Log in

Relevant bibliographies by topics / Butt

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Butt'

Author: Grafiati

Published: 26 July 2024

Last updated: 29 July 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Butt.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Butt"

1

Casals, Ferran, Josefa González, and Alfredo Ruiz. "Abundance and chromosomal distribution of six Drosophila buzzatii transposons: BuT1, BuT2, BuT3, BuT4, BuT5, and BuT6." Chromosoma 115, no. 5 (June 14, 2006): 403–12. http://dx.doi.org/10.1007/s00412-006-0071-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gaba, Dr Martin. "Butt out." Nursing Standard 10, no. 42 (July 10, 1996): 20. http://dx.doi.org/10.7748/ns.10.42.20.s33.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Eastridge, Brian J. "Butt Binder." Journal of Trauma: Injury, Infection, and Critical Care 62, Supplement (June 2007): S32. http://dx.doi.org/10.1097/ta.0b013e3180654095.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Negrón-Muntaner, Frances. "Jennifer’s Butt." Aztlán: A Journal of Chicano Studies 22, no. 2 (1997): 181–95. http://dx.doi.org/10.1525/azt.1997.22.2.181.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Hamzah, Siti Hawa, Chua Bon Yong, Nadiah Saari@Ash’ari, and Mat Som Marwi. "The Effect of Butt Joint on the Structural Behaviour of PSSDB Wall Panel." Scientific Research Journal 4, no. 1 (June 30, 2007): 27. http://dx.doi.org/10.24191/srj.v4i1.5663.

Full text

Abstract:

An experimental investigation was carried out to determine the effect of butt joint on the structural behaviour of profiled steel sheet dry board (PSSDB) load bearing wall with window opening. The samples tested were three (3) PSSDB walls with window opening and butt joint in the dry boards, and three (3) PSSDB walls with window opening but without butt joint in the dry boards. The samples were subjected to axial compressive load and comparisons were made between the two sets of samples. The average value of the ultimate load capacity for PSSDB load bearing wall with butt joint was found to be 286 kN, while that for the samples of PSSDB load bearing wall without butt joint was 260 kN. The average maximum lateral deflection values for both types of PSSDB walls were 8.9 mm and 13 mm respectively. Significant difference due to butt joint in dry board was seen in the reduced number of cracks by about 33 % in comparison to that without butt joint.

APA, Harvard, Vancouver, ISO, and other styles

6

Yogaswara, Deny, Muhammad Reza Cordova, and Ukis Shofarudin. "A preliminary investigation of associated chemicals in cigarette butt waste from the tourist beach area of North Jakarta, Indonesia." BIO Web of Conferences 106 (2024): 02001. http://dx.doi.org/10.1051/bioconf/202410602001.

Full text

Abstract:

Cigarette butts are among the most common and problematic forms of marine litter. However, there is limited research on the occurrence, abundance, and potential chemicals associated with cigarette butt waste in the environment. The study focused on investigating the occurrence, abundance, and chemical composition of cigarette butt waste on Ancol Beach, Jakarta, Indonesia, addressing a gap in knowledge regarding this prevalent and problematic form of marine litter. Despite Ancol Beach’s regular cleaning efforts, cigarette butt waste was still widespread with an abundance of 1.136 pcs/m2. However, this cigarette butt waste number is still less abundant compared to other regions. Chemical analysis of the cigarette butt waste revealed the presence of various chemical groups, notably aliphatic hydrocarbon compounds. The study emphasizes the importance of understanding and mitigating the environmental repercussions of the chemicals associated with cigarette butt waste and microplastic particles on the coastal ecosystem. Further research is urged to delve deeper into the emerging chemical pollutants present in cigarette butt waste spread in the coastal environments.

APA, Harvard, Vancouver, ISO, and other styles

7

Wang, Jia Jie, Zhi Bo Dong, Jing Qiang Zhang, Jian Guo Yang, Xue Song Liu, Hong Yuan Fang, and Tie Gang. "Cold Bending Properties of Under-Matched Butt Joints for High Strength Steel." Advanced Materials Research 557-559 (July 2012): 1308–12. http://dx.doi.org/10.4028/www.scientific.net/amr.557-559.1308.

Full text

Abstract:

In this paper, cold bending properties of Q620-CF steel butt joints were analyzed based on the finite element method. Finite element analysis (FEA) results indicate that the flush under-matched butt joints have lower bending properties than the flush equal-matched butt joints, but under-matched butt joints with definite reinforcement shape can get greater bending force and better cold bending angles than the flush equal-matched butt joints. It shows that shape design of the reinforcement can improve the bending load-carrying capacity of under-matched joints. The reliability of the FEA has been verified by the experiment.

APA, Harvard, Vancouver, ISO, and other styles

8

Harding, Anne. "Hugh R Butt." Lancet 372, no. 9644 (September 2008): 1144. http://dx.doi.org/10.1016/s0140-6736(08)61468-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Fox, R. T. V. "51. Butt rot." Mycologist 15, no. 4 (November 2001): 184–85. http://dx.doi.org/10.1016/s0269-915x(01)80019-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Stafford, N. "Hugh Roland Butt." BMJ 337, no. 03 4 (November 3, 2008): a2196. http://dx.doi.org/10.1136/bmj.a2196.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Butt"

1

Haunton, Jan. "Butt fusion welding of polyethylene." Thesis, Brunel University, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.332077.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Rashid, Haroon. "Butt fusion welding of polyethylene pipes." Thesis, Brunel University, 1997. http://bura.brunel.ac.uk/handle/2438/6623.

Full text

Abstract:

The butt fusion process is extensively used in the joining of polyethylene (PE) pipes by the water and gas industries. This welding process although deceptively simple, is rather poorly understood, with much of the initial developments being of a rather empirical nature. The Water Research centre (WRc) have funded the present research in an attempt to optimise the welding of high pressure pipeline (PE100) systems. The main aims of this research were to investigate the effect of different welding conditions on the physical and mechanical properties of the joints produced and to investigate these effects on the micro- and macro-structures of the joints produced. A series of welds were made using Eltex Tub 124 and Rigidex 002-50 pipes of 180mm diameter. The fusion pressure and heatsoak times were varied. A milling machine witha twin cutter arrangement was used to obtain the test specimens from around the circumference of the pipes. Differential scanning calorimetry was used to study the effect of sample preparation methodology on the thermo-oxidative stability. Polarised light microscopy and image analysis were used to study the macro- and micro-structural developments in the weld joint. Joint strength was evaluated via standard and non-standard tensile test methods. Milling the samples to produce the test specimens was found to decrease significantly the thermo-oxidative resistance of the polymer. Reasons for this behaviour have been proposed. In order to achieve high quality thin films from microtomy, custom-made blades were used. This programme also developed the optimum polishing method for the microtomed blades. The macro-structure of the bead: its shape and dimensions were found to be a function of temperature and pressure. Correlation was found between the bead geometry and the position around the circumference of the pipe. The macrostructures within the weld zone also showed this dependence on the position along the circumference of the pipe. An examination of the microstructures of each weld had shown the presence of five different zones. The feasibility of using microtomed thin sections in a tensile test was demonstrated. The test method provides a means to study failure initiation and propagation in the tensile test specimen. Initial deformation was found to occur in the centre of the melt-affected zone (MAZ) and the final failure occurs at the junction of the weld bead and the bulk polymer. Tests on films without the weld bead showed that maximum deformation occurred at the centre of the sample within the MAZ. The presence of the bead and the asymmetry in the test specimens caused by the welding process were found to have a significant influence on the failure mode and the failure strain. The strain rate was also found to play a significant role in both beaded and debeaded samples. The failure was initiated from the pseudo notches in the beaded samples. In the debeaded sample the failure was within the MAZ.

APA, Harvard, Vancouver, ISO, and other styles

3

Birrell, L. "Mathematical modelling of flash butt weld failure." Thesis, University of Cambridge, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.596660.

Full text

Abstract:

The work described in this thesis details the investigation into flash butt weld failure at Corus, Port Talbot, where the process is used to join coils of steel, permitting cold rolling without interruption. The aim of this work was to examine the factors which constitute weld failure and to determine whether failure could be eliminated. It was shown that weld failure cannot be predicted with appreciable levels of confidence with the use of neural networks based on inputs such as steel composition and the thickness and width of the coils to be joined. 817 weld breaks were recorded during 2006, of which all but two were observed during cold rolling. Analysis of the samples provided indicate that in some case the term weld break was incorrectly used to describe what was in fact failure in the base material, away from the joint. Prior to this work there were no reported data on the residual stress levels generated after flash butt welding of sheet steel with a thickness of 2.5 mm. It is now clear that in addition to the expected tensile stress in the weld, there is also a compressive stress of up to 200 MPa in the base material which extends far beyond the heat-affected zone. This result may go someway to explain why failure in the base material is observed outside the heat-affected zone during cold rolling. Finally, a post-weld heat treatment for a high hardening boron-steel was examined. The heat treatment was intended to supersede previous attempts to reduce the post-weld cooling rate by applying a voltage across the weld to locally heat the region to a desired temperature.

APA, Harvard, Vancouver, ISO, and other styles

4

Miller, Jeremy J. "You My Honeybee, I'm Your Funky Butt." Miami University / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=miami1154716100.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Butt, Uzma [Verfasser]. "Rezidivquote und Risikoprofil bei Makulachirurgie / Uzma Butt." Köln : Deutsche Zentralbibliothek für Medizin, 2011. http://d-nb.info/1010030256/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Zhang, Cheng. "Robotic 3D friction stir welding : T-butt joint." Thesis, Högskolan Väst, Avd för automationssystem, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-8250.

Full text

Abstract:

This Master Thesis was performed in terms of robotic three dimensional friction stir welding with T-butt joint. Friction stir welding (FSW) is a solid state welding method that achieves the weld temperature by friction of a rotating non-consumable tool with the workpiece. Science and technology fast developing requires for higher seam quality and more complex welding joint geometry like 3D welds. In order to acquire high productivity, capacity and flexibility with acceptable cost, robotic FSW solution have been proposed. Instead of the standard FSW machine, using a robot to perform complicated welds such as, three-dimensional. In this report, a solution for weld a 3D T-butt joint, which located in an aluminium cylinder with 1.5 mm thickness using a robot, was developed. Moreover, two new paths were investigated in order to avoid the use of two welds to perform this type of joint. The paths were tested on 2D and on 3D (with a 5050 curvature radius) geometries. Both paths had good results. What is more, the parameter developing methods of FSW process, which is composed of necessary parameter setting, positional compensation was introduced. Specially,the study demonstrates how complicate geometry can be welded using a robot. Also,it shows that TWT temperature control is able to acquire high quality 3D welds. In addition, an analysis of the 2D welding and 3D welding was performed, which exposed that, keeping exactly the same welding conditions, higher lateral forces on the tool were found during 3D welding. Basis on the special case in this paper, when the tool goes like "climbing" the sample, the suffering force of tool decreasing with increasing the height(Z position); nevertheless, when the tool goes like "downhill", the suffering force of tool decreasing with decreasing the height (Z position). What is more, in 2D weld, increasing the downforce (Fz) results increasing the lateral forces which can be Fx and/or Fy. Finally, the future works suggestions were presented in terms of (1) performing the new paths into a real cylinder, (2) performing tensile test on the paths and comparing it with conventional path which weld twice, (3) researching how the downforce (Fz) influence the Fx and Fy during welding of different 3D geometries, (4) how the cooling rate of backing bar influence the seam quality when it is use the same welding parameters and (5) the effect of performing welds in the same welding temperature achieved with different combination of the tool rotational speed and downforce on the material properties

APA, Harvard, Vancouver, ISO, and other styles

7

Naples, Jessica R. "Goose Butt, Grandma Glasses, And Other Ordinary Things." The Ohio State University, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=osu1405594537.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ovington, Stephen. "Fusion welding of crosslinked polyethylene." Thesis, University of Sunderland, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.297127.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Lawson, Shaun W. "Automatic defect detection in industrial radioscopic and ultrasonic images." Thesis, University of Surrey, 1996. http://epubs.surrey.ac.uk/843944/.

Full text

Abstract:

This thesis describes a number of approaches to the problems of automatic defect detection in ultrasonic Time of Flight Diffraction (TOFD) and X-ray radioscopic images of butt welds in steel plate. A number of novel image segmentation techniques are developed, two of which feature the use of backpropagation artificial neural networks. Two new methods for defect detection in ultrasonic TOFD images are described - the first uses thresholding of individual one-dimensional A-scans, and the second uses a neural network to classify pixels using two dimensional local area statistics. In addition, three new methods for defect detection in radioscopic images are described - the first is based on the use of two conventional spatial filters, the second uses grey level morphology to replace the 'blurring' stage of conventional "blur and subtract' procedures, and the third uses a neural network to classify pixels using raw grey level data at the input layer. It is considered that all five methods which have been developed show novelty in their methodology, design and implementation, most specifically in that (1) no previous methods for automatic defect detection in TOFD images, (2) very few successful implementations of grey level data processing by neural networks, and (3) few examples of local area segmentation of 'real' textured images for automatic inspection have been reported in the literature. The methods developed were tested against data interpreted by skilled NDT inspectors. In the case of the ultrasonic TOFD image processing, both automatic methods performed exceptionally well, producing results comparable to that of a human inspector. In the case of the radioscopic image processing, the ANN method also produced results comparable to that achieved by a human inspector and also gave comparable or consistently better results than those obtained using a number of existing techniques.

APA, Harvard, Vancouver, ISO, and other styles

10

Shillitoe, Stephen. "A study of the butt fusion welding of thermoplastic pipes." Thesis, University of Bradford, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.235570.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Butt"

1

Singh, Surinder. Bolda Butt. Amritsar: Navin, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Perl, Erica S. Chicken butt. New York: Abrams Books for Young Readers, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Butt, Muhammad Younas. Butt tameezian. Lahore: Sang-e-Meel, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Grass, Günter. Der Butt. Frankfurt am Main: Luchterhand Literaturverlag, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Butt, Mohammad Younus. Butt soortian. Lahore: Sang-e-Meel, 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Grass, Günter. Der Butt. Göttingen: Steidl, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bennett, Artie. The butt book. New York: Bloomsbury Children's Books, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Daly, Niki. Operation kick butt. London: Hodder Children's, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Grass, Günter. Der Butt: Roman. Darmstadt: Luchterhand, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

SIMMONS-CRIPPS, VIVIAN. ONE BUTT CANOE. [Place of publication not identified]: XULON Press, 2015.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Butt"

1

Gottschild, Brenda Dixon. "Butt." In The Black Dancing Body, 144–87. New York: Palgrave Macmillan US, 2003. http://dx.doi.org/10.1007/978-1-137-03900-2_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gooch, Jan W. "Butt." In Encyclopedic Dictionary of Polymers, 101. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_1720.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Gooch, Jan W. "Butt Fusion." In Encyclopedic Dictionary of Polymers, 101. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_1721.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Gooch, Jan W. "Butt Joint." In Encyclopedic Dictionary of Polymers, 101. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_1722.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Gooch, Jan W. "Butt Veneer." In Encyclopedic Dictionary of Polymers, 101. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_1724.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Neuhaus, Volker. "Der Butt." In Günter Grass, 155–68. Stuttgart: J.B. Metzler, 2010. http://dx.doi.org/10.1007/978-3-476-05086-1_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Weik, Martin H. "butt coupling." In Computer Science and Communications Dictionary, 155. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_1988.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Neuhaus, Volker. "»Der Butt«." In Günter Grass, 133–46. Stuttgart: J.B. Metzler, 1993. http://dx.doi.org/10.1007/978-3-476-04093-0_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Rehberg, Peter. "Reading Butt." In Hipster Porn, 19–39. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003193296-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Gooch, Jan W. "Bead and Butt." In Encyclopedic Dictionary of Polymers, 70. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_1147.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Butt"

1

Zinoviev, Kirill, Jose Antonio Plaza, Víctor Cadarso, Laura M. Lechuga, and Carlos Dominguez. "Butt coupled microcantilever in sensing applications." In Photonics Europe, edited by Hakan Ürey and Ayman El-Fatatry. SPIE, 2006. http://dx.doi.org/10.1117/12.662393.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Andya, Heny, Yuan-Zhang Luo, Chih-Han Wu, Yi-Mei Huang, Ling-Chieh Shen, and Chih-Kuang Lin. "Thermal and Mechanical Analysis of Butt Welding." In The 5th World Congress on Mechanical, Chemical, and Material Engineering. Avestia Publishing, 2019. http://dx.doi.org/10.11159/icmie19.105.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Taka, Takao, Mutsuo Nakanishi, and Nobuyuki Yamauchi. "DC Butt Welding Process for Wheel-Rim." In SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1988. http://dx.doi.org/10.4271/880693.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Andersson, G. O., and M. Weidemann. "Flash Butt Welding for S-Lay Barges." In Offshore Technology Conference. Offshore Technology Conference, 1985. http://dx.doi.org/10.4043/4869-ms.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Scaramangas, A., and R. F. D. Porter Goff. "Residual Stresses in Cylinder Girth Butt Welds." In Offshore Technology Conference. Offshore Technology Conference, 1985. http://dx.doi.org/10.4043/5024-ms.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

von Arnim, Mareike, Jennifer Spiegler, and Ulrike Kuhlmann. "Butt welded connections of high strength steel." In IABSE Congress, Ghent 2021: Structural Engineering for Future Societal Needs. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/ghent.2021.1118.

Full text

Abstract:

<p>High-performance materials such as high strength steels allow for resource-efficient innovative structures. Therefore, economical and user-friendly design concepts for welded connections of high strength steels are required. Current design rules had been developed mainly for mild steels, e.g. requiring an overmatching of the filler metal. It is not considered, that a soft area which may form in the heat-affected zone of welded high strength steel connections may lead to an overestimation of the load-carrying capacity. Besides, mixed connections as well as under- and overmatching filler metals are not included in the current design codes. Based on a large number of experimental and numerical investigations, a design concept has been developed which takes the characteristics of butt welded high strength steel connections into account. Additionally, experimental and numerical investigations are planned to transfer the new concept of design also to mixed connections.</p>

APA, Harvard, Vancouver, ISO, and other styles

7

von Arnim, Mareike, Jennifer Spiegler, and Ulrike Kuhlmann. "Butt welded connections of high strength steel." In IABSE Congress, Ghent 2021: Structural Engineering for Future Societal Needs. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/ghent.2021.1118.

Full text

Abstract:

<p>High-performance materials such as high strength steels allow for resource-efficient innovative structures. Therefore, economical and user-friendly design concepts for welded connections of high strength steels are required. Current design rules had been developed mainly for mild steels, e.g. requiring an overmatching of the filler metal. It is not considered, that a soft area which may form in the heat-affected zone of welded high strength steel connections may lead to an overestimation of the load-carrying capacity. Besides, mixed connections as well as under- and overmatching filler metals are not included in the current design codes. Based on a large number of experimental and numerical investigations, a design concept has been developed which takes the characteristics of butt welded high strength steel connections into account. Additionally, experimental and numerical investigations are planned to transfer the new concept of design also to mixed connections.</p>

APA, Harvard, Vancouver, ISO, and other styles

8

MIKŁASZEWICZ, I. "Testing of Flash Butt Welded Rail Joints." In Terotechnology XII. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644902059-36.

Full text

Abstract:

Abstract. This article presents selected aspects of testing flash butt welded rail joints that have a decisive impact on the rails’ operational strength, including cracking in the track. Bending tests of rail joints, fatigue tests, hardness HV30, residual stress results, and microstructure of welded joints are presented. The introduction shows sporadically occurring joint defects revealed on broken fractures related to the technological process of flash butt welding. The above tests were based on the requirements of PN-EN 14587-1:2019-03 [1] and PN-EN 13674-1+A1:2017-07 [2].

APA, Harvard, Vancouver, ISO, and other styles

9

Bautista, Mac T. "Seismic Modification to the Butt Valley Dam." In Waterpower Conference 1999. Reston, VA: American Society of Civil Engineers, 1999. http://dx.doi.org/10.1061/40440(1999)2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Nita, Valentin A., Amelia Ciobanu, Cristian Negrescu, and Dumitru Stanomir. "Fast algorithm for detecting butt-spliced edits." In 2016 12th IEEE International Symposium on Electronics and Telecommunications (ISETC). IEEE, 2016. http://dx.doi.org/10.1109/isetc.2016.7781109.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Butt"

1

Gong, Mengyan, Shahana S. Khurshid, and Dustin G. Poppendieck. What's in a butt? environmental contamination from airborne cigarette butt emissions. Gaithersburg, MD: National Institute of Standards and Technology, January 2017. http://dx.doi.org/10.6028/nist.tn.1948.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Martovetsky, N. Butt Joint Tool Commissioning. Office of Scientific and Technical Information (OSTI), December 2007. http://dx.doi.org/10.2172/923995.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Martovetsky, N. Butt Joint Tool Status: ITER-US-LLNL-NMARTOVETSKY-01312007. Office of Scientific and Technical Information (OSTI), February 2007. http://dx.doi.org/10.2172/900872.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Langhelm, J., and James Scheltens. The National Shipbuilding Research Program. Square Butt Pipe Welding. Fort Belvoir, VA: Defense Technical Information Center, April 1996. http://dx.doi.org/10.21236/ada453318.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Dale, Martin E., Robert L. Brisbin, and Robert L. Brisbin. Butt log quality of trees in Pennsylvania oak stands. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experimental Station, 1985. http://dx.doi.org/10.2737/ne-rp-568.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Myers, John R., Gary W. Miller, Harry V. ,. Jr Wiant, Joseph E. Barnard, and Joseph E. Barnard. Butt-log grade distributions for five Appalachian hardwood species. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experimental Station, 1986. http://dx.doi.org/10.2737/ne-rp-590.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Dale, Martin E., Robert L. Brisbin, and Robert L. Brisbin. Butt log quality of trees in Pennsylvania oak stands. Broomall, PA: U.S. Department of Agriculture, Forest Service, Northeastern Forest Experimental Station, 1985. http://dx.doi.org/10.2737/ne-rp-568.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Crawford, Susan L., Stephen E. Cumblidge, Steven R. Doctor, Thomas E. Hall, and Michael T. Anderson. Technical Letter Report - Preliminary Assessment of NDE Methods on Inspection of HDPE Butt Fusion Piping Joints for Lack of Fusion. Office of Scientific and Technical Information (OSTI), May 2008. http://dx.doi.org/10.2172/934406.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Hoelzer, David T., Caleb P. Massey, Christopher M. Fancher, and Wei Tang. Complete Status Report Documenting the Development of Friction Stir Welding for Producing a Butt Joint in Thin Wall Tubing of ODS Alloys. Office of Scientific and Technical Information (OSTI), September 2018. http://dx.doi.org/10.2172/1492167.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Rice, Veronika J. Initial Testing for the Recommendation of Improved Gas Metal Arc Welding Procedures for HY-80 Steel Plate Butt Joints at Norfolk Naval Shipyard. Fort Belvoir, VA: Defense Technical Information Center, December 2015. http://dx.doi.org/10.21236/ad1009205.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!