Log in

Relevant bibliographies by topics / Bohler

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Bohler'

Author: Grafiati

Published: 4 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Bohler.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Bohler"

1

Pombo, Bruno, Ana Cristina Ferreira, and Luís Costa. "Bohler Angle and the Crucial Angle of Gissane in Paediatric Population." Clinical Medicine Insights: Arthritis and Musculoskeletal Disorders 12 (January 2019): 117954411983522. http://dx.doi.org/10.1177/1179544119835227.

Full text

Abstract:

Bohler angle and the crucial angle of Gissane are used on the evaluation of calcaneus fractures. However, few authors have described the variation of the angles when the calcaneus is growing. In this study, Bohler angle and the crucial angle of Gissane in paediatric population were measured using lateral foot radiographs of 429 patients, from 0 to 16 years of age. The control group was composed of 70 adult patients. The sample had a mean Bohler angle of 35.4° ± 5.9° and a mean crucial angle of Gissane of 110.5° ± 7.4°. The greater mean difference was identified for Bohler angle (8°) in the age group of 5 to 8 years (39.6° ± 5.7°) and for the crucial angle of Gissane (5°-6°) in the age group of 0 to 4 years (115.8° ± 7.3) ( P < .05). The influence of the ossification centres on the geometry of the calcaneus across age groups makes Bohler angle and the crucial angle of Gissane higher in young children. The increase in Bohler angle points out the relative development of the posterior facet in young children and the importance of the reconstruction of the posterior facet height in the intra-articular calcaneus fractures. Level of Evidence: Diagnostic study; Level III.

APA, Harvard, Vancouver, ISO, and other styles

2

Setiawan, Hera. "Pengaruh Proses Heat Treatment Pada Kekerasan Material Special K (K100)." Simetris : Jurnal Teknik Mesin, Elektro dan Ilmu Komputer 2, no. 1 (June 28, 2013): 37. http://dx.doi.org/10.24176/simet.v2i1.96.

Full text

Abstract:

Abstrak Penelitian ini bertujuan untuk mempelajari pengaruh proses perlakuan panas (heat treatment) terhadap kekerasan material special K (K 100). Material Special K (K100) dengan ukuran 25 mm x 20 mm x 50 mm dilakukan proses heat treatment sesuai dengan instruction for treatment BOHLER STEEL MANUAL, yaitu hardening dengan temperatur 950C dan quenching dengan media pendingin oli, kemudian dilanjutkan tempering dengan temperatur 200 C dan holding time 60 menit. Kekerasan sebelum dan sesudah proses heat treatment diperiksa dan dibandingkan. Hasilnya menunjukkan bahwa harga kekerasan rata-rata raw material Special K (K100) adalah 20 HRC, setelah proses hardening dan quenching 64 HRC, dan setelah tempering adalah 62 HRC. Kata kunci : heat treatment, special K (K100), BOHLER, kekerasan.

APA, Harvard, Vancouver, ISO, and other styles

3

Sengodan, Vetrivel C., K. H. Amruth, and Karthikeyan. "Bohler's and Gissane Angles in the Indian Population." Journal of Clinical Imaging Science 2 (December 4, 2012): 77. http://dx.doi.org/10.4103/2156-7514.104310.

Full text

Abstract:

Objective: The aim of our study is to determine the normal ranges of the calcaneal parameters in the Indian population, and to compare the results with the data in the literature. Materials and Methods: The study was conducted at Coimbatore Medical College Hospital, Coimbatore on the feet (324 in number) of male and female Indian adults. Lateral view of the ankle was taken using a digital X-ray machine. Two parameters namely Bohler`s and Gissane angles were measured, independently by two radiologists to prevent inter-observer variation. Results: The Bohler`s and Gissane angles for the Indian population are statistically different from those seen in the published data for other population groups, as evidenced by the P value (P < 0.05). Conclusion: Calcaneal parameters specific to the Indian population have to be taken into consideration by the orthopedic surgeon to improve the standard of calcaneal fracture treatment in India.

APA, Harvard, Vancouver, ISO, and other styles

4

Zhang, Guangming, Shenglong Ding, and Zhiyong Ruan. "Minimally invasive treatment of calcaneal fracture." Journal of International Medical Research 47, no. 8 (July 18, 2019): 3946–54. http://dx.doi.org/10.1177/0300060519853402.

Full text

Abstract:

Objective This study was performed to analyze the outcomes of calcaneal fractures using a minimally invasive internal fixation method with a thin plate and bone grafting. Methods This retrospective analysis included 21 patients treated using our minimally invasive approach. The outcome measures were the change in the Bohler and Gissane angles and the calcaneus width after fixation. The clinical outcomes were evaluated by the Maryland foot scoring system and assessment of soft tissue complications. Results The follow-up time was 12 to 18 months. The Bohler angle, Gissane angle, and width of the calcaneus were significantly different between the preoperative and postoperative periods. The rate of excellent and good outcomes was 85.7% according to the Maryland foot scoring system. The incidence of soft tissue complications was 14.3%. Conclusion Treatment of calcaneal fractures using a minimally invasive internal fixation method with a plate and bone grafting provides good to excellent clinical outcomes with few soft tissue complications.

APA, Harvard, Vancouver, ISO, and other styles

5

Pitts, Charles, Adam Almaguer, Jack Wilson, and Michael Johnson. "Radiographic Outcomes of Plate vs Screw Constructs in Open Reduction and Internal Fixation of Calcaneus Fractures via the Sinus Tarsi Approach." Foot & Ankle Orthopaedics 4, no. 4 (October 1, 2019): 2473011419S0034. http://dx.doi.org/10.1177/2473011419s00343.

Full text

Abstract:

Category: Hindfoot, Trauma Introduction/Purpose: Intra-articular fractures of the calcaneus are a common injury to the hindfoot following high energy trauma to the lower extremity. Treatment of these fractures has evolved. Due to the concern of wound complications associated with extensile open treatments, smaller incision techniques, such as the sinus tarsi approach, are increasing in popularity. A number of fixation strategies are utilized with this approach, and it is unknown which most accurately restores radiographic alignment. The purpose of this study is to compare the postoperative radiographic outcomes of a plate and screw construct versus a cannulated screw construct when using the sinus tarsi approach for open reduction and internal fixation (ORIF) of calcaneus fractures. Methods: After IRB approval, records for all patients treated surgically at our institution for calcaneus fractures from 2012 to 2017 were reviewed. Inclusion criteria were intra-articular calcaneus fractures, patients aged 18 years or older, and use of the sinus tarsi approach. Exclusion criteria were open fractures and clinical follow up less than 6 weeks. A total of 51 fractures underwent ORIF using cannulated screws alone (Group 1), and 23 fractures underwent ORIF using a sinus tarsi plate (Group 2). The primary outcomes of interest included pre- and postoperative Bohler and Gissane angles, wound complications, and unplanned return to OR. Results: There was no statistically significant difference between preoperative Bohler angles for Group 1 (14.5 degrees) versus Group 2 (12.3 degrees) (p=0.35), nor was there a significant difference between postoperative Bohler angles between Group 1 (30.1 degrees) and Group 2 (27.0 degrees) (p=0.09). Similarly, preoperative Gissane angles for Group 1 (128.4 degrees) and Group 2 (134.5 degrees) (p=0.17) and postoperative Gissane angles for Group 1 (116.7 degrees) and Group 2 (118.8 degrees) (p=0.44) showed no statistically significant difference. There were a total of 3 wound complications in Group 1 versus 2 wound complications in Group 2 (p=0.76). There was no statistically significant difference in operative duration (p=0.97) or the number of unplanned returns to the OR between the two groups (p=0.77). Conclusion: When comparing the cannulated screw and plate and screw fixation techniques, there was no difference in restoration of the Bohler and Gissane angles. Both techniques had similar rates of postoperative complications and return to the OR. Our data suggests that fixation using cannulated screws alone versus sinus tarsi plate provide similar radiographic outcomes and risk of complications. The two techniques are also similar in terms of implant costs. Our results indicate that either technique effectively improves radiographic parameters.

APA, Harvard, Vancouver, ISO, and other styles

6

Huber, Daniel, Christof Sommitsch, and Martin Stockinger. "Comparison between Microstructure Evolution in IN718 and ATI Allvac® 718Plus^TM – Simulation and Trial Forgings." Advanced Materials Research 278 (July 2011): 168–73. http://dx.doi.org/10.4028/www.scientific.net/amr.278.168.

Full text

Abstract:

Aerospace gas turbine disks operate in an environment of relatively high stresses caused by centrifugal forces and elevated temperatures. Because of the strong mechanical requirements and narrow specifications of such parts not only a correct, defect free final geometry is necessary, but also a defined microstructure. Even though the microstructure evolution during thermo-mechanical processing is well studied and understood for superalloys like IN718, the influences cannot easily be described analytically. Thus simulation tools are used to assure process stability and to optimize design parameters to meet the tough requirements in aerospace industries. Microstructure simulation of IN718 (and other materials) is well established at Bohler Schmiedetechnik GmbH & Co KG and appreciated by its customers. The advent of the newly developed nickel-base superalloy ATI Allvac® 718PlusTM led to extensive investigations and the development of an adapted microstructure model by Bohler Schmiedetechnik GmbH & Co KG and its research partners. Aim of this paper is a comparison of the microstructure evolution in IN718 and ATI Allvac® 718PlusTM during the thermo-mechanical treatment of turbine disks. Influences of process temperature, strain and strain rate on the final grain size are discussed by finite element simulations with a coupled grain structure model. Experimental results from trial forgings are compared with the outcome of the microstructure simulations.

APA, Harvard, Vancouver, ISO, and other styles

7

Jewlikar, Ajay D., Vaibhav V. Joshi, and Sachin Borse. "HPT Process Parameter Optimization in Dry Turning of Bohler K110 Steel." Materials Today: Proceedings 2, no. 4-5 (2015): 2414–22. http://dx.doi.org/10.1016/j.matpr.2015.07.180.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Lee, DongOh, Jeong-Hyun Yoo, Dong-Wook Son, and Do-Hyun Kim. "Is the Bohler angle reliable for operative reduction of calcaneus fracture?" Journal of Orthopaedic Science 24, no. 3 (May 2019): 521–25. http://dx.doi.org/10.1016/j.jos.2018.10.023.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Ninan, Shiby, C. Manigandan, and Ashish K. Gupta. "POSTOPERATIVE CARE OF FLAPS USING THE BOHLER BRAUN FRAME: AN INNOVATION." Plastic and Reconstructive Surgery 115, no. 2 (February 2005): 676–77. http://dx.doi.org/10.1097/01.prs.0000149070.57787.48.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Venter, Francois. "Editorial." Potchefstroom Electronic Law Journal/Potchefstroomse Elektroniese Regsblad 14, no. 3 (June 9, 2017): 1. http://dx.doi.org/10.17159/1727-3781/2011/v14i3a2580.

Full text

Abstract:

On 22 and 23 April 2010 the NWU (Potchefstroom Campus) Faculty of Law hosted a colloquium in collaboration with and sponsored by the Konrad-Adenauer Stiftung on the theme Good Governance in Land Tenure. In this issue we publish a selection of edited and reworked papers presented during the colloquium. A foreword to this joint issue of the Faculty and KAS by the Resident Representative of KAS in South Africa, Dr Werner Bohler, opens the discussion of a topic of global and local significance.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Bohler"

1

Bohler, Cecilia [Verfasser]. "New Results on Abstract Voronoi Diagrams / Cecilia Bohler." Bonn : Universitäts- und Landesbibliothek Bonn, 2015. http://d-nb.info/1077290063/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

BAGNI, MARINA. "Les fractures comminutives du rachis thoraco-lombaire traitees par la methode orthopedique de bohler : etude retrospective a propos de 20 cas avec recul superieur a un an." Nice, 1991. http://www.theses.fr/1991NICE6518.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Dercks, Christian [Verfasser]. "Momenten-Rotationstragfähigkeit von Spundwänden aus Z-Bohlen und U-Bohlen mit verminderter Schubkraftübertragung / Christian Dercks." Aachen : Shaker, 2004. http://d-nb.info/1172612676/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Bohlen, Oliver [Verfasser]. "Impedance-based battery monitoring / Oliver Bohlen." Aachen : Shaker, 2008. http://d-nb.info/1161305939/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Advocat, Amy. "[A] New tonal world: The Bohlen-Pierce Scale." Thesis, McGill University, 2010. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=96150.

Full text

Abstract:

This paper compares the Bohlen-Pierce scale to other octave and nonoctave-based tuning systems, drawing parallels between it and the widely used 12-equal temperament. These parallels lead to the hypothesis that there can be a set ofharmonic mIes applicable to the Bohlen-Pierce scale that are analogous to the CUITent musical practice. Those theorized mIes are then applied to some examples of the growing body of musical compositions wrtten in the BohlenPierce scale. Aiso included are supportive arguments for a preference of the use of odd-partial timbres in performance of this scale, which make the invention of the Bohlen-Pierce clarinet a major tuming point in the scale's development. Sorne of the musical works studied were written specifically for this author's performance on the Bohlen-Pierce clarinet.
Ce document compare la gamme Bohlen-Pierce d'autres systmes d'accord octave et non-octave-bass, tablissant des parallles entre soi et le systme la plus utilis, temprament de I2-gal. Ces parallles mnent la possibilit qu'il peut tre des rgles harmoniques applicables la gamme BohlenPierce qui sont analogues la pratique musicale courante. Ces rgles thorises sont alors appliques quelques exemples du corps croissant de compositions musicales crites la gamme Bohlen-Pierce. Il-y-a aussi inclus des arguments qui support la prfrence d'utilisation des timbres impair-partiels dans la performance de cette gamme, qui ferait l'invention de la clarinette Bohlen-Pierce un point tournant majeur dans la dveloppement de cette gamme. Certains compositions etudi a t ecris pour la prformance sur clarinet Bohlen-Pierce par cette auteure .

APA, Harvard, Vancouver, ISO, and other styles

6

Müller, Nora-Louise [Verfasser]. "The Bohlen-Pierce Clarinet. Theoretical Aspects and Contemporary Applications : Die Bohlen-Pierce-Klarinette. Theoretische Aspekte und zeitgenössische Anwendungen / Nora-Louise Müller." Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky, 2019. http://d-nb.info/1225711541/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bohlen, Karsten [Verfasser]. "Boutet de Monvel's calculus via groupoid actions / Karsten Bohlen." Hannover : Technische Informationsbibliothek und Universitätsbibliothek Hannover (TIB), 2015. http://d-nb.info/1069938076/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Bohlen, Anne [Verfasser]. "Der "Body Mass Index" : eine bibliometrische Analyse / Anne Bohlen." Berlin : Medizinische Fakultät Charité - Universitätsmedizin Berlin, 2010. http://d-nb.info/1024004066/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Bohlen, Marc [Verfasser]. "Die arbeitsvertragliche Befristung mittels eines gerichtlichen Vergleichs / Marc Bohlen." Frankfurt : Peter Lang GmbH, Internationaler Verlag der Wissenschaften, 2015. http://d-nb.info/1080398376/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Koschützke, Leif Torben [Verfasser], Bohlen und Halbach Oliver [Akademischer Betreuer] von, Bohlen und Halbach Oliver [Gutachter] von, and Gabriele [Gutachter] Rune. "Verhaltensanalyse von SrGAP3-Defizienz im Tiermodell / Leif Torben Koschützke ; Gutachter: Oliver von Bohlen und Halbach, Gabriele Rune ; Betreuer: Oliver von Bohlen und Halbach." Greifswald : Ernst-Moritz-Arndt-Universität, 2018. http://d-nb.info/1174305525/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Bohler"

1

Paul, Chanette. Boheem. Pretoria: LAPA, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Jay, Margaret Beheler. Behe ler/Boheler family tree. Shelby, N.C. (P.O. Box 2261, Shelby 28151): Broad River Genealogical Society, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Beckman, Ulf. Jonas Bohlin. [Stockholm]: Raster förlag, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Bohren, Rudolf. Edition Bohren. Waltrop: Spenner, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Wenzinger, Louise C. Bohrer von Laufen: Aus einer Familiengeschichte. Basel: Wenzinger, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Trznadel, Jacek. Mój bohater Kukliński. Warszawa: Fundacja Pomocy "Antyk", Wydawn. "Antyk" - Marcin Dybowski, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ruszczyc, Marek. Bohater spod Racławic. Warszawa: Instytut Wydawn. "Nasza Księgarnia", 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Piekara, Magdalena. Bohater powieści socrealistycznej. Katowice: Wydawn. Gnome, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Trznadel, Jacek. Moj bohater Kuklinski. Warszawa: Fundacja Pomocy Antyk "Wydawnictwo Antyk Marcin Dybowski", 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Toborek, Tomasz. Warszyc: Wyklęty bohater. Warszawa: Demart, 2013.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Bohler"

1

Weinert, K., K. Schulte, and D. Thamke. "Bohren von Stahl mit Wendeschneidplatten-Bohrern." In Werkstattstechnik, 475–78. Berlin, Heidelberg: Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-662-24703-7_20.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yourdon, Ed. "Ken Bohlen." In CIOs at Work, 211–30. Berkeley, CA: Apress, 2011. http://dx.doi.org/10.1007/978-1-4302-3555-2_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Schuhmann, Karl. "Hellmuth Bohner." In Edmund Husserl: Briefwechsel, 1019–22. Dordrecht: Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-011-0745-7_45.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Adam, Peter. "Elektrochemisches Bohren (EC-Bohren)." In Fertigungsverfahren von Turboflugtriebwerken, 88–98. Basel: Birkhäuser Basel, 1998. http://dx.doi.org/10.1007/978-3-0348-8769-4_22.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Tschätsch, Heinz, and Jochen Dietrich. "Bohren." In Praxis der Zerspantechnik, 94–135. Wiesbaden: Vieweg+Teubner, 2011. http://dx.doi.org/10.1007/978-3-8348-8197-7_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Dietrich, Jochen, and Heinz Tschätsch. "Bohren." In Praxis der Zerspantechnik, 101–42. Wiesbaden: Springer Fachmedien Wiesbaden, 2014. http://dx.doi.org/10.1007/978-3-658-04923-2_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Böge, Alfred. "Bohren." In Technologie/Technik, 195–201. Wiesbaden: Vieweg+Teubner Verlag, 1988. http://dx.doi.org/10.1007/978-3-322-83498-0_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Tschätsch, Heinz. "Bohren." In Praxis der Zerspantechnik, 92–131. Wiesbaden: Vieweg+Teubner Verlag, 2005. http://dx.doi.org/10.1007/978-3-322-99436-3_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kolymbas, Dimitrios. "Bohren." In Pfahlgründungen, 104–10. Berlin, Heidelberg: Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-52329-8_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Böge, Wolfgang. "Bohren." In Handbuch Maschinenbau, 1299–305. Wiesbaden: Springer Fachmedien Wiesbaden, 2017. http://dx.doi.org/10.1007/978-3-658-12529-5_78.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Bohler"

1

Niehues, S., J. Vahldiek, and B. Hamm. "Bohrer-unterstützte Knochenbiopsien: Wird die Temperatur zum Problem?" In 99. Deutscher Röntgenkongress. Georg Thieme Verlag KG, 2018. http://dx.doi.org/10.1055/s-0038-1641330.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Li, Hangyu, Hong Xu, and Sarana Nutanong. "Bohr." In CoNEXT '18: The 14th International Conference on emerging Networking EXperiments and Technologies. New York, NY, USA: ACM, 2018. http://dx.doi.org/10.1145/3281411.3281418.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sorg, M., J. Osmers, R. Spicher, and A. Fischer. "Automatische Bestimmung der Bohrkanallänge beim medizinischen Bohren." In Deutscher Kongress für Orthopädie und Unfallchirurgie. Georg Thieme Verlag KG, 2020. http://dx.doi.org/10.1055/s-0040-1717326.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Gaul, L., and R. Nitsche. "Friction Control for Vibration Suppression." In ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/vib-8191.

Full text

Abstract:

Abstract Friction damping in bolted joint connections of large space structures turned out to be a major source of damping (Gaul and Bohlen, 1987). For vibration suppression, the joints are designed such that the normal force in a frictional interface is controlled which improves damping performance. The use of active control to vary the normal contact force in a joint by means of a piezoelectric element is explored. A model consisting of two elastic beams connected by a single active joint is considered. A friction model with velocity dependent dynamics is used to describe the friction phenomena. A control law for friction dampers which maximizes energy dissipation instantaneously by controlling the normal force at the friction interface is proposed. The effect of displacement- and velocity-induced friction dynamics is considered for the design of the control law. We arrive at a dynamic controller which prevents frictional energy stored as potential energy in a bristle model from being returned to the system.

APA, Harvard, Vancouver, ISO, and other styles

5

Corda, Christian. "Bohr-like black holes." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2014 (ICNAAM-2014). AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4912308.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Corda, Christian. "Bohr-like black holes." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2014 (ICNAAM-2014). AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4912728.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lévai, G. "On solvable Bohr Hamiltonians." In NUCLEAR PHYSICS, LARGE AND SMALL: International Conference on Microscopic Studies of Collective Phenomena. AIP, 2004. http://dx.doi.org/10.1063/1.1805947.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

"Supporting Regional Natural Resource Management (NRM) organisations to update their NRM plans for adaptation to climate change." In 20th International Congress on Modelling and Simulation (MODSIM2013). Modelling and Simulation Society of Australia and New Zealand (MSSANZ), Inc., 2013. http://dx.doi.org/10.36334/modsim.2013.k7.bohnet.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Tie-Yan, Lian. "On the generalizations of Bohr inequality." In 2012 IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems (CYBER). IEEE, 2012. http://dx.doi.org/10.1109/cyber.2012.6319877.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

SIGMUND, PETER, and ANDREAS SCHINNER. "HEAVY-ION STOPPING: BOHR THEORY REVISITED." In Proceedings of the International Conference. WORLD SCIENTIFIC, 2001. http://dx.doi.org/10.1142/9789812810175_0016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Bohler"

1

Siddiqi, Irfan. Single Bohr Mangeton Detector. Fort Belvoir, VA: Defense Technical Information Center, October 2011. http://dx.doi.org/10.21236/ada563668.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Cushman, Richard, and Jędrzej Śniatycki. On Bohr-Sommerfeld-Heisenberg Quantization. Jgsp, 2014. http://dx.doi.org/10.7546/jgsp-35-2014-11-19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sansonetto, Nicola. Monodromy and the Bohr-Sommerfeld Geometric Quantization. GIQ, 2012. http://dx.doi.org/10.7546/giq-12-2011-320-328.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sansonetto, Nicola. Monodromy and the Bohr-Sommerfeld Geometric Quantization. Journal of Geometry and Symmetry in Physics, 2012. http://dx.doi.org/10.7546/jgsp-20-2010-97-106.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Chorazyczewski, Adam M., Paul V. Zimba, Xavier Mayali, and Joe Fox. Do Phycosphere associated bacteria affect the growth and lipid production of Phaeodactylum tricornutum Bohlin? Office of Scientific and Technical Information (OSTI), February 2019. http://dx.doi.org/10.2172/1544511.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!