Academic literature on the topic 'Bond failure mode'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Bond failure mode.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Bond failure mode"

1

Soraghi, Ahmad, and Qindan Huang. "Probabilistic prediction model for RC bond failure mode." Engineering Structures 233 (April 2021): 111944. http://dx.doi.org/10.1016/j.engstruct.2021.111944.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Opabola, Eyitayo A., and Kenneth J. Elwood. "Seismic assessment of reinforced concrete columns with short lap splices." Earthquake Spectra 37, no. 3 (2021): 1726–57. http://dx.doi.org/10.1177/8755293021994834.

Full text
Abstract:
Existing reinforced concrete (RC) columns with short splices in older-type frame structures are prone to either a shear or bond mechanism. Experimental results have shown that the force–displacement response of columns exhibiting these failure modes are different from flexure-critical columns and typically have lower deformation capacity. This article presents a failure mode-based approach for seismic assessment of RC columns with short splices. In this approach, first, the probable failure mode of the component is evaluated. Subsequently, based on the failure mode, the force–displacement resp
APA, Harvard, Vancouver, ISO, and other styles
3

Cao, Rihong, Wenyu Tang, Hang Lin, and Xiang Fan. "Numerical Analysis for the Progressive Failure of Binary-Medium Interface under Shearing." Advances in Civil Engineering 2018 (2018): 1–11. http://dx.doi.org/10.1155/2018/4197172.

Full text
Abstract:
Binary-medium specimens were fabricated using the particle flow code, and the shear strength, dilatancy, and failure behavior of the binary-medium specimens with different bond strength ratios (0.25, 0.5, 0.75, and 1.0) under different normal stresses were studied. Numerical results show that the bond strength ratio and normal stresses considerably influence the shear strengths of binary-medium interface. Shear strength increases as the bond strength ratio and normal stress increase. The dilation of interfaces with high bond strength ratios is more evident than those of interfaces with lower b
APA, Harvard, Vancouver, ISO, and other styles
4

Pujari-Palmer, Michael, Roger Giró, Philip Procter, Alicja Bojan, Gerard Insley, and Håkan Engqvist. "Factors That Determine the Adhesive Strength in a Bioinspired Bone Tissue Adhesive." ChemEngineering 4, no. 1 (2020): 19. http://dx.doi.org/10.3390/chemengineering4010019.

Full text
Abstract:
Phosphoserine-modified cements (PMCs) are a family of wet-field tissue adhesives that bond strongly to bone and biomaterials. The present study evaluated variations in the adhesive strength using a scatter plot, failure mode, and a regression analysis of eleven factors. All single-factor, continuous-variable correlations were poor (R2 < 0.25). The linear regression model explained 31.6% of variation in adhesive strength (R2 = 0.316 p < 0.001), with bond thickness predicting an 8.5% reduction in strength per 100 μm increase. Interestingly, PMC adhesive strength was insensitive to surface
APA, Harvard, Vancouver, ISO, and other styles
5

Pang, Yu-Yang, Gang Wu, Zhi-Long Su, and Xiao-Yuan He. "Experimental study on the carbon-fiber-reinforced polymer–steel interfaces based on carbon-fiber-reinforced polymer delamination failures and hybrid failures." Advances in Structural Engineering 23, no. 11 (2020): 2247–60. http://dx.doi.org/10.1177/1369433220911167.

Full text
Abstract:
The failure mode is crucial to the interfacial bond performance between carbon-fiber-reinforced polymer plates and steel substrates. Existing studies mainly focused on the cohesive failures in the adhesive; however, research on other types of failure modes is still limited. In this article, a series of single-shear bonded joints are prepared to investigate the bond behaviors of the carbon-fiber-reinforced polymer–steel interfaces based on carbon-fiber-reinforced polymer delamination failures and hybrid failures. Three kinds of adhesives—which have different tensile strengths and elastic moduli
APA, Harvard, Vancouver, ISO, and other styles
6

Saleh, Reham S., and Engie M. Safwat. "The influence of different surface treatment protocols and bonding agents on the repair microtensile bond strength of six-month’ aged composite: An in vitro study." Brazilian Dental Science 23, no. 4 (2020): 9p. http://dx.doi.org/10.14295/bds.2020.v23i4.2119.

Full text
Abstract:
Objective: to compare the effect of three surface treatment protocols and two intermediate agents on repairing aged composite, regarding microtensile bond strength (µTBS) and mode of fracture, at two time intervals. Material and methods: Six-month aged microhybrid composite blocks, were randomly distributed into three groups, subjected to; Fine, Super Fine grit diamond burs or Erbium- Yag Laser surface treatment. Each block had both One Coat bond SL (Bond) and Brilliant Flow flowable composite (Flow) intermediate agents, alongside. Blocks were incrementally repaired using nanohybrid composite,
APA, Harvard, Vancouver, ISO, and other styles
7

Ghavamnasiri, Marjaneh, Nasrin Sarabi, and Azadeh Forooghbakhsh. "The Influence of Adhesive Luting Systems on Bond Strength and Failure Mode of an Indirect Micro Ceramic Resin-based Composite Veneer." Journal of Contemporary Dental Practice 10, no. 1 (2009): 33–40. http://dx.doi.org/10.5005/jcdp-10-1-33.

Full text
Abstract:
Abstract Aim This study evaluated the bond strength and failure mode of enamel/resin-based composite veneers bonded with three different dual cured resin adhesive systems. Methods and Materials Standard preparations for laminate veneer restorations were made on 30 human central incisors using depth cutting burs (0.5 mm depth at the incisal area and 0.3 mm at the gingival area). Thirty indirect laminates were prepared using a highly filled polymeric material (GC Gradia) according to the manufacturer's instructions. After sandblasting the fitting surfaces, the specimens were randomly divided int
APA, Harvard, Vancouver, ISO, and other styles
8

Bonfante, Gerson, Osvaldo Bazzan Kaizer, Luiz Fernando Pegoraro, and Accácio Lins do Valle. "Tensile bond strength of glass fiber posts luted with different cements." Brazilian Oral Research 21, no. 2 (2007): 159–64. http://dx.doi.org/10.1590/s1806-83242007000200011.

Full text
Abstract:
Proper selection of the luting agent is fundamental to avoid failure due to lack of retention in post-retained crowns. The objective of this study was to investigate the tensile bond strength and failure mode of glass fiber posts luted with different cements. Glass fiber posts were luted in 40 mandibular premolars, divided into 4 groups (n = 10): Group 1 - resin-modified glass ionomer RelyX Luting; Group 2 - resin-modified glass ionomer Fuji Plus; Group 3 - resin cement RelyX ARC; Group 4 - resin cement Enforce. Specimens were assessed by tensile strength testing and light microscopy analysis
APA, Harvard, Vancouver, ISO, and other styles
9

Carrilho, M. R. O., R. M. Carvalho, M. F. de Goes, et al. "Chlorhexidine Preserves Dentin Bond in vitro." Journal of Dental Research 86, no. 1 (2007): 90–94. http://dx.doi.org/10.1177/154405910708600115.

Full text
Abstract:
Loss of hybrid layer integrity compromises resin-dentin bond stability. Matrix metalloproteinases (MMPs) may be partially responsible for hybrid layer degradation. Since chlorhexidine inhibits MMPs, we hypothesized that chlorhexidine would decelerate the loss of resin-dentin bonds. Class I preparations in extracted third molars were sectioned into two halves. One half was customarily restored (etch-and-rinse adhesive/resin composite), and the other was treated with 2% chlorhexidine after being acid-etched before restoration. Specimens were stored in artificial saliva with/without protease inhi
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Chun Ying, and Rui Zhang. "Bond Mechanics and Failure Mode of Conductive Silver Adhesive for Transducer." Advanced Materials Research 873 (December 2013): 837–44. http://dx.doi.org/10.4028/www.scientific.net/amr.873.837.

Full text
Abstract:
In this paper, a novel conductive silver adhesive (ECA) for transducer is prepared to bond piezoelectric patch and the aluminum substrate. X-ray photoelectron spectroscopy (XPS) is used to study the fracture elements in order to analyze bond mechanics, fracture morphology is observation by scanning electron microscopy (SEM). The result of test and analysis shows ECA with sliane coupling agent have both physical and chemical bonding and the fracture type is cohesive failure. However the ECA without sliane coupling agent only has physical bonding and fracture type is mixed failure.
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Bond failure mode"

1

Mohan, Preethi. "Bond strength evaluation of two resin cements with two adhesives and analysis of mode of failure." Connect to resource online, 2009. http://hdl.handle.net/1805/2079.

Full text
Abstract:
Thesis (M.S.D.)--Indiana University School of Dentistry, 2009.<br>Title from PDF t. p. (viewed Feb. 9, 2009) Advisor(s): Jeffrey A. Platt, Chair of the Research Committee, Tien-Min Gabriel Chu, Michael A. Cochran, Bruce A. Matis, Burak Taskonak, B. Keith Moore. Curriculum vitae. Includes abstract. Includes bibliographical references (leaves 71-76).
APA, Harvard, Vancouver, ISO, and other styles
2

Cozza, Alessandro. "Bond properties of SRG anchors employed to improve the effectiveness of SRG/FRCM composites." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.

Find full text
Abstract:
Fiber reinforced cementitious matrix (FRCM) composites represent a newly-developed promising alternative to traditional materials for strengthening and retrofitting reinforced concrete and masonry structures. FRCM composites present several advantages with respect to fiber reinforced polymers (FRP) composites. However, while FRP composites have been extensively studied in the last decades and several design guidelines and analytical formulations are available, FRCM composites are still in their infancy and very few data are present in the literature. Thus, another issue that should be solved r
APA, Harvard, Vancouver, ISO, and other styles
3

Ritter, Laura. "Der Einfluss von Querzug auf den Verbund zwischen Beton und Betonstahl." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-132733.

Full text
Abstract:
Der Verbundwerkstoff Stahlbeton zeichnet sich durch das effektive Zusammenwirken seiner beiden Einzelkomponenten Stahl und Beton aus. Dieses wiederum kann nur durch ausreichend gute Verbundbedingungen zwischen beiden Baustoffen gewährleistet werden. Die Verbundeigenschaften werden von zahlreichen Faktoren beeinflusst, zu denen u.a. die Oberflächenprofilierung des Stahls, die Betonfestigkeit und die Umschnürungswirkung durch den umgebenden Beton oder eine Querbewehrung zählen. Auch eine quer zum Stab angreifende Belastung kann einen erheblichen Einfluss auf den Verbundmechanismus und die Verbun
APA, Harvard, Vancouver, ISO, and other styles
4

Lorenz, Enrico. "Endverankerung und Übergreifung textiler Bewehrungen in Betonmatrices." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-170583.

Full text
Abstract:
Die sichere Einleitung und Übertragung der wirkenden Kräfte ist Bedingung für die Funktionsfähigkeit und die vollständige Ausnutzung der Tragfähigkeit von Textilbetonbauteilen und -verstärkungsschichten. So kann es bei ungünstiger Konfiguration und Anordnung der Einzelkomponenten des Verbundbaustoffes zur Ausbildung einer Vielzahl verschiedener Verbundversagensformen kommen. Diese umfassen neben der Bildung von verbundschädigenden Delaminations- und Spaltrissen lokale Abplatzungen der Betondeckung oder einen vorzeitigen Auszug der Garne aus dem Beton. Besonders beansprucht sind in diesem Zusam
APA, Harvard, Vancouver, ISO, and other styles
5

Andrade, Andréa Mello de. "Influência de variáveis metodológicas no valor da resistência de união material adesivo/substrato dentinário e, no padrão de fratura: ensaio de \"micro\" cisalhamento." Universidade de São Paulo, 2010. http://www.teses.usp.br/teses/disponiveis/23/23140/tde-01042011-124606/.

Full text
Abstract:
A influência de variáveis metodológicas no valor da resistência de união e no padrão de fratura, por ensaio de microcisalhamento, foi verificada em dentina planificada de molares humanos e estudada em quatro diferentes experimentos, nos quais dois sistemas adesivos foram utilizados (Adper Single Bond 2 e XP Bond) e uma resina composta (Filtek Z250). Foram eles: Experimento 1- momento de fotoativação do adesivo: antes ou após o posicionamento das cânulas sobre o substrato dentinário; Experimento 2- tempo de armazenagem: 10min, 24 horas, 48 horas e 7 dias em água destilada a 37oC; Experimento 3-
APA, Harvard, Vancouver, ISO, and other styles
6

Mu, Anfeng. "Analysis of disease model iPSCs derived from patients with a novel Fanconi anemia-like IBMFS ADH5/ALDH2 deficiency." Doctoral thesis, Kyoto University, 2021. http://hdl.handle.net/2433/264653.

Full text
Abstract:
京都大学<br>新制・課程博士<br>博士(医学)<br>甲第23372号<br>医博第4741号<br>新制||医||1051(附属図書館)<br>京都大学大学院医学研究科医学専攻<br>(主査)教授 滝田 順子, 教授 髙折 晃史, 教授 江藤 浩之<br>学位規則第4条第1項該当<br>Doctor of Medical Science<br>Kyoto University<br>DFAM
APA, Harvard, Vancouver, ISO, and other styles
7

Mahindre, Prajakta Prakash. "Micro-push-out bond strength and the modes of failure for a fiber-reinforced resin-post system cemented using four adhesive lutingcements." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B43224052.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mahindre, Prajakta Prakash. "Micro-push-out bond strength and the modes of failure for a fiber-reinforced resin-post system cemented using four adhesive luting cements." Click to view the E-thesis via HKUTO, 2009. http://sunzi.lib.hku.hk/hkuto/record/B43224052.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Slade, Robert Arthur. "Failure Analysis of Impact-Damaged Metallic Poles Repaired With Fiber Reinforced Polymer Composites." Master's thesis, University of Central Florida, 2012. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/5505.

Full text
Abstract:
Metallic utility poles, light poles, and mast arms are intermittently damaged by vehicle collision. In many cases the vehicular impact does not cause immediate failure of the structure, but induces localized damage that may result in failure under extreme service loadings or can promote degradation and corrosion within the damaged region. Replacement of these poles is costly and often involves prolonged lane closures, service interruption, and temporary loss of functionality. Therefore, an in situ repair of these structures is required. This thesis examines the failure modes of damaged meta
APA, Harvard, Vancouver, ISO, and other styles
10

Botthof, Jan Gregor. "Loss of rad51 in zebrafish (Danio rerio) : a novel Fanconi anaemia model." Thesis, University of Cambridge, 2017. https://www.repository.cam.ac.uk/handle/1810/270293.

Full text
Abstract:
RAD51 is an indispensable homologous recombination protein, necessary for strand invasion and crossing over. It has recently been designated as a Fanconi anaemia (FA) gene, following the discovery of two patients carrying dominant negative mutations. FA is a hereditary DNA repair disorder characterised by various congenital abnormalities, progressive bone marrow failure and cancer predisposition. The cellular and molecular pathology of FA is poorly understood, resulting in a severe lack of effective treatment options. In this thesis, I describe the first viable vertebrate model of RAD51 loss.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Bond failure mode"

1

Pollock, Rob. Total hip replacement: modes of failure. Oxford University Press, 2011. http://dx.doi.org/10.1093/med/9780199550647.003.007010.

Full text
Abstract:
♦ Total hip replacements (THRs) may fail in various ways. They may become infected, they may be subject to aseptic loosening, they may dislocate, or a periprosthetic fracture may occur. The patient with a failed THR must be thoroughly assessed before treatment is contemplated♦ Infection may be acute or chronic. Assessment involves clinical assessment, plain radiographs, blood tests (C-reactive protein and erythrocyte sedimentation rate), hip aspiration, and, sometimes, nuclear medicine. The acutely infected hip may be treated with one-stage revision. This involves thorough lavage, debridement,
APA, Harvard, Vancouver, ISO, and other styles
2

Vincent, Julian. Biomimetic materials. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780199674923.003.0010.

Full text
Abstract:
Biological materials present the conventional materials scientist with alternative ways of achieving durability, recyclability, and adaptability. Technical materials are commonly designed to resist the initiation of cracks; biological materials control disaster by initiating failure where it can be more closely controlled and the strain energy can be more easily absorbed, at the same time controlling shape so that stress concentrations are avoided in sensitive areas. Most materials are hydrated and soft, achieving stiffness by dehydration and mineralization. The low energy of the predominant h
APA, Harvard, Vancouver, ISO, and other styles
3

Dierdorf, Stephen F. Hypocalcemia/Hypercalcemia. Edited by Matthew D. McEvoy and Cory M. Furse. Oxford University Press, 2017. http://dx.doi.org/10.1093/med/9780190226459.003.0038.

Full text
Abstract:
Calcium is critical to many vital physiologic functions. These functions include cardiac rhythm and contractility, neuromuscular transmission, and skeletal muscle contractility. 45% of the calcium in the blood is ionized, which is more revalent to the physiologic function of calcium as opposed to the fraction that is bound. Serum ionized calcium levels are closely regulated by the parathyroid gland via calcium-sensing receptors and parathormone secretion. Low or high levels of calcium can result in life-threatening cardiac dysrhythmias and skeletal muscle weakness leading to respiratory failur
APA, Harvard, Vancouver, ISO, and other styles
4

Sorell, Tom, and John Guelke. Liberal Democratic Regulation and Technological Advance. Edited by Roger Brownsword, Eloise Scotford, and Karen Yeung. Oxford University Press, 2016. http://dx.doi.org/10.1093/oxfordhb/9780199680832.013.5.

Full text
Abstract:
This chapter considers an array of new technologies developed for bulk collection and data analysis that are sometimes connected by critics with mass surveillance. While the use of such technologies can be compatible with democratic principles, the NSA’s system of bulk collection has been likened to that practised by the Stasi in the former German Democratic Republic. Drawing on Pettit’s concept of domination, we dispute the comparison, conceding nevertheless that bulk collection carries risks of intrusion, error, and damage to trust. Allowing that some surveillance is bound to be secret, we i
APA, Harvard, Vancouver, ISO, and other styles
5

Keohane, Georgia Levenson. Capital and the Common Good. Columbia University Press, 2017. http://dx.doi.org/10.7312/columbia/9780231178020.001.0001.

Full text
Abstract:
Despite social and economic advances around the world, poverty and disease persist, exacerbated by the mounting challenges of climate change, natural disasters, political conflict, mass migration, and economic inequality. While governments commit to addressing these challenges, traditional public and philanthropic dollars are not enough. Here, innovative finance has shown a way forward: by borrowing techniques from the world of finance, we can raise capital for social investments today. Innovative finance has provided polio vaccines to children in the DRC, crop insurance to farmers in India, p
APA, Harvard, Vancouver, ISO, and other styles
6

Roe, Alan D. Into Russian Nature. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780190914554.001.0001.

Full text
Abstract:
Into Russian Nature examines the history of the Russian national park movement. Russian biologists and geographers had been intrigued with the idea of establishing national parks before the Great October Revolution but pushed the Soviet government successfully to establish nature reserves (zapovedniki) during the USSR’s first decades. However, as the state pushed scientists to make zapovedniki more “useful” during the 1930s, some of the system’s staunchest defenders started supporting tourism in them. In the decades after World War II, the USSR experienced a tourism boom and faced a chronic sh
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Bond failure mode"

1

Borutzky, Wolfgang. "Failure Prognosis for Hybrid Systems Based on ARR Residuals." In Bond Graph Model-based Fault Diagnosis of Hybrid Systems. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-11860-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Willert, H. G. "Failure Modes of Artificial Joint Implants Due to Particulate Implant Material." In Implant Bone Interface. Springer London, 1990. http://dx.doi.org/10.1007/978-1-4471-1811-4_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Borutzky, Wolfgang. "Structural Properties of Bond Graphs for Model-Based Control." In Bond Graph Modelling for Control, Fault Diagnosis and Failure Prognosis. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60967-2_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Liu, Feng, Kaiyu Zhang, and Kaiwen Xia. "New Bond Model in Disk-Based DDA for Rock Failure Simulation." In Springer Series in Geomechanics and Geoengineering. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-97112-4_85.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fiedler, Torben, Joachim Rösler, Martin Bäker, et al. "Mechanical Integrity of Thermal Barrier Coatings: Coating Development and Micromechanics." In Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_19.

Full text
Abstract:
Abstract To protect the copper liners of liquid-fuel rocket combustion chambers, a thermal barrier coating can be applied. Previously, a new metallic coating system was developed, consisting of a NiCuCrAl bond-coat and a Rene 80 top-coat, applied with high velocity oxyfuel spray (HVOF). The coatings are tested in laser cycling experiments to develop a detailed failure model, and critical loads for coating failure were defined. In this work, a coating system is designed for a generic engine to demonstrate the benefits of TBCs in rocket engines, and the mechanical loads and possible coating failure are analysed. Finally, the coatings are tested in a hypersonic wind tunnel with surface temperatures of 1350 K and above, where no coating failure was observed. Furthermore, cyclic experiments with a subscale combustion chamber were carried out. With a diffusion heat treatment, no large-scale coating delamination was observed, but the coating cracked vertically due to large cooling-induced stresses. These cracks are inevitable in rocket engines due to the very large thermal-strain differences between hot coating and cooled substrate. It is supposed that the cracks can be tolerated in rocket-engine application.
APA, Harvard, Vancouver, ISO, and other styles
6

Gleitze, Joshua, Heiko Klare, and Erik Burger. "Finding a Universal Execution Strategy for Model Transformation Networks." In Fundamental Approaches to Software Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-71500-7_5.

Full text
Abstract:
AbstractWhen using multiple models to describe a (software) system, one can use a network of model transformations to keep the models consistent after changes. No strategy exists, however, to orchestrate the execution of transformations if the network has an arbitrary topology. In this paper, we analyse how often and in which order transformations need to be executed. We argue why linear execution bounds are too restrictive to be useful in practice and prove that there is no upper bound for the number of necessary executions. To avoid non-termination, we propose a conservative strategy that makes execution failures easier to understand. These insights help developers and users of transformation networks to understand under which circumstances their networks can terminate. Additionally, the proposed strategy helps them to find the cause when a network cannot restore consistency.
APA, Harvard, Vancouver, ISO, and other styles
7

Zhu, Wen-bo, Guo-liang Dai, Wei-ming Gong, and Xue-liang Zhao. "Upper Bound Solution for Ultimate Bearing Capacity of Suction Caisson Foundation Based on Hill Failure Mode." In Springer Series in Geomechanics and Geoengineering. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-97112-4_104.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gotman, Irena. "Biomechanical and Tribological Aspects of Orthopaedic Implants." In Springer Tracts in Mechanical Engineering. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60124-9_2.

Full text
Abstract:
AbstractOrthopaedic and dental implant treatments have allowed to enhance the quality of life of millions of patients. Total hip/knee arthroplasty is a surgical replacement of the hip/knee joint with an artificial prosthesis. The aim of joint replacement surgery is to relieve pain improve function, often for sufferers of osteoarthritis, which affects around a third of people aged over fifty. Nowadays, total hip and knee replacement (THR) surgeries are considered routine procedures with generally excellent outcomes. Given the increasing life expectancy of the world population, however, many patients will require revision or removal of the artificial joint during their lifetime. The most common cause of failure of hip and knee replacements is mechanical instability secondary to wear of the articulating components. Thus, tribological and biomechanical aspects of joint arthroplasty are of specific interest in addressing the needs of younger, more active patients. The most significant improvements in the longevity of artificial joints have been achieved through the introduction of more wear resistant bearing surfaces. These innovations, however, brought about new tribocorrosion phenomena, such as fretting corrosion at the modular junctions of hip implants. Stiffness mismatch between the prosthesis components, non-physiological stress transfer and uneven implant-bone stress distribution are all involved in premature failure of hip arthroplasty. The development of more durable hip and knee prostheses requires a comprehensive understanding of biomechanics and tribocorrosion of implant materials. Some of these insights can also be applied to the design and development of dental implants.
APA, Harvard, Vancouver, ISO, and other styles
9

Gasser, T. Christian, and Gerhard A. Holzapfel. "A numerical framework to model 3-D fracture in bone tissue with application to failure of the proximal femur." In IUTAM Symposium on Discretization Methods for Evolving Discontinuities. Springer Netherlands, 2007. http://dx.doi.org/10.1007/978-1-4020-6530-9_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bilal Afzal, Muhammad. "Modeling of Damage Evolution of Fiber-Reinforced Composite Structure." In Safety and Risk Assessment of Civil Aircraft during Operation. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.93323.

Full text
Abstract:
This chapter is the result of a study of many special disciplines, such as damage of matrix, cracking, interface, debonding, and fiber failure. A damage mechanics model is presented to characterize brittle failure in elastic fiber-reinforced composite materials. During the life of the aircraft, cracks and damage can occur in aviation structures that should be analyzed to determine the decrease in stiffness and resistance due to the presence of the cracks. Theoretical and numerical problems related to intralaminar and interlaminar failure modeling are very well discussed. The formulations of the constitutive models presented in this chapter support the Continuum Damage Mechanics (CDM) approach and enable the control of energy dissipation in relation to each failure mode, regardless of the refinement of the network and the orientation of the fracture plane. In context to CDM, internal thermodynamic irreversible damage variables are defined to quantify the damage concentration in relation to each possible failure mode and to predict the gradual reduction in stiffness for each bond layer. Numerical examples are provided to possibly explain the capabilities of the model.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Bond failure mode"

1

Soraghi, Ahmad, Qindan Huang, and Derek A. J. Hauff. "Probabilistic Model for Rebar-Concrete Bond Failure Mode Prediction Considering Corrosion." In Structures Congress 2019. American Society of Civil Engineers, 2019. http://dx.doi.org/10.1061/9780784482247.033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Bo, Shuliang Hou, Dianzhong Liu, and Lili Sui. "Bond Failure Mode of NSM FRP Bar to Concrete Bridge Structure." In 2010 International Conference on E-Product E-Service and E-Entertainment (ICEEE 2010). IEEE, 2010. http://dx.doi.org/10.1109/iceee.2010.5660094.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cheruvu, N. S., K. S. Chan, and D. W. Gandy. "Effect of Time and Temperature on TBC Failure Mode Under Oxidizing Environment." In ASME Turbo Expo 2008: Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-51528.

Full text
Abstract:
Thermal barrier coatings (TBC) have been recently introduced on hot section components; such as transition pieces and first two stages of turbine blades and vanes of advanced F, G, and H class land-based turbine engines. The TBC coating is typically applied on metallic coated components. The metallic bond coat provides oxidation and/or corrosion protection. It is generally believed that the primary failure mode of TBCs is delamination and fracture of the top ceramic coating parallel to the bond coat in the proximity of the thermally grown oxide (TGO) between the coatings. One of the concerns a
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Fan, Hui-Ping Wang, Christina Hicks, Blair E. Carlson, Xin Yang, and Qing Zhou. "Effect of Prelube, Surface Coating and Substrate Materials on Initial Strength of Adhesive Joints Between Al Alloy and Steels." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-62577.

Full text
Abstract:
Growing usage of lightweight materials such as Al and Mg alloys in automotive body manufacture has come to a point that bonding of dissimilar materials is a realistic problem to address. A significant issue related to the bonding of dissimilar materials is that the differences in substrate surface conditions and substrate strengths often lead the bond to fail at strength far less than the bond strength established by adhesive manufacturer for a balanced joint. This research experimentally studied several factors potentially influencing initial strengths and debonding modes of adhesively-bonded
APA, Harvard, Vancouver, ISO, and other styles
5

Lall, Pradeep, and Shantanu Deshpande. "Leading Indicators for Prognostication of Impending Failures on Cu-Al Interconnects." In ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ipack2013-73287.

Full text
Abstract:
Wire bonding is predominant mode of interconnect in electronics packaging. Traditionally material used for wire bonding is gold. But industry is slowly replacing gold wire bond by copper-aluminum wire bond because of the lower cost and better mechanical properties than gold, such as high strength, high thermal conductivity etc. Numerous studies have been done to analyze failure mechanism of Cu-Al wire bonds. Cu-Al interface is a predominant location for failure of the wirebond interconnects. In this paper, the use of intermetallic thickness as leading indicator-of-failure for prognostication o
APA, Harvard, Vancouver, ISO, and other styles
6

Khong, Yong Foo, and Michael Raj Marks. "Failure Analysis on Lifted Ball Bond and Micro Lateral Crack Using Fractography Approach." In ISTFA 2013. ASM International, 2013. http://dx.doi.org/10.31399/asm.cp.istfa2013p0292.

Full text
Abstract:
Abstract This paper demonstrates the application of fractography on ductile fracture in gold wire bonding and brittle fracture in micro lateral crack of silicon chip. Different separation mode of a lifted wire ball was mapped through the study of various sizes of dimples, ductile zone and non-welded area. Multiple Focus Ion Beam (FIB) cuts were required at lateral crack area in order to expose the horizontal fracture features to determine the crack propagation direction.
APA, Harvard, Vancouver, ISO, and other styles
7

Jordan, Eric H., Maurice Gell, Doug M. Pease, et al. "Bond Strength and Stress Measurements in Thermal Barrier Coatings." In ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/97-gt-363.

Full text
Abstract:
The failure mode for thermal barrier coatings in gas turbine engines is spallation at or near the ceramic to metal interface. We propose that the two most important factors leading to this failure are the change in the bond strength and bond stress with cycling. Five methods of measuring stress near the ceramic bond coat interface and four methods of bond strength measurement were investigated. Laser fluorescence and enhanced laboratory x-ray methods have the most potential for stress measurement, while the promising bond strength measurement methods are direct pull testing, chevron notch frac
APA, Harvard, Vancouver, ISO, and other styles
8

Nassar, Sayed A., Kassem Moustafa, Zhijun Wu, and Demetrios Tzelepis. "Effect of Adhesive Nano-Additives on Static Load Transfer Capacity and Failure Mode of Bonded Steel-Magnesium Single Lap Joints." In ASME 2015 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/pvp2015-45121.

Full text
Abstract:
An experimental procedure and test setup is used for investigating effect of using nanoparticle additives to the adhesive on the load transfer capacity (LTC) of bonded magnesium (Mg)-steel (St) single lap joints (SLJ). Investigated variables include the nano-powder material (Alumina vs. Silica), particulate size (20 nm vs. 80 nm), and concentration in the adhesive (2.5% wt. vs 5.0 % wt.). Two different levels of surface roughness on the bonded area are used; namely, sanding the bond area with G60 or G180 sand paper. Test data and SEM failure mode analysis are provided.
APA, Harvard, Vancouver, ISO, and other styles
9

Liu, Y., C. Persson, P. Bengtsson, A. C. Leger, and J. Wigren. "Thermal Shock Testing and Finite Element Modeling of Pre-Oxidized Thermal Barrier Coatings." In ITSC 2000, edited by Christopher C. Berndt. ASM International, 2000. http://dx.doi.org/10.31399/asm.cp.itsc2000p0173.

Full text
Abstract:
Abstract To determine the effect of bond coat oxidation on the coating life, thermal shock testing were performed, using three different thermal cycles. The failure mode and crack paths were investigated in scanning electron microscope. A finite element model was developed to simulate the thermal shock tests. First, transient temperature fields during the thermal cycling were calculated. Second, stresses and strains evolving in the coatings due to thermal expansion mismatches and temperature gradients during the cycling were computed. The stress concentration at the interface due to the roughn
APA, Harvard, Vancouver, ISO, and other styles
10

Che, F. X., Leong Ching Wai, Hsiang-Yao Hsiao, and T. C. Chai. "Study on failure mode and mechanism of bond pad under Cu ball bonding process using wire pull test and finite element modeling." In 2015 IEEE 17th Electronics Packaging and Technology Conference (EPTC). IEEE, 2015. http://dx.doi.org/10.1109/eptc.2015.7412385.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Bond failure mode"

1

Doyle, Jesse D., Nolan R. Hoffman, and M. Kelvin Taylor. Aircraft Arrestor System Panel Joint Improvement. U.S. Army Engineer Research and Development Center, 2021. http://dx.doi.org/10.21079/11681/41342.

Full text
Abstract:
Aircraft Arresting Systems (AAS) for military applications utilize sacrificial panels made of Ultra-High Molecular Weight polyethylene (UHMWPE) that are embedded into the pavement beneath the AAS cable to protect the pavement from cable damage. Problems have been observed with the materials and practices used to seal the UHMWPE panel joints from water and debris. Data obtained from laboratory and field studies were used make improvements to current practice for sealing UHMWPE panel joints. The study evaluated four joint-sealant materials, eight alternative surface treatment and preparation tec
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!