Academic literature on the topic 'Broaching machines Finite element method. Strength of materials'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Broaching machines Finite element method. Strength of materials.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Broaching machines Finite element method. Strength of materials"

1

Evangelos, Rizos. "Nanostructured Magnetic Materials for Applications in Electrical Machines." Key Engineering Materials 605 (April 2014): 669–72. http://dx.doi.org/10.4028/www.scientific.net/kem.605.669.

Full text
Abstract:
The aim of this survey is to design a low energy production wind generator for home or small industrial use, with short blades or different structure. Magnetic materials such as strontium hexaferrites and Nd-Fe-B composites are used in form of plastic bonded magnetic powder or laminas in the rotor and amorphous material or silicon steel in the stator. The envisaged machines are switched reluctance and permanent magnet, while preferable structure is this of vertical axis. Before the construction, both inside and outside rotor design machines, also toroidal stators can be tested, using finite el
APA, Harvard, Vancouver, ISO, and other styles
2

Khan, Faisal, Erwan Sulaiman, Hassan Ali Soomro, Fairoz Omar, and Zarafi Ahmad. "Analysis of 24Slot wound field salient rotor switched-flux machine based on 2D-FEA." World Journal of Engineering 13, no. 5 (2016): 381–85. http://dx.doi.org/10.1108/wje-08-2016-0058.

Full text
Abstract:
Purpose The paper aims to propose and compare two new structures of a three-phase wound field salient rotor (WFSR) switched-flux motor (SFM) with 24 stator slots and 10 or 14 rotor poles, respectively, for high-speed operation. Design/methodology/approach The paper outlines the motor general construction and design concept of proposed machines. Flux linkage, average torque, rotor mechanical strength and torque–speed characteristics of both machines were analyzed and compared by two-dimensional finite element analysis (2D-FEA). Deterministic optimization method was adopted to enhance the charac
APA, Harvard, Vancouver, ISO, and other styles
3

Warguła, Łukasz, Dominik Wojtkowiak, Mateusz Kukla, and Krzysztof Talaśka. "Symmetric Nature of Stress Distribution in the Elastic-Plastic Range of Pinus L. Pine Wood Samples Determined Experimentally and Using the Finite Element Method (FEM)." Symmetry 13, no. 1 (2020): 39. http://dx.doi.org/10.3390/sym13010039.

Full text
Abstract:
This article presents the results of experimental research on the mechanical properties of pine wood (Pinus L. Sp. Pl. 1000. 1753). In the course of the research process, stress-strain curves were determined for cases of tensile, compression and shear of standardized shapes samples. The collected data set was used to determine several material constants such as: modulus of elasticity, shear modulus or yield point. The aim of the research was to determine the material properties necessary to develop the model used in the finite element analysis (FEM), which demonstrates the symmetrical nature o
APA, Harvard, Vancouver, ISO, and other styles
4

Jonak, Józef, Robert Karpiński, Michał Siegmund, Andrzej Wójcik, and Kamil Jonak. "Analysis of the Rock Failure Cone Size Relative to the Group Effect from a Triangular Anchorage System." Materials 13, no. 20 (2020): 4657. http://dx.doi.org/10.3390/ma13204657.

Full text
Abstract:
This study employs the numerical analysis and experimental testing to analyze the fracturing mechanics and the size of rock cones formed in the pull-out of a system of three undercut anchors. The research sets out to broaden the knowledge regarding: (a) the potential of the undercut anchor pull-out process in mining of the rock mass, and (b) estimating the load-carrying capacity of anchors embedded in the rock mass (which is distinctly different from the anchorage to concrete). Undercut anchors are most commonly applied as fasteners of steel components in concrete structures. The new applicati
APA, Harvard, Vancouver, ISO, and other styles
5

"Stress Analysis of IBS Molding Machine." International Journal of Recent Technology and Engineering 8, no. 3 (2019): 2427–31. http://dx.doi.org/10.35940/ijrte.c4677.098319.

Full text
Abstract:
Home is a place for shelter and survival for every living thing. These residential buildings are made using materials, one of which is brick. The technology of making bricks continues to grow over time. At present, bricks have been made using machines that use modern methods with the Interlocking Brick System (IBS) model. This molding machine using pneumatic to press the clay in the mold to becomes an IBS. This study aimed to determine the structural strength of the IBS printing press when given a load when printing is carried out. This research also serves to determine the most vulnerable loc
APA, Harvard, Vancouver, ISO, and other styles
6

R R, Akshar Viruppan, Athiyaman S K, Deepak Kumar M, and Gokul Ram D. "Design and Analysis of Spur Gear Using Composite Material." International Journal of Advanced Research in Science, Communication and Technology, July 11, 2021, 504–38. http://dx.doi.org/10.48175/ijarsct-1664.

Full text
Abstract:
Spur gears are the simplest and widely used in power transmission. In recent years it is required to operate machines at varying load and speed. Gear teeth normally fail when load is increased above certain limit. Therefore, it is required to explore alternate materials for gear manufacturing. Composite materials provide adequate strength with weight reduction and they have emerged as a better alternative for replacing metallic gears. Composites provide much improved mechanical properties such as better strength to weight ratio, more hardness, and hence less chances of failure. So, this work i
APA, Harvard, Vancouver, ISO, and other styles
7

"Modelling of Nanoindentation of TiAlN and TiN Thin Film Coatings for Automotive Bearing." International Journal of Recent Technology and Engineering 8, no. 3 (2019): 7194–99. http://dx.doi.org/10.35940/ijrte.c6208.098319.

Full text
Abstract:
Bearings are critical components for the transmission of motion in machines. Automotive components, especially bearings, will wear out over a certain period of time because they are constantly subjected to high levels of stress and friction. Studies have proven that coatings can extend the lifespan of bearings. Hence, it is necessary to conduct studies on coatings for bearings, particularly the mechanical and wear properties of the coating material. This detailed study focused on the mechanical properties of single-coatings of TiN and TiAIN using the finite element method (FEM). The mechanical
APA, Harvard, Vancouver, ISO, and other styles
8

"An Analytic Verification on Fracture Behavior of Adhesion Exfoliation with Out-plane Shear Mode due to Tapered Angles of 6°and 8° at TDCB Made of Unidirectional Laminated CFRP." International Journal of Recent Technology and Engineering 8, no. 2S6 (2019): 185–89. http://dx.doi.org/10.35940/ijrte.b1035.0782s619.

Full text
Abstract:
Because of environmental issues, the regulations on gas emission from fossil fuels become stricter. Some investigations are being carried out actively to change the fossil fuel power into electrical power. Researches on the reduction of weight in the transportation machine is also executed. Weight reduction is one of the methods of reducing the gas emission and increasing the range of electrically powered machines. The method of weight reduction includes the development of light weight material and light weight structure design method. FRP is the most representative light weight material. Amon
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Broaching machines Finite element method. Strength of materials"

1

Rajam, Sham Kumar. "Design and finite element analysis of the broaching tools." Ohio : Ohio University, 1997. http://www.ohiolink.edu/etd/view.cgi?ohiou1177014495.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Elmaraghi, Omar A. "Integrated multibody dynamics and fatigue models for predicting the fatigue life of poly-V ribbed belts." Thesis, 2013. http://hdl.handle.net/1805/3691.

Full text
Abstract:
Indiana University-Purdue University Indianapolis (IUPUI)<br>Belt-drives are used in many applications such as industrial machines, washing ‎machines, and accessory drives for automobiles and other vehicles. Multibody dynamics/finite ‎element numerical models have become an effective way to predict the dynamic response of ‎belt-drives. In this thesis, a high fidelity numerical model was built using a multibody ‎dynamics/finite element code to simulate a belt-drive. The belt-drive transmits power from a ‎turbine of a Rankin cycle (that uses the exhaust waste heat of the internal combustion engi
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!