Relevant bibliographies by topics / CAD modelování

Contents

  1. Dissertations / Theses
  2. Conference papers

Academic literature on the topic 'CAD modelování'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'CAD modelování.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "CAD modelování"

1

Kružík, Pavel. "Modelování vlastností EC motoru." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217620.

Full text
Abstract:
This thesis concludes a description of construction and functions of Electronically commutated motors. The main target is modelling of thermal field of Electronically commutated motors. For modelling was chosen Ansys Workbench setting with CAD geometry. There was a measurement for verifying result of simulation, and its proof is described in my thesis. This project also concludes comparison of results from simulation itself and results obtained from measuring thermal profile of EC motor.
APA, Harvard, Vancouver, ISO, and other styles
2

Gazda, Silvester. "Výpočtové modelování tuhosti záběru ozubených kol." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318524.

Full text
Abstract:
This master's thesis deals with the design of FEM model of gear pair with an intention to find out how stiffness changes during meshing. It firstly describes the necessary knowledge needed to analyse the problem, like the geometry of an involute tooth and evaluation of meshing stiffness. Followed by a description of work procedures from the creation of models through settings of mesh, contacts and analysis to evaluating of results.
APA, Harvard, Vancouver, ISO, and other styles
3

Prokeš, Marek. "Modely elektrických přístrojů v moderních CAD systémech." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217604.

Full text
Abstract:
In this master thesis the new possibilities of software Autodesk Inventor Professional 2008 are described. Autodesk Inventor is a system for 3D machine engineering containing tools for 3D modeling, information management, cooperation and technical support. Autodesk Inventor Professional 2008 has a lot of new possibilities and improvements compared to the previous version. This Master thesis contains also description of the circuit breaker BD250N and its utilization in the distribution of low voltage. In enclosed CD the model animation of circuit breaker with description of modeling process can be found. The Autodesk Inventor Professional 2008 is used for this master’s thesis – English version.
APA, Harvard, Vancouver, ISO, and other styles
4

Sedláček, Petr. "Pevnostní a modální analýza v parametrických adaptivních CAD programech." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218805.

Full text
Abstract:
This thesis is focusing on the use of the finite element method (FEM) in program environment of Autodesk Inventor Professional (AIP) 2010. For the analysis of the components or assemblies with FEM serves the Strength analysis module of the AIP 2010, whose environment and functions are detailed in this thesis. At the conclusion practical examples of modal and static analysis on the synchronous generator rotor model are demonstrated including a brief evaluation of the results.
APA, Harvard, Vancouver, ISO, and other styles
5

Semerák, Jaroslav. "Deformační a napěťová analýza dolní čelisti s fixátorem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382557.

Full text
Abstract:
This diploma thesis deals with fixation of the lower jaw fractures using commercially produced fixators. The topic was researched on the basis of the available literature. The thesis also indicates basic anatomy of the surveyed area and nowadays the most commonly used materials. Subsequently, the stress-strain analysis of the lower jaw with the applied angular stable fixation plate was performed. The solution was performed for the lower jaw with a fracture in the area of the condyle with different types of fixation plates made of CP-Ti Grade 4. In addition, the strain analysis of the healed lower jaw with the fixators after the defect in the area of chin and angle was performed. The mechanical interaction analysis of the lower jaw with defect and applied fixation plate was solved by using computational modeling with variational approach, in use of the finite element method in Ansys Workbench 18.1. The thesis also describes in detail the creation of a computational model of the system and the subsequent solution.
APA, Harvard, Vancouver, ISO, and other styles
6

Foretník, Jan. "Architektura, geometrie a výpočetní technika." Doctoral thesis, Vysoké učení technické v Brně. Fakulta architektury, 2010. http://www.nusl.cz/ntk/nusl-233224.

Full text
Abstract:
The topic of this thesis is geometry, its practical usage in architect’s profession (especially its application in computer design and realization of buildings) and its current way of teaching at schools of architecture. The thesis systematically describes geometric objects’ construction and properties, its modelling in CAD systems and examples of its usage in architecture, in some cases including the way of its realization. Geometric objects are systematically organized into chapters about point, curves, surfaces and solids. The outcome of the thesis is a concept of geometry courses modification in the way that they encourage the spatial imagination development instead of “drill” and the gained knowledge is directly useful in architect’s profession. A supplementary research (in appendix) analyses the state-of-the-art of teaching of geometry at selected schools of architecture in Europe and its effect to spatial imagination development. The research was focused at contents and form of the selected geometry courses and its influence to spatial imagination.
APA, Harvard, Vancouver, ISO, and other styles
7

Fňukal, Jan. "Deformační a napěťová analýza dolní čelisti s aplikovaným fixátorem v důsledku deficitu kostní tkáně." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318654.

Full text
Abstract:
This thesis deals with the fixation of lower jaw with bone tissue defect using commercially produced fixator. Large defects of bone tissue are mainly caused due to the removal of bone tissue affected by tumor. These topics have been researched on the basis of the literature. Subsequently, stress strain analysis of the lower jaw with the applied fixation plate was performed. This analysis was solved by using computational modeling with variational approach, ie the finite element method. The work also describes in detail the procedure of creating model of geometry, model of material, model of boundary conditions and loads with subsequent solution of several computational models. The stress strain analysis was done for lower jaw with varying size of the removed bone tissue with applied reconstruction plate made of CP-Ti Grade 4 and for the lower jaw with the plate, which is made of -Ti-Mo. Finally, the influence of the mechanical properties of the callus during formation of new bone tissue (callus healing) on the stress and deformation of the solved system was evaluated.
APA, Harvard, Vancouver, ISO, and other styles
8

Gayer, Tomáš. "Konstrukce rámu lehokola." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228873.

Full text
Abstract:
The aim of this diploma thesis is evolution of the new model of tricycle. This thesis describes process of engineering from design of several parts and whole frame in CAD system Autodesk Inventor, to creating complete drawing documentation. Next part of this thesis is focused on basic static-structural analysis using finite element method in software ANSYS Workbench and determining boundary conditions for this analysis. The final part is about visualization of the new tricycle.
APA, Harvard, Vancouver, ISO, and other styles
9

FIKTUSOVÁ, Jana. "Vytvoření učebních podpor k předmětu "Počítačové modelování a výpočty v technice"." Master's thesis, 2012. http://www.nusl.cz/ntk/nusl-120243.

Full text
Abstract:
This diploma thesis offers to the reader the basic overview of the most used methods of computer simulation and accessible software which can be used for this purpose. The aim of the thesis is not a detailed description of individual procedures, but rather a creation of overview text which can be used by the reader as a material for the primary orientation to the given problems. The thesis is outlined as a proposal of the themes of lectures of the subject ?Computer simulation and calculations in technology?. The thesis is divided into three thematic blocks. In the first block, the reader is acquainted with the programming language MATLAB, with its possibility of application in study as well as in practice. The second block acquaints with the CAD systems and the last block presents a nearer usage of individual software applications during the solution of selected model situations.
APA, Harvard, Vancouver, ISO, and other styles
10

SOSNA, Tomáš. "Techniky vytváření plechových dílů ve vybraných CAD systémech se zaměřením na 3D modeláře Inventor a SolidWorks." Master's thesis, 2017. http://www.nusl.cz/ntk/nusl-317484.

Full text
Abstract:
The first part of the thesis is theoretical and contains basic concepts of design in 3D CAD systems. The next part is focused on tools for the production of classical components and their compilation, including examples. The following part contains tools and environment for the production of sheet metal parts and their assembly including examples. The penultimate part is focused on the manufacture of components of a unilateral lock and its assembly including fittings. The last part consists of a research probe that focuses on technical schools and companies. At the end of the thesis, Autodesk Inventor and SolidWorks are compared.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "CAD modelování"

1

Botlík, Josef. "Modelování struktur v regionální analýze – segment dat Covid 19." In XXIV. mezinárodního kolokvia o regionálních vědách. Brno: Masaryk University Press, 2021. http://dx.doi.org/10.5817/cz.muni.p210-9896-2021-66.

Full text
Abstract:
Regional sciences are based on specific research methods, taking into account the analyzed factors and regional breakdown. In most cases, the analyzes fail to take into account the links between the analyzed factors and the geopolitical location of the region. The work presents the possibilities of analysis using precedent modeling, through which analyzes can be performed with respect to geographical links. The aim of our research was to demonstrate the suitability of implementing a precedent model for predicting the development of an increase in Covid positive cases at the level of Czech municipalities. The precedent analysis enables the simplification of a part of the mathematical analytical apparatus into a binary form. The data are presented in a selected time interval limited by the closure of districts at the level of municipalities with extended powers (MEP). The research is based on the research question of whether it can be effectively evaluated using a precedent model of regional disparity. The basic method of research is precedent analysis and subsequent mathematical and statistical analysis, especially the determination of guidelines for the development of precedents at weekly intervals. The result of the presented part of the research is a summary of the MEP according to the potential of the Covid threat. The structure mapping in the presented model identified MEP groups, which are local extremes of the observed values. Thus, municipalities that are potential sources of Covid virus infection and municipalities that are potential sites endangered by the virus were identified.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography