Relevant bibliographies by topics / Bloky / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Bloky.

Dissertations / Theses on the topic 'Bloky'

Author: Grafiati
Published: 4 June 2021
Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Bloky.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Salášek, Jan. "Analogové funkční bloky fraktálního řádu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-241141.

Full text
Abstract:
Thesis describes the design of the blocks of fractional-order filters approximation using a filter of higher order integer. Active filters of third-order are use to create filter of 1+alfa -order, where alfa is between zero to one. One of the filters is practically implemented and measured.
APA, Harvard, Vancouver, ISO, and other styles
2

Rajman, Jakub. "Systém souborů s velkými bloky." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2010. http://www.nusl.cz/ntk/nusl-237226.

Full text
Abstract:
Master's thesis treats of implementation of big block file system for FreeBSD operating system. The introduction of this document is dedicated to theoretically analysis, which is oriented on history, sense and usage of file systems. Next chapter describes the architecture of UFS/FFS file system. Implementation part starts with introducing design of new file system, which was isnpired by MSDOSFS file system. Last part of this thesis presents implementation of file system with great emphasis on problems, which can happen during programming.
APA, Harvard, Vancouver, ISO, and other styles
3

Horák, Ondřej. "Fázovací obvody s moderními funkčními bloky." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218030.

Full text
Abstract:
The present thesis is focused on all pass filters. The principle of all pass filters, their properties, the design of nth degree of these circuits will be analysed in succession and then some of functional blocks, by which these structures can be made, will be described. After that, the allpass filters will be designed and simulated in program OrCAD PSpice. First of all, the analysis will be performed with ideal components, then with real components. After that, the sensitivity and tolerance analysis will be made and the influence of parasite effects on circuit parameters will be examined. Once the experiments are finished, the design of Printed Circuit Board's (PCB) will be realized. Circuit showing the best parameters will be chosen for the design.
APA, Harvard, Vancouver, ISO, and other styles
4

Bořecký, Tomáš. "ARC oscilátor s bloky s řiditelným parametrem." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217807.

Full text
Abstract:
Within the master’s thesis there is comparison of different structures of ARC oscillators with respect to their harmonic distortion. Individual blocks of oscillator are analyzed. Attention is paid to choosing and design of suitable ARC filter structure and possibilities of its tuning. Also possibilities of stabilization of amplitude are analyzed. Different types of controlled amplifiers and circuits for controlling of their amplification are discussed. Next captures are focused to designing and simulation of the ARC oscillator. The oscillator can be tuned in the frequency range from 100 Hz to 20 kHz with harmonic distortion smaller than 1%. At the end of the thesis, practical realization of the proposed circuit is described. Also results of the measurement of parameters of the oscillator are given.
APA, Harvard, Vancouver, ISO, and other styles
5

Brich, Tomáš. "Digitálně řízené analogové funkční bloky a systémy." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-233440.

Full text
Abstract:
Goal of this doctoral thesis is to focus to understand of behavior of working of basic electronics circuits and to appoint which parameters of these circuits is possible to control using external digital system. Further the examples of some digitally controlled analog circuits are present and the analysis of these circuits is achieved. Some of these blocks are realized and the results of that’s measuring is presented.
APA, Harvard, Vancouver, ISO, and other styles
6

Kledrowetz, Vilém. "Vliv rozlišení MDAC na bloky řetězového převodníku AD." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217879.

Full text
Abstract:
This work deals with the influence of MDAC (multiplying DAC) resolution on basic blocks of pipelined AD converter. The MDAC was designed with 1,5 and 2,5 bits resolution structure using switched capacitor technique (SC) utilizing CMOS 0,7 m technology. Basic stages of this pipelined ADC are analyzed and compared.
APA, Harvard, Vancouver, ISO, and other styles
7

Sharoun, Assaid Othman. "Digitální programovatelné funkční bloky pracující v kódu zbytkových tříd." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-233545.

Full text
Abstract:
V systému s kódy zbytkových tříd je základem skupina navzájem nezávislých bází. Číslo ve formátu integer je reprezentováno kratšími čísly integer, které získáme jako zbytky všech bází, a aritmetické operace probíhají samostatně na každé bázi. Při aritmetických operacích nedochází k přenosu do vyšších řádů při sčítání, odečítání a násobení, které obvykle potřebují více strojového času. Srovnávání, dělení a operace se zlomky jsou komplikované a chybí efektivní algoritmy. Kódy zbytkových tříd se proto nepoužívají k numerickým výpočtům, ale jsou velmi užitečné pro digitální zpracování signálu. Disertační práce se týká návrhu, simulace a mikropočítačové implementace funkčních bloků pro digitální zpracování signálu. Funkční bloky, které byly studovány jsou nově navržené konvertory z binarní do reziduální reprezentace a naopak, reziduální sčítačka a násobička. Nově byly také navržené obslužné algoritmy.
APA, Harvard, Vancouver, ISO, and other styles
8

Herencsár, Norbert. "Nové aktivní funkční bloky a jejich aplikace v kmitočtových filtrech a kvadraturních oscilátorech." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-233510.

Full text
Abstract:
Kmitočtové filtry a sinusoidní oscilátory jsou lineární elektronické obvody, které jsou používány v široké oblasti elektroniky a jsou základními stavebními bloky v analogovém zpracování signálu. V poslední dekádě pro tento účel bylo prezentováno velké množství stavebních funkčních bloků. V letech 2000 a 2006 na Ústavu telekomunikací, VUT v Brně byly definovány univerzální proudový konvejor (UCC) a univerzální napět'ový konvejor (UVC) a vyrobeny ve spolupráci s firmou AMI Semiconductor Czech, Ltd. Ovšem, stále existuje požadavek na vývoj nových aktivních prvků, které nabízejí nové výhody. Hlavní přínos práce proto spočívá v definici dalších původních aktivních stavebních bloků jako jsou differential-input buffered and transconductance amplifier (DBTA), current follower transconductance amplifier (CFTA), z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), generalized current follower differential input transconductance amplifier (GCFDITA), voltage gain-controlled modified current-feedback operational amplifier (VGC-MCFOA), a minus-type current-controlled third-generation voltage conveyor (CC-VCIII-). Pomocí navržených aktivních stavebních bloků byly prezentovány původní zapojení fázovacích článků prvního řádu, univerzální filtry druhého řádu, ekvivalenty obvodu typu KHN, inverzní filtry, aktivní simulátory uzemněného induktoru a kvadraturní sinusoidní oscilátory pracující v proudovém, napět'ovém a smíšeném módu. Chování navržených obvodů byla ověřena simulací v prostředí SPICE a ve vybraných případech experimentálním měřením.
APA, Harvard, Vancouver, ISO, and other styles
9

Bartel, Jindřich. "Přesuvna." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254371.

Full text
Abstract:
Diploma thesis deals with the design of transfer table for steel sheets with stroke using screw jacks. The thesis contains a technical balance sheet construction of electromechanical and hydraulic transfer table. The main work is a description of the conceptual solutions and description of selected components. The thesis includes calculations wheel drive and stroke, design and control wheel blocks and traversing chain. End of thesis includes strength finite element analysis with the determination of the maximum stress and strain. The work accompanying drawings.
APA, Harvard, Vancouver, ISO, and other styles
10

Drozda, Tomáš. "Forenzní analýza sítě Bitcoin." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2016. http://www.nusl.cz/ntk/nusl-255465.

Full text
Abstract:
This thesis is focused on Bitcoin forensic analysis. Main goal of this thesis was to design and implement system tool for forensic analysis. Theoretical part of this thesis is dedicated to Bitcoin network. Requirements and existing tools are described in following chapters. Rest of the thesis is concerned about implementation of such a tool itself. Implemented system is presented as web application, which allows user to search through blockchain, vizualize financials, display profile pages of Bitcoin users and their Bitcoin wallets.
APA, Harvard, Vancouver, ISO, and other styles
11

Nezvalová, Kristýna. "Monitoring pohybů skalních bloků." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226214.

Full text
Abstract:
The thesis deals with monitoring of rock blocks movements near sinking stream Bílá voda situated near the village Holštejn in Moravian Karst. The thesis follows up results, which were gained in years 2004-2011. The aim of thesis is survey of the 16th stage in summer 2012 and 17th stage in autumn 2012, following processing of surveying data and evaluation of space movements. Achieved results are compared mutually and they are analysed towards results of previous periods. The final results are documented numerically and graphicallyl.
APA, Harvard, Vancouver, ISO, and other styles
12

Pončíková, Monika. "Určení pohybu skalních bloků." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-227112.

Full text
Abstract:
The diploma thesis deals with monitoring of movements of rock blocks and boulders near of the Bíla voda stream sink Nová Rasovna. The aim of thesis is to measure of the 18th stage and 19th stage in year 2013. The thesis follows on the results obtained in years 2004-2012. Achieved results are mutually compared and analysed towards the results of previous periods. The final results are shown numerically and graphically.
APA, Harvard, Vancouver, ISO, and other styles
13

Smolinka, Martin. "Stanovení pohybů skalních bloků." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-390204.

Full text
Abstract:
The subject of the diploma thesis is monitoring of rocks blocks movements near sinking stream Bílá voda situated near the village Holštejn in Moravian Karst. The aim of thesis is to measure of the 21th stage and 22th stage in year 2017. The thesis follows on the results obtained in years 2004-2015. Achieved results are mutually compared and analysed towards the results of previous stages. The final results are shown numerically and graphically
APA, Harvard, Vancouver, ISO, and other styles
14

Chevtaikin, Sergei. "Strukturální analýza bloku motoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399295.

Full text
Abstract:
This master thesis focuses on structural analysis of combustion engine block. The main goal of this work was the design and compare individual solutions of long and short engine’s blocks. First part of work shows existing engine block designs and solutions. Based on the research part, the CAD design of the engine blocks and their discretization was performed by pre-processor programs. Structural analysis and their final comparison were provided by FEM and MBS programs.
APA, Harvard, Vancouver, ISO, and other styles
15

Daňová, Veronika. "KYJOV – PŘESTAVBA MĚSTSKÉHO BLOKU." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2020. http://www.nusl.cz/ntk/nusl-417962.

Full text
Abstract:
The topic of my diploma thesis is an urbanistic and architectural study of the reconstruction of a city block near Masaryk Square in Kyjov. The block is located between the main square and the bus station. Currently, some parts of the block are used not enough or not used at all. The urbanistic study deals with the completion of the block and the creation of new public spaces with a newly designed traffic road. The architectural study deals with the study of an apartment building with parking next to the Panorama cinema in the western part of the city block. The aim of the proposal is to complete the gap, rebuild and return the housing function to the city center.
APA, Harvard, Vancouver, ISO, and other styles
16

Čermáková, Kateřina. "Rekonstrukce fary v Brankovicích." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226410.

Full text
Abstract:
This is a reconstruction of the parish in Brankovice. The building has two floors, is partly a basement, attic, unused, false hip roof. The building was built in the Baroque - Classical style around 1773. The facade is horizontally divided by plinth, shams around windows, and by a cordon cornice lisenas vertically between windows. The front is accentuated by protruding buttress. The building consists of mid-section and two side wings, the layout is strictly symmetrical. The central axis of the main entrance to the building, which is linked to the entrance hall. On the second floor, there is a staircase hall in the central part of the building, connected to all rooms, which are further connected to each other. The rooms on the first floor will be used as an apartment for the pastor. The part of solution is reconstruction and extensions of bathrooms and garage. Bearing system of solved object consists of burnt bricks. The extensions is designed as ceramic brick blocks Therm masonry.
APA, Harvard, Vancouver, ISO, and other styles
17

Hanuska, Ján. "Odjehlování vnitřních prostor ventilových bloků." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231324.

Full text
Abstract:
This thesis is solving issues concerning deburring of hydraulic valve blocks with industrial robot. Thesis is focused on deburring of inside space of hydraulic valve blocks, although deburring of outer edges is marginally mentioned due to determining of approximate deburring time of all edges on the valve block. Search of deburring methods and tools suitable for deburring of inside and outside edges is made on the basis of valve blocks´ analysis. Paths of tools chosen for deburring of valve block B1 are programmed in CAM program. CAD program ProEngineer is used to create simplified model of robotic workplace and its layout. According to customer´s requirements, deburring method, which allows creating universal robotic workplace for deburring of hydraulic valve blocks, was chosen. Approximate deburring time of all edges on B1 block was set on the basis of tools´ paths and these were checked in the simplified model of robotic workplace in PowerMill Robot Interface. Deburring procedure, estimating of approximate deburring time of B1 block and layout of robotic workplace are main results of this thesis.
APA, Harvard, Vancouver, ISO, and other styles
18

Foltis, Aleš. "Řešení montážních deformací bloku motoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230122.

Full text
Abstract:
Size and distribution of mount deformation are the main topics discussed in this thesis, using different static loading. The thesis’ primary focus is to show how deformation and stress of the engine block with cylinder liner are affected in the assembly order of the cylinder head. The calculation and evaluation of the solution are calculated by using method finite element, software Ansys. In addition other methods are discussed which can also measure the deformation of the engine block.
APA, Harvard, Vancouver, ISO, and other styles
19

Kuzník, Bořek. "Konstrukce bloku motoru leteckého motoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230795.

Full text
Abstract:
This thesis describes the problems of the engine block and crankcase. There is solution of structural design and contains the engineering design of invert six-cylinder engine block with water cooling. Thesis deals with connected equipment and drives. Engineering design is verified by finite elements analysis for the determination of strenght and durability. The ending of thesis analyzes the production methods of designed engine block.
APA, Harvard, Vancouver, ISO, and other styles
20

Kudlík, Michael. "Blok vznětového motoru 2.0L." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-319930.

Full text
Abstract:
This diploma thesis describes the problems of the engine block and crankcase. As a one of the most imprortant and first part of this task is creating a 3D simulation model of a engine block and calculating load forces of engine block. The simulation and evaluation of the solution are calculated by using method finite element, software Ansys. The conclusion and ending point of the od the diploma thesis construction desing of stiffness increase.
APA, Harvard, Vancouver, ISO, and other styles
21

Veselý, Jiří. "Elektronicky přeladitelný harmonický oscilátor." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218599.

Full text
Abstract:
This masters project describes properties and primary parameters of active function blocks (OPA, VCA, OTA, CFA, CC) usable in construction of harmonic oscillators. Basic principles of harmonic generators, especially feedback oscillators, are introduced. In next section are presented five particular schematics of harmonic tuned oscillators. For this oscillators are indicated basic formulas, essential qualities performed by simulations and results of sensitivity and tolerance analysis. In the last part of diploma thesis there are selected three circuits which are made and their features are measured.
APA, Harvard, Vancouver, ISO, and other styles
22

Szabó, Zoltán. "Příspěvek k optimální syntéze filtračních obvodů." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-233563.

Full text
Abstract:
The presented dissertation thesis is focused on the optimization of filtering circuit synthesis. In the five main sections of this work, the author analyzes partial problems related to several areas within the synthesis of modern filtering circuits. The first chapter constitutes an examination of elementary aspects which characterize present-day integrated circuits in voltage feedback operational amplifiers, and this main content is further complemented with a view on possible application of these circuits for the designing of filtering circuits as proposed within subsequent parts of the thesis. In this context, the second chapter contains a description of the design and optimization of digitally controlled universal filters tunable by means of digital potentiometers originally produced for audio technology. These digitally controlled circuits are increasingly utilized as analog preprocessing blocks in digital signal processing systems. The most extensive portion of the dissertation is dedicated to a complex analysis of individual configurations of economical, purposely lossy active function blocks and modern voltage operational amplifiers. This part of the thesis aims at providing a detailed insight into the characteristics of individual configurations of examined circuits; furthermore, in this respect, the author proposes a comparison of various application possibilities relating to these circuits and their wider use in the field of active frequency filters optimization. The described section of the work also includes a definition and examples of application of the designed and realized program, which facilitates significant simplification of purposely lossy ARC filters. In the penultimate part of the dissertation thesis, the design, development, and verification of a suitable synthesis procedure are presented together with the optimization of data and (in particular) power models of EMC filters. Based on the verification of characteristics inherent with the designed models of EMC filters, the suggested measuring procedure related to these filters is described, including the design of a station for measuring elementary parameters of line anti-interference devices up to very high frequencies. In the last section of the thesis, the author discusses the procedure of air ions concentration measurement through an aspiration condenser and analyzes the systematic and random errors as well as the optimization of filtration characteristics of the applied measurement method. This part includes the description of the design and characteristics of the realized fully automated measurement system with an aspiration condenser.
APA, Harvard, Vancouver, ISO, and other styles
23

Prokop, Roman. "Modulární přístup k návrhu moderních analogových prvků v technologii CMOS." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-233461.

Full text
Abstract:
The presented dissertation thesis deals with modular design of analog circuits in CMOS technology. The goal of the work is to design a set of modular microelectronic building blocks and realize the selected modern active circuits, working primarily in current mode. Nevertheless, the modular approach can be used for design of generally known classical elements, e.g. opamps, as well. As a part of the work, the development of the totally new highly versatile active circuit CCTA has been done, including detailed analysis of utilization and introduction of the most interesting applications. This circuit CCTA, together with relative, already theoretically treated circuit CDTA, has been realized here for the first time, in two different topologies. Final circuits were tested. On the basis of measurement results the library of behavioral models for PSpice was created, including exemplary simulations of the selected applications. Based on the obtained knowledge the brief comparison of voltage mode circuits and current mode circuits was done.
APA, Harvard, Vancouver, ISO, and other styles
24

Vilkaitis, Aristidas. "Optimalaus bloko ilgio parinkimas autonormuojančioms sumoms." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2014. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2009~D_20140701_175939-78858.

Full text
Abstract:
Šis darbas grindžiamas M. Juodžio ir A. Račkausko straipsniu apie autonormuotas sumas priklausomiems atsitiktiniams dydžiams ir nagrinėjama įrodyta teorema apie autonormuotų sumų konvergavimą naudojant blokus. Pradžioje ištiriamas konvergavimo greitis kaip funkcija nuo bendro narių skaičiaus ir bloko ilgio, vėliau ieškomas šios funkcijos minimumas ir gaunamas optimalaus bloko ilgio ir konvergavimo greičio įvertis.
This work is based on an article by M. Juodis and A. Račkauskas concerning self-normalized sums. The object of this thesis is to further analyse a proven theorem about the convergance of self-normalized sums for dependant random variables using blocks. Firstly, we measure the rate of convergance as a function dependant on the total number of elements and the lenght of the blocks. Later, we find the extreme values of this function and give an estimate of the optimal block length for best convergance results. Finaly, we measure the rate of convergance using the method described in the article.
APA, Harvard, Vancouver, ISO, and other styles
25

Smirnova, Olga Aleksandrovna. "Opyt vdokhnoveniia v poezii Aleksandra Bloka." Thesis, Keele University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.308598.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Zetík, Rostislav. "Modelování netradičních funkčních bloků v Pspice." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217785.

Full text
Abstract:
This master´s thesis on theme Modeling of the unconventional functional blocks in Pspice deals with the design procedures of electronic elements models and should to help with their create. At the beginning the thesis theoretically describes how the models are created and what possibilities for modeling the program Pspice offers. There are drawn near the individual levels of model and their properties. The second main part of thesis shows practically step by step the design procedures of models of the operational amplifier, current and voltage conveyors, OTA, CDTA, immittance inverter and converter and logarithmic amplifier. There are created the models up to 4.th level, the ideal, resistive, frequency dependent and nonlinear. The basic transmission properties, input and output impedance are modeled this way. The created models with sufficient accuracy correspond to the parameters of the commercial elements. This thesis such shows the possibilities of the program for finding of values for model components like stepping or Optimizer tool.
APA, Harvard, Vancouver, ISO, and other styles
27

Černý, Michal. "Analýza sekundárního okruhu bloku VVER 440." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378709.

Full text
Abstract:
The main aim of this thesis is the model design and control the secondary circuit block VVER 440. The search part of my work is a description of the secondary circuit. In the first part of the calculation is performed for the rated secondary circuit. The second calculation part focuses on the calculation circuit of the secondary for the reduced, influenced by shutting down one steam generator.
APA, Harvard, Vancouver, ISO, and other styles
28

Czapek, Jakub. "Stavba-Prostor-Město "Dostavba městského bloku"." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2019. http://www.nusl.cz/ntk/nusl-400655.

Full text
Abstract:
The diploma thesis deals with the creation of a design of a new apartmen building in the city of Brno on the plot expected to be completed by the city block. Typologically it deals with the current design possibilities of gallery apartment buildings / porch houses, implementation of space-demanding grocery stores and commercial areas into urban structures. Architecturally explores the possibilities of designing new constructions with citation of architectural language a tectonics of past styles.
APA, Harvard, Vancouver, ISO, and other styles
29

Darda, Lukáš. "Stavba-Prostor-Město "Dostavba městského bloku"." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2019. http://www.nusl.cz/ntk/nusl-400658.

Full text
Abstract:
The thesis deals with the examination of the possibility of designing a high-rise building on the corner of Milady Horákové and Černopolní streets, as a reaction to the important composition axis of the city and emphasizing the distinctive compositional element in the urban landscape, its panorama. The object takes into account the importance of the space and the complexity of the cramped parcel in relation to the adjacent building. It functionally combines commercial, residential and administrative functions with respect to the nature of the place.
APA, Harvard, Vancouver, ISO, and other styles
30

Langnerová, Karolina. "Stavba-Prostor-Město "Dostavba městského bloku"." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2019. http://www.nusl.cz/ntk/nusl-400662.

Full text
Abstract:
This work seeks to verify the possible construction of a kindergarten in very confined conditions in the courtyard so that children can take dignified first steps in educational facilities and at the same time to economically use the land in the city center.
APA, Harvard, Vancouver, ISO, and other styles
31

Malíková, Marieta. "Stavba-Prostor-Město "Dostavba městského bloku"." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2019. http://www.nusl.cz/ntk/nusl-400664.

Full text
Abstract:
In recent decades, the city of Brno has been facing increasing demands on living and working spaces. Rather than expanding the city's boundaries, however, it is necessary to embark on the development of already defined blocks or vacant-lots. At the same time, in a time of rapidly changing demands of the population, it is appropriate to consider the possibilities of variability of the buildings themselves in order to respond flexibly to the situation. The diploma thesis deals with the topic of social housing and the possibilities of its variability - as a tool for regulating rental prices in Brno. The result is a modular gallery building on Francouzská street. The parterre is dedicated to the catering facilities and community clubhouse linked to both the street and the courtyard.
APA, Harvard, Vancouver, ISO, and other styles
32

Vik, Ondřej. "Stavba-Prostor-Město "Dostavba městského bloku"." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2019. http://www.nusl.cz/ntk/nusl-400669.

Full text
Abstract:
This project deals with the completion of a city block in the Brno city center and proposes an apartment building design for an in-fill on Francouzská street. The principles of the design are founded on the pillars of sustainable development. The proposed building will offer spacious rental apartments for families in a close proximity to the historical city center.
APA, Harvard, Vancouver, ISO, and other styles
33

Zlámal, Filip. "Stavba-Prostor-Město "Dostavba městského bloku"." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2019. http://www.nusl.cz/ntk/nusl-400672.

Full text
Abstract:
This thesis deals with the completion and density of urban development. The area is located at an exposed place on the crossroad of Milada Horáková street and Francouzská streets in Brno. The disposal is deep and corner in a slightly sloping topography, surrounded by a busy city boulevard and urban block structure. The proposal is based on a pre-diploma thesis dealing with the analysis of close surroundings, visions for the 21st century city and the completion strategy. The starting point was a multifunctional building, which includes functions of housing, work and services. The main theme of the propsal is the interconnection of the inner and outer space in a compact townhouse.
APA, Harvard, Vancouver, ISO, and other styles
34

Burešová, Karolína. "Stavba - prostor - město Dostavba městského bloku." Master's thesis, Vysoké učení technické v Brně. Fakulta architektury, 2019. http://www.nusl.cz/ntk/nusl-400675.

Full text
Abstract:
Based on a regulatory plan, I chose a plot of the city corner for my diploma thesis, which is an introduction to Francouzská Street. At present, this plot is used only as a parking lot, but it is located in an interesting busy place in the mouth of the five roads. Based on the new regulatory plan, the plot is located on the dominant site of the city piazzetta with a function full of people and commercial partners. My goal is to create a significant city corner, which will be a local dominant of the nearby area. The filling of the house is commercial, administrative, and residential. The proposal will allow fluctuations in the ratio between these functions due to the variability of market demand. With the statue of a staircase, I want to create a communication space for the residents of the house, where PROMENADE will be created and at the same time will serve as an interesting backdrop for the parterre.
APA, Harvard, Vancouver, ISO, and other styles
35

Měsíček, Libor. "Vytvoření učebního bloku řízení portfola projektů." Master's thesis, Vysoká škola ekonomická v Praze, 2009. http://www.nusl.cz/ntk/nusl-11572.

Full text
Abstract:
This thesis is focused on IT Project Portfolio Management and the creation of tools for teaching it. The objectives are first to summarize the evolution of IT Project Portfolio Management, then to extend the current process of project selection with other elements and points of view, and also to create a software tool for teaching IT Project Portfolio Management. The thesis deals with the emergence and subsequent development of IT Project Portfolio Management and its benefits, problems, and concepts, which are necessary for deeper understanding of the issue. Furthermore, the thesis describes the cycle of IT Project Portfolio Management and highlights the important moments and trends. In addition, it focuses on the processes used in the context of portfolio management and its impact on the company and its employees. It also lists some options how to limit its and how to improve the quality of project plans. The focus of the thesis is also on the process of criteria selection and ways of obtaining appropriate weights of criteria and on other methods of selecting projects. The last chapter contains a manual how to work with the attached MS Excel file. The file provides a tool for the assessment of projects.
APA, Harvard, Vancouver, ISO, and other styles
36

Glaudes, Pierre. "L'Oeuvre romanesque de Léon Bloy." Lille 3 : ANRT, 1987. http://catalogue.bnf.fr/ark:/12148/cb375979247.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Glaudes, Pierre. "L'oeuvre romanesque de Léon Bloy /." Toulouse : PELH, littérature et herméneutique, 2006. http://catalogue.bnf.fr/ark:/12148/cb41031024g.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Císařovská, Anna. "Disponovanost herce a tvůrčí blok." Master's thesis, Akademie múzických umění v Praze.Divadelní fakulta. Knihovna, 2013. http://www.nusl.cz/ntk/nusl-177684.

Full text
Abstract:
This diploma work focuses on the impact of actors? self-awareness and self-consciousness on their creativity and performance. It investigates how a weak self-confidence can block an actor?s natural creativity and given talents for acting. It analyses what acting aptitudes really are. It also looks into creativity lapses and asks how to stop them.
APA, Harvard, Vancouver, ISO, and other styles
39

Abrahám, Jan. "Parní turbína pro biomasový blok." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417526.

Full text
Abstract:
Diploma thesis deals with the design of a condensing steam turbine with one controlled steam extraction. Its working range is 0 to 10 t/h. The first part contains the design of the heat balance scheme. The turbine has two unregulated steam extractions for low-pressure feedwater heater and outlet steam is cooled by water condenser. The main part is the design of the turbine flow channel with one regulative stage using impulse blading and 26 regular stages using reaction blading. The turbine rotating speed is 8500 rpm, which is strength suitable even in critical points. The following chapters are describing the design of the compensation piston and bearings. The consumption characteristic of the steam turbine is shown in the last chapter. Drawing of the turbine section is attached to this thesis. Final turbine power is 9259,7 kW and thermodynamic efficiency 85,5 %.
APA, Harvard, Vancouver, ISO, and other styles
40

Doseděl, Jakub. "Parní turbína pro biomasový blok." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417844.

Full text
Abstract:
The aim of this diploma thesis is a design of a condensing steam turbine based on technical specification of inlet steam - maximal mass flow 120 t/h, temperature 440 °C; on temperature in deaerator 125 °C; on mass flow 0 – 60 t/h and pressure 3,0 bar(a) of regulated steam extraction and on ambient temperature in the vicinity 25 °C. The result contains steam turbine with reaction blading, work output 28,76 MWe and efficiency 82 %.
APA, Harvard, Vancouver, ISO, and other styles
41

Lukoševičius, Kęstutis. "Grafinės duomenų bazės blokų atributų valdymo sistema." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2005. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2005~D_20050112_174437-60045.

Full text
Abstract:
In the recent two years the analysis of principal and connective circuitry drawings proved that the principal and connective circuitries of very complicated projects are kept in a single file. Therefore, traditional specialized automated design system are not able to build and draw hybrid circuitries with the fragments of electromechanically networks together with the display of sensors and processors. The number of elements in such project files may reach from a few hundred until a few thousand. As this number is so high, the standard AutoCAD means do not quite fulfill the designers’ needs of working with blocks and their attributes. In this way they choose automated means that do not limit their abilities in preparing technical, assembly and tuning documentation, necessary for the completion of the projects. Therefore, based on the master’s paper, in order to fulfill the aforementioned needs, the building of the graphical data base block attribute system management system has been completed. The objective of the paper is the attributes and management of the graphical data base blocks. The purpose of the paper is to create a system of the graphical database attribute management and the means of using it. The purpose is defined by the following tasks: graphic data bases are analyzed; also the graphical data base blocks, their attributes, constituent parts and their management; the means of using the system in the medium of Auto CAD; based on the master’s paper the system of... [to full text]
APA, Harvard, Vancouver, ISO, and other styles
42

Shin, Chang Soo. "Nonlinear elastic wave inversion by blocky parameterization /." Access abstract and link to full text, 1988. http://0-wwwlib.umi.com.library.utulsa.edu/dissertations/fullcit/8810420.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

Votýpka, František. "Aplikace moderních funkčních bloků v harmonických oscilátorech." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218398.

Full text
Abstract:
This work deals with using modern active functional blocks in electronic circuits. These blocks have better features than classical operational amplifiers and are characterized especially by working in current mode. Therefore these blocks can be used in higher frequencies. Using those blocks it is possible to design e.g. electronically variable-frequency filters of types low-pass filter, high-pass filter, band-pass filter, etc. Then it is also possible to easily realize electronically variable-frequency oscillators. This work is focused on some of these blocks, their basic characteristics and principles. Also three oscillators with current conveyors of second generation are designed. Its made simulation, sensitivity and tolerance analysis and magnitude stabilization. Everything is performed in OrCAD PSpice program. These made oscillators are electronic tunable in the band frequency ones of MHz.
APA, Harvard, Vancouver, ISO, and other styles
44

Hübková, Ivana. "Uplatnění diagnostických metod na zařízeních paroplynového bloku." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-219905.

Full text
Abstract:
This master´s thesis deals with problem of reliability of technical device in general a so there is explained bathtub curve, defects and malfunctions of devices and then there is a brief outline of reliability system. This thesis further briefly describes technical diagnostic and then there is performed the vibrodiagnostic measurements of selected pumps and ventilators in in heating plant Červený mlýn in Brno. Evaluation of their condition is done according to relevant standards. Further there was done a diagnostic of the steam traps through the ultrasound diagnostic. The last part of my thesis deals with the reliability of selected specific pumps in foregoing rating plant. There are showed reliability curves of selected pumps and elaboration of data from their long-term vibrations measurement.
APA, Harvard, Vancouver, ISO, and other styles
45

Lefner, Jiří. "Hodnocení mechanických a strukturních vlastností nového bloku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228721.

Full text
Abstract:
The purpose of this dilploma thesis is to evaluate mechanical and structural properties of two types casts of Al-alloy (components of the engine block) which were made by different technologies. Die casting with local squeeze casting and without local squeeze casting. First of them is used in lot manufacture of the current engine block. The aim of the foundry is to change the technology and start to produce new block by the die casting without local squeeze casting. The samples were taken from the both parts (lower and upper part) of the current and the new engine block which are made in foundry of Skoda Auto a.c. in Mladá Boleslav. Sets of mechanical and structural properties were selected, evaluated and tested by statistical programs. It was used fifty casts of the engine blocks for the experiment.
APA, Harvard, Vancouver, ISO, and other styles
46

Ranuša, Matúš. "Návrh ventilového bloku rekuperačního hydrostatického modulu vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231450.

Full text
Abstract:
The Master`s Thesis deals with design and construction of a valve block for a hydrostatic recuperative module of a vehicle with a direct application on pneu tyred roller AP 240H produced by the AMMANN company. The thesis aims to analyze recovery functions of the valve block in several operating modes of the roller, followed by a selection of the right hydraulic components from the perspective of predefined parameters and pressure differences. Design specifications are based on measurements and mathematical simulations on the experimental stand. The experimental stand for this application has been developed at 1:4 scale as compared to a real vehicle. The thesis includes also design of the supporting console for the module on the frame of the vehicle. The Master`s Thesis is a part of project EUREKA with cooperation Bosch Rexroth.
APA, Harvard, Vancouver, ISO, and other styles
47

Ovesný, Karel. "Vývoj fukčních bloků pro autonomní fotovoltaický systém." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218858.

Full text
Abstract:
The project considers realization system, which will allow us to test six different operation modes on lifetime accumulators. The system will link to computer, which will execute measurement current and tension and switch betwencharging and discharging modes. The measured values will record in someone time intervals in to computer memory. After someone time will analise these measured valuer and will provide optional operation mode.
APA, Harvard, Vancouver, ISO, and other styles
48

Váško, Ondřej. "Monitorování stavu při obrábění bloku motoru - Plazma." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413180.

Full text
Abstract:
The aim of this thesis is to design and implement two methods of predictive analysis for company Škoda Auto a.s. In the first part I have conducted a literature search on methods of predictive diagnostics. In the next part, with help from thesis consultant in Škoda Auto a.s., the analysis of the assembly line and data blocks from machinery and measuring has been made. Then I designed and programmed data generator based on real data. I created two methods of predictive diagnostics, capable of analyzing input data and deciding about their condition. In the end I tested these two methods and evaluated accuracy of their prediction. Main output of my thesis is two methods of predictive diagnostics, feasible in real world.
APA, Harvard, Vancouver, ISO, and other styles
49

Jenisová, Veronika. "Fashion blogy ako nástroj propagácie módnych značiek." Master's thesis, Vysoká škola ekonomická v Praze, 2010. http://www.nusl.cz/ntk/nusl-200326.

Full text
Abstract:
This diploma thesis concerns the use of fashion blogs as a mean of promotion for companies in fashion industry. With cooperation with GANT Czech republic, s.r.o. I will give an overview how a practical cooperation of a company and fashion bloggers might look like. Based on which criteria company chooses a blogger to interact with, how the work is done and what are the posibilities for the future. Thesis consists of two parts. First one is theoretical and touches topics as brands, fashion industry and new phenomenon of blogs in this indrustry that companies started to use heavily as a promotional tool for brand awareness. Second part is practical giving the characterisctics of a blogger and a reader or follower of a blog a exact steps how to cooperate with a blogger.
APA, Harvard, Vancouver, ISO, and other styles
50

Hudec, Karel. "Bytový dům ve svahu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-227151.

Full text
Abstract:
Subject of master´s thesis is an apartment building in Uhersky Brod. Subject is designed on a sloped site in central urban area of the city. Apartments are placed on three floors above the ground level, in underground floor is situated a garage. Vertical load-bearing structures in lower floors are made of monolithic reinforced concrete, upper floors are made of ceramic blocks HELUZ. Whole building is insulated with external thermal insulation composite system. Horizontal structures are made of monolithic reinforced concrete. Roof is partly mono-pitched, partly double-pitched truss roof.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the bibliographies on the topic 'Bloky' for other source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography