Relevant bibliographies by topics / Boiling up stream

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Boiling up stream'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Boiling up stream.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Boiling up stream"

1

Prokopov, M. G., D. A. Levchenko, and A. E. Artyukhov. "Investigation of Liquid-Steam Stream Compressor." Applied Mechanics and Materials 630 (September 2014): 109–16. http://dx.doi.org/10.4028/www.scientific.net/amm.630.109.

Full text
Abstract:
Thermophysical model of liquid-steam stream compressor, results of analysis of experimental researches of boiling up streams of liquid in the broadening ducting and running part of liquid-steam stream compressor, description of forming of three critical modes of flow and structural inversion of stream are presented in this article. The mathematical model of working process which allows to determine parameters and characteristics of liquid-steam stream compressor is presented.
APA, Harvard, Vancouver, ISO, and other styles
2

Gasanov, B. M., and N. V. Bulanov. "The study of the intensity of heat transfer when the liquid boils in confined spaces of narrow channels." Herald of the Ural State University of Railway Transport, no. 2 (2024): 29–44. http://dx.doi.org/10.20291/2079-0392-2024-2-29-44.

Full text
Abstract:
The article presents the results of an experimental study of heat transfer during boiling of a stream of water underheated up to the temperature of saturated vapors. The experiments aimed at the study the effect of confined space on the heat transfer intensity during the horizontal flow of water in narrow (along the full vertical extent) channels. Channels with heights of 7.0, 3.0, 0.6 and 0.3 mm were studied. The experiments were carried out at atmospheric pressure, mass flow rates of 127-370 kg/(m2•s), heat flows of 50-4800 kW/m2 and under heating of water at the entrance to the channel by 3
APA, Harvard, Vancouver, ISO, and other styles
3

Chou, X. S., and L. C. Witte. "Subcooled Flow Film Boiling Across a Horizontal Cylinder: Part I—Analytical Model." Journal of Heat Transfer 117, no. 1 (1995): 167–74. http://dx.doi.org/10.1115/1.2822298.

Full text
Abstract:
An analytical model of stable subcooled flow film boiling on the front of a horizontal cylinder and a model for the wake region downstream of the flow separation points were developed. The flow and temperature fields upstream of the separation points were represented by a “local-similarity” solution obtained through a rigorous mathematical transformation. The transformed governing equations were solved numerically using a finite-difference scheme. Numerical solutions for the vapor layer thickness, the velocity, and the temperature fields were obtained for both the liquid and vapor layers. The
APA, Harvard, Vancouver, ISO, and other styles
4

Kain, Vivekanand, Shagufta Khan, A. V. R. Reddy, and P. K. Wattal. "Corrosion of Non-Sensitized Austenitic Stainless Steels in Nitric Acid Environment: An Electrochemical Approach." Advanced Materials Research 794 (September 2013): 517–29. http://dx.doi.org/10.4028/www.scientific.net/amr.794.517.

Full text
Abstract:
The austenitic stainless steels are used in nuclear spent fuel reprocessing and waste management plants and the process fluid is nitric acid at temperature up to boiling point. However incorporation of oxidizing ions e.g. fission products as well as corrosion products, in nitric acid stream make the environment highly corrosive to stainless steels. Present work aims to investigate role of process parameters and material parameters (composition and microstructure) on corrosion behaviour of stainless steels. The process parameters studied are temperature, acid concentration and oxidizing ions. I
APA, Harvard, Vancouver, ISO, and other styles
5

Karlsson, Erik. "Evaluation of sodium salt scaling in black liquor evaporators using existing process data." Nordic Pulp & Paper Research Journal 35, no. 4 (2020): 516–32. http://dx.doi.org/10.1515/npprj-2020-0038.

Full text
Abstract:
AbstractScaling caused by sodium carbonate and sodium sulphate salts is a common problem during black liquor evaporation and mills currently have no proper tools to monitor or follow it up. The method proposed enables automatic evaluation of scaling rates and behaviours, together with washing performance, by using measurements that are already available at most mills, such as the boiling point elevation and the overall heat transfer coefficient. The method identified the scaling correctly in most cases, normally >90 %, although fast and sudden scaling proved to be challenging; its performan
APA, Harvard, Vancouver, ISO, and other styles
6

Halimi, Nur Aina Najihah, Ademola Odunsi, Alex Sebastiani, and Dina Kamel. "Waste to Biofuel: Process Design and Optimisation for Sustainable Aviation Fuel Production from Corn Stover." Energies 18, no. 13 (2025): 3418. https://doi.org/10.3390/en18133418.

Full text
Abstract:
Addressing the urgent need to decarbonise aviation and valorise agricultural waste, this paper investigates the production of Sustainable Aviation Fuel (SAF) from corn stover. A preliminary evaluation based on a literature review indicates that among various conversion technologies, fast pyrolysis (FP) emerged as the most promising option, offering the highest fuel yield (22.5%) among various pathways, a competitive potential minimum fuel selling price (MFSP) of 1.78 USD/L, and significant greenhouse gas savings of up to 76%. Leveraging Aspen Plus simulation, SAF production via FP was rigorous
APA, Harvard, Vancouver, ISO, and other styles
7

Bello, Arcesio, Jaime Torres, Jorge Herrera, and José Sarmiento. "The effect of diesel properties on the emissions of particulate matter." CT&F - Ciencia, Tecnología y Futuro 2, no. 1 (2000): 31–46. http://dx.doi.org/10.29047/01225383.558.

Full text
Abstract:
An evaluation was carried out on the effect that modifying some properties of Colombian diesel fuel, such as final boiling point (FBP), density and sulfur content, has on the emissions of particulate matter (PM). Four diesel engines with different technologies and work capacity were used for the evaluation. Different alternatives to modify the properties of commercial diesel fuel, from the fuel treatment viewpoint, as well as that of the incorporation or segregation of some of the streams from the pool at the Barrancabermeja Refinery were studied. The particulate matter was measured using a pa
APA, Harvard, Vancouver, ISO, and other styles
8

Shevtsov, A. A., T. N. Tertychnaya, V. V. Tkach, and N. A. Serdyukova. "Energy saving technology of allocation of protein-bearing fractions from oilseeds with use of the paroezhektorny thermal pump." Proceedings of the Voronezh State University of Engineering Technologies 81, no. 2 (2019): 35–40. http://dx.doi.org/10.20914/2310-1202-2019-2-35-40.

Full text
Abstract:
The production cycle of complex processing of oilseeds with receiving vegetable oil, soluble and insoluble fraction from mix of the crushed pressing with heated water is offered; a squirrel from soluble fraction, the dried-up insoluble fraction. The main basic decision on decrease in energy consumption was the optimum choice of temperature differences in the evaporator and sections of the two-section condenser when receiving drying agents, the cooling air and warm water. The deviation from these values inevitably leads to increase in the consumed energy: fall of temperature of boiling of coola
APA, Harvard, Vancouver, ISO, and other styles
9

Dlamini, M. V., Z. P. Ndlela, K. A. Dlamini, and G. Masuku. "Assessing the availability of community water at Madlangamphisi, a community in the Hhohho region of Eswatini." International Journal of Environmental & Agriculture Research 5, no. 9 (2019): 05–13. https://doi.org/10.5281/zenodo.3465449.

Full text
Abstract:
<strong><em>Abstract</em></strong><strong>&mdash;</strong> <em>The research was conducted to assess the availability of domestic water and the extent of the problems associated with water scarcity at Madlangamphisi area in the Hhohho district of Eswatini. The research was a descriptive survey. A questionnaire was used to collect both qualitative and quantitative data for the survey. A total of 169 households out of 300 households in the community were randomly selected to participate in the survey. The majority (56.2%) of the households confirmed that there was water scarcity problems in the a
APA, Harvard, Vancouver, ISO, and other styles
10

Setyaningsih, Dwi, Fidelia Folasade F Pakasy, Abdullah Jabr G. Santoso, Nadine Gracella, Neli Muna, and Faqih Udin. "Product Design of Vegetable Floss Made from Kluwih (Artocarpus camansi) Fruit." IOP Conference Series: Earth and Environmental Science 1354, no. 1 (2024): 012023. http://dx.doi.org/10.1088/1755-1315/1354/1/012023.

Full text
Abstract:
Abstract Increasing awareness of health risks encourages the development of plant-based products to replace the animal products. One of the popular snack foods is floss made from beef or chicken meat. Vegetable floss is a potential product to develop for vegetarian or kids. This study aims to provide a product design of vegetable floss made from kluwih fruit starts from formulation, characterization, scale up in small scale industry, include factory layout, calculation of cost of goods sold as well as business development model that was suitable for vegetable floss market. Notably, this study
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Boiling up stream"

1

Прокопов, Максим Геннадійович, Максим Геннадьевич Прокопов та Maksym Hennadiiovych Prokopov. "Теплофизическое моделирование рабочего процесса жидкостно-парового струйного компрессора". Thesis, Изд-во СумГУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/23679.

Full text
Abstract:
У дисертаційній роботі наведені: теплофізична модель рідинно- парового струминного компресора, результати аналізу експериментальних досліджень закипаючих потоків рідини у каналах, що розширюються, і проточній частині рідинний-парового струминного компресора, опис формування трьох критичних режимів течії і структурної інверсії потоку, характеристики компресора. Представлена математична модель робочого процесу, яка дозволяє визначати параметри і характеристики рідинно-парового струминного компресора. Створена методика інженерного розрахунку реалізована у вигляді розрахункової програми д
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Boiling up stream"

1

Abiodun Adeyemi, Majid. "Analysis of Sulfur Content in Selected Crude Oils in the World." In Recent Advances in Hydraulic Fracturing [Working Title]. IntechOpen, 2024. http://dx.doi.org/10.5772/intechopen.1003661.

Full text
Abstract:
The market value of a crude stream reflects its quality characteristics. The market value of an individual crude stream reflects its quality characteristics which is either characterized as sweet or sour. Crude oils that are sweet (low sulfur content) are usually priced higher than sour crude oils. This study analyzed of PNA, Assay-Data Cut-Yield, True boiling-point curve and sulfur content in selected sour crude oil in the world. A 2-stage Claus Process unit was used to determine the amount of sulfur left in the crude oil and ascertain if it will meet up to the market requirement standard (≤0
APA, Harvard, Vancouver, ISO, and other styles
2

Harrison, Roger G., Paul W. Todd, Scott R. Rudge, and Demetri P. Petrides. "Evaporation." In Bioseparations Science and Engineering. Oxford University Press, 2015. http://dx.doi.org/10.1093/oso/9780195391817.003.0013.

Full text
Abstract:
Evaporation is a process that involves the removal by vaporization of part of the solvent from a solution, with the objective being to concentrate the solution. In the evaporation of solutions containing biological compounds, the volatile solvent can be water or an organic solvent. Organic solvents are frequently used for antibiotics, steroids, and peptides. Often the solution is under a moderate vacuum, at pressures down to about 0.05 atm absolute [1], which is especially important for heat-sensitive biologicals where the temperature should be as low as possible to minimize degradation. The e
APA, Harvard, Vancouver, ISO, and other styles
3

Weinstein, Philip. "Dark Twins." In Becoming Faulkner. Oxford University PressNew York, NY, 2009. http://dx.doi.org/10.1093/oso/9780195341539.003.0004.

Full text
Abstract:
Abstract He had apparently been drinking fairly heavily, and the outrageous words tumbled out: “If I have to choose between the United States government and Mississippi, then I’ll choose Mississippi. [I]f it came to fighting I’d fight for Mississippi against the United States even if it meant going out into the street and shooting Negroes” (LG 261). So spoke Faulkner in a New York interview with Russell Howe. It was early 1956; civil rights turmoil was approaching a boiling point. A young black woman named Autherine Lucy had been accepted into the University of Alabama. Southerners were alread
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Boiling up stream"

1

Khan, Shagufta, and Vivekanand Kain. "Measurement and Prediction of Corrosion Damage in Stainless Steels in Nitric Acid Containing Oxidizing Ions." In CORROSION 2012. NACE International, 2012. https://doi.org/10.5006/c2012-01487.

Full text
Abstract:
Abstract The austenitic stainless steels are used in nuclear spent fuel reprocessing and waste management plants and the process fluid is nitric acid at temperature up to boiling point. However incorporation of oxidizing ions e.g. fission products as well as corrosion products, in nitric acid stream make the environment highly corrosive to stainless steels. Increasing the temperature and concentration of nitric acid and concentration of oxidizing species push the operating potential to the transpassive potential range and cause severe intergranular corrosion of even solution annealed stainless
APA, Harvard, Vancouver, ISO, and other styles
2

Singh, Preet M., Jorge J. Perdomo, Jamshad Mahmood, and Pablo Conde. "Stress Assisted Corrosion Simulation in Laboratory." In CORROSION 2004. NACE International, 2004. https://doi.org/10.5006/c2004-04518.

Full text
Abstract:
Abstract Stress Assisted Corrosion (SAC) of boiler tubes and economizer tubes from the waterside is one of the major problems in availability loss and safety of power plants and industrial boilers. Use of carbon steel for the service of high temperature water applications strongly depends upon formation and stability of the protective oxide film of magnetite, Fe3O4, on the waterside surface of boiler tubes. Failure mechanisms involved in waterside SAC surely includes film damage as an important step. To understand SAC, a recirculation loop autoclave facility for high temperature water testing
APA, Harvard, Vancouver, ISO, and other styles
3

Porter, R. L., and B. J. Saldanha. "Effect of Fe(III) Levels on the Corrosion Resistance of Titanium Alloys in HCl Solutions." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03453.

Full text
Abstract:
Abstract Corrosion tests were run concurrently at Location A and Location B to determine the effects of ferric ion [Fe(III)] content on inhibiting general corrosion of titanium Grades 2 (UNS R50400), 7 (UNS R52400), 12 (UNS R53400), 16 (UNS R52402), 27 (UNS R52254), and 28 (UNS R56323) in hydrochloric acid (HCl) solutions at 66-282°C. Tests were conducted at Location A with 1,000 and 10,000 ppm Fe(III) additions to boiling HCl solutions to establish 5 mpy isocorrosion diagrams as an extension of previous work(1). Location A tests also assessed the effects of higher temperatures (282°C) on the
APA, Harvard, Vancouver, ISO, and other styles
4

Magdowski, Ruth, and Markus O. Speidel. "Effect of Cold Work on the Growth Rates of Stress Corrosion Cracks in Structural Materials of Nuclear Systems." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96112.

Full text
Abstract:
Abstract The growth rates of stress corrosion cracks in austenitic stainless steels and nickel base alloy 600 exposed to simulated boiling water reactor coolant were measured by fracture mechanics testing techniques. Cold work may increase the crack growth rates up to one hundred times. In both, the annealed condition and the cold worked condition, the stress corrosion crack growth rates are independent of stress intensity over a wide K-range and crack growth rates correlate well with yield strength and hardness. In the annealed condition the fracture path is intergranular, but higher degrees
APA, Harvard, Vancouver, ISO, and other styles
5

Gerlock, Ronald J., and James D. Fritz. "Chloride Stress Corrosion Cracking Resistance of 6% Mo Stainless Steel Alloy." In CORROSION 2002. NACE International, 2002. https://doi.org/10.5006/c2002-02423.

Full text
Abstract:
Abstract The Fe-21Cr-24Ni-6Mo UNS N08367 alloy was designed to be a seawater resistant alloy and has been successfully used in a multitude of marine and offshore applications including process piping systems, heat exchanger equipment, drilling platforms, and desalination systems. Although the N08367 alloy has improved resistance to chloride stress corrosion cracking (CSCC) it is not completely immune to this mode of failure. This investigation exposed U-bend specimens to various chloride bearing solutions to better define cracking threshold of the N08367 alloy. Samples were exposed in an autoc
APA, Harvard, Vancouver, ISO, and other styles
6

Goel, Arvind, Chandra Venkatraman, and Chris Halter. "Diamond-Like Nanocomposite Protective Films for Corrosive Environments." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96618.

Full text
Abstract:
Abstract Diamond-Like Nanocomposite (DLN) films constitute a class of amorphous thin films that are comprised of interpenetrating atomic scale diamond-like (a-C:H) and quartz-like (a-Si:O) networks. The coatings can be doped with a range of metallic and non-metallic materials in a variety of forms (random dispersion, third network, etc.), resulting in a range of controllable properties and combinations of properties. These films, characterized by inherently low stress, can be deposited without pin-holes. Because of this, DLN films exhibit enhanced corrosion resistance to salt fog, acidic (HCl,
APA, Harvard, Vancouver, ISO, and other styles
7

Yau, Te-Lin. "Corrosion of Ti-3Al-2.5v in Seawater." In CORROSION 1989. NACE International, 1989. https://doi.org/10.5006/c1989-89107.

Full text
Abstract:
Abstract A comparison on the corrosion properties of commercially pure titanium (CP Ti, UNS R50400) and TI-3Al-2.5V (Ti 325, UNS R56320) in seawater is made basing the results of crevice corrosion, U-bend and electrochemical tests. Both metals have about the same corrosion resistance in seawater at temperatures up to 200°C. They have excellent resistance to stress corrosion cracking in boiling seawater, even under the steel coupling condition and the presence of sulfide ions in seawater. Nevertheless, small differences have been found. CP Ti is more resistant to pitting than Ti 325 in seawater
APA, Harvard, Vancouver, ISO, and other styles
8

Angeliu, Thomas M., Peter L. Andresen, and Michael L. Pollick. "The IGSCC Behavior of L-Grade Stainless Steels in 288°C Water." In CORROSION 1997. NACE International, 1997. https://doi.org/10.5006/c1997-97097.

Full text
Abstract:
Abstract The intergranular stress corrosion cracking (IGSCC) susceptibility of the weld heat affect zone (HAZ) of 304L and 316L SS was evaluated in 288°C high purity water at ~+200mVSHE, representative of the boiling water nuclear reactor core environment. Slow strain rate tensile testing results show that both 0.031 wt.%C and 0.008 wt.%C 304L SS materials exhibit IG fracture morphology in the weld HAZ when aged between 450 and 550°C for times up to 2000 hours, while a 316L material exhibits only a trace of transgranular failure. The IG cracking is dependent on the corrosion potential and is s
APA, Harvard, Vancouver, ISO, and other styles
9

Dolley, Evan J., Peter L. Andresen, Martin M. Morra, Xiaoyuan Lou, and Raul B. Rebak. "Cracking Resistance of Chromium Rich Alloys in High Temperature Water." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-4293.

Full text
Abstract:
Abstract GE Global Research, 1 Research Circle, Schenectady, NY 12309, USA Light water reactors structural materials such as austenitic stainless steels and nickel based alloys containing 15-18 wt% chromium (Cr) may be susceptible to stress corrosion cracking (SCC), especially in the cold worked condition. Nickel based Alloy 690 or N06690 with 30 wt% Cr, is more resistant to SCC in high temperature water. The purpose of this study was to evaluate SCC susceptibility of commercially available alloys with varying contents of Cr between 18 wt% and 33 wt% and with different microstructural conditio
APA, Harvard, Vancouver, ISO, and other styles
10

Angeliu, Thomas M., Young J. Kim, Peter L. Andresen, and Dale F. Taylor. "The Stability of Nitrate in High Temperature Water." In CORROSION 1996. NACE International, 1996. https://doi.org/10.5006/c1996-96087.

Full text
Abstract:
Abstract Hydrogen water chemistry reduces the stress corrosion cracking (SCC) of boiling water reactor components by lowering the corrosion potential. However, the amount of N16 carried into the main steam line increases as the corrosion potential decreases. This is attributed to the reduction of nitrogen-containing species to ammonia, which is more volatile than nitrate or nitrite and readily partitions to the steam phase. An alternative method to lower the corrosion potential and mitigate SCC without large hydrogen additions is in situ noble metal deposition. With this technique, noble metal
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Boiling up stream' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography