Relevant bibliographies by topics / Bypass diode

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'Bypass diode'

Author: Grafiati
Published: 4 June 2021
Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Bypass diode.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Bypass diode"

1

Shin, Woo, Suk Ko, Hyung Song, Young Ju, Hye Hwang, and Gi Kang. "Origin of Bypass Diode Fault in c-Si Photovoltaic Modules: Leakage Current under High Surrounding Temperature." Energies 11, no. 9 (September 12, 2018): 2416. http://dx.doi.org/10.3390/en11092416.

Full text
Abstract:
Bypass diodes have been widely utilized in crystalline silicon (c-Si) photovoltaic (PV) modules to maximize the output of a PV module array under partially shaded conditions. A Schottky diode is used as the bypass diode in c-Si PV modules due to its low operating voltage. In this work, we systematically investigated the origin of bypass diode faults in c-Si PV modules operated outdoors. The temperature of the inner junction box where the bypass diode is installed increases as the ambient temperature increases. Its temperature rises to over 70 °C on sunny days in summer. As the temperature of the junction box increases from 25 to 70 °C, the leakage current increases up to 35 times under a reverse voltage of 15 V. As a result of the high leakage current of the bypass diode at high temperature, melt down of the junction barrier between the metal and semiconductor has been observed in damaged diodes collected from abnormally functioning PV modules. Thus, it is believed that the constant leakage current applied to the junction caused the melting of the junction, thereby resulting in a failure of both the bypass diode and the c-Si PV module.
APA, Harvard, Vancouver, ISO, and other styles
2

Amin, Hajizadeh, and Warrier Anil Kumar Jishnu. "Parameter Identification and Effect of Partial Shading on a Photovoltaic System." E3S Web of Conferences 64 (2018): 06006. http://dx.doi.org/10.1051/e3sconf/20186406006.

Full text
Abstract:
Partial shading cause significant losses to the performance of a photovoltaic (PV) system. So, it is imperative to study effects of partial shading; for that a two-diode model of the experimental setup made. Upon verifying the model with the experimental parameters, a MATLAB/Simulink model is made based on this model. Various shading patterns, the effect of bypass diodes; the effect of overlapping bypass diode is studied on this MATLAB/Simulink model. It is found out that the reduction in power loss is depended on the location of the shaded cell but not the area of the shaded cell. Also, the over-lapping bypass diode configuration has a slight improvement in the PV performance compared to the non-overlapping bypass diode configuration. An experimental test is also conducted by applying different shading pattern and they proves the results are compatible with the simulated results.
APA, Harvard, Vancouver, ISO, and other styles
3

Álvarez-Tey, Germán, José Antonio Clavijo-Blanco, Álvaro Gil-García, Rafael Jiménez-Castañeda, and Carmen García-López. "Electrical and Thermal Behaviour of Crystalline Photovoltaic Solar Modules in Shading Conditions." Applied Sciences 9, no. 15 (July 27, 2019): 3038. http://dx.doi.org/10.3390/app9153038.

Full text
Abstract:
The shadow effect caused by nearby objects or the lack of cleaning significantly affects the performance of photovoltaics (PV) installations. This article analyses the bypass diode electrical behaviour and the thermal response of a PV crystalline module under shading or soiling conditions. PV cells of different substrings were covered progressively to simulate the effect of shading or soiling while a programmable electronic DC load was connected to a PV module to set an operating voltage. Three different tests were made to different PV crystalline technology. The paper characterizes in real conditions the I–V curve, bypass diode current, and front and back side PV cell temperature with contact sensor and infrared (IR) thermography, respectively. The results showed that the operation voltage established in the PV module defines the electrical bypass diode current and thermal response under normal operating conditions, shading or soiling. To show the bypass diode behaviour in such conditions, I–V curves were obtained, pointing out the value of the current that flows through bypass diodes in the whole voltage range.
APA, Harvard, Vancouver, ISO, and other styles
4

Fadliondi, Fadliondi, Haris Isyanto, and Budiyanto Budiyanto. "Bypass Diodes for Improving Solar Panel Performance." International Journal of Electrical and Computer Engineering (IJECE) 8, no. 5 (October 1, 2018): 2703. http://dx.doi.org/10.11591/ijece.v8i5.pp2703-2708.

Full text
Abstract:
The ouput power of solar panel that decreased due to shading has been improved using bypass diode method. The placement of bypass diodes increased the output current and power. New peaks and maximum powerpoints on the current-svoltage characteristics and power-voltage characteristics were observed. Without bypass diodes, the maximum output power was only around 50 W. After placing bypass diodes, the first peak around 115 W and second peak around 150 W appeared at voltage of around 31 V and 40 V, respectively.
APA, Harvard, Vancouver, ISO, and other styles
5

Ren, Huixue, and Peide Han. "Necessity Analysis of Bypass Diode for AC Module under Partial Shading Condition." Energies 14, no. 16 (August 6, 2021): 4778. http://dx.doi.org/10.3390/en14164778.

Full text
Abstract:
To protect a photovoltaic module from the hot spot effect more efficiently, an AC (alternating current) module that contains a module-level MPPT (maximum power point tracking) has been put forward. In this paper, operation states of shadowed solar cells and relevant bypass diodes were studied through MATLAB/Simulink tools, and a commercial PV module was used to reveal the temperature change when working at different LMPP (local maximum power point). Experiment results show that bypass diode can reduce power loss for the AC module to some extent but has a limited effect on protecting the AC module from the hot spot effect. Instead, it is more likely to form a local hot spot when the bypass diode turns on, and the worst shading condition for the AC module with bypass diode is about 46.5% during work states.
APA, Harvard, Vancouver, ISO, and other styles
6

Vieira, Romênia G., Fábio M. U. de Araújo, Mahmoud Dhimish, and Maria I. S. Guerra. "A Comprehensive Review on Bypass Diode Application on Photovoltaic Modules." Energies 13, no. 10 (May 14, 2020): 2472. http://dx.doi.org/10.3390/en13102472.

Full text
Abstract:
Solar photovoltaic (PV) energy has shown significant expansion on the installed capacity over the last years. Most of its power systems are installed on rooftops, integrated into buildings. Considering the fast development of PV plants, it has becoming even more critical to understand the performance and reliability of such systems. One of the most common problems faced in PV plants occurs when solar cells receive non-uniform irradiance or partially shaded. The consequences of shading generally are prevented by bypass diodes. A significant number of studies and technical reports have been published as of today, based on extensive experience from research and field feedbacks. However, such material has not been cataloged or analyzed from a perspective of the technological evolution of bypass diodes devices. This paper presents a comprehensive review and highlights recent advances, ongoing research, and prospects, as reported in the literature, on bypass diode application on photovoltaic modules. First, it outlines the shading effect and hotspot problem on PV modules. Following, it explains bypass diodes’ working principle, as well as discusses how such devices can impact power output and PV modules’ reliability. Then, it gives a thorough review of recently published research, as well as the state of the art in the field. In conclusion, it makes a discussion on the overview and challenges to bypass diode as a mitigation technique.
APA, Harvard, Vancouver, ISO, and other styles
7

Utami, Dwi Prima Putri, and Antonius Rajagukguk. "Analysis Of Power Generation Photovoltaic Array 9×10 Wp Under Shading Effect." International Journal of Electrical, Energy and Power System Engineering 3, no. 1 (February 28, 2020): 13–16. http://dx.doi.org/10.31258/ijeepse.3.1.13-16.

Full text
Abstract:
There are several problems that can interfere with the performance of large-scale PV. One that enhances PV performance is shading on a PV module, that make interferes PV performance. This research studied about the effect of shading on the performance of large-scale PV systems through testing a 9 × 10 Wp miniature PV array and simulation using Matlab software. The use of diodes on a PV module can be done to prevent damage to the PV module due to shading. Through the power-voltage (P-V) and current-voltage (I-V) characteristic curves the effect of shading and the use of bypass and blocking diodes can be determined. Shading effect gave in a decrease in power in the PV module. From the results of this study note that the bypass diode and blocking diode output power generated by the PV module can be optimal.
APA, Harvard, Vancouver, ISO, and other styles
8

Puca, Alfredo, Alessio Albanese, Giuseppe Esposito, Giulio Maira, Barbora Tirpakova, Giacomo Rossi, Alice Mannocci, and Roberto Pini. "DIODE LASER-ASSISTED CAROTID BYPASS SURGERY." Neurosurgery 59, no. 6 (December 1, 2006): 1286–95. http://dx.doi.org/10.1227/01.neu.0000249217.27214.ec.

Full text
Abstract:
Abstract OBJECTIVE Conventional suturing methods of microvascular anastomosis are associated with various degrees of vascular wall damage that can lead to thrombosis and bypass occlusion. An experimental model of double end-to-side venous graft anastomosis on the common carotid artery was set up to compare conventional suturing methods with a low-power diode laser vascular welding technique. METHODS The experiments were performed on 40 rabbits that underwent implantation of a 15-mm segment of jugular vein on the common carotid artery. The proximal end-to-side suture was performed by eight interrupted stitches; the distal suture, which was done using a laser welding technique, was supported by four stay sutures. The animals were evaluated after 2 days (n = 15), 9 days (n = 15), and 30 days (n = 10). The vascular segments were excised and subjected to histological, immunohistochemical, and ultrastructural evaluation. RESULTS The average clamping time to perform both anastomoses was 35 minutes. At the end of the follow-up period, one case of complete occlusion was observed after 9 days and one case was observed after 30 days. Surgical observations and pathological evaluation indicated that adoption of the laser welding technique reduced operative time and bleeding. Histologically, a reduction of thrombosis, inflammation, myointimal hyperplasia, and dystrophic calcification was observed in laser-assisted anastomoses. A better preservation of the endothelium was also evident in laser-treated anastomoses. The observed differences were deemed statistically significant (P< 0.05). CONCLUSION Our study demonstrated the efficacy of diode laser welding in improving surgical techniques of high-flow bypass and in reducing the vascular wall damage observed with conventional methods.
APA, Harvard, Vancouver, ISO, and other styles
9

Tarabsheh, Anas Al, Muhammad Akmal, and Mohammed Ghazal. "Improving the Efficiency of Partially Shaded Photovoltaic Modules without Bypass Diodes." Electronics 10, no. 9 (April 29, 2021): 1046. http://dx.doi.org/10.3390/electronics10091046.

Full text
Abstract:
Photovoltaic (PV) modules comprise bypass diodes to limit hotspot formation. However, they suffer from performance reduction in the presence of partial shading. This paper proposes external circuitry to control the connection type (series/parallel) of the PV cells through a pair of on/off switches resulting in three different operation modes. Mode 1 represents the typical 36 series-connected cells, while mode 2 represents two parallel-connected strings, and mode 3 maximizes the output current where the four strings are connected in parallel. The added values of the approach are that (1) the output current of the PV module can be increased without the need for a buck-boost converter and (2) the partial shading has less impact on the output power than the adoption of bypass diodes. This work shows that simulating three monocrystalline PV modules (120 W, 200 W, and 241 W), consisting of 36, 60, and 72 series-connected cells, lose about 74% when one cell has 80% shading in the absence of bypass diodes. The application of a bypass diode for each pair of strings in the PV module improves this decrease to 61.89%, 40.66%, and 39.47%, respectively. According to our proposed approach, this power loss can be significantly decreased to 19.59%, 50%, and 50.01% for the three PV modules, respectively, representing more than a 42% improvement compared to bypass diodes.
APA, Harvard, Vancouver, ISO, and other styles
10

He, Wei, Fengshou Liu, Jie Ji, Shengyao Zhang, and Hongbing Chen. "Safety Analysis of Solar Module under Partial Shading." International Journal of Photoenergy 2015 (2015): 1–8. http://dx.doi.org/10.1155/2015/907282.

Full text
Abstract:
Hot spot often occurs in a module when the qualities of solar cells mismatch and bypass diodes are proved to be an efficient alternative to reduce the effect of hot spot. However, these principles choosing a diode are based on the parameters of bypass diodes and PV cells without consideration of the maximum heating power of the shaded cell, which may cause serious consequences. On this basis, this paper presents a new approach to investigate partially shaded cells in different numbers of PV cells and different shading scenarios, including inhomogeneous illumination among solar cells and incomplete shading in one cell, which innovatively combines the same cells or divides one affected cell into many small single cells and then combines the same ones, and analyzes the shaded cell. The results indicate that the maximum power dissipation of the shaded cell occurs at short-circuit conditions. With the number of solar cells increasing, the shaded cell transfers from generating power to dissipating power and there is a maximum point of power dissipation in different shading situations that may lead to severe hot spot. Adding up the heat converted from solar energy, the heating power can be higher. In this case, some improvements about bypass diodes are proposed to reduce hot spot.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Bypass diode"

1

Shafi, Muhammad Irfan, and Md Maidur Rehman Talukder. "Development of Hybrid Solar System." Thesis, Högskolan i Gävle, Akademin för teknik och miljö, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-13927.

Full text
Abstract:
Technology replaces newer technology with improved efficiency. Solar technology is going to draw out a new life to make a green change in the terms of energy. As a result energy from the sunlight is being changed into electric energy by using solar cell. But still its efficiency could not be able to make a sense as a depending energy technology. In order to look up the solution, solar technology is changing rapidly to get maximum output. To take up this new challenge solar technology is trying to change its building component that are used to make solar cell, for example solar cell material, bypass diode system, blocking diode system etc.   Now-a-days, solar energy system is designed as a hybrid system that can make electricity and hot water at the same time. In the hybrid solar system, photovoltaic and solar thermal systems are integrated at the same system and as a result heat and electricity are produced simultaneously at the same area. Solar cells are attached with both top and the bottom side of the module and the collectors are set up inside the module. By using collector inside the module, rejected heat from the solar cell is absorbed by the water that flows through the collectors. But a problem arises at the midday or after midday because the reflector of this system cannot reflect sunlight properly on the bottom side of the module. That’s why shading is occurred on the bottom side which reduce the total electrical output of this system.   To work out this shading problem, a bypass diode is connected in parallel with the group of solar cells. Schottky diodes are being used as bypass diodes inside in the most of the solar cells. Schottky diode forward voltage drop is almost 0.45 Volt which is an important cause of reducing the output power as well as the efficiency of this hybrid system. To solve this problem, new lossless diode is attached inside the hybrid solar system instead of schottky diode which can work with a very low forward voltage drop roughly 50mV at 10amp.   To make a comparison between the performance of PVT system with the schottky diode and the new lossless diode, many data has been collected from the outdoor test. After getting the output result, it is clear that the output power and efficiency is going to be changed for using the new lossless diode. For using the lossless diode, the efficiency of the bottom side of the module was increased by 0.31 %.
APA, Harvard, Vancouver, ISO, and other styles
2

Chocholáč, Jan. "Využití bypassových diod ve fotovoltaických panelech." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218888.

Full text
Abstract:
This thesis deals with usage of bypass diodes in photovoltaic panels. Familiarize us with principles of photovoltaic modules and functions, their electrical characteristics and features. The central objective of this work is description of influence of bypass diodes on particularly shading photovoltaic panels and its volt-ampere characteristics. By the help of created software in Agilent VEE 8.0 simulate the shading panel and compare with real measurement.
APA, Harvard, Vancouver, ISO, and other styles
3

Gallardo, Saavedra Sara. "Analysis and simulation of shading effects on photovoltaic cells." Thesis, Högskolan i Gävle, Avdelningen för bygg- energi- och miljöteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-21725.

Full text
Abstract:
The usage of conventional energy applications generates disproportionate emissions of greenhouse gases and the consumption of part of the energy resources available in the world. It has become an important problem which has serious effects on the climatic change. Therefore, it is crucial to reduce these emissions as much as possible. To be able to achieve this, renewable energy technologies must be used instead of conventional energy applications. Solar Photovoltaic (PV) technologies do not release greenhouse gas emissions directly and can save more than 30 million tonnes of carbon per exajoule of electricity generated relative to a natural gas turbine running at 45% efficiency. Shadowing is one of the most important aspects that affects the performance of PV systems. Consequently, many investigations through this topic are being done in order to develop new technologies which mitigate the impact of shadowing during PV production. In order to minimise the impact of shadowing it is desired to be able to predict the performance of a system with PV-modules during shadowing. In this thesis a simulation program for calculating the IV-curve for series connected PV-modules during partial shadowing has been developed and experimentally validated. PV systems modelling and simulation in LTspice environment has been presented and validated by means of a comparative analysis with the experimental results obtained in a set of tests performed in the laboratory of Gävle University. Experimental measurements were carried out in two groups. The first group corresponds with the experiments done in the string of six modules with bypass diodes while the measurements of the second group have been performed on a single PV module at HIG University. The simulation results of both groups demonstrated a remarkable agreement with the experimental data, which means that the model designed at LTspice supposes a very useful tool that can be used to study the performance of PV systems. This tool contributes to the investigations in this topic and it aims to benefit future installations providing a better knowledge of the shading problem. The master’s thesis shows an in-depth description of the required method to design a PV cell, a PV module and a PV array using LTspice IV and the input parameters as well as the needed tests to adjust the models. Moreover, it has been carried out a pedagogical study describing the effect that different shadow configurations have in the performance of solar cells. This study facilitates the understanding of the performance of PV modules under different shadowing effects. Lastly, it has also been discussed the benefits of installing some newer technologies, like DC-DC optimizers or module inverters, to mitigate the shadowing effects. The main conclusion about this topic has been that although most of the times the output power will be increased with the use of optimizers sometimes the optimizer does not present any benefits.
APA, Harvard, Vancouver, ISO, and other styles
4

Nylund, Sophie, and Zahra Barbari. "Study of defects in PV modules : UV fluorescence and Thermographic photography for Photovoltaics (PV) Field Application." Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-44120.

Full text
Abstract:
For a PV plant it is of fundamental importance that the operation of the PV modules is free from faults or at least that the faults can be detected early, to ensure efficient electricity production. Some defects such as cracks can be seen in visible light while microcracks and damage to the silicon material can only be seen through special lighting. This study focuses on the most common defects in photovoltaic (PV) systems. Compare the infrared (IR) technology with the new ultraviolet (UV) fluorescence image technique for PV characterization, based on their accuracy and uncertainty factors under an experimental field investigation. In this study, first a literature study was conducted to the most common defects in PV system and their impact on electricity generation. Then a simulation model of a PV system was created in PVsyst and exported to Microsoft Excel which was used to evaluate how different defects at different stages of the PV cell's life cycle impact electricity generation, performance parameters and economic exchange. Furthermore, experiments with UV and IR was implemented at a PV system located in Dalarna and some PV modules at MDH. It was conducted that occurrence of snail tracks, delamination and hot spots in combination with bypass failures and non-functioning cell will affect the economic profitability in the long run and the payback time will increase since their impacts on electricity generation and performance parameters are huge. The worst case is when PV modules are affected by the fault in bypass diode and non-functioning cell which result to a payback time longer than the module's lifetime and huge amount electricity losses in different bypass diodes configurations. Since UV and IR are two different methods that are performed in two different ways, different errors occurred during the measurements. The biggest external factor was the weather that determined if the experiment could be implemented. The IR method gave decent results and was quicker to use, but the UV method highlighted some defect which could not be seen with the IR technology.
APA, Harvard, Vancouver, ISO, and other styles
5

Dus, Ondřej. "Vliv zastínění na parametry solárních modulů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217647.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Singh, Priyanka O. "Modeling of Photovoltaic Arrays under Shading Patterns with Reconfigurable Switching and Bypass Diodes." University of Toledo / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1321559036.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nicolini, Andrea. "Simulazioni di moduli fotovoltaici ad elevate prestazioni." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amslaurea.unibo.it/12220/.

Full text
Abstract:
Il lavoro è basato sullo studio teorico e su simulazioni SPICE di due diverse tipologie di modulo fotovoltaico ad elevate prestazioni. In particolare, viene analizzata in dettaglio una possibile metodologia innovativa di interconnessione di celle solari in modulo. Questo approccio, chiamato nel presente elaborato “approccio Sliced-cells”, viene confrontato con una tipologia di modulo standard comunemente installata e ben conosciuta in tutte le particolarità. L’obiettivo è di studiare le differenze tra i due approcci in termini di performance elettriche e tipologia di interconnessione. Per entrambi gli approcci è analizzato in dettaglio il fattore Cell-To-Module losses (CTM), ovvero i meccanismi ottici e resistivi che devono essere considerati nel momento in cui si passa dal singolo elemento alla struttura modulare, completa dello stack incapsulante. Viene inoltre analizzato il comportamento dei due moduli in condizioni di ombreggiamento, considerando l’inserimento nella struttura di diodi di bypass ed ipotizzando due diverse configurazioni di connessione. Come detto, mi sono servito di simulazioni in ambiente SPICE, mediante le quali è stato possibile simulare l’interconnessione di più parti a livello elettrico per ricreare una situazione realistica di moduli fotovoltaici realizzati mediante i due approcci studiati. Le analisi sono state effettuate a diverse condizioni di illuminazione, dopo una calibrazione dei modelli utilizzati. L’elaborato consta dunque di una parte introduttiva dove vengono riportati i principi alla base dell’effetto fotovoltaico e la descrizione generale di cella e modulo standard, a cui segue la vera e propria spiegazione dell’approccio Sliced-cells. Infine, vengono analizzati i modelli implementati e le simulazioni effettuate, riportando e commentando i risultati ottenuti.
APA, Harvard, Vancouver, ISO, and other styles
8

Fu, Jing-Yan, and 傅敬嚴. "A Study on Different Bypass Diode Configurations for Enhencing the Performance of Solar Arrays." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/5676d4.

Full text
Abstract:
碩士
國立高雄應用科技大學
電機工程系博碩士班
106
A solar power generation system is prone to be affected by shadowing. As long as one solar cell on the whole solar array is shaded, the solar array output power will drop drastically, so bypass diodes are usually used to overcome the shading problem and improve the array performance.The number of bypass diodes installed and the connection configuration will indirectly affect the output characteristics of the solar array. Due to the increase in the number of bypass diodes, the loss becomes larger, turning a good solution contributed bypass diode to a scheme secondary power loss of the solar power system. Therefore, the number and connection method of the bypass diodes need to be studied. Through this paper, It can be found that the crossover bypass diode configuration can effectively achieve a balance between cost and benefit.
APA, Harvard, Vancouver, ISO, and other styles
9

Huang, Chun-Chieh, and 黃俊傑. "A Study on Heat Transfer of Air-conditioning System Bypass Cooling Multi-chip Light Emitting Diode." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/85744198768178931422.

Full text
Abstract:
碩士
國立勤益科技大學
冷凍空調系
101
This paper focus on the indium gallium nitride (InGaN) multi-chip for high power LED heat transfer and thermal cooling analysis. This research method based on multi-chip LED experimental study of aluminum extrusion heat sink and air-conditioning system forced cooling approach. An investigation of the heat transfer characteristics of the phenomenon of variation in order to improve performance and to help LED system as reference guideline for thermal design and assembly. This study package structure can use the silicon substrate material and fill the copper material increase thermal conduction, and use the air-conditioning system cooling approach. It will enhance to increase LED thermal cooling, long life, reliability, and reduce optics lumen decay phenomenon and etc. Finally, there are results according to different power rating to re-define the LED classifications.
APA, Harvard, Vancouver, ISO, and other styles
10

TUNG, HSU-CHIEH, and 董旭傑. "A Study on Solar Array Characteristics under Different Degrees of Shading and Different Blocking and Bypass Diode Configurations." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/298dva.

Full text
Abstract:
碩士
國立高雄科技大學
電機工程系
107
Shading is a major factor impacting the power output of solar power systems. To counter this issue, bypass diodes are often installed to solar cells, while in the case of solar cells failing to generate power or itself becoming electrical loads due to uneven distribution of current in each array because solar cells are shaded, blocking diodes are often installed to prevent such a problem, and the configuration of bypass and blocking diodes can reduce the negative effect of shading. Previous studies have found that output characteristics are impacted by the number of installed bypass diodes, the way protecting areas overlap, back current of blocking diodes, and the number of solar cells in series. This study aimed to measure and discuss the impact of blocking diode and bypass diode on the power output in various degrees of shading.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Bypass diode"

1

Yadav, Anurag Singh, Vinod Kumar Yadav, V. Mukherjee, and Santosh Ghosh. "Performance Investigation of Different Bypass Diode Topology Based SDK-PV Arrays Under Partial Shading Conditions." In Lecture Notes in Electrical Engineering, 261–70. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4692-1_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fernandez, E., and Sandhya Prajapati. "Impact of the Positioning of a Single Bypass Diode in a PV String on its Reliability." In Lecture Notes in Electrical Engineering, 1117–28. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6772-4_97.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zebiri, Mohamed, Mohamed Mediouni, and Hicham Idadoub. "The Behavior of a Photovoltaic Module Under Shading, in the Presence of a Faulty Bypass Diode." In Advances in Intelligent Systems and Computing, 71–80. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12065-8_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Danwen, Bao, Gu Zhiyan, Zhang Jingbing, and Shao Shuji. "A Solar Cell Module with Internal Independent Bypass Diodes." In Proceedings of ISES World Congress 2007 (Vol. I – Vol. V), 1514–16. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-75997-3_307.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yu, Ting-Chung, Yao Ti Hung, Yih-Bin Lin, Chih-Hao Chen, and Yan-Cheng Liou. "Optimal Configuration of Bypass Diodes for a High-Concentration Photovoltaic System." In Lecture Notes in Electrical Engineering, 845–56. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-48768-6_94.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hamada, Toshiyuki, Kenta Nakamoto, Ikuo Nanno, Norio Ishikura, Shinichiro Oke, and Masayuki Fujii. "Characteristics of Failed Bypass Diodes for Photovoltaic Module by Artificial and Natural Lightning." In Lecture Notes in Electrical Engineering, 1218–24. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31676-1_113.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ibrahim, Haider, and Nader Anani. "Study of the Effect of Different Configurations of Bypass Diodes on the Performance of a PV String." In Sustainability in Energy and Buildings, 593–600. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9868-2_50.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mahto, Rakeshkumar, and Reshma John. "Modeling of Photovoltaic Module." In Solar Cells [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.97082.

Full text
Abstract:
A Photovoltaic (PV) cell is a device that converts sunlight or incident light into direct current (DC) based electricity. Among other forms of renewable energy, PV-based power sources are considered a cleaner form of energy generation. Due to lower prices and increased efficiency, they have become much more popular than any other renewable energy source. In a PV module, PV cells are connected in a series and parallel configuration, depending on the voltage and current rating, respectively. Hence, PV modules tend to have a fixed topology. However, in the case of partial shading, mismatching or failure of a single PV cell can lead to many anomalies in a PV module’s functioning. If proper attention is not given, it can lead to the forward biasing of healthy PV cells in the module, causing them to consume the electricity instead of producing it, hence reducing the PV module’s overall efficiency. Hence, to further the PV module research, it is essential to have an approximate way to model them. Doing so allows for understanding the design’s pros and cons before deploying the PV module-based power system in the field. In the last decade, many mathematical models for PV cell simulation and modeling techniques have been proposed. The most popular among all the techniques are diode based PV modeling. In this book chapter, the author will present a double diode based PV cell modeling. Later, the PV module modeling will be presented using these techniques that incorporate mismatch, partial shading, and open/short fault. The partial shading and mismatch are reduced by incorporating a bypass diode along with a group of four PV cells. The mathematical model for showing the effectiveness of bypass diode with PV cells in reducing partial shading effect will also be presented. Additionally, in recent times besides fixed topology of series–parallel, Total Cross-Tied (TCT), Bridge Link (BL), and Honey-Comb (H-C) have shown a better capability in dealing with partial shading and mismatch. The book chapter will also cover PV module modeling using TCT, BL, and H-C in detail.
APA, Harvard, Vancouver, ISO, and other styles
9

Wambach, K. "Development of a High Current and High Power Terminal System with Bypass Diodes for Large Area Modules Integrated Into Buildings." In Sixteenth European Photovoltaic Solar Energy Conference, 2156–59. Routledge, 2020. http://dx.doi.org/10.4324/9781315074405-24.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Bypass diode"

1

Hamada, Toshiyuki, Kenta Nakamoto, Ikuo Nanno, Masayuki Fujii, Shinichiro Oke, and Norio Ishikura. "Characteristics of Failure Schottky Barrier Diode and PN Junction Diode for Bypass Diode using Induced Lightning Serge Test." In 2018 7th International Conference on Renewable Energy Research and Applications (ICRERA). IEEE, 2018. http://dx.doi.org/10.1109/icrera.2018.8567008.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Duong, Minh Quan, Gabriela Nicoleta Sava, Gabriela Ionescu, Horia Necula, Sonia Leva, and Marco Mussetta. "Optimal bypass diode configuration for PV arrays under shading influence." In 2017 IEEE International Conference on Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe). IEEE, 2017. http://dx.doi.org/10.1109/eeeic.2017.7977526.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hamada, Toshiyuki, Kenta Nakamoto, Ikuo Nanno, Norio Ishikura, Shinichiro Oke, and Masayuki Fujii. "Fault Characteristics of Schottky Barrier Diode used as Bypass Diode in Photovoltaic Module against Repetitive Surges." In 2020 IEEE 47th Photovoltaic Specialists Conference (PVSC). IEEE, 2020. http://dx.doi.org/10.1109/pvsc45281.2020.9301020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Clevenger, Brad, Lawson Hise, Fred Newman, Dan Aiken, and Paul Sharps. "Evaluation of ESD Susceptibility of Solar Cells with a Monolithic Bypass Diode." In 2006 IEEE 4th World Conference on Photovoltaic Energy Conference. IEEE, 2006. http://dx.doi.org/10.1109/wcpec.2006.279875.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yoshioka, H., S. Nishikawa, S. Nakajima, M. Asai, S. Takeoka, T. Matsutani, and A. Suzuki. "Non hot-spot PV module using solar cells with bypass diode function." In Conference Record of the Twenty Fifth IEEE Photovoltaic Specialists Conference - 1996. IEEE, 1996. http://dx.doi.org/10.1109/pvsc.1996.564364.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Duong, Minh Quan, Kim Hung Le, Thi Sen Dinh, Marco Mussetta, and Gabriela Nicoleta Sava. "Effects of bypass diode configurations on solar photovoltaic modules suffering from shading phenomenon." In 2017 10th International Symposium on Advanced Topics in Electrical Engineering (ATEE). IEEE, 2017. http://dx.doi.org/10.1109/atee.2017.7905024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bhoopathy, Raghavi, Oliver Kunz, Mattias Juhl, Thorsten Trupke, and Ziv Hameiri. "Inspecting series resistance effects and bypass diode failure using contactless outdoor photoluminescence imaging." In 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC) (A Joint Conference of 45th IEEE PVSC, 28th PVSEC & 34th EU PVSEC). IEEE, 2018. http://dx.doi.org/10.1109/pvsc.2018.8547301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fujimoto, Yudai, Kenta Nakamoto, Ikuo Nanno, Toshiyuki Hamada, Norio Ishikura, Shinichiro Oke, Masayuki Fujii, and Takashi Oozeki. "Influence of an Impulse Current near a Photovoltaic Solar Module on Bypass Diode Characteristics." In 2019 8th International Conference on Renewable Energy Research and Applications (ICRERA). IEEE, 2019. http://dx.doi.org/10.1109/icrera47325.2019.8996523.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gade, Vivek, Narendra Shiradkar, Paul Robusto, Kent Whitfield, John Wohlgemuth, Yasunori Uchida, and Neelkanth G. Dhere. "Research, test, and development activities performed by junction box bypass diode task force # 4." In SPIE Solar Energy + Technology, edited by Neelkanth G. Dhere, John H. Wohlgemuth, and Rebecca Jones-Albertus. SPIE, 2014. http://dx.doi.org/10.1117/12.2062195.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ziar, H., S. Mansourpour, E. Afjei, and M. Kazemi. "Bypass diode characteristic effect on the behavior of solar PV array at shadow condition." In 2012 3rd Power Electronics, Drive Systems & Technologies Conference (PEDSTC). IEEE, 2012. http://dx.doi.org/10.1109/pedstc.2012.6183331.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Bypass diode"

1

Bower, Ward Isaac, Michael A. Quintana, and Jay Johnson. Electrical and thermal finite element modeling of arc faults in photovoltaic bypass diodes. Office of Scientific and Technical Information (OSTI), January 2012. http://dx.doi.org/10.2172/1035329.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Bypass diode' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography