Books on the topic 'Bolted joints – Design'

Bickford, John H. An introduction to the design and behavior of bolted joints. 2nd ed. New York: M. Dekker, 1990.

An introduction to the design and behavior of bolted joints. 3rd ed. New York: Marcel Dekker, 1995.

Kulak, Geoffrey L. Guide to design criteria for bolted and riveted joints. 2nd ed. New York: Wiley, 1987.

Green, Deborah L. Design of web-flange beam or girder splices. Edmonton, Alta: Dept. of Civil Engineering, University of Alberta, 1987.

McGuigan, S. System design & component selection: bolted joints and threaded fasteners. [Bristol]: SEED, 1999.

Kaushik, Iyer, and Rubin Carol A, eds. Structural shear joints: Analyses, properties and design for repeat loading. New York: ASME Press, 2005.

Xiong, Y. A design model for composite joints with multiple fasteners. Ottawa: National Research Council Canada, Institute for Aerospace Research, 1994.

Reider, Bjorhovde, Brozzetti Jacques, and Colson André, eds. Connections in steel structures: Behaviour, strength, and design. London: Elsevier Applied Science, 1988.

Moss, Peter James. Multiple-bolted joints in wood members: A literature review. Madison, Wis. (One Gifford Pinchot Dr., Madison 53705-2398): U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1997.

Moss, Peter James. Multiple-bolted joints in wood members: A literature review. Madison, Wis. (One Gifford Pinchot Dr., Madison 53705-2398): U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1997.

Moss, Peter James. Multiple-bolted joints in wood members: A literature review. Madison, Wis. (One Gifford Pinchot Dr., Madison 53705-2398): U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1997.

Kulak, Geoffrey L. High strength bolts: A primer for structural engineers. [Chicago, IL.]: American Institute of Steel Construction, 2002.

Kulak, Geoffrey L. High strength bolting for Canadian engineers. Willowdale, Ont: Canadian Institute of Steel Construction, 2005.

M, Murray Thomas. Flush and extended multiple-row moment end-plate connections. Chicago, IL: American Institute of Steel Construction, 2002.

Baker, Donald J. Design and evaluation of a bolted joint for a discrete carbon-epoxy rod-reinforced hat section. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1996.

Pressure, Vessels and Piping Conference (1993 Denver Colo ). Power plant equipment design: Bolted joints, pumps, valves, pipe and duct supports : presented at the 1993 Pressure Vessels and Piping Conference, Denver, Colorado, July 25-29, 1993. New York: ASME, 1993.

Meeting, Advisory Group for Aerospace Research and Development Structures and Materials Panel. Design of bolted joints in composites: Papers presented at the 60th meeting of the Structures and Materials Panel of Agard in San Antonio, Texas, USA on 21-26 April 1985. Neuilly sur Seine: Agard, 1986.

Pressure Vessels and Piping Conference (2010 Bellevue, Wash.). Proceedings of the ASME Pressure Vessels and Piping Conference--2010: Presented at ASME 2010 Pressure Vessels and Piping Conference/K-PVP Conference, July 18-22, 2010, Bellevue, Washington, USA. New York: American Society of Mechanical Engineers, 2010.

Czech Republic) Pressure Vessels and Piping Conference (2009 Prague. Proceedings of the ASME Pressure Vessels and Piping Conference--2009: Presented at 2009 ASME Pressure Vessels and Piping Conference, July 26-30, 2009, Prague, Czech Republic. New York, N.Y: American Society of Mechanical Engineers, 2010.

Md.) Pressure Vessels and Piping Conference (2011 Baltimore. Proceedings of the ASME Pressure Vessels and Piping Conference--2011: Presented at ASME 2011 Pressure Vessels and Piping Conference, July 17-21, 2011, Baltimore, Maryland, USA. New York, N.Y: American Society of Mechanical Engineers, 2012.

Dorsey, John T. Lightweight structural design of a bolted case joint for the space shuttle solid rocket motor. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988.

Dorsey, John T. Lightweight structural design of a bolted case joint for the space shuttle solid rocket motor. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Division, 1988.

Dorsey, John T. Structural design of an in-line bolted joint for the space shuttle rocket motor case segments. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1987.

Introduction to the Design and Behavior of Bolted Joints: Gasketed Bolted Joints (Mechanical Engineering). 4th ed. CRC, 2008.

1926-, Bickford John H., ed. Introduction to the design and behavior of bolted joints. 4th ed. Boca Raton: Taylor & Francis, 2007.

Bickford, John H. Introduction to the Design and Behavior of Bolted Joints, Fourth Edition: Non-Gasketed Joints (Mechanical Engineering). 4th ed. CRC, 2007.

Bickford, John H. Introduction to the Design and Behavior of Bolted Joints: Non-Gasketed Joints. Taylor & Francis Group, 2007.

Forest Products Laboratory (U.S.), ed. Multiple-bolted joints in wood members: A literature review. Madison, WI: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1997.

Forest Products Laboratory (U.S.), ed. Multiple-bolted joints in wood members: A literature review. Madison, WI: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1997.

Forest Products Laboratory (U.S.), ed. Multiple-bolted joints in wood members: A literature review. Madison, WI: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1997.

Tekhnologii͡a︡ vypolnenii͡a︡ vysokoresursnykh zaklepochnykh i boltovykh soedineniĭ v konstrukt͡s︡ii͡a︡kh samoletov. Moskva: "Mashinostroenie", 1987.

Reidar, Bjorhovde, Colson André, and Zandonini Riccardo, eds. Connections in steel structures III: Behaviour, strength, and design : proceedings of the thirdinternational workshop held at Hotel Villa Madruzzo, Trento, Italy, 29-31 May 1995. Oxford: Pergamon, 1996.

Ga.) International Mechanical Engineering Congress and Exposition (1996 : Atlanta. Reliability, Stress Analysis and Failure Prevention Issues in Adhesive and Bolted Connections: Presented at the 1999 Asme International Mechanical Engineering ... Design Engineering Division), Vol. 105.). Amer Society of Mechanical, 1999.

Reidar, Bjorhovde, Colson André, Zandonini Riccardo, and International Workshop on Connections in Steel Structures (3rd : 1995 : Trento, Italy), eds. Connections in steel structures III: Behaviour, strength, and design : proceedings of the third international workshop held at Hotel Villa Madruzzo, Trento, Italy, 29-31 May 1995. Kidlington, Oxford: Elsevier Science, Ltd., 1996.

Reidar, Bjorhovde, American Institute of Steel Construction., and International Workshop on Connections in Steel Structures (2nd : 1991 : Pittsburgh, Pa.), eds. Connections in steel structures II: Behavior, strength, and design : proceedings of the second international workshop held at Westin William Penn Hotel, Pittsburgh, Pennsylvania, USA, April 10-12, 1991. Chicago, IL: American Institute of Steel Construction, 1992.

C, Chamis C., and United States. National Aeronautics and Space Administration., eds. Simplified design procedures for fiber composite structural components/joints. [Washington, D.C.]: National Aeronautics and Space Administration, 1990.

An Introduction to the Design and Behavior of Bolted Joints, Third Edition, Revised and Expanded. Routledge, 2018. http://dx.doi.org/10.1201/9781315137353.

Erol, Sancaktar, American Society of Mechanical Engineers. Design Engineering Division., and International Mechanical Engineering Congress and Exposition (1997 : Dallas, Tex.), eds. Reliability, stress analysis, and failure prevention issues in adhesively bonded and bolted joints, composites design: Presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas. New York, N.Y: American Society of Mechanical Engineers, 1997.

Erol, Sancaktar, American Society of Mechanical Engineers. Design Engineering Division., and International Mechanical Engineering Congress and Exposition (2001 : New York, N.Y.), eds. Threaded and riveted connections, design issues, reliability, stress analysis, and failure prevention: Presented at the 2001 ASME International Mechanical Engineering Congress and Exposition : November 11-16, 2001, New York, New York. New York, N.Y: American Society of Mechanical Engineers, 2001.

Q, Rousseau Carl, and Langley Research Center, eds. Design and evaluation of a bolted joint for a discrete carbon-epoxy rod-reinforced hat section. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1996.

(Editor), A. Bouzid, T. Sawa (Editor), and Abdel-Hakim Bouzid (Other Contributor), eds. Analysis of Bolted Joints--2003: Presented at the 2003 Asme Pressure Vessels and Piping Conference: Cleveland, Ohio, July 20-24, 2003. American Society of Mechanical Engineers, 2003.

American Institute of Steel Construction. and Industrial Fasteners Institute. Standards and Technical Practices Committee. Structural Bolting Subcommittee., eds. Mechanical fasteners for steel bridges. Chicago, Ill: AISC Marketing, 1996.

K, Williams Dennis, Ruggles Marina B, American Society of Mechanical Engineers. Pressure Vessels and Piping Division., and Pressure Vessels and Piping Conference (1997 : Orlando, Fla.), eds. Current topics in the design and analysis of pressure vessels and piping, 1997: Presented at the 1997 ASME Pressure Vessels and Piping Conference, Orlando, Florida, July 27-31, 1997. New York, N.Y: American Society of Mechanical Engineers, 1997.

Ga.) International Mechanical Engineering Congress and Exposition (1996 : Atlanta. Reliability, Stress Analysis, and Failure Prevention Issues in Adhesively Bonded and Bolted Joints, Composites Design: Presented at the 1997 Asme International ... Design Engineering Division), V. 96.). American Society of Mechanical Engineers, 1997.

Goodling, Evans C. Power Plant Equipment Design: Bolted Joints, Pumps, Valves, Pipe and Duct Supports: Presented at the 1993 Pressure Vessels and Piping Conference, De (Pvp). American Society of Mechanical Engineers, 1993.

LaRC conceptual design of solid rocket booster in-line bolted joint. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1986.

United States. National Aeronautics and Space Administration., ed. Design And Evaluation Of A Bolted Joint For A Discrete Carbon-Epoxy Rod-Reinforced Hat Section... NASA-TM-111622... Mar. 7, 1997. [S.l: s.n., 1998.