Log in

Relevant bibliographies by topics / Cable and conductor products / Journal articles

To see the other types of publications on this topic, follow the link: Cable and conductor products.

Journal articles on the topic 'Cable and conductor products'

Author: Grafiati

Published: 30 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Cable and conductor products.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Bezprozvannych, G. V., M. V. Grynyshyna, and Y. S. Moskvitin. "Requirements for cables as categories of construction products and thermal resistance of power cables." Electrical Engineering & Electromechanics, no. 1 (January 1, 2024): 61–68. http://dx.doi.org/10.20998/2074-272x.2024.1.08.

Full text

Abstract:

Introduction. One of the main driving factors of the demand for cable and conductor products is the modern trend of urbanization, which leads to an increase in cities with significantly increased requirements for electrical networks of transportation and distribution of electrical energy. This requires the development of appropriate infrastructure with significant demand for electricity in the commercial, industrial and residential sectors. The construction industry uses a wide range of cables with an appropriate set of electrical and mechanical properties, resistance to the influence of exter

APA, Harvard, Vancouver, ISO, and other styles

2

Bezprozvannych, G. V., M. V. Grynyshyna, and Y. S. Moskvitin. "Requirements for cables as categories of construction products and thermal resistance of power cables." Electrical Engineering and Electromechanics 2024, no. 1 (2024): 61–68. https://doi.org/10.20998/2074-272X.2024.1.08.

Full text

Abstract:

<strong><em>Introduction</em></strong><em>. One of the main driving factors of the demand for cable and conductor products is the modern trend of urbanization, which leads to an increase in cities with significantly increased requirements for electrical networks of transportation and distribution of electrical energy. This requires the development of appropriate infrastructure with significant demand for electricity in the commercial, industrial and residential sectors. The construction industry uses a wide range of cables with an appropriate set of electrical and mechanical properties, resist

APA, Harvard, Vancouver, ISO, and other styles

3

Ivanova, Vera Pavlovna, and Victoria Vyacheslavovna Tsypkina. "Improving the reliability of power supply to active consumers by improving the technology for manufacturing cable product." E3S Web of Conferences 216 (2020): 01152. http://dx.doi.org/10.1051/e3sconf/202021601152.

Full text

Abstract:

The growing demand for high-quality transmission of electrical energy with a high level of reliability of cable lines is determined not only by the conditions of operation, installation, but also by the technology of cable production. This article discusses the issues of increasing the reliability of power supply to active consumers, which is achieved through the use of cable products with a higher level of reliability. The concept of "reliability", disclosed in the article, is valid for all cables and wires with insulation, which must maintain integrity as part of the product for the entire p

APA, Harvard, Vancouver, ISO, and other styles

4

Almahdy, Indra. "Implementation of Lean Manufacturing for Increasing the Quality of Aluminum Conductor Products in the Stranding Process with the DMAIC and VSM Method Approach: A Case Study in Electrical Manufacturing Component." International Journal of Scientific and Academic Research 03, no. 07 (2023): 01–08. http://dx.doi.org/10.54756/ijsar.2023.v3.7.1.

Full text

Abstract:

ElectricalCompany in this study is a manufacturing company engaged in the cable industry and one of the products it produces is an aluminum conductor. The current situation shows that the quality of aluminum conductor products still does not meet thecompany's standards. This can be seen from the production output data for the period June 2021 –November 2021 where the percentage ofaluminum conductor product faiuresexceeds the set target of 1.50%. The purpose of this research is to implement lean manufacturing to improve the quality of aluminum conductor products using the DMAIC (Define, Measure

APA, Harvard, Vancouver, ISO, and other styles

5

Tsypkina, V. V., V. P. Ivanova, and K. K. Jurayeva. "Cable conductor of cabling and wiring products based on composite materials for transport systems." E3S Web of Conferences 401 (2023): 03036. http://dx.doi.org/10.1051/e3sconf/202340103036.

Full text

Abstract:

The article deals with the issues of working out the technology of manufacturing cabling and wiring products that are used in railway transport systems. A cable conductor for a cable product, made on the basis of composite materials, was adopted as the object of research. The technology of production of composite billets and wire for cable products for subsequent drawing, as well as ways of obtaining them, is covered in detail. Special attention is paid to the problems of operation in railway transport, power transmission systems, which confirms the relevance of the research. The increase in t

APA, Harvard, Vancouver, ISO, and other styles

6

Yarkimbaev, Sh S., E. M. Fedorov, V. V. Redko, O. V. Galtseva, and X. Jiang. "Study of physical control methods for metric parameters of extended products in cable industry." Bulletin of the Karaganda University. "Physics" Series 106, no. 2 (2022): 7–17. http://dx.doi.org/10.31489/2022ph2/7-17.

Full text

Abstract:

The paper discusses the problems of electrical cables metric (geometric) parameters measurement. The methods of measuring the eccentricity of the electric cables (contact, ultrasonic, X-ray, and inductive-optical) are considered. The advantages and disadvantages of using these methods of technological control of cable products are shown. A study of the inductive-optical conversion method for measuring the eccentricity of a singlecore cable, including the circuit for switching on the windings of the inductive converter, is proposed; the design of this converter is presented. The proposed soluti

APA, Harvard, Vancouver, ISO, and other styles

7

Liu, Yuanchang, Shintaro Furuno, Sosuke Akagawa, et al. "Odor Recognition of Thermal Decomposition Products of Electric Cables Using Odor Sensing Arrays." Chemosensors 9, no. 9 (2021): 261. http://dx.doi.org/10.3390/chemosensors9090261.

Full text

Abstract:

An odor sensing system with chemosensitive resistors was used to identify the gases generated from overheated cables to prevent fire. Three different electric cables for a distribution cabinet were used. The cables had an insulation layer made of polyvinyl chloride (PVC) or cross-linked polyethylene (XLPE). The heat resistance of the cables was tested by differential thermal and thermogravimetric analyses. The thermal decomposition products of the cables were investigated by gas chromatography-mass spectrometry (GC-MS). For the odor sensing system, two types of 16-channel array were used to de

APA, Harvard, Vancouver, ISO, and other styles

8

Rudyk, Yu I., and V. M. Shunkin. "DETERMINATION OF THE QUANTITY OF COMBUSTIBLE MATERIAL IN CABLE PRODUCTS IN THE PROCESS OF FIRE SAFETY TESTING." Fire Safety, no. 34 (July 19, 2019): 78–83. http://dx.doi.org/10.32447/20786662.34.2019.13.

Full text

Abstract:

Introduction. In order to protect objects from dangerous manifestations of fire of cable products, electrical lines are designed and projected in accordance with the fire-protection requirements and the normative documents. Purpose. The purpose of this article is to analyze this problem in several areas concerning the situation with a systematic approach to the technical regulation in Ukraine of such a sector of fire safety as the requirements for cable-wiring lines. Methods. Methods of research: calculations using a mathematical model; comparison of the results of the calculation, forecasting

APA, Harvard, Vancouver, ISO, and other styles

9

Kushnirenko, Оksana, та Oleksandr Deineko. "The adoption of the АСАА in the interests of Ukrainian producers and public safety". University Economic Bulletin, № 45 (27 травня 2020): 84–92. http://dx.doi.org/10.31470/2306-546x-2020-45-84-92.

Full text

Abstract:

Relevance of the research topic. Identification of the features of negative influence on the further development of Ukrainian production of cable and wire products, namely, the growth of imports of low-quality products and saturation of the market with counterfeit products, which leads to a decrease in production volumes, a reduction in productioncapacities, and profit losses for most Ukrainian manufacturers. In addition, the inefficiency of technical regulation programs leads to threats the security of the society: the use of counterfeit products is one of the causes of fires, which leads to

APA, Harvard, Vancouver, ISO, and other styles

10

Yao, Guowen, Xuanbo He, Jiawei Liu, Zengwei Guo, and Pengyu Chen. "Test Study of the Bridge Cable Corrosion Protection Mechanism Based on Impressed Current Cathodic Protection." Lubricants 11, no. 1 (2023): 30. http://dx.doi.org/10.3390/lubricants11010030.

Full text

Abstract:

The cable system is an important bearing element of a bridge with stay cables or slings and a matter of major concern in the safety of the bridge structure. Bridge cables are vulnerable to corrosion induced by leakage and soaking during their service life. To solve this problem, and based on the idea of proactive control by means of the impressed current cathodic protection (ICCP) of bridge cables, this study designs and develops an ICCP system device for bridge cable protection. In this study, an accelerated corrosion test was conducted to test the ICCP system of steel wires inside the cables

APA, Harvard, Vancouver, ISO, and other styles

11

Gravit, M. V., M. D. Antonov, A. A. Varlamkin, and V. A. Prusakov. "Assessment of the Impact of Burning Cable Lines in Cable Ducts on the Temperature of Enclosing Structures of Buildings and Facilities." Occupational Safety in Industry, no. 4 (April 2025): 36–42. https://doi.org/10.24000/0409-2961-2025-4-36-42.

Full text

Abstract:

Every year, the number of fires caused by cables and wires is growing. Burning of cables is accompanied by active emission of heat and toxic products. The analysis of scientific papers and tests has shown that the conductor's shape, the number of cable cores, the insulation material, the number of conductors, and their packing density affect this process. The study considers the impact of burning cable lines in cable ducts on the temperature of enclosing structures of a building in a standard temperature mode. For these purposes, fire tests and modeling have been conducted in the ANSYS softwar

APA, Harvard, Vancouver, ISO, and other styles

12

Ivanova, Evgenia V., Olga S. Yashutina, and Stanisla V. Shidlovskiy. "Influence of the air Layer Between the Conductor and the Layer Ofinsulating Material in Cable Products." EPJ Web of Conferences 110 (2016): 01025. http://dx.doi.org/10.1051/epjconf/201611001025.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Ivanova, Veronica, and Daniyar Madrakhimov. "Direct flow drawing equipment performance reliability and increase of its effectiveness." E3S Web of Conferences 139 (2019): 01057. http://dx.doi.org/10.1051/e3sconf/201913901057.

Full text

Abstract:

It is an analytic investigation of issues related to improving the efficiency and reliability of the drawing technological process, which are to be considered. After analytical efforts, a technical solution is proposed and justified. This technical solution is meant to improve the operational parameters of the cable products current-carrying conductor – reducing electrical resistance by reducing the fractional deformation and recalculating of the drawing sequence.

APA, Harvard, Vancouver, ISO, and other styles

14

Смелков, Г. И., Г. В. Боков, А. А. Назаров та О. И. Грузинова. "Актуальные вопросы обеспечения пожарной безопасности электроустановочных устройств". Pozharnaia bezopasnost`, № 1(118) (6 березня 2025): 82–90. https://doi.org/10.37657/vniipo.pb.2025.118.1.008.

Full text

Abstract:

В статье, исходя из анализа статистических данных, констатируется и обосновывается актуальность проблемы обеспечения пожарной безопасности электроустановочных устройств (далее – ЭУУ), имеющих весьма широкое применение на различных объектах (в жилых, общественных, промышленных и других зданиях) для коммутации электрических цепей (выключатели), для подсоединения электропотребителей к сети (штепсельные розетки), для электроснабжения удаленных от стационарных розеток потребителей (электроудлинители) и других задач. Исследования показали, что пожарная опасность ЭУУ во многом связана с увеличением в

APA, Harvard, Vancouver, ISO, and other styles

15

Bezprozvannych, G. V. "ENERGY DISSIPATION BY LOW MOLECULAR SUBSTANCES DURING ELECTRIC FIELD PROBING OF MULTI-CORE CABLES OF NUCLEAR POWER PLANTS." Tekhnichna Elektrodynamika 2024, no. 3 (2024): 12–18. http://dx.doi.org/10.15407/techned2024.03.012.

Full text

Abstract:

A model of the piece-homogeneous interphase space of stranded cables is proposed, taking into account the influence of cracks oriented along the lines of force of the electric field. The cracks are filled with low molecular weight substances. The case of a probing electric field with a significant tangential component is considered.. The equivalent values of the tangent of the dielectric loss angle at various parameters of low molecular weight substances in the cracks of the polyethylene insulation of the conductor with a cross section of 2.5 mm2 were determined. The equivalent tangent of the

APA, Harvard, Vancouver, ISO, and other styles

16

Phifer, Virginia, Michael Small, Griffin Bradford, Jeremy Weiss, Danko van der Laan, and Lance Cooley. "Investigations in the tape-to-tape contact resistance and contact composition in superconducting CORC^® wires." Superconductor Science and Technology 35, no. 6 (2022): 065003. http://dx.doi.org/10.1088/1361-6668/ac662f.

Full text

Abstract:

Abstract Conductor on Round Core (CORC®) wires and cables, constructed from multiple layers of helically wound REBa2Cu3O7−δ tapes, are a promising cable technology for high field magnet applications. An important feature of high-temperature superconductor cables is the ability to share current between conductors, allowing current to bypass drops in I c and minimizing the risk of hot spot formation, which could lead to potential burnout in the superconductor. In contrast to stacked-tape cables, which have continuous contact between tapes, in CORC® the transfer points occur at discrete tape cros

APA, Harvard, Vancouver, ISO, and other styles

17

Liu, Shengjun, Yanzeng Yin, Hongbin Qi, and Xuejia Wang. "Research on Electromagnetic Interference of Lightning Current on Secondary Cable in Substation." Journal of Physics: Conference Series 2224, no. 1 (2022): 012048. http://dx.doi.org/10.1088/1742-6596/2224/1/012048.

Full text

Abstract:

Abstract Secondary cable is an important equipment for ubiquitous power Internet of things to transmit information. When the substation grounding grid is struck by lightning, part of the lightning current flows through the shielding layer of secondary cable and produces core-to-sheath potential difference, which seriously threatens the safety of the secondary system. Fourier transform was used to decompose the lightning current in frequency domain, and the core-to-sheath potential difference at the end of the secondary cable was obtained by calculating the shielding layer current and transfer

APA, Harvard, Vancouver, ISO, and other styles

18

Ruslan, Mohd Fuad Anwari Che, Dong Joon Youn, Roshan Aarons, Yabin Sun, and Shuyu Sun. "Numerical Study of CH4 Generation and Transport in XLPE-Insulated Cables in Continuous Vulcanization." Materials 13, no. 13 (2020): 2978. http://dx.doi.org/10.3390/ma13132978.

Full text

Abstract:

In this work, we apply a computational diffusion model based on Fick’s laws to study the generation and transport of methane (CH 4 ) during the production of a cross-linked polyethylene (XLPE) insulated cable. The model takes into account the heating process in a curing tube where most of the cross-linking reaction occurs and the subsequent two-stage cooling process, with water and air as the cooling media. For the calculation of CH 4 generation, the model considers the effect of temperature on the cross-linking reaction selectivity. The cross-linking reaction selectivity is a measure of the p

APA, Harvard, Vancouver, ISO, and other styles

19

Chulieieva, Olena, Volodymyr Zolotaryov, Volodymyr Chulieiev, Tetiana Kuleshova, and Mykola Suslin. "The viscoelastic properties of a halogen-free polymer composition, for cable products." Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies, no. 4 (10) (December 30, 2021): 67–74. http://dx.doi.org/10.20998/2413-4295.2021.04.09.

Full text

Abstract:

The viscoelastic properties of a halogen-free polymer composition for cable products have been investigated. The influence of temperature parameters, shear rate on the die-swell ratio of the polymer composition has been determined; the dependence of the melt density on a temperature was investigated. The polymer matrix is a mixture of polyolefins (linear low density polyethylene; polyolefin elastomer and maleic anhydride modified linear low density polyethylene) as a flame retardant filler for the polymer composition is trihydrate alumina. The content of flame retardant filler in the polymer c

APA, Harvard, Vancouver, ISO, and other styles

20

Koshel, Oleksandr. "EXAMINATION OF COUNTERFEIT CONDUCTORS WITH SIGNS OF A SHORT CIRCUIT." Criminalistics and Forensics, no. 67 (August 9, 2022): 410–16. http://dx.doi.org/10.33994/kndise.2022.67.41.

Full text

Abstract:

The article reviews an expert study of conductors with melting due to a short circuit from the places of fires. Given the urgency of the problem of low-quality conductors on sale, the issue of studying such objects is considered. The use of counterfeit cable and wire products leads to fires, resulting in both material losses and deaths, while the number of fires caused by low-quality products is increasing. For the most used copper wires, the electrical properties are determined by the presence of impurities, some of which have a significant effect on electrical resistance. The technical stand

APA, Harvard, Vancouver, ISO, and other styles

21

Troshkin, S. "CONDUCTING A NATURAL FIRE TEST IN THE VERTICAL CABLE TUNNEL OF A NUCLEAR POWER PLANT." Municipal economy of cities 6, no. 180 (2023): 168–75. http://dx.doi.org/10.33042/2522-1809-2023-6-180-168-175.

Full text

Abstract:

The article discusses conducting a full-scale fire test in the vertical cable tunnel of a nuclear power plant (NPP). Vertical cable tunnels in NPPs are used for laying cable lines, wires, safety system lines, connecting the equipment room, and the containment of the nuclear power plant block. The paper analyses research methods and selects options that will be effectively used to determine the temperature regime in the vertical cable tunnel of NPPs with known aerodynamic, technical, and geometric parameters and fire loads. The algorithm for conducting full-scale tests in the vertical cable tun

APA, Harvard, Vancouver, ISO, and other styles

22

M., I. Baranov, and V. Rudakov S. "CALCULATION-EXPERIMENTAL DETERMINATION OF THE AVERAGE NUMBER OF QUANTIZED LONGITUDINAL ELECTRON DE BROGLIE HALF WAVES IN A CYLINDRICAL CONDUCTOR WITH PULSED AXIAL CURRENT." Electrical engineering & electromechanics, no. 2 (April 16, 2020): 33–39. https://doi.org/10.20998/2074-272X.2020.2.05.

Full text

Abstract:

<strong><em>Purpose.</em></strong><em> Implementation of calculation-experimental determination of average number n</em><sub>0<em>m</em></sub><em> of the quantized longitudinal electron de Broglie half waves of length λ<sub>ezm</sub>/2 in the metal cylindrical conductor with the pulsed axial current of high density.</em><em> <strong>Methodology.</strong> Scientific bases of theoretical electrophysics and quantum physics, theoretical bases of the electrical engineering, electrophysics bases of technique of high-voltage and high pulsed currents. <strong>Results.</

APA, Harvard, Vancouver, ISO, and other styles

23

Setiawan, Muhammad Gandi, Tamrin Tamrin, and Sandi Asmara. "Rancang Bangun Kereta Gantung Pengangkut Produk Hasil Pertanian." Jurnal Agricultural Biosystem Engineering 1, no. 3 (2022): 311. https://doi.org/10.23960/jabe.v1i3.6322.

Full text

Abstract:

Problems in the agricultural sector are not only in the process of plant maintenance activities, but also because of the location of agricultural land that is not always easily accessible such as in mountainous areas and mountain slopes. This is certainly one of the obstacles for farmers in terms of transporting agricultural products. Cable cars are one of the innovations of transportation equipment that transport agricultural products that can be developed to help and facilitate the work of farmers effectively and efficiently. This study aims to design and make cable cars as a means of transp

APA, Harvard, Vancouver, ISO, and other styles

24

Isamukhamedov, Dilshod Nigmatullaevich, Daniyar Bakhtiyarovich Madrahimov, Rano Fazildzhanovna Atamukhamedova, and Nigora Jakhongirovna Tairova. "Issues of improving quality of contact wire." E3S Web of Conferences 216 (2020): 01154. http://dx.doi.org/10.1051/e3sconf/202021601154.

Full text

Abstract:

The article deals with the issues of improving the reliability of cable operation and conductor products, due to its quality improvement. Research work was carried out on the example of a МF-100-grade contact wire, which is used in the operation of electrified railway and urban transport in the Republic of Uzbekistan and in other countries. The solution of the issue of improving reliability in the operation of the above-mentioned wire is reduced to improving the manufacturing technology, as well as making changes to the method of calculating the drawing route. The result of the work is the imp

APA, Harvard, Vancouver, ISO, and other styles

25

Yermoshin, Nikolay I., Evgeny V. Yakimov, Aleksandr E. Goldshtein, and Dmitry A. Sednev. "Increase in Fast Response Time of the Resistance-to-Voltage Converter When Monitoring the Cable Products’ Insulation Resistance." Sensors 21, no. 2 (2021): 368. http://dx.doi.org/10.3390/s21020368.

Full text

Abstract:

Theoretical and experimental studies were conducted to investigate the impact of the cable capacitance during measurements of insulation resistance on the fast response time of a resistance-to-voltage converter. From a comparison of the results of simulation with the data obtained during the experiments, it was determined that the dependence characteristics of the settling time of resistance under measurement on the capacitance are identical to the analogous characteristics of electronic components of the resistance-to-voltage converter. It was experimentally proven that using T-shaped feedbac

APA, Harvard, Vancouver, ISO, and other styles

26

Yermoshin, Nikolay I., Evgeny V. Yakimov, Aleksandr E. Goldshtein, and Dmitry A. Sednev. "Increase in Fast Response Time of the Resistance-to-Voltage Converter When Monitoring the Cable Products’ Insulation Resistance." Sensors 21, no. 2 (2021): 368. http://dx.doi.org/10.3390/s21020368.

Full text

Abstract:

Theoretical and experimental studies were conducted to investigate the impact of the cable capacitance during measurements of insulation resistance on the fast response time of a resistance-to-voltage converter. From a comparison of the results of simulation with the data obtained during the experiments, it was determined that the dependence characteristics of the settling time of resistance under measurement on the capacitance are identical to the analogous characteristics of electronic components of the resistance-to-voltage converter. It was experimentally proven that using T-shaped feedbac

APA, Harvard, Vancouver, ISO, and other styles

27

Godec, Damir, Mario Brozović, and Tomislav Breški. "Topology Optimization of Electric Train Cable Carrier." Tehnički glasnik 17, no. 2 (2023): 244–50. http://dx.doi.org/10.31803/tg-20230426184514.

Full text

Abstract:

In the area of mobility (transport), great efforts are being made to optimize means of transport. While reducing their mass the main goal is to maintain or even improve the performance of the means of transport. Additive manufacturing allows the production of very complex geometric shapes of products that cannot be made by traditional production processes; therefore it has become one of the significant tools in the design of modern vehicles or their parts. Additive manufacturing, combined with appropriate computer tools for numerical design analysis, also allows optimization of product design

APA, Harvard, Vancouver, ISO, and other styles

28

Rizqi, Ganis Ashari. "When the Greedy Giant Tumbling Down: Analyzing Nickelodeon's Spatialization Practice in Indonesia." E3S Web of Conferences 73 (2018): 10010. http://dx.doi.org/10.1051/e3sconf/20187310010.

Full text

Abstract:

The developments of technology and globalization have made the emergence of various changes in media industry. In the entertainment sector various children programs can be broadcasted easily in Indonesia through the cable television industry. Unfortunately, the market share of cable industry is currently experiencing sluggishness. It encourages Nickelodeon to apply certain ways to keep its products dominance in Indonesia. Using spatialization approach in the study of the political economy media, this article aims to describe how Nickelodeon, maintains its product dominance to face that conditi

APA, Harvard, Vancouver, ISO, and other styles

29

Garrido-Varo, Ana, Ana Sánchez-Bonilla, Francisco Maroto-Molina, Cecilia Riccioli, and Dolores Pérez-Marín. "Long-Length Fiber Optic Near-Infrared (NIR) Spectroscopy Probes for On-Line Quality Control of Processed Land Animal Proteins." Applied Spectroscopy 72, no. 8 (2018): 1170–82. http://dx.doi.org/10.1177/0003702817752111.

Full text

Abstract:

This research was conducted using a spectral database comprising 346 samples of processed animal proteins (PAPs) with a range of compositions, analyzed using a Fourier transform near-infrared spectroscopy multichannel instrument (Matrix-F, Bruker Optics) coupled to a 100 m fiber optic cable. Using both its static and dynamic operating modes (on a conveyor belt), simulating the movement of the product in the plant, the predictive capabilities of both modes of analysis were assessed and compared, for the purposes of predicting moisture, protein, and ashes. The results show that both exhibit high

APA, Harvard, Vancouver, ISO, and other styles

30

Rondineau, Alan, Laurent Gaillet, Lamine Dieng, and Sébastien Langlois. "Degradation of Steel Wires in Bimetallic Aluminum–Steel Conductors Exposed to Severe Corrosion Conditions." Corrosion and Materials Degradation 3, no. 4 (2022): 646–60. http://dx.doi.org/10.3390/cmd3040035.

Full text

Abstract:

High-voltage electrical cables are prone to saline corrosion, mostly in coastal environments. Steel wires are a crucial element in withstanding the mechanical solicitations of commonly used aluminum conductor steel reinforced (ACSR) cables. An experimental accelerated corrosion test was made, using salt spray tests on greased and ungreased ACSR cables and individual galvanized steel wires. The corrosion mechanism occurring on the specimens was observed by optical microscopy for several durations of corrosion, to determine the evolution of the galvanic layer and steel substrate degradation. Thi

APA, Harvard, Vancouver, ISO, and other styles

31

Navas-Reascos, Gabriel E., David Romero, Ciro A. Rodriguez, Federico Guedea, and Johan Stahre. "Wire Harness Assembly Process Supported by a Collaborative Robot: A Case Study Focus on Ergonomics." Robotics 11, no. 6 (2022): 131. http://dx.doi.org/10.3390/robotics11060131.

Full text

Abstract:

Products and assets are becoming increasingly “smart”, e.g., mechatronic, electronic, or cyber-physical. In the lack of fully reliable wireless solutions, extensive wiring and wire bundling into wire harnesses are needed. This has manufacturing implications, leading to increasingly complex wire harness assembly processes, where numerous components, connectors, and cables are assembled, connecting critical and non-critical electric and electronic systems in smart products and assets. Thus, wire harnesses demand is rapidly rising in most industries, requiring human or robotic work. Often, requir

APA, Harvard, Vancouver, ISO, and other styles

32

Nilsson, Douglas Jutsell, Stanislaw M. Gubanski, and Yuriy V. Serdyuk. "Electrical Detection of Degradation in Specimens of HVDC Cable Insulation." Energies 13, no. 15 (2020): 3963. http://dx.doi.org/10.3390/en13153963.

Full text

Abstract:

One of the challenges in laboratory investigation of degradation and ageing of HVDC cable insulation is related to securing, or in other words, imitating the real service environment of the material specimens. So far, the published data refer to experiments conducted in thermo-oxidative conditions, which is not the case during normal cable operation. In service, the cable insulation is protected by a metallic barrier that blocks the transfer of any substances in and out of the construction. By-products from the cross-linking reactions cannot diffuse out and any foreign substances are blocked f

APA, Harvard, Vancouver, ISO, and other styles

33

Sugiartawan, Putu, Yusril Eka Saputra, and Agus Qomaruddin Munir. "Convolutional Long Short-Term Memory (C-LSTM) For Multi Product Prediction." IJCCS (Indonesian Journal of Computing and Cybernetics Systems) 17, no. 4 (2023): 417. http://dx.doi.org/10.22146/ijccs.90149.

Full text

Abstract:

The retail company PT Terang Abadi Raya has a solid commitment to supporting distributors of LED lights and electrical equipment who have joined them, helping to spread their products widely in various regions. To face increasingly intense market competition, it is essential to produce high-quality products to win the competition and meet consumer demands. To achieve this, efficient production planning is necessary. The Convolutional Long Short-Term Memory (C-LSTM) method is used in this study to forecast product sales at PT Terang Abadi Raya. The research results show that C-LSTM has the pote

APA, Harvard, Vancouver, ISO, and other styles

34

Fedulova, Olena, Oleksandr Koshel, and Volodymyr Prystupa. "FEATURES OF THE STUDY OF BIMETALLIC CONDUCTORS WITH SIGNS OF A SHORT CIRCUIT." Criminalistics and Forensics, no. 67 (August 9, 2022): 417–26. http://dx.doi.org/10.33994/kndise.2022.67.42.

Full text

Abstract:

In the process of investigating fires, the version of involvement in the occurrence of burning emergency modes in electrical equipment and electrical wiring often becomes one of the main ones. The consequence of the current overload of electrical conductors is the appearance of localized short circuit melting on them. In the indicated context, the most important stage of the study is the establishment of a direct or reverse causal relationship between a fire and a short circuit. The latter is possible due to the fact that the conductor metal is able to store situational trace information in th

APA, Harvard, Vancouver, ISO, and other styles

35

Jutsell Nilsson, Douglas, and Stanislaw Gubanski. "Electrical detection of degradation in specimens of HVDC cable insulation." Proceedings of the Nordic Insulation Symposium, no. 26 (August 7, 2019): 43–46. http://dx.doi.org/10.5324/nordis.v0i26.3276.

Full text

Abstract:

One of the challenges in laboratory investigation of degradation and ageing of HVDC cable insulation is related to securing, or in other words, imitating the real service environment of the material specimens. So far, the published data refer to experiments conducted in thermo-oxidative conditions, which is not the case during normal cable operation. In reality the cable insulation is protected by a metallic barrier that blocks the transfer of any substances in and out of the construction. By-products from the cross-linking reactions cannot diffuse out and any foreign substances, such as oxyge

APA, Harvard, Vancouver, ISO, and other styles

36

Zolotaryov, V. M., O. V. Chulieieva, V. L. Chulieiev, T. A. Kuleshova, and M. S. Suslin. "Influence of doping additive on thermophysical and rheological properties of halogen-free polymer composition for cable insulation and sheaths." Electrical Engineering & Electromechanics, no. 2 (April 18, 2022): 35–40. http://dx.doi.org/10.20998/2074-272x.2022.2.06.

Full text

Abstract:

Introduction. The demand for halogen-free fire-resistant compositions for the manufacture of fire-retardant wires and cables is constantly growing. Problem. Therefore, the creation and further processing of these materials is an urgent problem. Goal. The aim of the article is to study the effect of the doping additive on the thermophysical and rheological properties of halogen-free compositions for power cables with voltage 1 kV with the determination of both the temperatures of phase and structural transformations of polymer compositions. Methodology. Experiments investigating the phase trans

APA, Harvard, Vancouver, ISO, and other styles

37

Kravets, I. P., O. I. Bashynskiy, A. P. Kushnir, and O. V. Shapovalov. "FACTORS OF FIRE HAZARD OF ELECTRICITY-GENERATING EQUIPMENT." Fire Safety, no. 34 (July 19, 2019): 43–46. http://dx.doi.org/10.32447/20786662.34.2019.07.

Full text

Abstract:

The article deals with the problems of fire hazard of electricity-generating equipment during their exploitation. Intensive electrification of industrial and residual objects leads to the saturation of these objects with different electricity-generating equipment. Functioning of such equipment is accompanied with high heat emission and contains significant fire hazard. The electric current in an electrical conductor produces heat, when electric energy turns into thermal. All electrical equipment must be produced in strict adherence to fire safety rules and requirements. Ignoring these requirem

APA, Harvard, Vancouver, ISO, and other styles

38

Smelkov, G. I., V. A. Pekhotikov, A. I. Ryabikov, and A. A. Nazarov. "Wired and Cable Networks of Fire-hazardous Zones." Occupational Safety in Industry, no. 9 (September 2021): 63–68. http://dx.doi.org/10.24000/0409-2961-2021-9-63-68.

Full text

Abstract:

The urgency of the issue to be considered is conditioned by the high fire hazard of electric cables of the voltage up to 1000 V. As a result of fires associated with this type of products at the industrial and storage units in 2020 in Russia, the volume of direct loss exceeded 68 % comparing to the fires caused by all other types of cable lines occurred at enterprises. The high fire hazard of industrial facilities is mainly associated with numerous fire-hazardous premises containing combustible media capable of inflammation under the impact of ignition sources. In order to reduce their fire ha

APA, Harvard, Vancouver, ISO, and other styles

39

VAKHITOVA, R. I., D. A. SARACHEVA, and K. R. URAZAKOV. "RADIAL COMPENSATOR TO REDUCE THE LEVEL OF EMERGENCY IN OIL PRODUCTS WELLS." News of the Tula state university. Sciences of Earth 3, no. 1 (2023): 146–55. http://dx.doi.org/10.46689/2218-5194-2023-3-1-146-155.

Full text

Abstract:

The main cause of accidents with submersible installations of electric centrifugal pumps is an increased level of vibration of the installation. An important way to protect against increased vibration level is vibration isolation. The authors propose a radial compensator to reduce the formation of limit values of stress concentrations in the tubing string, to prevent them from breaking to the bottom of the well, twisting the electrical cable of the submersible pumping unit. In order to evaluate the efficiency of using a radial compensator, tests were performed on a vertical automated VIG-98 te

APA, Harvard, Vancouver, ISO, and other styles

40

V., M. Zolotaryov, V. Chulieieva O., L. Chulieiev V., A. Kuleshova T., and S. Suslin M. "Influence of doping additive on thermophysical and rheological properties of halogen-free polymer composition for cable insulation and sheaths." Electrical Engineering & Electromechanics, no. 2 (April 18, 2022): 35–40. https://doi.org/10.20998/2074-272X.2022.2.06.

Full text

Abstract:

<strong><em>Introduction. </em></strong><em>The demand for halogen-free fire-resistant compositions for the manufacture of fire-retardant wires and cables is constantly growing. <strong>Problem. </strong>Therefore, the creation and further processing of these materials is an urgent problem. <strong>Goal.</strong> The aim of the article is to study the effect of the doping additive on the thermophysical and rheological properties of halogen-free compositions for power cables with voltage 1 kV with the determination of both the temperatures of phase and structural transf

APA, Harvard, Vancouver, ISO, and other styles

41

Leal Lopes, Vitor Mainenti, Leonardo M. Honório, Murillo F. Santos, et al. "Design of an Over-Actuated Hexacopter Tilt-Rotor for Landing and Coupling in Power Transmission Lines." Drones 7, no. 6 (2023): 341. http://dx.doi.org/10.3390/drones7060341.

Full text

Abstract:

It is known that new power transmission line inspection techniques have been developed over the last few years with great potential to improve and, in some cases, even replace traditional inspection procedures such as using helicopters and cars. A series of Unmanned Aerial Vehicles (UAVs) such as fixed-wing or rotary-wing UAVs, and vehicles that climb on the power transmission line, promise to revolutionize the inspection market. In this light, at least 39 new research studies and/or products have been conducted and/or introduced to the market, respectively. However, in an incipient way, some

APA, Harvard, Vancouver, ISO, and other styles

42

Martin, Roli. "INTEGRATED MARKETING COMMUNICATION AND LOYALTY MODEL." International Journal of Islamic Business Ethics 2, no. 1 (2017): 245. http://dx.doi.org/10.30659/ijibe.2.1.245-261.

Full text

Abstract:

The rapid development of information technology and telecommunications companies to encourage dynamic can innovate and create high-tech products. One of emerging technology is currently the technology of fiber optic networks. Where using� a fiber optic network so speed in accessing the internet could be faster and more stable. With some excess owned, fiber optic network also has some disadvantages. Some disadvantages include fiber optic network cables that easily break up and also the cost of expensive treatments. Because of this technology using a cable, then the terms of the program become o

APA, Harvard, Vancouver, ISO, and other styles

43

Aminabhavi, Tejraj M., Patrick E. Cassidy, and Corley M. Thompson. "Electrical Resistivity of Carbon-Black-Loaded Rubbers." Rubber Chemistry and Technology 63, no. 3 (1990): 451–71. http://dx.doi.org/10.5254/1.3538265.

Full text

Abstract:

Abstract Uses are growing for rubbers with varying levels of resistivity. High electrical resistivity is very much essential in wire and cable insulation applications. Low levels of resistivity are needed for electrostatic discharge in phonograph records and many medical, industrial, and military products and for semiconductive cable compounds. The level of resistivity depends upon the number of contacts or near contacts between conductive particles in the rubber matrix. Loading level is obviously a major determinant in addition to physicochemical characteristics of the black. In the latter re

APA, Harvard, Vancouver, ISO, and other styles

44

Abdul Rahim, Mustaqqim, Abdul Naser Abdul Ghani, Muhammad Arkam Che Munaaim, Zuhayr Md Ghazaly, and Koay Jye Yueh. "Software Analysis of the Reinforced Concrete Beam with Additional Installation of Lightning Protection Cable." Materials Science Forum 904 (August 2017): 185–88. http://dx.doi.org/10.4028/www.scientific.net/msf.904.185.

Full text

Abstract:

Lightning protection system protects building structure from direct lightning impact. Embedding lightning protection cable inside concrete structure is widely use in practice now days. The objective of this research is to investigate the effect of installation of additional conductor cable inside concrete beam to its beam displacement and beam stress using finite element analysis software ABAQUS. The beam without additional conductor cable, with cable conductor installed at top and bottom reinforcement is modelled using ABAQUS. The results obtained from the three model is compared. As the resu

APA, Harvard, Vancouver, ISO, and other styles

45

He, Dajiang, Bohan Liu, Zhenwu Wang, You Shu, and Minghui Liu. "Study on Fault Optimization of Intermediate Joint of Power Cable." Journal of Physics: Conference Series 2260, no. 1 (2022): 012025. http://dx.doi.org/10.1088/1742-6596/2260/1/012025.

Full text

Abstract:

Abstract Cable joints are often prone to failure due to loose contact, small contact area and increased contact resistance, resulting in obvious heating. In the existing cable emergency repair work, the cable joints of the original section of the cable and the access end are made on site. Due to the long production time, the emergency repair speed is reduced. Therefore, this paper studies the connection mode of the new cable joint to make the contact between conductors more sufficient and the contact resistance smaller, and designs a scheme of three-phase cable plug-in intermediate joint with

APA, Harvard, Vancouver, ISO, and other styles

46

M., I. Baranov. "A CHOICE OF ACCEPTABLE SECTIONS OF ELECTRIC WIRES AND CABLES IN ON-BOARD CIRCUITS OF AIRCRAFT ELECTRICAL EQUIPMENT." Electrical engineering & electromechanics, no. 1 (February 19, 2020): 39–46. https://doi.org/10.20998/2074-272X.2020.1.06.

Full text

Abstract:

<strong><em>Purpose.</em></strong><em> Implementation of choice of maximum permissible sections S<sub>il</sub> of the uninsulated</em><strong> </strong><em>wires and insulated wires (cables) with copper (aluminum) cores (shells) in the on-board power circuits of electrical equipment of different aircrafts with AC current of frequency f>50 Hz. <strong>Methodology.</strong> Theoretical bases of the electrical engineering, electrophysics bases of technique of high voltage and high pulsed currents, applied thermal physics. <strong>Results.</strong> The enginee

APA, Harvard, Vancouver, ISO, and other styles

47

Zhang, Yuting, Fuhao Yu, Zhe Ma, et al. "Conductor Temperature Monitoring of High-Voltage Cables Based on Electromagnetic-Thermal Coupling Temperature Analysis." Energies 15, no. 2 (2022): 525. http://dx.doi.org/10.3390/en15020525.

Full text

Abstract:

As a key state parameter of high-voltage cables, conductor temperature is an essential determinant of the current carrying capacity of cables, but in practice, this is difficult to measure directly during the operation of high-voltage cables. In this paper, the electromagnetic-thermal coupling analysis model of a 110 kV high-voltage cable is established using the finite element analysis software COMSOL. By analyzing the temperature distribution law of high-voltage cables under different load currents and ambient temperatures, the relationship between the change in the high-voltage cable surfac

APA, Harvard, Vancouver, ISO, and other styles

48

Zhang, Zhen Peng, Shao Xin Meng, Jian Kang Zhao, and Wen Bin Rao. "Test Method for Verification Power Cable DTS System." Applied Mechanics and Materials 543-547 (March 2014): 621–24. http://dx.doi.org/10.4028/www.scientific.net/amm.543-547.621.

Full text

Abstract:

The verification test method on DTS system for power cable conductor-temperature calculation accuracy is described in this paper. The DTS temperature measure accuracy and positional accuracy are tests firstly. During the test a power cable laying in tunnel and applying different load currents ,the conductor-temperature measured value and the DTS system calculated value were compared. Testing process are employs the T-type thermocouple for conductor-temperature measure. DTS system calculates the conductor-temperature according to load current, over-sheath temperature etc. The difference between

APA, Harvard, Vancouver, ISO, and other styles

49

Luo, Chao, Zhitao Feng, Yihua Zhu, et al. "Temperature Estimation Method on Optic–Electric Composite Submarine Power Cable Based on Optical Fiber Distributed Sensing." Photonics 12, no. 6 (2025): 622. https://doi.org/10.3390/photonics12060622.

Full text

Abstract:

The status of an optic–electric composite high-voltage submarine cable (referred to as submarine cable) can be monitored based on optical fiber-distributed sensing technology, and at the same time, no additional sensor is needed in the monitoring system. Currently, this technology is widely used in submarine cable monitoring systems. To estimate the temperatures of conductor and XLPE (cross-linked polyethylene) insulation of the submarine cable based on the ambient temperature and optical fiber temperature, the thermoelectric coupling field model of the 110 kV single-core submarine cable is es

APA, Harvard, Vancouver, ISO, and other styles

50

Sutinah, Entin, and Nani Agustina. "Penerapan Algoritma Asosiasi dengan Metode Apriori Untuk Strategi Meningkatkan Hasil Penjualan Spare Part Motor." JURNAL MEDIA INFORMATIKA BUDIDARMA 6, no. 4 (2022): 2231. http://dx.doi.org/10.30865/mib.v6i4.4778.

Full text

Abstract:

Sales transactions in everyday life are very common, but in the sales business you must have a strategy to increase sales results optimally. This research was conducted on PD. Tri Jaya Motor, where this trading company is engaged in trading motorcycle spare parts for all types of motorcycles, both Honda, Yamaha, Kawasaki and so on. Currently PD. Tri Jaya Motor wants to make a strategy to increase sales results, but the problem is that PD. Tri Jaya Motor still doesn't get the right and effective way, one of which is in the preparation of goods that still don't have the right placement pattern,

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!