Relevant bibliographies by topics / BWM

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'BWM'

Author: Grafiati

Published: 10 June 2021

Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'BWM.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "BWM"

Vijayaraghavan, Thiruvengadam, Amit Rajesh, and Karthikeyan Sankaralingam. "MPU-BWM: Accelerating Sequence Alignment." IEEE Computer Architecture Letters 17, no. 2 (July 1, 2018): 179–82. http://dx.doi.org/10.1109/lca.2018.2849064.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Bailey, Stewart I., Pietro Bartolozzi, Rudolf Bertagnoli, Stefano Boriani, Ad F. A. van Beurden, Anthony T. Cross, Hans P. Friedl, et al. "The BWM Spinal Fixator System." Spine 21, no. 17 (September 1996): 2006–15. http://dx.doi.org/10.1097/00007632-199609010-00016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Pamučar, Dragan, Fatih Ecer, Goran Cirovic, and Melfi A. Arlasheedi. "Application of Improved Best Worst Method (BWM) in Real-World Problems." Mathematics 8, no. 8 (August 11, 2020): 1342. http://dx.doi.org/10.3390/math8081342.

Full text

Abstract:

The Best Worst Method (BWM) represents a powerful tool for multi-criteria decision-making and defining criteria weight coefficients. However, while solving real-world problems, there are specific multi-criteria problems where several criteria exert the same influence on decision-making. In such situations, the traditional postulates of the BWM imply the defining of one best criterion and one worst criterion from within a set of observed criteria. In this paper, an improvement of the traditional BWM that eliminates this problem is presented. The improved BWM (BWM-I) offers the possibility for decision-makers to express their preferences even in cases where there is more than one best and worst criterion. The development enables the following: (1) the BWM-I enables us to express experts’ preferences irrespective of the number of the best/worst criteria in a set of evaluation criteria; (2) the application of the BWM-I reduces the possibility of making a mistake while comparing pairs of criteria, which increases the reliability of the results; and (3) the BWM-I is characterized by its flexibility, which is expressed through the possibility of the realistic processing of experts’ preferences irrespective of the number of the criteria that have the same significance and the possibility of the transformation of the BWM-I into the traditional BWM (should there be a unique best/worst criterion). To present the applicability of the BWM-I, it was applied to defining the weight coefficients of the criteria in the field of renewable energy and their ranking.

APA, Harvard, Vancouver, ISO, and other styles

Kocak, Huseyin, Atalay Caglar, and Gulin Zeynep Oztas. "Euclidean Best–Worst Method and Its Application." International Journal of Information Technology & Decision Making 17, no. 05 (September 2018): 1587–605. http://dx.doi.org/10.1142/s0219622018500323.

Full text

Abstract:

In this study, we propose Euclidean best–worst method (Euclidean BWM), which does not require any other extra calculations and analysis compared to nonlinear Chebyshev BWM. Using numerical examples, we illustrate and discuss the efficiency of the Euclidean BWM based on minimizing Euclidean norm instead of Chebyshev norm and using the consistency index matrix. Obtained results show that Euclidean BWM is an efficient tool resulting in reliable unique solutions, regardless of the number of the criteria, comparing with the linear and nonlinear model of the Chebyshev BWM. Moreover, we develop a MAPLE package “BWM” using only pairwise comparison vectors as the arguments to obtain the unique solution of a given problem by both the Euclidean BWM and linear model of Chebyshev BWM.

APA, Harvard, Vancouver, ISO, and other styles

Majumder, Priyanka, Valentina Emilia Balas, Arnab Paul, and Dayarnab Baidya. "Application of improved fuzzy best worst analytic hierarchy process on renewable energy." PeerJ Computer Science 7 (April 13, 2021): e453. http://dx.doi.org/10.7717/peerj-cs.453.

Full text

Abstract:

In this work, a novel fuzzy decision making technique namely trapezoidal fuzzy Best-Worst method (fuzzy BWM) is developed which is based on Best-Worst method (BWM) and Trapezoidal fuzzy number. The real motive behind our work is to take a broad view of the existing fuzzy BWM based on triangular fuzzy number by trapezoidal fuzzy number. Also, we have presented a new hybrid MCDM technique called as Trapezoidal fuzzy Best Worst Analytic Hierarchy based on proposed trapezoidal fuzzy BWM and existing trapezoidal fuzzy Analytic Hierarchy Process (AHP). BWM approach is employed in evaluating the PV of considering criteria and trapezoidal fuzzy AHP is used to assess the local priority vale (PV) of considering alternatives (or indicators) of a decision problem. Moreover it used to identify the most significant alternative which is responsible for performance efficiency of a hydro power plant under climatic scenario. From the result, it is undoubtedly found that hydraulic had is most responsible indicator. Further, the CR (consistency ratio) value which is determined by our proposed trapezoidal fuzzy BWM is less than that of existing BWM and fuzzy BWM techniques. Finally, we have validated our result by comparative study, scenario analysis and sensitivity analysis.

APA, Harvard, Vancouver, ISO, and other styles

Zulfiandri, Mochammad Iffan, Hasbi Yasin, and Sudarno Sudarno. "PEMILIHAN SMARTPHONE TERBAIK PENUNJANG KEGIATAN AKADEMIS MENGGUNAKAN METODE BWM DAN PENGEMBANGAN AHP." Jurnal Gaussian 10, no. 1 (February 28, 2021): 55–65. http://dx.doi.org/10.14710/j.gauss.v10i1.30542.

Full text

Abstract:

Multi-Criteria Decision Making (MCDM) is a decision-making method to determine the best alternative from several alternatives based on several certain criteria. One of the alternative decision-making methods that can be used is the Best Worst Method (BWM) and the Analytical Hierarchy Process (AHP). BWM makes structured pairwise comparisons and AHP breaks down complex problems into hierarchical structures. One of the decision-making problems that can be solved by the BWM and AHP methods is the problem of choosing a smartphone. Smartphones are one of the most widely used Information and Communication Technology (ICT) devices by Indonesians. The use of smartphones as ICT devices has benefits for the academic community, especially as a means of supporting academic activities. However, various types and mereks of smartphones are circulating, making users confused about choosing the best smartphone according to their needs. Therefore, a reliable method is needed to make it easier for users to choose the best smartphone, especially in supporting academic activities, namely by using a combination of the BWM method and AHP development. The BWM method is used to calculate the optimal weight of the criteria and the AHP method that has been developed is used to calculate the alternative optimal weight based on the criteria. The combination of the two is used to calculate the final optimal weight for each alternative. The results of the calculation of the optimal weight of the criteria show that the RAM criterion has the highest weight, which is 0.290 and the Screen Size criterion has the lowest weight, which is 0.047. The final result obtained is a smartphone type OPPO Find X2 with a final optimal weight of 0.153 to be the best alternative among other alternatives. Keywords: Multi-Criteria Decision Making (MCDM), Best Worst Method (BWM), Analytical Hierarchy Process (AHP), Information and Communication Technology (ICT), Smartphones, Academic Activities

APA, Harvard, Vancouver, ISO, and other styles

Zhu, Guocheng, Shanshan Zhang, Yongning Bian, and Andrew S. Hursthouse. "Multi-linear regression model for chlorine consumption by waters." Environmental Engineering Research 26, no. 4 (September 2, 2020): 200402–0. http://dx.doi.org/10.4491/eer.2020.402.

Full text

Abstract:

In drinking water treatment, disinfection is a key step to ensure the safety of water quality and people's health but little is known of the relationship between chlorine consumption and water matrix properties from varied sources (BWM). In this study, we measured the fluorescence from fractions of NOM (FFN) for the relevant BWM. This included the evaluation of three components: the chlorine-dependence factor (CDF) (DOC and NH3-N), the BWM (such as NO3-, NO2- and turbidity), and FFN (I-V fluorescence fractions). Multi-linear regression model was used to fit the data. Results showed that when using the CDF, BWM and FNN, in the prediction of chlorine consumption showed the (R2) values were 0.72, 0.71 and 0.41, respectively. While the FNN did not fit the model well it did enhance the model using CDF by 11.26%. The FNN is not effective in enhancement of the BWM response to the model. Combination of the CDF, BWM and FNN or that of the CDF and BWM were both effective in prediction of chlorine consumption.

APA, Harvard, Vancouver, ISO, and other styles

Safitri, Revita Adelia, and Raditya Sukmana. "EFEKTIVITAS BANK WAKAF MIKRO DALAM MENGURANGI KEMISKINAN (Studi Kasus LKMS Denanyar Sumber Barokah)." Jurnal Ekonomi Syariah Teori dan Terapan 6, no. 10 (January 18, 2020): 1936. http://dx.doi.org/10.20473/vol6iss201910pp1936-1952.

Full text

Abstract:

This study aims to investigate the effectiveness of Bank Wakaf Mikro (BWM) in reducing poverty. The case study approach on LKMS Denanyar Sumber Barokah. This study uses quantitative methods conducted by questionnaire tools to collect the data. The sampling method used was purposive sampling method and obtained 84 people. This study goes beyond data measurement using paired sample t-test. The findings of this study is BWM financing is effective in reducing poverty. Most of respondents can increase their income after receiving BWM financing. The results of this study indicate that products of BWM have helped the customers in reducing their poverty.Keywords: Sharia Microfinance, Micro Waqf Bank, Poverty

APA, Harvard, Vancouver, ISO, and other styles

Salimi, Negin. "Quality assessment of scientific outputs using the BWM." Scientometrics 112, no. 1 (February 16, 2017): 195–213. http://dx.doi.org/10.1007/s11192-017-2284-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Rozalinda, Rozalinda, and Nurhasnah Nurhasnah. "Bank Wakaf Mikro: The Operations and Its Role Towards Muslim Community Economic Empowerment in Islamic Boarding School." Islam Realitas: Journal of Islamic & Social Studies 6, no. 1 (June 30, 2020): 42. http://dx.doi.org/10.30983/islam_realitas.v6i1.3119.

Full text

Abstract:

Many poor people cannot access financial services because they are seen as unbankable. Bank Wakaf Mikro (BWM) is established to address this issue. This study aims to dissect the operation of BWM and its role on community economic empowerment. This research is a type of qualitative descriptive study, conducted at BWM in West Sumatra, Yogyakarta, Central Java and East Java. Data collection techniques are done by interview, observations and documentation data. All data are analyzed qualitatively. The results showed that BWM is a Sharia Microfinance Institution (LKMS) incorporated as a cooperative. The empowerment model carried out by BWM is to provide financing and assistance with the potential productive poor market segments around the Islamic boarding school. Distribution of funding and assistance uses a group approach to the joint responsibility system. In its journey, BWM has shown its role in community economic empowerment through providing training to prospective customers, then channeling financing to customers who pass the group feasibility test and provide assistance to customers who receive financing through weekly halaqah activities.Banyak masyarakat miskin tidak dapat mengakses jasa keuangan karena mereka dipandang unbankable. Bank Wakaf Mikro (BWM) didirikan untuk menjawab persoalan tersebut. Penelitian ini bertujuan membedah operasional BWM dan peranya terhadap pemberdayaan ekonomi masyarakat. Penelitian ini merupakan jenis penelitian deskriptif kualitatif, dilakukan pada BWM yang ada di Sumatera Barat, Yogyakarta, Jawa Tengah, dan Jawa Timur. Teknik pengumpulan data dilakukan dengan wawancara, observasi dan data dokumentasi. Seluruh data ditela’ah dan dianalisis secara kualitatif. Hasil penelitian menunjukkan BWM merupakan Lembaga Keuangan Mikro Syariah (LKMS) berbadan hukum koperasi. Model pemberdayaan yang dilakukan oleh BWM adalah menyediakan pembiayaan dan pendampingan dengan segmen pasar masyarakat miskin potensial produktif yang berada di sekitar pondok pesantren. Penyaluran pembiayaan dan pendampingan menggunakan pendekatan kelompok dengan sistem tanggung renteng. Dalam perjalannya BWM sudah menunjukkan perannya dalam pemberdayaan ekonomi masyarakat melalui pemberian pelatihan kepada calon nasabah, kemudian menyalurkan pembiayaan kepada nasabah yang lulus uji kelayakan kelompok dan memberikan pendampingan kepada nasabah yang menerima pembiayaan melalui kegiatan halaqah mingguan.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "BWM"

Clark, Eric, and David Olsson. "Utveckling av arbetsprocess för effektivare produktutveckling : Tillämpad på standardisering av helautomatiskt snabbfäste till hjullastare." Thesis, Högskolan i Gävle, Avdelningen för industriell ekonomi, industridesign och maskinteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-36054.

Full text

Abstract:

För att vara konkurrenskraftiga på marknaden tvingas företag utveckla nya strategier för produktutveckling, som kan anpassas till allt högre kundbehov. Syftet med detta arbete var att effektivisera produktutvecklingen för företag inom tillverkningsindustrin. Målet var att utveckla en effektiv arbetsprocess för produktutveckling samt att tillämpa processen på ett projekt, där ett helautomatiskt snabbfäste till mindre hjullastare skulle standardiseras till företaget OilQuick.Examensarbetet delades in i två delar. Den första delen behandlar skapandet av arbetsprocessen. Denna grundas i befintlig forskning och identifierades genom en litteraturstudie. Den andra delen behandlar tillämpning av arbetsprocessen på standardiseringen av snabbfästet till hjullastare. Data och kunskap till arbetet samlades in genom marknadsundersökningar, studiebesök, möten med kunder och Reverse Engineering. Kundkraven rangordnades med Best-worst metoden och översattes till tekniska produktegenskaper med Kvalitetshuset.Tre koncept genererades i Autodesk Inventor utifrån kraven och produktegenskaperna, samt datan som framkom av Reverse Engineering och marknadsundersökningen. Enligt kundkravet behövde det färdiga snabbfästet passa minst fyra olika hjullastarmodeller i viktklassen fem till åtta ton. Detta medförde att alla tre koncepten modulbaserades, både för att underlätta eventuella modifikationer mellan hjullastarmodellerna och för att minimera antalet detaljer som behövde modifieras. Alla tre konceptens redskapsgrindar hade standardiserade mått som passade de undersökta hjullastarmodeller. Det koncept som bäst uppfyllde kundkraven utvärderades med Fuzzy TOPSIS metoden. Det slutgiltiga konceptet justerades utifrån kundens önskemål innan det färdiga resultatet presenterades.Resultatet visade att arbetsprocessen var effektiv; Reverse Engineering och samarbetet med kunden gav en inblick i problematiken och förståelse för produkten, Best-worst metoden gjorde att rangordningen av kraven gick snabbt utan att minska på pålitligheten och Fuzzy TOPSIS metoden effektiviserade konceptvalet samtidigt som alla inblandades åsikter blev hörda. För att effektivisera produktutvecklingen ytterligare bör fler metoder undersökas alternativt utvecklas.Konceptförslagen som konstruerades påvisade att det är möjligt att standardisera gränssnittet mellan hjullastare och redskap. Genom modulärkonstruktion kunde snabbfästet anpassas till fyra olika hjullastarmodeller. Innan vidareutveckling av snabbfästet bör fler hjullastare mätas upp och studeras.
In order to be competitive in the market, companies are forced to develop new strategies that can be adapted to ever-increasing customer requirements. The purpose of the work was to streamline product development for companies in the manufacturing industry. The objective was to develop an efficient work process for product development and apply the process to a project where a standardized fully automatic quick coupler for smaller wheel loaders would be developed for the company OilQuick.The thesis was divided into two parts. The first part deals with the development of a work process based on existing research. The second part deals with the application of the work process. Data for the application was collected through market research, meetings with customers and Reverse Engineering. Customer requirements were ranked using the Best-worst method and translated into technical specifications using the method QFD (House of Quality).Three concepts were generated based on the resulting requirements from the QFD. According to the customer requirements, the quick coupler had to be compliant with at least four different wheel loader brands in the weight span from five to eight tons. This meant that all three concepts were based on modular design, both to facilitate modifications between the wheel loader brads and to minimize the number of details that needed to be modified. All three of the concept's attachment brackets had standardized dimensions that fitted all examined wheel loader models. To determine which concept that best met the customer requirements the Fuzzy TOPSIS method was used. The final concept was adjusted based on OilQuick's requirements before the finished result was presented.The results showed that the work process was efficient and reliable and that the developed concept proposal indicates that it is possible for the company to standardize the interface between wheel loaders and attachments. With modular design the quick coupler can be adapted to the wheel loader brands that were studied. To ensure that the quick coupler can be applied to a larger variety of wheel loaders, it is necessary to examine and take measurements of more wheel loader brands before further development.

APA, Harvard, Vancouver, ISO, and other styles

Benoni, Daniel. "Business Activity Monitoring v řešení Business Intelligence." Master's thesis, Vysoká škola ekonomická v Praze, 2009. http://www.nusl.cz/ntk/nusl-15593.

Full text

Abstract:

Business Activity Monitoring (BAM) is an acronym of Gartner Inc. to describe systems that are intended to provide "Real-time access to critical business performance indicators to improve the speed and efficiency of business operations. BAM systems help enterprises improve their operational efficiency and increase the ability of understanding and responding to events that have a significant impact on their business processes. Despite the fact that most businesses today are in urgent need to improve their operating performance, BAM systems as a solution seams to don't approach. The reality is that many software vendors supplied new BAM systems solutions by simply adding new features to existing products. In addition, there are no formal standards to define which specific features of the BAM system should contain. Another problem is the lack of theoretical models to support comparative analysis between the different systems of BAM. The aim of my thesis is to contribute to the improvement of the existing theoretical basis for the use of Business Activities Monitoring (BAM) as part of BI solutions, by providing an understanding of the relationship between the needs of decision support systems in real time and current applications of systems BAM. This work provides evidence that the relationship between the Real-time Business Intelligence needs of enterprises and BAM solution is determined by the need to ensure that the BAM system deliver current Real-time information to enable BAM users, who are often operating managers directly responsible for business processes, effectively respond to referred alert, supplied by the BAM system. To increase users' ability to effectively respond to events generated by the BAM system depends primarily on two basic operational issues. First, it is necessary to ensure adequate response for BAM users, to ensure necessary actions associated with the event. Second, BAM user must be able to understand the nature of the problem associated with the event, to initiate the proper steps to resolve the problem. Here it shows that, apart from insufficient knowledge of the nature of problems, BAM system needs, beside generation alerts in very low latency, also add context to these alerts, to provide enough information for BAM users to understand the nature of the problem associated with the event.

APA, Harvard, Vancouver, ISO, and other styles

Martins, Ladigenia Tereza. "Bom e bem e suas multifunções na fala da região sul do Brasil." Florianópolis, SC, 2003. http://repositorio.ufsc.br/xmlui/handle/123456789/84608.

Full text

Abstract:

Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Comunicação e Expressão. Programa de Pós-Graduação em Linguística.
Made available in DSpace on 2012-10-20T10:53:01Z (GMT). No. of bitstreams: 1 205836.pdf: 274999 bytes, checksum: 16c340382cf3c528a5e0f66749037d31 (MD5)
Particularmente centrados nos pressupostos teóricos do Funcionalismo Lingüístico e da Teoria da Variação, procuramos nesta pesquisa descrever o comportamento discursivo das palavras bom e bem na fala de informantes da região sul do Brasil. Para isso, utilizamos dados extraídos de uma amostra composta por 288 entrevistas, pertencente ao Banco de Dados do VARSUL (Variação Lingüística Urbana no Sul do Brasil). A partir de uma análise qualitativa, apresentamos as atuações de bom e bem nos diversos contextos discursivos e caracterizamos suas respectivas funções. Ligados à propriedade comum de chamada de atenção para a informação, tratamos as lexias como variantes de uma mesma variável lingüística e, conseqüentemente, dispensamos às formas uma análise quantitativa.

APA, Harvard, Vancouver, ISO, and other styles

Silva, Cornejo Ignacio Agustín. "Modelamiento de sistema de monitoreo de rendimiento de servicios sobre arquitectura SOA." Tesis, Universidad de Chile, 2007. http://repositorio.uchile.cl/handle/2250/104774.

Full text

Abstract:

El principal objetivo de este trabajo de memoria es definir, especificar requerimientos y modelar todos los elementos, componentes, relaciones y dependencias que dan forma a una arquitectura SOA, para la capa VAS de una empresa de telefonía móvil. Sobre esta arquitectura, se definirá y planteará la estructura y organización necesaria para la implantación de un sistema BAM, de manera de cubrir las necesidades técnicas y de negocio que la arquitectura SOA no logra cubrir.

APA, Harvard, Vancouver, ISO, and other styles

Akbarieh, Arghavan. "Developing a systematic approach to investigate interoperability issues between Building Information Modeling (BIM) tools and Building Energy Modeling (BEM) tools." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/15673/.

Full text

Abstract:

Integrated building design necessitates the Architecture-Engineering-Construction-Owner-Operator (AECOO) Industry’s participants to collaborate efficiently with each other through the different phases of a building. Nevertheless, to reduce the energy consumption and CO2 emissions of a building, the emphasis is on the early design phases, since if accurate energy calculations and strategies are developed in an early design stage, the sustainable footprint of the building will be significantly reduced. That said, Building Information Modelling (BIM) promotes collaboration among the stakeholders by allowing them to design and store and access the data related to a project into one building information model. Furthermore, this model can be used for energy analysis through Building Energy Modelling (BEM) tools in the early design stages of the project, and through the whole life-cycle. For this, BIM and BEM tools must be able to communicate and exchange information with one another, seamlessly. This means that these tools should be interoperable. However, currently, there are some issues in the BIM to BEM exchange process, which obliges the user to check for the interoperability issues and fix them manually. Therefore, as a result of these interoperability issues, the BIM to BEM process in not automated, and creating an accurate BIM-based BEM is quite time-consuming, laborious and prone to human-made errors. Hence, this thesis aims to systematically investigate the interoperability issues and the state of automated data exchange between BIM and BEM tools, based on the Industry Foundation Class (IFC) exchange data schema. For this, Revit and IDA-ICE are used as BIM, and BEM tools, respectively. The outcome is the presentation of a set of interoperability issues that were found based on the investigation of 19 case studies, with some suggestions for Revit and IDA-ICE developers and future researchers in the end.

APA, Harvard, Vancouver, ISO, and other styles

Jahn, Alexandre. "Estilo de vida e percepção de bem-estar em trabalhadores da Associação Franciscana de Ensino Senhor Bom Jesus em Santa Catarina." reponame:Repositório Institucional da UFSC, 2012. http://repositorio.ufsc.br/xmlui/handle/123456789/93217.

Full text

Abstract:

Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro de Desportos, Programa de Pós-Graduação em Educação Física, Florianópolis, 2009
Made available in DSpace on 2012-10-24T18:29:16Z (GMT). No. of bitstreams: 1 276697.pdf: 303303 bytes, checksum: a001d58db7592f0a8db89e36a952d080 (MD5)
O objetivo do estudo foi analisar o estilo de vida e os indicadores de saúde de funcionários da Associação Franciscana de Ensino Senhor Bom Jesus, das cidades de Blumenau, Florianópolis e Jaraguá do Sul, do Estado de Santa Catarina. Os dados foram coletados com a aplicação de questionário já validado e aplicado com trabalhadores da indústria com as devidas adaptações para a pesquisa em escolas. Os questionários (n=327) foram distribuídos a todos os professores e funcionários das três unidades de ensino, obtendo-se um retorno de 130 questionários respondidos de forma completa. Foi utilizado o programa SPSS for Windows (versão 16.0) para análise dos dados. Quanto às características demográficas obtiveram-se os seguintes resultados: a maioria possui menos de 40 anos de idade (67,7%); são casados (61,2%); possuem pós-graduação (57,5%); recebem acima de cinco salários mínimos (60,6%) e tem um ou mais filhos (60%). Relativamente à autopercepção de saúde, somente 19,4% entre os homens e 16% entre as mulheres tem percepção negativa com relação ao seu atual estado de saúde. Mais da metade dos homens (52,8%) e das mulheres (60,9%) tem percepção positiva com relação ao bem-estar no lazer. Na percepção de bem-estar no lar os resultados mostram que 91,7% dos homens e 87% das mulheres se sentem bem ou muito bem. No item relacionado ao bem-estar no trabalho, 91,7% dos homens e 87% das mulheres tem percepção positiva. Como fatores relevantes para o bom desempenho no seu trabalho, 40,5% destacam as condições físicas e materiais adequados; 30,2% respeito por parte do cliente (alunos e pais); e 23,3% reconhecimento dos superiores. Quanto à prática de atividade física, mais de 80% dos sujeitos deslocam-se de maneira passiva para os colégios. Em geral, 76,4% realizam atividades domésticas mais pesadas em pelo menos um dia da semana. A atividade física no lazer é um hábito mais significativo entre os homens, com participação de 83,3% dos entrevistados contra 53,8% das mulheres. Comparando com pessoas de mesma idade e sexo a sua condição física, 38,9% dos homens se vêem em melhor condição e 46,2% das mulheres se vêem em condição semelhante. Quanto ao fumo, 94,5% dos entrevistados afirma não fumar e 79,8% não fazem uso de bebida alcoólica. Quanto ao IMC observou-se que 52,8% dos homens apresentam-se com excesso de peso, enquanto apenas 20,9% das mulheres encontram-se nesta condição. Observando a frequência de almoço fora de casa, 42% dos entrevistados almoçam fora todos os dias de trabalho. Já a refeição matinal é feita em número maior ou igual a cinco dias semanais por 73% dos trabalhadores. Em geral, observa-se que os sujeitos têm uma percepção bastante positiva de bem-estar no trabalho, no lar e, um pouco menos positiva, no lazer. Os indicadores do estilo de vida também se apresentam, em geral, como positivos, com os homens apresentando mais comportamentos negativos que as mulheres.

APA, Harvard, Vancouver, ISO, and other styles

Dallilo, Felipe Diniz. "Uma abordagem multinível para a obtenção de alinhamento estratégico no gerenciamento de processos de negócio." Universidade de São Paulo, 2014. http://www.teses.usp.br/teses/disponiveis/55/55134/tde-08072014-100834/.

Full text

Abstract:

Teoricamente, o Alinhamento Estratégico pode ser obtido com um bom Gerenciamento de Processos de Negócio (BPM na sigla em inglês), porém a relação entre esses temas é, na maioria das vezes, assumida implicitamente e pouco elaborada, tornando-se difícil a visualização e vínculo entre as estratégias e os modelos de processos detalhados, sendo necessário empreender pesquisas na direção de uma união efetiva dos dois temas. O presente trabalho desenvolveu um metamodelo multinível, para ligar os objetivos estratégicos com os processos de negócio da organização através da modelagem de processos de negócio. O trabalho conceitual foi acrescido por uma ferramenta de suporte à modelagem que permite a geração de modelos com base no metamodelo multinível e também a representação dos modelos em diferentes formas de abstração. A abordagem foi aplicada em uma grande multinacional e posteriormente foi conduzida uma avaliação experimental no qual foram realizadas entrevistas com funcionários de diferentes níveis hierárquicos para validar a eficiência e eficácia do trabalho desenvolvido. Como resultado foi possível constatar não apenas a efetividade em alcançar os objetivos propostos como também a facilidade na utilização e compreensão da abordagem em níveis devido a simplicidade na representação dos elementos e seus possíveis relacionamentos
Theoretically, the Strategic Alignment can be accomplished with a good Business Process Management, but the relationship between these themes is, most often, implicitly assumed and little developed, making it difficult to visualize and link between the strategies and the models of detailed processes, being necessary to undertake research towards an effective union of the two themes. This study developed a multilevel metamodel for connecting strategic objectives with organizational business processes through modeling of business processes. The conceptual work was increased by a support tool for modeling that allows the generation of models based on multilevel metamodel and also the representation of models in different forms of abstraction. The approach was applied in a large multinational and was subsequently conducted an experimental evaluation in which interviews with employees from different hierarchical levels were performed to validate the efficiency and effectiveness of their work. As a result it was possible to not only the effectiveness in achieving the proposed objectives as well as the ease of use and understanding of the tiered approach because of the simplicity in the representation of the elements and their possible relationships

APA, Harvard, Vancouver, ISO, and other styles

Liebert, Andreas. "Industry 4.0 – the intended impact of Cyber Physical Systems in a Smart Factory on the daily business processes : A Study on BMW (UK) Manufacturing Limited." Thesis, Linnéuniversitetet, Institutionen för organisation och entreprenörskap (OE), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-54407.

Full text

Abstract:

Purpose: The purpose of this paper is to identify the opportunities that Industry 4.0 brings within the framework of applying Cyber Physical Systems in an environment of a Smart Factory. This paper shall identify the changes within daily business processes and the impact of these changes on the daily business life. Design/Methodology/Approach: The research is carried out as a case study research. Due to a qualitative approach for this case study interviews are conducted and the results are analyzed and discussed. Findings: Industry 4.0 will change the way we are working today and influence businesses and business processes in many ways. Data handling, processes and efficiency will change and the way we perceive manufacturing will change in a long term view. Further Research: It would be recommended to expand this research by conducting more research in this particular field as well as impacts on the employee should be studied more in detail.

APA, Harvard, Vancouver, ISO, and other styles

Lindén, Anna, and Peter Dehlin. "BIM i planeringsarbetet : Effective planning by using BIM." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Byggnadsteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-19131.

Full text

Abstract:

Abstract The importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today. A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies. Therefore inexpensive software is needed so that it will be profitable to use 4D models even in the production of small projects. The survey which aims to identify planning in the construction industry shows that planning varies between the different sectors, but also that planning technique depends on the knowledge of those who actually carry out the planning. The conclusion is that education in planning techniques and computer aided planning tools is needed to implement BIM in the planning process. With a detailed schedule and a BIM model which is adjusted to the construction of the building, Navisworks Simulate is a suitable program to use in the creation of Building Information Models. When using Navisworks Simulate to create a 4D model, the natural choice would be Navisworks Freedom software for visualization of the project in the production. This is because the Navisworks creates its own file format, which can only be opened in software created by Autodesk. This study was aimed to improve three week planning and increase the use of assimilating feedback by using BIM in the construction industry. The conclusion is that the choice of software for the creation of a 4D model affects the application that later can be used for visualization.
Sammanfattning Vikten av god produktionsplanering ligger till grund för dels den ekonomiska produktionskostnaden, dels tidsaspekten i projektet. Som bakgrund till rapporten har planering i byggproduktionen studerats med syftet att kartlägga hur treveckorsplaneringen ser ut inom bygg- och anläggningsbranschen i dagsläget. En fallstudie har genomförts i Navisworks Simulate för att undersöka om programvaran lämpar sig att sammankoppla treveckorsplanering med BIM-modell för att skapa en 4D-modell. 4D-modellen används för att på ett tydligt vis visualisera arbetet i projektet. För att utnyttja modellen krävs investeringar i utrustning och programvaror vilket innebär dyra kostnader för företagen. För visualisering av projektet eftersträvas därför en programvara till låg kostnad så att det ska bli lönsamt att använda 4D-modellen i produktionen även på mindre projekt. Den utredning som genomförts med syftet att kartlägga planeringsarbetet inom bygg- och anläggningsbranschen visar att planeringsarbetet varierar dels mellan bygg- och anläggningsprojekt men även att planeringsteknik beror på kunskapssnivå hos den som ska genomföra planeringsarbetet. Slutsatsen är att utbildning i planeringsteknik och datorstödda planeringsverktyg behövs för att kunna implementera BIM i planeringsarbetet. Med en detaljerad tidsplanering och produktionsanpassad projektering är Navisworks Simulate ett utmärkt program att använda vid skapandet av BIM-modeller. Vid användandet av Navisworks Simulate för skapande av 4D-modellen är Navisworks Freedom det naturliga valet av program för visualisering ute på arbetsplatsen i produktionen. Detta beror på att Navisworks skapar sitt eget filformat, vilket endast går att öppna i programvaror från Autodesk. Slutsatsen blir att valet av programvara för skapandet av en 4D-modell påverkar vilka program som senare kan användas för visualisering. Examensrapporten syftar till att förbättra treveckorsplaneringen, samt att öka utnyttjandet av erfarenhetsåterföringen inom produktionen genom användande av CAD-samordning och BIM.

APA, Harvard, Vancouver, ISO, and other styles

AL-Hindi, Rafah, and Yousef Yousef. "BIM Byggnadsinformationsmodellering BIM-användning hos de olika aktörerna." Thesis, Örebro universitet, Institutionen för naturvetenskap och teknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-61162.

Full text

Abstract:

Clarus arkitekter som projekteringsföretag får ofta beställningar från entreprenörer och beställare där de efterfrågar en BIM-modell. I de flesta fallen så används inte BIM modellen helt utan man tar fram 3D-ritningar eller 2D-ritningar. Då ställs frågan “Har beställaren/entreprenören rätt uppfattning om vad BIM är?” Olika aktörer har olika riktlinjer och krav som projektören ska följa. Frågan som arbetet kommer svara på är “hur ska konsulten göra för att på bästa sätt kunna erbjuda rätt tjänst samt mot vilka mål ska konsulten jobba.” Syftet med den här fallstudien är att ta reda på hur BIM användningen skulle kunna underlätta arbetet samt kommunikationen mellan de olika aktörerna som är inblandade i ett byggprojekt. Att undersöka hur kompetensnivån ligger till hos Beställare, Entreprenör och projektörer/arkitekter och svara på frågan “Vad ligger bakom kompetensskillnaden som finns?” Arbetet inleddes med litteraturstudier för insamling och sammanställning av information. Frågor kommer att ställas upp för att senare kunna användas under intervjuerna med olika personer från olika företag. Intervjuerna kommer att ske med bland annat med individer från konsult-, entreprenör- och beställare företag. Intresset att använda BIM är stort i branschen men tyvärr så finns det stor kompetensbrist. Beställare och entreprenörer har planer att börja använda sig av BIM mer vilket kommer att ske de kommande åren, men i nuläget så vill man inte ta nya risker och föredrar att använda sig av traditionella metoder som är mer säkra. För att man skulle kunna tillämpa BIM mer i byggbranschen så behövs det mer kunskap.
Clarus Arkitekter as design companies often receive orders from contractors and clients asking for a BIM model. In most cases, the BIM model is not fully used, but 3D drawings or 2D drawings are available. Then asks the question "Does the client / contractor have the correct understanding of what BIM is?" Different players have different guidelines and requirements that the projector should follow, which can be perceived as defective by the projector just to know what is demanded from each client. The question the thesis will answer is "How should the consultant do the best to offer the right service and what goals the consultant will do. The purpose of this master thesis is to find out how BIM usage could facilitate the work as well as the communication between the various actors who is involved in a construction project. To investigate how the level of competence lies with the Client, Entrepreneur and Projectors / Architects and answerthe question "what is behind the skill difference that exists?". The work began with literature studies for the collection and compilation of information. Questions will be set up to later use them during interviews with different people from different companies. The interviews will take place with individuals from consultancy, contractor and client company. The interest in using BIM is high in the industry, but unfortunately there is a great deal of skills shortage. Customers and entrepreneurs plan to start using BIM more, which will happen in the coming years, but now, they do not want to take new risks and prefer to use traditional methods that are more secure. To be able to apply BIM more in the construction industry, more knowledge is needed.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "BWM"

Keller, Anna. Bim, Bam y Bum. Bucaramanga, Colombia: Fundación El Libro Total, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Wasielewski, Maciej. Bim, bam, bom, mogę wszystko!: Historia Bogusława Meca. Warszawa: Agora S.A., 2013.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Generazione Bim bum bam: Risposte precise a domande precise : autobiografia di 10 milioni di italiani. Milano: Mondadori, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Aresu, Alessandro. Generazione Bim bum bam: Risposte precise a domande precise : autobiografia di 10 milioni di italiani. Milano: Mondadori, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

ill, Ephraim Shelly Schonebaum, ed. Bim and Bom: A Shabbat tale. Rockville, MD: Kar-Ben Copies, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

illustrator, Iwai Melissa, ed. Bim and Bom: A Shabbat tale. Minneapolis: Kar-Ben, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Bortnowska, Katarzyna. Białoruski postmodernizm: Liryka "pokolenia Bum-Bam-Litu". Warszawa: Wydawnictwa Uniwersytetu Warszawskiego, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Jan, Koźbiał, ed. Białoruski postmodernizm: Liryka "pokolenia Bum-Bam-Litu". Warszawa: Wydawnictwa Uniwersytetu Warszawskiego, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Garcia, Walter. Bim bom: A contradição sem conflitos de João Gilberto. São Paulo, SP: Paz e Terra, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Merriam, Eve. Bam, bam, bam. New York: H. Holt, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "BWM"

Augustsson, Lennart. "BWM." In Functional Programming, Glasgow 1991, 36–50. London: Springer London, 1992. http://dx.doi.org/10.1007/978-1-4471-3196-0_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Khan, Shahbaz, Mohd Imran Khan, and Abid Haleem. "Prioritisation of Challenges Towards Development of Smart Manufacturing Using BWM Method." In Internet of Things (IoT), 409–26. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-37468-6_22.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Achki, Samira, and Layla Aziz. "COVID-19 Patient Classification Strategy Using a Hybrid BWM-SVM Model." In Innovations in Smart Cities Applications Volume 4, 1210–19. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-66840-2_92.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Kumar, Anish, Sachin Kumar Mangla, Pradeep Kumar, and Yasanur Kayikci. "Investigating Enablers to Improve Transparency in Sustainable Food Supply Chain Using F-BWM." In Advances in Intelligent Systems and Computing, 567–75. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-51156-2_65.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Singh, Ashutosh, Mohammad Asjad, Piyush Gupta, Zahid Akhtar Khan, and Arshad Noor Siddiquee. "Measuring the Relative Importance of Reconfigurable Manufacturing System (RMS) Using Best–Worst Method (BWM)." In Lecture Notes in Mechanical Engineering, 253–75. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5463-6_24.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Jou, Jonathan D., Swati Jain, Ivelin Georgiev, and Bruce R. Donald. "BWM*: A Novel, Provable, Ensemble-Based Dynamic Programming Algorithm for Sparse Approximations of Computational Protein Design." In Lecture Notes in Computer Science, 154–66. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-16706-0_16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Sambale, R., P. Metz-Stavenhagen, and V. Echtermeyer. "Die Behandlung thorako-lumbaler Wirbelsäulen- verletzungen mit einem neuen multisegmentalen modularen Wirbelsäuleninstrumentarium (BWM) — erste klinische Erfahrungen." In Hefte zur Zeitschrift „Der Unfallchirurg“, 1594–600. Berlin, Heidelberg: Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-78055-4_366.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Gul, Muhammet, Suleyman Mete, Faruk Serin, and Erkan Celik. "Fine–Kinney-Based Occupational Risk Assessment Using Fuzzy Best and Worst Method (F-BWM) and Fuzzy MAIRCA." In Fine–Kinney-Based Fuzzy Multi-criteria Occupational Risk Assessment, 13–30. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-52148-6_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Hohwiller, Jörg, Diethelm Schlegel, Gunter Grieser, and Yvette Hoekstra. "Integration of BPM and BRM." In Lecture Notes in Business Information Processing, 136–41. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-25160-3_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Arnaiz-Villena, A., M. Belvedere, F. Decary, M. Fotino, E. Heise, V. Hogan, M. Martinetti, et al. "Antigen Society #15 Report (Bw4 and Bw6)." In Immunobiology of HLA, 214–17. New York, NY: Springer New York, 1989. http://dx.doi.org/10.1007/978-1-4612-3552-1_37.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "BWM"

Wu, Xuehai, John G. Georgiadis, and Assimina A. Pelegri. "Brain White Matter Model of Orthotropic Viscoelastic Properties in Frequency Domain." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-12182.

Full text

Abstract:

Abstract Finite element analysis is used to study brain axonal injury and develop Brain White Matter (BWM) models while accounting for both the strain magnitude and the strain rate. These models are becoming more sophisticated and complicated due to the complex nature of the BMW composite structure with different material properties for each constituent phase. State-of-the-art studies, focus on employing techniques that combine information about the local axonal directionality in different areas of the brain with diagnostic tools such as Diffusion-Weighted Magnetic Resonance Imaging (Diffusion-MRI). The diffusion-MRI data offers localization and orientation information of axonal tracks which are analyzed in finite element models to simulate virtual loading scenarios. Here, a BMW biphasic material model comprised of axons and neuroglia is considered. The model’s architectural anisotropy represented by a multitude of axonal orientations, that depend on specific brain regions, adds to its complexity. During this effort, we develop a finite element method to merge micro-scale Representative Volume Elements (RVEs) with orthotropic frequency domain viscoelasticity to an integrated macro-scale BWM finite element model, which incorporates local axonal orientation. Previous studies of this group focused on building RVEs that combined different volume fractions of axons and neuroglia and simulating their anisotropic viscoelastic properties. Via the proposed model, we can assign material properties and local architecture on each element based on the information from the orientation of the axonal traces. Consecutively, a BWM finite element model is derived with fully defined both material properties and material orientation. The frequency-domain dynamic response of the BMW model is analyzed to simulate larger scale diagnostic modalities such as MRI and MRE.

APA, Harvard, Vancouver, ISO, and other styles

Yazdani, Morteza, Violeta Doval Hernandez, Prasenjit Chatterjee, and Edmundas Kazimieras Zavadskas. "A statistical approach for improvement of Best Worst Method (BWM)." In Sustainable Decisions in Built Environment. VGTU Technika, 2019. http://dx.doi.org/10.3846/colloquium.2019.002.

Full text

Abstract:

This paper endeavors to measure the consistency of a decision-making tool, popularly known as Best Worst Method (BWM), which is one of the latest developments in multiple-criteria decision analysis (MCDA). BWM is finding a vast arra of applications in the literature. Several investigators have extended this tool. BWM measures the weight of decision-making criterion and is recognized as a subjective decision tool. The first step in this method is to find the best and worst criterion, while we suppose several experts are asked to present their evaluation over set of criteria. The aim is to measure how these judgments are consistent and reliable. So, we statistically (using χ2 distribution) add a pre-evaluation to experts’ opinion and analyze whether the agreement of experts’ opinions is satisfactory and group opinion is established. This action improves the quality of the decision-making process by incorporating the reliability evaluation of experts’ idea. This extension for BWM helps decision makers in facilitating and getting results that are more consistent for criteria evaluation. We present examples in sustainable construction and architecture project.

APA, Harvard, Vancouver, ISO, and other styles

"ROUTE EVALUATION FOR HAZMAT TRANSPORTATION BASED ON BWM-EDAS METHODS." In Transport for Today's Society. Faculty of Technical Sciences Bitola, 2019. http://dx.doi.org/10.20544/tts2018.p44.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Chunhui, Li, Zhang Xuehui, Xiao Jianwei, Zhou Bo, Cheng Lei, and Zhao Nan. "Research in Ballast Water Exchange for a Jack-Up Drilling Unit." In ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/omae2018-77342.

Full text

Abstract:

A new IMO Ballast Water Management Convention was adopted and came into force in 8th Sep. 2017. The IBWMC (International Ballast Water Convention) covered four major vessel types: Single/Double Hull Tanker, Bulk Carrier and Containership. Research in BWM (Ballast Water Management) of Jack-up Platform is rare. The Jack up was built prior to the date which Convention comes into force and was delivered after date, so BWM of the Jack up is focused on Ballast Water Exchange Plan, which should be approved by Flag State or by CLASS (if authorized by Flag State). In this paper, a sequential method is hosen to exchange ballast water, and calculation is carried out to ensure that the stability is maintained in whole process.

APA, Harvard, Vancouver, ISO, and other styles

Fearnley, Robin. "Lessons Learned in Ballast Water Treatment Equipment Retrofit and Commissioning." In IMarEST Ballast Water Technology Conference. IMarEST, 2017. http://dx.doi.org/10.24868/bwtc6.2017.006.

Full text

Abstract:

Ratification of the International Maritime Organization (IMO) International Convention for the Control and Management of Ships' Ballast Water and Sediments (BWMC)[i] has now forced the hand of operators and ship owners to comply with the BWM, and without a great deal of time to react. The need to integrate and operate Ballast Water Treatment (BWT) Systems on In-Service ships, however, is not new, and BMT have recent and relevant experience in end-to-end BWT system solutions. In 2011 BMT Defence Services Ltd (BMT) produced the installation specification to enable A and P Falmouth Ltd (A and P) to carry out a ballast water treatment plant retrofit installation on the RFA Bay Class ships (i.e. RFA MOUNTS BAY, LARGS BAY and CARDIGAN BAY), enabling the ship to be approved and operated in compliance with the BWMC. In addition, BMT produced documentation to enable A and P to arrange, manage and perform the necessary test, trials and commissioning to prove the equipment installation and that it can be operated in accordance with the requirements of the BWMC. The objective of this paper is to take the reader through the process of design and embodiment of a BWT system retrofit on a relatively complex (with respect to the ballast system) ship. The Bay Class ships are Landing Ship Dock (Auxiliary) ships with separate forward and aft ballast systems (to allow the ships to function in their amphibious roles by way of their stern dock), and a ship wide Ballast Stripping system. Key design and engineering considerations are discussed below and recommendations for the installation of a ballast water treatment system are also offered. International Convention for the Control and Management of Ships' Ballast Water and Sediments, International Maritime Organization, Adoption: 13 February 2004; Entry into force: 8 September 2017.

APA, Harvard, Vancouver, ISO, and other styles

Ma, Xue, Nan Li, Xin Tao, Hui Xu, Fei Peng, Yanying Che, and Sen Guo. "The optimal selection of electrochemical energy storage using Bayesian BWM and TOPSIS method." In 2019 6th International Conference on Information Science and Control Engineering (ICISCE). IEEE, 2019. http://dx.doi.org/10.1109/icisce48695.2019.00127.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Wang, Min, Chunyan Feng, and Tiankui Zhang. "Multiple Utility Factors-Based Parallel Packet Scheduling for Broadcast/Unicast in BWM Systems." In 2011 7th International Conference on Wireless Communications, Networking and Mobile Computing (WiCOM). IEEE, 2011. http://dx.doi.org/10.1109/wicom.2011.6036707.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Hashemkhani Zolfani, Sarfaraz, Prasenjit Chatterjee, and Morteza Yazdani. "A structured framework for sustainable supplier selection using a combined BWM-CoCoSo model." In Contemporary Issues in Business, Management and Economics Engineering. Vilnius Gediminas Technical University, 2019. http://dx.doi.org/10.3846/cibmee.2019.081.

Full text

Abstract:

Purpose – sustainability in industrial organizations is becoming one of the predominant concepts in the context of modern industrialization due to global warming, economic significance, and social awareness. These have prompted a huge concern toward sustainable supply chain management (SSCM) to be adopted and promoted as an innovative business model. Supplier evaluation and selection play a significant role in SSCM for taking appropriate procurement decisions. Research methodology – a hybrid MADM model based on Best Worst Method (BWM) and Combined Comprise Solution (CoCoSo) method. Findings – a case study in the steel industry is presented to demonstrate the effectiveness of the proposed approach. The results show the potentiality of the proposed model in resolving complex sustainability issues in the SCM environment. Research limitations – other weighting techniques like the analytic network process (ANP) and decision making trial and evaluation laboratory (DEMATEL) approaches can also be combined and performances can be compared. Practical implications – the proposed model can be used by the organizations to select the most appropriate suppliers who contribute to the movement of the SC towards sustainability. Originality/Value – a multi-criteria evaluation model has been proposed for solving a sustainable supplier selection problem while considering economic, environmental and social criteria simultaneously by integrating BWM-COCOSO methods

APA, Harvard, Vancouver, ISO, and other styles

Luo, Yuan, Xi Chen, and Yaya Sun. "A Fuzzy Linguistic Method for Evaluating Doctors of Online Healthcare Consultation Platform Using BWM and Prospect Theory." In 2019 IEEE 6th International Conference on Industrial Engineering and Applications (ICIEA). IEEE, 2019. http://dx.doi.org/10.1109/iea.2019.8715035.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Wu, Xuehai, and Assimina A. Pelegri. "Deep 3D Convolution Neural Network Methods for Brain White Matter Hybrid Computational Simulations." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24664.

Full text

Abstract:

Abstract Material properties of brain white matter (BWM) show high anisotropy due to the complicated internal three-dimensional microstructure and variant interaction between heterogeneous brain-tissue (axon, myelin, and glia). From our previous study, finite element methods were used to merge micro-scale Representative Volume Elements (RVE) with orthotropic frequency domain viscoelasticity to an integral macro-scale BWM. Quantification of the micro-scale RVE with anisotropic frequency domain viscoelasticity is the core challenge in this study. The RVE behavior is expressed by a viscoelastic constitutive material model, in which the frequency-related viscoelastic properties are imparted as storage modulus and loss modulus for the composite comprised of axonal fibers and extracellular glia. Using finite elements to build RVEs with anisotropic frequency domain viscoelastic material properties is computationally very consuming and resource-draining. Additionally, it is very challenging to build every single RVE using finite elements since the architecture of each RVE is arbitrary in an infinite data set. The architecture information encoded in the voxelized location is employed as input data and is consequently incorporated into a deep 3D convolution neural network (CNN) model that cross-references the RVEs’ material properties (output data). The output data (RVEs’ material properties) is calculated in parallel using an in-house developed finite element method, which models RVE samples of axon-myelin-glia composites. This novel combination of the CNN-RVE method achieved a dramatic reduction in the computation time compared with directly using finite element methods currently present in the literature.

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "BWM"

O'Donnell, James T., Tobias Maile, Cody Rose, Natasa Mrazovic, Elmer Morrissey, Cynthia Regnier, Kristen Parrish, and Vladimir Bazjanac. Transforming BIM to BEM: Generation of Building Geometry for the NASA Ames Sustainability Base BIM. Office of Scientific and Technical Information (OSTI), January 2013. http://dx.doi.org/10.2172/1168736.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Benmerrouche, Mo. 06-BM BMM Beamline Radiation Shielding Analysis. Office of Scientific and Technical Information (OSTI), May 2017. http://dx.doi.org/10.2172/1493172.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Benmerrouche, Mo. 06-BM BMM Beamline Radiation Shielding Analysis - Revised. Office of Scientific and Technical Information (OSTI), July 2017. http://dx.doi.org/10.2172/1493174.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Revill, James, Alisha Anand, and Giacomo Persi Paoli. Exploring Science and Technology Review Mechanisms Under the Biological Weapons Convention. The United Nations Institute for Disarmament Research, June 2021. http://dx.doi.org/10.37559/sectec/2021/sandtreviews/01.

Full text

Abstract:

Since the Biological Weapons Convention (BWC) opened for signature in 1972, biology and other converging disciplines have advanced considerably. These changes could have profound implications for a science-based disarmament agreement like the BWC. To address changes in biology and biotechnology, BWC States Parties have established processes to review developments in science and technology (S&T), including annual expert meetings on this topic. However, shortcomings are evident in the current approaches and many BWC States Parties have expressed support for a more systematic review of science and technology under the Convention. This study seeks to inform discussions on establishing a dedicated and systematic S&T review process under the BWC through an examination of existing S&T review-type mechanisms employed in different regimes beyond the BWC, a survey of States Parties views on a possible review mechanism and a study of past and present discourse on this issue in the BWC. Based on the analysis conducted, this study also presents options for BWC States Parties to consider ahead of the Ninth BWC Review Conference.

APA, Harvard, Vancouver, ISO, and other styles

Yan, Jianxun, and Dan Dale. TRIUMF BLM. Office of Scientific and Technical Information (OSTI), January 2019. http://dx.doi.org/10.2172/1490793.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Pinayev, Igor. BPM Button Testing. Office of Scientific and Technical Information (OSTI), July 2018. http://dx.doi.org/10.2172/1480939.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Church, M. BPM System Improvements. Office of Scientific and Technical Information (OSTI), April 1991. http://dx.doi.org/10.2172/983980.

Full text

APA, Harvard, Vancouver, ISO, and other styles

A. Alsaed. BWR AXIAL PROFILE. Office of Scientific and Technical Information (OSTI), July 2005. http://dx.doi.org/10.2172/862029.

Full text

APA, Harvard, Vancouver, ISO, and other styles

J. Huffer. BWR AXIAL PROFILE. Office of Scientific and Technical Information (OSTI), September 2004. http://dx.doi.org/10.2172/862152.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Menga P., L. Ahrens, and R. Schroeder. AGS BPM Tests. Office of Scientific and Technical Information (OSTI), August 2007. http://dx.doi.org/10.2172/1061879.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

Contents

Academic literature on the topic 'BWM'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Journal articles on the topic "BWM"

Dissertations / Theses on the topic "BWM"

Books on the topic "BWM"

Book chapters on the topic "BWM"

Conference papers on the topic "BWM"

Reports on the topic "BWM"