Log in

Relevant bibliographies by topics / Cable and wire products market / Journal articles

To see the other types of publications on this topic, follow the link: Cable and wire products market.

Journal articles on the topic 'Cable and wire products market'

Author: Grafiati

Published: 30 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Cable and wire products market.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Бойко, О. А., та С. Л. Панов. "Оборот контрафактной кабельно-проводной продукции: детерминанты и меры противодействия". СОВРЕМЕННОЕ ПРАВО, № 1 (9 січня 2019): 96–101. https://doi.org/10.25799/ni.2019.26..1..004.

Full text

Abstract:

Рассматриваются вопросы, связанные с наличием на отечественном потребительском рынке контрафактной, фальсифицированной и некачественной кабельно-проводной продукции. Анализируется современное состояние и тенденции оборота кабельно-проводных изделий; исследуются основные детерминанты, обусловливающие производство и реализацию кабельно-проводной продукции, изготовленной с нарушениями требований государственных стандартов, технических условий; предлагаются криминолого-виктимологические меры, направленные на сокращение на потребительском рынке количества контрафактной, фальсифицированной и некачес

APA, Harvard, Vancouver, ISO, and other styles

2

Гранкина, С. В., А. Р. Гиниатуллин, and Н. А. Крючкова. "Development of the global market for cable and wire products." Экономика и предпринимательство, no. 9(146) (January 22, 2023): 178–82. http://dx.doi.org/10.34925/eip.2022.146.9.032.

Full text

Abstract:

В статье рассмотрен мировой рынок кабельно-проводниковой продукции. Основное внимание уделено тенденциям рынка, факторам, стимулирующим и задерживающим развитие данного рынка, среди которых существенную роль играют развитие таких отраслей экономики, как строительство и телекоммуникации, а также пандемия, вызванная COVID 19. Выделены мировые лидеры по производству кабельно-проводниковой продукции, а также регионы, доля которых на мировом рынке значительна. The article considers the world market of cable and wire products. The main attention is paid to market trends, factors that stimulate and d

APA, Harvard, Vancouver, ISO, and other styles

3

Ivanchenko, Halyna, Iryna Semeniuk, and Bohdan Virtov. "PROSPECTS FOR UKRAINIAN PRODUCERS TO ENTER THE EU MARKET OF CABLE AND WIRE PRODUCTS." Economic scope, no. 194 (November 11, 2024): 164–69. http://dx.doi.org/10.30838/ep.194.164-169.

Full text

Abstract:

This article investigates the potential for Ukrainian cable and wire manufacturers to access the European Union market, where a growing demand for energy-efficient and sustainable solutions is driven by the rapid expansion of renewable energy sources and an accelerated pace of digitalization across industries. The research provides an analysis of the European cable and wire market's current state and development trends, identifying the primary drivers of growth, including the expansion of smart grids and renewable energy projects. Emphasis is placed on the competitive landscape, detailing key

APA, Harvard, Vancouver, ISO, and other styles

4

Kushnirenko, Оksana, та Oleksandr Deineko. "The adoption of the АСАА in the interests of Ukrainian producers and public safety". University Economic Bulletin, № 45 (27 травня 2020): 84–92. http://dx.doi.org/10.31470/2306-546x-2020-45-84-92.

Full text

Abstract:

Relevance of the research topic. Identification of the features of negative influence on the further development of Ukrainian production of cable and wire products, namely, the growth of imports of low-quality products and saturation of the market with counterfeit products, which leads to a decrease in production volumes, a reduction in productioncapacities, and profit losses for most Ukrainian manufacturers. In addition, the inefficiency of technical regulation programs leads to threats the security of the society: the use of counterfeit products is one of the causes of fires, which leads to

APA, Harvard, Vancouver, ISO, and other styles

5

Balabash, Olha, Inna Kuznetsova, Inna Levytska, Svitlana Zaika, and Tetyana Skrypko. "Strategic management of the enterprise: analysis of sectoral determinants." Independent Journal of Management & Production 13, no. 3 (2022): s196—s214. http://dx.doi.org/10.14807/ijmp.v13i3.1992.

Full text

Abstract:

The article proposes a methodology for determining and analyzing the determinant of the development of the industry, which makes it possible to formulate a list of applied recommendations for the formation of a strategy for the development of enterprises in the cable industry. The study uses a number of methods, the use of which allows us to explore the strategic prospects for the development of the industry, identify the determinants of development, evaluate them, and establish the nature of the impact on the activities of enterprises in the industry; highlight the structural and logical rela

APA, Harvard, Vancouver, ISO, and other styles

6

Bezprozvannych, G. V., M. V. Grynyshyna, and Y. S. Moskvitin. "Requirements for cables as categories of construction products and thermal resistance of power cables." Electrical Engineering & Electromechanics, no. 1 (January 1, 2024): 61–68. http://dx.doi.org/10.20998/2074-272x.2024.1.08.

Full text

Abstract:

Introduction. One of the main driving factors of the demand for cable and conductor products is the modern trend of urbanization, which leads to an increase in cities with significantly increased requirements for electrical networks of transportation and distribution of electrical energy. This requires the development of appropriate infrastructure with significant demand for electricity in the commercial, industrial and residential sectors. The construction industry uses a wide range of cables with an appropriate set of electrical and mechanical properties, resistance to the influence of exter

APA, Harvard, Vancouver, ISO, and other styles

7

Bezprozvannych, G. V., M. V. Grynyshyna, and Y. S. Moskvitin. "Requirements for cables as categories of construction products and thermal resistance of power cables." Electrical Engineering and Electromechanics 2024, no. 1 (2024): 61–68. https://doi.org/10.20998/2074-272X.2024.1.08.

Full text

Abstract:

<strong><em>Introduction</em></strong><em>. One of the main driving factors of the demand for cable and conductor products is the modern trend of urbanization, which leads to an increase in cities with significantly increased requirements for electrical networks of transportation and distribution of electrical energy. This requires the development of appropriate infrastructure with significant demand for electricity in the commercial, industrial and residential sectors. The construction industry uses a wide range of cables with an appropriate set of electrical and mechanical properties, resist

APA, Harvard, Vancouver, ISO, and other styles

8

Suparmono. "Determine competitiveness of Indonesian export commodities using static and dynamic revealed comparative analysis." Journal of Economic Info 8, no. 2 (2021): 88–100. http://dx.doi.org/10.31580/jei.v8i2.1833.

Full text

Abstract:

The government continues to promote non-oil and gas exports because oil and gas exports have continued to decline since the decades of the 90s. Main commodity products are still dominated by primary products such as mining, agriculture and some low technology manufactured products. This results in low added value of the product. Indonesia needs products that are highly competitive in the international market. This article aims to analyze the level of competitiveness of Indonesian products in world trade. The analytical tool used is the static revealed comparative advantage (SRCA) and dynamic r

APA, Harvard, Vancouver, ISO, and other styles

9

Srinivasan, R. "Suprajit Engineering Limited." Asian Journal of Management Cases 10, no. 1 (2013): 77–95. http://dx.doi.org/10.1177/0972820112471260.

Full text

Abstract:

Suprajit Engineering Limited (SEL) was set up by Mr Ajith Kumar Rai, who serves as its Managing Director, when he returned as a fresh graduate from Canada. Foreseeing a boom in the country’s automobile market, Ajith decided to establish an automotive cable-manufacturing unit. His clarity of vision convinced TVS Motors to invest in setting up Suprajit Engineering as a small, one-unit firm in Bangalore, a fast-growing Indian metro. Beginning in 1987 as a small-scale automotive cable manufacturer, Suprajit is now a public listed company, with some of the world’s biggest automobile companies as cl

APA, Harvard, Vancouver, ISO, and other styles

10

Eiras, Eduardo, Francisco J. G. Silva, Raul D. S. G. Campilho, Rita C. M. Sales-Contini, André F. V. Pedroso, and Naiara P. V. Sebbe. "A Novel Fully Automatic Concept to Produce First Subset of Bowden Cables, Improving Productivity, Flexibility, and Safety." Machines 11, no. 11 (2023): 992. http://dx.doi.org/10.3390/machines11110992.

Full text

Abstract:

With a view to maintaining the competitiveness required by the market, the automotive industry strongly encourages its suppliers to develop new production methods and technologies capable of reducing the costs of produced products, ensuring the necessary quality, and increasing flexibility, with a view to responding more easily to the customization of the products that the market increasingly demands. The main goal of this work was to increase the flexibility and productivity of equipment capable of producing the first subset that constitutes the product commonly known as the Bowden cable. To

APA, Harvard, Vancouver, ISO, and other styles

11

Pohmer, K. "Oil Bleeding Behaviour of Self-Lubricating Liquid Silicone Rubbers." International Polymer Science and Technology 28, no. 2 (2001): 6–8. http://dx.doi.org/10.1177/0307174x0102800202.

Full text

Abstract:

The term liquid silicone rubber (LSR) covers a whole range of two-pack, heat-curing products, which may be processed using liquid injection moulding (LIM), a technique similar to thermoplastic injection moulding. Although this product group only accounts for about one thousandth of the world rubber market (corresponding to approximately 18 000 t/a) and is therefore a speciality rubber (ref. 1), due to their excellent properties, such as thermal stability, low-temperature flexibility, constantly good mechanical properties over a wide temperature range and good physiological compatibility to nam

APA, Harvard, Vancouver, ISO, and other styles

12

Hałys, Piotr, and Piotr Kowalczyk. "Military technology in mine rescue." Scientific Journal of the Military University of Land Forces 199, no. 1 (2021): 178–97. http://dx.doi.org/10.5604/01.3001.0014.8119.

Full text

Abstract:

The sense of security is an individual’s one-sided personal expression referring to one’s awareness of existing threats and potential possibilities of their prevention. Thus we can observe a permanent development of technologies developed to meet the needs of military operations aimed at neutralizing threats related to explosives of military origin, as well as any improvised explosive devices. Threats are the events that adversely affect life, health, property or the environment, therefore, the mentioned technologies can be used in the civilian market as well. This article presents military sy

APA, Harvard, Vancouver, ISO, and other styles

13

Zhao, Jintao, Wenlei Sun, Cheng Lu, Xuedong Zhang, Lixin Wang, and Dajiang Wang. "Wire and Cable Quality Traceability System Based on Industrial Internet of Things and Blockchain." Applied Sciences 14, no. 2 (2024): 943. http://dx.doi.org/10.3390/app14020943.

Full text

Abstract:

Wire and cable are important industrial products involving the national economy and people’s livelihood, which are hailed as the “blood vessel” and “nerve” of the national economy, providing the basic guarantee for the normal operation of modern economy and society. The data traceability of their production and circulation process is a key factor in ensuring their quality and safety management. We aim to solve the problems of unsafe data transmission, weak quality control, and information islands in the process of wire and cable quality traceability in order to improve the production managemen

APA, Harvard, Vancouver, ISO, and other styles

14

Toirov, Olimjon, Vera Ivanova, Viktoriya Tsypkina, Dilnoza Jumaeva, and Dilnoza Abdullaeva. "Improvement of the multifilament wire lager for cable production." E3S Web of Conferences 411 (2023): 01041. http://dx.doi.org/10.1051/e3sconf/202341101041.

Full text

Abstract:

The article discusses a possible way to solve the urgent problem of cable production - increasing the efficiency of the technological process by modernizing the control system of technological equipment by developing an intelligent system that allows to improve the reliability of the technology as a whole. The stranding equipment for the implementation of the stranding technology has been chosen as the object of the study, namely, a multifilament wire lager. This equipment is used in the production process of manufacturing cable and wire products, in particular the production of cable semi-fin

APA, Harvard, Vancouver, ISO, and other styles

15

Васильев, Е. Б. "FACT AND FABLE ABOUT COUNTERFEIT IN THE CABLE INDUSTRY OF RUSSIA." Кабели и провода, no. 3(407) (June 27, 2024): 30–34. http://dx.doi.org/10.62994/2072-215x.2024.31.54.004.

Full text

Abstract:

Статья посвящена анализу всех групп кабелей и проводов с целью выяснения, какой объём фальсификата присутствует в общем объёме производства, и какие группы кабельно-проводниковой продукции наиболее подвержены наличию в них некачественной продукции. Сделана попытка определить причины возникновения и наличия фальсификата, а также предложены меры по его устранению. The article concentrates on the analysis of all groups of cable and wire in order to find out the amount of counterfeit products in the total volume of production and to clear up which groups of cable and wire are most susceptible to t

APA, Harvard, Vancouver, ISO, and other styles

16

Ivanova, Vera, and Victoria Tsypkina. "Cable technology as a complex, multicomponent intelligent system providing high accuracy, reliability and safety." E3S Web of Conferences 461 (2023): 01039. http://dx.doi.org/10.1051/e3sconf/202346101039.

Full text

Abstract:

Cable production consists of complex technological processes focused on the production of cable products with high operational reliability and fire safety. The article analyzes the main problematic issues that arise in the development of intelligent systems focused on information processing with advanced management functions, especially in the conditions of emerging technological uncertainties associated with the use of various production technologies. The classification of technological uncertainties of cable production is given and recommendations are developed for the selection of complex c

APA, Harvard, Vancouver, ISO, and other styles

17

Yang, Runxian, Jie Zhou, Tao Tao, Lianghao Hua, and Jianfeng Zhang. "Design and Implementation of Spring Cable Shaping Method Based on Fuzzy Control." Applied Sciences 12, no. 1 (2021): 245. http://dx.doi.org/10.3390/app12010245.

Full text

Abstract:

In order to improve the production efficiency and elastic quality of spring cable, and meet the market demand of automatic mass production, based on the market research and experimental analysis of common spring cable shaping methods, a rapid shaping method of coil bar current heating spring cable is innovatively proposed. After the spring cable is wound on the coil bar once, the coil bar is directly heated to realize the spring wire temperature rising and setting. The process temperature is input from the man-machine interface, and the temperature control is based on a fuzzy algorithm, which

APA, Harvard, Vancouver, ISO, and other styles

18

Sun, Gang, Ping Jun Xia, Yuan Li, Wang Min Yi, and Lei Huang. "A Haptic-Based Approach for Cable Design and Routing in Industrial Complex Products." Advanced Materials Research 139-141 (October 2010): 1356–60. http://dx.doi.org/10.4028/www.scientific.net/amr.139-141.1356.

Full text

Abstract:

Cable design and routing is a time-consuming and costly process for industrial complex products, traditionally it is finished by experienced engineers through soft lead or aluminum wire fitting in physical models, or by automatic or semi-automatic computing method in CAD system, but both with little success. In this paper, a new haptic-based interactive method is proposed. After rigid product models are loaded from CAD system, a geometry modeling method is used to represent cable shape, a physics modeling method for calculating cable deformation, and a haptic modeling method for interaction an

APA, Harvard, Vancouver, ISO, and other styles

19

Tsypkina, V. V., V. P. Ivanova, D. N. Isamukhamedov, A. U. Turabekov, and R. F. Atamukhamedova. "Development of generalized requirements for automated electric drive of cable equipment." E3S Web of Conferences 401 (2023): 02045. http://dx.doi.org/10.1051/e3sconf/202340102045.

Full text

Abstract:

The article deals with the production of cable and wire products and the operation of cable processing equipment. The technological parameters of cable machines are analyzed by maintaining the range established by the regulatory documentation, and the main task of ensuring the efficiency of the technology is formulated. The requirements for automated electric drive of cable equipment are analyzed, considering the harsh modern operating conditions of cable products. The work of modern cable equipment with a high level of automation of the technological process and existing cable machines with a

APA, Harvard, Vancouver, ISO, and other styles

20

Smyrak, B., B. Leszczynska Madej, P. Jalowy, M. Nowak, and P. Kozak. "COMPARATIVE STUDIES OF THE SUSCEPTIBILITY OF COPPER AND ALUMINUM TO PROCESSING IN WIRE DRAWING PROCESS." International Journal of Advanced Research 9, no. 09 (2021): 338–44. http://dx.doi.org/10.21474/ijar01/13416.

Full text

Abstract:

Modern technological solutions in electrical applications require, above all, high energy efficiency. This means that in such applications, materials with the highest possible electrical conductivity should be used for conductive elements. Of all metals, copper is the natural choice. Copper cables or wires used in electrical networks and installations provide better electrical and thermal conductivity and guarantee reliability - which translates into the quality of electricity. And bad quality of energy means tangible financial losses. On the other hand, apart from physical properties, an impo

APA, Harvard, Vancouver, ISO, and other styles

21

Navas-Reascos, Gabriel E., David Romero, Ciro A. Rodriguez, Federico Guedea, and Johan Stahre. "Wire Harness Assembly Process Supported by a Collaborative Robot: A Case Study Focus on Ergonomics." Robotics 11, no. 6 (2022): 131. http://dx.doi.org/10.3390/robotics11060131.

Full text

Abstract:

Products and assets are becoming increasingly “smart”, e.g., mechatronic, electronic, or cyber-physical. In the lack of fully reliable wireless solutions, extensive wiring and wire bundling into wire harnesses are needed. This has manufacturing implications, leading to increasingly complex wire harness assembly processes, where numerous components, connectors, and cables are assembled, connecting critical and non-critical electric and electronic systems in smart products and assets. Thus, wire harnesses demand is rapidly rising in most industries, requiring human or robotic work. Often, requir

APA, Harvard, Vancouver, ISO, and other styles

22

Peter, Ogundola Ilesanmi, and Aderotimi Oluwasesan Adeoti. "Evaluation of Total Quality Management Practices on Organizational Performance of Wires and Cables Manufacturing Industries in Ondo State, Nigeria." Journal of Engineering Research and Reports 25, no. 8 (2023): 9–19. http://dx.doi.org/10.9734/jerr/2023/v25i8954.

Full text

Abstract:

This research focused on the evaluation of total quality management on the organizational performance of Ondo state wire and cable manufacturing Industries. A case study of Denki Wire and Cable Nigeria Limited, Akure, Ondo State. The issue of poor quality of products is a major problem in the wire and cable manufacturing industries in Nigeria which can be averted by genuine quality management for enhancing product quality. The study aimed to evaluate the extent to which the principles of total quality management implemented and the impact of total quality management principles on organizationa

APA, Harvard, Vancouver, ISO, and other styles

23

Gonzalez, Gilbert. "DIVIDE OR CONVERGE?" Muma Case Review 1 (2016): 1–23. http://dx.doi.org/10.28945/3581.

Full text

Abstract:

Gilbert Gonzalez, founder and CEO of Mission Critical Solutions (MCS), was reflecting on the path forward for his company. MCS maintained and updated a five-year strategic plan each year since its inception in 1990. In the early years, the strategic plan focused on the key strategic factors (KSFs) and resulted in a narrow mission. Year after year, that focus on the KSFs was rewarded by the market. Doing the most important things well kept the organization focused and efficient. The consistently evolving mission of the organization necessitated adding new products, services, and solutions. In t

APA, Harvard, Vancouver, ISO, and other styles

24

Pane, Muhammad Akbar Syahbana, Khairul Saleh, Andi Prayogi, Rahmad Dian, Ratu Mutiara Siregar, and Raden Aris Sugianto. "Low-Cost CCTV for Home Security With Face Detection Base on IoT." Journal of Information Systems and Technology Research 3, no. 1 (2024): 20–29. http://dx.doi.org/10.55537/jistr.v3i1.769.

Full text

Abstract:

Monitoring is a necessary part of Home surveillance that can be done through the internet network as a security measure. Many CCTV cameras on the market today continue to employ analog and conventional technology, specifically coaxial wire. As a result, extra expenditures for CCTV system wiring are required; besides being more expensive, the installation takes more handling, as the picture data cable and control signal cable cannot be merged. This project aims to develop a security system capable of detecting object movement in real-time utilizing a webcam camera attached to a raspberry pi. Th

APA, Harvard, Vancouver, ISO, and other styles

25

ГРАНКИНА, С. В., та А. Р. ГИНИАТУЛЛИН. "АНАЛИЗ РАЗВИТИЯ РОССИЙСКОГО РЫНКА КАБЕЛЬНОЙ ПРОДУКЦИИ В УСЛОВИЯХ ЦИФРОВИЗАЦИИ". Экономика и предпринимательство, № 9(170) (13 вересня 2024): 401–4. http://dx.doi.org/10.34925/eip.2024.170.9.070.

Full text

Abstract:

В статье представлен анализ российского рынка кабельной продукции, которая относится к электротехнической промышленности, обеспечивающих, в том числе, цифровизацию процессов и производств. Производство электротехнической продукции демонстрировало рост до 2020 года, однако, совокупность внутренних и внешних факторов обусловила его падение. В современных условиях отсутствия импортных поставок отечественные предприятия наладили выпуск отдельных видов кабельной продукции, что обеспечило незначительный рост дынного рынка. The article presents an analysis of the Russian market for cable products, wh

APA, Harvard, Vancouver, ISO, and other styles

26

Suparmin and Yuliarman Saragih. "Line Balancing Method As An Effort To Improve Cable Production In Pt Kmi Wire And Cable Production Management." International Journal of Science, Technology & Management 4, no. 2 (2023): 393–400. http://dx.doi.org/10.46729/ijstm.v4i2.754.

Full text

Abstract:

Write Line Inner Sheating at PT. KMI Wire and Cable has idle time due to processing time on Unbalanced work stations sometimes cause stop lines. Fromcalculations it is known that the cycle time gap / cycle time obtained is as big as 109.2 seconds and the figure is taken based on the biggest time from 6 stations existing work. The author intends to examine the causes of its occurrence processing time delays that occur on the Inner Sheating line and deliver give suggestions for future improvements. This research uses line balancing method and production system layouts. Among them is looking for

APA, Harvard, Vancouver, ISO, and other styles

27

Isamukhamedov, Dilshod Nigmatullaevich, Daniyar Bakhtiyarovich Madrahimov, Rano Fazildzhanovna Atamukhamedova, and Nigora Jakhongirovna Tairova. "Issues of improving quality of contact wire." E3S Web of Conferences 216 (2020): 01154. http://dx.doi.org/10.1051/e3sconf/202021601154.

Full text

Abstract:

The article deals with the issues of improving the reliability of cable operation and conductor products, due to its quality improvement. Research work was carried out on the example of a МF-100-grade contact wire, which is used in the operation of electrified railway and urban transport in the Republic of Uzbekistan and in other countries. The solution of the issue of improving reliability in the operation of the above-mentioned wire is reduced to improving the manufacturing technology, as well as making changes to the method of calculating the drawing route. The result of the work is the imp

APA, Harvard, Vancouver, ISO, and other styles

28

Tsypkina, V. V., V. P. Ivanova, and K. K. Jurayeva. "Cable conductor of cabling and wiring products based on composite materials for transport systems." E3S Web of Conferences 401 (2023): 03036. http://dx.doi.org/10.1051/e3sconf/202340103036.

Full text

Abstract:

The article deals with the issues of working out the technology of manufacturing cabling and wiring products that are used in railway transport systems. A cable conductor for a cable product, made on the basis of composite materials, was adopted as the object of research. The technology of production of composite billets and wire for cable products for subsequent drawing, as well as ways of obtaining them, is covered in detail. Special attention is paid to the problems of operation in railway transport, power transmission systems, which confirms the relevance of the research. The increase in t

APA, Harvard, Vancouver, ISO, and other styles

29

Tsypkina, Victoria, Vera Ivanova, and Kamila Jurayeva. "MATHEMATICAL MODELING OF THE CONVEYOR MOVEMENT FOR THE CABLE WASTE CRUSHING LINE." Вестник КазАТК 122, no. 3 (2022): 255–61. http://dx.doi.org/10.52167/1609-1817-2022-122-3-255-261.

Full text

Abstract:

The article deals with the issues of mathematical modeling of the conveyor movement that operates as part of a waste crushing line intended for the cable and wire products. The ways of increasing the efficiency of the conveyor, having an unstable nature of the load of the moving conveyer belt, are analyzed. It is determined that the reduction of dynamic loads during the start-up of the electromechanical conveyor system is very relevant. The solution to this issue is possible by controlling the speed parameters of the belt movement and changing dynamic loads with uneven flow of the fragmented m

APA, Harvard, Vancouver, ISO, and other styles

30

Chang, Pu, Mei Fang Lu, and Jim Jui Min Lin. "Greenhouse Gas Emission Factor of Scrapped Cable and Wire Recycling Factories." Advanced Materials Research 838-841 (November 2013): 2811–17. http://dx.doi.org/10.4028/www.scientific.net/amr.838-841.2811.

Full text

Abstract:

Carbon footprint of three scrapped cable and wire recycling processing plants was analyzed by examining the annual carbon emission and trend for 2009-2011. Among the six greenhouse gases (CO2, CH4, N2O, SF6, HFCs, and PFCs), the annual emission of CO2 was the highest (>95%), while remaining gases only accounted for less than 5% of the total greenhouse gas emission. When analyzing the collected data based on different frontier categories, Category II (greenhouse gas emission indirect caused by electricity consumption) had the highest emission proportion (>57%). It is because the machines

APA, Harvard, Vancouver, ISO, and other styles

31

Karasyov, Miroslav, and Tatiana Mihalenko. "TECHNOLOGY OPTIMIZATION OF WIRE DRAWING WITH NON-STANDARD SECTION IN MANUFACTURING OF CABLE AND WIRE PRODUCTS (USING THE EXAMPLE OF SENILEK WIRES)." Transport engineering 2024, no. 1 (2024): 27–35. http://dx.doi.org/10.30987/2782-5957-2024-1-27-35.

Full text

Abstract:

The current state of cable and wire production is analysed. Special attention is paid to the technology of drawing wire of non-standard cross-section, which is used in overhead power lines wires. The paper contains a proposal to optimize the technology of drawing wire of non-standard cross-section using the example of popular SENILEK wires. A new approach and methods for solving the optimization problem using modern CAD are considered, appropriate calculations are given and graphical results on the proposed technology are presented. Based on the results of the paper, it is concluded that in th

APA, Harvard, Vancouver, ISO, and other styles

32

Chen, Dong Dong, Hai Peng Pan, Min Ming Gu, and Le Wang. "Design of Wireless Cage Culture Monitoring System Based on Remote Programme Update." Applied Mechanics and Materials 577 (July 2014): 655–58. http://dx.doi.org/10.4028/www.scientific.net/amm.577.655.

Full text

Abstract:

Cage culture is one of the major forms of aquaculture now. For ensuring the product quality, it is necessary that the status of water environment is estimated. Aiming at the issues of high cost and the difficulty of arrangement cables, intelligent remote monitoring system based on wireless communication technology is developing, and wireless remote program update technology is brought in for adapting to different aquatic products. The system has advantage of wiring easily and networking conveniently, and has wide market prospects.

APA, Harvard, Vancouver, ISO, and other styles

33

Crockett, William G. "Critical Barriers Associated with Copper Wire." International Symposium on Microelectronics 2015, no. 1 (2015): 000394–98. http://dx.doi.org/10.4071/isom-2015-wp31.

Full text

Abstract:

Since around 2008, the shift from Gold (Au) bonding wire to Copper (Cu) bonding wire has been taking place, full scale, with the aim of reducing costs. When compared with Au, Cu wire presents challenges in reliability and repeatable bonding characteristics in terms of chemical stability, which is required in high reliability applications. Therefore Cu wire adoption in automotive and industrial semiconductors has been limited. Conventionally the market for Cu bonding wires has been divided into two types: bare Cu wires (high purity) and Palladium coated copper (PCC) bonding wires. These wires h

APA, Harvard, Vancouver, ISO, and other styles

34

Tsypkina, V. V., and V. P. Ivanova. "Ensuring the reliability of the technological equipment of the cable company through the use of renewable energy sources." E3S Web of Conferences 384 (2023): 01007. http://dx.doi.org/10.1051/e3sconf/202338401007.

Full text

Abstract:

To date, a "green" transformation of the industry is being carried out in the global energy sector, which will inevitably affect the decline in the level of consumption of natural energy resources, as well as the accompanying high financial and technological risks. The article discusses the issues of accelerating the possible energy transfer, in relation to enterprises producing cable and wire products. The analysis of possible methods and technologies that are aimed at making the transition and increasing the energy efficiency of cable machines is carried out. Improving the efficiency of tech

APA, Harvard, Vancouver, ISO, and other styles

35

Yao, Guowen, Xuanbo He, Jiawei Liu, Zengwei Guo, and Pengyu Chen. "Test Study of the Bridge Cable Corrosion Protection Mechanism Based on Impressed Current Cathodic Protection." Lubricants 11, no. 1 (2023): 30. http://dx.doi.org/10.3390/lubricants11010030.

Full text

Abstract:

The cable system is an important bearing element of a bridge with stay cables or slings and a matter of major concern in the safety of the bridge structure. Bridge cables are vulnerable to corrosion induced by leakage and soaking during their service life. To solve this problem, and based on the idea of proactive control by means of the impressed current cathodic protection (ICCP) of bridge cables, this study designs and develops an ICCP system device for bridge cable protection. In this study, an accelerated corrosion test was conducted to test the ICCP system of steel wires inside the cables

APA, Harvard, Vancouver, ISO, and other styles

36

Pustovoit, Oleh. "ASSESSING EXPORT COMPETITIVENESS IN THE CONTEXT OF GROWTH IN EMERGING ECONOMIES. THE EXAMPLE OF UKRAINE." Economics & Education 6, no. 3 (2021): 23–29. http://dx.doi.org/10.30525/2500-946x/2021-3-3.

Full text

Abstract:

The purpose of this article is to clarify the content of the concept of "competitiveness", to develop and test approaches to assess the importance of basic, price and non-price competitiveness of commodity exports to ensure its dynamics on the example of Ukraine. Methodology. The article proposes to expand the content of the concept of "competitiveness" by generalizing the level of compliance of goods (services) with consumer preferences of market participants. This conceptual position is used to enhance the understanding of basic, non-price and price competitiveness of products and to clarify

APA, Harvard, Vancouver, ISO, and other styles

37

Yudina, E. "The Program of Import Substitution in the Cable Industry." Bulletin of Science and Practice 6, no. 3 (2020): 304–7. http://dx.doi.org/10.33619/2414-2948/52/37.

Full text

Abstract:

The state’s desire in recent years to carry out activities to oust the Russian market of imported goods and various materials and equipment is a positive sign and significant step in the direction of transition of the Russian economy from commodity–monetary to real, based on deep processing of raw materials, but also restore previously lost technologies and the formation of new products and development on the basis of existing scientific and technical potential. Undoubtedly, this is of particular importance, especially in the military-industrial complex-not to be dependent on foreign component

APA, Harvard, Vancouver, ISO, and other styles

38

Wang, Wei, Fan Yang, Yunlai Lu, et al. "Application of Magnesium Hydroxide/Diphenoxy Phosphate in Silicone Rubber Flame Retardant Cable Material." Coatings 13, no. 5 (2023): 934. http://dx.doi.org/10.3390/coatings13050934.

Full text

Abstract:

Deketoxime–type room–temperature vulcanized silicone rubber cable materials were prepared using α, ω–dihydroxy polydimethylsiloxane, carbon black, calcium carbonate, magnesium hydroxide, piperazine bis (diphenoxy phosphate) salt (PBDP), and melamine diphenoxy phosphate (MDP). The effects of carbon black and flame retardants on the mechanical properties, flame–retardant properties, and electrical insulation properties of silicone cable coatings were investigated. The research results showed that the products obtained had good mechanical and electrical insulation properties, with tensile strengt

APA, Harvard, Vancouver, ISO, and other styles

39

Grzebinoga, Justyna, Andrzej Mamala, Wojciech Ściężor, and Radosław Kowal. "Research on New Al-Ag-Mo Alloys Dedicated to Wire Applications in Overhead Power Lines." Journal of Casting & Materials Engineering 7, no. 1 (2023): 9–14. http://dx.doi.org/10.7494/jcme.2023.7.1.9.

Full text

Abstract:

The latest research work in the field of electric power systems focuses on the development of new wire materials which will allow the increase of the transmission capacity of power lines currently in use. The reason for this research was the often limited possibilities of continuous and failure-free transmission of electricity. In this paper, the authors present research on a new aluminium-based alloy dedicated for use as a conductive braid in the HTLS cable group. There are many technical solutions for this group of cables on the market, although they are solutions with a number of disadvanta

APA, Harvard, Vancouver, ISO, and other styles

40

Miller, D. "THE USE OF A PIPE CUTTER AS AN INSTRUMENT OF CRIMINAL OFFENSE AT THE TIME OF THEFT OF CABLE AND WIRING PRODUCTS: FEATURES OF IDENTIFICATION RESEARCH." Criminalistics and Forensics, no. 66 (2021): 983–90. http://dx.doi.org/10.33994/kndise.2020.66.73.

Full text

Abstract:

The article deals with a widespread modern device for plumbing work - a pipe cutter for polypropylene pipes, as an adapted instrument of crime in theft of cable and wire products, primarily a telephone cable. The main attention is focused on the following aspects of the problem: design features of a pipe cutter with a ratchet mechanism, in the context of solving identification issues; systematization of traces that the pipe cutter leaves on the surfaces of the constituent elements of the telephone cable; problematic in the study of cut traces on a telephone cable. The structure of the pipe cut

APA, Harvard, Vancouver, ISO, and other styles

41

Suparmono, Suparmono, Edi Suandana, and Fauzan Ilmas. "Determining Competitiveness of Indonesian Export Commodities using Revealed Comparative Analysis." Jurnal Ekonomi & Studi Pembangunan 23, no. 1 (2022): 66–80. http://dx.doi.org/10.18196/jesp.v23i1.13557.

Full text

Abstract:

This article aims to analyze Indonesian products’ competitiveness in the global market using the static revealed comparative advantage (SRCA) and the dynamic revealed comparative advantage (DRCA). DRCA is considered superior to RCA because it takes into account the time element. The current research combines DRCA and RCA to provide an analytical comparison. The data were collected from the International Trade Centre, classified according to the Harmonized System (HS) from 2013 to 2019. Using SRCA, Indonesia’s tin and articles’ competitiveness only contributes 0.95% of Indonesia's total exports

APA, Harvard, Vancouver, ISO, and other styles

42

O, Velichko, Bezshkurenko O, Stovpchenko G, et al. "Problematic issues of high-carbon electrical steel production." Theory and practice of metallurgy, no. 5, 2021 (September 1, 2021): 20–33. http://dx.doi.org/10.34185/tpm.5.2021.03.

Full text

Abstract:

Currently, wire rod for the production of wire from low-, medium- and high-carbon unalloyed and alloyed steels for springs, ropes, metal cord, welding electrodes and copper-plated wire for welding building structures, ship hulls, large-diameter pipes and main gas and oil pipelines is in demand on the world market. for the production of which it is not necessary to carry out softening annealing before drawing the wire rod or on an intermediate size of wire. The most responsible types of wire rod made of high carbon steel are wire rod, intended for the production of metal cord and high-strength

APA, Harvard, Vancouver, ISO, and other styles

43

Kaczorek-Chrobak, Katarzyna, and Jadwiga Fangrat. "PVC-Based Copper Electric Wires under Various Fire Conditions: Toxicity of Fire Effluents." Materials 13, no. 5 (2020): 1111. http://dx.doi.org/10.3390/ma13051111.

Full text

Abstract:

Ventilation-controlled fires tend to be the worst for toxicity, because they produce large amounts of fire effluent containing high yields of toxic products. In order to examine the dependence of the amount of chosen few main combustion gases under ventilation-controlled conditions, a PVC-insulated copper electric wire with unknown composition (PVC filled with chalk) was studied by mean of a steady state tube furnace. For the tested wire, lower values of CO2 yields at different ventilation conditions were obtained than for the reference pure polymer unplasticized PVC and additionally tested pu

APA, Harvard, Vancouver, ISO, and other styles

44

Diatlov, Ilia, and Natalia Trufanova. "POWER CABLE INSULATION PRODUCTION LINE CONTROL." Applied Mathematics and Control Sciences, no. 3 (November 10, 2021): 81–94. http://dx.doi.org/10.15593/2499-9873/2021.3.04.

Full text

Abstract:

The paper considers the problem of control the cable insulation continuous vulcanization line. The axisymmetric mathematical model of the power cable rubber insulation vulcanization technological process has been developed. The model describes the heat transfer process inside the vulcanization pipe and the vulcanization process kinetics inside the insulation. The mathematical model is based on the energy conservation equation and it is presented in the form of a differential equations system closed by boundary conditions The mathematical model makes it possible to estimate the influence of var

APA, Harvard, Vancouver, ISO, and other styles

45

Tsypkina, Victoria, Vera Ivanova, and Kamila Jurayeva. "DEVELOPMENT OF A MATHEMATICAL MODEL OF THE "SHROEDER-TRANSPORTER" SYSTEM IN THE TECHNOLOGY OF PROCESSING CABLE WASTE." International Journal of Advanced Logistics, Transport and Engineering 2, no. 2 (2022): 26–34. http://dx.doi.org/10.52167/2790-5829-2022-2-2-26-34.

Full text

Abstract:

The article deals with the development of a mathematical model of the "Schroeder - Transporter" system, which is the main part of the technological process of processing waste cable and wire products. The task of increasing the efficiency of the cable waste recycling process is solved by optimizing the operation of all electromechanical systems: crushers, shredders, granulators and their connecting elements - conveyors. The very process of moving crushed cable production waste has an unstable nature of the load of the moving web, and the reduction of dynamic loads during the start-up of the el

APA, Harvard, Vancouver, ISO, and other styles

46

Koshel, Oleksandr. "EXAMINATION OF COUNTERFEIT CONDUCTORS WITH SIGNS OF A SHORT CIRCUIT." Criminalistics and Forensics, no. 67 (August 9, 2022): 410–16. http://dx.doi.org/10.33994/kndise.2022.67.41.

Full text

Abstract:

The article reviews an expert study of conductors with melting due to a short circuit from the places of fires. Given the urgency of the problem of low-quality conductors on sale, the issue of studying such objects is considered. The use of counterfeit cable and wire products leads to fires, resulting in both material losses and deaths, while the number of fires caused by low-quality products is increasing. For the most used copper wires, the electrical properties are determined by the presence of impurities, some of which have a significant effect on electrical resistance. The technical stand

APA, Harvard, Vancouver, ISO, and other styles

47

Supandi, Endang, and Putu Sugiartawan. "Prediksi Penjualan Produk Menggunakan Data Mining Dengan Metode K-Nearest Neighbor Pada PT. Terang Abadi Raya." Jurnal Sistem Informasi dan Komputer Terapan Indonesia (JSIKTI) 4, no. 3 (2022): 165–76. https://doi.org/10.33173/jsikti.153.

Full text

Abstract:

Terang Abadi Raya is a lighting and cable distributor company that has various types of goods, with the many types of products to be sold the company has difficulty in determining which products are the most sold in the market. This makes it difficult for the marketing department to offer products to be sold. PT. Terang Abadi Raya has various types of products based on sales data for the last 5 years, using the K-Nearest Neighbor prediction can make it easier for companies to plan sales. To find out the best-selling sales using the maining data classification and the K-Nearest Neighbor method.

APA, Harvard, Vancouver, ISO, and other styles

48

Golubchik, Eduard, Marina Polyakova, and Alexandr Gulin. "Adaptive Approach to Quality Management in Combined Methods of Materials Processing." Applied Mechanics and Materials 656 (October 2014): 497–506. http://dx.doi.org/10.4028/www.scientific.net/amm.656.497.

Full text

Abstract:

One of the requirements of the modern materials market is the stable balance between the manufacturer and customer interests. However in order to improve the competitive edge the manufacturer should be able to adapt well to the changing market conditions. This feature is especially important when the manufacturer only starts producing the products with improved consumer properties. The article is concerned with the concept of real-time technological adjustment of quality ratings to external impact and the development of the new combined method of carbon wire plastic deformation resulting in im

APA, Harvard, Vancouver, ISO, and other styles

49

Xia, Ximing, Naifa Hu, Jinhui Liu, Guijiang Chen, Qinghan Yang, and Yuyi Chen. "Development and Innovative Design Research of Underwater Bionic Fish Products under Hybrid Propulsion Technology." Wireless Communications and Mobile Computing 2021 (November 29, 2021): 1–11. http://dx.doi.org/10.1155/2021/5146992.

Full text

Abstract:

For a long time, underwater robot has been used as a scientific research tool and a teaching platform, but the real application products have not been well explored. The successful case of UAV gives underwater robot a higher expectation. How to apply underwater robot and enter the market has become a hot spot of underwater robot research at present. This paper mainly introduces a bionic fish-shaped robot, redefines underwater robot with innovative thinking, determines product functions from the perspective of the market, and develops product functions and designs and realizes the structure of

APA, Harvard, Vancouver, ISO, and other styles

50

Golik, O. V. "STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS." Electrical Engineering & Electromechanics, no. 5 (October 31, 2016): 47. http://dx.doi.org/10.20998/2074-272x.2016.5.07.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!