Log in

Relevant bibliographies by topics / Cable terminations

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Cable terminations'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cable terminations.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cable terminations"

1

Jeon, Bub-Gyu, Sung-Jin Chang, Sung-Wan Kim, Dong-Uk Park, and Nakhyun Chun. "Experimental Study on the Acceleration Amplification Ratio of Cable Terminations for Electric Power Facilities." Energies 17, no. 22 (2024): 5641. http://dx.doi.org/10.3390/en17225641.

Full text

Abstract:

Among national infrastructure facilities, electric power facilities are very important sites that must maintain their functions properly even during a natural disaster or during social crises. Therefore, seismic design is required when necessary for major electric power facilities that have a significant impact when damaged in the event of an earthquake. In electric power facilities, bushings are generally installed in devices or structures. Therefore, ground acceleration can be amplified through devices, such as transformers, or sub-structures. Among various electric power facilities, cable t

APA, Harvard, Vancouver, ISO, and other styles

2

Uydur, Cihat Cagdas, та Oktay Arikan. "Use of Tanδ and Partial Discharge for Evaluating the Cable Termination Assembly". Energies 13, № 20 (2020): 5299. http://dx.doi.org/10.3390/en13205299.

Full text

Abstract:

It is known that the failure of cable terminations causes power outages and impairs system quality and continuity. Besides, serious economic losses on both the distribution and consumer sides occur. In this study, the dielectric behavior of the cable and the faults caused by the defects in the cable termination under overvoltage has been examined. As test samples, 12 kV XLPE insulated cable is used and they were aged at three (3*U0) and five (5*U0) times the rated voltage. After each aging cycle, dielectric parameters of the cable were measured by an OMIRCRON CPC100/CPTD1 device, and the parti

APA, Harvard, Vancouver, ISO, and other styles

3

Desouky, S. S., A. Z. El-Dein, R. A. Abd El-Aal, and N. A. A. El-Rahman. "A New Contribution in Reducing Electric Field Distribution Within/Around Medium Voltage Underground Cable Terminations." Engineering, Technology & Applied Science Research 7, no. 5 (2017): 1962–66. http://dx.doi.org/10.48084/etasr.1357.

Full text

Abstract:

Ιn medium voltage cables, the stress control layers play an important part in controlling the electric field distribution around the medium voltage underground cable terminations. Underground cable accessories, used in medium voltage cable systems, need a stress control tube in order to maintain and control the insulation level which is designed for long life times. The term “electrical stress control” refers to the cable termination analysis of optimizing the electrical stress in the area of insulation shield cutback to reduce the electrical field concentration at this point in order to reduc

APA, Harvard, Vancouver, ISO, and other styles

4

Desouky, S. S., A. Z. El-Dein, El-Aal R. A. Abd, and N. A. A. El-Rahman. "A New Contribution in Reducing Electric Field Distribution Within/Around Medium Voltage Underground Cable Terminations." Engineering, Technology & Applied Science Research 7, no. 5 (2017): Engineering, Technology & Applied Science Research. https://doi.org/10.5281/zenodo.1037193.

Full text

Abstract:

Ιn medium voltage cables, the stress control layers play an important part in controlling the electric field distribution around the medium voltage underground cable terminations. Underground cable accessories, used in medium voltage cable systems, need a stress control tube in order to maintain and control the insulation level which is designed for long life times. The term “electrical stress control” refers to the cable termination analysis of optimizing the electrical stress in the area of insulation shield cutback to reduce the electrical field concentration at this point in order to reduc

APA, Harvard, Vancouver, ISO, and other styles

5

Andrade, Arthur F., Edson G. Costa, Filipe L. M. Andrade, Clarice S. H. Soares, and George R. S. Lira. "Design of Cable Termination for AC Breakdown Voltage Tests." Energies 12, no. 16 (2019): 3075. http://dx.doi.org/10.3390/en12163075.

Full text

Abstract:

International standards prescribe overvoltage tests to evaluate the insulating material performance of high-voltage cables. However, it is difficult to manage the electric fields at the cable ends when laboratory measurements are carried out because surface and external discharges occur at the cable termination. Therefore, this paper presents a procedure for designing cable terminations to reduce the electric field at the cable ends to appropriate levels even in the case of overvoltage tests. For this purpose, computer simulations of electric field distribution using the finite element method

APA, Harvard, Vancouver, ISO, and other styles

6

Nikolajevic, S. V., N. M. Pekaric-Nad, and R. M. Dimitrijevic. "Optimization of cable terminations." IEEE Transactions on Power Delivery 12, no. 2 (1997): 527–32. http://dx.doi.org/10.1109/61.584315.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Raicevic, Nebojsa B., and Nikola Raicevic. "Reducing the impact of ELF electromagnetic fields of HV power cables on the environment by modeling the cable accessories." COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 34, no. 4 (2015): 1016–28. http://dx.doi.org/10.1108/compel-10-2014-0251.

Full text

Abstract:

Purpose – Underground cables can produce higher electromagnetic fields directly above them than an overhead line. The majority of cable failures on distribution system are caused by defects in the cable accessories. Nowadays, significant research has been carried out worldwide into examining whether electricity, and in particular, the presence of electric and magnetic fields have an adverse impact on health, especially the occurrence of cancer and childhood leukemia. The purpose of this paper is to optimize the electric field distribution in underground cable accessories. This reduces the impa

APA, Harvard, Vancouver, ISO, and other styles

8

Ye, Hanyu, Tobias Fechner, Xianzhang Lei, et al. "Review on HVDC cable terminations." High Voltage 3, no. 2 (2018): 79–89. http://dx.doi.org/10.1049/hve.2017.0144.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Dimitrijevic, Radisa, Dragan Tasic, Nebojsa Raicevic, Slavoljub Aleksic, and Neda Pekaric-Nadj. "Analysis of a MV XLPE cable termination design with embedded electrodes." Facta universitatis - series: Electronics and Energetics 23, no. 1 (2010): 99–117. http://dx.doi.org/10.2298/fuee1001099d.

Full text

Abstract:

Insertion of embedded electrodes (EEs) inside a MV XLPE cable termination strongly affects electric field around the termination and accordingly must be carefully considered. In this paper, influence of embedded electrodes on voltage distribution in some constructions of the 20 kV cable terminations was analyzed. Different options were considered for a specific number of the EEs along the cable insulation surface, taking into account possible effects of floating or grounded EEs, their different position and separation. In every option, a basic method of stress relieving with resistive layer ov

APA, Harvard, Vancouver, ISO, and other styles

10

Song, Wen Wu, Meng Tao Qin, and Dong Dong Wang. "Study on the Cable Crosstalk of Ship Cabin." Applied Mechanics and Materials 719-720 (January 2015): 652–57. http://dx.doi.org/10.4028/www.scientific.net/amm.719-720.652.

Full text

Abstract:

The mechanism of cable crosstalk involving what and how does the factors affect the level of crosstalk is introduced in detail. A transmission line model for predicting crosstalk between power cable and the other wires nearby with common reference ground based on multiconductor transmission theory (MTL) is developed. Crosstalk among circuit configurations when the victim cables with load terminations are different types is analyzed and simulated. Models where the types of the victim lines are shielded coaxial cable, shielded twisted pair and unshielded twisted pair are simulated. It is found t

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Cable terminations"

1

Butler, Ethan L. (Ethal Landis). "Design and testing of vibration absorbing oceanographic cable terminations." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/40577.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hathaway, Graham Michael. "High temperature superconducting power cable termination." Thesis, University of Southampton, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.301206.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Gabrail, Philip, and Sam Samuelsson. "Analys av fältfördelning i kabelavslut av linjära och icke linjära material : Analysis of the field distribution in cable termination by linear and nonlinear material." Thesis, KTH, Data- och elektroteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-188414.

Full text

Abstract:

I nuläget används XLPE högspänningskablar vid överföring och distribution av elkraft och har en viktig roll i elsystemet. Kraftöverföring som sker över långa sträckor kopplas vidare från en punkt till en annan och sker med hjälp av kabelavslutningar. Dessa kabelavslutningar har en del sårbarheter ”felfunktion i kabelavslut” som påverkar hela elkraftsystemet. En analys och simulering av fältfördelning i kabelavslut genomfördes genom en teoretisk-respektive praktisk del i rapporten. Den teoretiska delen av rapporten genomfördes med hjälp av FEM programmet Comsol Multiphysics. Resultaten visade a

APA, Harvard, Vancouver, ISO, and other styles

4

Hamedi, Emilia. "Electrical connection for aluminium conductors in automotive applications : Prestudy of available solutions for electrical connection methods of aluminium cables." Thesis, KTH, Materialvetenskap, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-212545.

Full text

Abstract:

Due to increasing weight of electrical component and wiring harnesses in a vehicle contrary to the demand of light constructed vehicles as well as the constantly increasing and fluctuating price of copper compared to aluminium’s stable and far lower price, the use of aluminium conductors as an alternative have been promoted. This thesis work lay theoretical research of the available methods used for electrical connection of aluminium conductors in order to increase the knowledge about the available termination techniques. Due to aluminium’s characteristics such as lower conductivity and stre

APA, Harvard, Vancouver, ISO, and other styles

5

Bas, Gokcen. "Electric Field Analysis In Stress Controlled High Voltage Cables." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12605778/index.pdf.

Full text

Abstract:

The terminations and the joints are the basic accessories of the power cables. Power cables require electrical stress control when terminated. Since there are different types of terminations, the analysis should be done to choose the proper method for electric field control problem at the terminations. Throughout this study two different types of termination methods are investigated by using the finite element analysis program (ANSYS): Stress Controlled Termination Model with Deflector and Stress Control Tube (SCT). The results are compared with those obtained for a cable without stress contro

APA, Harvard, Vancouver, ISO, and other styles

6

Marzio, Enrico. "Accessori per sistemi in cavo nella trasmissione dell'energia elettrica in HVDC: definizione di modelli fisici per la caratterizzazione di materiali isolanti, semiconduttivi e varioresistivi." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amslaurea.unibo.it/11769/.

Full text

Abstract:

Lo studio intrapreso si è posto come obiettivo la caratterizzazione dal punto di vista elettrico dei materiali coinvolti nella realizzazione di accessori per applicazioni in HVDC, in particolare mescole isolanti, semiconduttive e varioresistive. La necessità di un lavoro di questo tipo viene giustificata dalla costante espansione dei sistemi in DC nella trasmissione dell’energia elettrica, i quali presentano caratteristiche fisiche che si differenziano sensibilmente da quelle tipiche dei tradizionali sistemi in AC, dunque richiedono componenti e materiali opportunamente progettati per garanti

APA, Harvard, Vancouver, ISO, and other styles

7

Pelikán, Luděk. "Měření částečných výbojů u vysokonapěťových kabelů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-376964.

Full text

Abstract:

The main topic of this work is the analysis of the measurement of partial discharge measurements on high voltage cables. The thesis also deals with other measurements, including the measurement of the loss factor and the voltage retention and breakdown test. Part of the text describes the issue of partial discharge, its measurement by galvanic method and methods of elimination of disturbing influences that affect this method in terms of sensitivity and accuracy of the measured values. Thesis also describes the construction of the cables, their marking and the tests carried out on them. There i

APA, Harvard, Vancouver, ISO, and other styles

8

Ching-ShanLin and 林清山. "Electrical Field Simulation for Improper Installation of Cable Terminations." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/23164130522110946474.

Full text

Abstract:

碩士<br>國立成功大學<br>電機工程學系專班<br>98<br>The purpose of this thesis is to study improper installation works for 15kV prefabricated type, heat shrinkable tubes and 25kV cold shrinkable tubes of cable terminations. By the finite element method (FEM), COMSOL multiphysics software tool to simulate electrical field effect to cable terminations under knife cut, wrong positioning and water contain sunken conditions. The following conclusions were got from simulation results,: (1) The knife cut sunken in cable termination may caused partial discharging after power on. (2) The wrong positioning sunken may cau

APA, Harvard, Vancouver, ISO, and other styles

9

Lee, Cheng-Hung, and 李政鴻. "Study on Connection Defects and Electric Stress of Underground Cable Terminations." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/40105101861522051946.

Full text

Abstract:

碩士<br>崑山科技大學<br>電機工程研究所<br>98<br>For safety and pleasant city out looking reasons, the underground-type transmission/distribution system was widely adopted by TPC in recent years. Especially more and more 69kV~345kV level electricity power by HV underground power cables are supplied to city center through connection stations. The connection technique becomes an important topic of power system reliability. This thesis focuses on the 161 XLPE underground power cables. Firstly, the structure of power cable and electric stress are studied. Then the connection method for terminations of power cable

APA, Harvard, Vancouver, ISO, and other styles

10

Banerjee, Sarajit. "A Study of High Frequency Voltage Effects in Medium Voltage Cable Terminations." Thesis, 2008. http://hdl.handle.net/10012/3729.

Full text

Abstract:

High-power voltage sourced converters(VSC’s) are becoming increasingly prevalent in modern transmission systems. These systems primarily use switching schemes generating kHz range harmonics, which may be magnified by one or more system resonances. Despite the high frequency harmonics, VSC systems widely use insulated equipment designed for operation at power frequencies; this includes critical substation components such as medium voltage polymeric cables and terminations. The stress grading systems of non-geometric (compact) cable terminations are susceptible to insulation degradation and e

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Cable terminations"

1

Zhu, Daming. The detection of partial discharge in high voltage insulating materials, cable and cable terminations using acoustic emission techniques. University of Manchester, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Berteaux, Henri O. CTD electromechanical termination users manual. Woods Hole Oceanographic Institution, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Bowen, M. F. Loose-tube neutral tether fiber optic termination procedure. Woods Hole Oceanographic Institution, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Bowen, M. F. Loose-tube neutral tether fiber optic termination procedure. Woods Hole Oceanographic Institution, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Board, IEEE Standards, IEEE Standards Association, Institute of Electrical and Electronics Engineers., and IEEE Industry Applications Society. Petroleum and Chemical Industry Committee., eds. IEEE recommended practice for installation, termination, and testing of insulated power cable as used in industrial and commercial applications. Institute of Electrical and Electronics Engineers, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

IEEE Industry Applications Society. Petroleum and Chemical Industry Committee. and American National Standards Institute, eds. IEEE recommended practice for installation, termination, and testing of insulated power cable as used in the petroleum and chemical industry. Institute of Electrical and Electronics Engineers, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

NCCER. 33209-10 Wire and Cable terminations TG. Pearson Education, Limited, 2011.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

IEEE Standard Test Procedures and Requirements for High-Voltage Alternating Current Cable Terminations/48 1990. Ieee, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Cable terminations"

1

Miao, Runzhong, Chaoyang Sun, Xiangkuan Wan, Xinyi Liu, and Pinyin Gao. "Numerical Simulation for Electric Field of the 66 kV Cable Pro-molded Terminations." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1351-6_57.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Morton-Jones, David H., and John W. Ellis. "Heat-Shrinkable Terminations for Power Cables." In Polymer Products. Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4101-4_26.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Miao, Runzhong, Kezhong Mi, Yi Liu, Donghao Zhang, and Haonan Sun. "Simulation Research on Electric Field of 35 kV Cable Termination." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-0451-8_69.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Miao, Runzhong, Kaixin Wu, Donghao Zhang, and Zelong Wang. "Simulation Analysis of Electric Erosion Defect of 25kV Locomotive Cable Termination." In Proceedings of the 5th International Conference on Electrical Engineering and Information Technologies for Rail Transportation (EITRT) 2021. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-9905-4_73.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Rudikov, Dmitry, Victor Finochenko, and Kira Abdulmanova. "Mathematical Model for Evaluating the Vibroacoustic Characteristics of a Cable Termination Machine." In Fundamental and Applied Scientific Research in the Development of Agriculture in the Far East (AFE-2022). Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-36960-5_108.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Masuda, T., C. Suzawa, S. Isojima, T. Shimonosono, and S. Nagaya. "Development of the Termination for the 77kV-Class High Tc Superconducting Power Cable." In Advances in Superconductivity VIII. Springer Japan, 1996. http://dx.doi.org/10.1007/978-4-431-66871-8_295.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

"Underground Power Cable Construction." In Advances in Computer and Electrical Engineering. IGI Global, 2016. http://dx.doi.org/10.4018/978-1-4666-6509-5.ch001.

Full text

Abstract:

This chapter deals with many special features of underground power cables. Important points are presented in this chapter. In this chapter the various components of the different underground cables used in transmission and distribution of electric energy are explained. The materials used in the manufacture of these cables are given in details. This chapter also contains the different types of cable joints and terminations.

APA, Harvard, Vancouver, ISO, and other styles

8

"Section 37. Supply Cable Terminations." In National Electrical Safety Code Handbook. John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118098974.ch32.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

"Partial Discharges Measurements for Power Cable Insulation System." In Advances in Computer and Electrical Engineering. IGI Global, 2016. http://dx.doi.org/10.4018/978-1-4666-6509-5.ch014.

Full text

Abstract:

On-site PD measurements on high voltage cables have to concentrate on the cable accessories because there is a remaining risk for assembling faults on site. PD sensors with an appropriate coupling behavior to accessory-internal PD give sensitivities of a few pC or even better. Unfortunately, two main reasons prevent the general use of PD sensors in cable accessories. First of all, the costs for PD sensors have to be balanced with the costs of the accessories, importance of the cable link, consequential costs for outage etc. This is the reason why PD sensors were mainly used EHV cable systems.

APA, Harvard, Vancouver, ISO, and other styles

10

Medek, James, and Theodore Balaska. "Splicing, Terminating, and Accessories." In Electrical Power Cable Engineering. CRC Press, 1998. http://dx.doi.org/10.1201/9781420001037.ch12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cable terminations"

1

Frei, S., and R. Jobava. "Coupling of Inhomogeneous Fields into an Automotive Cable Harness with Arbitrary Terminations." In 14th International Zurich Symposium and Technical Exposition on Electromagnetic Compatibility. IEEE, 2001. https://doi.org/10.23919/emc.2001.10792032.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hoeft, Lothar O., and Joseph S. Hofstra. "Transfer Impedance of Overlapping Braided Cable Shields and Hose Clamp Shield Terminations." In EMC_1994_Wroclaw. IEEE, 1994. https://doi.org/10.23919/emc.1994.10833326.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Ryu, Chanyeol, Ho-Seung Kim, Ryul Hwang, Dong-Hun Oh, Min-ju Kim, and Bang-Wook Lee. "DC Partial Discharge Characteristics of MVDC Cable Terminations Considering Multi-Layer Interfaces Defect." In 2024 10th International Conference on Condition Monitoring and Diagnosis (CMD). IEEE, 2024. https://doi.org/10.23919/cmd62064.2024.10766313.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ryu, Chanyeol, Ryul Hwang, Bang-Wook Lee, Dong-Hun Oh, and Min-ju Kim. "Analyzing DC Partial Discharge Characteristics of Voids Defect in MVDC Switchboard Cable Terminations." In 2024 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). IEEE, 2024. https://doi.org/10.1109/ceidp61745.2024.10907315.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Kurihara, Takashi, Yuta Makino, Toshihiro Takahashi, and Tsuguhiro Takahash. "Evaluation and Ranking of Abnormal Conditions of Oil-Impregnated Insulation Systems in Aged Oil-Filled Cable Joints and Terminations Removed After Service." In 2024 10th International Conference on Condition Monitoring and Diagnosis (CMD). IEEE, 2024. https://doi.org/10.23919/cmd62064.2024.10766125.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Luo, Yi, Tobias Fechner, Ruoyu Xu, Haitian Wang, Wenpeng Li, and Mingyu Zhou. "Development of a COMSOL-Based Digital Twin for a HVDC Cable Termination." In 2024 IEEE International Conference on High Voltage Engineering and Applications (ICHVE). IEEE, 2024. http://dx.doi.org/10.1109/ichve61955.2024.10676054.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Luo, Guofang, Wangjun Deng, Wenlong Xu, and Haimin Hu. "Detection of cable termination stress cone lap defects by microwave reflection method." In 2024 4th International Conference on Electrical Engineering and Control Science (IC2ECS). IEEE, 2024. https://doi.org/10.1109/ic2ecs64405.2024.10928705.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Prakash, Raghu V., and Padmanabhan G. Vibhu. "Design and Analysis of Epoxy Based Cable Terminations for Marine Cables." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10384.

Full text

Abstract:

Abstract Synthetic fibers like Kevlar and Vectran are used as load carrying members in Electro-mechanical cables for marine applications. These cables have high strength, high modulus and very low water absorption rate which make them suitable materials for marine applications. The flexible electromechanical cables carry tensile load and electrical power along with data signals. Terminations are used to connect these cables to another cable or terminal. An efficient termination will ensure a load carrying capacity that is almost equal to the breaking load of the strength member of the cable. T

APA, Harvard, Vancouver, ISO, and other styles

9

van Leersum, B. J. A. M., F. J. K. Buesink, and F. B. J. Leferink. "Quantification of minimal needed cable terminations." In 2015 Asia-Pacific Symposium on Electromagnetic Compatibility (APEMC). IEEE, 2015. http://dx.doi.org/10.1109/apemc.2015.7175236.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Fisher, P. W. "Tri-Axial Cable Terminations for 1.3- and 3-kA HTS Cables." In ADVANCES IN CRYOGENIC ENGEINEERING: Transactions of the Cryogenic Engineering Conference - CEC. AIP, 2004. http://dx.doi.org/10.1063/1.1774768.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cable terminations"

1

St., M., ed. DOCSIS Cable Device MIB Cable Device Management Information Base for DOCSIS compliant Cable Modems and Cable Modem Termination Systems. RFC Editor, 1999. http://dx.doi.org/10.17487/rfc2669.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Woundy, R., and K. Marez. Cable Device Management Information Base for Data-Over-Cable Service Interface Specification (DOCSIS) Compliant Cable Modems and Cable Modem Termination Systems. RFC Editor, 2006. http://dx.doi.org/10.17487/rfc4639.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Woundy, R. Baseline Privacy Interface Management Information Base for DOCSIS Compliant Cable Modems and Cable Modem Termination Systems. RFC Editor, 2001. http://dx.doi.org/10.17487/rfc3083.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Ahmad, A., and G. Nakanishi. Event Notification Management Information Base for Data over Cable Service Interface Specifications (DOCSIS)-Compliant Cable Modems and Cable Modem Termination Systems. RFC Editor, 2006. http://dx.doi.org/10.17487/rfc4547.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Green, S., K. Ozawa, and A. Katsnelson. Management Information Base for Data Over Cable Service Interface Specification (DOCSIS) Cable Modems and Cable Modem Termination Systems for Baseline Privacy Plus. Edited by E. Cardona. RFC Editor, 2005. http://dx.doi.org/10.17487/rfc4131.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Sawyer, W. Management Information Base for Data Over Cable Service Interface Specification (DOCSIS) Cable Modem Termination Systems for Subscriber Management. RFC Editor, 2005. http://dx.doi.org/10.17487/rfc4036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!