Log in

Relevant bibliographies by topics / Bonded structures

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Bonded structures'

Author: Grafiati

Published: 4 June 2021

Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Bonded structures.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Bonded structures"

1

Takagi, Nozomi, and Shigeru Nagase. "Tin Analogues of Alkynes. Multiply Bonded Structures vs Singly Bonded Structures." Organometallics 26, no. 3 (January 2007): 469–71. http://dx.doi.org/10.1021/om060993v.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bishop, Roger, Donald C. Craig, Vi T. Nguyen, and Marcia L. Scudder. "Dialcohol Hydrogen Bonded Ladder Structures." Molecular Crystals and Liquid Crystals 390, no. 1 (January 1, 2003): 19–25. http://dx.doi.org/10.1080/10587250216163.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

WEAIRE, D., C. O’CARROLL, and M. AL-HOURANI. "EQUILIBRATION OF TETRAHEDRALLY BONDED STRUCTURES." Modern Physics Letters B 01, no. 01n02 (May 1987): 39–47. http://dx.doi.org/10.1142/s0217984987000065.

Full text

Abstract:

Tetrahedrally bonded structures, of the kind used in the study of amorphous silicon, are often relaxed to minimise energy within a simple potential scheme such as that of Keating. We discuss how this may be executed in a simple but highly efficient manner, as is desirable whenever the structure is modified many times in a Monte Carlo calculation.

APA, Harvard, Vancouver, ISO, and other styles

4

Luckyram, Jeenarainsingh, and Alan E. Vardy. "Shear displacement in bonded structures." Journal of Constructional Steel Research 16, no. 1 (January 1990): 71–84. http://dx.doi.org/10.1016/0143-974x(90)90005-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Oumeraci, Hocine, Tijl Staal, Saskia Pfoertner, Matthias Kudella, Stefan Schimmels, and Henk Jan Verhagen. "HYDRAULIC PERFORMANCE OF ELASTOMERIC BONDED PERMEABLE REVETMENTS AND SUBSOIL RESPONSE TO WAVE LOADS." Coastal Engineering Proceedings 1, no. 32 (January 21, 2011): 22. http://dx.doi.org/10.9753/icce.v32.structures.22.

Full text

Abstract:

Elastomeric bonded permeable revetments, also called PBA (Polyurethane bonded aggregate) revetments, are highly porous structures made of mineral aggregates (e.g. crushed stones) which are durably and elastically bonded by polyurethane (PU). Despite their numerous advantages as compared to conventional revetments and the large experience available from more than 25 pilot projects, physically-based design formulae to predict their hydraulic performance, wave loading and response are still lacking. Therefore, the present study aims at improving the understanding of the processes involved in the interaction between wave, revetment and foundation, based on large-scale model tests performed in the Coastal Research Centre (FZK), Hannover/Germany, and to provide prediction formulae/diagrams. This paper is focused on the prediction of the hydraulic performance (wave reflection, wave run-up and run-down) and the response of the sand core (pore pressure and effective stress) beneath the revetment for a wide range of wave conditions, including the analysis of an observed failure due to transient soil liquefaction.

APA, Harvard, Vancouver, ISO, and other styles

6

Liebisch, Sven, Juan Carlos Alcérreca Huerta, Andreas Kortenhaus, and Hocine Oumeraci. "BONDED POROUS REVETMENTS – EFFECT OF POROSITY ON WAVE-INDUCED LOADS AND HYDRAULIC PERFORMANCE." Coastal Engineering Proceedings 1, no. 33 (October 25, 2012): 45. http://dx.doi.org/10.9753/icce.v33.structures.45.

Full text

Abstract:

The porosity and roughness of bonded revetments are both crucial for the hydraulic performance and the wave loading of the revetment and its foundation, and thus for the stability and durability of the entire structure. This is briefly shown by the selected results of a tentative comparative analysis of two large-scale test series performed in the Large Wave Flume (GWK) Hanover with two significantly different revetments: a highly porous and rough polyurethane bonded aggregate (PBA) revetment and an almost impermeable and relatively smooth interlocked pattern placed block (IPPB) revetment. These results motivated the initiation of the three years research project BoPoRe (Bonded Porous Revetments) which has the primary objective to investigate more systematically and separately the relative importance of both porosity and roughness for different slope steepnesses. This project is briefly introduced and the first results of preliminary scale model tests using 9 configurations for the porosity and roughness of the revetment subject to a wide range of wave conditions (surf similarity parameters 0.93-7.21) are briefly discussed.

APA, Harvard, Vancouver, ISO, and other styles

7

Sebastian Pap, J. zsef, Tom Schiefer, and Irene Jansen. "Adhesively Bonded Structures withHybrid Yarn Textile-reinforced Plastics." Journal of The Adhesion Society of Japan 51, s1 (2015): 229–30. http://dx.doi.org/10.11618/adhesion.51.229.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Wong, Ee-Hua, and Johan Liu. "Design Analysis of Adhesively Bonded Structures." Polymers 9, no. 12 (December 1, 2017): 664. http://dx.doi.org/10.3390/polym9120664.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Potluri, P., E. Kusak, and T. Y. Reddy. "Novel stitch-bonded sandwich composite structures." Composite Structures 59, no. 2 (February 2003): 251–59. http://dx.doi.org/10.1016/s0263-8223(02)00087-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Fournel, F., C. Martin-Cocher, D. Radisson, V. Larrey, E. Beche, C. Morales, P. A. Delean, F. Rieutord, and H. Moriceau. "Water Stress Corrosion in Bonded Structures." ECS Journal of Solid State Science and Technology 4, no. 5 (2015): P124—P130. http://dx.doi.org/10.1149/2.0031505jss.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Bonded structures"

1

McConnell, Barry Kerr. "Dielectric studies of adhesively bonded structures." Thesis, University of Strathclyde, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.426326.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Graner, Solana Alejandro. "Fatigue initiation in adhesively bonded structures." Thesis, University of Surrey, 2008. http://epubs.surrey.ac.uk/844365/.

Full text

Abstract:

The objective of this research was to find patterns of fatigue initiation in adhesively bonded structures. Fatigue initiation plays a very important role in the useful life of any structure, but it is a difficult phenomenon to quantify. Three types of aluminium-FM73M single lap joints (SLJ) were tested in tensile mode at different loads. The damage was recorded using the backface strain technique. Six strain gauges (SGs) were installed to record damage. Several types of tests were performed: tests to failure, tests to limited damage and sectioning, and tests to limited damage and a residual strength test. The tests to failure were performed to obtain backface strain patterns. The specimens tested to limited damage were sectioned, polished and inspected under a microscope to study how the damage affected the adhesive. The tests to limited damage, followed by a static test to failure, were carried out to find the effect of damage on the static strength. The load-life data obtained matched previous data well. Experimental tests found that the damage appeared in the fillet as a microcrack formation, merging at the end of the test into a major crack. This pattern depended on geometry and load. The residual strength tests in specimens with limited damage showed that the joints kept a significant proportion of original static strength, even if the joint had been damaged significantly. Numerical simulations were performed in ABAQUS to match and predict fatigue life and backface strain patterns at different loads. Fortran was used to develop damage models based on user-defined field subroutines. Two elastic damage models were developed (one and two phase), which reduced the elastic modulus as damage increased. A more complete elasto-plastic damage model was also developed. In this model the elastic modulus and yield stress were reduced. This gave good predictions of both fatigue life and backface strain patterns. This model can be used to determine fatigue lives in other bonded structures and represents an important step forward in this area.

APA, Harvard, Vancouver, ISO, and other styles

3

Clark, Stewart. "Complex structures in tetrahedrally bonded semiconductors." Thesis, University of Edinburgh, 1994. http://hdl.handle.net/1842/13420.

Full text

Abstract:

Complex tetrahedral structures form good models for amorphous Group IV and III-V semiconductors. With a view of working towards examining non-crystalline materials, the structural, electronic and vibrational properties of complex tetrahedrally bonded semiconductors are investigated by various molecular dynamics techniques. First principles quantum mechanical molecular dynamics calculations are performed on two such structures and the effects of pressure on their behaviour is reported. A full free energy calculation using this method remains unfeasible and therefore an empirical bond charge model is used to calculate the full pressure-temperature phase diagram of the structures. Several surface reconstructions of a complex phase of silicon are then examined and the lowest energy surface of any silicon structure so far is found. Point defects in the diamond phase of silicon and carbon also give insight into various unusual bonding topologies that could be found in their amorphous phase. Structural and vibrational properties of several defects are considered. Finally, calculations on amorphous carbon and silicon at several densities are done and a comparison between the structural and electronic properties made. New bonding topologies are found in the structures including three centre bonding orbitals in the amorphous carbon models.

APA, Harvard, Vancouver, ISO, and other styles

4

White, Caleb, and caleb white@rmit edu au. "Health Monitoring of Bonded Composite Aerospace Structures." RMIT University. Aerospace, Mechanical and Manufacturing Engineering, 2009. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20090602.142122.

Full text

Abstract:

Airframe assemblers have long recognised that for a new aircraft to be successful it must use less fuel, have lower maintenance requirements, and be more affordable. One common tactic is the use of innovative materials, such as advanced composites. Composite materials are suited to structural connection by adhesive bonding, which minimises the need for inefficient mechanical fastening. The aim of this PhD project was to investigate the application of existing, yet immature Structural Health Monitoring (SHM) techniques to adhesively bonded composite aerospace structures. The PhD study focused on two emerging SHM technologies - frequency response and comparative vacuum monitoring (CVM). This project aimed to provide missing critical information for each technique. This included determining sensitivity to damage, repeatability of results, and operating limitations for the frequency response method. Study of the CVM technique aimed to address effectiveness of damage detection, manufacture of sensor cavities, and the influence of sensor integration on mechanical performance of bonded structures. Experimental research work is presented examining the potential of frequency response techniques for the detection of debonding in composite-to-composite external patch repairs. Natural frequencies were found to decrease over a discrete frequency range as the debond size increased; confirming that such features could be used to both detect and characterise damage. The effectiveness of the frequency response technique was then confirmed for composite patch and scarf repair specimens for free-free and fixed-fixed boundary conditions. Finally, the viability of the frequency response technique was assessed for a scarf repair of a real aircraft component, where it was found that structural damping limited the maximum useable frequency. The feasibility of CVM technique for the inspection of co-cured stiffener-skin aircraft structures was explored. The creation of sensor cavities with tapered mandrels was found to significantly alter the microstructure of the stiffener, including crimping and waviness of fibres and resin-rich zones between plies. Representative stiffened-skin structure with two sensor cavity configurations (parallel and perpendicular to the stiffener direction) was tested to failure in tension and compression. While tensile failure strength was significantly reduced for both configurations (up to 25%), no appreciable differences in compression properties were found. Two potential sensor cavity configurations were investigated for the extension of the CVM technique to pre-cured and co-bonded scarf repair schemes. The creation of radial and circumferential CVM sensor cavities was found to significantly alter the microstructure of the adhesive bond-line and the architecture of the repair material in the case of the co-bonded repair. These alterations changed the failure mode and reduced the tensile failure strength of the repair. A fibre straightening mechanism responsible for progressive failure (specific to co-bonded repairs with circumferential cavities) was identified, and subsequently supported with acoustic emission testing and numerical analysis. While fatigue performance was generally reduced by the presence of CVM cavities, the circumferential cavities appeared to retard crack progression, reducing sensitivity to the accumulation of fatigue damage. These outcomes have brought forward the implementation of SHM in bonded composite structures, which has great potential to improve the operating efficiency of next generation aircraft.

APA, Harvard, Vancouver, ISO, and other styles

5

Keat, Loh Wei. "Modelling interfacial degradation in adhesively bonded structures." Thesis, University of Surrey, 2002. http://epubs.surrey.ac.uk/798102/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Guyott, C. C. H. "The non-destructive testing of adhesively bonded structures." Thesis, Imperial College London, 1987. http://hdl.handle.net/10044/1/38341.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Thornton, Peter James. "Interlocked structures based on h-bonded barbiturate complexes." Thesis, University of Birmingham, 2015. http://etheses.bham.ac.uk//id/eprint/5985/.

Full text

Abstract:

The work contained within this thesis concerns the synthesis and characterisation of novel [2]-rotaxanes, mediated via H-bonded templation. The template in question is based upon the barbiturate receptor as developed by A. D. Hamilton which up until now had not been utilised in the synthesis of interlocked structures. The initial approaches centred on the use of long appendages of the barbiturate towards a threading, and subsequent clipping approach; however a lack of initial threading event prevented formation of the pseudorotaxane. In an attempt to overcome these difficulties, the synthesis of more rigid, dumbbell-barbiturates, were applied towards a receptor-based clipping approach, but the steric bulk acquired from the rigid spacer groups appeared to hinder any cyclisation. To overcome the problem of threading, shorter appendages were utilised and the threading was observed via a crystal structure of the complex. Subsequent stoppering of the azideterminated appendages in a CuAAC reaction afforded the first Hamilton Receptor based [2]- rotaxane. Further studies involving bichromophoric, anthracene-terminated receptors were then utilised with these barbiturate guests in the synthesis of a [2]-rotaxane via a novel light-induced photodimerisation.

APA, Harvard, Vancouver, ISO, and other styles

8

Meneghin, Ivan <1979&gt. "Bonded structures for enhanced damage tolerant pressurized fuselages." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2009. http://amsdottorato.unibo.it/1682/.

Full text

Abstract:

Adhesive bonding provides solutions to realize cost effective and low weight aircraft fuselage structures, in particular where the Damage Tolerance (DT) is the design criterion. Bonded structures that combine Metal Laminates (MLs) and eventually Selective Reinforcements can guarantee slow crack propagation, crack arrest and large damage capability. To optimize the design exploiting the benefit of bonded structures incorporating selective reinforcement requires reliable analysis tools. The effect of bonded doublers / selective reinforcements is very difficult to be predicted numerically or analytically due to the complexity of the underlying mechanisms and failures modes acting. Reliable predictions of crack growth and residual strength can only be based on sound empirical and phenomenological considerations strictly related to the specific structural concept. Large flat stiffened panels that combine MLs and selective reinforcements have been tested with the purpose of investigating solutions applicable to pressurized fuselages. The large test campaign (for a total of 35 stiffened panels) has quantitatively investigated the role of the different metallic skin concepts (monolithic vs. MLs) of the aluminum, titanium and glass-fiber reinforcements, of the stringers material and cross sections and of the geometry and location of doublers / selective reinforcements. Bonded doublers and selective reinforcements confirmed to be outstanding tools to improve the DT properties of structural elements with a minor weight increase. However the choice of proper materials for the skin and the stringers must be not underestimated since they play an important role as well. A fuselage structural concept has been developed to exploit the benefit of a metal laminate design concept in terms of high Fatigue and Damage Tolerance (F&DT) performances. The structure used laminated skin (0.8mm thick), bonded stringers, two different splicing solutions and selective reinforcements (glass prepreg embedded in the laminate) under the circumferential frames. To validate the design concept a curved panel was manufactured and tested under loading conditions representative of a single aisle fuselage: cyclic internal pressurization plus longitudinal loads. The geometry of the panel, design and loading conditions were tailored for the requirements of the upper front fuselage. The curved panel has been fatigue tested for 60 000 cycles before the introduction of artificial damages (cracks in longitudinal and circumferential directions). The crack growth of the artificial damages has been investigated for about 85 000 cycles. At the end a residual strength test has been performed with a “2 bay over broken frame” longitudinal crack. The reparability of this innovative concept has been taken into account during design and demonstrated with the use of an external riveted repair. The F&DT curved panel test has confirmed that a long fatigue life and high damage tolerance can be achieved with a hybrid metal laminate low weight configuration. The superior fatigue life from metal laminates and the high damage tolerance characteristics provided by integrated selective reinforcements are the key concepts that provided the excellent performances. The weight comparison between the innovative bonded concept and a conventional monolithic riveted design solution showed a significant potential weight saving but the weight advantages shall be traded off with the additional costs.

APA, Harvard, Vancouver, ISO, and other styles

9

Gawith, Corin B. E. "Novel active waveguide devices in direct-bonded structures." Thesis, University of Southampton, 2002. https://eprints.soton.ac.uk/15488/.

Full text

Abstract:

This thesis describes a series of experimental studies on the use of direct bonding for optical waveguide fabrication. The direct bonding technique involves contacting two ultra-clean polished surfaces to form an adhesive-free vacuum-tight bond. Optical materials bonded in this way can be formed into waveguide devices, and this work extends direct bonding to include periodically poled materials and a new solid-state ion-exchange process. The first result of this work describes the fabrication of a 5.5-mm-long, 12-µm-thick periodically poled LiNbO3 planar waveguide buried in LiTaO3. Frequency doubling experiments performed with this device demonstrate a conversion efficiency of 4.3 %W-1, a value 40% greater than that calculated for an optimised bulk device of similar length. Also demonstrated is a photorefractive iron-doped LiNbO3 waveguide buried in non-photorefractive magnesium-doped LiNbO3. In optical limiting experiments this device demonstrates a change in optical density of 2 and photorefractive response time of 5 milliseconds, representing 20 times greater optical limiting and 60 times faster operational speed than the bulk material. K+-Na+ ion-exchange between direct-bonded glass layers is studied and used as a novel solid-state technique for waveguide fabrication. This process is also developed to incorporate direct-UV-written channel waveguides in an ion-exchanged buried photosensitive glass layer. Finally, operation of a single-mode channel waveguide laser in neodymium-doped photosensitive SGBN glass (based on a composition of silica, germania, boron, and sodium) is demonstrated, with propagation losses of < 0.3 dB cm-1 and milliwatt-order lasing thresholds.

APA, Harvard, Vancouver, ISO, and other styles

10

Burke, Nichola Jayne. "Hydrogen-bonded layer structures based on guanidinium sulfonates." Thesis, University of Bath, 2005. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.413915.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Bonded structures"

1

Li, Zhan-Ting, and Li-Zhu Wu, eds. Hydrogen Bonded Supramolecular Structures. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-45756-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

A, Baker A. Bonded Repair of Aircraft Structures. Dordrecht: Springer Netherlands, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Baker, A. A., and R. Jones, eds. Bonded Repair of Aircraft Structures. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2752-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zilch, Konrad, Roland Niedermeier, and Wolfgang Finckh, eds. Strengthening of Concrete Structures with Adhesively Bonded Reinforcement. Berlin, Germany: Wilhelm Ernst & Sohn, Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, 2014. http://dx.doi.org/10.1002/9783433604014.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Khalil, Abouelmakarem Ahmed. Static analysis of bonded structures with double containment joints. Birmingham: University of Birmingham, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Broughton, James G. Performance enhancement of structures by means of bonded reinforcement. Oxford: Oxford Brookes University, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Rahimi, Hamid. Strengthening of concrete structures with externally bonded fibre-reinforced plastics. Oxford: Oxford Brookes University, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Aruleswaran, Arulnageswaran. Dynamic behaviour of adhesive bonded sub-assemblies for automotive vehicle structures. Oxford: Oxford Brookes University, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Qian, Duan. The development of two dimensional mixed finite elements for bonded joint structures. [Downsview, Ont.]: Aerospace Science and Engineering, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Institute, American Concrete, ed. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. Farmington Hills, Mich: American Concrete Institute, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Bonded structures"

1

Delgrange, G., and J. C. Ehrström. "Recent Development on Bonded Structures." In ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives, 93–104. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-1664-3_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Vittal, Jagadese J. "Hydrogen-bonded Coordination Polymeric Structures." In Frontiers in Crystal Engineering, 297–319. Chichester, UK: John Wiley & Sons, Ltd, 2006. http://dx.doi.org/10.1002/0470022612.ch12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Mayton, D. J., and James W. Wagner. "Electromagnetic Stressing of Bonded Structures." In Review of Progress in Quantitative Nondestructive Evaluation, 1107–14. Boston, MA: Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2848-7_142.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kanterakis, Georgios, Roland Chemama, and Konstantinos Kitsianos. "Bonded Repair of Composite Structures." In Revolutionizing Aircraft Materials and Processes, 359–92. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-35346-9_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lees, W. A. "A Review—The Design and Assembly of Bonded Composites." In Composite Structures, 471–506. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3662-4_36.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Marr, G. R., R. P. Barrowcliffe, and A. R. Curtis. "The Non-destructive Evaluation of Composite Bonded Joints." In Composite Structures 3, 502–10. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-4952-2_35.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Veyhl, Christoph, Rolf Winkler, Markus Merkel, and Andreas Öchsner. "Structural Characterisation of Diffusion-Bonded Hollow Sphere Structures." In Defect and Diffusion Forum, 105–12. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908451-62-0.105.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Reinhart, Theodore J. "Surface treatments for bonded repair of metals." In Bonded Repair of Aircraft Structures, 19–30. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2752-0_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Hart-Smith, L. John. "Adhesively Bonded Joints in Aircraft Structures." In Handbook of Adhesion Technology, 1101–47. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-01169-6_44.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Hart-Smith, L. John. "Adhesively Bonded Joints in Aircraft Structures." In Handbook of Adhesion Technology, 1–50. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-42087-5_44-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Bonded structures"

1

Summers, James, Fredrick R. Rutz, and Carnot Nogueira. "Shear Strength of Bonded Concrete." In Structures Congress 2020. Reston, VA: American Society of Civil Engineers, 2020. http://dx.doi.org/10.1061/9780784482896.038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Tsai, Hsi, James Alper, and David Barrett. "Failure analysis of composite bonded joints." In 41st Structures, Structural Dynamics, and Materials Conference and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2000. http://dx.doi.org/10.2514/6.2000-1428.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Selvarathinam, Alex S., and Carl Rouseau. "Practical Bonded Joint Stress Analysis." In 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2015. http://dx.doi.org/10.2514/6.2015-2067.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

null. "Inspection of bonded structures at Rolls-Royce." In IEE Colloquium on Techniques for the Inspection of Bonded Structures. IEE, 1997. http://dx.doi.org/10.1049/ic:19970054.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zeng, Q., and C. Sun. "A new bonded composite wavy lap joint." In 41st Structures, Structural Dynamics, and Materials Conference and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2000. http://dx.doi.org/10.2514/6.2000-1484.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

KAN, H., and M. RATWANI. "Analysis of step-lap joint with weakly bonded regions." In 26th Structures, Structural Dynamics, and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1985. http://dx.doi.org/10.2514/6.1985-825.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bogdanovich, Alexander, Indrajith Kizhakkethara, Alexander Bogdanovich, and Indrajith Kizhakkethara. "Three-dimensional finite element analysis of adhesively bonded plates." In 38th Structures, Structural Dynamics, and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1997. http://dx.doi.org/10.2514/6.1997-1120.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Rastogi, Naveen, B. Deepak, Som Soni, Naveen Rastogi, B. Deepak, and Som Soni. "Stress analysis codes for bonded joints in composite structures." In 38th Structures, Structural Dynamics, and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1997. http://dx.doi.org/10.2514/6.1997-1341.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Hassanen, Mahmoud A. H., and Mohammed Raoof. "R.C. Beams Upgraded with Externally Bonded Plates." In Structures Congress 2000. Reston, VA: American Society of Civil Engineers, 2000. http://dx.doi.org/10.1061/40492(2000)183.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Naboulsi, S., S. Mall, S. Naboulsi, and S. Mall. "Analysis of cracked metallic structure with imperfectly bonded composite patch." In 38th Structures, Structural Dynamics, and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1997. http://dx.doi.org/10.2514/6.1997-1363.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Bonded structures"

1

Monson, Peter A. Modeling Adsorption of Hydrogen-Bonded Molecules in Porous Structures. Fort Belvoir, VA: Defense Technical Information Center, February 2005. http://dx.doi.org/10.21236/ada430464.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hudson, Bruce S. ''Inelastic Neutron Scattering and Periodic Density Functional Studies of Hydrogen Bonded Structures''. Office of Scientific and Technical Information (OSTI), October 2004. http://dx.doi.org/10.2172/833891.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Clearfield, Abraham. The Synthesis, Structures, and Chemical Properties of Macrocyclic Ligands Covalently Bonded into Layered Arrays. Office of Scientific and Technical Information (OSTI), November 2014. http://dx.doi.org/10.2172/1164084.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Abraham Clearfield. The Synthesis, Structures and Chemical Properties of Macrocyclic Ligands Covalently Bonded into Layered Arrays. Office of Scientific and Technical Information (OSTI), July 2009. http://dx.doi.org/10.2172/959123.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Riveros, Guillermo, Felipe Acosta, Reena Patel, and Wayne Hodo. Computational mechanics of the paddlefish rostrum. Engineer Research and Development Center (U.S.), September 2021. http://dx.doi.org/10.21079/11681/41860.

Full text

Abstract:

Purpose – The rostrum of a paddlefish provides hydrodynamic stability during feeding process in addition to detect the food using receptors that are randomly distributed in the rostrum. The exterior tissue of the rostrum covers the cartilage that surrounds the bones forming interlocking star shaped bones. Design/methodology/approach – The aim of this work is to assess the mechanical behavior of four finite element models varying the type of formulation as follows: linear-reduced integration, linear-full integration, quadratic-reduced integration and quadratic-full integration. Also presented is the load transfer mechanisms of the bone structure of the rostrum. Findings – Conclusions are based on comparison among the four models. There is no significant difference between integration orders for similar type of elements. Quadratic-reduced integration formulation resulted in lower structural stiffness compared with linear formulation as seen by higher displacements and stresses than using linearly formulated elements. It is concluded that second-order elements with reduced integration and can model accurately stress concentrations and distributions without over stiffening their general response. Originality/value – The use of advanced computational mechanics techniques to analyze the complex geometry and components of the paddlefish rostrum provides a viable avenue to gain fundamental understanding of the proper finite element formulation needed to successfully obtain the system behavior and hot spot locations.

APA, Harvard, Vancouver, ISO, and other styles

6

Knowlton, W. B. Structural and phonon transmission study of Ge-Au-Ge eutectically bonded interfaces. Office of Scientific and Technical Information (OSTI), July 1995. http://dx.doi.org/10.2172/106618.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Liu, Cheng-Hsin, Ha L. Nguyen, and Omar M. Yaghi. Reticular Chemistry and Harvesting Water from Desert Air. AsiaChem Magazine, November 2020. http://dx.doi.org/10.51167/acm00007.

Full text

Abstract:

Although chemists, in general, are concerned with the art and science of constructing molecules and understanding their behavior, for a long time the idea that such molecules can be linked together by strong bonds to make infinite, extended structures were fraught with failure. The notion of using molecular building blocks to make such structures invariably led to chaotic, ill-defined materials and therefore not only defying the chemists’ need to exert their will on the design of matter but also preventing them from deciphering the atomic arrangement of such products. The field remained undeveloped for most of the twentieth century, and it was taken as an article of faith that linking molecules by strong bonds to make extended structures is a “waste of time” because “it doesn’t work.”

APA, Harvard, Vancouver, ISO, and other styles

8

Roach, D., and P. Walkington. Full-Scale Structural and NDI Validation Tests of Bonded Composite Doublers for Commercial Aircraft Applications. Office of Scientific and Technical Information (OSTI), February 1999. http://dx.doi.org/10.2172/4368.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Diebold, Francis, and Canlin Li. Forecasting the Term Structure of Government Bond Yields. Cambridge, MA: National Bureau of Economic Research, October 2003. http://dx.doi.org/10.3386/w10048.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Pribyl, Zachary Jerome. Structural Health Monitoring of Epoxy Bond between Dissimilar Materials. Office of Scientific and Technical Information (OSTI), December 2019. http://dx.doi.org/10.2172/1578015.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!