Relevant bibliographies by topics / Bsdiff

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Conference papers
  5. Reports

Academic literature on the topic 'Bsdiff'

Author: Grafiati
Published: 4 June 2021
Last updated: 3 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Bsdiff.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Bsdiff"

1

Kroneberger, Monika, Andreas Mezger, and Stephanie Becker. "Stray light and ghosts in catadioptric spectrometers: incorporating grating scatter measurements into simulations and ghost sensitivity into system design." Advanced Optical Technologies 7, no. 6 (December 19, 2018): 377–86. http://dx.doi.org/10.1515/aot-2018-0039.

Full text
Abstract:
Abstract The accurate simulation of stray light is essential for the verification of the contrast requirements in optical instruments. In a spectrometer, the scattering from reflective gratings is difficult to characterize while contributing significantly to the overall system stray light and reduction of the spectrometer contrast. In addition, the multiple diffraction orders create a ghost sensitive environment, which must be considered in the design of the instrument. In this article, we present an experimental setup for, and measurement results from, the characterization of the bidirectional scattering distribution function (BSDF) of a holographic grating for a spectrometer applied in a typical earth observation mission with demanding stray light requirements. We observed distinct stray light peaks out of the diffraction plane, which are called ‘satellites.’ The main challenges in the measurement of grating BSDFs arise from the near angle limit, the determination of the instrument signature and the selection of the appropriate sampling (2D or 3D). Following the grating characterization, the next step is to introduce these measured BSDFs into stray light simulation. We have done that by fitting appropriate functions to the measured BSDF and defining them in the optical analysis software ASAP as a user-defined BSDF. Ghost analysis is done at the spectrometer level as a sensitivity analysis of the tilts of the optical elements. Due to the ghosting of higher diffraction orders of the grating, a high sensitivity to the tilts of some of the optical elements can be seen.
APA, Harvard, Vancouver, ISO, and other styles
2

Sciochetti, Stephen A., Patrick J. Piggot, and Garry W. Blakely. "Identification and Characterization of thedif Site from Bacillus subtilis." Journal of Bacteriology 183, no. 3 (February 1, 2001): 1058–68. http://dx.doi.org/10.1128/jb.183.3.1058-1068.2001.

Full text
Abstract:
ABSTRACT Bacteria with circular chromosomes have evolved systems that ensure multimeric chromosomes, formed by homologous recombination between sister chromosomes during DNA replication, are resolved to monomers prior to cell division. The chromosome dimer resolution process inEscherichia coli is mediated by two tyrosine family site-specific recombinases, XerC and XerD, and requires septal localization of the division protein FtsK. The Xer recombinases act near the terminus of chromosome replication at a site known asdif (Ecdif). In Bacillus subtilisthe RipX and CodV site-specific recombinases have been implicated in an analogous reaction. We present here genetic and biochemical evidence that a 28-bp sequence of DNA (Bsdif), lying 6° counterclockwise from the B. subtilis terminus of replication (172°), is the site at which RipX and CodV catalyze site-specific recombination reactions required for normal chromosome partitioning. Bsdif in vivo recombination did not require the B. subtilis FtsK homologues, SpoIIIE and YtpT. We also show that the presence or absence of the B. subtilisSPβ-bacteriophage, and in particular its yopP gene product, appears to strongly modulate the extent of the partitioning defects seen in codV strains and, to a lesser extent, those seen in ripX and dif strains.
APA, Harvard, Vancouver, ISO, and other styles
3

Ershov, Sergei V., Dmitry D. Zhdanov, and Alexei G. Voloboy. "The Method Of Quasi-specular Elements To Reduce Stochastic Noise During Illuminance Simulation." Light & Engineering, no. 05-2020 (October 2020): 39–47. http://dx.doi.org/10.33383/2019-103.

Full text
Abstract:
When simulating the propagation of light, luminance/ radiance brought by a ray is calculated from the optical properties of the scene objects it interacts with. According to their optical properties, objects can be roughly divided into diffuse and specular. In Monte Carlo ray tracing luminance/radiance is calculated only for diffuse surfaces. When a ray hits a specular a surface, it is reflected (or refracted) until it reaches a diffuse surface, and only then the luminance/radiance is calculated. In the proposed approach, diffuse elements are further divided into genuine diffuse and quasi-specular elements. The most natural criterion for the latter is that it scatters light in a narrow cone about the specular direction. An element of the scene can also be a superposition of both types when its scattering function is a sum of the genuine diffuse and quasi-specular parts. This article shows how different components of illuminance/irradiance interact with quasi-specular objects and describe how this works in the bi-directional stochastic ray tracing. The proposed approach significantly reduces stochastic noise for multiple scenes. This method is also applicable for simulation of volume scattering, treating the phase function of the medium as quasi-specular. In this case, the choice of quasi-specular objects is not based on the nature of the bidirectional scattering distribution function (BSDF): the medium is treated as completely quasi-specular while the surfaces, even if their BSDFs are narrower, remain genuine diffuse. The article shows the advantage of this approach.
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Ke, Jun-Ya Liu, Lei Fu, Ying-Ying Zhao, He Zhu, Yan-Yan Zhang, Hua Zhang, and Yan-Hong Bai. "Effect of bamboo shoot dietary fiber on gel properties, microstructure and water distribution of pork meat batters." Asian-Australasian Journal of Animal Sciences 33, no. 7 (July 1, 2020): 1180–90. http://dx.doi.org/10.5713/ajas.19.0215.

Full text
Abstract:
Objective: To develop healthier comminuted meat products to meet consumer demand, the gel properties, rheological properties, microstructure and water distribution of pork meat batters formulated with various amounts of bamboo shoot dietary fiber (BSDF) were investigated.Methods: Different levels of BSDF (0% to 4%) were added to pork batters, and the pH, color, water-holding capacity, texture and rheological properties of pork batters were determined. Then, pork batters were analyzed for their microstructure and water distribution using scanning electron microscopy (SEM) and low-field nuclear magnetic resonance (LF-NMR).Results: Compared with the control, BSDF addition into meat batters showed a significant reduction in L*-value and a significant increase in b*-value (p<0.05). BSDF addition of up to 4% reduced the pH value of pork batters by approximately 0.15 units; however, the cooking loss and expressible water loss decreased significantly (p<0.05) with the increased addition of BSDF. The hardness and gel strength were noticeably enhanced (p<0.05) as the content of BSDF increased. The rheological results showed that BSDF added into pork batters produced higher storage modulus (G′) and loss modulus (G″) values. The SEM images suggested that the addition of BSDF could promote pork batters to form a more uniform and compact microstructure. The proportion of immobilized water increased significantly (p<0.05), while the population of free water was decreased (p<0.05), indicating that BSDF improved the water-holding capability of pork batters by decreasing the fraction of free water.Conclusion: BSDF could improve the gel properties, rheological properties and water distribution of pork meat batters and decrease the proportion of free water, suggesting that BSDF has great potential as an effective binder in comminuted meat products.
APA, Harvard, Vancouver, ISO, and other styles
5

Zhang, Hua, Yanyan Zhang, Xintian Wang, Qisen Xiang, Yanhong Bai, Suyun Li, and Lixin Yang. "Effects of Bamboo Shoot Dietary Fiber on Mechanical Properties, Moisture Distribution, and Microstructure of Frozen Dough." Journal of Chemistry 2017 (2017): 1–7. http://dx.doi.org/10.1155/2017/4513410.

Full text
Abstract:
In this paper, the effects of Bamboo shoot dietary fiber (BSDF) on the mechanical properties, moisture distribution, and microstructure of frozen dough were investigated. The state and distribution of water in frozen dough was determined by differential scanning calorimetry (DSC) and low-field nuclear magnetic resonance (LNMR) spectroscopy. The microstructure of frozen dough was studied. The structure of the gluten protein network found in wheat flour dough was studied by scanning electron microscopy (SEM). The result showed that the BSDF could significantly improve the viscoelasticity and extensibility of frozen dough after thawing in a dose-dependent manner. It was significantly improved with the increase in the addition amount of BSDF (P<0.05). DSC analysis showed that the freezable water content and thermal stability of frozen dough were increased after the addition of BSDF. LNMR analysis showed that the appropriate (<0.1%) addition amount of BSDF could significantly (P<0.05) decline the contents of bound water. Meanwhile, the loose bound water and free water were raised significantly (P<0.05) after the addition of BSDF. Moreover, the addition of BSDF induces arrangement of starch granule and gluten network in frozen dough. BSDF can be used as a novel quality improver of frozen dough.
APA, Harvard, Vancouver, ISO, and other styles
6

Ribardière, Mickaël, Benjamin Bringier, Lionel Simonot, and Daniel Meneveaux. "Microfacet BSDFs Generated from NDFs and Explicit Microgeometry." ACM Transactions on Graphics 38, no. 5 (November 5, 2019): 1–15. http://dx.doi.org/10.1145/3338697.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Heitz, Eric, Johannes Hanika, Eugene d'Eon, and Carsten Dachsbacher. "Multiple-scattering microfacet BSDFs with the Smith model." ACM Transactions on Graphics 35, no. 4 (July 11, 2016): 1–14. http://dx.doi.org/10.1145/2897824.2925943.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

von Finck, A., M. Trost, S. Schröder, and A. Duparré. "Parallelized multichannel BSDF measurements." Optics Express 23, no. 26 (December 18, 2015): 33493. http://dx.doi.org/10.1364/oe.23.033493.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Zhao, Minjie, Fuqi Si, Haijin Zhou, Yu Jiang, Chunyan Ji, Shimei Wang, Kai Zhan, and Wenqing Liu. "Pre-Launch Radiometric Characterization of EMI-2 on the GaoFen-5 Series of Satellites." Remote Sensing 13, no. 14 (July 20, 2021): 2843. http://dx.doi.org/10.3390/rs13142843.

Full text
Abstract:
The environmental trace gas monitoring instrument (EMI) is a space-borne imaging spectrometer onboard GaoFen-5, which was launched in May 2018, covering wavelengths in the range of 240–710 nm to measure NO2, O3, HCHO, and SO2. An advanced EMI-2 instrument with a higher spatial resolution and sufficient signal-to-noise is currently planned for launch on the GaoFen-5(02) satellite in 2021. The EMI-2 instrument bidirectional scattering distribution function (BSDF) is obtained from the absolute irradiance and radiance calibration on-ground. Based on EMI-2 earth and sun optical paths, the key factors of BSDF parameters are introduced. An NIST-calibrated 1000 W FEL quartz tungsten halogen lamp and a 2D turntable are adopted for the absolute irradiance calibration. A large aperture integrating sphere system is used for the absolute radiance calibration. Based on absolute irradiance and radiance calibration functions, the BSDF parameters are obtained, with accuracy of 4.9% for UV1, 4.3% for UV2, 4.1% for VIS1, and 4.2% for VIS2. The on-ground measurement results show that the reflectance spectrum can be calculated from BSDF parameters. On-orbit application of the EMI-2 instrument BSDF are also discussed.
APA, Harvard, Vancouver, ISO, and other styles
10

Guo, Yu, Miloš Hašan, and Shuang Zhao. "Position-free monte carlo simulation for arbitrary layered BSDFs." ACM Transactions on Graphics 37, no. 6 (January 10, 2019): 1–14. http://dx.doi.org/10.1145/3272127.3275053.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Bsdiff"

1

Westerberg, Ellinor. "Efficient delta based updates for read-only filesystem images : An applied study in how to efficiently update the software of an ECU." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-291740.

Full text
Abstract:
This thesis investigates a method for efficiently updating the software of an Electronic Control Unit (ECU) in a car. The patch sent to the car should be as small as possible and optimally only contained the changed part of the software. A popular algorithm for creating the patch is bsdiff. However, it is not made for filesystem images, but for binaries. Therefore, an alternative is investigated. The alternative algorithm method is based on the update engine in Android. A standalone version of the Android A/B Update is implemented and compared to bsdiff, in the aspect of the time it takes to generate the patch and the size of the patch. The result shows that bsdiff generates a slightly smaller patch. However, bsdiff is also a lot slower at generating the patch. Furthermore, the time increases linearithmic with the size of the filesystem image. This gives reason to believe that the Android A/B Update algorithm might be a better solution when updating an ECU that contains a full filesystem. However, this depends on if it is most valuable that the patch is as small as possible, or that the process of generating it is fast.
Detta examensarbete undersöker en metod för att effektivt uppdatera mjukvaran i en styrenhet i en bil. En patch som skickas till en bil ska vara så liten som möjligt och helst enbart innehålla de delar av mjukvaran som ändrats. En populär algorithm för att skapa en sådan patch är bsdiff. Den är dock inte gjord för filsystemsavbildningar, utan för binärer. Därför studeras här ett alternativ. Denna alternativa metod är baserad på Androids updateringsprocess. En fristående variant av Android A/B Update är implementerad och och jämförd med bsdiff, med avseende på tiden det tar att generera en patch och storleken av den. Resultatet visar att bsdiff genererar mindre patchar. Däremot är bsdiff också betydligt långsammare. Vidare ökar tiden linearitmisk då storleken på patchen ökar. Detta innebär att Android A/B Update kan vara en bättre lösning för att updatera en styrenhet som innehåller ett filsystem. Det beror dock på vad som värderas högst; en mindre patch eller att processen att skapa patchen ska vara snabbare.
APA, Harvard, Vancouver, ISO, and other styles
2

de, Mesa Krystle Elaine. "BSDF acquisition and analysis of paper." Diss., [La Jolla] : University of California, San Diego, 2010. http://wwwlib.umi.com/cr/ucsd/fullcit?p1477132.

Full text
Abstract:
Thesis (M.S.)--University of California, San Diego, 2010.
Title from first page of PDF file (viewed June 17, 2010). Available via ProQuest Digital Dissertations. Vita. Includes bibliographical references (leaves 40-43).
APA, Harvard, Vancouver, ISO, and other styles
3

Papas, Marios. "A physically-based BSDF for modeling the appearance of paper." Diss., [La Jolla] : University of California, San Diego, 2010. http://wwwlib.umi.com/cr/ucsd/fullcit?p1477133.

Full text
Abstract:
Thesis (M.S.)--University of California, San Diego, 2010.
Title from first page of PDF file (viewed June 23, 2010). Available via ProQuest Digital Dissertations. Includes bibliographical references (leaves 47-49).
APA, Harvard, Vancouver, ISO, and other styles
4

Andreani, Anna. "Conception d’un dispositif de mesure de BSDF pour l’éco-conception de bâtiments." Thesis, Lyon, 2020. http://www.theses.fr/2020LYSET003.

Full text
Abstract:
Dans un contexte de raréfaction des énergies primaires, il est nécessaire d’œuvrer pour la réduction des consommations énergétiques liées à l’éclairage dans les bâtiments tout en garantissant que les occupants bénéficient d'un bon confort visuel. La simulation physico-réaliste à l’aide de logiciels de simulation de la lumière constitue un outil d’évaluation de diverses variantes d’un bâtiment. Elle peut être mobilisée au sein d’approches d’optimisation multi-critères dans l’optique du déploiement de systèmes d’aide à la décision ayant vocation à identifier les meilleurs compromis possibles entre consommation énergétique et confort des usagers. Dans la mesure où les propriétés optiques des matériaux constitutifs des bâtiments (opaques, transparents, colorés, isotropes, anisotropes et présentant des textures ou des micro-reliefs) constituent une donnée d’entrée des logiciels de simulation de la lumière, leur caractérisation est un préalable essentiel à la mise en œuvre de cette démarche d'éco-conception des bâtiments. Les propriétés optiques des matériaux sont décrites par le formalisme mathématique de la BSDF (Bidirectional Scattering Distribution Function) et peuvent être intégrées dans la plupart des logiciels de simulation de la lumière sous la forme de modèles analytiques ou sous la forme de mesures tabulées. Les modèles analytiques largement utilisés permettent de caractériser des matériaux optiquement simples mais s’étendent difficilement aux matériaux plus complexes. De plus, aucun dispositif ne permet, à ce jour, de caractériser finement, via des mesures tabulées, toute la diversité des matériaux constitutifs du bâtiment en un temps opérationnel. Aussi, ce travail de thèse a pour objectif de concevoir un dispositif de mesure rapide et précis des caractéristiques optiques de matériaux pour la simulation physico-réaliste de bâtiments. Un premier dispositif de mesure a été conçu et a montré la faisabilité de l’exploitation d’un instrument muni de multicapteurs comme détecteur. Il a permis d’identifier les écueils à éviter ainsi que les obstacles à contourner pour la conception d'un second dispositif de mesure plus opérationnel, aux capacités accrues. S’appuyant sur un instrument muni de multicapteurs et sur un système de positionnement pilotable informatiquement, il permet la mesure des propriétés optiques des matériaux constitutifs du bâtiment dans un contexte opérationnel. Les phases d'acquisition et de traitement des données brutes sont supervisées informatiquement. La durée des mesures se situe entre 5 minutes 40 secondes et 3 heures 2 minutes et 30 secondes. Leur répétabilité moyenne est de 97.88%
In a context of increasing scarcity of primary energy, it is necessary to work to reduce energy consumption related to lighting in buildings while ensuring that occupants enjoy good visual comfort. Physical-realistic simulation using light simulation software is a tool for evaluating various variants of a building. It can be used in multi-criteria optimization approaches with a view to deploying decision-support systems designed to identify the best possible trade-offs between energy consumption and user comfort. Insofar as the optical properties of building materials (opaque, transparent, coloured, isotropic, anisotropic and with textures or micro-reliefs) are an input to light simulation software, their characterization is an essential prerequisite for the implementation of this eco-design approach for buildings. The optical properties of materials are described by the mathematical formalism of the BSDF (Bidirectional Scattering Distribution Function) and can be integrated into most light simulation software in the form of analytical models or tabulated measurements. Widely used analytical models can be used to characterize optically simple materials but are difficult to extend to more complex materials. Moreover, no device currently exists that can finely characterise the full range of materials in a building in an operational time frame using tabulated measurements. Therefore, the aim of this thesis work is to design a device for the fast and accurate measurement of the optical characteristics of materials for the physico-realistic simulation of buildings. A first measuring device has been designed and has shown the feasibility of operating an instrument equipped with multi-sensors as a detector. It identified the pitfalls to be avoided as well as the obstacles to be circumvented for the design of a second, more operational measuring device with increased capabilities. Based on an instrument equipped with multi-sensors and a computer-controlled positioning system, it allows the measurement of the optical properties of the building's constituent materials in an operational context. The raw data acquisition and processing phases are supervised by computer. The duration of the measurements ranges from 5 minutes 40 seconds to 3 hours 2 minutes and 30 seconds. Their average repeatability is 97.88%
APA, Harvard, Vancouver, ISO, and other styles
5

Granberg, Hjalmar. "Optical Response From Paper : Angle-dependent Light Scattering Measurements, Modelling, and Analysis." Doctoral thesis, KTH, Production Engineering, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3629.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jaworková, Magdalena. "Úprava konstrukce zařízení pro měření rozptylu laserového světla z drsných povrchů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417166.

Full text
Abstract:
This diploma thesis deals with a design modification of detection part of the laboratory instrument for measuring the topography of rough surfaces – laser goniometric scatterometer (SM II). Design modification is based on replacement of so far used detector instead for the detector of higher quality with better measurement parameters. The first part of the diploma thesis contains theoretical basics, which are necessary to understand the relationship between scalar diffraction theory and scattering measurements of monochromatic light. The emphasis is on the importance of choosing appropriate detection coordinates, which are affecting the aberrations of detected diffracted light. The practical part is dedicated to improving the sensitivity of the detection part of the scatterometer SM II that is used in The laboratory of coherence optics at IFE FME BUT. This part justifies the choice of the detector which predetermines both the use of optical elements and the overall design of the detection part as the goniometer.
APA, Harvard, Vancouver, ISO, and other styles
7

LIN, YUN-HSUAN, and 林芸萱. "Study of 2D Image Fusion for BSDF and Goniophotometry." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/2y66ke.

Full text
Abstract:
碩士
國立中央大學
光電科學與工程學系
104
Screen image synthetic whole-field optical distribution meter overcomes the shortcoming of time consuming of goniophotometer in the current market. It use camera to capture a wide range of light distribution with only one shot. By using rotator to change the picturing aspect, we can synthesize the whole images with aid of image fusion system to form the whole field optical distribution. Moreover, we add light source to illuminate the sample, and rotate the sample to change incident angle to obtain the BSDF measurement result. In this thesis, in order to measure the optical distribution and BSDF using one instrument. We increase the distance between the sample and the camera up to 50 cm. Besides, in order to reduce the volume of the instrument, the screen size is set as 601×496 (mm2), and the rotational part is the sample with light source instead of the imaging system. Since the screen size is limited, the total number of pictures is increased to cover the whole field. Here, we proposed an optimized solution to minimize the total number of pictures in semi-sphered field measurement. BSDF measurement and whole field optical distribution measurement distribution are accomplished with one instrument. The size of the light source in one dimension for the whole field optical distribution measurement achieve 5 cm.
APA, Harvard, Vancouver, ISO, and other styles
8

Huang, Chung-Teng, and 黃中騰. "The study of BSDF ABg model and measuring of optical diffusers." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/12545982251574046455.

Full text
Abstract:
碩士
國立高雄應用科技大學
光電與通訊研究所
96
Diffuser film plays an important role in the backlight module with benefits of optical efficiency and uniformity for different optical design purposes. The optical behaviors of diffuser are dominated by light scattering of the film. The BSDF (Bidirectional Scattering Distribution Function) is a mathematical description of the light-scattering properties of a surface. This study investigates the BSDF ABg parameters of diffusers. We also design an optical measuring system to gauge physical properties of BTDF. Using the BSDF Wizard software, we find the A, B and g values of diffusers. Then with the A, B, g values, we simulate the optical outcomes of the diffusers by building an optical system as experimental setup. Comparing the experimental outputs and the simulation outputs, we find the variation is about 5.9%-13%. Our investigation will help optical engineers to find the ABg parameters of diffuser and to design optical system for different applications.
APA, Harvard, Vancouver, ISO, and other styles
9

Gamboa, Guzman Luis Eduardo. "Accurate and efficient strategies for the appearance filtering of complex materials." Thèse, 2019. http://hdl.handle.net/1866/23436.

Full text
Abstract:
La synthèse d’images réalistes repose sur des modèles physiques décrivant les interactions entre la lumière et les matériaux attachés aux objets dans une scène tridimensionnelle. Ces modèles mathématiques sont complexes et, dans le cas général, n’admettent pas de solution analytique. Pour cette raison, l’utilisation de méthodes numériques robustes et efficaces est nécessaire. Les méthodes de Monte Carlo ou techniques alternatives comme l’utilisation de développement par fonction de base sont appropriées pour résoudre ce type de problème. Dans cette thèse par articles, nous présentons deux nouvelles techniques permettant l’in- tégration numérique efficace de matériaux complexes. En premier lieu, nous introduisons une nouvelle méthode permettant d’intégrer simultanément plusieurs dimensions définies dans le domaine angulaire et spatiale. Avoir une technique efficace est essentiel pour intégrer des matériaux avec des normales variant rapidement sous différentes conditions d’éclairage. Notre technique utilise une nouvelle formulation basée sur un histogramme sphérique définie de façon directionnelle et spatial. Ce dernier nous permet d’utiliser des harmoniques sphé- riques pour intégrer les différentes dimensions rapidement, réduisant le temps de calcul d’un facteur approximatif de 30× par rapport aux méthodes de l’état de l’art. Dans notre second travail, nous introduisons une nouvelle stratégie d’échantillonnage pour estimer le transport de lumière à l’intérieur de matériaux multicouches. En identifiant les meilleures stratégies d’échantillonnage, nous proposons une technique efficace et non biaisée pour construire des chemins de lumière à l’intérieur de ce type de matériau. Notre nouvelle approche permet d’obtenir un estimateur de Monte Carlo efficace et de faible variance dans des matériaux contenant un nombre arbitraire de couches.
Realistic computer generated images and simulations require physically-based models to properly capture and reproduce light-material interactions. The underlying mathematical formulations are complex and mandate the use of efficient numerical methods, since analytic solutions are not available. Monte Carlo integration is one such commonly used numerical method, although, alternative approaches leveraging, e.g., basis expansions, may be suitable to solve these challenging problems. In this thesis by articles, we present two works where we efficiently devise numerical integration strategies for the rendering of complex materials. First, we propose a method to compute a spatial-angular multi-dimensional integration problem present when rendering materials with high-frequency normal variation under large, angularly varying illumination. By computing and manipulating a novel spherical histogram data representation, we are able to use spherical harmonics to efficiently solve the integral, outperforming the state-of-the-art by a factor of roughly 30×. Our second work describes a high-performance Monte Carlo integration strategy for rendering layered materials. By identifying the best path sampling strategies in the micro-scale light transport context, we are able to tailor an unbiased and efficient path construction method to evaluate high throughput, low variance paths through an arbitrary number of layers.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Bsdiff"

1

A, Murshed Nabeel, Bortolozzi Flávio, and Brazilian Symposium on Document Image Analysis (1st : 1997 : Curitiba, Brazil), eds. Advances in document image analysis: First Brazilian symposium, BSDIA '97, Curitiba, Brazil, November 2-5, 1997 : proceedings. Berlin: Springer Verlag, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

(Editor), Nabeel A. Murshed, and Flavio Bortolozzi (Editor), eds. Advances in Document Image Analysis: First Brazilian Symposium, BSDIA'97, Curitiba, Brazil, November 2-5, 1997, Proceedings (Lecture Notes in Computer Science). Springer, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Bsdiff"

1

Klicker, Kyle A., David Fuhrman, and Donald R. Bjork. "BSDF database." In San Dieg - DL Tentative, edited by Robert P. Breault. SPIE, 1990. http://dx.doi.org/10.1117/12.22663.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Holzschuch, Nicolas, Anton Kaplanyan, Johannes Hanika, and Carsten Dachsbacher. "Estimating local Beckmann roughness for complex BSDFs." In SIGGRAPH '16: Special Interest Group on Computer Graphics and Interactive Techniques Conference. New York, NY, USA: ACM, 2016. http://dx.doi.org/10.1145/2897839.2927416.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cady, Fredrick M., Donald R. Bjork, Jeffrey Rifkin, and John C. Stover. "Linearity In BSDF Measurements." In 33rd Annual Techincal Symposium, edited by John C. Stover. SPIE, 1990. http://dx.doi.org/10.1117/12.962849.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Arts, Thijs, Dana Tomuta, and Volker Kirschner. "Black coatings BSDF database." In International Conference on Space Optics — ICSO 2021, edited by Zoran Sodnik, Bruno Cugny, and Nikos Karafolas. SPIE, 2021. http://dx.doi.org/10.1117/12.2600049.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kurt, Murat, Greg Ward, and Nicolas Bonneel. "A data-driven BSDF framework." In SIGGRAPH '16: Special Interest Group on Computer Graphics and Interactive Techniques Conference. New York, NY, USA: ACM, 2016. http://dx.doi.org/10.1145/2945078.2945109.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gür, Bilgehan, Hedser van Brug, Man Xu, and Elizabeth Vela. "Diffusers, properties, and performance in BSDF." In SPIE Optical Engineering + Applications, edited by Leonard M. Hanssen. SPIE, 2014. http://dx.doi.org/10.1117/12.2062174.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cassarly, William J. "Using the on-axis BSDF at a dielectric surface to model the BSDF at off-axis angles." In SPIE Optical Systems Design, edited by Tina E. Kidger and Stuart David. SPIE, 2011. http://dx.doi.org/10.1117/12.897290.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Hongsong, and Fengxia Li. "Image-based rendering of spatially-varying BSDF." In 2010 International Conference on Audio, Language and Image Processing (ICALIP). IEEE, 2010. http://dx.doi.org/10.1109/icalip.2010.5685197.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Brown, Andrea M., Daniel V. Hahn, Michael E. Thomas, David M. Brown, and Jessica Makowski. "Optical material characterization through BSDF measurement and analysis." In SPIE Optical Engineering + Applications, edited by Zu-Han Gu and Leonard M. Hanssen. SPIE, 2010. http://dx.doi.org/10.1117/12.861499.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Chunpo, Feng Xie, and Parashar Krishnamachari. "Importance sampling for a microcylinder based cloth bsdf." In ACM SIGGRAPH 2014 Talks. New York, New York, USA: ACM Press, 2014. http://dx.doi.org/10.1145/2614106.2614134.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Bsdiff"

1

Geisler-Moroder, David, Eleanor S. Lee, Gregory Ward, Bruno Bueno, Lars O. Grobe, Taoning Wang, Bertrand Deroisy, and Helen Rose Wilson. BSDF Generation Procedures for Daylighting Systems. IEA SHC Task 61, January 2021. http://dx.doi.org/10.18777/ieashc-task61-2021-0001.

Full text
Abstract:
This white paper summarizes the current state of the art in the field of measurement and simulation characterization of daylighting systems by bidirectional scattering distribution functions (BSDFs) and provides recommendations broken down by classes of systems and use cases.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Bsdiff' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography