Dissertations / Theses on the topic 'Bracelets'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 41 dissertations / theses for your research on the topic 'Bracelets.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Dervis, Gulgun. "Archaeometrical Investigation On Some Medieval Period Glass Bracelets." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/2/12607755/index.pdf.
Full textyü
k (Birecik-Sanliurfa) in 2000-20002, a number of glass bracelets were unearthed that belongs to 13th century AD. On going excavations of Mersin Yumuktepe also give quite a lot of 11th-12th centuries Byzantine glass bracelets. In this study a group of those bracelets was started to be examined. After technical drawings, color identification had been carried out by using Munsell color chart. Thin sections of some samples of Mezraa Hö
yü
k have been prepared and then observed by an optical microscope in Mineral Research and Exploration (MTA). Observation of thin sections showed the amorphous structure of glass with some impurities and gas bubbles. On some samples deteriorated surface layers were present. XRD traces of those layers showed the typical amorphous background of glass in which no crystalline phase is present. Elemental analysis of the samples has been done using ICP-OES method in METU Central Laboratory. In the analysis major (except SiO2), minor and some trace elements were determined. ICP-OES data showed that glass bracelet samples studied are of soda-lime-silica glass. But percentage of Na2O is less than expected from typical composition of soda-lime-silica glass
being 10.5 wt % as average. This might be due to removal of Na ions from the glass network because of leaching under burial conditions. Concentration of Al2O3 in the samples of Mezraa Hö
yü
k is almost same. This may be due to the using one type of quartz sand in bracelet production. Color producing elements seem to be Fe, Mn and Cu.
Gagnon, Jean-Philippe. "Colliers et bracelets dont les perles importent peu." Master's thesis, Québec : Université Laval, 2006. http://www.theses.ulaval.ca/2006/23679/23679.pdf.
Full textConus, Thierry. "Conception et optimisation multicritère des échappements libres pour montres-bracelets mécaniques /." [S.l.] : [s.n.], 2007. http://library.epfl.ch/theses/?nr=3806.
Full textDoveri, Giorgio. "Les Bracelets Rouges: proposta di adattamento per sottotitolazione di una serie tv francese." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019. http://amslaurea.unibo.it/18347/.
Full textHérault, Stéphane. "Adaptations du système cardio-vasculaire en microgravité réelle et simulée : influences d'une contre-mesure : les bracelets." Tours, 2000. http://www.theses.fr/2000TOUR3305.
Full textSwift, Ellen. "Regionality in the late Roman west through the study of crossbow brooches, bracelets, beads and belt sets." Thesis, University College London (University of London), 1999. http://discovery.ucl.ac.uk/1317902/.
Full textПриходько-Кононенко, Ірина, Анастасія Четверик, and Єлізавета Полевська. "Дизайн-проектування сучасних жіночих браслетів." Thesis, Київський національний університет технологій та дизайну, 2021. https://er.knutd.edu.ua/handle/123456789/17975.
Full textThe characteristic of the assortment of modern women's bracelets is given. On the basis of theoretical researches the assortment of the specified accessory is systematized. Insufficient level of quality of ergonomic and aesthetic indicators is revealed. The basic model for further development of assortment series of sets with improved quality indicators is singled out.
Leece, Robert Douglas. "Coast Salish mountain goat horn bracelets, evidence of change and continuity in Coast Salish art production and use during the early contact period on the northwest coast of America." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ37410.pdf.
Full textDelrieu, Lidia. "Activité physique dans le cancer du sein métastatique : faisabilité et résultats d’une intervention (études ABLE et MUST) et lien avec la survie (étude StoRM)." Thesis, Lyon, 2018. http://www.theses.fr/2018LYSE1242.
Full textApproximately 5% of patients are diagnosed with metastatic breast cancer each year and 20 to 30% of localized breast cancers become secondarily metastatic. Benefits of physical activity during treatment in patients with localized breast cancer have been widely demonstrated, but the literature is limited in metastatic breast cancer. This thesis work assessed the potential effects of physical activity in patients with metastatic breast cancer through three studies.The StoRM observational study showed an association between the level of physical activity collected by questionnaire with an improvement of survival for HER2 patients. The ABLE intervention study highlighted the feasibility of a physical activity intervention with an activity tracker in this population with an excellent adherence rate (96%), patients' interest and willingness to participate in physical activity programs and functional improvements. The intervention contributed to maintaining quality of life, fatigue and physical activity levels despite treatment and disease progression. Potential biomarkers predictive of tumor progression have been identified. The MUST study showed that the antioxidant SOD and quadriceps isometric extension force appear to prevent sarcopenia and an association between sarcopenia status and toxicity risk was confirmed. This thesis work represents a first step in analyzing the effects of physical activity on patients with metastatic breast cancer. Physical activity appears to be beneficial in this population, but these results need to be confirmed in a larger scale study. These preliminary results highlight the importance of providing appropriate physical activity interventions for patients with metastatic breast cancer at the time of diagnosis in order to maintain an active lifestyle as long as possible
Mengesha, T. (Tewodros). "ICT-based bracelet for early detection of depression." Master's thesis, University of Oulu, 2016. http://urn.fi/URN:NBN:fi:oulu-201605221847.
Full textGarcia, Carmem Barrio. "Recreações e artesanato em aulas de matemática." Universidade Federal de São Carlos, 2015. https://repositorio.ufscar.br/handle/ufscar/7164.
Full textApproved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-09-15T13:35:53Z (GMT) No. of bitstreams: 1 DissCBG.pdf: 7218485 bytes, checksum: 2cf426653054d277b62444205d20b8d9 (MD5)
Approved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-09-15T13:35:59Z (GMT) No. of bitstreams: 1 DissCBG.pdf: 7218485 bytes, checksum: 2cf426653054d277b62444205d20b8d9 (MD5)
Made available in DSpace on 2016-09-15T13:36:07Z (GMT). No. of bitstreams: 1 DissCBG.pdf: 7218485 bytes, checksum: 2cf426653054d277b62444205d20b8d9 (MD5) Previous issue date: 2015-08-24
Não recebi financiamento
From the need to increase the concentration and the interest of students playful method of teaching was applied, by making use of a desire of the students to pro-duce elastic bracelets, introducing through this form of craft concepts of the curriculum of mathematics for the seventh year of basic education and some concepts of financial mathematics which served as reminder of the mathematical operations concepts taught previously. The result was an improvement in the levels of learning, concentration and application on carrying out and completion of the tasks proposed.
A partir da necessidade de aumentar a concentração e o interesse dos alunos por aulas de matemática foi aplicado um método lúdico de ensino, utilizando uma vontade presente nos alunos em confeccionar pulseiras de elástico, introduzindo através dessa forma de artesanato conceitos do currículo de matemática para o sétimo ano do ensino fundamental e alguns conceitos de matemática financeira que serviram como re-cordação dos conceitos de operações matemáticas ensinados anteriormente. O resultado obtido foi uma melhora nos níveis de aprendizado, concentração e aplicação na realização e conclusão das tarefas propostas.
Hammarstedt, Ola. "Fall detection bracelet with an accelerometer and cellular connectivity." Thesis, Uppsala universitet, Signaler och System, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-388502.
Full textGarcía, Mateo Jimena. "Kids' phone : The design of a mobile phone for children from 5 to 11 years old." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Maskinteknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-21204.
Full textDetta projekt har genomförts i samarbete med Tinitell i Stockholm. Syftet med projektet är att ta fram en design på mobiltelefoner anpassade för barn i åldrarna fem till elva år. Frågeställningen som skall besvaras i denna uppsats är ”Hur bör dessa telefoner fungera, och hur bör de se ut?” Målet har varit att ta fram en design som är häftig och innovativ men samtidigt enkel och rolig för barn att använda. Den skall även vara en trygghet för föräldrarna då den möjliggör kommunikation mellan förälder och barn vart som helst, när som helst. Projektet började med en omfattande undersökning bestående av observation av barn som hanterar mobiltelefoner, vilka problem som uppstår och vad man kan utveckla för att tillgodose barns behov, utöver detta genomfördes även tre stora enkäter. Barn i olika åldrar hanterar saker på olika sätt beroende på karaktärsdrag, utveckling och beteende. Baserat på detta faktum togs beslutet i början av arbetsprocessen att dela in användaren i tre olika åldersgrupper. Övergångsåren (5- 6 år), mellanåren (7-9 år) samt yngre ungdomsåren (10-11 år). Utifrån de första skisserna valdes tre olika koncept ut, ett för varje åldersgrupp. Trots att alla tre telefoner har samma grundfunktioner har de, beroende på åldersgrupp, olika extra funktioner och olika utformning för att på bästa möjliga sätt passa slutanvändaren. De tre skisserna presenterades för Mats Horn, grundare av Tinitell. De hade dock räknat med att göra en fast investering och valde därför att fokusera på produktion och design för en av modellerna. För att kunna välja ut ett av koncepten genomfördes en ”value opportunity analysis”, efter att ha tolkat resultaten från denna undersökning valdes koncept två (7-9 år) ut för vidareutveckling. Efter att ha gjort flertalet digitala 3D-modeller och provat många olika idéer nådde jag slutligen mitt mål vad gäller design och funktion för telefonen. Resultatet är Tiniphone, en mobiltelefon med touch-screen utformad som ett armband som barnet kan fästa på armen. Alla funktioner i Tiniphone kontrolleras av föräldrarna via en dator. Detta projekt har genomförts parallellt med Tinitell, som jobbar på en liknande produkt. Jag är väldigt nöjd med slutresultatet och jag hoppas att Tinitell kan använda det material jag framställt som hjälp och inspiration för att hitta en slutdesign för telefonen.
Dambuyant-, Wargny Mathias. "Veiller sur et punir : expériences du bracelet électronique en France, en Belgique et en Suisse." Thesis, Paris, EHESS, 2020. http://www.theses.fr/2020EHES0068.
Full textWhat do we talk when we interested of the penalty of electronic monitoring ? We are of course talking about a way of punishing that is based on a device (a bracelet and a case) but also professionnals (monitoring and support). We are also talking about a porter who will experience, during his sentence, an unprecedented measure. This resaerch is already in a few lines, at the crossroads between the sociology of experience and that of deviance and punitive theory. Theses and authors wil be mobilized throughout this thesis. I would also call, in more detail, on the sociology of the body in the analysis of the condemned people and on the sociology of work in the analysis of professionals. This thesis aims to treat the subject of electronic monitoring as a total experience. This punishment is fully inscribed in the life of the individual and includes, in its entirety, the carriers as well as the professionals who supervise them. This thesis will be based on an international perspective : it ompares fields carried out in France, Belgium and Switzerland. In these three countries, the uses and representations of the elctronic monitoring are different in terms of audiences as well as social representations. All of the fieldwork enabled us to carry out, between 2015 and 2019, around 130 interviews with professionals, 54 interviews with carriers, as well as observations in the various surveillance centers of the three countries. In terms of advances in this research, yhey mainly take two directions : Concerning the carriers, we have redefined the penalty as a set of constraints (real and supposed, planed and unforeseen). The electronic monitoring sentence is the combination of a body constraint (the stigma) and a space time constraint (partial confinement in the wearer’s home). These two constraints, of body and space time, redefine punishment as being mainly focused on the identity of the wearer. The different pillars of identity (which define the individual as such) are thus redefined and transformed by pain in chapters which successively address the body, space, time use, social relations, clothing practices and sports, etc. For the main workforce in ou sample, there appears to be a real « self punishment », a punishment relating to identity and involving many influences in both feelings and practices. At the same time, there are multiple ways of partially or totally reversing the penalty in order to make it an opportunity. A new collective relationship also appears which makes it possible to face up to grief in a group : this is what we call « the self made group », the group which is formed in the face of adversity and which makes it possible to overcome it. Regarding professionals, we can see that the electronic monitoring is redifining the border that existed between monitoring and support practices. The two main professional branches that oversee the measure are those of prison guards and prison integration and probation counselors. For these two branches, the application of the measure doesn’t take place without a profound rebalancing of their practices, leading, for some, to social monitoring, and for others, forced support. The study of their practices in situations also brings to light a certain number of common or even similar sensitivities : managements which limit or on the contrary perforate according to the cases, the potentialities of electronic surveillance. In this sentence based on new technology, the human remains essential
Almgren, David, and Hussam Alshammari. "SmartBand Alert : Ett armband för säkerhet." Thesis, Högskolan i Halmstad, Akademin för informationsteknologi, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-34177.
Full textBrunet, Lucie. "Etude ergonomique de la modalité haptique comme soutien à l’activité de déplacement piéton urbain : un projet de conception de produit innovant." Thesis, Paris 11, 2014. http://www.theses.fr/2014PA113009/document.
Full textWhether they are occasional or regular travellers, the pedestrians travelling in an urban environment and using public transportation have to face the complexity of the transportation network of large cities. The travelling aids are numerous and varied. They can be stationary or mobile (for example, applications on smartphones). These aids rely mainly on the visual sensory modality, already heavily requested during urban travel. An interesting alternative would be to use haptics (sense of touch). Indeed, this modality enables to convey travel and navigational information to the owner of a haptic device, by drawing discreetly his attention with tactile messages. Joining an approach of prospective ergonomics, this thesis aims to study the contribution of the haptic modality as a support for the activity of urban pedestrian travel. The applied objective is the design of a haptic device as an innovative travel aid, effective and accepted by the future users. This design project took place within the framework of the ANR project Tictact, led by the CEA-LIST from 2011 till 2014. The use of the haptic modality being put as an initial bias, the objective of the project was to determine the form that the assistance and the technology of the travel aid should take.To tackle this challenge, we conducted three successive studies. The first one, aimed at understanding the elementary cognitive activities mobilized when consulting information necessary to the pedestrian navigation. For that purpose, we analysed the behaviour of a pedestrian undertaking an urban travel (in the subway and on foot). The results allowed us to specify the functions that a future device assisting in the travel should include. Completed by a review of the literature on haptic interfaces and their use for assisting travel, these results led us to determine the eligible functions of the haptic modality.The second study aimed at designing the haptic interaction with the haptic interface, in two stages: first develop the concept of the interface and second design the interaction language. An approach of participative design was implemented, supported by the use of a device prototype and creative methods. This approach succeeded in: i) identifying an informative message suitable for each function of the travel; ii) translating this message (using an analogy) into a metaphor; and iii) transforming every metaphor into vibrotactile patterns delivered by a haptic wristband.The third study aimed at evaluating the haptic device (a wristband coupled with a Smartphone) in a real environment. An analysis of the activity of urban travel was conducted, comparing a group having a prototype of our haptic assistant to a group without such prototype. The results confirm the potentiality of the haptic modality to improve the travel performance in particular to enable a more fluid speed of travel and a decrease in the consultation time of an information medium. Our study opens up perspectives for the use of the haptic modality in diverse mobile interfaces (for example a smartwatch)
Medeiros, Rainelly Cunha de. "Variedades Involutivas e Aplicações Enumerativas." Universidade Federal da Paraíba, 2012. http://tede.biblioteca.ufpb.br:8080/handle/tede/7411.
Full textCoordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES
In this work are introduced the concepts of involutive affine and projective varieties. Taking into account that every projective variety in P2n-1 has dimension greater than or equal to n-1 and that every hypersurface is involutive, we put our focus on the study of involutive curves in P3, noting that a curve in P3 contained in a plane will be involutive if and only if it is a union of lines passing through the point associated to the suported by plane the correspondence between points and planes determined by the standard symplectic form in P3. We started using the Poisson bracelete invariance of the definition ideal of a varity criterion to determine the involutive lines and conics in P3. Moreover, we exhibit a family of involutive twisted curves. Finally, having in mind that the parameters spaces for involutive lines and conics are 3 and 5 dimensional spaces, respectively. We find how many involutive lines and conic meet 3 and 5 given lines in P3, respectively.
Neste trabalho são introduzidos os conceitos de variedades involutiva afim e projetiva. Tendo em consideração que toda variedade projetiva em P2n-1 tem dimensão maior ou igual a n-1 e que toda hipersuperfície é involutiva, colocamos nosso foco no estudo das curvas involutivas em P3, destacando que uma curva em P3 contida em um plano será involutiva se, e somente, se for uma união de retas passando pelo ponto associado ao plano suporte, pela correspondência entre planos e pontos determinada pela forma simplética padrão em P3. Começamos utilizando o critério da invariância do ideal de definição da variedade sob o colchete de Poisson para determinar as retas e cônicas involutivas em P3. Em seguida, exibimos famílias de cúbicas reversas involutivas. Finalmente, tendo em consideração que os espaços de parâmetros determinados para retas e cônicas involutivas tem dimensão 3 e 5, respectivamente, discutimos o problema de determinar quantas retas (resp. cônicas) involutivas encontram simultaneamente 3 (resp. 5) retas dadas em P3.
Stašek, Filip. "Aplikácia princípov a technológií telemedicíny v oblasti životného poistenia." Master's thesis, Vysoká škola ekonomická v Praze, 2017. http://www.nusl.cz/ntk/nusl-358950.
Full textShou, Virginia. "WHAT?: Visual Interpretations of the Miscommunication Between the Hearing and Deaf." VCU Scholars Compass, 2013. http://scholarscompass.vcu.edu/etd/3125.
Full textDias, Wilson da Silva. "A MONITORAÇÃO ELETRÔNICA NA EXECUÇÃO PENAL: CONTROLE E REINSERÇÃO SOCIAL." Pontifícia Universidade Católica de Goiás, 2015. http://localhost:8080/tede/handle/tede/3444.
Full textMade available in DSpace on 2016-09-02T12:56:45Z (GMT). No. of bitstreams: 1 WILSON DA SILVA DIAS.pdf: 3554411 bytes, checksum: dbc50ad9f47e3d8a3f15a56399d5af5c (MD5) Previous issue date: 2015-04-07
This dissertation deals with systems, prison systems and the control and efficiency of electronic monitoring in the enforcement of sentences. It seeks to prove that despite the progressive system in the execution of the sentence in Brazil to present itself as a set of principles and rules that aim to achieve retributive nature of the punishment of more human way through social reintegration, is primarily reinforcing the control of the bodies submitted to serve their sentences. In turn, the alternative and technological means of indirect monitoring, based on the electronic monitoring has been used as a mechanism or control gear, while despises the parallel implementation of social inclusion policies and therefore humanity of the convict. In order to confirm this hypothesis, the research is based on disciplinary power reference in the kidnapping of institutions, in particular in prison and electronic monitoring system from the way the criminal agencies even react to the condemned as machinery or gear maintenance of relations of power and control over the convicts. Through national and foreign literature, as well as the assessment of administrative and legal documents relating to criminal enforcement, analysis of the reality of electronic monitoring in Brazil and especially in Goiás, objective reinforce that finding, to expose the grounds of implementation of that electronic gear - in Goiás through electronic anklets - although a less painful form of surveillance and punishment than the classic system embodied in prisons, have the urge or the time control objective and actions of inmates who are not oportunizado social inclusion policies even the most traditional and basic shapes, namely, education, work, medical and psychological care.
Esta dissertação trata dos sistemas, regimes prisionais, controle e da eficiência da monitoração eletrônica na execução das penas, buscando demonstrar, que apesar do sistema progressivo na execução da pena no Brasil se apresentar como um conjunto de princípios e regras que objetivam alcançar a natureza retributiva da pena de modo mais humano por meio da reintegração social, primordialmente vem reforçando o controle dos corpos submetidos ao cumprimento de penas. O meio alternativo e tecnológico de vigilância indireta, consubstanciada na monitoração eletrônica tem sido utilizada como mecanismo ou engrenagem de controle, enquanto despreza a implantação paralela de políticas de inserção social e, consequentemente, a humanidade do apenado. Com o intuito de comprovar essa hipótese, a pesquisa se apoia na referência do poder disciplinar nas instituições de sequestro, em especial no sistema prisional e de monitoramento eletrônico a partir da forma como as agências penais reagem diante do condenado até mesmo como maquinarias ou engrenagens de manutenção das relações de poder e controle sobre os apenados. Por meio de pesquisa bibliográfica nacional e estrangeira, bem como pela apreciação de documentos administrativos e judiciais referentes a execução penal, a análise da realidade da monitoração eletrônica no Brasil e, especialmente em Goiás, objetiva reforçar aquela constatação, ao expor que a razão da implantação daquela engrenagem eletrônica – no estado, por tornozeleiras eletrônicas – embora uma forma menos dolorosa de vigilância e punição do que o sistema clássico consubstanciado nas prisões, tem o impulso ou o objetivo de controle do tempo e das ações dos apenados a quem não é oportunizado políticas de inclusão social, ainda que pelas formas mais tradicionais e básicas, quais sejam, educação, trabalho e atendimento médico-psicológico.
Palhares, Cinthia Rodrigues Menescal. "Cada pena a seu tempo: o monitoramento eletrônico como sanção no Direito Penal brasileiro." Universidade do Estado do Rio de Janeiro, 2013. http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=6897.
Full textThe objective of the present dissertation is to investigate the legitimacy of adopting electronic monitoring as a stand alone sanction in the Brazilian system of criminal justice. The concept of formal social control in the context of technological risk societies, of which detention and monitoring are intrinsic parts, allows a parallel to be drawn between the penalties adopted throughout the evolution of society and the development of the Criminal justice system. This dissertation analyzes the concept of electronic monitoring of detainees, the origins of this practice, and its types, technological evolution, purposes, models and constitutional aspects in Brazil as well as in other countries. Based on a critical analysis of the normative aspects of electronic monitoring at the federal and state levels, proposals are formulated in order to safeguard individual rights while ensuring the suitability of the system as a type of criminal sanction in keeping with the preventive and retributive purposes of justice. The potential presented by this type of sanction as a means to reduce prison overpopulation in Brazil must not however be overlooked.
-SHENG, LIN HSIANG, and 林祥生. "Impact of customers’ involvement, point of view, and loyalty on smart bracelets." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/76567429208046037040.
Full text東南科技大學
工業管理研究所
104
The purpose of the study is to explore the impact of customers’ involvement, point of view, and loyalty on smart bracelets. The questionnaire data and the analysis were processed by structural and regression equations. According to the results of questionnaire analysis, it’s shown that 8 of 9 SEM hypotheses and 9 of 10 regression analyzing hypotheses are consistent with the research consumptions. The results showed that customers appreciate the value of health and are willing to try new healthy products such as smart bracelets. A good-quality product attracts customers’ purchasing its product series and gaining their loyalty. Thus, the customers’ related feeling of value will be established. In addition, customers’ consuming behaviors will be influenced by their subjective opinions and brand cognitions. For a creditable, flawless, and durable brand, customers’ satisfactions will be converted to their loyalty. After their loyal consuming behaviors are formed, their loyalty will be established too. Moreover, the customer involvements are affected by outside information, so that their thoughts can be changed by practical point of view. Finally, the research proposes that, if a smart bracelet can show the speakers’ image when making phone call to a smartphone, it can enhance the security of elders and general people. Keyword: Involvement
Yeh, Pei-Ling, and 葉培翎. "Using TAM to Discuss on Wearable Device-Taking an Issue of Smart Bracelets as Example." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/4346uc.
Full text國立暨南國際大學
國際企業學系
106
People become aware of the importance of health. In the pace of the progress of the technology, people gradually assist them to exercise with wearable devices. For instance, when wearing the smart bracelet such as fitness trackers, in addition to increasing effectiveness and efficiency in the process of exercise, people get their physical data immediately and prevent themselves from sports injuries. In the research, we will apply the technology acceptance model to smart bracelets Moov Now. The theories are emphasized to discuss the Davis’ (1989) technology acceptance model and the follow-up study that is Ventesh and Bala’s (2008) technology acceptance model three. First, the research structure is based on the TAM (Davis, 1989) and we use the variables from the TAM3 (Ventesh and Bala,2008) to discuss which will influence the perceived usefulness and perceived ease of use respectively to prove the hypotheses applied to Moov Now. Second, the collection of questionnaires are used in the study. We will focus on people who realize the importance of health issues and have heard smart bracelets before. It helps us to understand the people's acceptance of the smart bracelets with the data of the questionnaires. We collect 235 questionnaires and use SPSS 23 for statistical analysis, and the hypotheses are tested by the regression analysis in the research. The results of the study are as follows. First, the perceived ease of use positively influences perceived usefulness. Second, both the perceived usefulness and perceived ease of use are positively related to attitude. Third, both attitude and perceived use-fulness positively correlate with the behavior intention. Fourth, except for job relevance and result demonstrability, image and output quality will positively correlate with the perceived usefulness. Besides, except for the computer anxiety, computer self-efficacy and computer playfulness will positively correlate with perceived ease of use. As a result, from the result of the analysis, we will accurately estimate the customers’ characteristics and know the degree of technology acceptance in order to design and modify the appropriate technological products in the future.
Jhang, Jhih-Ren, and 張智任. "Applications of Creative Design、3D Printer and Multi-axial Machining to Metal and Non-Mental Bracelets." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/23hrb2.
Full text正修科技大學
機電工程研究所
103
Jewelry design is as the core element, it can set off beauty of gems. Jewelry design is also focus of casting and processing. Due to the irregular surface appearance simple surfaces of jewelry, so design, casting and multi-axis machining of jewelry are difficulty. The objective of this study is jewelry rings, beads and bracelets designed by 3D printing, casting and machining of multi-axis tool paths planning. The software design use the Rhino Gold finished product 3D printing, rings, beaded design to silicon mold casting as the main direction. The bracelets is also designed to establish import NX entity and generate toolpaths, VERICUT through entity after cutting simulation software simulation is correct, the use of five-axis machining machined entities. This thesis is studying methods and techniques, discuss how to apply Rhino Gold design software and multi-axis machining technology for jewelry making diversification.
Simões, Tiago Miguel Delgadinho. "Life Bracelet." Master's thesis, 2019. https://hdl.handle.net/10216/122460.
Full textSimões, Tiago Miguel Delgadinho. "Life Bracelet." Dissertação, 2019. https://hdl.handle.net/10216/122460.
Full textKrejčiříková, Karolina. "Římský šperk a jeho zobrazení na památkách zaalpských provincií." Master's thesis, 2014. http://www.nusl.cz/ntk/nusl-339180.
Full textChao, Chih-Hsiang, and 趙志翔. "Monitoring Electrocardiographic at Home Using a Wearable Bracelet." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/q353pw.
Full text元智大學
資訊管理學系
104
The main purpose of this study was to develop a mobile application to record electrocardiogram (ECG) with Phyode WMe smart health bracelet.. Therefore, the users can measure electrocardiogram at any time and without location restrictions. This system used Bluetooth and Wi-Fi transmission technologies to capture and transmit ECG raw data via wireless network, the users can track ECG records and grasp health status. As compared to traditional hand-held ECG devices, this bracelet-based ECG measurement system is more convenient and effective on the application of mobile ECG measurement.
Ko-Ping, Huang, and 黃克平. "Bracelet Designs with Radio Frequency Identification for Metro Rapid Transit." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/26106643158814202322.
Full text華梵大學
工業設計學系碩士班
102
The RFID is regarded as a low-cost one capable of increasing efficiency, which has an application range covering related areas such as commercial trade, distribution process, human identity recognition, micro-payment and manufacturing. The Taiwan EasyCard uses the RFID identification technology wherein users should first take out the proximity cards from their wallets or other protective containers, then they place the cards on the sensor area, which is not convenient. The purpose of this study is to put forward a bracelet design of the RFID, so as to improve the above inconvenience. This study first uses an observation method to analyze and explore the practical application of the existing RFID products and to learn the users’ operating modes and wrist wearing habits. Users’ needs are gathered through interviews, and functional prototypes are made to take simulation and search undiscovered and uncertain factors thereof aiming at functions. This study takes the MRT Station in Taipei as the main observation site, with a sample size of 1092 persons, including three types: students, office workers and ordinary citizens. The results show that the females prefer colorful identification protection cards or the ones in different styles, prioritizing uniqueness and aesthetics; over 51% of the sample has habits of wearing hand accessories, with the males accustomed to wearing watches, while the females preferring to wear accessories. The interviewed users think that the wrist is regarded as an important area for accessorizing. This study puts forward a design specification of the Radio Frequency Identification: 1. it must have waterproof features, and the wafer and antenna group must be waterproof. The bracelet should be provided with a mechanism making it adjustable (in terms of size). 2. There should be no metal material structure covering the FRID wafer. 3. It should be able to withstand too many hand and bodily motions, and sense when users are conducting the sensor action/operation through the most natural way. 4. it should be easy to wear and can be fixed on the wrist. 5. it takes accessorizing as a design direction. The study puts forwards a conceptual design provided with a magnetic fastening bracelet made according to the above design specifications. The study finally gets the result matching the design spcifications by being tested from six users.
Chen, Chih-Hsin, and 陳之信. "The Comfort Assessment Study on the Smart Bracelet of Rubber Materials." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/21590120477104445239.
Full text國立臺灣科技大學
設計研究所
104
Duo to the technology maturity of wearable device, it has began to merge in our daily life. More and more users used smart band to track information, such as movement, steps, and heart rate. How to choose a right smart band for personal style, and wear it for a long time is an important consideration. The purpose of this study is to apply a wide range of applications regarding smart band rubber materials to help investigate users’ subjective comfort feelings. The generated results of the study are: (1) High elastic soft rubber materials have good subjective feelings in terms of convenience and comfort of use. (2) A hard coefficient of rubber can give users uncomfortable feelings, and, on the other hand, a soft coefficient of rubber feels more comfortable. (3) User's preferences for product appearance and material comfort provides indirect impact on the willingness to wear. Users feel that the products appearance is much important than the product materials affecting comfort feels.
Chen, Kuan-lin, and 陳冠霖. "TOUCH bracelet: An Application of Wireless Aware Service on Matching-System." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/63180724457195490374.
Full text南台科技大學
多媒體與電腦娛樂科學系
98
Due to the advantages of the scientific technology, the communication among human beings has been transferred from oral discourse and physical gestures to the means of electrical signals and digital messages. This leads to a more convenient distant communication; nevertheless, the frequencies of face-to-face communication have declined and relationship interflow has also been simplified. Improving the drawbacks of the digital communication, the concept of Aware Service has been conducted in this study to investigate the means of how to provide necessary services in the given set. The purpose of this research is to facilitate users of wireless transmission devices to match up and to provide a channel of further short distance communications. Enhancing the dimension of social interactions, Aware Service and Zigbee, a low-power, short distance and wireless transmission technology, have been adopted to develop a wireless sensor matching system – TOUCH. Via this system, users can be matched up by wearing TOUCH wrist band in which their personal profiles and interests had been transferred to wireless digital signals and by which these messages can be sent out through multicasting. Once successful pairings exit, repeating of glittering and intensity of the vibration on the band would lead both users to have vis-à-vis interaction. The recuperation of lacking in-person interaction then will be established, which would increase the opportunities of mutual communication. The design of TOUCH is appropriate for wireless transmission and portable wear so that time and place restraint is free. Users can unintentionally discover people having the same habits anywhere anytime and would not miss any feasible friendship.
Wu, Ming-Ying, and 吳明穎. "A smart bracelet: to improve the interactions between performer and audience." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/27044481917652394695.
Full text大同大學
工業設計學系(所)
104
There has performing arts since people appeared.(Li, 2001) Over time, different performing types and theater forms have been developed. Such changes indicate close relationship between performing arts and social structure, cultural background, and technology. With current computational technology development, the application of interactive technology to performing arts gradually emerges. For example, Anarchy Dance Theatre & Ultra Combos applied projection technology for dance movement to show the performers’ walking locus and flow. Huang ’s (2013) work “Huang Yi & KUKA” showcased how to dance harmoniously with robotic arm. SIRO-A, a Japan team, used stage property and projection changes to make a diversity of visual representations. Interactions between computational technology and performing arts can enhance audiences’ visual, acoustic and tactile experiences compared to traditional performing arts. In the future, performing arts will incorporate more technological changes (Chen & Lin, 2008). However, for most performing arts to date, performers tend to express performing contents to the audiences. Because of “forth wall” (Hage, 1993) which is the conception of performance, the relationship of performer and audiences had be cut. Performers are not able to get feedback from the audiences simultaneously. The challenge of this research is how to provide a better relationship between the performers and audience that will not affect the show? The goal of this research is therefore to demonstrate a new interactive interface to enhance the interactions between performers and audiences. This new interface provides audiences’ feeling to performers by using computational technology. We designed a smart bracelet to detect physiological reaction (ex: galvanic skin response) of audience, which then immediately transmits to staffs on the stage. When most audiences have the same physiological reaction to a certain move on the stage, the stage scenery would change its pattern or color to let performers know how the audiences feel. Performers would enhance self-confidence and then incorporate the audiences’ feedback to create their future performance. This study is divided into the following steps: In the first step, the emotions that are most likely to be felt by an audience while watching a performance are identified. The physiological signals that could sense the emotions were selected and used to detect the emotional indicator. The second step involved conducting preliminary experiments in order to examine the accuracy of the signals in detecting the emotional indicator. The third step comprised the creation of a system prototype and testing of its internal system and the operation of its circuit architecture. The feasibility of the system was tested using situational exercises. Further, by examining the shortcomings of the system, directions for future improvements were established. By using the smart wristband system, our study confirms that the application of digital technology can increase the entertainment value of performing arts and enhance the lifelike quality of performances. Since the study was conducted based on the system prototype, the effectiveness of the smart wristband and accuracy of the physiological signals require further improvement. This study aims to apply the smart wristband system to verify that digital technology can enhance the confidence of performers and diversity of performances, thereby providing a new performing arts interface between the performers and audience.
Teng, Hung-Chou, and 鄧宏洲. "Applying Deep Learning for Sentiment Analysis on Word of Mouth of Smart Bracelet." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/2d94uu.
Full text淡江大學
資訊管理學系碩士在職專班
105
The rise of social networking, many consumers are willing to discuss in the community media to share, express their views on the product. Enterprises can analyze the consumers'' preferences and advantages and disadvantages of the various products on the market through a large number of online reviews, but in the past the literature is less applied to the Deep Learning in the Sentiment Analysis of Chinese comments. The contribution of this thesis is to construct a sentiment dictionary which belongs to the field of Smart Bracelet. And applying Deep Learning and Recursive Neural Network Long Short Memory technology in the Smart Bracelet word of mouth Sentiment Analysis. And compared with the results of Naïve Bayes algorithm and Support Vector Machine. The experimental results show that the correct rate of Naïve Bayes algorithm is 70.67%, the Support Vector Machine is 66.01%, and Deep Learning is 89.94%. So as to prove Deep Learning in the Sentiment Analysis of the most effective prediction.
Fan, Chia-Chun, and 范家郡. "A study on the purchasing intentions of the Intelligent bracelet based on AHP." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/pzr55q.
Full text國立屏東科技大學
資訊管理系所
106
As technology being advancing as time goes by, and people's lives are constantly keeping changing. From the Very Large Scale Integration(VLSI), personal computers, Personal Digital Assistants (PDAs), Feature phones to Smartphones, all consumer electronics are moving toward lightweight, versatile and mobile. At the annual Consumer Electronics Show in the United States in 2013, the rise of wearable devices has led the way for the future of consumer electronics products. In the wearable devices, the best sales are the smart bracelets which accounted together with smart phones as much as 90% in the market. This research report explores the purchasing factors of consumer products from the viewpoint of consumers. To collect literature review and expert questionnaire methods, and then summarizes the four important aspects of the purchase of smart bracelets in order of "Functional Value", "Social Value" , "Epistemic Value", "Conditional Value" . According to the results of the questionnaire, and then by the level of analysis, calculate the key consumer factors after the weight of consumers, and preferences. The study found that the main factor influencing consumers' purchase of smart bracelets is the most important in the main structure of "Functional Value", followed by "Epistemic Value" and "Conditional Value"; the index items are "Price", "Practicality" and "Appearance" being the most important, while "Public Sources", "Symbolic value" and "Reference group" are the less influential factors in the project. The results of the study provide the future production and management of the reference policy for sellers selling smart bracelet products.
LIAO, JIA-XIN, and 廖家芯. "The Study of Happiness of College Students with Mobile Devices Bracelet and Happiness Scale." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/933e4e.
Full text國立雲林科技大學
工業工程與管理系
107
Wearable device technology development, and more popular. Not only convenience but also control own physical condition, so with the help of Wearable bracelet to collect physiological values, combined with the subjective happiness scale to find out the happy situation of college students and master's. The main research object of this study is college students , using the Happy Scale to measure the student's happy score, and takes into account the living background variables that may affect happiness and wearable devices collect college students of physiological values, add the experimental design to measure, using the decision tree to establish a happy rule. Descriptive statistics to explore the relationship between the happy situation and the background variables, and ultimately will explore the happy situation of higher education students to give unhappy students appropriate advice.
YEH, TSUNG-HUA, and 葉宗樺. "A Study of Consumer’s Adoption Intention for Smart Bracelet-The Application of the UTAUT2 Model." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/ppt33e.
Full text國立臺北大學
企業管理學系碩士在職專班
105
In recent years, progresses in the area of medial have extended human life. Along with this development, more and more Taiwanese people raise the concerned about health issues. Moreover, as more wearable device with sophisticated technology has entered people’s households and daily lives, a new life style combining with the Internet of Things (IOT) and cloud platform becomes a reality. In this new life style, a smart bracelet is an excellent representation of such portable device. Therefore, the purpose of this study is to apply the Unified Theory of Acceptance & Use of Technology Extended (UTAUT2) to explore the key factors that influence consumers’ willingness in using a smart bracelet . In this empirical analysis, data collection takes the form of convenience sampling. Surveys were sent to average consumers, yielding a total of 200 valid questionnaires. Then SPSS and LISREL software were used to conduct statistical analysis and follow-up discussion. The results of the survey data confirmed the following: In the integrated technology acceptance model, "Performance Expectancy,” "Effort Expectancy,” and "Hedonic Motivation" have a significant positive impact on consumers' willingness in using the smart bracelet. The overall reliability value (α value) of the study results is .975, which indicates that the reliability of the questionnaire is good, with high internal consistency. The research hopes to help the relevant manufacturers and medical care institutions to determine the direction of the relevant products and more scholars to study and assist the future medical improvement and quality of care.
McLellan, Karyn Anne. "Periodic Coefficients and Random Fibonacci Sequences." 2012. http://hdl.handle.net/10222/15381.
Full textSHEN, CHIH-CHUN, and 沈志君. "A Study on the Motivation and Satisfaction of Wearable Exercise Bracelet in the High Grade Students of Elementary School - A Case Study inTainan." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/2udw23.
Full text康寧大學
數位應用研究所
106
Exercise is one of the best ways to promote health.,A healthy body and mind, will have a good quality of life and harmonious interpersonal relationship. In the past, it was not easy to find out if the physical activity or physiological values of each day were not easily measured. Now, as a result of information technology progress and development, and technology has always come from the human needs, the external type of lightweight, easy to use wearable technology thus produced. It is the most suitable for people to use the habit of wearable exercise bracelet, but also by everyone's acceptance and love, is currently the highest use of wearable technology. Nowadays, many students are wearing the wearable device in the campus of the country. The situation of the actual use by students, and the motivation and satisfaction after using are worth exploring. This study mainly discusses the students in the high grade of elementary school about the situation of movement motivation and use satisfaction of wearing wearable exercise bracelet, studies the methods of literature exploration and questionnaire survey as the main research method, carries on the analysis, and concludes as follows :(1) the students wear wearable exercise device in the use of the situation in the cumulative daily exercise time of 30 minutes to an hour is the maximum number of users;(2) in terms of motivation factors, the highest motivation for exercising is more than two hours per day;(3) in the use of satisfaction, the highest degree of satisfaction is in the use of a school with 49 classes or more students;(4) the use of wear-type exercise bracelet is highly correlated with satisfaction and sports motivation.
CHAN, YUNG-CHENG, and 詹詠誠. "The Study on Intention of Using Heart Rate Detection Bracelet through Integration of Theory of Technology Readiness and Acceptance and Theory of Planned Behavior." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/54u366.
Full text大仁科技大學
休閒事業管理研究所
106
The purpose of this study was to investigate the technological readiness, perceived ease of use, perceived usefulness, satisfaction, subjective norm, perceived behavioral control of the general user of heart rate detection bracelets and the influence of satisfaction structure on continuance intention. This study was investigated and measured by the way of network questionnaire, take the way of convenience sampling, SPSS 20.0 and Smart PLS 2 software are used to analyze and process the questionnaire data. The findings of this research found that: (I) Technology readiness had a significant impact on perceived usefulness, perceived ease of use and satisfaction; (II) Perceived ease of use had a significant impact on perceived usefulness and satisfaction; (III) Perceived usefulness had a significant impact on satisfaction; (IV)Satisfaction, perceived usefulness, and perceived ease of use had a significantly affect continuance intention. (V)Subjective norm did not have a significantly affect continuance intention(VI)Perceived behavioral control had a significantly affect continuance intention. Finally, According to the results of the research data, the author puts forward some specific suggestions on the four dimensions of the technology readiness, perceived ease of use, perceived usefulness, and perceived behavioral control ,provide a reference for future equipment manufacturers for further development. In recent years, the concept of healthy living has become a national sport, the pursuit of a healthy diet and exercise has become the only proper course to take, coupled with the rapid progress of science and technology, along with the smart wearable device, the movement to keep abreast of your physical condition was booming. According to the national health service of the ministry of health and welfare, different physical qualities correspond to heart rate and exercise intensity, Therefore, the heart rate monitor watches provide user movements the Early stage, metaphase, and later stage of the body message through the heart rate, timely feedback on exercise intensity, to achieve the purpose of sports health, lose fat and body sculpting.
FIŠEROVÁ, Petra. "Trest domácího vězení jako forma nápravy pachatele." Master's thesis, 2010. http://www.nusl.cz/ntk/nusl-80285.
Full textSchoeman, Martha Anna. "Enhancing comprehension in open distance learning computer programming education with visualization." Thesis, 2015. http://hdl.handle.net/10500/20715.
Full textComputer Science
D. Phil. (Computer Science)