Academic literature on the topic 'C40-TiSi2'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'C40-TiSi2.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "C40-TiSi2"

1

Zhang, Z.-B., S.-L. Zhang, D.-Z. Zhu, H.-J. Xu, and Y. Chen. "Different routes to the formation of C54 TiSi2 in the presence of surface and interface molybdenum: A transmission electron microscopy study." Journal of Materials Research 17, no. 4 (2002): 784–89. http://dx.doi.org/10.1557/jmr.2002.0115.

Full text
Abstract:
Direct evidence revealing fundamental differences in sequence of phase formation during the growth of TiSi2 in the presence of an ultrathin surface or interface Mo layer is presented. Results of cross-sectional transmission electron microscopy showed that when the Mo layer was present at the interface between Ti films and Si substrates, C40 (Mo,Ti)Si2 formed at the interface, and Ti5Si3 grew on top after annealing at 550 °C. Additionally, both C54 and C40 TiSi2 were found in the close vicinity of the C40 (Mo,Ti)Si2 grains. No C49 grains were detected. Raising the annealing temperature to 600 °
APA, Harvard, Vancouver, ISO, and other styles
2

Chen, S. Y., Z. X. Shen, K. Li, A. K. See, and L. H. Chan. "Synthesis and characterization of pure C40 TiSi2." Applied Physics Letters 77, no. 26 (2000): 4395–97. http://dx.doi.org/10.1063/1.1329864.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Quintero, A., M. Libera, C. Cabral, C. Lavoie, and J. M. E. Harper. "Mechanisms for enhanced C54–TiSi2 formation in Ti–Ta alloy films on single-crystal Si." Journal of Materials Research 14, no. 12 (1999): 4690–700. http://dx.doi.org/10.1557/jmr.1999.0635.

Full text
Abstract:
The mechanisms are studied for enhanced formation of C54–TiSi2 at about 700 °C when rapid thermal annealing at 3 °C/s in N2 is performed on 32-nm-thick codeposited Ti–5.9 at.% Ta on Si(100) single-crystal substrates. The enhancement is related to an increased C54–TiSi2 nucleation rate due to the development of a multilayered microstructure. The multilayer microstructure forms at temperatures below 600 °C with the formation of an amorphous disilicide adjacent to the Si substrate and a M5Si3 (M = Ti, Ta) capping layer. This amorphous disilicide crystallizes at higher temperatures to C49–TiSi2. T
APA, Harvard, Vancouver, ISO, and other styles
4

Li, K., S. Y. Chen, and Z. X. Shen. "Identification of refractory-metal-free C40 TiSi2 for low temperature C54 TiSi2 formation." Applied Physics Letters 78, no. 25 (2001): 3989–91. http://dx.doi.org/10.1063/1.1378309.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yu, T., S. C. Tan, Z. X. Shen, L. W. Chen, J. Y. Lin, and A. K. See. "Structural study of refractory-metal-free C40 TiSi2 and its transformation to C54 TiSi2." Applied Physics Letters 80, no. 13 (2002): 2266–68. http://dx.doi.org/10.1063/1.1466521.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Quintero, A., M. Libera, C. Cabral, C. Lavoie, and J. M. Harper. "Templating Effects On C54-Tisi2 Formation In Ternary Reactions." Microscopy and Microanalysis 4, S2 (1998): 666–67. http://dx.doi.org/10.1017/s143192760002345x.

Full text
Abstract:
Titanium disilicide (C54-TiSi2) is a low resistivity silicide (15 - 20 μΩ-cm) and is widely used in the device industry. It is formed at about 750-850 °C when thin layers (∽30- lOOnm) of Ti on poly- or single-crystal Si substrates are subjected to rapid thermal annealing (3 °C/sec) in a controlled atmosphere (N2). During the anneal, other Ti silicides such as Ti5Si3, Ti5Si4 ,TiSi and C49-TiSi2 may form prior to the desirable C54-TiSi2.Some attempts have been made to promote low-temperature C54-TiSi2 formation. Depositing a Mo (l-2nm) interlayer between Ti and Si has been reported to decrease t
APA, Harvard, Vancouver, ISO, and other styles
7

Esposito, L., S. Kerdilès, M. Gregoire, et al. "Impact of nanosecond laser energy density on the C40-TiSi2 formation and C54-TiSi2 transformation temperature." Journal of Applied Physics 128, no. 8 (2020): 085305. http://dx.doi.org/10.1063/5.0016091.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wang, R. N., J. Y. Feng, and Y. Huang. "Effects of intermediate phase C40 TiSi2 on the formation temperature of C54 TiSi2 with a Ta interlayer." Journal of Crystal Growth 253, no. 1-4 (2003): 280–85. http://dx.doi.org/10.1016/s0022-0248(03)01012-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Káňa, T., Mojmír Šob, and V. Vitek. "Transformation Paths in Transition-Metal Disilicides." Key Engineering Materials 465 (January 2011): 61–64. http://dx.doi.org/10.4028/www.scientific.net/kem.465.61.

Full text
Abstract:
We suggest and investigate three possible displacive transformation paths between the ideal C11b, C40 and C54 structures in MoSi2, VSi2 and TiSi2 by calculating ab initio total energies along these paths. An estimate of transition temperatures based on the calculated energy barriers leads to values comparable with the melting temperatures of the disilicides studied. This confirms their high temperature stability and indicates that if a phase transformation between C11b, C40 and C54 structures of the disilicides takes place, then its prevailing mechanism should be diffusional rather than marten
APA, Harvard, Vancouver, ISO, and other styles
10

Via, F. La, F. Mammoliti, and M. G. Grimaldi. "Reaction of the Si/Ta/Ti system: C40 TiSi2 phase formation andin situkinetics." Journal of Applied Physics 91, no. 2 (2002): 633–38. http://dx.doi.org/10.1063/1.1421212.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "C40-TiSi2"

1

Esposito, Laura. "Mise en oeuvre de procédés innovants pour l'optimisation de contacts TiSi pour les technologies imageurs avancées." Electronic Thesis or Diss., Aix-Marseille, 2021. http://theses.univ-amu.fr.lama.univ-amu.fr/210319_ESPOSITO_505pj561fjb969hmp55qmrno_TH.pdf.

Full text
Abstract:
Dans les dispositifs de capteurs d’image les siliciures de titane sont utilisés afin de réaliser les contacts entre les transistors et les interconnections de cuivre. Une nouvelle problématique émerge alors d’une co-intégration des contacts en siliciures de Ti et de nickel : former le siliciure de titane optimal (C54-TiSi2) a une température plus faible que la température de formation classique (800°C). Afin de réduire la température de formation du siliciure, l’influence du recuit laser nanoseconde UV (UV-NLA) sur la formation des contacts en siliciures de Ti a été étudiée. Pour cela, des dép
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!