Log in

Relevant bibliographies by topics / C-130 / Journal articles

To see the other types of publications on this topic, follow the link: C-130.

Journal articles on the topic 'C-130'

Author: Grafiati

Published: 4 June 2021

Last updated: 6 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'C-130.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Minnetyan, Levon, Frank Abdi, Christos C. Chamis, and Dade Huang. "Computational adaptive structure assessment of c-130 flaperon." Procedia Engineering 1, no. 1 (2009): 47–50. http://dx.doi.org/10.1016/j.proeng.2009.06.013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hancock, Darrell O., and Robert E. Synovec. "Early Detection of C-130 Aircraft Engine Malfunction by Principal Component Analysis of the Wear Metals in C-130 Engine Oil." Applied Spectroscopy 43, no. 2 (1989): 202–8. http://dx.doi.org/10.1366/0003702894203075.

Full text

Abstract:

Spectrophotometry analysis of engine oil for wear metal to detect engine malfunctions and failing engine components is the basis of the United States Air Force Spectrophotometric Oil Analysis Program (SOAP). This program was abandoned for C-130 transport aircraft because of difficulties in correlating the atomic emission spectroscopy data with engine problems. Principal component analysis (PCA), a factor analysis method, reveals information and structure not previously apparent in the C-130 oil analysis data. These results suggest that the C-130 SOAP program could be made viable with the significant advantages obtained through incorporation of PCA.

APA, Harvard, Vancouver, ISO, and other styles

3

Yang, Xue Liang, Xiang Yun Deng, Li Ren Han, et al. "Preparation and Ferroelectric Properties of Sol-Gel Derived (Ba_0.95Ca_0.05)TiO₃ Ceramics." Advanced Materials Research 418-420 (December 2011): 362–67. http://dx.doi.org/10.4028/www.scientific.net/amr.418-420.362.

Full text

Abstract:

Ba0.95Ca0.05)TiO3 (BCT) ferroelectric ceramics were prepared from powders synthesized using a sol–gel process. Structural evolution of the BCT dry gels are investigated by thermal gravimetric analysis differential scanning calorimetry. It is found that BCT crystallites can be formed before 800°C. Well-sintered samples are synthesized at 1320°C for 2h. The crystal structure of the BCT ceramics is studied by XRD and ferroelectric properties of the ceramics are characterized by TF analyzer 2000. The Curie temperature Tc of the BCT ceramics is at about 130°C. The maximum dielectric constant (εr) reaches about 13678 at 130°C and hysteresis loops are measured with the temperature range from 25°C to 150°C.

APA, Harvard, Vancouver, ISO, and other styles

4

Antranikian, G., A. Rüdiger, F. Canganella, M. Klingeberg, and A. Sunna. "Biodegradation of Polymers at Temperatures up to 130°C." Journal of Macromolecular Science, Part A 32, no. 4 (1995): 661–69. http://dx.doi.org/10.1080/10601329508010279.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Osīte, Agnese, Kārlis Agris Gross, Arturs Viksna, and Raimons Poplausks. "Hydrothermally Synthesized Strontium Peroxyapatite." Advanced Materials Research 1117 (July 2015): 209–12. http://dx.doi.org/10.4028/www.scientific.net/amr.1117.209.

Full text

Abstract:

The current research focuses on peroxide ion incorporation in the structure of strontium hydroxyapatite (SrHAp) by exposure to H2O2 ina closed hydrothermal vessel under mild conditions at 130 to 170 °C. Peroxide enriched strontium apatite (SrPerAp) was characterized for structure by X-Ray diffraction, for peroxide content- by permanganometric titration and then viewed by SEM. This study continued from previous work that used 30%H2O2 and showed a higher included peroxide content after processing with 50% H2O2 at 130 °C 70% of the theoretical peroxide content in apatitic channels of strontium apatite. This is the highest peroxide content incorporated to date and employs a lower temperature than heating at 1300 °C.

APA, Harvard, Vancouver, ISO, and other styles

6

Yue, Shi, Wang Jing, Wang Yubin, et al. "Inlet temperature affects spray drying quality of watermelon powder." Czech Journal of Food Sciences 36, No. 4 (2018): 316–23. http://dx.doi.org/10.17221/406/2017-cjfs.

Full text

Abstract:

The effect of the inlet temperature on the quality of watermelon powder after spray drying was evaluated. Inlet temperatures of the drying air of 120, 130, 140, and 150°C maintained water solubility of the watermelon powder at 96%. At 253 µM/g, the ORAC value of the watermelon powder dried at 130°C was the highest among all tested powders. The D<sub>50</sub> of the watermelon powder dried at 130°C was 18.21 ± 0.22 µm with a span of 1.73 ± 0.038, which was more uniform than that of other powders. The crystallinity of the powder dried at 130°C was higher than that dried at both 120 and 150°C and showed stronger thermal stability. Moreover, watermelon powder dried at 130°C presented a similar aroma as the fresh watermelon juice when being solved. Hence, an inlet temperature of the drying air of 130°C was the optimal temperature for the production of watermelon powder.

APA, Harvard, Vancouver, ISO, and other styles

7

AMABLE, LAUREN, ELAINE GAVIN, KENJI KUDO, et al. "GLI1 upregulates C-JUN through a specific 130-kDa isoform." International Journal of Oncology 44, no. 3 (2013): 655–61. http://dx.doi.org/10.3892/ijo.2013.2222.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Yang, Yuxi, Wenting Xu, Xijun Xu, et al. "The enhanced photocurrent of epitaxial BiFeO3 film at 130 °C." Journal of Applied Physics 119, no. 4 (2016): 044102. http://dx.doi.org/10.1063/1.4940411.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Banaszak, David, Dansen Brown, and David Laird. "Antonomous Environmental Definition of C-130 Flap Well Skin Panel." Journal of the IEST 48, no. 1 (2005): 50–61. http://dx.doi.org/10.17764/jiet.48.1.pw070l022uu28503.

Full text

Abstract:

Air Force C-130 aircraft require numerous aluminum doubler repairs on the wing flap skin aft of the right-hand outboard engine. These repairs are costly and require riveting. Rivets often provide new areas of stress concentration, which causes new cracks to develop elsewhere. Boeing and the Air Force Research Laboratory (AFRL) are measuring the thermal and strain environment behind the right-hand outboard engine of a North Carolina Air National Guard (NCANG) operational C-130 aircraft (TN 93-1456) for use in design of a damped repair patch to prevent the growth of cracks in skin under the wing flap panel. During June 2003. AFRL engineers and technicians acquired data using an autonomous damage dosimeter during five operational C-130 flights. The damage dosimeter measures structural strains and temperatures on in-service aircraft to diagnose structural conditions that are difficult to analyze, such as acoustics and high cycle fatigue (HCF). The first flight was from Charlotte, North Carolina to Warner Robins Air Force Base (AFB), Georgia and returned to Charlotte. The last four flights were assault flights where the C-130 simulated cargo drops. Pilots logged the altitude and indicated airspeed, engine speed, and flap positions for the first four flights. Flap position settings were compared with dosimeter temperature and root mean square (rms) strain measurements. This paper presents typical third octave plots showing engine speed vibratory frequencies, rms time histories (TH), and correlation data for a flight. This paper also presents typical limited data in TH, probability density function (PDF), power spectral density (PSD), and rain flow formats.

APA, Harvard, Vancouver, ISO, and other styles

10

Frank, Walter, and Birgit Bertsch-Frank. "Carosche Säure: Molekülstruktur und Assoziation im Festkörper bei − 130 °C." Angewandte Chemie 104, no. 4 (1992): 469–71. http://dx.doi.org/10.1002/ange.19921040424.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Kubler, Hans, Yi-Ren Wang, and David Barkalow. "Generation of Heat in Wood Between 80 and 130 °C." Holzforschung 39, no. 2 (1985): 85–89. http://dx.doi.org/10.1515/hfsg.1985.39.2.85.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Swartz, Stephen M., and Daniel D. Mattioda. "Critical Chain Project Scheduling for C-130 Aircraft Isochronal Inspection." Military Operations Research 10, no. 2 (2005): 39–50. http://dx.doi.org/10.5711/morj.10.2.39.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

LUDERER-GMACH, Marion, Hans-Dieter LIEBIG, Wolfgang SOMMERGRUBER, et al. "Human rhinovirus 2A proteinase mutant and its second-site revertants." Biochemical Journal 318, no. 1 (1996): 213–18. http://dx.doi.org/10.1042/bj3180213.

Full text

Abstract:

The 2A proteinases of human rhinoviruses are cysteine proteinases with marked similarities to serine proteinases. In the absence of a three-dimensional structure, we developed a genetical screening system for proteolytic activity and identified Phe-130 as a key residue. The mutation Phe-130 → Tyr almost completely inhibited enzyme activity at 37 °C; activity was, however, partially restored by the following exchanges: Ser-27 → Pro, His-135 → Arg or His-137 → Arg. To investigate this phenotypic reversion, 2A proteinases with the mutations Phe-130 → Tyr, Phe-130 → Tyr/His-135 → Arg, Phe-130 → Tyr/His-137 → Arg, His-135 → Arg or His-137 → Arg were expressed in Escherichia coli and purified. None of these mutations affected the affinity of the enzyme for a peptide substrate. However, the temperature-dependence of enzyme activity, as assayed by cleavage of a peptide substrate and by monitoring the toxicity of the proteinases towards the E. coli strain BL21(DE3), and the structural stability, as monitored by 8-anilino-1-naphthalenesulphonic acid fluorescence and CD spectrometry, were affected. The thermal transition temperatures for both the activity and the stability of the Phe-130 → Tyr 2A proteinase were reduced by about 17 °C compared with the wild-type enzyme. The presence of the additional mutations His-135 → Arg or His-137 → Arg in the Phe-130 → Tyr mutant increased temperature stability by 3 °C and 6 °C respectively. Thus essential interactions exist within the C-terminal domain of human rhinoviral 2A proteinases which contribute to the overall stability and integrity of the enzyme.

APA, Harvard, Vancouver, ISO, and other styles

14

Lin, Chiung-Wei, Shih-Hao Yang, and Cheng-Yen Li. "Ionic nucleated crystallized silicon thin-film transistor fabricated at 130°C." Thin Solid Films 544 (October 2013): 457–60. http://dx.doi.org/10.1016/j.tsf.2013.02.081.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Kersey, Rossio K., Thomas M. Brodigan, Tetsunari Fukushige, and Michael W. Krause. "Regulation of UNC-130/FOXD-mediated mesodermal patterning in C. elegans." Developmental Biology 416, no. 2 (2016): 300–311. http://dx.doi.org/10.1016/j.ydbio.2016.06.029.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

NG, EDDIE YIN KWEE, SAMUEL KHENG HONG PANG, and WEN SHAN CHIU. "COMPUTATIONAL AERODYNAMICS OF THE C-130 PREDICTING AIRFLOW EFFECT ON AIRDROP." International Journal of Computational Methods 10, no. 05 (2013): 1350025. http://dx.doi.org/10.1142/s0219876213500254.

Full text

Abstract:

This paper presents a delayed detached-eddy simulation-shear stress transport (DDES-SST) analysis of the airflow in the opened cargo hatch region of the C-130H. Numerical simulations are performed on a full-scaled axisymmetric aircraft model with the standard airdrop method settings at a 5° angle of attack. Results show a large vortex core forming at the mouth of the cargo bay and diminishing in strength and vorticity with distance from the cargo ramp. An approximate safe distance for deployment of extraction parachutes is also measured with the help of streamline plots.

APA, Harvard, Vancouver, ISO, and other styles

17

Karamanou, M., G. Tsoucalas, G. Skarpas, and G. Androutsos. "La description magistrale de la pleurésie par Galien (130–c.201)." Revue de Pneumologie Clinique 68, no. 6 (2012): 381. http://dx.doi.org/10.1016/j.pneumo.2012.10.003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Ma, Shuhua, Shili Zheng, Yifei Zhang, and Yi Zhang. "Phase Diagram for the Na2O−Al2O3−H2O System at 130 °C." Journal of Chemical & Engineering Data 52, no. 1 (2007): 77–79. http://dx.doi.org/10.1021/je060244k.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Vavilin, Dmitrii V., and Jean-Marc Ducruet. "The Origin of115–130°C Thermoluminescence Bands in Chlorophyll-Containing Material." Photochemistry and Photobiology 68, no. 2 (1998): 191–98. http://dx.doi.org/10.1111/j.1751-1097.1998.tb02488.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Chen, Chang-Jen, and Chun-Yuan Chu. "TCTAP C-130 A Nightmare of Coronary Perforation with Cardiac Tamponade." Journal of the American College of Cardiology 73, no. 15 (2019): S194—S195. http://dx.doi.org/10.1016/j.jacc.2019.03.323.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Voigt, Martin, Chiara Marieni, Andre Baldermann, et al. "An experimental study of basalt–seawater–CO2 interaction at 130 °C." Geochimica et Cosmochimica Acta 308 (September 2021): 21–41. http://dx.doi.org/10.1016/j.gca.2021.05.056.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Zhao, Jun, Hai Bo Yang, Shu Ping Gong, and Dong Xiang Zhou. "Fabrication of Lead-Free and High T_c Positive Temperature Coefficient of Resistivity Ceramics Sintered in Air." Advanced Materials Research 415-417 (December 2011): 1005–8. http://dx.doi.org/10.4028/www.scientific.net/amr.415-417.1005.

Full text

Abstract:

As a lead-free positive temperature coefficient of resistivity (PTCR) material, [Ba0.95-x (K0.5Bi0.5)0.05Cax]1-yNbyO3 system was prepared by the conventional solid-state reaction method. All samples sintered in air at 1300°C possess PTC characteristics as well as semi-conductivity characteristics, especially they show high Tc(130°C~160°C) value and the jump of the resistivity (maximum resistivity ρmax / minimum resistivity ρmin ) is four orders of magnitude. Samples with the composition of 0.3mol% Nb5+ have low room-temperature resistivity (ρ25°C) of ~103Ω.cm.

APA, Harvard, Vancouver, ISO, and other styles

23

Demharter, Anton. "Polyurethane rigid foam, a proven thermal insulating material for applications between +130°C and −196°C." Cryogenics 38, no. 1 (1998): 113–17. http://dx.doi.org/10.1016/s0011-2275(97)00120-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

NAL, N., A. E. MANGUOGLU, C. F. SARGIN, et al. "Two rare mutations in Turkey: IVS I.130(G-C) and IVS II.848(C-A)." Clinical and Laboratory Haematology 27, no. 4 (2005): 274–77. http://dx.doi.org/10.1111/j.1365-2257.2005.00691.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Szreder, Mariusz. "Economical and technical aspects of using air heat pumps for hot water." E3S Web of Conferences 46 (2018): 00014. http://dx.doi.org/10.1051/e3sconf/20184600014.

Full text

Abstract:

The paper presents selected technical and economic aspects related to the use of air heat pumps for the preparation of domestic hot water DHW. The research shows that heating the water in the 130 dm3 storage tank with the A21/W30-50 profile lasted an average of 130 minutes, and the heat pump consumed about 2.2 kWh of energy per one heating cycle. Heating water in a 130 dm3 storage tank from 25°C to 40°C lasted an average of 60 minutes, while heating water for another 5°C took 30 minutes. The operation of the heat pump in the higher temperature of the water in the storage tank is less effective, making the heating of water in the tank above 50°C is ineffective.

APA, Harvard, Vancouver, ISO, and other styles

26

YAMAMICHI, Ryo, Takaaki MANAKA, Dai TAGUCHI, and Mitsumasa IWAMOTO. "Mobility Control of TIPS-Pentacene Thin Films Prepared by Blade-Coating Method." IEICE Transactions on Electronics E100.C, no. 2 (2017): 130–32. http://dx.doi.org/10.1587/transele.e100.c.130.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

LE, Huy-Binh, Sang-Gug LEE, and Seung-Tak RYU. "A Single-Supply 84dB DR Audio-Band ADC for Compact Digital Microphones." IEICE Transactions on Electronics E95-C, no. 1 (2012): 130–36. http://dx.doi.org/10.1587/transele.e95.c.130.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Pena, CE, JA Rodrigues, C. Ely, M. Giannini, and AF Reis. "Two-year Randomized Clinical Trial of Self-etching Adhesives and Selective Enamel Etching." Operative Dentistry 41, no. 3 (2016): 249–57. http://dx.doi.org/10.2341/15-130-c.

Full text

Abstract:

SUMMARY Objective: The aim of this randomized, controlled prospective clinical trial was to evaluate the clinical effectiveness of restoring noncarious cervical lesions with two self-etching adhesive systems applied with or without selective enamel etching. Methods: A one-step self-etching adhesive (Xeno V+) and a two-step self-etching system (Clearfil SE Bond) were used. The effectiveness of phosphoric acid selective etching of enamel margins was also evaluated. Fifty-six cavities were restored with each adhesive system and divided into two subgroups (n=28; etch and non-etch). All 112 cavities were restored with the nanohybrid composite Esthet.X HD. The clinical effectiveness of restorations was recorded in terms of retention, marginal integrity, marginal staining, caries recurrence, and postoperative sensitivity after 3, 6, 12, 18, and 24 months (modified United States Public Health Service). Results: The Friedman test detected significant differences only after 18 months for marginal staining in the groups Clearfil SE non-etch (p=0.009) and Xeno V+ etch (p=0.004). One restoration was lost during the trial (Xeno V+ etch; p&gt;0.05). Conclusions: Although an increase in marginal staining was recorded for groups Clearfil SE non-etch and Xeno V+ etch, the clinical effectiveness of restorations was considered acceptable for the single-step and two-step self-etching systems with or without selective enamel etching in this 24-month clinical trial.

APA, Harvard, Vancouver, ISO, and other styles

29

Wambier, LM, CC Gonzaga, ACR Chibinski, et al. "Efficacy of a Light-cured Tetracaine-based Anesthetic Gel for Rubber Dam Clamp Placement: A Triple-blind Randomized Clinical Trial." Operative Dentistry 45, no. 2 (2020): E57—E65. http://dx.doi.org/10.2341/18-130-c.

Full text

Abstract:

SUMMARY Objectives: To evaluate the efficacy of a new light-cured anesthetic gel for pain control in adults undergoing rubber dam isolation for the restorative treatment of noncarious cervical lesions (NCCLs). Methods and Materials: This study was a randomized, split-mouth, triple-blind, controlled trial. The sample comprised 50 adults with at least one pair of NCCLs located in the same arch but on opposite sides. Simple randomization defined the tooth to receive the light-cured tetracaine-based anesthetic gel or the placebo gel. After cotton roll isolation, the gels were applied in the gingival tissue around the tooth with the aid of the applicator tip of a syringe, left in place for 15 seconds, and light-cured for 15 seconds. Then, a #212 clamp was positioned on the tooth. If the patient reported pain, the clamp was removed, the patient filled out a pain intensity form (a 0-10 visual analog scale [VAS] and a 0-4 verbal rating scale [VRS]) and an injectable anesthetic was applied before rubber dam isolation for the restorative procedure. The absolute risk, intensity of pain, and need for rescue anesthesia were analyzed by the McNemar test and the Wilcoxon signed rank test (α=5%). Results: The odds ratio [OR] for pain (OR=3.5; 95% confidence interval [CI]=1.1 to 14.6; p=0.03) showed lower reports of pain for the light-cured anesthetic gel. One in five patients will benefit from placement of the light-cured anesthetic gel. On average, pain intensity was one VAS unit lower in those using the light-cured anesthetic gel than in those using the placebo gel. For the VRS, the pain intensity for the light-cured anesthetic gel was 0.4 units lower than the pain intensity for the placebo gel (95% CI=–0.9 to 0.07). The OR for rescue anesthesia was 2.5 (95% CI=0.7 to 10.9; p=0.18). Conclusions: The light-cured, tetracaine-based anesthetic gel reduced the absolute risk of pain by 20% in NCCLs.

APA, Harvard, Vancouver, ISO, and other styles

30

Shi, Jinshu, Sheldon Q. Shi, H. Michael Barnes, Mark Horstemeyer, Jinwu Wang, and El-Barbary M. Hassan. "Kenaf Bast Fibers—Part I: Hermetical Alkali Digestion." International Journal of Polymer Science 2011 (2011): 1–8. http://dx.doi.org/10.1155/2011/212047.

Full text

Abstract:

The objective of this study was to develop a hermetical alkali digestion process to obtain single cellulosic fibers from kenaf bast. Kenaf bast were hermetically digested into single fiber using a 5% sodium hydroxide solution for one hour at four different temperatures (80°C, 110°C, 130°C, and 160°C). The hermetical digestion process used in this study produced fibers with high cellulose content (84.2–92.3%) due to the removal of lignin and hemicelluloses. The surface hardness and elastic modulus of the fibers digested at 130°C and 160°C were improved significantly compared with those digested at 80°C. The tensile modulus and tensile strength of the individual fibers reduced as the digestion temperature increased from 110°C to 160°C. Micropores were generated in fiber cell wall when the fibers were digested at 130°C and 160°C. The studies on the composites that were made from polypropylene reinforced with the digested fibers indicated that the compatibility between the digested fibers and polypropylene matrix was poor.

APA, Harvard, Vancouver, ISO, and other styles

31

CALICIOGLU, MEHMET, NANCY G. FAITH, DENNIS R. BUEGE, and JOHN B. LUCHANSKY. "Viability of Escherichia coli O157:H7 in Fermented Semidry Low-Temperature-Cooked Beef Summer Sausage." Journal of Food Protection 60, no. 10 (1997): 1158–62. http://dx.doi.org/10.4315/0362-028x-60.10.1158.

Full text

Abstract:

The population of inoculated Escherichia coli O157:H7 was monitored during the manufacture and storage of a semidry beef summer sausage processed by fermentation and cooking at a low temperature by heating to an internal temperature of 130°F (54°C). The all-beef batter (11% fat and nonmeat ingredients) was inoculated with the commercial starter culture Pediococcus acidilactici HP (≥8.6 log CFU/g of batter) and a five-strain mixture of E. coli O157:H7 (≥7 log CFU/g) and then hand stuffed into 2.5-inch (64-mm) diameter fibrous casings. The sausages were fermented at an initial temperature of 85°F (29°C) to a final temperature of 105°F (41°C) over ca. 13 h at 80% relative humidity (RH) to pH 4.6 or pH 5.0. After fermentation to pH 4.6, the internal temperature of the chubs was raised to 130°F (54°C) instantaneous over 3.6 h at 60% RH. After fermentation to pH 5.0, the internal temperature of the chubs was raised to 130°F (54°C) over 3.6 h at 60% RH and the chubs were maintained under these conditions for 0, 30, or 60 min. he chubs were cold water showered for 15 min and then chilled at 39°F (4°C) for 6 h before being vacuum packaged and stored at 39°F (4°C) or 77°F (25°C) for 7 days. Regardless of the target pH, fermentation alone resulted in only a 1.39-log CFU/g decrease in pathogen numbers. However, fermentation to pH 4.6 and heating to an internal temperature of 130°F (54°C) instantaneous reduced counts of E. coli O157:H7 by ≥7.0 log units to below detection levels (&lt;10 CFU/g). Pathogen numbers remained below levels detectable by direct plating, but viable E. coli O157:H7 cells were recovered by enrichment of samples during sausage storage at either refrigeration or abuse temperatures. In contrast, fermentation to pH 5.0 and heating to an internal temperature of 130°F (54°C) instantaneous resulted in a 3.2-log-unit decrease in counts of E. coli O157:H7. No appreciable reductions in pathogen numbers were observed thereafter following storage at either 39°F (4°C) or 77°F (25°C) for 7 days. Fermentation to pH 5.0 and heating to an internal temperature of 130°F (54°C) instantaneous followed by holding for 30 or 60 min resulted in about a 5- or 7-log reduction, respectively, in pathogen numbers. For chubs held for 30 min at 130°F (54°C), pathogen numbers decreased to 2.02 and &lt;1.0 log CFU/g at 39°F (4°C) and 77°F (25°C), respectively, after 7 days; viable cells were only observed by enrichment after storage at 77°F (25°C). For chubs held for 60 min at 130°F (54°C), pathogen numbers remained below levels detectable by direct plating, but viable cells were recoverable by enrichment after 7 days at both storage temperatures. These data will be useful guidelines to manufacturers for developing processing conditions to further ensure the safety of this category of fermented sausages relative to food-borne pathogens such as serotype O157:H7 strains of E. coli.

APA, Harvard, Vancouver, ISO, and other styles

32

KARCZEWSKI, Mirosław, Filip POLAK, Leszek SZCZĘCH, and Jerzy WALENTYNOWICZ. "MODELLING OF LOADING COMMAND SYSTEM VEHICLES ON THE TRANSPORT AIRCRAFT C-130." Journal of Science of the Gen. Tadeusz Kosciuszko Military Academy of Land Forces 181, no. 3 (2016): 100–111. http://dx.doi.org/10.5604/17318157.1221841.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Vavilin, Dmitrii V., and Jean-Marc Ducruet. "The Origin of 115–130°C Thermoluminescence Bands in Chlorophyll-Containing Material." Photochemistry and Photobiology 68, no. 2 (1998): 191. http://dx.doi.org/10.1562/0031-8655(1998)068<0191:tootbi>2.3.co;2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Goel, Saurabh. "TCTAP C-130 Retrieval of Broken Diagnostic Coronary Catheter Using Angioplasty Balloon." Journal of the American College of Cardiology 67, no. 16 (2016): S250—S251. http://dx.doi.org/10.1016/j.jacc.2016.03.349.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Fouladvand, Farhat, Sashko Zhezhovski, and Dimitar Mizov. "TCTAP C-130 Retrieval of Stent Loss During LAD PTCA - Complication Consequences." Journal of the American College of Cardiology 69, no. 16 (2017): S218—S219. http://dx.doi.org/10.1016/j.jacc.2017.03.359.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

KANEMATSU, Takashi, Yoshio MISUMI, Yutaka WATANABE та ін. "A new inositol 1,4,5-trisphosphate binding protein similar to phospholipase C-δ1". Biochemical Journal 313, № 1 (1996): 319–25. http://dx.doi.org/10.1042/bj3130319.

Full text

Abstract:

We have reported that two inositol 1,4,5-trisphosphate binding proteins, with molecular masses of 85 and 130 kDa, were purified from rat brain; the former protein was found to be the ∆1-isoenzyme of phospholipase C (PLC-∆1) and the latter was an unidentified novel protein [Kanematsu, Takeya, Watanabe, Ozaki, Yoshida, Koga, Iwanaga and Hirata (1992) J. Biol. Chem. 267, 6518-6525]. Here we describe the isolation of the full-length cDNA for the 130 kDa Ins(1,4,5)P3 binding protein, which encodes 1096 amino acids. The predicted sequence of the 130 kDa protein had 38.2% homology to that of PLC-∆1. Three known domains of PLC-∆1 (pleckstrin homology and putative catalytic X and Y domains) were located at residues 110-222, 377-544 and 585-804 with 35.2%, 48.2% and 45.8% homologies respectively. However, the protein showed no PLC activity to phosphatidylinositol 4,5-bisphosphate and phosphatidylinositol. The 130 kDa protein expressed by transfection in COS-1 cells bound Ins(1,4,5)P3 in the same way as the molecule purified from brain. Thus the 130 kDa protein is a novel Ins(1,4,5)P3 binding protein homologous to PLC-∆1, but with no catalytic activity. The functional significance of the 130 kDa protein is discussed.

APA, Harvard, Vancouver, ISO, and other styles

37

Liu, Rui, Wein Duo Yang, and Hui Ju Chueng. "Preparation and Visible-Light Photocatalytic Activity of TiO₂ Nanotubes from a Hydrothermal Method." Advanced Materials Research 197-198 (February 2011): 786–89. http://dx.doi.org/10.4028/www.scientific.net/amr.197-198.786.

Full text

Abstract:

TiO2 nanotubes were synthesized using TiO2 powder as raw material from a hydrothermal method. It was observed that the sample prepared at 130°C and calcined at 450°C only anatase formed, but the sample calcined at 800°C, both anatase and rutile formed. The obtained TiO2 nanotubes prepared at a hydrothermal temperature of 130°C and calcined at 450°C have a greater surface area of 356.8m2/g. Moreover, the TiO2 nanotubes demonstrate the photocatalytic degradation of methylene blue solution effectively by exposing the nanotubes in aqueous solution under visible light.

APA, Harvard, Vancouver, ISO, and other styles

38

Hannan, Md Abdul, Papia Haque, S. M. Fijul Kabir, and Mohammed Mizanur Rahman. "Chemical-Free Scouring and Bleaching of Cotton Knit Fabric for Optimum Dyeing Performance." Clothing and Textiles Research Journal 37, no. 4 (2019): 265–80. http://dx.doi.org/10.1177/0887302x19853386.

Full text

Abstract:

The current work endeavored to avoid chemicals during scouring and bleaching of cotton knit fabric in order to introduce a green method. Single jersey single lacoste knit fabrics were treated in water at 105 °C, 120 °C, and 130 °C for 20, 40, and 60 min at reduced process stage. Fourier transform infrared data revealed the weakening and shifting of typical bands of wax and pectin-based cotton impurities in the region of 1,740–1,200 cm−1 for the pretreated samples at 130 °C for 20 min. Color difference (Color Measurement Committee ΔE) was found within the acceptable range for 1.5% and 1% dyed samples when treated at 105 °C for 20 min, while 0.5% dyed samples required 130 °C for 20 min to achieve the desired range. The ratings for color fastness to washing, perspiration, and rubbing were 4–5 for all the chemical-free pretreated samples. The proposed process yielded better strength and dimensional stability compared to the conventionally pretreated samples.

APA, Harvard, Vancouver, ISO, and other styles

39

Lee, Yi-Chen, Chih-Ying Lin, Cheng-I. Wei, Hung-Nan Tung, Kuohsun Chiu, and Yung-Hsiang Tsai. "Preliminary Evaluation of a Novel Microwave-Assisted Induction Heating (MAIH) System on White Shrimp Cooking." Foods 10, no. 3 (2021): 545. http://dx.doi.org/10.3390/foods10030545.

Full text

Abstract:

The microwave-assisted induction heating (MAIH) system provides comprehensive heating by combining microwave heating (with 1300 W of power and 2450 MHz of frequency) in the top part and induction heating (with 1800 W of power) in the bottom part. In this study, fresh white shrimps were placed in a sealed crystallized polyethylene terephthalate (CPET) container and heated in the MAIH system at two temperatures (130 and 90 °C) from 60 to 120 s. Afterwards, the shrimp samples were rapidly cooled, and the changes in the shrimp quality, including the appearance, cook loss, aerobic plate count (APC), color values, and texture, during the heating process were analyzed. The results demonstrate that longer heating times decrease the APC levels, but increase the cook loss, color values (lightness, redness, and whiteness), and texture (hardness, cohesiveness and chewiness) of the white shrimp samples. In particular, the white shrimp is fully cooked and gains a completely red appearance, along with no APC detected after heating in the MAIH system at 130 °C for at least 80 s or at 90 °C for at least 100 s. In summary, to achieve a good appearance, no APC detected, and low cook loss, the following heating conditions are recommended for cooking white shrimp in the MAIH system: heating at 130 °C for 80 s or at 90 °C for 100 s. This novel MAIH technology allows food to be heated and sterilized after being packed, thereby eliminating the post-pollution issue. To the best of the authors’ knowledge, this is the first study to evaluate the use of MAIH in the application of food processing.

APA, Harvard, Vancouver, ISO, and other styles

40

Poggiolini, Ilaria, Daniel Erskine, Nishant N. Vaikath та ін. "RT-QuIC Using C-Terminally Truncated α-Synuclein Forms Detects Differences in Seeding Propensity of Different Brain Regions from Synucleinopathies". Biomolecules 11, № 6 (2021): 820. http://dx.doi.org/10.3390/biom11060820.

Full text

Abstract:

Aggregated α-synuclein (αSyn) protein is a core pathological feature of Parkinson’s disease (PD) and dementia with Lewy bodies (DLB). Both PD and DLB demonstrate the presence of diverse intracellular α-synuclein (αSyn) species, including C-terminally truncated αSyn (C-αSyn), although it is unknown how C-αSyn species contribute to disease progression. Using recombinant C-αSyn and PD and DLB brain lysates as seeds in the real-time quaking-induced conversion (RT-QuIC) assay, we explored how C-αSyn may be involved in disease stratification. Comparing the seeding activity of aqueous-soluble fractions to detergent-soluble fractions, and using αSyn 1-130 as substrate for the RT-QuIC assay, the temporal cortex seeds differentiated PD and DLB from healthy controls. In contrast to the temporal cortex, where PD and DLB could not be distinguished, αSyn 1-130 seeded by the detergent-soluble fractions from the PD frontal cortex demonstrated greater seeding efficiency compared to the DLB frontal cortex. Moreover, proteinase K-resistant (PKres) fragments from the RT-QuIC end products using C-αSyn 1-130 or C-αSyn 1-115 were more obvious in the frontal cortex compared to the temporal cortex. Morphological examinations of RT-QuIC end products showed differences in the size of the fibrils between C-αSyn 1-130 and C-αSyn 1-115, in agreement with the RT-QuIC results. These data show that C-αSyn species can distinguish PD from DLB and suggest diversity in αSyn species across these synucleinopathies, which could play a role in disease progression.

APA, Harvard, Vancouver, ISO, and other styles

41

Lee, Yeon-Gwan, Jin-Hyuk Kim, and Chun-Gon Kim. "High Temperature Endurable Fiber Optic Accelerometer." Shock and Vibration 2014 (2014): 1–8. http://dx.doi.org/10.1155/2014/571017.

Full text

Abstract:

This paper presents a low frequency fiber optic accelerometer for application in high temperature environments of civil engineering structures. The reflection-based extrinsic fiber optic accelerometer developed in this study consists of a transmissive grating panel, reflective mirror, and two optical fiber collimators as the transceiver whose function can be maintained up to 130°C. The dynamic characteristics of the sensor probe were investigated and the correlation between the natural frequency of the sensor probe and temperature variation was described and discussed. Furthermore, high temperature simulation equipment was designed for the verification test setup of the developed accelerometer for high temperature. This study was limited to consideration of 130°C applied temperature to the proposed fiber optic accelerometer due to an operational temperature limitation of commercial optical fiber collimator. The sinusoidal low frequency accelerations measured from the developed fiber optic accelerometer at 130°C demonstrated good agreement with that of an MEMS accelerometer measured at room temperature. The developed fiber optic accelerometer can be used in frequency ranges below 5.1 Hz up to 130°C with a margin of error that is less than 10% and a high sensitivity of 0.18 (m/s2)/rad.

APA, Harvard, Vancouver, ISO, and other styles

42

Jedlińska, Aleksandra, Alicja Barańska, Dorota Witrowa-Rajchert, Ewa Ostrowska-Ligęza, and Katarzyna Samborska. "Dehumidified Air-Assisted Spray-Drying of Cloudy Beetroot Juice at Low Temperature." Applied Sciences 11, no. 14 (2021): 6578. http://dx.doi.org/10.3390/app11146578.

Full text

Abstract:

This paper discusses the physicochemical properties of powders obtained by spray drying of cloudy beetroot juice, using dehumidified air in variants with or without carriers. The inlet air temperature was 130 °C or 90 °C, and the addition of the carriers was at a ratio of juice to carrier solids of 3:2. In the obtained powders, the following physicochemical properties were determined: water content and water activity, apparent density, loose and tapped density, porosity, flowability, particle size and morphology, and the content and retention of betalains. It was possible to dry cloudy beetroot juice without the use of carriers at low temperatures (90 or 130 °C). The 100% beetroot powders were characterized by satisfactory physicochemical properties, often better than those with carriers (including lower hygroscopicity and higher color saturation and yield). A lower loss of betalains was found for the powders with the addition of carriers. The best process yields were obtained for the powder without carriers at 130 °C and 90 °C.

APA, Harvard, Vancouver, ISO, and other styles

43

Martin, J. E., T. J. Quinn, and B. Chu. "Further Measurements of Thermodynamic Temperature Using a Total Radiation Thermometer: the Range - 130°C to +60°C." Metrologia 25, no. 2 (1988): 107–12. http://dx.doi.org/10.1088/0026-1394/25/2/008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Bühler, Rolf E. "Geminate-ion kinetics with competing ion fragmentation in nonpolar liquids with halocarbons." Canadian Journal of Physics 68, no. 9 (1990): 918–24. http://dx.doi.org/10.1139/p90-129.

Full text

Abstract:

The semi-empirical rate law for geminate-ion recombination by van den Ende, Warman, and Hummel, which predicts a linear dependence of the ion concentration with t−0.6, is modified to include simultaneous ion fragmentation. The theory is applied to the kinetics, as observed by pulse radiolysis of liquid methylcyclohexane (MCH) solutions of N2O, CHCl3, or tert-butylchloride (t-BuCl) at low temperatures. In MCH saturated with N2O (−130 °C), the solvent cation (MCH+, λmax = 550 nm) moves about 400 times faster than prediced by diffusion. With the known conductivity data at room temperature, an activation energy of about 2.7 kJ/mol can be derived. The solvent cation MCH+ does not appear to fragment. With t-BuCl added to MCH (−134 °C), MCH+ (λmax = 550 nm) and t-BuCl− (λmax = 450 nm) are observed simultaneously. The initial kinetics corresponds to the parent ion (MCH+) recombination with t-BuCl−. Then the MCH+ fragmentation with k1(−134 °C) = 3 × 105 s−1 is observed, followed by the geminate recombination of some fragment cation with t-BuCl−. The fragment cation recombines 300 times slower than the parent cation. With CHCl3 added to MCH (−130 °C), the MCH+ absorption is hidden within the [Formula: see text] band (λmax = 470 nm); however, the fragmentation is detected from kinetic analysis to occur in about 2 × 106 s−1. The modified t−0.6 rate law appears to be a very useful tool to study simultaneous ion recombination and ion fragmentation.

APA, Harvard, Vancouver, ISO, and other styles

45

Azad, Md, Won Kim, Cheng Jin, Wie Kang, Cheol Park, and Dong Cho. "Development of a Polymer-Mediated Soybean Nanocomposite by Hot Melt Extrusion to Improve Its Functionality and Antioxidant Properties." Foods 8, no. 2 (2019): 41. http://dx.doi.org/10.3390/foods8020041.

Full text

Abstract:

The poor bioaccessibility of the phenolic compounds of soybeans is a key challenge to developing functional food products. Therefore, a novel hydrophilic food-grade hydroxypropyl methylcellulose (HPMC) polymer was added to soybean to prepare a soybean food composite (SFC), in order to improve the soybean’s functionality. The SFC was prepared with soybean (95%) plus HPMC (5%) (w/w) mixes (HSE), as well as 100% soybean extrudate (SE), at 80 °C and 130 °C by a hot melt extrusion (HME) process. A non-extrudate 100% soybean material was considered as a control. It is observed that water solubility was significantly increased (35.18%), and particle size reached to nano-size (171.5 nm) in HSE at 130 °C compared to the control (7.14% and 1166 nm, respectively). The total phenolic, flavonoid, and single isoflavones content, including daidzin, daidzein, glycitein, genistein, and genistin was significantly increased in HSE at 130 °C compared to the control. The antioxidant properties were also significantly increased in HSE at 130 °C compared to the control, measured by 2,2-diphenyl-1 picryl hydrazyl (DPPH), a ferric reducing antioxidant power assay (FRAP), and the phosphomolybdenum method (PPMD). Finally, it is concluded that the HPMC polymer could be used as a novel excipient to develop nanocomposite via HME, in order to improve the functionality of soybean food products.

APA, Harvard, Vancouver, ISO, and other styles

46

Basyurt, Pinar Basak, Edoardo Bonizzoni, Devrim Yilmaz Aksin, and Franco Maloberti. "A 0.4-V Supply Curvature-Corrected Reference Generator With 84.5-ppm/°C Average Temperature Coefficient Within −40 °C to 130 °C." IEEE Transactions on Circuits and Systems II: Express Briefs 64, no. 4 (2017): 362–66. http://dx.doi.org/10.1109/tcsii.2016.2562738.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Zhang, Mingzhi, Zhiping Zheng, Qiuyun Fu, et al. "Growth and characterization of all-inorganic lead halide perovskite semiconductor CsPbBr3 single crystals." CrystEngComm 19, no. 45 (2017): 6797–803. http://dx.doi.org/10.1039/c7ce01709j.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Razmovski, Radojka, Vesna Vucurovic, Uros Miljic, and Vladimir Puskas. "Effect of temperature on acid hydrolysis of Jerusalem artichoke as raw material for ethanol production." Acta Periodica Technologica, no. 44 (2013): 279–87. http://dx.doi.org/10.2298/apt1344279r.

Full text

Abstract:

Jerusalem artichoke (JA) is a low-requirement crop, which does not interfere with food chain, and is a promising carbon source for industrial fermentation. Microbial conversion of such a renewable raw material to useful products, such as ethanol, is an important objective in industrial biotechnology. In this study, ethanol was efficiently produced from the hydrolyzates of JA obtained at different pH values (pH 2.5, pH 3.0 and pH 3.5), temperature (120, 130, 132 and 134?C) and hold time (30 and 60 min) by Saccharomyces cerevisiae. The efficient degradation of JA by HCl under certain experimental conditions was confirmed by thin-layer chromatography. Ethanol concentration of 7.52% (w/w), which corresponds to 93.89 % of the theoretical yield is achieved by ethanol fermentation of JA hydrolyzate obtained at pH 2.5.

APA, Harvard, Vancouver, ISO, and other styles

49

Zhou, Jun, and Rong Di Han. "Experimental Study of Green High-Speed Turning Nickel-Based Superalloy GH4169." Applied Mechanics and Materials 26-28 (June 2010): 1132–36. http://dx.doi.org/10.4028/www.scientific.net/amm.26-28.1132.

Full text

Abstract:

Knowing the stringent operating conditions to which superalloys are subjected to in automobile, aerospace and gas turbine industries, the machinability of nickel-based superalloy GH4169 is very poor, the traditional cutting fluids in GH4169 machining pollutes environments. The purpose of this study is to clarify the possibility of the turning in high speed (vc＞50m/min)[1]. In particular, the effects of the overheat water vapor with 130°C as cooling lubricant application were examined, through observation and measurement of the shape of the generated chips, machined surface integrity, cutting force and cutting temperature in a series of experiments with dry cutting or overheat water vapor with 130°C as cooling lubricant. As a result of these experiments, it was possible to measure and confirm the effects of the overheat water vapor with 130°C as cooling lubricant in high speed turning.

APA, Harvard, Vancouver, ISO, and other styles

50

Rico, Daniel, Adriana Villaverde, Cristina Martinez-Villaluenga, et al. "Application of Autoclave Treatment for Development of a Natural Wheat Bran Antioxidant Ingredient." Foods 9, no. 6 (2020): 781. http://dx.doi.org/10.3390/foods9060781.

Full text

Abstract:

The study evaluated the effect of autoclaving as a hydrothermal treatment on the quality and bioactivity of wheat bran (WB) with the objective of producing a natural ingredient with enhanced healthy properties. Nutritional, antioxidant, techno-functional and sensorial parameters were studied, and temperatures of 100, 115 and 130 °C were explored. Of these, 130 °C was found to be the best treatment, resulting in an ingredient with high storage stability, antioxidant properties, a four-fold increase in the concentration of free ferulic acid (compared with non-treated WB), and increased content of apigenin-6-C-arabinoside-8-C-hexoside, a flavonoid with reported antioxidant and antifungal properties. On the other hand, the autoclave treatment enhanced water absorption capacity and reduced WB pasting viscosity, mainly at higher temperature (130 °C), which would allow incorporation of the treated WB in liquid matrices such as juices, soups or milkshakes, among others. Although the glycemic index (GI) of the autoclaved samples increased, the use of intermediate particle size of 106 to 300 µm could contribute to the reduction of the glycemic load.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!