Philipp, Martin Kreuzer, and Ilia Polian. "A Fault Attack on the LED Block Cipher." In Constructive Side-Channel Analysis and Secure Design. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29912-4_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Xiao, Lu, and Howard M. Heys. "Hardware Design and Analysis of Block Cipher Components." In Lecture Notes in Computer Science. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/3-540-36552-4_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ghalaty, Nahid Farhady, Bilgiday Yuce, and Patrick Schaumont. "Differential Fault Intensity Analysis on PRESENT and LED Block Ciphers." In Constructive Side-Channel Analysis and Secure Design. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-21476-4_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yi, Xun. "On design and analysis of a new block cipher." In Concurrency and Parallelism, Programming, Networking, and Security. Springer Berlin Heidelberg, 1996. http://dx.doi.org/10.1007/bfb0027794.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shao, Hui, and William F. Rosenberger. "Properties of the Random Block Design for Clinical Trials." In mODa 11 - Advances in Model-Oriented Design and Analysis. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-31266-8_26.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Block designs – Analysis"

1

Moder, Karl. "A new and easy to use method to evaluate interaction in block designs." In NUMERICAL ANALYSIS AND APPLIED MATHEMATICS ICNAAM 2012: International Conference of Numerical Analysis and Applied Mathematics. AIP, 2012. http://dx.doi.org/10.1063/1.4756157.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Arkhipova, Liubov, Anton Bogachev, and Alexey Tyukhtyaev. "Numerical Analysis and Design Optimization of a Low Pressure Cylinder Control Valve Block of a High-Power Steam Turbine." In ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-56296.

Full text
Abstract:
A problem of energy losses reduction in the steam flows through different channels and flow paths of steam turbines is one of the issues of the day in turbo machinery. In the report a comparative numerical analysis of two design options of control valve blocks and two different confuser pipes located upstream the control valves are presented. The aim of the research was minimization of energy losses in the control valve blocks and confuser pipes. The investigation consists of two parts. In the first part a numerical study of steam flow through two alternative designs of the low pressure contro
APA, Harvard, Vancouver, ISO, and other styles
3

Persky, Rodney, and Emilie Sauret. "Preliminary and Robust Design Analysis of a Solar Thermal Power Block." In ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-57172.

Full text
Abstract:
Australia is endeavouring to expand the mix of power resources, and is investing heavily in the development of renewable generation methods such as concentrated solar thermal power. In these systems, the power block and turbine need to maintain high efficiency under non-ideal conditions away from the design point. Literature shows that there is a clear relationship between the selection of fluids, the design of the operating cycle, the fluctuation in operating conditions and changes in power block performance. It is thus important for innovative power block designs to consider the performance
APA, Harvard, Vancouver, ISO, and other styles
4

Gagliardi, Serena, Xiong Li, Matteo Zoppi, Luis de Leonardo, and Rezia Molfino. "Adaptable Fixturing Heads for Swarm Fixtures: Discussion of Two Designs." In ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/esda2012-82562.

Full text
Abstract:
Driven by the trend of life-cycle design and sustainable production, an innovative project called self-reconfigurable intelligent swarm fixtures (SwarmItFIX) funded by the European Commission is being developed. The project investigates the application of robotic multi agent fixtures for the support of automotive and airplane body panels during their manufacturing and assembly processes. This paper addresses the exploration and development of the adaptable heads, which are the end-effector of the intelligent fixture. The head is able to adapt to the shape of the workpiece and freeze its shape
APA, Harvard, Vancouver, ISO, and other styles
5

Moder, Karl. "A new method for testing interaction in different kinds of block designs based on a linear model." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2014 (ICNAAM-2014). AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4913054.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Binnard, Mike, and Mark R. Cutkosky. "Building Block Design for Layered Shape Manufacturing." In ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/dfm-5725.

Full text
Abstract:
Abstract We are interested in designing complex mechatronic systems which closely integrate electronics, actuators, and sensors with mechanical structures. Rapid prototyping techniques open new design possibilities for these systems, such as the ability to fabricate pre-assembled mechanisms. This paper presents a design approach that should encourage exploration of these new possibilities and thereby facilitate robot design. In the described approach, engineers build designs using a library of three dimensional primitives and aggregations of primitives. Associated with each primitive is enough
APA, Harvard, Vancouver, ISO, and other styles
7

O’Halloran, Bryan M., Robert B. Stone, and Irem Y. Tumer. "Early Design Stage Reliability Analysis Using Function-Flow Failure Rates." In ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-48823.

Full text
Abstract:
In this paper, failure rates for function-flow pairs are presented. This data creates an opportunity for the designer to move reliability analysis earlier in the design process. The function-flow failure rates can be used to make design decisions before components are selected giving the designer increased knowledge to explore alternative options. A reliability block diagram approach has been adopted to evaluate the reliability of three designs at both the functional and component level. The results show that the bounds from the functional reliability overlap those of the component reliability
APA, Harvard, Vancouver, ISO, and other styles
8

Goteti, L., J. Choi, and J. Park. "Design Optimization of Snap-Fit Integral Parts by FEA and Statistical Analysis." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13239.

Full text
Abstract:
Snap-fit integral attachments are used widely for joining plastic parts. The proliferated use of integral attachment in the form of snap-fit features in designs is due to the ability to mould such parts of great complexity at little cost. The exceptional diversity of part geometry and integral snap-fit features has made it seem that design possibilities may be unlimited. Thus, attempts at optimization might be intractable. A design of experiments (DOE) approach coupled with three-dimensional, geometrical non-linear finite element analysis (FEA) was used to calculate the insertion and retention
APA, Harvard, Vancouver, ISO, and other styles
9

Larsson, Linda, Tomas Gro¨nstedt, and Konstantinos G. Kyprianidis. "Conceptual Design and Mission Analysis for a Geared Turbofan and an Open Rotor Configuration." In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-46451.

Full text
Abstract:
In this multidisciplinary study a geared open rotor configuration is assessed and compared to an ultra high bypass ratio geared turbofan engine. Both designs assume a 2020 entry into service level of technology. The specific thrust level for minimizing block fuel and the resulting engine emissions for a given mission is sought. The tool used contains models that effectively capture: engine performance, mechanical and aerodynamic design, engine weight, emissions, aircraft design and performance as well as direct operating costs. The choice of specific thrust is a complex optimization problem an
APA, Harvard, Vancouver, ISO, and other styles
10

Kim, Y. S., J. J. Lee, K. S. Cha, T. S. Kim, J. L. Sohn, and Y. J. Joo. "Analysis of Gas Turbine Performance in IGCC Plants Considering Compressor Operating Condition and Turbine Metal Temperature." In ASME Turbo Expo 2009: Power for Land, Sea, and Air. ASMEDC, 2009. http://dx.doi.org/10.1115/gt2009-59860.

Full text
Abstract:
An IGCC (integrated gasification combined cycle) plant couples a power block to a gasification block. The method of integrating a gas turbine with a gasification process is the major design option. Matching between the gas turbine and the air separation unit is especially important. This study analyzes the influences of IGCC design options on the operability and performance of the gas turbine. Another research focus is given to the estimation of the change of turbine metal temperature in the IGCC operating environment. For this purpose, a full off-design analysis of the gas turbine is used wit
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Block designs – Analysis"

1

DeAnna, Dixon, and Hodo Wayne. Finite element analysis of quoin block deterioration and load transfer mechanisms in miter gates : pintle and pintle connections. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/40842.

Full text
Abstract:
The U.S. Army Corps of Engineers (USACE) currently operates and maintains approximately 193 commercially active lock sites with 239 locks and dams spanning nearly 12,000 miles. These networks of water channels are used to transport 600 million tons of domestic cargo, generating $405 billion in revenue annually. Nearly 60% of these structures in operation are over 50 years old and have reached design life. A failure of the miter gates could result in a major negative impact on the economy and on the ability to maintain flood control. Administrators need recommendations to better prioritize main
APA, Harvard, Vancouver, ISO, and other styles
2

Francesco Venneri, Chang-Keun Jo, Jae-Man Noh, et al. High Temperature Reactor (HTR) Deep Burn Core and Fuel Analysis: Design Selection for the Prismatic Block Reactor. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/991901.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fredrick, W. Combustion processes in black liquor recovery: Analysis and interpretation of combustion rate data and an engineering design model. Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/6792173.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Michael A. Pope. High Temperature Reactor (HTR) Deep Burn Core and Fuel Analysis: Design Selection for the Prismatic Block Reactor With Results from FY-2011 Activities. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1042392.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Amzeri, Achmad, B. S. DARYONO, and M. SYAFII. GENOTYPE BY ENVIRONMENT AND STABILITY ANALYSES OF DRYLAND MAIZE HYBRIDS. SABRAO Journal of Breeding and Genetics, 2020. http://dx.doi.org/10.21107/amzeri.2020.2.

Full text
Abstract:
The phenotypic analysis of new candidate varieties at multiple locations could provide information on the stability of their genotypes. We evaluated the stability of 11 maize hybrid candidates in five districts in East Java Province, Indonesia. Maize hybrids with high yield potential and early maturity traits derived from a diallel cross were planted in a randomized complete block design with two checks (Srikandi Kuning and BISI-2) as a single factor with four replicates. The observed traits were grain yield per hectare and harvest age. The effects of environment, genotype, and genotype × envi
APA, Harvard, Vancouver, ISO, and other styles
6

Amzeri, Achmad, Kaswan Badami, and Gita Pawana. Inheritance of resistance to downy mildew (Peronosclerospora maydis) in crossing of Madura Maize Plant (Zea mays L.). Innovative Scientific Information & Services Network, 2019. http://dx.doi.org/10.21107/amzeri.2019.1.

Full text
Abstract:
Hybridization of Back cross is one method to get varieties that are resistant to downy mildew. The purpose of this study was to obtain information on inheritance characteristics of downy mildew resistance. This research was conducted at the experiment center of Agro-Technology Study Program of Agriculture Faculty, University of Trunojoyo Madura. Research of Assessment of resistance to Downy Mildew used a randomized block design with 18 treatments (P1, P2, F1, F2, BC1P1 and BC1P2 in three sets of crosses, namely LGL x Mdr-3, T12 x Mdr-1 and E02 x Mdr-2) and three replications so there were 54 e
APA, Harvard, Vancouver, ISO, and other styles
7

Badami, Kaswan, Budi Setiadi Daryono, Achmad Amzeri, and Syaiful Khoiri. COMBINING ABILITY AND HETEROTIC STUDIES ON HYBRID MELON (Cucumis melo L.) POPULATIONS FOR FRUIT YIELD AND QUALITY TRAITS. SABRAO Journal of Breeding and Genetics, 2020. http://dx.doi.org/10.21107/amzeri.2020.3.

Full text
Abstract:
In different crop plants, combining ability and heterosis are used as important diagnostic tools for assessing the performance of parental genotypes and their hybrids. This research aimed to evaluate heterotic and combining ability effects in the diallel crosses of melon (Cucumis melo L.) for yield- and quality-related traits. Seven melon (C. melo L.) genotypes were grown and crossed in a complete diallel fashion to produce F1 hybrids. During the 2019 crop season, 49 melon genotypes (7 parents + 42 F1 hybrids) were grown in a randomized complete block design with three replications. Observatio
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography