Dissertations / Theses on the topic 'Bredasdorp'

Bibliography: leaves 113-120.
The purpose of this study is to ascertain the effects of the Overberg Test and Evaluation Facility on a rural town. Bredasdorp, the town in question, up until the announcement of the proposed Overberg Test and Evaluation Facility had developed historically on the basis of the natural needs and requirements of a rural community. Bredasdorp thus, provided services and facilities for its and the surrounding population as a natural growth point and service-centre for complimentary economic activities - mainly of an agricultural nature. The introduction of the Overberg Test and Evaluation Facility impacted on the functioning of this local farming community. This study traces this social change on the various systems operating in the community. Specifically, this study looks on the areas of economic and social change as a result of demographic change in a community. It was hoped that the introduction of the Overberg Test and Evaluation Facility would have long-term influences on the character, make-up and functioning of Bredasdorp as a rural town. In-depth interviews were held with 30 old and new inhabitants of Bredasdorp to determine their attitudes with regard to the project as primary data. Documents such as census reports, Municipal and town planning reports, education related statistics, the Hey Committe report as well as official documents from Armscor were utilized for secondary data. Findings indicate that Bredasdorp experienced a demographic growth as a result of the introduction of the Overberg Test and Evaluation Facility. This demographic growth had a trickle-down effect on the infrastructure such as water reticulation, sewerage, housing, schools, business and community facilities. Adjustments were made by the various systems involved in the change process in order to accommodate the demographic change positively. The economic/militaristic development project at Bredasdorp can be seen as a positive influence on Bredasdorp and environs.

Magister Scientiae - MSc (Earth Science)
Studies have shown that ecosystem services that are provided by wetlands are beneficial to the improvement of water quality regulation. Some of these ecosystem services may include sequestration of sediment, toxicants and nutrients by wetlands, which contributes to the quality of water in rivers downstream and thereby, the health and well-being of humanity and the environment. However, studies have also shown that there has been insufficient research done on how natural wetlands regulate water quality. Therefore, this study investigated the regulation of water quality by a wetland located in an agricultural setting in the Western Cape. This type of research was essential to South Africa as the country is experiencing a great loss and degradation of wetlands, even though national policies and legislation are geared towards their protection and rehabilitation. The study was aimed at evaluating the assumption that wetlands improve the quality of water in river systems, using the Karsriviervlei as a case study and by invoking two objectives. The first objective was to investigate the spatial and temporal variation in selected water quality variables upstream, through the wetland and downstream. The second objective was to investigate the hydrogeomorphic characteristics and processes of the Karsriviervlei that determined the effectiveness of wetlands, in regulating water quality. Furthermore, the study also consisted of two methods that provided an understanding of how natural wetlands regulate water quality.

This research was aimed at employing the broad use of petrophysical analysis and reservoir modelling techniques to explore the petroleum resources in the sandstone units of deep marine play in the Bredasdorp Basin.

Bibliography: pages 180-197.
The Cainozoic Bredasdorp sediments along the south coast of the Cape Province, South Africa, have come under investigation through a few intermittent studies undertaken since the early part of the century. In this presentation the literature is reviewed and a stratigraphic subdivision, based on both lithostratigraphic and biostratigraphic principles, is applied to the sediments of the Bredasdorp Group. The Bredasdorp deposits can be classified, according to origin, as shallow marine and aeolian. The marine deposits are subdivided into the Pliocene De Hoopvlei and the Middle to Late Pleistocene Klein Brak Formations. The Late Pliocene to Early Pleistocene Wankoe Formation, the Late Pleistocene Waenhuiskrans Formation and the Holocene Strandveld Formation constitute the coastal aeolian deposits. These marine and marine-related (aeolian) formations, characterised by calcareous elastics have been grouped together in a newly defined Bredasdorp Group. In order to construct a depositional model for the Bredasdorp Group, various facies have been identified on the basis of geometry, lithology, fossil contents, palaeocurrent data, biogenic and sedimentary structures. The facies are related to environments constituting a shoreline setting with offshore, transitional, shoreface, foreshore and backshore zones, followed by back-barrier lagoons, estuaries, backshore dunes and coastal dunefields associated with transgressive/regressive shorelines. The various deposits, as well as distinctive geomorphological features, are correlated with the relative sea-level movements throughout the Cainozoic, which have shaped the southern Cape coastal plain. Sea-level curves for Southern Africa, drawn by several authors are compared. A relative sea-level curve is constructed for the south coast of South Africa. Several Early Cainozoic transgression/ regression cycles are recognised at places along the South African coast. The earliest cycle started in the Palaeocene and was followed by a less pronounced transgression/regression cycle occurring in the Late Eocene to Early Oligocene. Remnants of surfaces related to these cycles are recognised in the Southern Cape Province, but these are interpreted as products of subaerial processes. The next cycle, reaching a transgressive maximum of c. 180m, started in the Miocene and terminated in the Early Pliocene. Again, no evidence of marine deposits is preserved on this marine-planed surface. The Early Pliocene transgression reached a maximum present-day elevation of c. 120m. Marine planation of the coastal platform took place during the transgression, whereas the De Hoopvlei Formation situated below 120m, was deposited during the subsequent Late Pliocene regression. The Wankoe Formation was deposited during the same regression as backshore dunes and coastal dunefields. During the Quaternary transgression/regression cycles, of which at least three are indicated, the transgression reaching a maximum of about 50m, in places eroded part of the Neogene Bredasdorp Group. The Klein Brak Formation (preserved below 20m) was deposited during Middle to Late Pleistocene regressions. The Waenhuiskrans Formation, which is extensively developed on the present-day continental shelf, was deposited during this regression with sea-level receding to about -130m below present sea-level. The aeolian Strandveld Formation, which is still being deposited, originated from the Flandrian transgressive maximum at the start of the Holocene.

Masters of Science
The Bredasdorp basin is situated off the south coast of the Republic of South Africa, southeast of Cape Town and west-south-west of Port Elizabeth. It covers approximately 18,000 sq. km beneath the Indian Ocean along the southern coast of South Africa, which is in the southwest of Mosselbay. Bredasdorp basin contains South Africa’s only oil and gas production facilities and has been the main focus for oil and gas exploration in South Africa. It is one of the largest hydrocarbon producing block in South Africa, rich in gas and oil prone marine source rocks of kimmeridgian to berriasian age. The wells of interest for this study are located within block 9 which is made up of 13 wells but for this study the focus is only on 3 wells, which are well F-01,F-02 and F-03. The goal of this study is to predict as accurately as possible the areas within and around the sandstone reservoir intervals of these wells with abnormal pressure, using well logs and production test data. Abnormal pore pressure which is a major problem for drillers in the oil industry can cause serious drilling incidents and increase greatly drilling non-production time if the abnormal pressures are not predicted accurately before and while drilling. Petrophysics log analysis was done to evaluate the reservoirs. The intervals of the reservoir are the area of interest.Pore pressure gradient, fracture gradient, pore pressure and fracture pressure model were run. Pressures of about 6078.8psi were predicted around the zone of interest in well F-01, 7861 psi for well F-02 and 8330psi for well F-03. Well F-03 was the most pressured of the three wells. Abnormal pressures were identified mostly at zones above and below the area of interest and predicted pressure values were compared to actual pressure values to check for accuracy.

Thesis (PhD (Geology))--University of Stellenbosch, 1997.
1123 leaves printed on single pages, preliminary pages and numbered pages 1-286. Includes bibliography, list of figures and tables and explanation of abbreviations used.
Digitized at 600 dpi grayscale to pdf format (OCR), using a Bizhub 250 Konica Minolta Scanner.
ENGLISH ABSTRACT: This first comprehensive study of the petroleum geochemistry of the Bredasdorp Basin, and the adjacent Southern Outeniqua Basin, documents the characteristic large number of hydrocarbon shows and the four regionally distinctive marine source rocks. Detailed correlation of reservoired hydrocarbons with source rock bitumens shows that two source rocks have expelled oil in commercial quantities and two others have expelled commercial quantities of wet gas/condensate. In contrast with earlier studies which indicated that thermal 'gradualism' prevailed, this study indicates that the post-rift thermal history of the basin is very complex. Post-rift cool-down is punctuated by periods of rapidly increasing heat flow resulting in much of the maturation being localised in time. These periods of increased heating coincide with regional plate tectonism. The associated thermal uplift and downwarp effects govern the periods of trap formation and control the hydrocarbon migration direction. Migration distances of these hydrocarbons are described and show inter alia that oil migrates no more than -7-10 km but gas migrates regionally. Two regional episodes of meteoric water flushing reduce sandstone cementation in palaeo-highs forming potential reservoirs at specific times. The unusually low salinity of remnants of this water in some sandstones help characterise these two main migration conduits. A highly detailed hydrocarbon correlation scheme derived from gas, light oil and biomarker data has been established which differentiates products of the four active source rocks and helps characterise the oil-oil, oil-source and source-source pairs. It is evident from these correlations that two periods of migration and reservoiring occurred at 50-60 Ma and 0-10 Ma. As a result, source-reservoir plays which characterise certain areas of the basin as predominantly oil or gas prone can be described. These correlations also highlight areas where mixtures of hydrocarbons are common and where some of the early reservoired oil has been displaced to new locations, constituting potential new exploration plays. Source rocks for some of the analysed hydrocarbons have yet to be found and may not even have been drilled to date. One such source rock appears to be located in the Southern Outeniqua Basin, making that area a potential target for further exploration. This study resolved the common heritage of the source rocks and reservoir sandstones which form part of the Outeniqua petroleum system. The hydrocarbon volumes available to this system show that by world standards it is indeed significant.
AFRIKAANSE OPSOMMING: Die groot aantal koolwaterstof voorkomste asook vier streekskenmerkende mariene brongesteentes word in hierdie eerste omvattende studie van die petroleumgeochemie van die Bredasdorp-kom en die aangrensende Suidelike Outeniqua-kom saamgevat. Gedetaileerde korrelasies van die opgegaarde koolwaterstowwe met brongesteente bitumen, dui daarop dat twee van die vier geidentifiseerde brongesteentes olie in kommersiele hoeveelhede uitgeset het. Die ander twee het kommersiele hoeveelhede nat gas-kondensaat uitgeset. In teenstelling met vroeer studies wat daarop gedui het dat termale 'gradualisme' voorgekom het, dui hierdie studie daarop dat die na-riftermale geskiedenis van die kom baie meer kompleks is. Verskeie periodes van versnelde toename in hittevloei het voorgekom in die na-rifse verkoeling. Dit het daartoe gelei dat veroudering plaaslik binne 'n beperkte tydsverloop plaasvind. Hierdie periodes van hittetoename stem ooreen met die regionale plaattektoniek. Die geassosieerde termiese opheffing en afwaartse vervormingseffek, beheer die totstandkoming van opvanggebiede en die migrasierigting van die koolwaterstowwe. Migrasie-afstande van die koolwaterstowwe word bespreek en wys inter alia daarop dat olie nie verder as -7-10 km beweeg nie, maar gasmigrasie vind regionaal plaas. Twee kort episodes van meteoriese wateruitsetting, het sandsteensementasie in palaeohoogsliggende gebiede verminder wat potensiele reservoirs gevorm het op spesifieke tye. Die ongewone lae soutvlakte van oorblyfsels van die water in sekere sandstene help om die twee vernaamste migrasieroetes te kenmerk. 'n Hoogs omvattende koolwaterstof-korrelasieskema wat van gas, ligte olie en biomerkerdata verkry is, is opgestel. Die skema het onderskei tussen produkte van die vier aktiewe brongesteentes en help om die olie-olie, olie-bron en bron-bron pare te karakteriseer. Dit is duidelik van die korrelasies dat twee periodes van migrasie en opgaring plaasgevind het ongeveer teen -50-60 Ma en 0-10 Ma. Gevolglik kan bronreservoir omskrywings wat sekere dele van die kom karakteriseer as grotendeels olie of gas-ontvanklik beskryf word. Hierdie korrelasies beklemtoon ook areas waar mengsels van koolwaterstowwe algemeen voorkom en waar sekere van die vroeer opgegaarde olie verplaas is na nuwe lokaliteite, wat nuwe eksplorasieteikens daarstel. Brongesteentes vir sekere van die ge-analiseerde koolwaterstowwe, moet nog gevind word en is tot op hede nog nie raakgeboor nie. Een so 'n brongesteente kom voor in die Suidelike Outeniqua-kom, wat daardie area 'n potenslele teiken vir verdere eksplorasie maak. Die studie het die gesamentlike oorsprong van die brongesteente en reservoirsandsteen, wat deel is van die Outeniqua Petroleumsisteem, geidentifseer. Die koolwaterstofvolumes wat beskikbaar is vir die sisteem wys dat, gemeet teen wêreldstandaarde, dit wel beduidend is.

This study described porosity and permeability distribution in the deep marine play of the central Bredasdorp Basin, Block 9, offshore South Africa using methods that include thin section petrography, X-ray diffraction, and scanning electron microscopy, in order to characterize their porosity and permeability distributions, cementation and clay types that affect the porosity and permeability distribution. The study included core samples from nine wells taken from selected depths within the Basin.

Philosophiae Doctor - PhD
Geomechanical analysis and integrity assessment of hydrocarbon reservoirs upon depletion and injection are crucial to ensure that CO2 storage projects can be safely implemented. The Bredasdorp Basin in South Africa has great potential for CO2 storage, given its hugely available exploration data. However, there has not been any geomechanical characterization carried out on this basin to determine its integrity issues. This study aims to investigate the feasibility of a carbon storage project in the E-M depleted gas field. The preliminary geological assessment demonstrates that Zone 2 and Zone 3 display acceptable injectivity for CO2 injection of the E-M gas field. Seismic lines display faults that could affect the caprock's integrity during depletion and carbon storage. Geomechanical characterization provides a guideline as to how geomechanical analysis of depleted fields can be done for a safe CO2 sequestration practice. The geomechanical model constructed at a depth of 2570 m indicated that the magnitudes of the principal vertical, minimum, and maximum horizontal stresses in the field are respectively 57 MPa, 41 MPa, and 42-46 MPa. Fault and fracture stabilities were examined before and after depletion. It was found that faults and fractures in compartments C1 and C2 of the reservoir are stable before and after depletion, while normal faults (FNS8 and FNS9) in compartment C3 dipping SW were critically stressed. The minimum sustainable pressure of the reservoir determined by simulating depletion is 6 MPa. Below that, pressure depletion causes normal faulting in reservoir compartments C1 and C2. The maximum sustainable pressure, on the other hand, was found to be 25 MPa. The geomechanical studies also reveal that it is possible that the reservoir experienced compaction of 8 cm during depletion and will experience an uplift of 3.2 cm during 71 years of injection. The economic model of a CO2-enhanced gas recovery project in E-M gas field, the annual expenses (Aexp) of carbon capture and storage range between Zar20 3.31 × 109 and Zar20 4.10 × 109. The annual revenues (RA) were estimated to be Zar20 1.42 × 1010. The cash flow analysis derived from Aexp and RA confirms that enhanced gas recovery could partially offset the cost of CO2 storage if a minimum of 5 % of CO2 fraction is allowed in the natural gas recovered. Geological and geomechanical studies have demonstrated that carbon storage is physically feasible in the E-M gas field. However, the project's completion lies in the among the gas recovered to balance the cost of CO2. http://

>Magister Scientiae - MSc
The Bredasdorp Basin was formed consequent to extensional episodes during the initial stages of rifting in the Jurassic age. The basin acted as a local depocentre and was primarily infilled with late Jurassic and early Cretaceous shallow-marine and continental sediments. Two wells namely; D-D1 and E-AP1 were studied in order to evaluate the petrophysics and characterize sandstone reservoirs of the western Bredasdorp basin. This could be achieved by generating and comparing results from core analysis and wireline in order to determine if the two wells are comprised of good quality sandstone reservoirs and if the identified reservoirs produce hydrocarbons. A number of methods were employed in order to characterise and evaluate sandstone reservoir, these included; editing and normalization of raw wireline log data ,classification of lithofacies on the basis of lithology, sedimentary structures, facies distribution, grain size variation, sorting of grains, fossils and bioturbation; calibration of log and core data to determine parameters for petrophysical interpretation; volume of clay; determination of porosity, permeability and fluid saturation, cut-off determination to distinguish between pay and non-pay sands. Borehole D-D1 is located in the western part of the Bredasdorp Basin. Only two reservoirs in well D-D1 indicated to have pay parameters with an average porosity ranging from 11.3% to 16%, average saturation from 0.6% to 21.5% and an volume of clay from 26.5% to 31.5%. This well was abandoned due to poor oil shows according to the geological well completion report. On the contrary well E-AP1 situated in the northwestern section of the basin showed good quality reservoir sandstones occurring in the 19082m to 26963m intervals though predominantly water saturated. Pay parameters for all five reservoirs in this well showed zero or no average porosity, saturation and volume of clay.

Magister Scientiae - MSc (Earth Science)
This thesis provides a 2D geomechanical model for the K-R field, Bredasdorp Basin and describes the workflow and process to do so. This study has a unique density correction software applied to density data, prior to the estimation of geopressure gradients. The aim of this research is to create a model that evaluates the geomechanical behaviour of the upper shallow marine reservoir (USM) and provide a safe drilling mud window for future in the area.

>Magister Scientiae - MSc
The Sable Field constitutes a Basin Floor Channel (BFC) complex (E-BD reservoir) and a Basin Floor Fan (BFF) complex (E-CE reservoir). The reservoir sands were deposited during early-drift sedimentation in the Bredasdorp Basin. Paleo-current flows from the west, filling the basin with sediments that are eroded off the continental shelf (Agulhus Arch) and deposited on the base of the continental slope and basin floor. Turbidite flows off the Agulhus arch have deposited the Sable Fields reservoirs, where the larger channelized reservoir body takes an 80° bend off the continental slope and flows onto the basin floor. This 3-D reservoir highlights the reservoirs internal heterogeneity and complexity at the well bore and away from the well bore. Well tops tie wells to the 3-D seismic cube for; reservoir location and delineation, velocity modelling and subsequent conversion of the mapped surfaces from time to depth. Core and petro-physical analysis were used to outline the depositional facies within the investigated wells namely: E-BD5, E-BD2, E-BD1 and E-CE1. Correlation of depositional facies at the well bore with their corresponding seismic facies, allows for extrapolation of facies away from the well bore. The internal heterogeneity of the reservoir is outlined using an integrated methodology, which is based on log scale depositional features (channels, sheets, lobes) that are extrapolated to field scale (sand rich complex) using corresponding top and base reservoir seismic responses. The investigated thick region of sediment accumulation on: the continental slope, the base of the continental slope and basin floor is deposited on the 13AT1 early drift unconformity. The reservoir is outlined from the up-dip to the down-dip reaches of the field. Well E–BD5 has tapped into the proximal region (up-dip), with reservoir comprising of amalgamated channel sands that are deposited by laterally switching and stacking channelized sand bodies. Channel meander facies are seen in the upper portion of the reservoir, with massive channel fill in the lower parts. The channel fill constitutes a high net to gross with little to no lateral facies variations. This confined environment is dominated by amalgamated massive sands (on-axis) that are thinner bedded towards the banks of the channels (off-axis). A high degree of channel amalgamation has been interpreted in both up-dip wells E-BD5 and E-BD2. This channelized reservoir is at least 2km wide and 6km long, before the larger channel makes a rapid 80° change in paleo-current direction. This is possibly the result of basin floor topography and the stacking of previously deposited sand complexes which alter local sea floor topography. The vertical and lateral continuity of the channelised reservoir is generally excellent due to the high degree of channel amalgamation. The stacked channel complex constitutes a gross thickness of 76.2m (68.5m Net sand) in well E-BD5, and a gross thickness 25m (23m Net sand) in well E-BD2. Channel sands in well E-BD5 have an average porosity of 15% while the average porosity of channel sands in well E-BD2 (further down-dip) is 17%. This up-dip channelised region results in high amplitude reflections due to hydrocarbon charged sand juxtaposed against hemipelagic muds and silty levee facies. Well E-BD1 has tapped into a relatively confined sand complex deposited at the base of the continental slope. The amalgamated lobe and sheet sand complex is entirely encased in hemi pelagic mud. These reservoir sands are interpreted to be deposited in the Channel Lobe Transition Zone (CLTZ), thus the reservoir sands are interpreted to have a transitional depositional style (generally channelized sheets). The CLTZ region is thus dominated by both channel complex and lobe complex elements. The E-BD1 reservoir constitutes a number of amalgamated elements that result in a reservoir zone with an average porosity of 16.4%. These include: amalgamated thick bedded sheet sand (lobe axis) associated with deep depositional feeder channels; thin bedded sheet sands (off lobe axis), broad thin amalgamated lobe elements, layered thick bedded sand sheets and deep broad depositional channels. The low sinuosity broad depositional-channels and elongate lobe elements are expressed as lobate amalgamated sheets of sand which is up to 2-3km wide, 5km long and 30m thick (29.7m nett sand) at the well bore. Well E-CE1 has intersected 50m thick reservoir sand (50m nett sand) which constitutes the axis of a lobe complex where the reservoir zone has an average porosity of 14%. The sand rich complex is deposited on the unconfined basin floor. This reservoir complex constitutes amalgamated thick bedded lobe architectural elements which are massive in nature. The laterally continuous hydrocarbon charged lobe elements result in bright parallel seismic reflections. The amalgamated lobe complex is more than 5km wide. Sub-parallel horizons are attributed to the thin bedded off axis portion of the lobe complex where the net to gross is considerably less than the highly amalgamated axis of the lobe complex. The lobe complex has a moderate to good net to gross of 40-60%. The high aspect ratio of the lobe complex severely impacts the reservoirs vertical permeability, however horizontal permeability is quite good due to the extensive lateral continuity of good quality sheet sands. Based on the nature deep water architectural elements observed in this study, the internal heterogeneity of the Basin floor Fan and Basin floor channel complex’s may constitute an entire sand rich reservoir zone. All the sands may be in hydraulic communication if they are genetically related. These sands and stretch from the up-dip (wells E-BD5 & E-BD2) through to the transitional (E-BD2) and pinching out in the distal regions (E-CE1) on the basin floor. The seal constitutes a prominent shale horizon T13PW3 (8-10m thick) which is draped over the entire reservoir complex. This top seal is extrapolated from all the wells and correlated with seismic facies, thus outlining the lateral continuity and thickness variations of the top seal. This draped shale horizon exposes the thick axial portion of the amalgamated channel complex and amalgamated lobe complex.

>Magister Scientiae - MSc
This contribution engages in the evaluation of offshore sandstone reservoirs of the Central Bredasdorp basin, Block 9, South Africa using primarily petrophysical procedures. Four wells were selected for the basis of this study (F-AH1, F-AH2, F-AH4, and F-AR2) and were drilled in two known gas fields namely F-AH and F-AR. The primary objective of this thesis was to evaluate the potential of identified Cretaceous sandstone reservoirs through the use and comparison of conventional core, special core analysis, wire-line log and production data. A total of 30 sandstone reservoirs were identified using primarily gamma-ray log baselines coupled with neutron-density crossovers. Eleven lithofacies were recognised from core samples. The pore reduction factor was calculated, and corrected for overburden conditions. Observing core porosity distribution for all wells, well F-AH4 displayed the highest recorded porosity, whereas well F-AH1 measured the lowest recorded porosity. Low porosity values have been attributed to mud and silt lamination influence as well as calcite overgrowths. The core permeability distribution over all the studied wells ranged between 0.001 mD and 2767 mD. Oil, water, and gas, were recorded within cored sections of the wells. Average oil saturations of 3 %, 1.1 %, and 0.2 % were discovered in wells F-AH1, F-AH2, and F-AH4. Wells F-AH1 to F-AR2 each had average gas saturations of 61 %, 57 %, 27 %, and 56 % respectively; average core water saturations of 36 %, 42 %, 27 %, and 44 % were recorded per well.

>Magister Scientiae - MSc
Seismic interpretation is always somewhat an uncertainty and questions on whether the horizons picked are properly correlated across faults and or the structures mapped are geologically or geometrically sensible always raise a concern as it provides the principal source of subsurface information used commonly in exploration by the oil and gas industry. In this study an attempt of delineating what are or not geological features has been done by validating the seismic structural interpretation using the restoration technique which also provided information about the extensional history of the study area. The seismic data, horizon and fault interpretation have been depth converted in 2DMove software followed by a sequential restoration and decompacting workflow. Simple shear was used as the restoration algorithm based on the deformation style of the basin (extensional basin). The seismic interpretation is valid and studies on tectonics interplay in basin development (gas field scale) during the Late-Jurassic- Early Cretaceous are based on the results of the four balanced cross-sections. They indicate that the Basin is not a simple extensional rift Basin but was rather formed through an alternation of extensional and compressional phases. The area understudy has undergone extension since rifting onset (break-up of Gondwana) with two intervening minor inversion episodes further NW and SE showing no significant shortening on the central part. A maximum extension is noted within the central part of the study area along the XL_1248 thus more accommodation space and subsequently thicker sediment accumulations are encountered in this region.

The reservoir quality (RQ) of well E-BA1 was characterized using thin sections and core samples in a petrographic study. Well E-BA1 is situated in the Bredasdorp Basin, which forms part of the Outeniqua Basin situated in the Southern Afircan offshore region. Rifting as a result of the break up of Gondwanaland formed the Outeniqua Basin. The Bredasorp Basin is characterized by half-graben structures comprised of Upper Jurassic, Lower Cretaceous and Cenozoic rift to drift strata. The current research within the thesis has indicated that well E-BA1 is one of moderate to good quality having a gas-condensate component.

Bibliography: pages 117-121.
De Hoop Vlei is a saline coastal lake situated 53 kilometres north-east of Cape Agulhas in the Western Cape Province of South Africa. It is probably of estuarine origin but is now separated from the sea by mobile sand dunes and, therefore, has no surface outflow. Inflow to the vlei is from a catchment area of approximately 1200 km2 in which intensive grain farming is practised. The vlei is situated within the De. Hoop Nature Reserve and its ecological value, particularly as a breeding ground for water birds, has been recognised in its designation as an international RAMSAR conservation site. Agricultural practices in the catchment have been identified as a potential threat to the ecology of the vlei. The overall objective of this study was to provide a geochemical characterisation of De Hoop Vlei. It focused on identifying the geochemical factors and processes which control the water chemistry of the vlei and attempted to identify any influence of agricultural activities on water quality. This was achieved through a geochemical interpretation of the results obtained from analyses of water and sediment samples collected during the study. Use was also made of Department of Water Affairs and Forestry monitoring data in order to examine long term behaviour of the system, particularly with respect to the effect of evaporative concentration on water composition. Furthermore, chemical equilibrium was modelled, using the geochemical model MINTEQA2, in order to give an indication of processes likely to occur in the water as well as the behaviour of certain possible pollutants in the vlei. Water and sediment core samples, collected during two separate sampling trips, were taken along the entire length of the vlei and some water samples were taken in the catchment. Interstitial waters were obtained by suction from sediment cores. Samples of secondary precipitates, found along the edge of the vlei, were also taken. The following laboratory analyses were performed on water samples: pH, EC, alkalinity, major cations and anions, dissolved P, fluoride, and the trace metals Fe, Mn, Al, Ni, Cu, Zn, and Pb. The following laboratory analyses were performed on sediment samples: pH of wet and dried sediments, organic C content, carbonate content, total elemental concentrations of major and trace elements, mineralogy, clay percentage and extractable P, Zn and K. Scanning electron microscopy and mineralogical analyses were performed on samples of secondary precipitates.

Thesis (PhD)--Stellenbosch University, 2015.
ENGLISH ABSTRACT: This study investigates the crustal structure, and assesses the qualitative and quantitative impacts of crust-mantle dynamics on subsidence pattern, past and present-day thermal field and petroleum system evolution at the southern South African continental margin through the application of a multi-disciplinary and multi-scale geo-modelling procedure involving both conceptual and numerical approaches. The modelling procedure becomes particularly important as this margin documents a complex interaction of extension and strike-slip tectonics during its Mesozoic continental rifting processes. Located on the southern shelf of South Africa, the Western Bredasdorp Basin (WBB) constitutes the focus of this study and represents the western section of the larger Bredasdorp sub-basin, which is the westernmost of the southern offshore sub-basins. To understand the margin with respect to its present-day structure, isostatic state and thermal field, a combined approach of isostatic, 3D gravity and 3D thermal modelling was performed by integrating potential field, seismic and well data. Complimenting the resulting configuration and thermal field of the latter by measured present-day temperature, vitrinite reflectance and source potential data, basin-scale burial and thermal history and timing of source rock maturation, petroleum generation, expulsion, migration and accumulation were forwardly simulated using a 3D basin modelling technique. This hierarchical modelling workflow enables geologic assumptions and their associated uncertainties to be well constrained and better quantified, particularly in three dimensions. At present-day, the deep crust of the WBB is characterised by a tripartite density structure (i.e. prerift metasediments underlain by upper and lower crustal domains) depicting a strong thinning that is restricted to a narrow E-W striking zone. The configuration of the radiogenic crystalline crust as well as the conductivity contrasts between the deep crust and the shallow sedimentary cover significantly control the present-day thermal field of the study area. In all respects, this present-day configuration reflects typical characteristics of basin evolution in a strike-slip setting. For instance, the orientations of the deep crust and fault-controlled basin-fill are spatially inconsistent, thereby indicating different extension kinematics typical of transtensional pull-apart mechanisms. As such, syn-rift subsidence is quite rapid and short-lived, and isostatic equilibrium is not achieved, particularly at the Moho level. Accompanied syn-rift rapid subsidence and a heat flow peak led to petroleum preservation in the basin since the Early Cretaceous. Two additional post-rift thermal anomalies related to the Late Cretaceous hotspot mechanism and Miocene margin uplift in Southern Africa succeeded the syn-rift control on maturation. This thermal maturity of the five mature source rocks culminated in four main generation and three main accumulation phases which characterise the total petroleum systems of the WBB. The Campanian, Eocene and Miocene uplift scenarios episodically halted source maturation and caused tertiary migration of previously trapped petroleum. Petroleum loss related to the spill point of each trap configuration additionally occurs during the Late Cretaceous-Paleocene and Oligocene-Early Miocene. The timing and extent of migration dynamics are most sensitive to the geological scenario that combined faulting, intrusive seal bypass system and facies heterogeneity. In fact, for models that do not incorporate facies heterogeneity, predicted past and present-day seafloor leakage of petroleum is largely underestimated. This complex interplay of generation and migration mechanisms has significant implications for charging of petroleum accumulations by multiple source rocks. Due to early maturation and late stage tertiary migration, the syn-rift source rocks particularly Mid Hauterivian and Late Hauterivian source intervals significantly control the extent of petroleum accumulation and loss in the basin. Lastly, the modelled 3D crustal configuration and Mezosoic to Cenozoic thermal regime of the WBB dispute classic uniform lithospheric stretching for the southern South African continental margin. Rather, this PhD thesis confirms that differential thinning of the lithosphere related to a transtensional pull-apart mechanism is the most appropriate for accurately predicting the evolution of basin and petroleum systems of the margin. Also, the presented 3D models currently represent the most advanced insights, and thus have clear implications for assessing associated risks in basin and prospect evaluation of the margin as well as other similar continental margins around the world.
AFRIKAANSE OPSOMMING: Hierdie studie ondersoek die korsstruktuur en evalueer die kwalitatiewe en kwantitatiewe impakte van kors-mantel-dinamika op insinkingspatroon, die termiese veld en petroleumstels evolusie aan die suidelike Suid-Afrikaanse kontinentale grens, in die hede en die verlede, deur die toepassing van ’n multidissiplinêre en multiskaal-geomodelleringsprosedure wat beide konseptuele en numeriese benaderings behels. Die modelleringsprosedure veral is belangrik aangesien hierdie kontinentale grens ’n komplekse interaksie van uitbreidings- en strekkingsparallelle tektoniek gedurende die Mesosoïese vastelandskeurprosesse daarvan dokumenteer. Omdat dit op die suidelike platvorm van Suid-Afrika geleë is, maak die Westelike Bredasdorp Kom (WBK) die fokus van hierdie studie uit, en verteenwoordig dit die westelike deel van die groter Bredasdrop-subkom, wat die verste wes is van die suidelike aflandige subkomme. Om die grens met betrekking tot sy huidige struktuur, isostatiese staat en termiese veld te verstaan, is ’n kombinasie benadering bestaande uit isostatiese, 3D-gravitasie- en 3D- termiese modellering gebruik deur potensiëleveld-, seismiese en boorgatdata te integreer Ondersteunend totot die gevolglike konfigurasie en termiese veld van die laasgenoemde deur middel van hedendaagse temperatuur, soos gemeet, vitriniet-refleksiekoëffisiënt en bronpotensiaal data, komskaal-begrawing en termiese geskiedenis en tydsberekening van brongesteentematurasie, is petroleumgenerasie, -uitwerping, -migrasie en -akkumulasie in die toekoms gesimuleer deur gebruik te maak van ’n 3D-kommodelleringstegniek. Hierdie hierargiese modelleringswerkvloei maak dit moontlik om geologiese aannames en hulle geassosieerde onsekerhede goed aan bande te lê en beter te kwantifiseer, veral in drie dimensies. In die hede word die diep kors van die WBK gekarakteriseer deur ’n drieledige digtheidstruktuur (met ander woorde voorrift-metasedimente onderlê deur bo- en benedekors domeine) wat dui op ’n baie wesenlike verdunning, beperk tot ’n dun O-W-strekkingsone. Die konfigurasie van die radiogeniese kristallyne kors, sowel as die konduktiwiteitskontraste tussen die diep kors en die vlak sedimentêre dekking, beheer grotendeels die hedendaagse termiese veld van die studiearea. Hierdie hedendaagse konfigurasie weerspieël in alle opsigte tipiese eienskappe van kom-evolusie in ’n skuifskeur omgewing. Byvoorbeeld, Die oriëntasies van die diep kors en verskuiwingbeheerde komsedimentasie byvoorbeeld is ruimtelik inkonsekwent en dui daardeur op verskillende ekstensiekinematika, tipies van transtensionale tensiemeganisme. As sulks, is sin-rift-versakking taamlik vinnig en kortstondig, en word isostatiese ekwilibrium nie by die Moho-vlak, in die besonder, bereik nie. Samehangende sin-rift vinnige versakking en hittevloeihoogtepunt het gelei tot petroleum behoud in die kom sedert die vroeë Kryt. Twee bykomende post-rift termiese anomalieë wat verband hou met die laat Kryt-“hotspot” meganisme en die Mioseense kontinentale grensopheffing in Suidelike Afrika het die sin-rift-beheer met maturasie opgevolg. Hierdie termiese maturiteit van die vyf gematureerde brongesteentes het in vier hoofgenerasie- en drie hoofakkumulasie fases, wat die totaliteit van die petroleumstelsels van die WBK karakteriseer, gekulmineer. Die Campaniese, Eoseense en Mioseense opheffings senarios het episodies bronmaturasie gestop en tersiêre migrasie van petroleum wat vroeër opgevang was veroorsaak. Addisioneel vind petroleumverlies gekoppel aan die spilpunt van elke opvanggebiedkonfigurasie tydens die laat Kryt-Paleoseen en Oligoseenvroeë Mioseen plaas. Die tydstelling en omvang van migrasiedinamika is die sensitiefste vir die geologiese scenario wat verskuiwing, seëlomseilingstelsel en fasiesheterogeniteit kombineer. Trouens, vir modelle wat nie fasiesheterogeniteit inkorporeer nie, is voorspellings van vroeëre en huidige seebodemlekkasie van petroleum grotendeels onderskattings. Hierdie komplekse wisselwerking van generasie- en migrasiemeganismes het beduidende implikasies vir die laai van petroleumakkumulasies deur veelvoudige brongesteentes. Vanweë vroeë maturasie en laatstadiumtersiêre migrasie, oefen die sin-rift-brongesteentes, veral middel Hauterivium- en laat Hauteriviumbronintervalle, beduidende beheer oor die omvang van petroleumakkumulasie en -verlies in die kom uit. Laastens weerspreek die gemodelleerde 3D-korskonfigurasie en Mesosoïese-tot-Senosoïesetermiese regime van die WBK ’n klassieke uniforme litosferiese rekking vir die suidelike Suid- Afrikaanse kontinentale grens. Inteendeel, hierdie PhD-proefskrif bevestig dat ’n differensiële verdunning van die litosfeer, gekoppel aan ’n transtensiemeganisme, die beste geskik is om ’n akkurate voorspelling oor die evolusie van kom- en petroleumstelsels van die kontinentale grens mee te maak. Verder, verteenwoordig die 3D-modelle, wat hier aangebied word, tans die mees gevorderde insigte, en het hierdie modelle dus duidelike implikasies vir die assessering van verwante risiko’s in kom- en petroleum teikene valuering van die kontinentale grens, so wel as van ander soortgelyke kontinentale grense regoor die wêreld.

>Magister Scientiae - MSc
The Bredasdorp Basin is located on the southern continental margin, off the coast of South Africa. It is mostly filled by marine Aptian to Maastrichtian deposits, overlaying pre-existing Late Jurassic to Early Cretaceous fluvial and shallow marine synrift deposits. The basin is a southeastern trending rift basin, located between the Columbine-Agulhas and Infanta arches. Its basement is made up of slates of the Bokkeveld Group (Devonian) and or quartzites of the Table Mountain Group (Ordovician-Silurian). The study area extends from X-X field to Y-Y field and encompasses only four wells for this investigation; well A, B, C and D respectively. This study was done through the interpretation; integration and juxtaposing of the results from core analysis with wireline log analysis (gamma ray) using Petrel software to display and correlate the well logs. Through core analysis which is the main source of information for this study, seven facies were identified and interpreted for the entire study. These facies alternate throughout each well and between different wells, but they are not evident in all the cores. Throughout the study, well A has been used as a reference well, since it appears (according to the interpretations) to record all seven facies and has the thickest section of zone 3. This zone reflects more accommodation space than the other studied wells at the time of deposition. Facies analysis of cores and well log correlation provide evidence that the studied USM sandstones are compatible with a wave dominated estuary/island-bar lagoon system to shoreface of a wave dominated marine shelf. It has previously been demonstrated that on the northern shelf of the Bredasdorp Basin, the USM typically has an hour-glass gamma ray log signature as a result of long-term transgression and regression and this typical log shape was also identified in this study from well A .

>Magister Scientiae - MSc
This study was aimed at determining the sedimentary environment, its evolution and facies areal distribution of the Upper Shallow Marine (USM, Late Valanginian). The study was conducted in wells E-S1, F-AH4 and E-W1 in the Bredasdorp basin between E-M and F-AH fields, located in a basinwards transect roughly transverse to the palaeocoast. The wells were studied by logging all the cores in detail between the chosen intervals, followed by facies analysis. Each core log was tied with its respective gamma ray and resistivity well logs. The logs were then correlated based on their log signatures, trends and facies interpretation. The Gamma ray logs show a fining-upwards and coarsening-upwards trend (“hour-glass shape”) in E-S1 and F-AH4 while in E-W1 it shows more accommodation space. These trends are believed to have been influenced by relative sea level changes, such as transgression and regression. Facies analysis identified seven facies in the study area: Facies A, B, C, D, E, F and G. Facies A, B and C were interpreted as fair-weather and storm deposits of the offshore-transition zone, shoreface and foreshore respectively. Facies D was considered as lagoonal mud deposits, while Facies E and F were interpreted as tidal channel and tidal bar deposits respectively. Finally Facies G was considered as fluvial channel deposits. The facies inferred that the sedimentary environment of the study area is a wave-dominated estuary or an Island-bar lagoon system. This led to the production of a conceptual model showing the possible locations for the three wells in the Island bar-lagoon system. The conceptual model inferred the previous findings from PGS (1999) report, that the Upper Shallow Marine beds were deposited in a tidal/estuarine to shoreface setting. This model also supports the findings of Magobiyane (2014), which proposed a wave-dominated estuary for the Upper Shallow Marine reservoir between E-M and F-AH fields, located west of the study area.

Geological 3D static modelling has become an integral tool during the appraisal and developmental stages of a hydrocarbon field lifecycle. The 3D model becomes the basis upon which reservoir heterogeneity and characterisation are understood, hydrocarbon volumetrics are calculated and field development plans are designed. Reservoir compartmentalisation and fault-seal analysis is also an industry topic which has drawn much interest. Having a 3D model allows for fault-seal analyses to be carried out and evaluated using the statistically distributed reservoir properties. This study incorporates the building of a 3D geo-cellular reservoir model with a fault seal analysis of the E-S field, which is located on the north flank of the Bredasdorp Basin. The reservoir model was built using geostatistical methods to populate the several reservoir parameters into the model to calculate a hydrocarbon volume. In addition, a fault-seal analysis was carried out in order to investigate the phenomenon of having an oil accumulation separated from a gas accumulation either side of a fault. The facies modelling was carried out using the object modelling technique, in order to produce a model which is geologically plausible. Most of the remaining reservoir parameters were modelled using a variogram except in the case of water saturation, which was modelled using a J function equation. The volumetrics were assigned per fault block. Using a recovery factor of 75% for gas and 11% for oil, the calculated total recoverable hydrocarbons were 12.6 Bscf and 1.3 MMbbl respectively. The fault-seal analysis showed that the faults separating two of the fault blocks are not completely sealing. All the calculated fault properties supported this view, with the Shale Gouge Ratio (SGR) and threshold pressure relationship indicating a high likelihood for leakage across parts the faults. Pressure data from Repeat Formation Tests (RFT) however, indicates that the hydrocarbon accumulations in both blocks are isolated from each other. This contradiction has informed the recommendation to drill a highly deviated or short horizontal well which will cross the fault and intersect both blocks, and to complete the well using a sliding sleeve, thus providing the flexibility needed in order to manage multi-phase flow.

>Magister Scientiae - MSc
The Bredasdorp Basin is one of the largest hydrocarbon producing blocks within Southern Africa. The E-M field is situated approximate 50 km west from the FA platform and was brought into commission due to the potential hydrocarbons it may hold. If this field is brought up to full producing capability it will extend the lifespan of the refining station in Mosselbay, situated on the south coast of South Africa, by approximately 8-10 years. This study is focused in block 9 off shore western part of the Bredasdorp Basin in the main Outeniqua Basin South Africa. Cretaceous Sandstone reservoirs are commonly heterogeneous consequently they may require special methods and techniques for description and evaluation. Reservoir characterization is the study of the reservoir rocks, their petrophysical properties, the fluids they contain or the manner in which they influence the movement of fluids in the subsurface. The main goal of the research is to assess the potentials of hydrocarbons in Cretaceous sediments in the Bredasdorp Basin through the integration and comparison of results from core analysis, production data and petrography studies for the evaluation and correction of key petrophysical parameters from wireline logs which could be used to generate an effective reservoir model for wells (E-BB1, E-BD2, EA01) in the Bredasdorp Basin. Porosity and permeability relationships, wire-line log data have been examined and analysed to determine how the porosity and permeability influence reservoir quality which further influences the potential of hydrocarbon accumulation in the reservoirs. The reservoir sandstone is composed mainly of fine to medium grained Sandstones with intercalation of finger stringers of Siltstone and Shale. In carrying out this research the samples are used to characterize reservoir zones through core observation, description and analyses and compare the findings with electronic data obtained from Petroleum Agency of South Africa (PASA). Secondary data obtained from (PASA) was analysed using softwares such as Interactive Petrophysics (IP), Ms Word, Ms excel and Surfer. Wireline logs of selected wells (E-BB1, E-BD2, E-A01) were generated, analysed and correlated. Surfer software also used to digitize maps of project area, porosity and permeability plotted using IP. Formation of the Bredasdorp Basin and it surrounding basins during the Gondwana breakup. The Bredasdorp Basin consists mainly of tilting half graben structures that formed through rifting with the break-up of Gondwanaland. The model also revealed that these faults segregate the reservoir which explains the pressure loss within the block. The production well was drilled, confining pressure relieved and pressure dropped hence production decreases. The age, transportation, deposition and thermal history of sediment in the basin, all plays a vital role in the type of hydrocarbon formation. Structural features such as faults, pore spaces determines the presence of a hydrocarbon in the reservoir. Traps could be stratigraphic or structural which helps prevent the migration of hydrocarbons from the source rock to reservoir rock or from reservoir rock to the surface over a period of time. The textural aspects included the identification of grain sizes, sorting and grain shapes. The diagenetic history, constructed from the results of the reservoir quality study revealed that there were several stages involved in the diagenetic process. It illustrated several phases of cementation with quartz, carbonate and dolomite with dissolution of feldspar. A potentially good reservoir interval was identified from the data and was characterized by several heterogeneous zones. Identifying reservoir zones was highly beneficial during devising recovery techniques for production of hydrocarbons. Secondary recovery methods have thus been devised to enhance well performance. As recommendation, additional wells are required to appraise the E-M structure and determine to what extent the cement present in the basin has affected fluid flow as well as the degree of sedimentation that could impede fluid flow. There are areas still containing untapped resources thus the recommendation for extra wells. This research may well be reviewed with more data input from PetroSA (wells, seismic and production data) for additional studies, predominantly with respect to reservoir modelling and flow simulation. Based on the findings of this research, summary of calculated Net Pay shows that in well E-BB1, reservoir (1) is at depth 2841.5m – 2874.9m has a Gross Thickness of 33.40m, Net Pay of 29.72 and Pay Summary of 29.57 and reservoir (2) has depth of 2888.1m – 2910.5m, Gross Thickness of 22.40m, Net Pay of 19.92m and Pay summary of 1.48m. Well E-AO1 has depth from 2669.5m – 2684.5m and Gross Thickness of 15.00m and has Net Pay of 10.37m and Pay Summary of 10.37m. Based on the values obtained from the data analysed the above two wells displays high potential of hydrocarbon present in the reservoirs. Meanwhile well E-BD2 has depth from 2576.2m – 2602.5m and has Gross Thickness of 350.00m, Net Pay of 28.96m and Pay Summary of 4.57 hence from data analysis this reservoir displays poor values which is an indication of poor hydrocarbon potentials.

>Magister Scientiae - MSc
This study is located within the Bredasdorp Basin which is on the southern continental margin, offshore South Africa. The basin is located between Infanta and Agulhas arches and is a rift basin that is southeastern trending. Sedimentology reports have shown that the basin is predominantly filled by Aptian to Maastrichtian deposits which overlays pre-existing late Jurassic to Early Cretaceous fluvial and shallow marine syn-rift deposits. Devonian Bokkeveld Group slates and or Ordovician-Silurian Table Mountain Group quartzites are shown to be the composition of basement rocks. The study area incorporates only three wells for this research; well F-AH1, F-AH2 and F-AR1. This paper was completed through analyzing and juxtaposing interpretations of results from gamma ray wireline log analysis with core analysis in which these correlations and figures were displayed using Petrel software and Coral Draw respectively. Core analysis resulted in the identification of, sixteen litho-facies for the entire study, which were recognized according to its grain size, texture, sedimentary structures, colour changes, base and top contacts, bioturbation, noticeable minerals, etc. Facies tend to alternate all the way through each well and between different wells with similar facies being present in different wells, but they are not evident in all the cores. Based on the classification of sand bodies, core analysis provides good indication that the general depositional environment of reservoirs within the studied wells are within a marginal marine depositional environment which are tidally influenced. Log signatures typical of sandstone reservoir bodies were discovered in the field where sand bodies are 20 m thick or less and were recognized in the study area. Depositional environments were characterized based on depositional environment similarities: a funnel-shaped facies representing a crevasse splay; a cylindrical-shaped facies representing slope channel-fills representing the transgressive-regressive shallow marine shelf.

>Magister Scientiae - MSc
The goal of this study is to enhance the evaluation of subsurface reservoirs by improving the prediction of petrophysical parameters through the integration of wireline logs and core measurements. Formation evaluations of 13A and 14A sequences in the Bredasdorp Basin, offshore South Africa have been performed. Five wells in the central area of the basin have been selected for this study. Four different lithofacies (A, B, C, D) were identified, in the two cored wells, and used to predict the lithofacies from wireline logs in uncored intervals and wells. A method based on artificial neural network was used for this prediction. Facies A and B were recognized as reservoir rocks and 13 reservoir zones were identified and successfully evaluated in a detailed petrophysical model. The final shale volume was considered to be the minimum among five different methods applied in this study at any point along the well log. The porosity model was taken from the density model. A value of 2.66 g/cm3 was obtained from core measurements as the field average grain density, whereas the value of the fluid density of 0.79 g/cm3 was obtained from core porosity and bulk density cross-plot. In a water saturation model; an average water resistivity of 0.135 Ohm-m was estimated from SP method. The calculated water saturation models were calibrated with core measurements, and the Indonesia model best matched with the water saturation from conventional core analysis. Six hydraulic flow units were recognized in the studied reservoirs, and were used for permeability predictions. The permeability predicted from hydraulic flow units were found more reliable than the permeability calculated from porosity-permeability relationship. The net pay was identified for each reservoir by applying cut-offs on permeability 0.1 mD, porosity 7%, shale volume 0.35, and water saturation 0.60. The gross thickness of the reservoirs ranges from 4.83m to 41.07m and net pay intervals from 1.21m to 29.59m.

The Bredasdorp Basin is one of the largest hydrocarbon producing blocks within Southern Africa. The E-M field is situated approximate 50 km west from the FA platform and was brought into commission due to the potential hydrocarbons it may hold. If this field is brought up to full producing capability it will extend the lifespan of the refining station in Mosselbay, situated on the south coast of South Africa, by approximately 8 to 10 years. An unexpected pressure drop within the E-M field caused the suite not to perform optimally and thus further analysis was imminent to assess and alleviate the predicament. The first step within the project was to determine what might have cause the pressure drop and thus we had to go back to cores drilled by Soekor now known as Petroleum South Africa, in the early 1980&rsquo
s.

Analyses of the cores exposed a high presence of granulation seams. The granulation seams were mainly subjected within sand units within the cores. This was caused by rolling of sand grains over one another rearranging themselves due to pressure exerted through compaction and faulting, creating seal like fractures within the sand. These fractures caused these sand units to compartmentalize and prohibit flow from one on block to the next. With advance inquiry it was discovered that there was a shale unit situated within the reservoir dividing the reservoir into two main compartments. At this point it was determined to use Petrel which is windows based software for 3D visualization with a user interface based on the Windows Microsoft standards. This is easy as well as user friendly software thus the choice to go with it. The software uses shared earth modeling tool bringing about reservoir disciplines trough common data modelling. This is one of the best modelling applications in the available and it was for this reason that it was chosen to apply within the given aspects of the project A lack of data was available to model the granulation seams but with the data acquired during the core analyses it was possible to model the shale unit and factor in the influences of the granulation seams to asses the extent of compartmentalization. The core revealed a thick shale layer dividing the reservoir within two sections which was not previously noted. This shale layer act as a buffer/barrier restricting flow from the bottom to the top halve of the reservoir. This layer is thickest at the crest of the 10km²
domal closure and thins toward the confines of the E-M suite. Small incisions, visible within the 3 dimensional models could serve as a guide for possible re-entry points for future drilling. These incisions which were formed through Lowstand and Highstand systems tracts with the rise and fall of the sea level. The Bredasdorp Basin consists mainly of tilting half graben structures that formed through rifting with the break-up of Gondwanaland. The model also revealed that these faults segregate the reservoir further creating bigger compartments. The reservoir is highly compartmentalized which will explain the pressure loss within the E-M suite. The production well was drilled within one of these compartments and when the confining pressure was relieved the pressure dropped and the production decrease. As recommendation, additional wells are required to appraise the E-M structure and determine to what extent the granulation seems has affected fluid flow as well as the degree of sedimentation that could impede fluid flow. There are areas still containing untapped resources thus the recommendation for extra wells.

>Magister Scientiae - MSc
The study area for this thesis focuses on the central northern part of the Bredasdorp Basin of southern offshore South Africa, where the depositional environments of wells E-M1, E-M3 and E-AB1 were inferred through electro sequence analysis and sequence stratigraphy analysis of the corresponding seismic line (E82-005). For that, the Petroleum Agency of South Africa (PASA) allowed access to the digital data which were loaded onto softwares such as PETREL and Kingdom SMT for interpretational purposes. The lithologies and sedimentary environments were inferred based on the shape of the gamma ray logs and reported core descriptions. The sequence stratigraphy of the basin comprises three main tectonic phases: Synrift phase, Transitional phase and Drift phase. Syn-rift phase, which began in the Middle Jurassic during a period of regional tectonism, consists of interbedded red claystones and discrete pebbly sandstone beds deposited in a non-marine setting. The syn-rift 1 succession is truncated by the regional Horizon ‘C’ (1At1 unconformity). The transitional phase was influenced by tectonic events, eustatic sea-level changes and thermal subsidence and characterized by repeated episodes of progradation and aggradation between 121Ma to 103Ma, from the top of the Horizon ‘C’ (1At1 unconformity) to the base of the 14At1 unconformity. Finally the drift phase was driven by thermal subsidence and marked by the Middle Albian14At1 unconformity which is associated with deep water submarine fan sandstones. During the Turonian (15At1 unconformity), highstand led to the deposition of thin organic-rich shales. In the thesis, it is concluded that the depositional environment is shallow marine, ranging from prograding marine shelf, a transgressive marine shelf and a prograding shelf edge delta environment.

>Magister Scientiae - MSc
Southern offshore basins of South Africa are well known as potential provinces of hydrocarbon exploration and production. The complex nature of the Bredasdorp sub-basin’s syn-rift architecture (transform fault system) can have adverse effects on reservoir distribution due to periodic local and regional uplift of horsts and grabens. This present investigation focusses on an integrated approach of the 1AT1-V horizon or early Cretaceous sediments in the Bredasdorp sub-basin to identify the depositional environment and provenance of these sediments as well as their role in regionally complex compositional heterogeneities associated with the late stage rifting of Gondwana break-up. An integrated seismic, sedimentological (including petrography and geochemistry) and ichnologic analysis of the 1AT1-V horizon sediments showed an overall lower regressive element complex assemblage set and an upper transgressive element complex assemblage set that occurred as a >120m thick succession. The analysis identified a mixed-energy deltaic succession followed by an estuarine succession. The 1AT1-V interval (late syn-rift) consisted of nine sedimentary facies associations (and associated petrofacies) on a dipslope setting with variations occurring along the strike and the downdip depositional slope areas. Two overall sequences were identified as a lower regressive and upper transgressive sequence (Element complex assemblage sets). The regressive sequence consisted of middle to distal delta front lobe fringes, hyperpycnal event beds (sourced from basement highs), offshore migrating tidal bars (and associated inter-bar regions), distal mouth bars, terminal distributary channels (and associated inter-terminal distributary regions). The distal delta plain to proximal delta front consisted of interdistributary bays, distributary channels, crevasse splay sub-deltas, mouth bars, tidal flats and offshore embayments. In the laterally isolated depocenter, these deposits also consisted of basement high slopes with upliftment of the basement highs leading to proximal/central embayment to regressive shoreface/foreshore environments. These sequences consisted generally of low diversity and intensities (impoverished abundances) of trace fossils. The paleoclimate inference from this sequence indicates a humid climate with intermediate degrees of weathering intensities (possibly fluctuating arid-humid conditions). The transgressive sequence consisted of estuarine sedimentation with the occurrence of tidal sand ridges and compound dune fields, embayment facies and tidal bars. These sequences consisted of relatively higher ichnodiversities and intensities than their relative regressive sequences. The paleoclimate inference during these times consisted of more arid to semi-arid settings with low degrees of weathering in the source terrain. Local tectonic upliftment and subsidence, with exposed basement highs, gave rise to differential process regimes (tidal, wave and fluvial) and hence depositional facies in the diachronous updip/downdip areas (spatial) and within-stratigraphic (temporal) variations. There are several modern analogues that are similar to the 1AT1-V horizon sequence and they are the Mahakam, Ganges-Brahmaputra, Po, Burdekin deltaic and Satpara lake environments Compaction and dissolution diagenetic features as well as transportation were responsible for the major compositional heterogeneities concerning the reservoir quality and distribution. Proximal and distal sources were identified with first cycle and polycyclic sediments being deposited in the northern and southern part of the basin during the late stages of rifting in the Bredasdorp sub-basin. The provenance lithology has been identified as recycled sedimentary rocks (and their meta-equivalents) with an ultimate source terrain that was largely felsic in nature (Cape granite suite). The northern part of the studied section is suggested to have received sediments from the main metasedimentary rocks of the Cape fold belt (including the Table Mountain Group and Bokkeveld Group) whereas the southern sections received more sediments from the basement highs (recycled Malmesbury Group (and Pre-Cape sediments) and Cape granite suite), which is further supported by seismic data. Provenance analysis revealed that the Cape Fold belt (most recent collision) was possibly a provenance terrain but overprinting of several collisions are also acknowledged. The tectonic setting was envisaged to be of a rifted margin during the break-up of Gondwana. This compositional heterogeneity due to facies and provenance-related terrains had major consequences to the reservoir quality and distribution from the northern part to the southern part of the studied section

Magister Scientiae - MSc
The Bredasdorp basin is a sub-basin of the greater Outeniqua basin. It is located off the south coast, Southeast of Cape Town, South Africa. This basin is one of the largest hydrocarbon (mainly gas) producing basins within Southern Africa. The petrophysical characteristic of the E-block sandstone units within the Bredasdorp basin has been studied to evaluate their hydrocarbon potential. The data sets used in this research were wireline logs (Las format), core data, and geological well completion reports. The three studied wells are E-AH1, E- BW1 and E-L1. The evaluated interval ranges from 2000.33m to 3303.96m in depth with reference to Kelly bushing within the wells. The sandstone reservoirs of the Bredarsdorp basin are characterized by a range of stacked and amalgamated channels. They originated from materials eroded from pre-existing high stand shelf sandstone and transported into the central Bredarsdorp basin by turbidity current. These sandstones are generally in both synrift and drift section. The basin is thought to have developed from fan deltas and stream overwhelmed to water dominated delta. River dominated deltaic system progresses southward over the Northern edge of the central Bredasdorp basin. The Interactive Petrophysics (IP) software has been used extensively throughout the evaluation and development of interpretation model. The lithofacies of the rock units were grouped according to textural and structural features and grain sizes of well (E-AH1, E-BW1 and E-L1). Four different facies (A, B, C and D) were identified from the cored intervals of each well. Facies A was classified as a reservoir and facies B, C and D as a non-reservoir. Detailed petrophysical analyses were carried out on the selected sandstone interval of the studied wells. The cut-off parameters were applied on the seven studied sandstone interval to distinguish between pay and non-pay sand and all intervals were proved to be producing hydrocarbon. Volume of clay, porosity, water saturation and permeability were calculated within the pay sand interval. The average volume of clay ranged from 23.4% to 25.4%. The estimated average effective porosity ranged from 9.47% to 14.3%. The average water saturation ranged from 44.4% to 55.6%. Permeability ranged from 0.14mD to 79mD. The storage and flow capacity ranged from 183.2scf to 3852scf and 2.758mD-ft to 3081mD-ft respectively. The geological well completion reports classify these wells as a gas producing wells. E-L1 is estimated to have a potential recoverable gas volume of 549.06 cubic feet, E-BW1 is estimated to have 912.49 cubic feet and E-AH1 is estimated to have 279.69 cubic feet.

>Magister Scientiae - MSc
Velocity modelling forms an integral part of the seismic interpretation process initially completed in two-way time. In order for a representative depth conversion, it is obligatory to construct a velocity model that serves the bridge between velocity and respective two-way time. This study deals with the investigation of subsurface heterogeneities and its impact on the variation of velocities. Interpretation of time domain reflection data results in one or more seismic horizons, however these horizons should represent the variation in subsurface geology as a result of acoustically different layers displaying varying reflection amplitudes. The purpose of this study was fulfilled by examining the variation of these velocities in relation to the geology and its significance towards building a velocity model. It is evident that complexities, such as an existing heterogeneous subsurface is present in the study area. Using velocities only considered at formation well tops, as a result, does not completely honour the variation in these velocities. The velocity profile as calculated from the sonic log was characterized into zones representing unique velocity trends. The analyses to understand the impact of subsurface heterogeneities on the velocities was completed by the application of seismic facies analysis which entailed the study of the seismic reflector patterns and amplitudes; a study of the lithologies present and the generation of mineral plots using available wireline logs, all of which in close relation to the variation in velocities. The characterized zones, as a result have shown that shaly sediments are typically associated with higher velocities (~2800 – 4600m/s) compared to sandstones of lower densities. Mineral plots however, have also indicated that where quartz minerals were present (specifically zone L), sandstones as a result have shown higher velocities (~4800m/s) as compared to the shales (~3600m/s). These higher velocities are also associated with more organised seismic reflectors with brighter amplitudes and strong contrasts in acoustic impedance as shown by the seismic. Uniform velocities were observed in zones such as zone Ia, typically associated with a low acoustic impedance contrast and minimal variation in its lithological make-up. The integrated investigation of subsurface heterogeneities has shown that velocities vary to a substantial degree as a result of existing subsurface heterogeneities. The variation of these velocities are hence significant enough that it should be considered when constructing a velocity model which aims to respect the geology of the study area. The result of understanding the relation between the geology and resultant velocities may prove to advance the results of the velocity model in a manner that it is more complete and representative of the subsurface.

Philosophiae Doctor - PhD
Investigation of the acoustic impedance variations in the upper shallow marine sandstone reservoirs was extensively studied from 10 selected wells, namely: F-O1, F-O2, E-M4, E-CN1, E-G1, E-W1, F-A10, F-A11, F-A13, and F-L1 in the Bredasdorp Basin, offshore, South Africa. The studied wells were selected randomly across the upper shallow marine interval with the purpose of conducting a regional study to assess the variations in the acoustic impedance across the reservoirs using wireline log and core data. The datasets used in this study were geophysical wireline logs, conventional core analysis, geological well completion reports, core plugs, and core samples. The physical rock properties such as lithology, fluid type, and hydrocarbon bearing zone were identified while different parameters like the volume of clay, porosity, and water saturation were quantitatively estimated. The reservoirs were penetrated at a different depth ranging from a shallow depth of 2442m at well F-L1 to a deeper depth of 4256.7m at well E-CN1. The average volume of clay, average effective porosity from wireline log, and average water saturation ranged from 8.6%- 43%, 9%- 16% and 12%- 68%, respectively. Porosity distribution was fairly equal across the field from east to west except in well F-A10, F-A13, and F-A11 where a much higher porosity was shown with F-A13 showing the highest average value of 16%. Wells E-CN1, E-W1, F-O1, F-L1 and E-G1 had lower porosity with E-CN1 showing the lowest average value of 9%. The acoustic properties of the reservoirs were determined from geophysical wireline logs in order to calculate acoustic impedance and also investigate factors controlling density and acoustic velocities of these sediments. The acoustic impedance proved to be highest on the central to the western side of the field at E-CN1 with an average value of 11832 g/cm3s whereas, well F-A13 reservoir in the eastern side of the field proved to have the lowest average acoustic impedance of 9821 g/cm3s. There was a good linear negative relationship between acoustic impedance and porosity, compressional velocity vs porosity and porosity vs bulk density. A good linear negative relationship between acoustic impedance and porosity was obtained where the reservoir was homogenous, thick sandstone. However, interbedded shale units within the reservoir appeared to hinder a reliable correlation between acoustic impedance and porosity. The cross-plots results showed that porosity was one of the major factors controlling bulk density, compressional velocity (Vp) and acoustic impedance. The Gassmann equation was used for the determination of the effects of fluid substitution on acoustic properties using rock frame properties. Three fluid substitution models (brine, oil, and gas) were determined for pure sandstones and were used to measure the behaviour of the different sandstone saturations. A significant decrease was observed in Vp when the initial water saturation was substituted with a hydrocarbon (oil or gas) in all the wells. The value of density decreased quite visibly in all the wells when the brine (100% water saturation) was substituted with gas or oil. The fluid substitution affected the rock property significantly. The Vp slightly decreases when brine was substituted with water in wells F-A13, F-A10, F-O2, F-O1 F-A11, F-L1, and E-CN1. Wells E-G1, E-W1, and E-M4 contain oil and gas and therefore showed a notable decrease from brine to oil and from oil to gas respectively. Shear velocity (Vs) remained unaffected in all the wells. The acoustic impedance logs showed a decrease when 100% water saturation was replaced with a hydrocarbon (oil or gas) in all the wells. Clay presence significantly affects the behaviour of the acoustic properties of the reservoir rocks as a function of mineral type, volume, and distribution. The presence of glauconite mineral was observed in all the wells. Thirty-two thin sections, XRD and SEM/EDS from eight out of ten wells were studied to investigate lithology, diagenesis and the effect of mineralogy on porosity and acoustic properties (Compressional velocity and bulk density) within the studied reservoir units. Cementation (calcite and quartz), dissolution, compaction, clay mineral authigenesis, and stylolitization were the most significant diagenetic processes affecting porosity, velocity, and density.Well E-CN1 reservoir quality was very poor due to the destruction of intergranular porosity by extensive quartz and illite cementation, and compaction whereas well F-A13 show a highly porous sandstone reservoir with rounded monocrystalline quartz grain and only clusters of elongate to disc-like, authigenic chlorite crystals partly filling a depression within altered detrital grains. Overall, the results show that the porosity, lithology mineralogy, compaction and pore fluid were the major factors causing the acoustic impedance variations in the upper shallow marine sandstone reservoirs.
2021-09-01

Thesis (MSc)--University of Stellenbosch, 2006.
ENGLISH ABSTRACT: The Barremian to Albian siliciclastic deep-water deposits of the central Bredasdorp Basin were investigated primarily in terms of their stratigraphic evolution, depositional characteristics and facies distribution. Cores from the deep-water deposits reveal that the facies successions are composed of massive, ripple cross- to parallel-laminated sandstones, conglomerate, massive claystone, alternating laminated to interbedded sandstone/siltstone and claystone, laminated and clay-rich siltstone. These facies are grouped into channel-fill, sheet-lobe, overbank and basin plain deposits, by inference. The application of sequence stratigraphy, based on gamma ray and resistivity log patterns, reveals that all 3rd-order depositional sequences comprise 4thorder cycles. The latter are subdivided into three components (lowstand, transgressive and highstand systems tracts), based on vertical facies changes and internal stratigraphic key surfaces. Taking the 13Amfs as the stratigraphic datum for each well, correlation was possible on a regional basis. Lowstand deposits, comprising thick amalgamated massive sandstones, were interpreted to represent channelfills. Their vertical and horizontal stacking forms channel-fill complexes above Type 1 unconformities. Adjacent thin-bedded intervals, comprising parallel- to ripple cross-laminated sandstones, were interpreted as levee/overbank deposits, whereas clay-rich intervals were interpreted to represent basin plain deposits of hemipelagic origin. Facies associations and their distribution have revealed that channel-fills are associated with overflow deposits and sheet sand units. These deposits, as well as downdip sheet sands associated with small channel-fills within the 9A, 11A/12A, 13A Sequences and the 14A Sequence were interpreted to have been deposited in a middle fan to upper fan setting. A similar association occurs in the 10A Sequence, except that thick conglomerate units are present at the base of proximal channel-fills. This led to interpret the 10A Sequence as being deposited in a base-of-slope to upper fan setting. The thickness of each sequence, as revealed by isochore maps, shows sinuous axial flow path which corresponds to channel-fill conduit. The continuous decrease of this sinuosity upward in the succession was interpreted as being related to basin floor control along the main sand fairways. Successive flows result in erosion-fill-spill processes, which locally favour connectivity of reservoirs over large areas. Recognition of higher-order sequences and key stratigraphic surfaces helps to understand internal stratigraphic relationships and reveals a complex and dynamic depositional history for 3rd-order sequences. However, sparse well control and uneven distribution of boreholes, as well as lack of seismic and other data, limited the models derived for this study.
AFRIKAANSE OPSOMMING: Die Barremiaanse tot Albiaanse silisiklastiese diepwater afsettings van die sentrale Bredasdorp Kom is hoofsaaklik in terme van stratigrafiese evolusie, afsettingskarakteristieke en fasies distribusie ondersoek. Kerne van die diepwater afsettings toon dat die fasies opeenvolgings uit massiewe, riffelkruis- tot parallel-gelamineerde sandstene, konglomerate, massiewe kleistene, afwisselende gelamineerde tot intergelaagde sandstene/slikstene en kleistene, sowel as gelamineerde en klei-ryke slikstene bestaan. Hierdie fasies word onderverdeel in kanaalopvulsel, plaatlob, oewerwal en komvlakte afsettings. Die toepassing van opeenvolgingsstratigrafie gebaseer op gammastraal en resistiwiteit log patrone toon dat alle 3de-orde afsettingsopeenvolgings uit 4deorde siklusse bestaan. Laasgenoemde word onderverdeel in drie komponente (lae-stand, transgressie en hoë-stand sisteemgedeeltes), gebaseer op vertikale fasies veranderinge en interne stratigrafiese sleutel vlakke. Korrelasie op ‘n regionale basis is moontlik gemaak deur die 13Amfs as die stratigrafiese verwysing vir elke boorgat te neem. Lae-stand afsettings, wat uit dik saamgevoegde massiewe sandstene bestaan, word geïnterpreteer as kanaalopvulsels. Die vertikale en horisontale stapeling van die sandstene vorm kanaalopvulsel komplekse bo Tipe 1 diskordansies. Naasliggende dungelaagde intervalle, wat uit parallel- tot kruisgelaagde sandstene bestaan, word geïnterpreteer as oewerwal afsettings, terwyl klei-ryke intervalle geïnterpreteer word as verteenwoordigend van komvlakte afsettings van hemipelagiese oorsprong. Fasies assosiasies en hul verspreiding toon dat kanaalvul geassosieër word met oorvloei afsettings en plaatsand eenhede. Hierdie afsettings, sowel as distale plaatsande geassosieër met klein kanaalopvulsels binne die 9A, 11A/12A, 13A en die 14A Opeenvolgings, word geïnterpreteer as afgeset in ‘n middelwaaier tot bo-waaier omgewing. ‘n Soortgelyke assosiasie bestaan in die 10A Opeenvolging, behalwe dat dik konglomeraat eenhede teenwoordig is by die basis van proksimale kanaalopvullings. Dit het gelei tot die interpretasie van die 10A Opeenvolging as afgeset in ‘n basis-van-helling tot bo-waaier omgewing. Die dikte van elke opeenvolging, soos verkry vanaf isochoor kaarte, toon ‘n kronkelende aksiale vloeipad wat ooreenkom met ‘n kanaalopvulling toevoerkanaal. Die aaneenlopende afname van hierdie kronkeling na bo in die opeenvolging word geïnterpreteer as verwant aan komvloer-beheer langs die hoof sand roetes. Opeenvolgende vloeie veroorsaak erosie-opvul-oorspoel prosesse, wat lokaal die konnektiwiteit van reservoirs oor groot areas bevoordeel. Herkenning van hoër-orde opeenvolgings en sleutel stratigrafiese vlakke dra by tot ‘n goeie begrip van die interne stratigrafiese verhoudings en ontbloot ‘n komplekse en dinamiese afsettingsgeskiedenis vir 3de-orde opeenvolgings. Beperkte boorgatbeheer en ‘n tekort aan seismiese en ander data het egter ‘n beperkende rol gespeel in die daarstel van modelle vir hierdie studie.

In the petroleum industry, the location of a new well is selected based on several factors, one of which is the presence of reservoir-quality sands. To determine the lateral extent of these sands away from well control, the depositional environment and character of the deposit must be adequately identified. This study aims to explain the physical controls on the deposition of the 13A (Aptian) and 14A (Albian) sequence sands within the deep water region of the Central Bredasdorp Basin through identifying the mass transport facies and processes and relating these to tectono-eustatic factors. Since a primarily seismic-based approach was used to achieve the project objective, the results reflect findings based on 3D seismic data interpretations as well as seismic surface and volume attribute extraction supported by wireline well logs and well completion reports. This dataset contains information that enabled the identification of the structural and stratigraphic architecture of the 13A and 14A sequences as a whole, the location of the sediment provenances and possible triggers of the mass flows as well as the consequential sand distribution trends from the basin slopes to across the basin floor during the Aptian-Albian time. The onshore Tankwa Basin was studied as an analogue to the Bredasdorp Basin because it hosts world class outcrops of deep water lowstand fan deposits and therefore shows the finer-scale details of the associated depositional stratigraphy. The 13A and 14A sequence sands would have entered the Bredasdorp Basin in progradational pulses alternating with mud-rich successions associated with local sea level fluctuations that were on trend with the gradual global sea level rise from the Aptian to the Albian. These alternating successions are identified as lowstand, transgressive and highstand systems tracts in the seismic and wireline well log data used in this study. The presented depositional model of the 13A sequence sands is a system of northwest to southeast sediment transport across the Central Bredasdorp Basin with indications of a final swing in orientation towards the east. The sands were mainly sourced from the paleo shelf edge on the northwest margin, although additional sediment input may have come from the west too. The faults that were active before and during the deposition of the Aptian-aged (13A) sands appear to have been the main control on sand distribution across the basin, guiding the sands from slope channels into basin floor fans and from shelf edge slumps into base of slope fans in a basinwide northwestsoutheast trend. The model of deposition of the 14A sequence sands is based on a channelised flow of sediment from the Central Bredasdorp Basin paleo shelf edge, down the slope and onto the basin floor primarily from the onshore source on the western margin. Supplementary sediment input may have originated from the Agulhas basement high on the southern margin of the basin in the form of less confined channels and mass wasting deposits. Inherited topography of the sea floor at the Albian time appears to have been the primary control on 14A sand distribution, causing bypass zones and giving rise to narrow, confined channel complexes despite some of the active faults possibly redirecting some of the sands from their initial trend. Overall the pattern of deposition of the Aptian and Albian deep water sands in the Bredasdorp Basin appears to have been physically controlled by the regional paleo seabed topography and fault activity until the late Aptian.

>Magister Scientiae - MSc
The burial history, thermal maturity and petroleum generation history of the F-O Gas Field, Bredasdorp Basin have been studied using 3D basin and petroleum systems modelling approach. The investigated sedimentary basin for this study evolved around mid-late Jurassic to early Cretaceous times when Southern Africa rifted from South America. The F-O field is located 40 km SE of the F-A platform which supplies gas and condensate to the PetroSA ‘Gas to Liquid’ plant located in Mossel Bay. As data integration is an integral part of the applied modelling concept, 2D seismic profile and well data (i.e. logs and reports from four drilled wells) were integrated into a 3D structural model of the basin. Four source rock intervals (three from the Early Cretaceous stages namely; Hauterivian, Barremian, Aptian and one from the Late Cretaceous Turonian stage) were incorporated into the 3D model for evaluating source rock maturation and petroleum generation potential of the F-O Gas Field. Additionally, measured present-day temperature, vitrinite reflectance, source potential data, basin burial and thermal history and timing of source rock maturation, petroleum generation and expulsion were forwardly simulated using a 3D basin modelling technique. At present-day, Turonian source rock is mainly in early oil (0.55-0.7% VRo) window, while the Aptian and Barremian source rocks are in the main oil (0.7-1.0% VRo) window, and the Hauterivian source rock is mainly in the main oil (0.7-1.0% VRo) to late oil (1.0-1.3% VRo) window. In the entire four source rock intervals the northern domain of the modelled area show low transformation, indicated by low maturity values that are attributable to less overburden thickness. Petroleum generation begins in later part of Early Cretaceous, corresponding to high heat flow and rapid subsidence/ sedimentation rates. The Barremian and Aptian source rocks are the main petroleum generators, and both shows very high expulsion efficiencies. The modelling results however indicate that the younger Aptian source rock could be regarded as the best source rock out of the four modelled source rocks in the F-O field due to its quantity (i.e. highest TOC of 3%), quality (Type II with HI values of 400) and highest remaining potential. At present-day, ~1209 Mtons of hydrocarbons were cumulatively generated and peak generation occurred at ~43 Ma with over 581 Mtons generated. Finally, the results of this study can directly be applied for play to prospect risk analysis of the F-O gas field.

This study is aimed at developing a workflow for quantitative seismic interpretation. The workflow generated probability maps of various facies and pore-fluid by combining seismic attributes and wireline log data through rock physics relationships and supervised statistical classification. The workflow was developed mainly for hydrocarbon exploration, but could be used for other purposes, provided the target is seismically detectible. Any prior regional geological knowledge is built into the workflow, by extending the training date appropriately. The workflow aims to maximize the extraction of quantitative geological parameters from data that are most commonly acquired for hydrocarbon exploration, namely seismic and wireline log data. The workflow is presented using 3D seismic data from the Bredasdorp Basin offshore South Africa's south-coast. Wireline log data from the E-BX1 borehole are also used in the study, as well as regional geological interpretations. The study focused on the siliciclastic Aptian "13B" sequence, which was encountered at a depth of 2500 m below sea level at borehole E-BX1. Two massive 13B sandstone units were encountered at E-BX1. The lower unit is 50 m, and the upper 20 m thick. Both are water wet. The results of this study suggest that there are two oil accumulations at the 13X level around E-BX1. This is indicated by the high probability predicted for oil-bearing sandstone in these two areas.

Philosophiae Doctor - PhD
The use of integrated approach to evaluate the quality of reservoir rocks is increasingly becoming vital in petroleum geoscience. This approach was employed to unravel the reason for the erratic reservoir quality of sandstones of the F-O gas field with the aim of predicting reservoir quality, evaluate the samples for presence, distribution and character of hydrocarbon inclusions so as to gain a better understanding of the fluid history. Information on the chemical conditions of diagenetic processes is commonly preserved in aqueous and oil fluid inclusion occurring in petroleum reservoir cements. Diagenesis plays a vital role in preserving, creating, or destroying porosity and permeability, while the awareness of the type of trap(s) prior to drilling serves as input for appropriate drilling designs. Thus an in-depth understanding of diagenetic histories and trap mechanisms of potential reservoirs are of paramount interest during exploration stage.This research work focused on the F-O tract located in the eastern part of Block 9 on the north-eastern flank of the Bredasdorp Basin, a sub-basin of Outeniqua Basin on the southern continental shelf, offshore South Africa. The Bredasdorp Basin experienced an onset of rifting during the Middle-Late Jurassic as a result of dextral trans-tensional stress produced by the breakup of Gondwanaland that occurred in the east of the Falkland Plateau and the Mozambique Ridge. This phenomenon initiated a normal faulting, north of the Agulhas-Falkland fracture zone followed by a widespread uplift of major bounding arches within the horst blocks in the region that enhanced an erosion of lower Valanginian drift to onset second order unconformity.This study considered 52 selected reservoir core samples from six wells(F-O1, F-O2, F-O3, F-O4, F-R1 and F-S1) in the F-O field of Bredasdorp Basin with attention on the Valanginian age sandstone. An integrated approach incorporating detailed core descriptions, wireline log analysis (using Interactive petrophysics), structural interpretation from 2D seismic lines (using SMT software) cutting across all the six wells, multi-mineral (thin section, SEM,XRD) analyses, geochemical (immobile fluid and XRF) and fluid inclusion(fluid inclusion petrography and bulk volatile) analyses were deployed for the execution of this study. Core description revealed six facies from the six wells grading from pure shale (Facies 1), through progressively coarsening interbedded sand-shale “heterolithic facies (Facies 2 - 4), to cross bedded and minor massive sandstone (Facies 5 - 6). Sedimentary structures and mineral patches varies from well to well with bioturbation, synaeresis crack, echinoid fragments, fossil burrow, foreset mudrapes, glauconite and siderite as the main observed features. All these indicate that the Valanginian reservoir section in the studied wells was deposited in the upper shallow marine settings. A combination of wireline logs were used to delineate the reservoir zone prior to core description. The principal reservoirs are tight, highly faulted Valanginian shallow-marine sandstones beneath the drift-onset unconformity, 1At1 and were deposited as an extensive sandstone “sheet” within a tidal setting. The top and base of the reservoir are defined by the 13At1 and 1At1 seismic events,respectively. This heterogeneous reservoir sandstones present low-fair porosity of between 2 to 18 % and a low-fair permeability value greater than 0.1 to 10 mD. The evolution of the F-O field was found to be controlled by extensional events owing to series of interpreted listric normal faults and rifting or graben generated possibly by the opening of the Atlantic. The field is on a well-defined structural high at the level of the regional drift-onset unconformity, 1At1.Multi-mineral analysis reveals the presence of quartz and kaolinite as the major porosity and permeability constraint respectively along with micaceous phases. The distribution of quartz and feldspar overgrowth and crystals vary from formation to formation and from bed to bed within the same structure. The increase in temperature that led to kaolinite formation could have triggered the low-porosity observed. Three types of kaolinite were recognized in the sandstone, (1) kaolinite growing in between expanded mica flakes; (2)vermiform kaolinite; and (3) euhedral kaolinite crystals forming matrix.Compositional study of the upper shallow marine sandstones in the Valanginian age indicates that the sandstones are geochemically classified as majorly litharenite having few F-O2 samples as subarkose with all F-O1 samples classified as sub-litharenite sandstone.Most of the studied wells are more of wet gas, characterized by strong response of C2 – C5 with F-O1 well showing more of gas condensate with oil shows (C7 – C11) based on the number of carbon atom present. In some cases,sulphur species (characterized by the presence of H2S, S2, CS2 and SO2) of probably thermal origin were identified while some log signatures revealed aromatic enriched sandstones possibly detecting nearby gas charges. The studied wells in the F-O field, based on fluid inclusion bulk volatile analysis are classified as gas discoveries except for F-O1 with gas condensate and oil shows.The integration of multi-mineral results and fluid inclusion studies show a dead oil stain with no visible liquid petroleum inclusion in the samples indicating the presence of quartz, kaolinite and stylolite as a major poro-perm constraint.

>Magister Scientiae - MSc
The thesis aims to determine the depositional environments, rock types and petrophysical characteristics of the reservoirs in Wells E-S3, E-S5 and F-AH4 of Area X in the Bredasdorp Basin, offshore South Africa. The three wells were studied using methods including core description, petrophysical analysis, seismic facies and multivariate statistics in order to evaluate their reservoir potential. The thesis includes digital wireline log signatures, 2D seismic data, well data and core analysis from selected depths. Based on core description, five lithofacies were identified as claystone (HM1), fine to coarse grained sandstone (HM2), very fine to medium grained sandstone (HM3), fine to medium grained sandstone (HM4) and conglomerate (HM5). Deltaic and shallow marine depositional environments were also interpreted from the core description based on the sedimentary structures and ichnofossils. The results obtained from the petrophysical analysis indicate that the sandstone reservoirs show a relatively fair to good porosity (range 13-20 %), water saturation (range 17-45 %) and a predicted permeability (range 4- 108 mD) for Wells E-S3, E-S5 andF-AH4. The seismic facies model of the study area shows five seismic facies described as parallel, variable amplitude variable continuity, semi-continuous high amplitude, divergent variable amplitude and chaotic seismic facies as well as a probable shallow marine, deltaic and submarine fan depositional system. Linking lithofacies to seismic facies maps helped to understand and predict the distribution and quality of reservoir packages in the studied wells

The primary focus of this dissertation is to develop a predictive rock physics theory that establishes relations between rock properties and the observed seismic and to present the results of different seismic characterization techniques to interpret a tight gas sand reservoir off the south coast of South Africa using as input rock physics analysis and inverted seismic outcomes. To perform the aims and goals of this study a workflow that involves the execution of three main processes was implemented: (1) rock physics modelling, (2) a simultaneous seismic inversion, and (3) seismic reservoir characterization techniques. First, a rock physics model was generated as a bridge between the seismic observables (density, Vp and Vs) and reservoir parameters such as fluid content, porosity and mineralogy. In situ and perturbational log - derived forward modelling was performed. Both in situ and perturbational forward modelling were used to generate synthetic seismic gathers, which were used to study the AVA attribute responses. Overall, the effect of fluid fill on this tight gas sand seismically is modest compared with the effect of porosity changes. Second, there follows a detailed description of a workflow implemented to simultaneously invert P and S pre - stack seismic data. The derived elastic properties (acoustic impedance, Vp/Vs and density) were then used in combination with the rock physics analysis to characterize seismically the reservoir. The predicted acoustic impedance and Vp/Vs volumes show a good tie with the log data. However, the density outcome was of limited quality compared with the two mentioned above. Finally, using outcomes from rock physic s analysis and/or inverted data, four seismic techniques to characterize the reservoir were conducted. The techniques involved are: (1) AVO cross - plotting to generate a good facies property based on AVO attributes (intercept - gradient) and rock physics in the area of study , (2) rock physics templates (RPTs) to compute discrete rock property volumes (litho - Sw, litho - porosity) using a collection of curves that cover all possible "what if" lithology - fluid content - porosity scenarios for the reservoir and the inverted data, (3) a lithological classification to calculate litho - facies probability volumes based on a litho - facies classification using petrophysical cut - off s , multivariate probability functions (PDFs) and inverted data, and (4) an extended elastic impedance (EEI) inversion to derive rock property volumes (Vclay, porosity) based on AVO attributes (intercept, gradient). Despite differences in the input and theory behind each technique, all outcomes share parallels in the distribution of good and poor facies or reservoir and non - reservoir zones.

>Magister Scientiae - MSc
An accurate prediction of pore pressure is an essential in reducing the risk involved in a well or field life cycle. This has formed an integral part of routine work for exploration, development and exploitation team in the oil and gas industries. Several factors such as sediment compaction, overburden, lithology characteristic, hydrocarbon pressure and capillary entry pressure contribute significantly to the cause of overpressure. Hence, understanding the dynamics associated with the above factors will certainly reduce the risk involved in drilling and production. This study examined three deep water drilled wells GA-W1, GA-N1, and GA-AA1 of lower cretaceous Hauterivian to early Aptian age between 112 to 117.5 (MA) Southern Pletmos sub-basin, Bredasdorp basin offshore South Africa. The study aimed to determine the pore pressure prediction of the reservoir formation of the wells. Eaton’s resistivity and Sonic method are adopted using depth dependent normal compaction trendline (NCT) has been carried out for this study. The variation of the overburden gradient (OBG), the Effective stress, Fracture gradient (FG), Fracture pressure (FP), Pore pressure gradient (PPG) and the predicted pore pressure (PPP) have been studied for the selected wells. The overburden changes slightly as follow: 2.09g/cm3, 2.23g/cm3 and 2.24g/cm3 across the selected intervals depth of wells. The predicted pore pressure calculated for the intervals depth of selected wells GA-W1, GA-N1 and GA-AA1 also varies slightly down the depths as follow: 3,405 psi, 4,110 psi, 5,062 psi respectively. The overpressure zone and normal pressure zone were encountered in well GA-W1, while a normal pressure zone was experienced in both well GA-N1 and GA-AA1. In addition, the direct hydrocarbon indicator (DHI) was carried out by method of post-stack amplitude analysis seismic reflectors surface which was used to determine the hydrocarbon prospect zone of the wells from the seismic section. It majorly indicate the zones of thick hydrocarbon sand from the amplitude extraction grid map horizon reflectors at 13AT1 & 8AT1 and 8AT1 & 1AT1 of the well GA-W1, GA-N1 and GA-AA1 respectively. These are suggested to be the hydrocarbon prospect locations (wet-gas to Oil prone source) on the seismic section with fault trending along the horizons. No bright spot, flat spot and dim spot was observed except for some related pitfalls anomalies

Magister Scientiae - MSc
Pressure drop within a field can be attributed to several factors. Pressure drop occurs when fractional forces cause resistance to flowing fluid through a porous medium. In this thesis, the sciences of petrophysics and rock physics were employed to develop understanding of the physical processes that occurs in reservoirs. This study focussed on the physical properties of rock and fluid in order to provide understanding of the system and the mechanism controlling its behaviour. The change in production capacity of wells E-M 1, 2, 3, 4&5 prompted further research to find out why the there will be pressure drop from the suits of wells and which well was contributing to the drop in production pressure. The E-M wells are located in the Bredasdorp Basin and the reservoirs have trapping mechanisms of stratigraphical and structural systems in a moderate to good quality turbidite channel sandstone. The basin is predominantly an elongated north-west and south-east inherited channel from the synrift sub basin and was open to relatively free marine circulation. By the southwest the basin is enclose by southern Outeniqua basin and the Indian oceans. Sedimentation into the Bredasdorp basin thus occurred predominantly down the axis of the basin with main input direction from the west. Five wells were studied E-M1, E-M2, E-M3, E-M4, and E-M5 to identify which well is susceptible to flow within this group. Setting criteria for discriminator the result generated four well as meeting the criteria except for E-M1. The failure of E-M1 reservoir well interval was in consonant with result showed by evaluation from the log, pressure and rock physics analyses for E-M1.iv Various methods in rock physics were used to identify sediments and their conditions and by applying inverse modelling (elastic impedance) the interval properties were better reflected. Also elastic impedance proved to be an economical and quicker method in describing the lithology and depositional environment in the absence of seismic trace.