Relevant bibliographies by topics / Buck converters

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Buck converters'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Buck converters.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Buck converters"

1

Zomorodi, Hossein, and Erfan Nazari. "Design and Simulation of Synchronous Buck Converter in Comparison with Regular Buck Converter." International Journal of Robotics and Control Systems 2, no. 1 (2022): 79–86. http://dx.doi.org/10.31763/ijrcs.v2i1.538.

Full text
Abstract:
In a variety of low-power applications, a step-down dc-dc converter is used to reduce the voltage from a higher level. The two types of dc-dc converters are a regular buck and synchronous buck. The synchronous buck utilizes two switches and one diode, whereas the regular buck uses one switch and one diode. Many converters rely on the power components' switching qualities to work. A second MOSFET is required due to the diode's higher conduction losses. Because of the diode's conduction losses, the converter's efficiency may be reduced. The use of a synchronous buck converter improves efficiency
APA, Harvard, Vancouver, ISO, and other styles
2

C K, Suman. "Design Optimization of Synchronous Buck Converter (SBC)." International Journal for Research in Applied Science and Engineering Technology 10, no. 9 (2022): 24–31. http://dx.doi.org/10.22214/ijraset.2022.46562.

Full text
Abstract:
Abstract: Nowadays Switched-mode power converters are playing a significant role in the industries by providing higher efficiency for various applications. There are various applications that implement power supply and battery charge circuits for devices like smartphones, TVs, and various electronic devices When it comes to DC-DC Converters the most popular among the industries are buck converters and the efficient version of the buck converter is the Synchronous buck converter. The SBC steps down the voltage from higher to lower levels. Efficiency is a crucial parameter as the industry’s focu
APA, Harvard, Vancouver, ISO, and other styles
3

Can, Erol. "A Common Capacitor Hybrid Buck-Boost Converter." Jordan Journal of Electrical Engineering 9, no. 1 (2023): 71. http://dx.doi.org/10.5455/jjee.204-1666615450.

Full text
Abstract:
DC-DC converters are electronic circuit elements that are frequently used to change the direct current (DC) level. This paper presents a hybrid buck-boost converter - with constant modulation index - that can change a DC voltage at two directions compared to the conventional buck-boost DC-DC converters. First, the circuit structure and operation are given. Then, the performance of the proposed converter is tested on resistive and inductive loads, and compared with that of conventional buck-boost converters. The obtained results demonstrate the effectiveness of the proposed converter. They unve
APA, Harvard, Vancouver, ISO, and other styles
4

Cheng, Hung-Liang, Lain-Chyr Hwang, Heidi H. Chang, Qi-You Wang, and Chun-An Cheng. "High-Efficiency Flicker-Free LED Driver with Soft-Switching Feature." Micromachines 13, no. 5 (2022): 797. http://dx.doi.org/10.3390/mi13050797.

Full text
Abstract:
A novel interleaved DC-DC buck converter is proposed to drive high-brightness light-emitting diodes (LEDs). The circuit configuration mainly consists of two buck converters, which are connected in parallel and use interleaved operation. Through interleaved operation, the power capability of the converter is doubled. Traditionally, two individual inductors are used in the two buck converters. The difference between conventional parallel-operated buck converters using two energy storage inductors and the proposed circuit is that the proposed circuit uses two small inductors and a coupled inducto
APA, Harvard, Vancouver, ISO, and other styles
5

Jayaswal, K., and D. K. Palwalia. "Performance Analysis of Non-Isolated DC-DC Buck Converter Using Resonant Approach." Engineering, Technology & Applied Science Research 8, no. 5 (2018): 3350–54. http://dx.doi.org/10.48084/etasr.2242.

Full text
Abstract:
DC-DC converters preserve or control the output DC voltage. Due to parasitic constituents such as leakage capacitance of both diode and inductor, and transformer leakage inductance, DC-DC converters mostly operate on rigid switching conditions which result in high switching losses. These parasitic constituents affect the dc-dc converter’s operational reliability, instigate electromagnetic interference issues and limit the converter’s operation at higher frequency operations. In this paper, resonant or soft-switch approach has been employed to improve the operating performance and design-orient
APA, Harvard, Vancouver, ISO, and other styles
6

Hwu, K. I., and T. J. Peng. "A Novel Buck–Boost Converter Combining KY and Buck Converters." IEEE Transactions on Power Electronics 27, no. 5 (2012): 2236–41. http://dx.doi.org/10.1109/tpel.2011.2182208.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kiran, Nagulapati. "Sliding Mode Control of Buck Converter." Bulletin of Electrical Engineering and Informatics 3, no. 1 (2014): 37–44. http://dx.doi.org/10.11591/eei.v3i1.183.

Full text
Abstract:
DC-DC converters are used to convert DC voltage from one level to other. These converters are drastically used in industry as well as in research. One of the main limitations of these converters is unregulated supply of voltage and current. To overcome these problems there are various control techniques. This paper presents two such methods. This paper compares dynamic performance of buck Converter using PID controller and Sliding mode controller. Simulation of PI and Sliding mode control of Buck Converter is carried out in MATLAB SIMULINK.
APA, Harvard, Vancouver, ISO, and other styles
8

Sreedhar, Jadapalli, and B. Basavaraja. "Plan and analysis of synchronous buck converter for UPS application." International Journal of Engineering & Technology 7, no. 1.1 (2017): 679. http://dx.doi.org/10.14419/ijet.v7i1.1.10827.

Full text
Abstract:
DC-DC converters occupies very significant role in the field of industries or daily life applications. To charge batteries of low voltage connected to uninterrupted power supply (UPS), DC-DC converters are needed. Batteries requires low voltage and the available voltage at the source is to be step-down to the required level of voltage at the point of utility (PoU). While designing DC-DC converters, efficiency and simplicity of the circuit is very much important. Simply for the UPS applications, Buck converter can deliver the voltage at required level which is very simple in operation but the i
APA, Harvard, Vancouver, ISO, and other styles
9

Surya, Sumukh, Mohan Krishna Srinivasan, and Sheldon Williamson. "Modeling of Average Current in Non-Ideal Buck and Synchronous Buck Converters for Low Power Application." Electronics 10, no. 21 (2021): 2672. http://dx.doi.org/10.3390/electronics10212672.

Full text
Abstract:
In this paper, a comparative analysis of the average switch/inductor current between ideal and non-ideal buck and synchronous buck converters is performed and verified against a standard LTspice model. The mathematical modeling of the converters was performed using volt-sec and amp-sec balance equations and analyzed using MATLAB/Simulink. The transients in the output voltage and the inductor current were observed. The transfer function of the switch current to the duty cycle (Gid) in open loop configuration for low-power converters operating in continuous conduction mode (CCM) was modeled usin
APA, Harvard, Vancouver, ISO, and other styles
10

Dwivedi, Dewang, Arun Kumar Maurya, Ayush Gangwar, Anas Ahmad, Ayush Pratap Maury, and Hemant Ahuja. "Performance analysis of solar PV system for different converter configurations." Journal of Physics: Conference Series 2570, no. 1 (2023): 012009. http://dx.doi.org/10.1088/1742-6596/2570/1/012009.

Full text
Abstract:
Abstract In present scenario power electronic converters are of great usage. Almost every electronic industry uses converters in one way or the other. If the converters are integrated with solar PV system, then their various parameters could be thoroughly studied and the most suitable converter could be chosen on the results obtained asper the performance parameters. This research work presents the thorough analysis of a PV system under different converter configurations. Mainly 6 converters are used in this entire research work Buck converter (Step down chopper), Boost converter (Step up chop
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Buck converters"

1

Qiu, Yang. "High-Frequency Modeling and Analyses for Buck and Multiphase Buck Converters." Diss., Virginia Tech, 2005. http://hdl.handle.net/10919/29804.

Full text
Abstract:
Future microprocessor poses many challenges to its dedicated power supplies, the voltage regulators (VRs), such as the low voltage, high current, fast load transient, etc. For the VR designs using multiphase buck converters, one of the results from these stringent challenges is a large amount of output capacitors, which is undesired from both a cost and a motherboard real estate perspective. In order to save the output capacitors, the control-loop bandwidth must be increased. However, the bandwidth is limited in the practical design. The influence from the switching frequency on the control-l
APA, Harvard, Vancouver, ISO, and other styles
2

Dey, Sourav. "Large-Signal Analysis of Buck and Interleaved Buck DC-AC Converters." Wright State University / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=wright1409578634.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Galigekere, Veda Prakash N. "SiC Schottky Diodes and Polyphase Buck Converters." Wright State University / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=wright1190064950.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

SEKHAR, MADHU KIRAN EDURU RAJA CHANDRA, and PARTHA SARADHI THOTA. "CONTROL OF BUCK CONVERTER BY POLYNOMIAL, PID AND PD CONTROLLERS." Thesis, Blekinge Tekniska Högskola, Sektionen för ingenjörsvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-2599.

Full text
Abstract:
This thesis is an ongoing project of Ericsson with collaboration of Blekinge Institute of Technology [BTH], and Linneaus University [LNU] to compare the functionality and performance of three controllers Polynomial Pole Placement, PID [Proportional Integral Derivative] and PD controller in third order. This paper presents the state space modeling approach of DC-DC Buck converter. The main aim of this thesis is, by considering the buck converter system of Ericsson BMR450 with the PID, POLYNOMIAL and PD controllers at feedback loop, thus running their Matlab file with their appropiate Simulink b
APA, Harvard, Vancouver, ISO, and other styles
5

Lau, Wai Keung. "Current-mode DC-DC buck converter with dynamic zero compensation /." View abstract or full-text, 2006. http://library.ust.hk/cgi/db/thesis.pl?ECED%202006%20LAU.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Siu, Man. "Design of voltage-mode buck converter with end-point prediction /." View abstract or full-text, 2004. http://library.ust.hk/cgi/db/thesis.pl?ELEC%202004%20SIU.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Moore, Jonathan E. "Frequency-based load sharing in current-mode-controlled buck converters." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1999. http://handle.dtic.mil/100.2/ADA362884.

Full text
Abstract:
Thesis (M.S. in Electrical Engineering) Naval Postgraduate School, March 1999.<br>"March 1999". Thesis advisor(s): John G. Ciezki, Robert W. Ashton. Includes bibliographical references (p. 103-105). Also available online.
APA, Harvard, Vancouver, ISO, and other styles
8

Ahmed, Muhammad Swilam Abdelhaleem. "Highly-efficient Low-Noise Buck Converters for Low-Power Microcontrollers." The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu1542277717997166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Salvo, Christopher. "Design and Implementation of a Multiphase Buck Converter for Front End 48V-12V Intermediate Bus Converters." Thesis, Virginia Tech, 2019. http://hdl.handle.net/10919/101938.

Full text
Abstract:
The trend in isolated DC/DC bus converters is to increase the output power in the same brick form factors that have been used in the past. Traditional intermediate bus converters (IBCs) use silicon power metal oxide semiconductor field effect transistors (MOSFETs), which recently have reached the limit in terms of turn on resistance (RDSON) and switching frequency. In order to make the IBCs smaller, the switching frequency needs to be pushed higher, which will in turn shrink the magnetics, lowering the converter size, but increase the switching related losses, lowering the overall efficiency
APA, Harvard, Vancouver, ISO, and other styles
10

Dong, Yan. "Investigation of Multiphase Coupled-Inductor Buck Converters in Point-of-Load Applications." Diss., Virginia Tech, 2009. http://hdl.handle.net/10919/28469.

Full text
Abstract:
Multiphase interleaving buck converters are widely used in todayâ s industrial point-of-load (POL) converters, especially the microprocessor voltage regulators (VRs). The issue of todayâ s multiphase interleaving buck converters is the conflict between the high efficiency and the fast transient in the phase inductor design. In 2000, P. Wong proposed the multiphase coupledinductor buck converter to solve this issue. With the phase inductors coupled together, the coupled-inductor worked as a nonlinear inductor due to the phase-shifted switching network, and the coupled-inductor has different e
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Buck converters"

1

Moore, Jonathan E. Frequency-based load sharing in current-mode-controlled buck converters. Naval Postgraduate School, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

K, Kokula Krishna Hari, ed. Variable Frequency Digital PWM Control for Low-Power Buck Converters. Association of Scientists, Developers and Faculties, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Biswajit, Ray, and United States. National Aeronautics and Space Administration., eds. Low-temperature operation of a Buck DC/DC converter. National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Biswajit, Ray, and United States. National Aeronautics and Space Administration., eds. Low-temperature operation of a Buck DC/DC converter. National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Biswajit, Ray, and United States. National Aeronautics and Space Administration., eds. Low-temperature operation of a Buck DC/DC converter. National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Frequency-Based Load Sharing in Current-Mode-Controlled Buck Converters. Storming Media, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Koubaâ, Karama. Analysis and Control of the Chaotic Behavior in a Multi-Cell DC/DC Buck Converter. Nova Science Publishers, Incorporated, 2018.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lee, Jade. Buck Converter Using the PIC16F753 Analog Features. Microchip Technology Incorporated, 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Huang, Apple. TB3103 - Buck Converter Using the PIC16F753 Analog Features. Microchip Technology Incorporated, 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Takenaka, Norio. TB3103 - Buck Converter Using the PIC16F753 Analog Features. Microchip Technology Incorporated, 2015.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Buck converters"

1

Neacșu, Dorin O. "Buck and Boost Converters." In Telecom Power Systems. CRC Press, 2017. http://dx.doi.org/10.4324/9781315104140-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Acary, Vincent, Olivier Bonnefon, and Bernard Brogliato. "Buck and Delta-Sigma Converters." In Lecture Notes in Electrical Engineering. Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-90-481-9681-4_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Luo, Wensheng, Yunfei Yin, Xiangyu Shao, Jianxing Liu, and Ligang Wu. "Adaptive Control of Buck Converters." In Studies in Systems, Decision and Control. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94289-2_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Villar Piqué, Gerard, and Eduard Alarcón. "3-Level Buck Converter Microelectronic Implementation." In CMOS Integrated Switching Power Converters. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-8843-0_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wittmann, Jürgen. "Fast-Switching High-Vin Buck Converters." In Integrated High-Vin Multi-MHz Converters. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-25257-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Luo, Wensheng, Yunfei Yin, Xiangyu Shao, Jianxing Liu, and Ligang Wu. "Sliding Mode Control of Buck Converters." In Studies in Systems, Decision and Control. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94289-2_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tang, Xudong, Yang Leng, Pude Yu, Rongwu Zhu, and Dongsheng Yu. "Bidirectional Communication Between Parallel Buck Converters." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-0553-9_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Asadi, Farzin, Sawai Pongswatd, Kei Eguchi, and Ngo Lam Trung. "Modeling Uncertainties for a Buck Converter." In Modeling Uncertainties in DC-DC Converters. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-031-02020-9_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Villar Piqué, Gerard, and Eduard Alarcón. "3-Level Buck Converter Design Space Exploration Results." In CMOS Integrated Switching Power Converters. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-8843-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Villar Piqué, Gerard, and Eduard Alarcón. "Buck Converter Design Space Exploration with Detailed Component Models." In CMOS Integrated Switching Power Converters. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-8843-0_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Buck converters"

1

Scheidl, Rudolf, Philipp Zagar, and Helmut Kogler. "A Hydraulically Controlled Multiple Buck Converter System." In BATH/ASME 2022 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/fpmc2022-88957.

Full text
Abstract:
Abstract The hydraulic buck converter with a pipe as inertance element is mostly considered with magnetically actuated fast switching valves. These valves are hardly available on the market and are costly. A further burden of most buck converters are the high hydraulic capacitances added on load side to flatten pulsation. They lead to a softness which requires sophisticated control. A previous study on a phase shifted operation of several buck converters showed a low pulsation which may make an extra pulsation attenuation device obsolete. Another study suggested a hydraulic actuation of the sw
APA, Harvard, Vancouver, ISO, and other styles
2

Ikriannikov, Alexandr, and Tobias Schmid. "Magnetically coupled buck converters." In 2013 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2013. http://dx.doi.org/10.1109/ecce.2013.6647368.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Jose, Jim Harley, and K. Pramelakumari. "A positive output buck boost converter combining KY and SR-buck converters." In 2015 International Conference on Power, Instrumentation, Control and Computing (PICC). IEEE, 2015. http://dx.doi.org/10.1109/picc.2015.7455775.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kiraly, Andrei-Alexandru, and Mirela Dobra. "Optimal Control for Buck Converters." In 2019 22nd International Conference on Control Systems and Computer Science (CSCS). IEEE, 2019. http://dx.doi.org/10.1109/cscs.2019.00019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jang, Yungtaek, and Milan M. Jovanovic. "Soft-switched bidirectional buck-boost converters." In 2017 IEEE Applied Power Electronics Conference and Exposition (APEC). IEEE, 2017. http://dx.doi.org/10.1109/apec.2017.7930707.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Nayak, Gayatri, and Shabari Nath. "Comparing Performances of SIDO Buck Converters." In 2018 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). IEEE, 2018. http://dx.doi.org/10.1109/pedes.2018.8707459.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

White, J. L., and W. J. Muldoon. "Two-inductor boost and buck converters." In 1987 IEEE Power Electronics Specialists Conference. IEEE, 1987. http://dx.doi.org/10.1109/pesc.1987.7077206.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ram, P. Vivek, K. Namitha Bhat, and R. C. Mala. "Multiple output push-pull converter with post regulated buck converters." In 2017 International Conference on Smart Grids, Power and Advanced Control Engineering (ICSPACE). IEEE, 2017. http://dx.doi.org/10.1109/icspace.2017.8343434.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kogler, Helmut, Rudolf Scheidl, and Michael Ehrentraut. "A Simulation Model of a Hydraulic Buck Converter Based on a Mixed Time Frequency Domain Iteration." In ASME/BATH 2013 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/fpmc2013-4409.

Full text
Abstract:
Digital hydraulics is an opportunity to realize simple, robust, cheap and energy efficient hydraulic drives. In such systems digital on/off valves are used instead of proportional valves. Moreover, in hydraulic switching converters the valves are actuated within a few milliseconds, which create sharp pressure changes and, in turn, significant wave propagation effects in the pipe system. For a proper design of digital hydraulic systems a sound understanding of these effects is required to achieve the desired behavior of the switching drive system. In such converters, like the buck-, boost or bo
APA, Harvard, Vancouver, ISO, and other styles
10

Trifa, V., Gh Brezeanu, and E. Ceuca. "Worst-Case Input Voltage in Buck, Boost and Buck-Boost converters." In 2019 International Semiconductor Conference (CAS). IEEE, 2019. http://dx.doi.org/10.1109/smicnd.2019.8923845.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Buck converters"

1

Ciezki, John G., and Robert W. Ashton. Analysis of a PWM Resonant Buck Chopper for Use as a Ship Service Converter Module. Defense Technical Information Center, 1999. http://dx.doi.org/10.21236/ada361136.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Watson, Mark, Martyn Wilmott, and Brian Erno. GRI-96-0452_2 Stress Corrosion Cracking Under Field Simulated Conditions II. Pipeline Research Council International, Inc. (PRCI), 1997. http://dx.doi.org/10.55274/r0011974.

Full text
Abstract:
The pH of solutions found under disbonded polyethylene tape coatings in the field is generally in the range of 6.5 to 7.5. Electrochemically determining corrosion rates for pipeline steels exposed to neutral pH solutions in this pH range indicate that corrosion rates are too low to account for the observed crack growth rates from field excavation programs. This suggests that for the SCC process to be based on a simple dissolution mechanism then the pH at the crack tip would have to be lower than the bulk solution pH. A computer model was developed to determine solution chemistry changes within
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography